Merge Upstream to latest testing branch #5

Jimbo77 · 2021-04-03T22:15:42Z

Merge Upstream-Track to Testing-2.5.0

[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ] A dummy zero bit is sent preceding the data during a read transfer by the Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift of data during a read. In order to ignore this bit a quirk can be added to send an extra zero bit after the read address. Add a quirk to ignore the zero bit sent before data by adding a zero bit after the read address. [1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ] The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets programmed to some different values on a per-model basis. At least, this is what we intend to do here; Unfortunately, though, this register is being overwritten with a static magic number, right after applying the GPU-specific configuration (including the GPU-specific quirks) and that is effectively nullifying the efforts. Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL register in order to retain the wanted configuration for the target GPU. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5f7dfda4f2cec580c135fd81d96a05006651c128 ] The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so set the quirk. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Ross Schmidt <ross.schm.dev@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210310132319.708237392@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream. Apparently, <linux/netfilter/nfnetlink_cthelper.h> and <linux/netfilter/nfnetlink_acct.h> could not be included into the same compilation unit because of a cut-and-paste typo in the former header. Fixes: 12f7a50 ("netfilter: add user-space connection tracking helper infrastructure") Cc: <stable@vger.kernel.org> # v3.6 Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a4dcfbc4ee2218abd567d81d795082d8d4afcdf6 upstream. netif_device_attach() will unpause the queues so we can't call it before __alx_open(). This went undetected until commit b099922 ("alx: add ability to allocate and free alx_napi structures") but now if stack tries to xmit immediately on resume before __alx_open() we'll crash on the NAPI being null: BUG: kernel NULL pointer dereference, address: 0000000000000198 CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G OE 5.10.0-3-amd64 #1 Debian 5.10.13-1 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77-D3H, BIOS F15 11/14/2013 RIP: 0010:alx_start_xmit+0x34/0x650 [alx] Code: 41 56 41 55 41 54 55 53 48 83 ec 20 0f b7 57 7c 8b 8e b0 0b 00 00 39 ca 72 06 89 d0 31 d2 f7 f1 89 d2 48 8b 84 df RSP: 0018:ffffb09240083d28 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffffa04d80ae7800 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffffa04d80afa000 RDI: ffffa04e92e92a00 RBP: 0000000000000042 R08: 0000000000000100 R09: ffffa04ea3146700 R10: 0000000000000014 R11: 0000000000000000 R12: ffffa04e92e92100 R13: 0000000000000001 R14: ffffa04e92e92a00 R15: ffffa04e92e92a00 FS: 0000000000000000(0000) GS:ffffa0508f600000(0000) knlGS:0000000000000000 i915 0000:00:02.0: vblank wait timed out on crtc 0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 000000004460a001 CR4: 00000000001706f0 Call Trace: dev_hard_start_xmit+0xc7/0x1e0 sch_direct_xmit+0x10f/0x310 Cc: <stable@vger.kernel.org> # 4.9+ Fixes: bc2bebe ("alx: remove WoL support") Reported-by: Zbynek Michl <zbynek.michl@gmail.com> Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=983595 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Zbynek Michl <zbynek.michl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b9ea7206d7e1fdd7419cbd10badd3b2c80d04b4 upstream. When transmitting to a receiver in dynamic SMPS mode, all transmissions that use multiple spatial streams need to be sent using CTS-to-self or RTS/CTS to give the receiver's extra chains some time to wake up. This fixes the tx rate getting stuck at <= MCS7 for some clients, especially Intel ones, which make aggressive use of SMPS. Cc: stable@vger.kernel.org Reported-by: Martin Kennedy <hurricos@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210214184911.96702-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89e5c58fc1e2857ccdaae506fb8bc5fed57ee063 upstream. We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the csum for the UDP header itself is 0. In that case, GRO aggregation does not take place on the phys dev, but instead is deferred to the vxlan/geneve driver (see trace below). The reason is essentially that GRO aggregation bails out in udp_gro_receive() for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e, others) where for non-zero csums 2abb7cd ("udp: Add support for doing checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE and napi context has csum_valid set. This is however not the case for zero UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false). At the same time 57c67ff ("udp: additional GRO support") added matches on !uh->check ^ !uh2->check as part to determine candidates for aggregation, so it certainly is expected to handle zero csums in udp_gro_receive(). The purpose of the check added via 662880f ("net: Allow GRO to use and set levels of checksum unnecessary") seems to catch bad csum and stop aggregation right away. One way to fix aggregation in the zero case is to only perform the !csum_valid check in udp_gro_receive() if uh->check is infact non-zero. Before: [...] swapper 0 [008] 731.946506: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100400 len=1500 (1) swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100200 len=1500 swapper 0 [008] 731.946507: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101100 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101700 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101b00 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100600 len=1500 swapper 0 [008] 731.946508: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100f00 len=1500 swapper 0 [008] 731.946509: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100a00 