…m lux value for each space type as per NECB

…or it in progress; Updated bundler version in openstudio-standards.gemspec

…ests to run. and only rake test:parallel_run_all_tests_locally

…rogress

… 2015 in progress

…ress

…results.

Correcting Warehouse wall orientation

Including changes to use OS 3.5.1 and changes in master

…AP1980TO2010; Added units of min illuminance level to space_type_unit_definitions.txt; Added reference of min illuminance level to all space_types.json of necb

…Modified unit test for daylighting sensor control ecm and updated expected results for it

…ailstandalone, and smallhotel, due to changes in daylighting sensor control ecm

…condary school due to changes in daylighting sensor control ecm

…or controls ECM

nrcan_375: modify daylighting sensor controls ECM

* replaced costing_enabled with intrinsic method to check if BTAPCosting is present

* replaced costing_enabled with intrinsic method to check if BTAPCosting is present

…for DOAS

…omment.

Including changes in nrcan branch.

Variable for zone heating equipment in ECN HS12 was not properly set for DOAS

Including boiler capacity floor.

…available heating and cooling capacities of the plant loops are equal to the autosized capacities

Information for chiller type and capacity ranges was based on survey of manufacturers data by Ali

…r based on compressor type

Added thermal bridging inventory

Set name of 'Screw' chillers to 'Rotary Screw'

Set default 'chiller_type' in file 'fuel_type_sets.json' to empty. In this case chiller type is set based on information in new file 'chiller_types.json'.

Update standard method for setting efficiency and curves of water cooled electric chillers to deal with the situation when the chiller name doesn't have information on the chiller type. If the name doesn't have information on the chiller type then this will be
set based on information from the new file 'chiller_types.json'.

Modify method in class 'BTAPPRE1980' to modify name of chiller when the original name doesn't include a compressor type

Update building regression tests osm files

…Studio 3.6.0.

Commenting out NRCan development gems.

Commenting out NRCan only development Gem require statements.

…pe" to none.

Including ability to not apply daylighting by setting "daylighting_type" to none.

Including ability to not apply daylighting by setting "daylighting_type" to none.

Add method for assigning performance curves and cop for chillers in ECM class

* Add json file for compressor type of air cooled chiller for ECM HS14

* Add water cooled chiller type json for NECB and update name of chiller based on compressor type

* Update initial name of water-cooled chiller in ECM HS14

Set name of 'Screw' chillers to 'Rotary Screw'

Set default 'chiller_type' in file 'fuel_type_sets.json' to empty. In this case chiller type is set based on information in new file 'chiller_types.json'.

Update standard method for setting efficiency and curves of water cooled electric chillers to deal with the situation when the chiller name doesn't have information on the chiller type. If the name doesn't have information on the chiller type then this will be
set based on information from the new file 'chiller_types.json'.

Modify method in class 'BTAPPRE1980' to modify name of chiller when the original name doesn't include a compressor type

Update building regression tests osm files

---------

Co-authored-by: khaddad <khaddad.energy.eng@gmail.com>

…nch and master.

…th regression test results using OS 3.5.1.

* Add json file for compressor type of air cooled chiller for ECM HS14

* Add water cooled chiller type json for NECB and update name of chiller based on compressor type

* Update initial name of water-cooled chiller in ECM HS14

Set name of 'Screw' chillers to 'Rotary Screw'

Set default 'chiller_type' in file 'fuel_type_sets.json' to empty. In this case chiller type is set based on information in new file 'chiller_types.json'.

Update standard method for setting efficiency and curves of water cooled electric chillers to deal with the situation when the chiller name doesn't have information on the chiller type. If the name doesn't have information on the chiller type then this will be
set based on information from the new file 'chiller_types.json'.

Modify method in class 'BTAPPRE1980' to modify name of chiller when the original name doesn't include a compressor type

Update building regression tests osm files

* Enabling gems required for NRCan development.

* Add NECB performance curves for air-cooled chillers

Add method for assigning performance curves and cop for chillers in ECM class

* Incorporating updates from nrcan branch (#1515)

* Add json file for compressor type of air cooled chiller for ECM HS14

* Add water cooled chiller type json for NECB and update name of chiller based on compressor type

* Update initial name of water-cooled chiller in ECM HS14

Set name of 'Screw' chillers to 'Rotary Screw'

Set default 'chiller_type' in file 'fuel_type_sets.json' to empty. In this case chiller type is set based on information in new file 'chiller_types.json'.

Update standard method for setting efficiency and curves of water cooled electric chillers to deal with the situation when the chiller name doesn't have information on the chiller type. If the name doesn't have information on the chiller type then this will be
set based on information from the new file 'chiller_types.json'.

Modify method in class 'BTAPPRE1980' to modify name of chiller when the original name doesn't include a compressor type

Update building regression tests osm files

---------

Co-authored-by: khaddad <khaddad.energy.eng@gmail.com>

* Updating regression tests from OS 3.5.1 to reflect merge of nrcan branch and master.

* Updating nrcan_os360_dev with changes to nrcan branch and updating with regression test results using OS 3.5.1.

---------

Co-authored-by: khaddad <khaddad.energy.eng@gmail.com>

… in preparation for merge with master.

… in preparation for merge with master. Commenting out development gems that are not used in master.

…s for 90.1-2016, 2019, and NREL ZNE Ready 2017

Made TBD a runtime dependency not just a development dependency.

Incorporating nrcan branch changes, udpating NRCan regression test expected results

- Add "air_loop_hvac_demand_control_ventilation_limits" method to deer.AirLoopHVAC.rb
- Add minimum floor area to applicable DEER templates in ThermalZone.rb

…radiant system

# Conflicts:
#	lib/openstudio-standards/standards/deer/deer.AirLoopHVAC.rb
#	lib/openstudio-standards/standards/deer/deer_2003/deer_2003.ThermalZone.rb
#	lib/openstudio-standards/standards/deer/deer_2007/deer_2007.ThermalZone.rb
#	lib/openstudio-standards/standards/deer/deer_2011/deer_2011.ThermalZone.rb
#	lib/openstudio-standards/standards/deer/deer_2014/deer_2014.ThermalZone.rb
#	lib/openstudio-standards/standards/deer/deer_2015/deer_2015.ThermalZone.rb
#	lib/openstudio-standards/standards/deer/deer_2017/deer_2017.ThermalZone.rb
#	lib/openstudio-standards/standards/deer/deer_2020/deer_2020.AirLoopHVAC.rb
#	lib/openstudio-standards/standards/deer/deer_2020/deer_2020.ThermalZone.rb

Feature/radiant controls update

- added `require_relative` for DEER code year files, such as ThermalZone and AirLoopHVAC

revert ashrae 90.1 changes and make them comstock specific

economizer implementation changes

Update test results for OS 3.6.1

VRF outdoor unit max_net_vert_distance calculation

Deer ventilation rates

Removes model_system_outdoor_air_sizing_vrp_method(air_loop) and air_loop_hvac_apply_vav_damper_action(air_loop) methods from the default constructor for VAV systems. Instead, default to ZoneSum for the controller mechanical ventilation, and single maximum for VAV reheat terminals.  Still apply these methods before the sizing run in the create PRM baseline and create prototype methods.

Also, harmonize the outdoor air system setup between the VAV and PVAV archetypes.