Add new gates to Photonics simulator

.github/workflows/config/spelling_allowlist.txt

@@ -258,6 +258,8 @@ qubit
 qubits
 qudit
 qudits
+qumode
+qumodes
 reStructuredText
 reconfigurable
 runtime

docs/sphinx/api/default_ops.rst

@@ -638,31 +638,67 @@ operations, each operating on 2 qubits.
 Photonic Operations on Qudits
 =============================
 
-These operations are valid only on the `orca-photonics` target which does not support the quantum operations above.
+These operations are valid only on the `orca-photonics` target which does not support
+the quantum operations above.
 
-:code:`plus`
+:code:`create`
 ---------------------
 
-This is a place-holder, to be updated later.
+This operation increments the number of photons in a qumode up to a maximum value
+defined by the qudit level that represents the qumode. If it is applied to a qumode
+where the number of photons is already at the maximum value, the operation has no
+effect.
+
+:math:`U|0\rangle → |1\rangle, U|1\rangle → |2\rangle, U|2\rangle → |3\rangle, \cdots, U|d\rangle → |d\rangle`
+where :math:`d` is the qudit level.
 
 .. tab:: Python
 
     .. code-block:: python
 
         q = qudit(3)
-        plus(q)
+        create(q)
 
 .. tab:: C++
 
     .. code-block:: cpp
 
         cudaq::qvector<3> q(1);
-        plus(q[0]);
+        create(q[0]);
+
+:code:`annihilate`
+---------------------
+
+This operation reduces the number of photons in a qumode up to a minimum value of
+0 representing the vacuum state. If it is applied to a qumode where the number of
+photons is already at the minimum value 0, the operation has no effect.
+
+:math:`U|0\rangle → |0\rangle, U|1\rangle → |0\rangle, U|2\rangle → |1\rangle, \cdots, U|d\rangle → |d-1\rangle`
+where :math:`d` is the qudit level.
+
+.. tab:: Python
+
+    .. code-block:: python
+
+        q = qudit(3)
+        annihilate(q)
+
+.. tab:: C++
+
+    .. code-block:: cpp
+
+        cudaq::qvector<3> q(1);
+        annihilate(q[0]);
 
 :code:`phase_shift`
 ---------------------
 
-This is a place-holder, to be updated later.
+A phase shifter adds a phase :math:`\phi` on a qumode. For the annihilation (:math:`a_1`)
+and creation operators (:math:`a_1^\dagger`) of a qumode, the phase shift operator
+is defined  by
+
+.. math::
+    P(\phi) = \exp\left(i \phi a_1^\dagger a_1  \right)
 
 .. tab:: Python
 
@@ -681,7 +717,13 @@ This is a place-holder, to be updated later.
 :code:`beam_splitter`
 ---------------------
 
-This is a place-holder, to be updated later.
+Beam splitters act on two qumodes together and it is parameterized by a single angle 
+:math:`\theta`, relating to reflectivity.
+For the annihilation (:math:`a_1` and :math:`a_2`) and creation operators (:math:`a_1^\dagger`
+and :math:`a_2^\dagger`) of two qumodes, the beam splitter operator is defined by
+
+.. math::
+    B(\theta) = \exp\left[i \theta (a_1^\dagger a_2 + a_1 a_2^\dagger) \right]
 
 .. tab:: Python
 
@@ -700,19 +742,19 @@ This is a place-holder, to be updated later.
 :code:`mz`
 ---------------------
 
-This operation returns the measurement results of the input qudit(s).
+This operation returns the measurement results of the input qumode(s).
 
 .. tab:: Python
 
     .. code-block:: python
 
-        qutrits = [qudit(3) for _ in range(2)]
-        mz(qutrits)
+        qumodes = [qudit(3) for _ in range(2)]
+        mz(qumodes)
 
 
 .. tab:: C++
 
     .. code-block:: cpp
 
-        cudaq::qvector<3> qutrits(2);
-        mz(qutrits);
+        cudaq::qvector<3> qumodes(2);
+        mz(qumodes);

docs/sphinx/targets/cpp/orca.cpp

@@ -5,24 +5,13 @@
 // To use the ORCA Computing target you will need to set the ORCA_ACCESS_URL
 // environment variable or pass the URL to the `--orca-url` flag.
 
-#include "cudaq/orca.h"
-#include "cudaq.h"
 #include <chrono>
+#include <cudaq.h>
+#include <cudaq/orca.h>
 #include <fstream>
 #include <iostream>
 #include <thread>
 
-// define helper function to generate linear spaced vectors
-template <typename T>
-void linear_spaced_vector(std::vector<T> &xs, T min, T max, std::size_t N) {
-  T h = (max - min) / static_cast<T>(N - 1);
-  typename std::vector<T>::iterator x;
-  T val;
-  for (x = xs.begin(), val = min; x != xs.end(); ++x, val += h) {
-    *x = val;
-  }
-}
-
 int main() {
   using namespace std::this_thread;     // sleep_for, sleep_until
   using namespace std::chrono_literals; // `ns`, `us`, `ms`, `s`, `h`, etc.
@@ -39,10 +28,10 @@ int main() {
 
   // half of 8 time bins is filled with a single photon and the other half is
   // filled with the vacuum state (empty)
-  std::vector<std::size_t> input_state{1, 0, 1, 0, 1, 0, 1, 0};
+  std::vector<std::size_t> input_state = {1, 0, 1, 0, 1, 0, 1, 0};
 
   // The time bin interferometer in this example has two loops, each of length 1
-  std::vector<std::size_t> loop_lengths{1, 1};
+  std::vector<std::size_t> loop_lengths = {1, 1};
 
   // helper variables to calculate the number of beam splitters and phase
   // shifters needed in the TBI
@@ -53,18 +42,18 @@ int main() {
   const std::size_t n_beam_splitters = n_loops * n_modes - sum_loop_lengths;
 
   // beam splitter angles (created as a linear spaced vector of angles)
-  std::vector<double> bs_angles(n_beam_splitters);
-  linear_spaced_vector(bs_angles, M_PI / 8, M_PI / 3, n_beam_splitters);
+  std::vector<double> bs_angles =
+      cudaq::linspace(M_PI / 3, M_PI / 6, n_beam_splitters);
 
   // Optionally, we can also specify the phase shifter angles (created as a
   // linear spaced vector of angles), if the system includes phase shifters
   // ```
-  // std::vector<double> ps_angles(n_beam_splitters);
-  // linear_spaced_vector(ps_angles, M_PI / 6, M_PI / 3, n_beam_splitters);
+  // std::vector<double> ps_angles = cudaq::linspace(M_PI / 3, M_PI / 5,
+  // n_beam_splitters);
   // ```
 
   // we can also set number of requested samples
-  int n_samples{10000};
+  int n_samples = 10000;
 
   // Submit to ORCA synchronously (e.g., wait for the job result to be
   // returned before proceeding with the rest of the execution).

docs/sphinx/targets/cpp/orca_mqpu.cpp

@@ -5,40 +5,28 @@
 // ```
 // See accompanying example `orca.cpp` for detailed explanation.
 
-#include "cudaq.h"
-#include "cudaq/orca.h"
-
+#include <cudaq.h>
+#include <cudaq/orca.h>
 #include <fstream>
 #include <iostream>
 
-// define helper function to generate linear spaced vectors
-template <typename T>
-void linear_spaced_vector(std::vector<T> &xs, T min, T max, std::size_t N) {
-  T h = (max - min) / static_cast<T>(N - 1);
-  typename std::vector<T>::iterator x;
-  T val;
-  for (x = xs.begin(), val = min; x != xs.end(); ++x, val += h) {
-    *x = val;
-  }
-}
-
 int main() {
 
   auto &platform = cudaq::get_platform();
   auto num_qpus = platform.num_qpus();
   printf("Number of QPUs: %zu\n", num_qpus);
 
   // A time-bin boson sampling experiment
-  std::vector<std::size_t> input_state{1, 0, 1, 0, 1, 0, 1, 0};
-  std::vector<std::size_t> loop_lengths{1, 1};
+  std::vector<std::size_t> input_state = {1, 0, 1, 0, 1, 0, 1, 0};
+  std::vector<std::size_t> loop_lengths = {1, 1};
   std::size_t sum_loop_lengths{std::accumulate(
       loop_lengths.begin(), loop_lengths.end(), static_cast<std::size_t>(0))};
   const std::size_t n_loops = loop_lengths.size();
   const std::size_t n_modes = input_state.size();
   const std::size_t n_beam_splitters = n_loops * n_modes - sum_loop_lengths;
-  std::vector<double> bs_angles(n_beam_splitters);
-  linear_spaced_vector(bs_angles, M_PI / 8, M_PI / 3, n_beam_splitters);
-  int n_samples{10000};
+  std::vector<double> bs_angles =
+      cudaq::linspace(M_PI / 3, M_PI / 6, n_beam_splitters);
+  int n_samples = 10000;
 
   std::cout << "Submitting to ORCA Server asynchronously" << std::endl;
   std::vector<cudaq::async_sample_result> countFutures;

docs/sphinx/targets/cpp/photonics.cpp

@@ -9,20 +9,18 @@
 
 struct photonicsKernel {
   void operator()() __qpu__ {
-    cudaq::qvector<3> qutrits(2);
-    plus(qutrits[0]);
-    plus(qutrits[1]);
-    plus(qutrits[1]);
-    mz(qutrits);
+    cudaq::qvector<3> qumodes(2);
+    create(qumodes[0]);
+    create(qumodes[1]);
+    create(qumodes[1]);
+    mz(qumodes);
   }
 };
 
 int main() {
 
   auto counts = cudaq::sample(photonicsKernel{});
-  for (auto &[k, v] : counts) {
-    printf("Result : Count = %s : %lu\n", k.c_str(), v);
-  }
+  counts.dump();
 
   auto state = cudaq::get_state(photonicsKernel{});
   state.dump();