test for ramps default Z_MIN_PROBE_PIN on stm32 #25524

ellensp · 2023-03-16T03:54:42Z

Description

Users are just enabling,#define Z_MIN_PROBE_PIN 32 without updating the pin
Most commonly stm32 based controllers (creality v4xx boards)
Add a check for setting Z_MIN_PROBE_PIN to 32 on a stm32

Benefits

Less confused users

ellensp · 2023-03-16T03:55:09Z

This first run is just to check for any false positives in the tests

thinkyhead · 2023-03-16T05:14:40Z

The error will give a false-positive if the pin is set to PC0.

ellensp · 2023-03-16T05:19:31Z

Well ill take your word for it that all stm32 PC0 is 32
No board currently set this pin to PC0

If this should change we can update this with a override at that ti

thisiskeithb · 2023-03-16T05:21:39Z

You could also leave Z_MIN_PROBE_PIN disabled & set it to -1 in the config with a clearer description to set it to a valid pin for the board.

thinkyhead · 2023-03-16T05:24:33Z

…or… maybe not PC0, but maybe some other pin. Seems hard to predict. The way pins are defined for STM32 is funky.

ellensp · 2023-03-16T05:33:32Z

either way... just something to stop users doing this..

I've seen this issue crop up at least 5 times recently.. (all creality users adding cr touch's to their machines) And that is just on discord. so its probably happening a lot more.

The most recent example

Discord User: "so I uncommented Z_MIN_PROBE_PIN 32"

I advised them to comment out this line (as it is not required as it is in the boards pin.h file. )

Discord User: "Yup Thanks, it was the pin 32
you solved my problem that took weeks off my life and googleing couldnt solve"

ellensp · 2023-03-16T05:34:42Z

This would need to be updated in all example Configuration files too. Where its not enabled, set it to -1

MarlinFirmware/Marlin#25524 Co-Authored-By: ellensp <530024+ellensp@users.noreply.github.com>

* [cron] Bump distribution date (2023-03-05) * 🐛 Fix apply_power for SPINDLE_SERVO (MarlinFirmware#25465) * 🐛 Fix Flash EEPROM for STM32G0B1CB (MarlinFirmware#25469) * 🌐 Update Turkish language (MarlinFirmware#25447) * [cron] Bump distribution date (2023-03-06) * 🧑‍💻 Script to make non-accented languages * 🌐 Update Turkish language Followup to MarlinFirmware#25447 * [cron] Bump distribution date (2023-03-07) * 🌐 DGUS Reloaded non-accented French (MarlinFirmware#25443) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🔧 Add DGUS_LCD_UI RELOADED conditions * [cron] Bump distribution date (2023-03-08) * ✨ Extra Z Servo Probe options (MarlinFirmware#21427) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🔧 Update some config.ini options * 🔨 VSCode + Devcontainer support (MarlinFirmware#22420) * [cron] Bump distribution date (2023-03-09) * ✨ Z_SAFE_HOMING_POINT_ABSOLUTE (MarlinFirmware#23069) * [cron] Bump distribution date (2023-03-10) * ✨ BTT Octopus Max EZ 1.0, SKR 3.0 / 3.0 EZ (MarlinFirmware#25387) BTT Octopus Max EZ V1.0 (STM32H723VE/ZE), SKR V3.0 / V3.0 EZ (STM32H723VG) * [cron] Bump distribution date (2023-03-11) * 🐛 Fix Anet ET4 SD_SS_PIN (MarlinFirmware#25492) * [cron] Bump distribution date (2023-03-12) * BTT Octopus … followup (MarlinFirmware#25495) Followup to MarlinFirmware#25387 * ⚡️ Exit from ISR on AVR already does sei Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * 🎨 Cosmetic stepper updates Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ✨ MAX7219_DEBUG_MULTISTEPPING Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ⚡️ Use hal_timer_t for timing vars Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ⚡️ Use cached la_active state Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ⚡️ Use AxisFlags for step_needed Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * [cron] Bump distribution date (2023-03-13) * ⚡️ Major shaper optimization Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ⚡️ Set steps_per_isr in calc_multistep_timer_interval Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * 🔧 Expose MULTISTEPPING_LIMIT option Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ⚡️ Optimize speed lookup for AVR Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * ⚡️ Update ISR cycle counts Co-Authored-By: tombrazier <68918209+tombrazier@users.noreply.github.com> * 📺 DGUS_RELOADED 1.03 (MarlinFirmware#25490) * [cron] Bump distribution date (2023-03-14) * 🐛 Fix Polargraph without Z (MarlinFirmware#25514) * 🐛 Fix long filename read/report (MarlinFirmware#25509) * 🩹 Fix IA_CREALITY float, startup (MarlinFirmware#25493) Followup to MarlinFirmware#25440 * [cron] Bump distribution date (2023-03-15) * 🎨 Misc. formatting * 🎨 Misc. tramming menu cleanup (MarlinFirmware#25519) * 🩹 Fan Menu / Status fixes Followup to MarlinFirmware#21888 * 🩹 Fix DWIN MarlinUI Fan/E/XY (MarlinFirmware#25502) * [cron] Bump distribution date (2023-03-16) * 🔧 Safer default for Z_MIN_PROBE_PIN override (MarlinFirmware#25524) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * ♻️ Refactor PROBE_PT_[123] * ♻️ Refactor UBL 'G29 J' * [cron] Bump distribution date (2023-03-17) * 🚸 Refinements for UBL G29 J (tilt mesh) (MarlinFirmware#25486) * [cron] Bump distribution date (2023-03-18) * 🔧 Optional MPC_AUTOTUNE to save 5.5 - 5.8KB * ✨ Sovol v1.3.1 (Sovol SV06) (MarlinFirmware#25267) * 🧑‍💻 More IntelliSense-friendly declares * 🎨 Clean up IA_CREALITY includes (MarlinFirmware#25530) * 🎨 Suppress warning (MarlinFirmware#25529) * 🔧 SQUARE_WAVE_STEPPING => EDGE_STEPPING (MarlinFirmware#25526) Co-Authored-By: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🚸 Improve Z-Probe raise for deploy (MarlinFirmware#25498) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🐛 Fix LVGL / MKS WiFi long filename (MarlinFirmware#25483) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🔨 Fix STM32H723Vx_btt for case-sensitive (MarlinFirmware#25535) * 🐛 Fix FYSETC Cheetah v2.0 Servo/Probe pins (MarlinFirmware#24635) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🐛 Prevent MPC E-permm overrun in Load Filament (MarlinFirmware#25531) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🚸 Fix / improve LCD_BED_TRAMMING (MarlinFirmware#25425) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🔧 Sanity-check PRINTCOUNTER_SAVE_INTERVAL + ESP32 I2S Exp (MarlinFirmware#25527) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * ⚡️ Smart Adaptive Multi-Stepping (MarlinFirmware#25474) * 🚸 Temperature Variance Monitor tweaks (MarlinFirmware#23571) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🩹 Fix Ender 2 stock LCD (MarlinFirmware#25538) * ⚡️ Misc. optimizations * [cron] Bump distribution date (2023-03-19) * ✨ REPORT_ADAPTIVE_FAN_SLOWING (MarlinFirmware#25537) * 🩹 Fix a serial_ternary * ✨ Z_SERVO_DEACTIVATE_AFTER_STOW (MarlinFirmware#24215) * 🐛 Avoid step rate overflow (MarlinFirmware#25541) * [cron] Bump distribution date (2023-03-20) * ✨ PROBING_TOOL (MarlinFirmware#24411) * [cron] Bump distribution date (2023-03-22) * ✨ FILAMENT_SWITCH_AND_MOTION (MarlinFirmware#25548) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🧑‍💻 ExtUI::onSetPowerLoss * [cron] Bump distribution date (2023-03-23) * 🎨 calibration_stage => stage * [cron] Bump distribution date (2023-03-24) * 🩹 Reset touch screen calibration on failure (MarlinFirmware#25334) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> * 🎨 TMC SPI Pins Co-Authored-By: Martin Turski <turningtides@outlook.de> * 🎨 Pins header comments Co-Authored-By: Martin Turski <turningtides@outlook.de> * 🎨 Wrap font includes Co-Authored-By: Martin Turski <turningtides@outlook.de> * 🎨 LPC_SOFTWARE_SPI => SOFTWARE_SPI Co-Authored-By: Martin Turski <turningtides@outlook.de> * 🔨 INI Updates Co-Authored-By: Martin Turski <turningtides@outlook.de> * 🎨 Misc. fixes, cleanup Co-Authored-By: Martin Turski <turningtides@outlook.de> * 🩹 Update TRONXY_V10 SPI_FLASH pins * [cron] Bump distribution date (2023-03-25) * 🩹 Fix Chitu3D V6 default probe pin (MarlinFirmware#25552) * 🔧 Remove TVPM warning (MarlinFirmware#25551) * 🐛 Fix MKS Gen L 2.1 MOSFET pins (MarlinFirmware#25542) * 🩹 Refine MKS boards with a dedicated FAN port (MarlinFirmware#25567) * 🎨 Rename FAN_PIN to FAN0_PIN (MarlinFirmware#25568) * 📝 Fix spelling (MarlinFirmware#25563) * [cron] Bump distribution date (2023-03-26) * 🎨 Timer tweaks * 🔧 Refactor endstop state config (MarlinFirmware#25574) * ✨ AnyCubic Vyper / Vyper LCD (MarlinFirmware#25405) * 🩹 Fix Touch Calibration first point (MarlinFirmware#25298) * 🧑‍💻 Auto Fan / Cooler Fan updates (MarlinFirmware#25554) * 🐛 Prevent divide-by-zero in calc_timer_interval (MarlinFirmware#25557) * 🔧 Sanity-check for endstop inverting Followup to MarlinFirmware#25574 * 🔧 Clarify axis disable / timeout (MarlinFirmware#25571) * [cron] Bump distribution date (2023-03-27) * 🔨 Fix thread-unsafe deque iteration * 🐛 Fix AnyCubic Vyper ProcessPanelRequest Followup to MarlinFirmware#25405 * 🎨 Suppress a type warning (MarlinFirmware#25575) * ⚡️ Improve TFT DMA for STM32 (MarlinFirmware#25359) * 🐛 Fix M23 long filename support (MarlinFirmware#25540) * [cron] Bump distribution date (2023-03-28) * 🎨 Misc. cleanup * 🔧 Fix up WiFi options (MarlinFirmware#25586) * 🔨 Update config.ini endstop states Followup to MarlinFirmware#25574 * [cron] Bump distribution date (2023-03-29) * 🔧 Impose Hephestos 2 Bed Kit requirements (MarlinFirmware#25585) * 🎨 Remove unused ProUI : UBLValidMesh (MarlinFirmware#25591) * 🔨 Improve Docker local tests support (MarlinFirmware#25583) * 🔨 MarlinSimUI updates (MarlinFirmware#25589) * [cron] Bump distribution date (2023-03-30) * 🩹 Update Trigorilla V006 fan pin Followup to MarlinFirmware#25568 * 🩹 Fix Ender-3 V2 with no fan * 🐛 Fix _HAS_FAN for fan on Pin 0 * 🎨 Refine probe, more debug * 🩹 Fix displayed mix percentages * [cron] Bump distribution date (2023-03-31) * 🔧 DGUS_LCD_UI selectable options * 🔧 Fix SENSORLESS hit state error (MarlinFirmware#25604) * 🧑‍💻 CardReader adjustments (MarlinFirmware#25611) * [cron] Bump distribution date (2023-04-01) * 🎨 HAS_SHAPING => HAS_ZV_SHAPING * ✨ Fixed-Time Motion with Input Shaping by Ulendo (MarlinFirmware#25394) Co-authored-by: Ulendo Alex <alex@ulendo.io> * 🐛 Fix Long FIlename lookup (MarlinFirmware#25598) * 🌐 Update Italian language (MarlinFirmware#25587) * 🔨 Move Docker local test script Followup to MarlinFirmware#25583 * 🩹 FT_MOTION Followup * 🐛 Ensure root for 'M503 C' * 🐛 Clean up DELTA babystep Z * 🐛 INVERT_*_DIR for FT_MOTION (MarlinFirmware#25637) * 🔧 Move DOGLCD options * 🧑‍💻 Update pinsformat.js * 📝 Update Ender # labels * [cron] Bump distribution date (2023-04-07) * 🚸 Support CoreXY without Z (MarlinFirmware#25630) * 🎨 Apply const (MarlinFirmware#25643) * update `pins_Aquila_X2.h` to new format --------- Co-authored-by: thinkyhead <thinkyhead@users.noreply.github.com> Co-authored-by: Hans-Christian Ebke <ebke@cs.rwth-aachen.de> Co-authored-by: alextrical <35117191+alextrical@users.noreply.github.com> Co-authored-by: Abdullah YILMAZ <h.abdullahyilmaz@hotmail.com> Co-authored-by: albatorsssx <albator_ssx@hotmail.com> Co-authored-by: Kurt Haenen <Misterke@users.noreply.github.com> Co-authored-by: Sion Williams <sion5@hotmail.co.uk> Co-authored-by: Evgeniy Zhabotinskiy <evg-zhabotinsky@users.noreply.github.com> Co-authored-by: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com> Co-authored-by: tombrazier <68918209+tombrazier@users.noreply.github.com> Co-authored-by: Neo2003 <Neo2003@users.noreply.github.com> Co-authored-by: jbubik <jbubik@centrum.cz> Co-authored-by: Eduard Sukharev <sukharev.eh@gmail.com> Co-authored-by: Davide Rombolà <davide.rombola@gmail.com> Co-authored-by: dwzg <50058606+dwzg@users.noreply.github.com> Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com> Co-authored-by: jamespearson04 <jamespearson04@hotmail.co.uk> Co-authored-by: Michael Hill <mhill@hillsoftware.com> Co-authored-by: James Gilliland <neclimdul@gmail.com> Co-authored-by: Liam Powell <liam+github@liampwll.com> Co-authored-by: George Fu <nailao_5918@163.com> Co-authored-by: Piotr Paczyński <ppaczyn@gmail.com> Co-authored-by: Farva42 <100859196+Farva42@users.noreply.github.com> Co-authored-by: John Robertson <john@cirtech.co.uk> Co-authored-by: John Lagonikas <39417467+zeleps@users.noreply.github.com> Co-authored-by: StevilKnevil <stevilknevil@hotmail.co.uk> Co-authored-by: FilippoR <filippo.rossoni@gmail.com> Co-authored-by: BIGTREETECH <38851044+bigtreetech@users.noreply.github.com> Co-authored-by: Martin Turski <turningtides@outlook.de> Co-authored-by: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Co-authored-by: Bob Kuhn <bob.kuhn@att.net> Co-authored-by: Alexander Gavrilenko <jmz52@users.noreply.github.com> Co-authored-by: Andrew <18502096+classicrocker883@users.noreply.github.com> Co-authored-by: John Unland <junland.foss@gmail.com> Co-authored-by: Chris Pepper <p3p@p3psoft.co.uk> Co-authored-by: Ulendo Alex <alex@ulendo.io>

