✨ LARGE_MOVE_ITEMS

MarlinFirmware/Marlin#25026

config/default/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -1363,6 +1363,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Alfawise/U20/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/A2/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/A2plus/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/A6/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/A8/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/A8plus/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/A9/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/E10/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/E16/Stock/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET4+/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET4-Pro/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET4/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET4X/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET5-Pro/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET5/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Anet/ET5X/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/Chiron/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/ArmEd/Configuration_adv.h

@@ -1359,6 +1359,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Artillery/Genius Pro/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Artillery/Genius/BLTouch/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Artillery/Genius/V1/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen

config/examples/Artillery/Hornet/Configuration_adv.h

@@ -1354,6 +1354,7 @@
 #if HAS_MANUAL_MOVE_MENU
   #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel
   #define FINE_MANUAL_MOVE 0.025    // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines
+  //#define LARGE_MOVE_ITEMS        // Add 50/100mm moves to MarlinUI even with a smaller bed
   #if IS_ULTIPANEL
     #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
     #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen