Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Update the CI20 defconfig #41

Merged
merged 3 commits into from
Jul 7, 2015
Merged

Update the CI20 defconfig #41

merged 3 commits into from
Jul 7, 2015

Conversation

aejsmith
Copy link

First off, a lot of drivers for USB devices have been enabled, so hopefully the majority of devices users may wish to connect to the board should now be supported by default.

Secondly a lot of networking options have been enabled, such as netfilter/iptables.

Thirdly, all options recommended to be enabled for systemd have been enabled, so this kernel configuration works without issue with systemd-based distros such as Debian 8.

The majority of options enabled in this config have been enabled as modules, so there isn't too much increase in the core kernel image size (3.8 -> 4.7MB), but we do now produce 28MB of modules.

Also added the IR sensor to the DT and enable the driver for it the config. This required a small fix for a link error when using gpio_to_irq.

Alex Smith added 2 commits June 29, 2015 16:21
MIPS: JZ4780: Use generic GPIO definitions for JZ4780
83d85a1 
The JZ4740-specific GPIO functions are not compiled when MACH_JZ4780 is
selected. This leads to a link error if gpio_to_irq is used when
compiling for JZ4780. Therefore, wrap all of the JZ4740-specific GPIO
definitions in #ifdef, and when compiling for JZ4780, instead #define
everything (including gpio_to_irq) to use the generic gpiolib
implementations.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
MIPS: CI20: Add DT node for IR sensor
b5e02d6 
The infrared sensor on the CI20 board is connected to a GPIO and can
be driven using the gpio-ir-recv driver. Add a DT node for the sensor
to allow that driver to be used.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
@aejsmith aejsmith force-pushed the ci20-v3.18-config branch from 37196e5 to db0fff7 Compare June 30, 2015 10:54
@HarveyHunt
Copy link

I'm going to use this defconfig for testing the CI20, so I'll let you know if I come across any obvious issues.

@HarveyHunt HarveyHunt mentioned this pull request Jul 6, 2015
Merged
MIPS: CI20: Update defconfig
dcffa9f 
Update the CI20 defconfig with many new options enabled.

First off, a lot of drivers for USB devices have been enabled, so
hopefully the majority of devices users may wish to connect to the
board should now be supported by default.

Secondly a lot of networking options have been enabled, such as
netfilter/iptables.

Thirdly, all options recommended to be enabled for systemd have been
enabled, so this kernel configuration works without issue with
systemd-based distros such as Debian 8.

The majority of options enabled in this config have been enabled as
modules, so there isn't too much increase in the core kernel image
size (3.8 -> 4.7MB), but we do now produce 28MB of modules.

Signed-off-by: Alex Smith <alex.smith@imgtec.com>
@aejsmith aejsmith force-pushed the ci20-v3.18-config branch from db0fff7 to dcffa9f Compare July 6, 2015 13:11
ZubairLK added a commit that referenced this pull request Jul 7, 2015
@ZubairLK
Merge pull request #41 from aejsmith/ci20-v3.18-config
04cf0b4 
Update the CI20 defconfig to add peripherals that might be connected to the ci20.
Add IR DT node
fix in gpio definitions
@ZubairLK ZubairLK merged commit 04cf0b4 into MIPS:ci20-v3.18 Jul 7, 2015
chrisdearman pushed a commit that referenced this pull request Mar 22, 2017
@samitolvanen
UPSTREAM: ARM: uaccess: fix undefined instruction on ARMv7M/noMMU
c59ac1a 
The use of get_domain() in copy_thread() results in an oops on
ARMv7M/noMMU systems.  The thread cpu_domain value is only used when
CONFIG_CPU_USE_DOMAINS is enabled, so there's no need to save the
value in copy_thread() except when this is enabled, and this option
will never be enabled on these platforms.

Unhandled exception: IPSR = 00000006 LR = fffffff1
CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-next-20150909-00001-gb8ec5ad #41
Hardware name: NXP LPC18xx/43xx (Device Tree)
task: 2823fbe0 ti: 2823c000 task.ti: 2823c000
PC is at copy_thread+0x18/0x92
LR is at copy_thread+0x19/0x92
pc : [<2800a46e>]    lr : [<2800a46f>]    psr: 4100000b
sp : 2823df00  ip : 00000000  fp : 287c81c0
r10: 00000000  r9 : 00800300  r8 : 287c8000
r7 : 287c8000  r6 : 2818908d  r5 : 00000000  r4 : 287ca000
r3 : 00000000  r2 : 00000000  r1 : fffffff0  r0 : 287ca048
xPSR: 4100000b

Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Change-Id: I50753eae34431997b97529e8e68df87fe31bcfc6
(cherry picked from commit af4cb25)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request May 16, 2018
@davem330
nsh: fix infinite loop
af50e4b 
syzbot caught an infinite recursion in nsh_gso_segment().

Problem here is that we need to make sure the NSH header is of
reasonable length.

BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48  max: 48!
48 locks held by syz-executor0/10189:
 #0:         (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
 #1:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #1:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #2:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #2:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #3:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #3:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #4:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #4:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #5:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #5:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #6:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #6:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #7:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #7:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #8:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #8:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #9:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #9:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #10:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #10:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #11:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #11:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #12:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #12:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #13:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #13:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #14:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #14:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 #15:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 #15:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#16:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#16:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#17:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#17:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#18:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#18:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#19:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#19:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#20:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#20:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#21:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#21:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#22:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#22:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#23:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#23:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#24:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#24:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#25:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#25:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#26:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#26:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#27:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#27:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#28:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#28:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#29:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#29:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#30:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#30:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#31:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#31:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
 MIPS#32:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#32:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#33:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#33:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#34:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#34:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#35:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#35:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#36:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#36:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#37:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#37:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#38:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#38:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#39:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#39:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#40:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#40:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#41:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#41:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#42:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#42:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#43:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#43:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#44:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#44:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#45:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#45:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#46:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#46:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
 MIPS#47:         (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
 MIPS#47:         (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ MIPS#26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
 rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
 rcu_read_lock include/linux/rcupdate.h:632 [inline]
 skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
 skb_gso_segment include/linux/netdevice.h:4025 [inline]
 validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
 qdisc_restart net/sched/sch_generic.c:399 [inline]
 __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
 __dev_xmit_skb net/core/dev.c:3243 [inline]
 __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
 packet_snd net/packet/af_packet.c:2951 [inline]
 packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: c411ed8 ("nsh: add GSO support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Benc <jbenc@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request Jan 7, 2020
@grygoriyS @davem330
net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DM…
8a2b222 
…A memory with different size"

The TI CPSW(s) driver produces warning with DMA API debug options enabled:

WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968
DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size
 [device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes]
CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty MIPS#41
Hardware name: Generic DRA72X (Flattened Device Tree)
[<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14)
[<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110)
[<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c)
[<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c)
[<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968)
[<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90)
[<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c)
[<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c)
[<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c)
[<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94)
[<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4)
[<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598)
[<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74)
[<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c)
[<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c)
[<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364)
[<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8)
[<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74)
[<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24)
[<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100)
[<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14)
Exception stack(0xea9a7fa8 to 0xea9a7ff0)
...

The reason is that cpdma_chan_submit_si() now stores original buffer length
(sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len)
used to map the buffer.

Hence, fix an issue by passing correct buffer length in CPDMA descriptor.

Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes: 6670aca ("net: ethernet: ti: davinci_cpdma: add dma mapped submit")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request Jul 25, 2020
@jgunthorpe
RDMA/mlx5: Set PD pointers for the error flow unwind
0a03715 
ib_pd is accessed internally during destroy of the TIR/TIS, but PD
can be not set yet. This leading to the following kernel panic.

