xpad (xbox controller family) fixes #15
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
At startup with the pad already powered-on there's a small window of time when we can start getting input packets before there's a kernel input device set up to receive events. This would crash. I know this happens with my xbox360 wireless pad (kernel 3.13.0) and caused me occasional boot crashes. The fix catches this. I've put the same guard in the xpad and xboxone input routines; I don't have appropriate devices but it seems like this can only be benign.
move xpad_send_led_command outside of the #ifdef, since it's still used either way.
Was re-using an urb without acquiring the lock. Should fix kernel warnings of this nature: "URB ffff88020d047d80 submitted while active"
Immediately after becoming present, we send the LED change request to the pad. There is then a race where the input device may be opened and closed before the request's urb is actually transmitted, in which case the LED change is just dropped because of the usb_kill_urb(). This was actually happening almost all the time for me. We really still want any outstanding output state changes to get through, so just don't do usb_kill_urb() on the wireless xbox360 device. (This issue is perfectly likely to also affect other pad types, but I've been conservative with the change. It may also help with a similar issue with dropped rumble state change immediately before a close - unverified.)
|
Sadly adamdmoss@3e6434d doesn't fix the warning I was hoping it was fixing, but I believe the additional locking in that commit is still needed. |
fledermaus
pushed a commit
to fledermaus/steamos_kernel
that referenced
this pull request
Jun 26, 2015
commit 0430e49 upstream. Commit 8aac627 "move exit_task_namespaces() outside of exit_notify" introduced the kernel opps since the kernel v3.10, which happens when Apparmor and IMA-appraisal are enabled at the same time. ---------------------------------------------------------------------- [ 106.750167] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 106.750221] IP: [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.750241] PGD 0 [ 106.750254] Oops: 0000 [ValveSoftware#1] SMP [ 106.750272] Modules linked in: cuse parport_pc ppdev bnep rfcomm bluetooth rpcsec_gss_krb5 nfsd auth_rpcgss nfs_acl nfs lockd sunrpc fscache dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd snd_hda_codec_realtek dcdbas snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi psmouse snd_seq microcode serio_raw snd_timer snd_seq_device snd soundcore video lpc_ich coretemp mac_hid lp parport mei_me mei nbd hid_generic e1000e usbhid ahci ptp hid libahci pps_core [ 106.750658] CPU: 6 PID: 1394 Comm: mysqld Not tainted 3.13.0-rc7-kds+ ValveSoftware#15 [ 106.750673] Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A08 09/19/2012 [ 106.750689] task: ffff8800de804920 ti: ffff880400fca000 task.ti: ffff880400fca000 [ 106.750704] RIP: 0010:[<ffffffff811ec7da>] [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.750725] RSP: 0018:ffff880400fcba60 EFLAGS: 00010286 [ 106.750738] RAX: 0000000000000000 RBX: 0000000000000100 RCX: ffff8800d51523e7 [ 106.750764] RDX: ffffffffffffffea RSI: ffff880400fcba34 RDI: ffff880402d20020 [ 106.750791] RBP: ffff880400fcbae0 R08: 0000000000000000 R09: 0000000000000001 [ 106.750817] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800d5152300 [ 106.750844] R13: ffff8803eb8df510 R14: ffff880400fcbb28 R15: ffff8800d51523e7 [ 106.750871] FS: 0000000000000000(0000) GS:ffff88040d200000(0000) knlGS:0000000000000000 [ 106.750910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.750935] CR2: 0000000000000018 CR3: 0000000001c0e000 CR4: 00000000001407e0 [ 106.750962] Stack: [ 106.750981] ffffffff813434eb ffff880400fcbb20 ffff880400fcbb18 0000000000000000 [ 106.751037] ffff8800de804920 ffffffff8101b9b9 0001800000000000 0000000000000100 [ 106.751093] 0000010000000000 0000000000000002 000000000000000e ffff8803eb8df500 [ 106.751149] Call Trace: [ 106.751172] [<ffffffff813434eb>] ? aa_path_name+0x2ab/0x430 [ 106.751199] [<ffffffff8101b9b9>] ? sched_clock+0x9/0x10 [ 106.751225] [<ffffffff8134a68d>] aa_path_perm+0x7d/0x170 [ 106.751250] [<ffffffff8101b945>] ? native_sched_clock+0x15/0x80 [ 106.751276] [<ffffffff8134aa73>] aa_file_perm+0x33/0x40 [ 106.751301] [<ffffffff81348c5e>] common_file_perm+0x8e/0xb0 [ 106.751327] [<ffffffff81348d78>] apparmor_file_permission+0x18/0x20 [ 106.751355] [<ffffffff8130c853>] security_file_permission+0x23/0xa0 [ 106.751382] [<ffffffff811c77a2>] rw_verify_area+0x52/0xe0 [ 106.751407] [<ffffffff811c789d>] vfs_read+0x6d/0x170 [ 106.751432] [<ffffffff811cda31>] kernel_read+0x41/0x60 [ 106.751457] [<ffffffff8134fd45>] ima_calc_file_hash+0x225/0x280 [ 106.751483] [<ffffffff8134fb52>] ? ima_calc_file_hash+0x32/0x280 [ 106.751509] [<ffffffff8135022d>] ima_collect_measurement+0x9d/0x160 [ 106.751536] [<ffffffff810b552d>] ? trace_hardirqs_on+0xd/0x10 [ 106.751562] [<ffffffff8134f07c>] ? ima_file_free+0x6c/0xd0 [ 106.751587] [<ffffffff81352824>] ima_update_xattr+0x34/0x60 [ 106.751612] [<ffffffff8134f0d0>] ima_file_free+0xc0/0xd0 [ 106.751637] [<ffffffff811c9635>] __fput+0xd5/0x300 [ 106.751662] [<ffffffff811c98ae>] ____fput+0xe/0x10 [ 106.751687] [<ffffffff81086774>] task_work_run+0xc4/0xe0 [ 106.751712] [<ffffffff81066fad>] do_exit+0x2bd/0xa90 [ 106.751738] [<ffffffff8173c958>] ? retint_swapgs+0x13/0x1b [ 106.751763] [<ffffffff8106780c>] do_group_exit+0x4c/0xc0 [ 106.751788] [<ffffffff81067894>] SyS_exit_group+0x14/0x20 [ 106.751814] [<ffffffff8174522d>] system_call_fastpath+0x1a/0x1f [ 106.751839] Code: c3 0f 1f 44 00 00 55 48 89 e5 e8 22 fe ff ff 5d c3 0f 1f 44 00 00 55 65 48 8b 04 25 c0 c9 00 00 48 8b 80 28 06 00 00 48 89 e5 5d <48> 8b 40 18 48 39 87 c0 00 00 00 0f 94 c0 c3 0f 1f 80 00 00 00 [ 106.752185] RIP [<ffffffff811ec7da>] our_mnt+0x1a/0x30 [ 106.752214] RSP <ffff880400fcba60> [ 106.752236] CR2: 0000000000000018 [ 106.752258] ---[ end trace 3c520748b4732721 ]--- ---------------------------------------------------------------------- The reason for the oops is that IMA-appraisal uses "kernel_read()" when file is closed. kernel_read() honors LSM security hook which calls Apparmor handler, which uses current->nsproxy->mnt_ns. The 'guilty' commit changed the order of cleanup code so that nsproxy->mnt_ns was not already available for Apparmor. Discussion about the issue with Al Viro and Eric W. Biederman suggested that kernel_read() is too high-level for IMA. Another issue, except security checking, that was identified is mandatory locking. kernel_read honors it as well and it might prevent IMA from calculating necessary hash. It was suggested to use simplified version of the function without security and locking checks. This patch introduces special version ima_kernel_read(), which skips security and mandatory locking checking. It prevents the kernel oops to happen. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Plagman
pushed a commit
that referenced
this pull request
Sep 16, 2015
[ Upstream commit ecf5fc6 ] Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
johnv-valve
pushed a commit
that referenced
this pull request
Nov 18, 2016
[ Upstream commit adc8a43 ] Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df ('ALSA: line6: Reorganize PCM stream handling') Cc: <stable@vger.kernel.org> # v4.0+ Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
johnv-valve
pushed a commit
that referenced
this pull request
Jul 24, 2017
commit 2474623 upstream. When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
johnv-valve
pushed a commit
that referenced
this pull request
Jan 5, 2018
[ Upstream commit eeea10b ] James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72c ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10e ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This fixes one crash, one kernel warning, one semi-broken feature and one obscure build failure.
More details on each individual commit message.
Tested as a dkms module on kernel 3.13.0(-29) in Ubuntu 14.04.