[Non-Forked] ✨Source Retently: Migrate Python CDK to Low-code CDK

airbyte-integrations/connectors/source-retently/.dockerignore

@@ -1,6 +1,5 @@
 *
 !Dockerfile
-!Dockerfile.test
 !main.py
 !source_retently
 !setup.py

airbyte-integrations/connectors/source-retently/Dockerfile

@@ -1,13 +1,13 @@
-FROM python:3.9-slim as base
+FROM python:3.9.11-alpine3.15 as base
 
 # build and load all requirements
 FROM base as builder
 WORKDIR /airbyte/integration_code
 
 # upgrade pip to the latest version
-# RUN apk --no-cache upgrade \
-#     && pip install --upgrade pip \
-#     && apk --no-cache add tzdata
+RUN apk --no-cache upgrade \
+    && pip install --upgrade pip \
+    && apk --no-cache add tzdata build-base
 
 
 COPY setup.py ./
@@ -25,7 +25,7 @@ COPY --from=builder /usr/share/zoneinfo/Etc/UTC /etc/localtime
 RUN echo "Etc/UTC" > /etc/timezone
 
 # bash is installed for more convenient debugging.
-# RUN apk --no-cache add bash
+RUN apk --no-cache add bash
 
 # copy payload code only
 COPY main.py ./
@@ -34,5 +34,5 @@ COPY source_retently ./source_retently
 ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
 ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]
 
-LABEL io.airbyte.version=0.1.6
+LABEL io.airbyte.version=1.0.0
 LABEL io.airbyte.name=airbyte/source-retently

airbyte-integrations/connectors/source-retently/README.md

@@ -1,34 +1,10 @@
 # Retently Source
 
-This is the repository for the Retently source connector, written in Python.
-For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/retently).
+This is the repository for the Retently configuration based source connector.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/retently).
 
 ## Local development
 
-### Prerequisites
-**To iterate on this connector, make sure to complete this prerequisites section.**
-
-#### Minimum Python version required `= 3.7.0`
-
-#### Build & Activate Virtual Environment and install dependencies
-From this connector directory, create a virtual environment:
-```
-python -m venv .venv
-```
-
-This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
-development environment of choice. To activate it from the terminal, run:
-```
-source .venv/bin/activate
-pip install -r requirements.txt
-```
-If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
-
-Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
-used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
-If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
-should work as you expect.
-
 #### Building via Gradle
 You can also build the connector in Gradle. This is typically used in CI and not needed for your development workflow.
 
@@ -38,22 +14,14 @@ To build using Gradle, from the Airbyte repository root, run:
 ```
 
 #### Create credentials
-**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/retently)
-to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_retently/spec.json` file.
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/retently)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_retently/spec.yaml` file.
 Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
 See `integration_tests/sample_config.json` for a sample config file.
 
 **If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source retently test creds`
 and place them into `secrets/config.json`.
 
-### Locally running the connector
-```
-python main.py spec
-python main.py check --config secrets/config.json
-python main.py discover --config secrets/config.json
-python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
-```
-
 ### Locally running the connector docker image
 
 #### Build
@@ -78,32 +46,15 @@ docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-retently:dev discover
 docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-retently:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
 ```
 ## Testing
-Make sure to familiarize yourself with [pytest test discovery](https://docs.pytest.org/en/latest/goodpractices.html#test-discovery) to know how your test files and methods should be named.
-First install test dependencies into your virtual environment:
-```
-pip install .[tests]
-```
-### Unit Tests
-To run unit tests locally, from the connector directory run:
-```
-python -m pytest unit_tests
-```
 
-### Integration Tests
-There are two types of integration tests: Acceptance Tests (Airbyte's test suite for all source connectors) and custom integration tests (which are specific to this connector).
-#### Custom Integration tests
-Place custom tests inside `integration_tests/` folder, then, from the connector root, run
-```
-python -m pytest integration_tests
-```
 #### Acceptance Tests
-Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.io/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
 If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
-To run your integration tests with acceptance tests, from the connector root, run
+
+To run your integration tests with Docker, run:
 ```
-python -m pytest integration_tests -p integration_tests.acceptance
+./acceptance-test-docker.sh
 ```
-To run your integration tests with docker
 
 ### Using gradle to run tests
 All commands should be run from airbyte project root.

airbyte-integrations/connectors/source-retently/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-integrations/connectors/source-retently/acceptance-test-config.yml

@@ -4,28 +4,26 @@ connector_image: airbyte/source-retently:dev
 acceptance_tests:
   spec:
     tests:
-      - spec_path: "source_retently/spec.json"
+      - spec_path: "source_retently/spec.yaml"
   connection:
     tests:
       - config_path: "secrets/config.json"
         status: "succeed"
-      - config_path: "secrets/old_config.json"
-        status: "succeed"
-      - config_path: "secrets/config_oauth.json"
-        status: "succeed"
       - config_path: "integration_tests/invalid_config.json"
         status: "failed"
   discovery:
     tests:
       - config_path: "secrets/config.json"
         backward_compatibility_tests_config:
-          disable_for_version: "0.1.5"
+          disable_for_version: "0.1.6"
   basic_read:
     tests:
       - config_path: "secrets/config.json"
         configured_catalog_path: "integration_tests/configured_catalog.json"
         empty_streams:
-          - name: reports
+          - name: templates
+  incremental:
+    bypass_reason: "This connector does not implement incremental sync"
   full_refresh:
     tests:
       - config_path: "secrets/config.json"

airbyte-integrations/connectors/source-retently/acceptance-test-docker.sh

@@ -1,2 +1,3 @@
 #!/usr/bin/env sh
+
 source "$(git rev-parse --show-toplevel)/airbyte-integrations/bases/connector-acceptance-test/acceptance-test-docker.sh"

airbyte-integrations/connectors/source-retently/integration_tests/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-integrations/connectors/source-retently/integration_tests/configured_catalog.json

@@ -4,7 +4,7 @@
       "stream": {
         "name": "campaigns",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -16,7 +16,7 @@
       "stream": {
         "name": "reports",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -28,7 +28,7 @@
       "stream": {
         "name": "customers",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -40,7 +40,7 @@
       "stream": {
         "name": "nps",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -52,7 +52,7 @@
       "stream": {
         "name": "feedback",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -64,7 +64,7 @@
       "stream": {
         "name": "outbox",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -76,7 +76,7 @@
       "stream": {
         "name": "companies",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]
@@ -88,7 +88,7 @@
       "stream": {
         "name": "templates",
         "json_schema": {
-          "$schema": "http://json-schema.org/draft-04/schema#",
+          "$schema": "http://json-schema.org/draft-07/schema#",
           "type": "object"
         },
         "supported_sync_modes": ["full_refresh"]

airbyte-integrations/connectors/source-retently/integration_tests/invalid_config.json

@@ -1,3 +1,5 @@
 {
-  "api_key": "invalid-key"
-}
+  "credentials":{
+      "api_key":"invalid_api_key"
+  }
+}

airbyte-integrations/connectors/source-retently/integration_tests/sample_config.json

@@ -1,3 +1,5 @@
 {
-  "api_key": "<API-KEY>"
-}
+  "credentials":{
+      "api_key":"api_key"
+  }
+}

airbyte-integrations/connectors/source-retently/metadata.yaml

@@ -1,24 +1,28 @@
 data:
+  allowedHosts:
+    hosts:
+      - "*" # Please change to the hostname of the source.
+  registries:
+    oss:
+      enabled: true
+    cloud:
+      enabled: true
   connectorSubtype: api
   connectorType: source
   definitionId: db04ecd1-42e7-4115-9cec-95812905c626
-  dockerImageTag: 0.1.6
+  dockerImageTag: 1.0.0
   dockerRepository: airbyte/source-retently
   githubIssueLabel: source-retently
   icon: retently.svg
   license: MIT
   name: Retently
-  registries:
-    cloud:
-      enabled: true
-    oss:
-      enabled: true
   releaseStage: alpha
   documentationUrl: https://docs.airbyte.com/integrations/sources/retently
   tags:
-    - language:python
-  ab_internal:
-    sl: 100
-    ql: 200
-  supportLevel: community
+    - language:low-code
+  releases:
+    breakingChanges:
+      1.0.0:
+        message: "Version 1.0.0 was released with the low code version"
+        upgradeDeadline: "2023-08-31"
 metadataSpecVersion: "1.0"