add JustBoom audio boards? #6
Comments
|
We have not yet tried the JustBoom board but we are glad to try this board for you. By the way, we can support the Hi-Fi berry and IQAudio DAC boards. |
|
I think you just replied to my email also :-) I can send you free samples of all of our boards to add support! Thanks for your reply |
|
Hi, |
|
Thanks!
…On Mon, Dec 4, 2017 at 4:11 AM, Jamess, Huang ***@***.***> wrote:
Hi,
Let's discuss in the email, I will close this issue. Thanks for your
interest in Tinker Board.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#6 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADNCuvGfZUeGI26K5U43WwOV9Kwqukr4ks5s83DcgaJpZM4QyxPM>
.
|
|
@jamess-huang did you see my email yet? |
jamess-huang
pushed a commit
that referenced
this issue
Apr 13, 2018
[ Upstream commit ec4fbd64751de18729eaa816ec69e4b504b5a7a2 ] Dmitry reported a lockdep splat [1] (false positive) that we can fix by releasing the spinlock before calling icmp_send() from ip_expire() This is a false positive because sending an ICMP message can not possibly re-enter the IP frag engine. [1] [ INFO: possible circular locking dependency detected ] 4.10.0+ #29 Not tainted ------------------------------------------------------- modprobe/12392 is trying to acquire lock: (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock include/linux/spinlock.h:299 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock include/linux/netdevice.h:3486 [inline] (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 but task is already holding lock: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&q->lock)->rlock){+.-...}: validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669 ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713 packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459 deliver_skb net/core/dev.c:1834 [inline] dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890 xmit_one net/core/dev.c:2903 [inline] dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923 sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308 neigh_output include/net/neighbour.h:478 [inline] ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228 ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672 ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545 ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985 __sys_sendmmsg+0x25c/0x750 net/socket.c:2075 SYSC_sendmmsg net/socket.c:2106 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2101 do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281 return_from_SYSCALL_64+0x0/0x7a -> #0 (_xmit_ETHER#2){+.-...}: check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 __read_once_size include/linux/compiler.h:254 [inline] atomic_read arch/x86/include/asm/atomic.h:26 [inline] rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] __rcu_is_watching kernel/rcu/tree.c:1133 [inline] rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); lock(&(&q->lock)->rlock); lock(_xmit_ETHER#2); *** DEADLOCK *** 10 locks held by modprobe/12392: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>] __do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336 #1: (rcu_read_lock){......}, at: [<ffffffff8188cab6>] filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324 #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] spin_lock include/linux/spinlock.h:299 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] pte_alloc_one_map mm/memory.c:2944 [inline] #2: (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>] alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072 #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] lockdep_copy_map include/linux/lockdep.h:175 [inline] #3: (((&q->timer))){+.-...}, at: [<ffffffff81627e72>] call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258 #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock include/linux/spinlock.h:299 [inline] #4: (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201 #5: (rcu_read_lock){......}, at: [<ffffffff8389a633>] ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216 #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock include/linux/spinlock.h:309 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock net/ipv4/icmp.c:219 [inline] #6: (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681 #7: (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>] ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198 #8: (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>] __dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324 #9: (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at: [<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 stack backtrace: CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204 check_prev_add kernel/locking/lockdep.c:1830 [inline] check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940 validate_chain kernel/locking/lockdep.c:2267 [inline] __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:299 [inline] __netif_tx_lock include/linux/netdevice.h:3486 [inline] sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180 __dev_xmit_skb net/core/dev.c:3092 [inline] __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423 neigh_hh_output include/net/neighbour.h:468 [inline] neigh_output include/net/neighbour.h:476 [inline] ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404 dst_output include/net/dst.h:486 [inline] ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268 expire_timers kernel/time/timer.c:1307 [inline] __run_timers+0x960/0xcf0 kernel/time/timer.c:1601 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:657 [inline] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707 RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline] RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline] RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147 RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10 RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000 R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25 R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000 </IRQ> rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline] filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335 do_fault_around mm/memory.c:3231 [inline] do_read_fault mm/memory.c:3265 [inline] do_fault+0xbd5/0x2080 mm/memory.c:3370 handle_pte_fault mm/memory.c:3600 [inline] __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011 RIP: 0033:0x7f83172f2786 RSP: 002b:00007fffe859ae80 EFLAGS: 00010293 RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970 RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000 R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040 R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jamess-huang
pushed a commit
that referenced
this issue
May 14, 2018
According to the dwc2 programmer's guide v3.10a, in '2.1.3.2 Dedicated FIFO Mode with No Thresholding', it suggested that: Device RxFIFO = - Scatter/Gather DMA mode: (4 * number of control endpoints + 6) + ((largest USB packet used / 4) + 1 for status information) + (2 * number of OUT endpoints) + 1 for Global NAK on rockchip platforms: (4 * 1 + 6) + ((1024 / 4) + 1) + (2 * 6) + 1 = 280 - Slave or Buffer DMA mode: (5 * number of control endpoints + 8) + ((largest USB packet used / 4) + 1 for status information) + (2 * number of OUT endpoints) + 1 for Global NAK on rockchip platforms: (5 * 1 + 8) + ((1024 / 4) + 1) + (2 * 6) + 1 = 283 Device IN Endpoint TxFIFO = The TxFIFO must equal at least one MaxPacketSize (MPS). In addition to RxFIFO and TxFIFOs, refer to dwc2 databook v3.10a, 'Figure 2-13 Device Mode FIFO Address Mapping and AHB FIFO Access Mapping (Dedicated FIFO)', it required that when the device is operating in non Scatter Gather Internal DMA mode, the last locations of the SPRAM are used to store the DMAADDR values for each Endpoint (1 location per endpoint). When the device is operating in Scatter Gather mode, then the last locations of the SPRAM store the Base Descriptor address, Current Descriptor address, Current Buffer address, and status quadlet information for each endpoint direction (4 locations per Endpoint). If an Endpoint is bidirectional , then 4 locations will be used for IN, and another 4 for OUT). Considering that the total FIFO size of dwc2 otg is 0x3cc (972), and we must reserve (4 * 13) = 52 locations for all Endpoints. So reconfig dwc2 device fifo size as follows: Device RxFIFO = 280 Device IN Endpoint TxFIFO - FIFO #0 = (64 / 4) = 16 (Assuming this is used for EP0) - FIFO #1 = (1024/4) = 256 (Assuming this is used for Isochronous) - FIFO #2 = (512/4) = 128 - FIFO #3 = (512/4) = 128 - FIFO #4 = (256/4) = 64 - FIFO #5 = (128/4) = 32 - FIFO #6 = (64/4) = 16 After reconfig the dwc2 device fifo size, test mtp write on rockchip platform (PC -> rockchip platform) on rk312x/rk3326/px30/rk3288 evb, when mask the 'vfs_write' in f_mtp.c, the writing data rate can be increased from 16MBps ~ 20MBps to 30MBps ~ 36MBps on different kinds of rockchip evbs. Change-Id: Icdf8a5dd95f96d174233e4ffc765c9a982b9f0b6 Signed-off-by: William Wu <william.wu@rock-chips.com>
jamess-huang
pushed a commit
that referenced
this issue
May 14, 2018