  BUG: kernel NULL pointer dereference, address: 0000000000000074
  PGD 8000000079eaa067 P4D 8000000079eaa067 PUD 7ae81067 PMD 0 Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 709 Comm: syz-executor.0 Not tainted 5.8.0-rc3 MIPS#41 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:destroy_raw_packet_qp_tis drivers/infiniband/hw/mlx5/qp.c:1189 [inline]
  RIP: 0010:destroy_raw_packet_qp drivers/infiniband/hw/mlx5/qp.c:1527 [inline]
  RIP: 0010:destroy_qp_common+0x2ca/0x4f0 drivers/infiniband/hw/mlx5/qp.c:2397
  Code: 00 85 c0 74 2e e8 56 18 55 ff 48 8d b3 28 01 00 00 48 89 ef e8 d7 d3 ff ff 48 8b 43 08 8b b3 c0 01 00 00 48 8b bd a8 0a 00 00 <0f> b7 50 74 e8 0d 6a fe ff e8 28 18 55 ff 49 8d 55 50 4c 89 f1 48
  RSP: 0018:ffffc900007bbac8 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: ffff88807949e800 RCX: 0000000000000998
  RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88807c180140
  RBP: ffff88807b50c000 R08: 000000000002d379 R09: ffffc900007bba00
  R10: 0000000000000001 R11: 000000000002d358 R12: ffff888076f37000
  R13: ffff88807949e9c8 R14: ffffc900007bbe08 R15: ffff888076f37000
  FS:  00000000019bf940(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000074 CR3: 0000000076d68004 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   mlx5_ib_create_qp+0xf36/0xf90 drivers/infiniband/hw/mlx5/qp.c:3014
   _ib_create_qp drivers/infiniband/core/core_priv.h:333 [inline]
   create_qp+0x57f/0xd20 drivers/infiniband/core/uverbs_cmd.c:1443
   ib_uverbs_create_qp+0xcf/0x100 drivers/infiniband/core/uverbs_cmd.c:1564
   ib_uverbs_write+0x5fa/0x780 drivers/infiniband/core/uverbs_main.c:664
   __vfs_write+0x3f/0x90 fs/read_write.c:495
   vfs_write+0xc7/0x1f0 fs/read_write.c:559
   ksys_write+0x5e/0x110 fs/read_write.c:612
   do_syscall_64+0x3e/0x70 arch/x86/entry/common.c:359
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x466479
  Code: Bad RIP value.
  RSP: 002b:00007ffd057b62b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479
  RDX: 0000000000000070 RSI: 0000000020000240 RDI: 0000000000000003
  RBP: 00000000019bf8fc R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
  R13: 0000000000000bf6 R14: 00000000004cb859 R15: 00000000006fefc0

Fixes: 6c41965 ("RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path")
Link: https://lore.kernel.org/r/20200707110612.882962-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request Jun 11, 2021
@bostroesser @martinkpetersen
scsi: target: tcmu: Fix xarray RCU warning
b4150b6 
Commit f5ce815 ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N *
PAGE_SIZE") introduced xas_next() calls to iterate xarray elements.  These
calls triggered the WARNING "suspicious RCU usage" at tcmu device set up
[1]. In the call stack of xas_next(), xas_load() was called.  According to
its comment, this function requires "the xa_lock or the RCU lock".

To avoid the warning:

 - Guard the small loop calling xas_next() in tcmu_get_empty_block with RCU
   lock.

 - In the large loop in tcmu_copy_data using RCU lock would possibly
   disable preemtion for a long time (copy multi MBs). Therefore replace
   XA_STATE, xas_set and xas_next with a single xa_load.

[1]

[ 1899.867091] =============================
[ 1899.871199] WARNING: suspicious RCU usage
[ 1899.875310] 5.13.0-rc1+ MIPS#41 Not tainted
[ 1899.879222] -----------------------------
[ 1899.883299] include/linux/xarray.h:1182 suspicious rcu_dereference_check() usage!
[ 1899.890940] other info that might help us debug this:
[ 1899.899082] rcu_scheduler_active = 2, debug_locks = 1
[ 1899.905719] 3 locks held by kworker/0:1/1368:
[ 1899.910161]  #0: ffffa1f8c8b98738 ((wq_completion)target_submission){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580
[ 1899.920732]  #1: ffffbd7040cd7e78 ((work_completion)(&q->sq.work)){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580
[ 1899.931146]  #2: ffffa1f8d1c99768 (&udev->cmdr_lock){+.+.}-{3:3}, at: tcmu_queue_cmd+0xea/0x160 [target_core_user]
[ 1899.941678] stack backtrace:
[ 1899.946093] CPU: 0 PID: 1368 Comm: kworker/0:1 Not tainted 5.13.0-rc1+ MIPS#41
[ 1899.953070] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018
[ 1899.962459] Workqueue: target_submission target_queued_submit_work [target_core_mod]
[ 1899.970337] Call Trace:
[ 1899.972839]  dump_stack+0x6d/0x89
[ 1899.976222]  xas_descend+0x10e/0x120
[ 1899.979875]  xas_load+0x39/0x50
[ 1899.983077]  tcmu_get_empty_blocks+0x115/0x1c0 [target_core_user]
[ 1899.989318]  queue_cmd_ring+0x1da/0x630 [target_core_user]
[ 1899.994897]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1899.999695]  ? trace_kmalloc+0xa6/0xd0
[ 1900.003501]  ? __kmalloc+0x205/0x380
[ 1900.007167]  tcmu_queue_cmd+0x12f/0x160 [target_core_user]
[ 1900.012746]  __target_execute_cmd+0x23/0xa0 [target_core_mod]
[ 1900.018589]  transport_generic_new_cmd+0x1f3/0x370 [target_core_mod]
[ 1900.025046]  transport_handle_cdb_direct+0x34/0x50 [target_core_mod]
[ 1900.031517]  target_queued_submit_work+0x43/0xe0 [target_core_mod]
[ 1900.037837]  process_one_work+0x268/0x580
[ 1900.041952]  ? process_one_work+0x580/0x580
[ 1900.046195]  worker_thread+0x55/0x3b0
[ 1900.049921]  ? process_one_work+0x580/0x580
[ 1900.054192]  kthread+0x143/0x160
[ 1900.057499]  ? kthread_create_worker_on_cpu+0x40/0x40
[ 1900.062661]  ret_from_fork+0x1f/0x30

Link: https://lore.kernel.org/r/20210519135440.26773-1-bostroesser@gmail.com
Fixes: f5ce815 ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request Nov 29, 2023
@davem330
r8169: fix the KCSAN reported data-race in rtl_tx() while reading tp-…
c1c0ce3 
…>cur_tx

KCSAN reported the following data-race:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll [r8169] / rtl8169_start_xmit [r8169]

write (marked) to 0xffff888102474b74 of 4 bytes by task 5358 on cpu 29:
rtl8169_start_xmit (drivers/net/ethernet/realtek/r8169_main.c:4254) r8169
dev_hard_start_xmit (./include/linux/netdevice.h:4889 ./include/linux/netdevice.h:4903 net/core/dev.c:3544 net/core/dev.c:3560)
sch_direct_xmit (net/sched/sch_generic.c:342)
__dev_queue_xmit (net/core/dev.c:3817 net/core/dev.c:4306)
ip_finish_output2 (./include/linux/netdevice.h:3082 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv4/ip_output.c:233)
__ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:293)
ip_finish_output (net/ipv4/ip_output.c:328)
ip_output (net/ipv4/ip_output.c:435)
ip_send_skb (./include/net/dst.h:458 net/ipv4/ip_output.c:127 net/ipv4/ip_output.c:1486)
udp_send_skb (net/ipv4/udp.c:963)
udp_sendmsg (net/ipv4/udp.c:1246)
inet_sendmsg (net/ipv4/af_inet.c:840 (discriminator 4))
sock_sendmsg (net/socket.c:730 net/socket.c:753)
__sys_sendto (net/socket.c:2177)
__x64_sys_sendto (net/socket.c:2185)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

read to 0xffff888102474b74 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4397 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14))
asm_common_interrupt (./arch/x86/include/asm/idtentry.h:636)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0x002f4815 -> 0x002f4816

