Merge pull request #337 from GSI-CS-CO/fallout_a10_sys_pll_fix

Fallout a10 sys pll fix

Makefile

@@ -214,6 +214,12 @@ riscv-toolchain:	riscv-toolchain-download
 	test -d riscv-toolchain || tar zxvf riscv_gcc.tgz -o
 	test -d riscv-11.2-small && mv riscv-11.2-small riscv-toolchain || true
 
+lm32-cluster-testbench-run:: lm32-toolchain hdlmake_install
+	make -C testbench/lm32_cluster/test run
+
+lm32-cluster-testbench-clean:: lm32-toolchain hdlmake_install
+	make -C testbench/lm32_cluster/test clean
+
 riscv-toolchain-clean::
 	rm -rf riscv_gcc.tgz || true
 	rm -rf riscv-toolchain || true

README.md

@@ -13,6 +13,7 @@ GSI Timing Gateware and Tools
   - [Additional Targets](#additional-targets)
     - [Check Timing Constraints](#check-timing-constraints)
     - [Sort QSF Files](#sort-qsf-files)
+    - [LM32 Cluster Testbench](#lm32-cluster-testbench)
 - [FAQ and Common Problems](#faq-and-common-problems)
   - [Synthesis](#synthesis)
     - [Quartus Version](#quartus-version)
@@ -148,6 +149,13 @@ make $device-sort
 make exploder5-sort # example
 ```
 
+### LM32 Cluster Testbench
+
+```
+make lm32-cluster-testbench-run
+```
+[Click here for additional information.](testbench/lm32_cluster/test/REAME.md)
+
 # FAQ and Common Problems
 
 ## Synthesis

modules/pll/arria10/sys_fpll10/sys_fpll10.qsys

@@ -6,7 +6,7 @@
    version="1.0"
    description=""
    tags="INTERNAL_COMPONENT=true"
-   categories="" />
+   categories="System" />
  <parameter name="bonusData"><![CDATA[bonusData 
 {
    element xcvr_fpll_a10_0
@@ -98,7 +98,7 @@
  <module
    name="xcvr_fpll_a10_0"
    kind="altera_xcvr_fpll_a10"
-   version="16.0"
+   version="18.1"
    enabled="1"
    autoexport="1">
   <parameter name="base_device" value="NIGHTFURY4" />
@@ -127,6 +127,7 @@
   <parameter name="gui_desired_outclk2_frequency" value="20.0" />
   <parameter name="gui_desired_outclk3_frequency" value="10.0" />
   <parameter name="gui_desired_refclk_frequency" value="100.0" />
+  <parameter name="gui_enable_50G_support" value="false" />
   <parameter name="gui_enable_active_clk" value="false" />
   <parameter name="gui_enable_cascade_out" value="false" />
   <parameter name="gui_enable_clk_bad" value="false" />
@@ -143,6 +144,7 @@
   <parameter name="gui_hssi_output_clock_frequency" value="1250.0" />
   <parameter name="gui_hssi_prot_mode" value="0" />
   <parameter name="gui_iqtxrxclk_outclk_index" value="0" />
+  <parameter name="gui_is_downstream_cascaded_pll" value="false" />
   <parameter name="gui_number_of_output_clocks" value="4" />
   <parameter name="gui_operation_mode" value="0" />
   <parameter name="gui_outclk0_actual_phase_shift" value="0.0" />
@@ -190,25 +192,12 @@
   <parameter name="rcfg_h_file_enable" value="0" />
   <parameter name="rcfg_jtag_enable" value="0" />
   <parameter name="rcfg_mif_file_enable" value="0" />
-  <parameter name="rcfg_multi_enable" value="0" />
-  <parameter name="rcfg_profile_cnt" value="2" />
-  <parameter name="rcfg_profile_data0" value="" />
-  <parameter name="rcfg_profile_data1" value="" />
-  <parameter name="rcfg_profile_data2" value="" />
-  <parameter name="rcfg_profile_data3" value="" />
-  <parameter name="rcfg_profile_data4" value="" />
-  <parameter name="rcfg_profile_data5" value="" />
-  <parameter name="rcfg_profile_data6" value="" />
-  <parameter name="rcfg_profile_data7" value="" />
-  <parameter name="rcfg_profile_select" value="1" />
-  <parameter name="rcfg_reduced_files_enable" value="0" />
   <parameter name="rcfg_separate_avmm_busy" value="0" />
   <parameter name="rcfg_sv_file_enable" value="0" />
   <parameter name="rcfg_txt_file_enable" value="0" />
   <parameter name="set_altera_xcvr_fpll_a10_calibration_en" value="1" />
   <parameter name="set_capability_reg_enable" value="0" />
   <parameter name="set_csr_soft_logic_enable" value="0" />
-  <parameter name="set_rcfg_emb_strm_enable" value="0" />
   <parameter name="set_user_identifier" value="0" />
   <parameter name="silicon_rev" value="false" />
   <parameter name="support_mode" value="user_mode" />