According to the dwc2 programmer's guide v3.10a, in '2.1.3.2 Dedicated FIFO Mode with No Thresholding', it suggested that: Device RxFIFO = - Scatter/Gather DMA mode: (4 * number of control endpoints + 6) + ((largest USB packet used / 4) + 1 for status information) + (2 * number of OUT endpoints) + 1 for Global NAK on rockchip platforms: (4 * 1 + 6) + ((1024 / 4) + 1) + (2 * 6) + 1 = 280 - Slave or Buffer DMA mode: (5 * number of control endpoints + 8) + ((largest USB packet used / 4) + 1 for status information) + (2 * number of OUT endpoints) + 1 for Global NAK on rockchip platforms: (5 * 1 + 8) + ((1024 / 4) + 1) + (2 * 6) + 1 = 283 Device IN Endpoint TxFIFO = The TxFIFO must equal at least one MaxPacketSize (MPS). In addition to RxFIFO and TxFIFOs, refer to dwc2 databook v3.10a, 'Figure 2-13 Device Mode FIFO Address Mapping and AHB FIFO Access Mapping (Dedicated FIFO)', it required that when the device is operating in non Scatter Gather Internal DMA mode, the last locations of the SPRAM are used to store the DMAADDR values for each Endpoint (1 location per endpoint). When the device is operating in Scatter Gather mode, then the last locations of the SPRAM store the Base Descriptor address, Current Descriptor address, Current Buffer address, and status quadlet information for each endpoint direction (4 locations per Endpoint). If an Endpoint is bidirectional , then 4 locations will be used for IN, and another 4 for OUT). Considering that the total FIFO size of dwc2 otg is 0x3cc (972), and we must reserve (4 * 13) = 52 locations for all Endpoints. So reconfig dwc2 device fifo size as follows: Device RxFIFO = 280 Device IN Endpoint TxFIFO - FIFO #0 = (64 / 4) = 16 (Assuming this is used for EP0) - FIFO #1 = (1024/4) = 256 (Assuming this is used for Isochronous) - FIFO #2 = (512/4) = 128 - FIFO #3 = (512/4) = 128 - FIFO #4 = (256/4) = 64 - FIFO #5 = (128/4) = 32 - FIFO #6 = (64/4) = 16 After reconfig the dwc2 device fifo size, test mtp write on rockchip platform (PC -> rockchip platform) on rk312x/rk3326/px30/rk3288 evb, when mask the 'vfs_write' in f_mtp.c, the writing data rate can be increased from 16MBps ~ 20MBps to 30MBps ~ 36MBps on different kinds of rockchip evbs. Change-Id: I52c64a279523c811f706e69e427b0a6e8c45683b Signed-off-by: William Wu <william.wu@rock-chips.com>
jamess-huang
pushed a commit
that referenced
this issue
Jun 28, 2018
[ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco@canonical.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bauuuuu
pushed a commit
to Bauuuuu/debian_kernel
that referenced
this issue
Dec 5, 2018
[ Upstream commit 2c0aa08631b86a4678dbc93b9caa5248014b4458 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 TinkerBoard#1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 TinkerBoard#2 [ffff898e35f15b30] oops_end at ffffffff8150f518 TinkerBoard#3 [ffff898e35f15b60] no_context at ffffffff8104854c TinkerBoard#4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 TinkerBoard#5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 TinkerBoard#6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 TinkerBoard#7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 TinkerBoard#8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] TinkerBoard#9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 TinkerBoard#10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 TinkerBoard#11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 TinkerBoard#1 [ffff881024ccfd40] schedule at ffffffff8150c2cf TinkerBoard#2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 TinkerBoard#3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb TinkerBoard#4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] TinkerBoard#5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] TinkerBoard#6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] TinkerBoard#7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] TinkerBoard#8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <guanglei.li@oracle.com> Signed-off-by: Honglei Wang <honglei.wang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bauuuuu
pushed a commit
to Bauuuuu/debian_kernel
that referenced
this issue
Dec 5, 2018
[ Upstream commit 2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 TinkerBoard#1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 TinkerBoard#2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 TinkerBoard#3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef TinkerBoard#4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] TinkerBoard#5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 TinkerBoard#6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 TinkerBoard#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] TinkerBoard#8 [ffff880078447da8] mount_bdev at ffffffff81202570 TinkerBoard#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] TinkerBoard#10 [ffff880078447e28] mount_fs at ffffffff81202d09 TinkerBoard#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f TinkerBoard#12 [ffff880078447ea8] do_mount at ffffffff81220fee TinkerBoard#13 [ffff880078447f28] sys_mount at ffffffff812218d6 TinkerBoard#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 TinkerBoard#1 [ffff880078417900] schedule at ffffffff8168dc59 TinkerBoard#2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 TinkerBoard#3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 TinkerBoard#4 [ffff8800784179d0] down_read at ffffffff8168cde0 