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 MIPS#41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

The write side of drivers/net/ethernet/realtek/r8169_main.c is:
==================
   4251         /* rtl_tx needs to see descriptor changes before updated tp->cur_tx */
   4252         smp_wmb();
   4253
 → 4254         WRITE_ONCE(tp->cur_tx, tp->cur_tx + frags + 1);
   4255
   4256         stop_queue = !netif_subqueue_maybe_stop(dev, 0, rtl_tx_slots_avail(tp),
   4257                                                 R8169_TX_STOP_THRS,
   4258                                                 R8169_TX_START_THRS);

The read side is the function rtl_tx():

   4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
   4356                    int budget)
   4357 {
   4358         unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
   4359         struct sk_buff *skb;
   4360
   4361         dirty_tx = tp->dirty_tx;
   4362
   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {
   4364                 unsigned int entry = dirty_tx % NUM_TX_DESC;
   4365                 u32 status;
   4366
   4367                 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
   4368                 if (status & DescOwn)
   4369                         break;
   4370
   4371                 skb = tp->tx_skb[entry].skb;
   4372                 rtl8169_unmap_tx_skb(tp, entry);
   4373
   4374                 if (skb) {
   4375                         pkts_compl++;
   4376                         bytes_compl += skb->len;
   4377                         napi_consume_skb(skb, budget);
   4378                 }
   4379                 dirty_tx++;
   4380         }
   4381
   4382         if (tp->dirty_tx != dirty_tx) {
   4383                 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
   4384                 WRITE_ONCE(tp->dirty_tx, dirty_tx);
   4385
   4386                 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
   4387                                               rtl_tx_slots_avail(tp),
   4388                                               R8169_TX_START_THRS);
   4389                 /*
   4390                  * 8168 hack: TxPoll requests are lost when the Tx packets are
   4391                  * too close. Let's kick an extra TxPoll request when a burst
   4392                  * of start_xmit activity is detected (if it is not detected,
   4393                  * it is slow enough). -- FR
   4394                  * If skb is NULL then we come here again once a tx irq is
   4395                  * triggered after the last fragment is marked transmitted.
   4396                  */
 → 4397                 if (tp->cur_tx != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);
   4399         }
   4400 }

Obviously from the code, an earlier detected data-race for tp->cur_tx was fixed in the
line 4363:

   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {

but the same solution is required for protecting the other access to tp->cur_tx:

 → 4397                 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);

The write in the line 4254 is protected with WRITE_ONCE(), but the read in the line 4397
might have suffered read tearing under some compiler optimisations.

The fix eliminated the KCSAN data-race report for this bug.

It is yet to be evaluated what happens if tp->cur_tx changes between the test in line 4363
and line 4397. This test should certainly not be cached by the compiler in some register
for such a long time, while asynchronous writes to tp->cur_tx might have occurred in line
4254 in the meantime.

Fixes: 94d8a98 ("r8169: reduce number of workaround doorbell rings")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request Nov 29, 2023
@davem330
r8169: fix the KCSAN reported data-race in rtl_tx while reading TxDes…
dcf75a0 
…cArray[entry].opts1

KCSAN reported the following data-race:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169

race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0xb0000042 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 MIPS#41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