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100500 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100700 len=1500 swapper 0 [008] 731.946516: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101d00 len=1500 (2) swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101000 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101c00 len=1500 swapper 0 [008] 731.946517: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101400 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100e00 len=1500 swapper 0 [008] 731.946518: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497101600 len=1500 swapper 0 [008] 731.946521: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff966497100800 len=774 swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1) swapper 0 [008] 731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112 (2) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 13129.24 After: [...] swapper 0 [026] 521.862641: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479000 len=11286 (1) swapper 0 [026] 521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d478500 len=2898 (2) swapper 0 [026] 521.862650: net:netif_receive_skb: dev=enp10s0f0 skbaddr=0xffff93ab0d479f00 len=8490 (3) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848 (2) swapper 0 [026] 521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440 (3) [...] # netperf -H 10.55.10.4 -t TCP_STREAM -l 20 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.01 24576.53 Fixes: 57c67ff ("udp: additional GRO support") Fixes: 662880f ("net: Allow GRO to use and set levels of checksum unnecessary") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tom Herbert <tom@herbertland.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e78b2915517e8fcadb1bc130ad6aeac7099e510c upstream. Introduce a new optional header_ops callback called parse_protocol and a wrapper function dev_parse_header_protocol, similar to dev_parse_header. The new callback's purpose is to extract the protocol number from the L2 header, the format of which is known to the driver, but not to the upper layers of the stack. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…before setting skb ownership commit e940e0895a82c6fbaa259f2615eb52b57ee91a7e upstream. There are two ref count variables controlling the free()ing of a socket: - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() - struct sock::sk_wmem_alloc - which accounts the memory allocated by the skbs in the send path. In case there are still TX skbs on the fly and the socket() is closed, the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb, calls sock_hold() on the original socket and references it. This produces the following back trace: | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 | refcount_t: addition on 0; use-after-free. | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | Backtrace: | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) To fix this problem, only set skb ownership to sockets which have still a ref count > 0. Fixes: 0ae89be ("can: add destructor for self generated skbs") Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 449052cfebf624b670faa040245d3feed770d22f upstream. Assert HALT bit to enter freeze mode, there is a premise that FRZ bit is asserted. This patch asserts FRZ bit in flexcan_chip_freeze, although the reset value is 1b'1. This is a prepare patch, later patch will invoke flexcan_chip_freeze() to enter freeze mode, which polling freeze mode acknowledge. Fixes: b1aa1c7 ("can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze") Link: https://lore.kernel.org/r/20210218110037.16591-2-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ec15e27cc8904605846a354bb1f808ea1432f853 upstream. RX FIFO enable failed could happen when do system reboot stress test: [ 0.303958] flexcan 5a8d0000.can: 5a8d0000.can supply xceiver not found, using dummy regulator [ 0.304281] flexcan 5a8d0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.314640] flexcan 5a8d0000.can: registering netdev failed [ 0.320728] flexcan 5a8e0000.can: 5a8e0000.can supply xceiver not found, using dummy regulator [ 0.320991] flexcan 5a8e0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.331360] flexcan 5a8e0000.can: registering netdev failed [ 0.337444] flexcan 5a8f0000.can: 5a8f0000.can supply xceiver not found, using dummy regulator [ 0.337716] flexcan 5a8f0000.can (unnamed net_device) (uninitialized): Could not enable RX FIFO, unsupported core [ 0.348117] flexcan 5a8f0000.can: registering netdev failed RX FIFO should be enabled after the FRZ/HALT are valid. But the current code enable RX FIFO and FRZ/HALT at the same time. Fixes: e955cea ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20210218110037.16591-3-qiangqing.zhang@nxp.com Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8e24edddad152b998b37a7f583175137ed2e04a5 upstream. nested target/match_revfn() calls work with xt[NFPROTO_UNSPEC] lists without taking xt[NFPROTO_UNSPEC].mutex. This can race with module unload and cause host to crash: general protection fault: 0000 [#1] Modules linked in: ... [last unloaded: xt_cluster] CPU: 0 PID: 542455 Comm: iptables RIP: 0010:[<ffffffff8ffbd518>] [<ffffffff8ffbd518>] strcmp+0x18/0x40 RDX: 0000000000000003 RSI: ffff9a5a5d9abe10 RDI: dead000000000111 R13: ffff9a5a5d9abe10 R14: ffff9a5a5d9abd8c R15: dead000000000100 (VvS: %R15 -- &xt_match, %RDI -- &xt_match.name, xt_cluster unregister match in xt[NFPROTO_UNSPEC].match list) Call Trace: [<ffffffff902ccf44>] match_revfn+0x54/0xc0 [<ffffffff902ccf9f>] match_revfn+0xaf/0xc0 [<ffffffff902cd01e>] xt_find_revision+0x6e/0xf0 [<ffffffffc05a5be0>] do_ipt_get_ctl+0x100/0x420 [ip_tables] [<ffffffff902cc6bf>] nf_getsockopt+0x4f/0x70 [<ffffffff902dd99e>] ip_getsockopt+0xde/0x100 [<ffffffff903039b5>] raw_getsockopt+0x25/0x50 [<ffffffff9026c5da>] sock_common_getsockopt+0x1a/0x20 [<ffffffff9026b89d>] SyS_getsockopt+0x7d/0xf0 [<ffffffff903cbf92>] system_call_fastpath+0x25/0x2a Fixes: 656caff ("netfilter 04/09: x_tables: fix match/target revision lookup") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d0bd52c591a1070c54dc428e926660eb4f981099 