TinkerBoard#5 [ffff8800784179e8] get_super at ffffffff81201cc7 TinkerBoard#6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de TinkerBoard#7 [ffff880078417a40] flush_disk at ffffffff8123a94b TinkerBoard#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 TinkerBoard#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] TinkerBoard#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] TinkerBoard#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 TinkerBoard#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 TinkerBoard#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b TinkerBoard#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 TinkerBoard#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf TinkerBoard#16 [ffff880078417d00] do_last at ffffffff8120d53d TinkerBoard#17 [ffff880078417db0] path_openat at ffffffff8120e6b2 TinkerBoard#18 [ffff880078417e48] do_filp_open at ffffffff8121082b TinkerBoard#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 TinkerBoard#20 [ffff880078417f70] sys_open at ffffffff811fde4e TinkerBoard#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bauuuuu
pushed a commit
to Bauuuuu/debian_kernel
that referenced
this issue
Dec 7, 2018
commit 89da619bc18d79bca5304724c11d4ba3b67ce2c6 upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb TinkerBoard#1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 TinkerBoard#2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 TinkerBoard#3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 TinkerBoard#4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 TinkerBoard#5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc TinkerBoard#6 [ffff881ec7ed7838] __node_set at ffffffff81680300 TinkerBoard#7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f TinkerBoard#8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 TinkerBoard#9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bauuuuu
pushed a commit
to Bauuuuu/debian_kernel
that referenced
this issue
Dec 7, 2018
commit 3e536e222f2930534c252c1cc7ae799c725c5ff9 upstream. There is a window for racing when printing directly to task->comm, allowing other threads to see a non-terminated string. The vsnprintf function fills the buffer, counts the truncated chars, then finally writes the \0 at the end. creator other vsnprintf: fill (not terminated) count the rest trace_sched_waking(p): ... memcpy(comm, p->comm, TASK_COMM_LEN) write \0 The consequences depend on how 'other' uses the string. In our case, it was copied into the tracing system's saved cmdlines, a buffer of adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be): crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk' 0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12" ...and a strcpy out of there would cause stack corruption: [224761.522292] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff9bf9783c78 crash-arm64> kbt | grep 'comm\|trace_print_context' TinkerBoard#6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396) comm (char [16]) = "irq/497-pwr_even" crash-arm64> rd 0xffffffd4d0e17d14 8 ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_ ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16: ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`.. ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`.......... The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was likely needed because of this same bug. Solved by vsnprintf:ing to a local buffer, then using set_task_comm(). This way, there won't be a window where comm is not terminated. Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com Cc: stable@vger.kernel.org Fixes: bc0c38d ("ftrace: latency tracer infrastructure") Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Snild Dolkow <snild@sony.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [backported to 3.18 / 4.4 by Snild] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bauuuuu
pushed a commit
to Bauuuuu/debian_kernel
that referenced
this issue
Dec 7, 2018
commit 89da619bc18d79bca5304724c11d4ba3b67ce2c6 upstream. Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb TinkerBoard#1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 TinkerBoard#2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 TinkerBoard#3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 TinkerBoard#4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 TinkerBoard#5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc TinkerBoard#6 [ffff881ec7ed7838] __node_set at ffffffff81680300 TinkerBoard#7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f TinkerBoard#8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 TinkerBoard#9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi,
We would like to add the JustBoom audio boards to your platform. What is the process for this?
Thanks
The text was updated successfully, but these errors were encountered: