add appliance firewall

add appliance firewall

Usage

stack add appliance firewall {appliance ...} [action=string] [chain=string] [network=string] [output-network=string] [protocol=string] [rulename=string] [service=string] [table=string]

Description

Add a firewall rule for an appliance type.

Arguments

• [appliance]

  Appliance type (e.g., "backend").

Parameters

• {action=string}

• {chain=string}

• {network=string}

• {output-network=string}

• {protocol=string}

• {rulename=string}

• {service=string}

• {table=string}

  The table to add the rule to. Valid values are 'filter', 'nat', 'mangle', and 'raw'. If this parameter is not specified, it defaults to 'filter'

Examples

• stack add appliance firewall login network=private service="all" protocol="all" action="ACCEPT" chain="FORWARD"

  Accept all services and all protocols on the private network for the FORWARD chain. If 'eth0' is associated with the private network on a login appliance, then this will be translated as the following iptables rule: "-A FORWARD -i eth0 -j ACCEPT"

• stack add appliance firewall login network=all service="8649" protocol="udp" action="REJECT" chain="INPUT"

  Reject UDP packets with a destination port of 8649 on all networks for the INPUT chain. On login appliances, this will be translated into the following iptables rule: "-A INPUT -p udp --dport 8649 -j REJECT"