upstream. Commit b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet") fixes a possible OOB access but it introduces a memory leak since the pending frame is not released to page_frag_cache if the frag array of skb_shared_info is full. Commit 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes the issue but does not free the truncated skb that is forwarded to mac80211 layer. Fix the leftover issue discarding even truncated skbs. Fixes: 93a1d4791c10 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7db48e983930285b765743ebd665aecf9850582b ] There are few places where we fetch tp->copied_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->copied_seq) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0f31746452e6793ad6271337438af8f4defb8940 ] There are few places where we fetch tp->write_seq while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8811f4a9836e31c14ecdf79d9f3cb7c5d463265d ] Qingyu Li reported a syzkaller bug where the repro changes RCV SEQ _after_ restoring data in the receive queue. mprotect(0x4aa000, 12288, PROT_READ) = 0 mmap(0x1ffff000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x1ffff000 mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 mmap(0x21000000, 4096, PROT_NONE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x21000000 socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(0), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "::1", &sin6_addr), sin6_scope_id=0}, 28) = 0 setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [1], 4) = 0 sendmsg(3, {msg_name=NULL, msg_namelen=0, msg_iov=[{iov_base="0x0000000000000003\0\0", iov_len=20}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 setsockopt(3, SOL_TCP, TCP_REPAIR, [0], 4) = 0 setsockopt(3, SOL_TCP, TCP_QUEUE_SEQ, [128], 4) = 0 recvfrom(3, NULL, 20, 0, NULL, NULL) = -1 ECONNRESET (Connection reset by peer) syslog shows: [ 111.205099] TCP recvmsg seq # bug 2: copied 80, seq 0, rcvnxt 80, fl 0 [ 111.207894] WARNING: CPU: 1 PID: 356 at net/ipv4/tcp.c:2343 tcp_recvmsg_locked+0x90e/0x29a0 This should not be allowed. TCP_QUEUE_SEQ should only be used when queues are empty. This patch fixes this case, and the tx path as well. Fixes: ee99528 ("tcp: Initial repair mode") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=212005 Reported-by: Qingyu Li <ieatmuttonchuan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 14302ee3301b3a77b331cc14efb95bf7184c73cc upstream. In cifs_statfs(), if server->ops->queryfs is not NULL, then we should use its return value rather than always returning 0. Instead, use rc variable as it is properly set to 0 in case there is no server->ops->queryfs. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ion names commit 9c8e2f6d3d361439cc6744a094f1c15681b55269 upstream. When building with -ffunction-sections, the compiler will place each function into its own ELF section, prefixed with ".text". For example, a simple test module with functions test_module_do_work() and test_module_wq_func(): % objdump --section-headers test_module.o | awk '/\.text/{print $2}' .text .text.test_module_do_work .text.test_module_wq_func .init.text .exit.text Adjust the recordmcount scripts to look for ".text" as a section name prefix. This will ensure that those functions will be included in the __mcount_loc relocations: % objdump --reloc --section __mcount_loc test_module.o OFFSET TYPE VALUE 0000000000000000 R_X86_64_64 .text.test_module_do_work 0000000000000008 R_X86_64_64 .text.test_module_wq_func 0000000000000010 R_X86_64_64 .init.text Link: http://lkml.kernel.org/r/1542745158-25392-2-git-send-email-joe.lawrence@redhat.com Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Manoj Gupta <manojgupta@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9b1ea29bc0d7b94d420f96a0f4121403efc3dd85 upstream. This reverts commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf. The kernel test robot reports a huge performance regression due to the commit, and the reason seems fairly straightforward: when there is contention on the page list (which is what causes acquire_slab() to fail), we do _not_ want to just loop and try again, because that will transfer the contention to the 'n->list_lock' spinlock we hold, and just make things even worse. This is admittedly likely a problem only on big machines - the kernel test robot report comes from a 96-thread dual socket Intel Xeon Gold 6252 setup, but the regression there really is quite noticeable: -47.9% regression of stress-ng.rawpkt.ops_per_sec and the commit that was marked as being fixed (7ced371: "slub: Acquire_slab() avoid loop") actually did the loop exit early very intentionally (the hint being that "avoid loop" part of that commit message), exactly to avoid this issue. The correct thing to do may be to pick some kind of reasonable middle ground: instead of breaking out of the loop on the very first sign of contention, or trying over and over and over again, the right thing may be to re-try _once_, and then give up on the second failure (or pick your favorite value for "once"..). Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/ Cc: Jann Horn <jannh@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c91bc3d44dfef8284af384877fbe61117e8b7d1 upstream. According to the SH7710, SH7712, SH7713 Group User's Manual: Hardware, Rev. 3.00, the TRSCER register actually has only bit 7 valid (and named differently), with all the other bits reserved. Apparently, this was not the case with some early revisions of the manual as we have the other bits declared (and set) in the original driver. Follow the suit and add the explicit sh_eth_cpu_data::trscer_err_mask initializer for SH771x... Fixes: 86a74ff ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 924a9bc362a5223cd448ca08c3dde21235adc310 upstream. For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't set) based on the type in the virtio net hdr, but the skb could contain anything since it could come from packet_snd through a raw socket. If there is a mismatch between what virtio_net_hdr_set_proto sets and the actual protocol, then the skb could be handled incorrectly later on. An example where this poses an issue is with the subsequent call to skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set correctly. A specially crafted packet could fool skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned. Avoid blindly trusting the information provided by the virtio net header by checking that the protocol in the packet actually matches the protocol set by virtio_net_hdr_set_proto. Note that since the protocol is only checked if skb->dev implements header_ops->parse_protocol, packets from devices without the implementation are not checked at this stage. Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets") Signed-off-by: Balazs Nemeth <bnemeth@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d348ede32e99d3a04863e9f9b28d224456118c27 upstream. A packet with skb_inner_network_header(skb) == skb_network_header(skb) and ETH_P_MPLS_UC will prevent mpls_gso_segment from pulling any headers from the packet. Subsequently, the call to skb_mac_gso_segment will again call mpls_gso_segment with the same packet leading to an infinite loop. In addition, ensure that the header length is a multiple of four, which should hold irrespective of the number of stacked labels. Signed-off-by: Balazs Nemeth <bnemeth@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 00ff801bb8ce6711e919af4530b6ffa14a22390a upstream. This patch fixes a bug that the moderation config will not be applied when calling mlx4_en_reset_config. For example, when turning on rx timestamping, mlx4_en_reset_config() will be called, causing the NIC to forget previous moderation config. This fix is in phase with a previous fix: commit 79c54b6 ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called") Tested: Before this patch, on a host with NIC using mlx4, run netserver and stream TCP to the host at full utilization. $ sar -I SUM 1 INTR intr/s 14:03:56 sum 48758.00 After rx hwtstamp is enabled: $ sar -I SUM 1 14:10:38 sum 317771.00 We see the moderation is not working properly and issued 7x more interrupts. After the patch, and turned on rx hwtstamp, the rate of interrupts is as expected: $ sar -I SUM 1 14:52:11 sum 49332.00 Fixes: 79c54b6 ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called") Signed-off-by: Kevin(Yudong) Yang <yyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> CC: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 879c348c35bb5fb758dd881d8a97409c1862dae8 upstream. We introduce dwmac410_dma_init_channel() here for both EQoS v4.10 and above which use different DMA_CH(n)_Interrupt_Enable bit definitions for NIE and AIE. Fixes: 48863ce ("stmmac: add DMA support for GMAC 4.xx") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Ramesh Babu B <ramesh.babu.b@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bfc2560563586372212b0a8aeca7428975fa91fe upstream. This is a follow up of commit ea32746 ("net: sched: avoid duplicates in qdisc dump") which has fixed the issue only for the qdisc dump. The duplicate printing also occurs when dumping the classes via tc class show dev eth0 Fixes: 59cc1f6 ("net: sched: convert qdisc linked list to hashtable") Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6c59cff38e66584ae3ac6c2f0cbd8d039c710ba7 upstream. There's no reason for preventing the creation and removal of qmimux network interfaces when the underlying interface is up. This makes qmi_wwan mux implementation more similar to the rmnet one, simplifying userspace management of the same logical interfaces. Fixes: c6adf77 ("net: usb: qmi_wwan: add qmap mux protocol support") Reported-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad5d07f4a9cd671233ae20983848874731102c08 upstream. The current CIPSO and CALIPSO refcounting scheme for the DOI definitions is a bit flawed in that we: 1. Don't correctly match gets/puts in netlbl_cipsov4_list(). 2. Decrement the refcount on each attempt to remove the DOI from the DOI list, only removing it from the list once the refcount drops to zero. This patch fixes these problems by adding the missing "puts" to netlbl_cipsov4_list() and introduces a more conventional, i.e. not-buggy, refcounting mechanism to the DOI definitions. Upon the addition of a DOI to the DOI list, it is initialized with a refcount of one, removing a DOI from the list removes it from the list and drops the refcount by one; "gets" and "puts" behave as expected with respect to refcounts, increasing and decreasing the DOI's refcount by one. Fixes: b1edeb1 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Fixes: d7cce01 ("netlabel: Add support for removing a CALIPSO DOI.") Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7d9d4854519fdf4d45c70a4d953438cd88e7e58 upstream. For the devices in this driver, the default qdisc is "noqueue", because their "tx_queue_len" is 0. In function "__dev_queue_xmit" in "net/core/dev.c", devices with the "noqueue" qdisc are specially handled. Packets are transmitted without being queued after a "dev->flags & IFF_UP" check. However, it's possible that even if this check succeeds, "ops->ndo_stop" may still have already been called. This is because in "__dev_close_many", "ops->ndo_stop" is called before clearing the "IFF_UP" flag. If we call "netif_stop_queue" in "ops->ndo_stop", then it's possible in "__dev_queue_xmit", it sees the "IFF_UP" flag is present, and then it checks "netif_xmit_stopped" and finds that the queue is already stopped. In this case, it will complain that: "Virtual device ... asks to queue packet!" To prevent "__dev_queue_xmit" from generating this complaint, we should not call "netif_stop_queue" in "ops->ndo_stop". We also don't need to call "netif_start_queue" in "ops->ndo_open", because after a netdev is allocated and registered, the "__QUEUE_STATE_DRV_XOFF" flag is initially not set, so there is no need to call "netif_start_queue" to clear it. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ac88c531a5b38877eba2365a3f28f0c8b513dc33 upstream. When the probe fails or requests to be defered, we must disable the regulator that was previously enabled. Fixes: 7994fe5 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4eacfe72e3e037e3fc019113df32c39a705148c2 ] Expose error value when failing to comply to command: $ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off] Fixes: be7e87f ("net/mlx5e: Fail safe cqe compressing/moderation mode setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…g server [ Upstream commit 3408be145a5d6418ff955fe5badde652be90e700 ] Not setting the ipv6 bit while destroying ipv6 listening servers may result in potential fatal adapter errors due to lookup engine memory hash errors. Therefore always set ipv6 field while destroying ipv6 listening servers. Fixes: 830662f ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05a68ce5fa51a83c360381630f823545c5757aa2 ] For kuprobe and tracepoint bpf programs, kernel calls trace_call_bpf() which calls BPF_PROG_RUN_ARRAY_CHECK() to run the program array. Currently, BPF_PROG_RUN_ARRAY_CHECK() also calls bpf_cgroup_storage_set() to set percpu cgroup local storage with NULL value. This is due to Commit 394e40a ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") which modified __BPF_PROG_RUN_ARRAY() to call bpf_cgroup_storage_set() and this macro is also used by BPF_PROG_RUN_ARRAY_CHECK(). kuprobe and tracepoint programs are not allowed to call bpf_get_local_storage() helper hence does not access percpu cgroup local storage. Let us change BPF_PROG_RUN_ARRAY_CHECK() not to modify percpu cgroup local storage. The issue is observed when I tried to debug [1] where percpu data is overwritten due to preempt_disable -> migration_disable change. This patch does not completely fix the above issue, which will be addressed separately, e.g., multiple cgroup prog runs may preempt each other. But it does fix any potential issue caused by tracing program overwriting percpu cgroup storage: - in a busy system, a tracing program is to run between bpf_cgroup_storage_set() and the cgroup prog run. - a kprobe program is triggered by a helper in cgroup prog before bpf_get_local_storage() is called. [1] https://lore.kernel.org/bpf/CAKH8qBuXCfUz=w8L+Fj74OaUpbosO29niYwTki7e3Ag044_aww@mail.gmail.com/T Fixes: 394e40a ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20210309185028.3763817-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d3d40f237480abf3268956daf18cdc56edd32834 ] This reverts commit cc00bcaa589914096edef7fb87ca5cee4a166b5c. This (and the preceding) patch basically re-implemented the RCU mechanisms of patch 7845447. That patch was replaced because of the performance problems that it created when replacing tables. Now, we have the same issue: the call to synchronize_rcu() makes replacing tables slower by as much as an order of magnitude. Prior to using RCU a script calling "iptables" approx. 200 times was taking 1.16s. With RCU this increased to 11.59s. Revert these patches and fix the issue in a different way. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 175e476b8cdf2a4de7432583b49c871345e4f8a1 ] When a new table value was assigned, it was followed by a write memory barrier. This ensured that all writes before this point would complete before any writes after this point. However, to determine whether the rules are unused, the sequence counter is read. To ensure that all writes have been done before these reads, a full memory barrier is needed, not just a write memory barrier. The same argument applies when incrementing the counter, before the rules are read. Changing to using smp_mb() instead of smp_wmb() fixes the kernel panic reported in cc00bcaa5899 (which is still present), while still maintaining the same speed of replacing tables. The smb_mb() barriers potentially slow the packet path, however testing has shown no measurable change in performance on a 4-core MIPS64 platform. Fixes: 7f5c6d4 ("netfilter: get rid of atomic ops in fast path") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit abe7034b9a8d57737e80cc16d60ed3666990bdbf ] This reverts commit 443d6e86f821a165fae3fc3fc13086d27ac140b1. This (and the following) patch basically re-implemented the RCU mechanisms of patch 7845447. That patch was replaced because of the performance problems that it created when replacing tables. Now, we have the same issue: the call to synchronize_rcu() makes replacing tables slower by as much as an order of magnitude. Revert these patches and fix the issue in a different way. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c1013ff7a5472db637c56bb6237f8343398c03a7 ] The upfront allocation of new_bus_id is done to avoid allocating memory under acpi_device_lock, but it doesn't really help, because (1) it leads to many unnecessary memory allocations for _ADR devices, (2) kstrdup_const() is run under that lock anyway and (3) it complicates the code. Rearrange acpi_device_add() to allocate memory for a new struct acpi_device_bus_id instance only when necessary, eliminate a redundant local variable from it and reduce the number of labels in there. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eb50aaf960e3bedfef79063411ffd670da94b84b ] The decrementation of acpi_device_bus_id->instance_no in acpi_device_del() is incorrect, because it may cause a duplicate instance number to be allocated next time a device with the same acpi_device_bus_id is added. Replace above mentioned approach by using IDA framework. While at it, define the instance range to be [0, 4096). Fixes: e49bd2d ("ACPI: use PNPID:instance_no as bus_id of ACPI device") Fixes: ca9dc8d ("ACPI / scan: Fix acpi_bus_id_list bookkeeping") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 88cd3e6cfac915f50f7aa7b699bdf053afec866e ] The verification is to support cases where the root hash is not secured by Trusted Boot, UEFI Secureboot or similar technologies. One of the use cases for this is for dm-verity volumes mounted after boot, the root hash provided during the creation of the dm-verity volume has to be secure and thus in-kernel validation implemented here will be used before we trust the root hash and allow the block device to be created. The signature being provided for verification must verify the root hash and must be trusted by the builtin keyring for verification to succeed. The hash is added as a key of type "user" and the description is passed to the kernel so it can look it up and use it for verification. Adds CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG which can be turned on if root hash verification is needed. Kernel commandline dm_verity module parameter 'require_signatures' will indicate whether to force root hash signature verification (for all dm verity volumes). Signed-off-by: Jaskaran Khurana <jaskarankhurana@linux.microsoft.com> Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b410ed2a8572d41c68bd9208555610e4b07d0703 ] The only requirement of an auxtrace queue is that the buffers are in time order. That is achieved by making separate queues for separate perf buffer or AUX area buffer mmaps. That generally means a separate queue per cpu for per-cpu contexts, and a separate queue per thread for per-task contexts. When buffers are added to a queue, perf checks that the buffer cpu and thread id (tid) match the queue cpu and thread id. However, generally, that need not be true, and perf will queue buffers correctly anyway, so the check is not needed. In addition, the check gets erroneously hit when using sample mode to trace multiple threads. Consequently, fix that case by removing the check. Fixes: e502789 ("perf auxtrace: Add helpers for queuing AUX area tracing data") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210308151143.18338-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f69953837ca5d98aa983a138dc0b90a411e9c763 ] When kzalloc() returns NULL to qedi->global_queues[i], no error return code of qedi_alloc_global_queues() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com Fixes: ace7f46 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3401ecf7fc1b9458a19d42c0e26a228f18ac7dda ] When kzalloc() returns NULL, no error return code of mpt3sas_base_attach() is assigned. To fix this bug, r is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com Fixes: c696f7b ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 291da9d4a9eb3a1cb0610b7f4480f5b52b1825e7 upstream. If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to mutex_lock() which is clearly wrong because mutex_lock() lacks the io_schedule_prepare()/finish() invocations. Map it to mutex_lock_io(). Fixes: f21860b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/878s6fshii.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…e_enc() commit 8249d17d3194eac064a8ca5bc5ca0abc86feecde upstream. The pfn variable contains the page frame number as returned by the pXX_pfn() functions, shifted to the right by PAGE_SHIFT to remove the page bits. After page protection computations are done to it, it gets shifted back to the physical address using page_level_shift(). That is wrong, of course, because that function determines the shift length based on the level of the page in the page table but in all the cases, it was shifted by PAGE_SHIFT before. Therefore, shift it back using PAGE_SHIFT to get the correct physical address. [ bp: Rewrite commit message. ] Fixes: dfaaec9 ("x86: Add support for changing memory encryption attribute in early boot") Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/81abbae1657053eccc535c16151f63cd049dcb97.1616098294.git.isaku.yamahata@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream. When a non-initial netns is destroyed, the usual policy is to delete all virtual network interfaces contained, but move physical interfaces back to the initial netns. This keeps the physical interface visible on the system. CAN devices are somewhat special, as they define rtnl_link_ops even if they are physical devices. If a CAN interface is moved into a non-initial netns, destroying that netns lets the interface vanish instead of moving it back to the initial netns. default_device_exit() skips CAN interfaces due to having rtnl_link_ops set. Reproducer: ip netns add foo ip link set can0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60 CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1 Workqueue: netns cleanup_net [<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14) [<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8) [<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114) [<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac) [<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60) [<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380) [<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438) [<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8) [<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c) [<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c) To properly restore physical CAN devices to the initial netns on owning netns exit, introduce a flag on rtnl_link_ops that can be set by drivers. For CAN devices setting this flag, default_device_exit() considers them non-virtual, applying the usual namespace move. The issue was introduced in the commit mentioned below, as at that time CAN devices did not have a dellink() operation. Fixes: e008b5f ("net: Simplfy default_device_exit and improve batching.") Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e323d865b36134e8c5c82c834df89109a5c60dab upstream. iproute2 package is well behaved, but malicious user space can provide illegal shift values and trigger UBSAN reports. Add stab parameter to red_check_params() to validate user input. syzbot reported: UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18 shift exponent 111 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_calc_qavg_from_idle_time include/net/red.h:312 [inline] red_calc_qavg include/net/red.h:353 [inline] choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221 __dev_xmit_skb net/core/dev.c:3837 [inline] __dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:182 [inline] __ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161 ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192 NF_HOOK_COND include/linux/netfilter.h:290 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215 dst_output include/net/dst.h:448 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] NF_HOOK include/linux/netfilter.h:295 [inline] ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320 inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135 dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138 dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535 dccp_finish_passive_close net/dccp/proto.c:123 [inline] dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118 dccp_terminate_connection net/dccp/proto.c:958 [inline] dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478 __sock_release+0xcd/0x280 net/socket.c:599 sock_close+0x18/0x20 net/socket.c:1258 __fput+0x288/0x920 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] Fixes: 8afa10c ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 50535249f624d0072cd885bcdce4e4b6fb770160 upstream. struct sockaddr_qrtr has a 2-byte hole, and qrtr_recvmsg() currently does not clear it before copying kernel data to user space. It might be too late to name the hole since sockaddr_qrtr structure is uapi. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249 CPU: 0 PID: 29705 Comm: syz-executor.3 Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 kmsan_internal_check_memory+0x202/0x520 mm/kmsan/kmsan.c:402 kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0x1ac/0x270 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] move_addr_to_user+0x3a2/0x640 net/socket.c:237 ____sys_recvmsg+0x696/0xd50 net/socket.c:2575 ___sys_recvmsg net/socket.c:2610 [inline] do_recvmmsg+0xa97/0x22d0 net/socket.c:2710 __sys_recvmmsg net/socket.c:2789 [inline] __do_sys_recvmmsg net/socket.c:2812 [inline] __se_sys_recvmmsg+0x24a/0x410 net/socket.c:2805 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2805 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465f69 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f43659d6188 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 0000000000465f69 RDX: 0000000000000008 RSI: 0000000020003e40 RDI: 0000000000000003 RBP: 00000000004bfa8f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000010060 R11: 0000000000000246 R12: 000000000056bf60 R13: 0000000000a9fb1f R14: 00007f43659d6300 R15: 0000000000022000 Local variable ----addr@____sys_recvmsg created at: ____sys_recvmsg+0x168/0xd50 net/socket.c:2550 ____sys_recvmsg+0x168/0xd50 net/socket.c:2550 Bytes 2-3 of 12 are uninitialized Memory access of size 12 starts at ffff88817c627b40 Data copied to user address 0000000020000140 Fixes: bdabad3 ("net: Add Qualcomm IPC router") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Courtney Cavin <courtney.cavin@sonymobile.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 upstream. Clear beacon ie pointer and ie length after free in order to prevent double free. ================================================================== BUG: KASAN: double-free or invalid-free \ in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876 CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341 kasan_slab_free include/linux/kasan.h:192 [inline] __cache_free mm/slab.c:3424 [inline] kfree+0xed/0x270 mm/slab.c:3760 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline] __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172 cfg80211_leave net/wireless/core.c:1221 [inline] cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline] call_netdevice_notifiers net/core/dev.c:2066 [inline] __dev_close_many+0xee/0x2e0 net/core/dev.c:1586 __dev_close net/core/dev.c:1624 [inline] __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476 dev_change_flags+0x8a/0x160 net/core/dev.c:8549 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 163f0ec1df33cf468509ff38cbcbb5eb0d7fac60 upstream. Syzbot is reporting that ext4 can enter fs reclaim from kvmalloc() while the transaction is started like: fs_reclaim_acquire+0x117/0x150 mm/page_alloc.c:4340 might_alloc include/linux/sched/mm.h:193 [inline] slab_pre_alloc_hook mm/slab.h:493 [inline] slab_alloc_node mm/slub.c:2817 [inline] __kmalloc_node+0x5f/0x430 mm/slub.c:4015 kmalloc_node include/linux/slab.h:575 [inline] kvmalloc_node+0x61/0xf0 mm/util.c:587 kvmalloc include/linux/mm.h:781 [inline] ext4_xattr_inode_cache_find fs/ext4/xattr.c:1465 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1508 [inline] ext4_xattr_set_entry+0x1ce6/0x3780 fs/ext4/xattr.c:1649 ext4_xattr_ibody_set+0x78/0x2b0 fs/ext4/xattr.c:2224 ext4_xattr_set_handle+0x8f4/0x13e0 fs/ext4/xattr.c:2380 ext4_xattr_set+0x13a/0x340 fs/ext4/xattr.c:2493 This should be impossible since transaction start sets PF_MEMALLOC_NOFS. Add some assertions to the code to catch if something isn't working as expected early. Link: https://lore.kernel.org/linux-ext4/000000000000563a0205bafb7970@google.com/ Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210222171626.21884-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5d7047ed6b7214fbabc16d8712a822e256b1aa44 upstream. In commit 6417f03132a6 ("module: remove never implemented MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was removed from the kerne entirely. Shortly before this patch was applied mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") was added to net/master. As this would result in a merge conflict, let's revert this patch. Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de Suggested-by: Leon Romanovsky <leon@kernel.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a846738f8c3788d846ed1f587270d2f2e3d32432 upstream. The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries. Ones successfully obtained should not be overwritten, but instead left for xen_blkbk_unmap_prepare() to pick up and put. This is XSA-371. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20210329075610.300795746@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c5c97cadd7ed13381cb6b4bef5c841a66938d350 ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a56f44138a2c57047f1ea94ea121af31c595132b upstream. In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some circumstances, this may be done while the device is runtime suspended, triggering the below splat. Fix the problem by adding a pm_runtime_get_sync(), before reading the register, which will turn on clocks etc making the device accessible again. [ 1811.323148] mmc1: card aaaa removed [ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core] [ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5 [ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT) [ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.391090] lr : platform_drv_remove+0x2c/0x50 [ 1811.395536] sp : ffff800012c7bcb0 [ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900 [ 1811.404181] x27: 0000000000000000 x26: 0000000000000000 [ 1811.409497] x25: 0000000000000000 x24: 0000000000000000 [ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120 [ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810 [ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020 [ 1811.430773] x17: 0000000000000000 x16: 0000000000000000 [ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10 [ 1811.441406] x13: 0000000000000000 x12: 0000000000000020 [ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f [ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080 [ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000 [ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000 [ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030 [ 1811.478624] Call trace: [ 1811.481081] sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.487098] platform_drv_remove+0x2c/0x50 [ 1811.491198] __device_release_driver+0x188/0x230 [ 1811.495818] driver_detach+0xc0/0x14c [ 1811.499487] bus_remove_driver+0x5c/0xb0 [ 1811.503413] driver_unregister+0x30/0x60 [ 1811.507341] platform_driver_unregister+0x14/0x20 [ 1811.512048] sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx] [ 1811.518495] __arm64_sys_delete_module+0x19c/0x230 [ 1811.523291] el0_svc_common.constprop.0+0x78/0x1a0 [ 1811.528086] do_el0_svc+0x24/0x90 [ 1811.531405] el0_svc+0x14/0x20 [ 1811.534461] el0_sync_handler+0x1a4/0x1b0 [ 1811.538474] el0_sync+0x174/0x180 [ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000) [ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]--- Signed-off-by: Frank Li <Frank.Li@nxp.com> Cc: stable@vger.kernel.org # v4.0+ Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee576c47db60432c37e54b1e2b43a8ca6d3a8dca upstream. The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9 ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ] kernel panic trace looks like: #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7 hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); Fixed by checking NULL for mgr. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 90bd070aae6c4fb5d302f9c4b9c88be60c8197ec upstream. The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 #6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 #7 sys_ftruncate at ffffffff81280d8e #8 do_syscall_64 at ffffffff81003949 #9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] #6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] #7 dio_complete+140 at ffffffff812c873c #8 dio_aio_complete_work+25 at ffffffff812c89f9 #9 process_one_work+361 at ffffffff810b1889 #10 worker_thread+77 at ffffffff810b233d #11 kthread+261 at ffffffff810b7fd5 #12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ] Geethika reported a trace when doing a dlpar CPU add. ------------[ cut here ]------------ WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057 CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5 Workqueue: events cpuset_hotplug_workfn NIP: c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420 REGS: c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28828422 XER: 00000020 CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10 c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04: c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018 #012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000 c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80 0000000000000497 0000000000000004 #012GPR16: c00000000347a258 0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20: c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3 #012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030 c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280 c0000034aefe0b00 c0000000010a2a68 NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500 LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 Call Trace: [c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable) [c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530 [c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0 [c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70 [c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20 [c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670 [c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520 [c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0 [c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78 3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0 ---[ end trace 532d9066d3d4d7ec ]--- Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated correctly before its used in setting the masks. Setting the numa_node will ensure that when cpu_cpu_mask() gets called, the correct node number is used. This code movement helped fix the above call trace. Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

Aswath-Govindraju and others added 30 commits March 19, 2021 17:09

ayalevin and others added 22 commits March 30, 2021 21:49

Jimbo77 merged commit 04209ab into testing-2.5.0 Apr 3, 2021

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge Upstream to latest testing branch #5

Merge Upstream to latest testing branch #5

Jimbo77 commented Apr 3, 2021

Merge Upstream to latest testing branch #5

Merge Upstream to latest testing branch #5

Conversation

Jimbo77 commented Apr 3, 2021