FEAT: Improve extensions quality

doc/source/User_guide/extensions.rst

@@ -20,7 +20,7 @@ Project extensions
 ~~~~~~~~~~~~~~~~~~
 
 Pre-installed extensions are available at project level so they are available for all AEDT applications.
-They are small automated workflow with a simple UI.
+They are small automated workflows with a simple UI.
 
 .. grid:: 2
 
@@ -60,7 +60,7 @@ HFSS 3D Layout extensions
 ~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Pre-installed extensions are available at HFSS 3D Layout level.
-They are small automated workflow with a simple UI.
+They are small automated workflows with a simple UI.
 
 .. grid:: 2
 
@@ -79,12 +79,40 @@ They are small automated workflow with a simple UI.
 
             Generate arbitrary wave ports in HFSS.
 
+   .. grid-item-card:: Push excitation from file
+            :link: pyaedt_extensions_doc/hfss3dlayout/push_excitation
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Edit a source from file data in HFSS 3D Layout.
+
+   .. grid-item-card:: Cutout
+            :link: pyaedt_extensions_doc/hfss3dlayout/cutout
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Advanced layout cutout.
+
+   .. grid-item-card:: Export layout
+            :link: pyaedt_extensions_doc/hfss3dlayout/export_layout
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Export layout.
+
+   .. grid-item-card:: Export to 3D
+            :link: pyaedt_extensions_doc/hfss3dlayout/export_3d
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Export layout to 3D.
+
 
 HFSS extensions
 ~~~~~~~~~~~~~~~
 
 Pre-installed extensions are available at HFSS level.
-They are small automated workflow with a simple UI.
+They are small automated workflows with a simple UI.
 
 .. grid:: 2
 
@@ -95,12 +123,19 @@ They are small automated workflow with a simple UI.
 
             Design a choke and import it in HFSS.
 
+   .. grid-item-card:: Push excitation from file
+            :link: pyaedt_extensions_doc/hfss/push_excitation
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Edit a source from file data in HFSS.
+
 
 Icepak extensions
 ~~~~~~~~~~~~~~~~~
 
 Pre-installed extensions are available at Icepak level.
-They are small automated workflow with a simple UI.
+They are small automated workflows with a simple UI.
 
 .. grid:: 2
 
@@ -112,6 +147,38 @@ They are small automated workflow with a simple UI.
             Import a CSV file containing sources layout and power dissipation information.
 
 
+Circuit extensions
+~~~~~~~~~~~~~~~~~~
+
+Pre-installed extensions are available at Circuit level.
+They are small automated workflows with a simple UI.
+
+.. grid:: 2
+
+   .. grid-item-card:: Schematic import
+            :link: pyaedt_extensions_doc/circuit/import_schematic
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Import different schematic files (.asc, .sp, .cir, .qcv) into Circuit.
+
+
+Twin Builder extensions
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Pre-installed extensions are available at Twin Builder level.
+They are small automated workflows with a simple UI.
+
+.. grid:: 2
+
+   .. grid-item-card:: Convert to Circuit
+            :link: pyaedt_extensions_doc/twinbuilder/convert_to_circuit
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Convert Twin Builder design to Circuit.
+
+
 .. toctree::
    :hidden:
    :maxdepth: 1
@@ -120,6 +187,8 @@ They are small automated workflow with a simple UI.
    pyaedt_extensions_doc/hfss3dlayout/index
    pyaedt_extensions_doc/hfss/index
    pyaedt_extensions_doc/icepak/index
+   pyaedt_extensions_doc/circuit/index
+   pyaedt_extensions_doc/twinbuilder/index
 
 
 Open source toolkits
@@ -180,7 +249,7 @@ The Python script requires a common initial part to define the port and the vers
     active_project = app.active_project()
     active_design = app.active_design(active_project)
 
-    # no need to hardcode you application but get_pyaedt_app will detect it for you
+    # no need to hardcode you application but get_pyaedt_app detects it for you
     aedtapp = ansys.aedt.core.get_pyaedt_app(design_name=active_design.GetName(), desktop=app)
 
     # your workflow

doc/source/User_guide/pyaedt_extensions_doc/circuit/import_schematic.rst

@@ -0,0 +1,58 @@
+Import schematic
+================
+
+Import different schematic files (.asc, .sp, .cir, .qcv) into Circuit.
+
+The extension provides a graphical user interface for configuration,
+or it can be used in batch mode via command line arguments.
+
+The following image shows the extension user interface:
+
+.. image:: ../../../_static/extensions/import_schematic_ui.png
+  :width: 800
+  :alt: Import schematic UI
+
+
+Using the extension
+--------------------
+
+1. Open the **Automation** tab in the Circuit interface.
+2. Locate and click the **Import Schematic** icon under the Extension Manager.
+3. In the user interface:
+   - Browse for a supported schematic file.
+   - Select the file and ensure its path appears in the text field.
+   - Click **Import** to load the schematic into Circuit.
+4. Toggle between light and dark themes using the button in the bottom-right corner.
+
+
+Command line
+------------
+
+You can also launch the extension directly from the terminal.
+
+The script accepts the following argument:
+
+- ``**asc_file**``:
+  Specifies the path to the schematic file to be imported.
+  The file must exist and should have one of the supported extensions.
+  Example: `"C:/schematics/example.asc"`
+
+Use the following command syntax:
+
+.. toctree::
+   :maxdepth: 2
+
+   ../commandline
+
+
+Supported file types
+--------------------
+
+The following schematic file formats are supported:
+- **.asc**: Schematic files
+- **.sp**: SPICE netlist files
+- **.cir**: Circuit schematic files
+- **.qcv**: QCV-specific files
+
+Each file type can be imported using the user interface or through the command line.
+Ensure that the file exists at the specified path and is properly formatted.

doc/source/User_guide/pyaedt_extensions_doc/circuit/index.rst

@@ -0,0 +1,11 @@
+Circuit extensions
+==================
+
+.. grid:: 2
+
+   .. grid-item-card:: Import schematic
+            :link: import_schematic
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Import different schematic files (.asc, .sp, .cir, .qcv) into Circuit.

doc/source/User_guide/pyaedt_extensions_doc/hfss/choke_designer.rst

@@ -1,9 +1,11 @@
 Choke designer
 ==============
 
-You can design a choke in HFSS.
+The **Choke designer** extension enables users to create and customize choke configurations and export the generated
+geometry to HFSS.
 
-You can access the extension from the icon created on the **Automation** tab using the Extension Manager.
+The extension provides a graphical user interface for configuration,
+or it can be used in batch mode via command line arguments.
 
 The following image shows the extension user interface:
 
@@ -12,14 +14,59 @@ The following image shows the extension user interface:
   :alt: Choke Designer UI
 
 
-The available argument is: ``choke_config``.
+Supported features
+-------------------
 
-The ``choke_config`` parameter is a dictionary with choke configuration file content. See more information: :ref:`choke-file`.
+The extension supports:
 
-You can also launch the extension user interface from the terminal. An example can be found here:
+- Configuring choke parameters including core dimensions, windings, layers, and material properties.
+- Exporting designs to HFSS.
+- Saving and loading configurations as JSON files.
+- Switching between light and dark themes in the user interface.
 
 
+Using the extension
+--------------------
+
+1. Open the **Automation** tab in the HFSS interface.
+2. Locate and click the **Choke designer** icon under the Extension Manager.
+3. In the user interface:
+   - Adjust configuration parameters in the **Left panel** using radio buttons for options such as number of windings and layer types.
+   - Modify detailed parameters for the core and windings in the **Right Panel** under respective tabs.
+   - Use the buttons at the bottom to:
+     - Save the current configuration as a `.json` file.
+     - Load an existing configuration file.
+     - Toggle between light and dark themes.
+4. To export to HFSS, click **Export to HFSS**. Ensure that parameters are valid before exporting.
+5. Adjust the settings for light or dark theme using the toggle button in the bottom-right corner.
+
+
+Command line
+------------
+
+The extension can also be used directly via the command line for batch processing.
+
+
+Use the following syntax to run the extension:
+
 .. toctree::
    :maxdepth: 2
 
-   ../commandline
+   ../commandline
+
+
+Example configuration file
+--------------------------
+
+Here is an example of a choke configuration in JSON format: :ref:`choke-file`.
+
+Ensure the parameters are valid before importing.
+
+
+Validation rules
+----------------
+
+- The outer radius must be greater than the inner radius for the core and windings.
+- Heights and wire diameters must be positive.
+
+The user interface provides detailed feedback on validation errors in the form of message boxes.

doc/source/User_guide/pyaedt_extensions_doc/hfss/index.rst

@@ -9,3 +9,10 @@ HFSS extensions
             :margin: 2 2 0 0
 
             Design a choke and import it in HFSS.
+
+   .. grid-item-card:: Push excitation from file
+            :link: push_excitation
+            :link-type: doc
+            :margin: 2 2 0 0
+
+            Edit a source from file data in HFSS.

doc/source/User_guide/pyaedt_extensions_doc/hfss/push_excitation.rst

@@ -0,0 +1,55 @@
+Push excitation from file
+=========================
+
+The **push excitation from file** extension allows users to assign a time-domain excitation to a port in an HFSS design
+by importing data from a file.
+
+The extension provides a graphical user interface (GUI) for configuration,
+or it can be used in batch mode via command line arguments.
+
+Features
+--------
+
+- Automatically detects and lists available ports in the active HFSS design.
+- Allows users to browse and select a time-domain excitation file.
+- Supports both light and dark themes for the GUI.
+- Assigns excitations programmatically using a batch-mode interface.
+- Validates file paths and port selections to ensure proper configuration.
+
+The following image shows the extension user interface:
+
+.. image:: ../../../_static/extensions/push_excitation.png
+  :width: 800
+  :alt: Push excitation UI
+
+
+Using the extension
+--------------------
+
+1. Open the **Automation** tab in the HFSS interface.
+2. Locate and click the **push excitation from file** icon under the Extension Manager.
+3. The main window displays the following elements:
+   - **Port selection**: A dropdown menu to select the desired port from the HFSS design.
+   - **File browser**: A text box and button to select the excitation file.
+   - **Push excitation button**: A button to assign the excitation to the selected port.
+   - **Theme toggle**: A button to switch between light and dark themes.
+3. Click **Push excitation** after selecting the port and file to apply the configuration.
+
+
+Command line
+------------
+
+The extension can also be used directly via the command line for batch processing.
+
+Supported arguments include:
+
+- **file path**: Path to the excitation file.
+- **choice**: Name of the port to assign the excitation.
+- **is batch**: Boolean flag to enable batch mode.
+
+Use the following syntax to run the extension:
+
+.. toctree::
+   :maxdepth: 2
+
+   ../commandline