The read side is in

drivers/net/ethernet/realtek/r8169_main.c
=========================================
   4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp,
   4356                    int budget)
   4357 {
   4358         unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0;
   4359         struct sk_buff *skb;
   4360
   4361         dirty_tx = tp->dirty_tx;
   4362
   4363         while (READ_ONCE(tp->cur_tx) != dirty_tx) {
   4364                 unsigned int entry = dirty_tx % NUM_TX_DESC;
   4365                 u32 status;
   4366
 → 4367                 status = le32_to_cpu(tp->TxDescArray[entry].opts1);
   4368                 if (status & DescOwn)
   4369                         break;
   4370
   4371                 skb = tp->tx_skb[entry].skb;
   4372                 rtl8169_unmap_tx_skb(tp, entry);
   4373
   4374                 if (skb) {
   4375                         pkts_compl++;
   4376                         bytes_compl += skb->len;
   4377                         napi_consume_skb(skb, budget);
   4378                 }
   4379                 dirty_tx++;
   4380         }
   4381
   4382         if (tp->dirty_tx != dirty_tx) {
   4383                 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl);
   4384                 WRITE_ONCE(tp->dirty_tx, dirty_tx);
   4385
   4386                 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl,
   4387                                               rtl_tx_slots_avail(tp),
   4388                                               R8169_TX_START_THRS);
   4389                 /*
   4390                  * 8168 hack: TxPoll requests are lost when the Tx packets are
   4391                  * too close. Let's kick an extra TxPoll request when a burst
   4392                  * of start_xmit activity is detected (if it is not detected,
   4393                  * it is slow enough). -- FR
   4394                  * If skb is NULL then we come here again once a tx irq is
   4395                  * triggered after the last fragment is marked transmitted.
   4396                  */
   4397                 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb)
   4398                         rtl8169_doorbell(tp);
   4399         }
   4400 }

tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes
this KCSAN warning.

   4366
 → 4367                 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1));
   4368                 if (status & DescOwn)
   4369                         break;
   4370

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Fixes: 1da177e ("Linux-2.6.12-rc2")
Signed-off-by: David S. Miller <davem@davemloft.net>
pcercuei pushed a commit to OpenDingux/linux that referenced this pull request Nov 29, 2023
@davem330
r8169: fix the KCSAN reported data race in rtl_rx while reading desc-…
f97eee4 
…>opts1

KCSAN reported the following data-race bug:

==================================================================
BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169

race at unknown origin, with read to 0xffff888117e43510 of 4 bytes by interrupt on cpu 21:
rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4430 drivers/net/ethernet/realtek/r8169_main.c:4583) r8169
__napi_poll (net/core/dev.c:6527)
net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727)
__do_softirq (kernel/softirq.c:553)
__irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632)
irq_exit_rcu (kernel/softirq.c:647)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14))
asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645)
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291)
cpuidle_enter (drivers/cpuidle/cpuidle.c:390)
call_cpuidle (kernel/sched/idle.c:135)
do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282)
cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1))
start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0x80003fff -> 0x3402805f

Reported by Kernel Concurrency Sanitizer on:
CPU: 21 PID: 0 Comm: swapper/21 Tainted: G             L     6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 MIPS#41
Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023
==================================================================

drivers/net/ethernet/realtek/r8169_main.c:
==========================================
   4429
 → 4430                 status = le32_to_cpu(desc->opts1);
   4431                 if (status & DescOwn)
   4432                         break;
   4433
   4434                 /* This barrier is needed to keep us from reading
   4435                  * any other fields out of the Rx descriptor until
   4436                  * we know the status of DescOwn
   4437                  */
   4438                 dma_rmb();
   4439
   4440                 if (unlikely(status & RxRES)) {
   4441                         if (net_ratelimit())
   4442                                 netdev_warn(dev, "Rx ERROR. status = %08x\n",

Marco Elver explained that dma_rmb() doesn't prevent the compiler to tear up the access to
desc->opts1 which can be written to concurrently. READ_ONCE() should prevent that from
happening:

   4429
 → 4430                 status = le32_to_cpu(READ_ONCE(desc->opts1));
   4431                 if (status & DescOwn)
   4432                         break;
   4433

As the consequence of this fix, this KCSAN warning was eliminated.

Fixes: 6202806 ("r8169: drop member opts1_mask from struct rtl8169_private")
Suggested-by: Marco Elver <elver@google.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.hr/
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
3 participants
@aejsmith @HarveyHunt @ZubairLK