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

test for ramps default Z_MIN_PROBE_PIN on stm32

2052c94

instruct

404c495

ellensp marked this pull request as ready for review March 16, 2023 05:19

good idea

ffb5a84

thinkyhead added PR: Improvement C: Configuration labels Mar 16, 2023

thinkyhead added a commit to MarlinFirmware/Configurations that referenced this pull request Mar 16, 2023

🔧 Avoid bad Z_MIN_PROBE_PIN

367c9b8

MarlinFirmware/Marlin#25524 Co-Authored-By: ellensp <530024+ellensp@users.noreply.github.com>

thinkyhead merged commit 41b3409 into MarlinFirmware:bugfix-2.1.x Mar 16, 2023

ellensp deleted the patch-2 branch March 16, 2023 05:46

EvilGremlin pushed a commit to EvilGremlin/Marlin that referenced this pull request Apr 8, 2023

🔧 Safer default for Z_MIN_PROBE_PIN override (MarlinFirmware#25524)

f11436a

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

thinkyhead added a commit that referenced this pull request Apr 10, 2023

🔧 Safer default for Z_MIN_PROBE_PIN override (#25524)

ca2abea

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

thinkyhead added a commit to thinkyhead/Marlin that referenced this pull request May 16, 2023

🔧 Safer default for Z_MIN_PROBE_PIN override (MarlinFirmware#25524)

6e89bc8

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

EvilGremlin pushed a commit to EvilGremlin/Marlin that referenced this pull request May 17, 2023

🔧 Safer default for Z_MIN_PROBE_PIN override (MarlinFirmware#25524)

63457d1

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

tspiva pushed a commit to tspiva/Marlin that referenced this pull request May 25, 2023

🔧 Safer default for Z_MIN_PROBE_PIN override (MarlinFirmware#25524)

802fce3

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Andy-Big pushed a commit to Andy-Big/Marlin_FB_Reborn that referenced this pull request Jul 9, 2023

🔧 Safer default for Z_MIN_PROBE_PIN override (MarlinFirmware#25524)

7ef2861

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

test for ramps default Z_MIN_PROBE_PIN on stm32 #25524

test for ramps default Z_MIN_PROBE_PIN on stm32 #25524

ellensp commented Mar 16, 2023 •

edited

Loading

ellensp commented Mar 16, 2023 •

edited

Loading

thinkyhead commented Mar 16, 2023

ellensp commented Mar 16, 2023 •

edited

Loading

thisiskeithb commented Mar 16, 2023

thinkyhead commented Mar 16, 2023

ellensp commented Mar 16, 2023

ellensp commented Mar 16, 2023 •

edited

Loading

test for ramps default Z_MIN_PROBE_PIN on stm32 #25524

test for ramps default Z_MIN_PROBE_PIN on stm32 #25524

Conversation

ellensp commented Mar 16, 2023 • edited Loading

Description

Benefits

ellensp commented Mar 16, 2023 • edited Loading

thinkyhead commented Mar 16, 2023

ellensp commented Mar 16, 2023 • edited Loading

thisiskeithb commented Mar 16, 2023

thinkyhead commented Mar 16, 2023

ellensp commented Mar 16, 2023

ellensp commented Mar 16, 2023 • edited Loading

ellensp commented Mar 16, 2023 •

edited

Loading

ellensp commented Mar 16, 2023 •

edited

Loading

ellensp commented Mar 16, 2023 •

edited

Loading

ellensp commented Mar 16, 2023 •

edited

Loading