don't force PTI on AMD users #27

deathtrip · 2020-02-20T23:29:30Z

Currently the kernel-hardened command line forces pti=on on all users with no way to disable it.
As the performance impact can be significant, and the benefit for AMD users is negligible, it would be wise to not enable it by default.
AMD users who want it anyway can enable it manually, and for Intel it's on anyway.

XHDR · 2020-02-21T03:15:08Z

Given that the "default" command line is whatever CONFIG_CMDLINE is set to at build time, that's more of an issue with whatever compiled package you're using, no? Still, sure, currently on Arch the pti option is set to "on" by default, but as long as the kernel isn't build with CONFIG_CMDLINE_OVERRIDE enabled, it should be possible to override that by supplying an additional option to the bootloader, like pti=off.

Checking the output of $ cat /sys/devices/system/cpu/vulnerabilities/meltdown should then tell if the mitigation is enabled or not.

deathtrip · 2020-02-21T10:36:02Z

I tried adding nopti to the grub command line, and had both pti=on and nopti in the kernel command line. Then checked PTI status, and it was still enabled.
So you cannot override it because the option compiled into the kernel seems to take precedence.

The git link you gave is for the hardened kernel, not the stock one.
On the stock kernel it's disabled, as linux by default excludes AMD users from PTI.

cat /sys/devices/system/cpu/vulnerabilities/meltdown gives me a Not affected , regardless if PTI is on or off.

anthraxx · 2020-02-21T10:50:30Z

This is a downstream choice in the Kconfig file, please report it to the distros bug tracker.

madaidan · 2020-02-21T18:26:41Z

PTI isn't just to mitigate meltdown. It also prevents many KASLR bypasses which AMD is affected by.

deathtrip · 2020-02-21T21:37:15Z

But the performance impact can be pretty big, so it's better to let the user decide if they want it.
Anyway, i'm gonna file an issue in the arch bug tracker.

madaidan · 2020-02-22T18:05:52Z

linux-hardened isn't a performance-oriented kernel. It's focused on security. Plenty of other hardening options linux-hardened enables has large performance impacts too.

[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 #32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 #22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 #23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 #24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 #27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 #28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 #29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 #30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 #31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 #32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 #33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 #34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 340b940 ] If cm_create_timewait_info() fails, the timewait_info pointer will contain an error value and will be used in cm_remove_remote() later. general protection fault, probably for non-canonical address 0xdffffc0000000024: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0×0000000000000120-0×0000000000000127] CPU: 2 PID: 12446 Comm: syz-executor.3 Not tainted 5.10.0-rc5-5d4c0742a60e #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:cm_remove_remote.isra.0+0x24/0×170 drivers/infiniband/core/cm.c:978 Code: 84 00 00 00 00 00 41 54 55 53 48 89 fb 48 8d ab 2d 01 00 00 e8 7d bf 4b fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <0f> b6 04 02 48 89 ea 83 e2 07 38 d0 7f 08 84 c0 0f 85 fc 00 00 00 RSP: 0018:ffff888013127918 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: ffffc9000a18b000 RDX: 0000000000000024 RSI: ffffffff82edc573 RDI: fffffffffffffff4 RBP: 0000000000000121 R08: 0000000000000001 R09: ffffed1002624f1d R10: 0000000000000003 R11: ffffed1002624f1c R12: ffff888107760c70 R13: ffff888107760c40 R14: fffffffffffffff4 R15: ffff888107760c9c FS: 00007fe1ffcc1700(0000) GS:ffff88811a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ff21000 CR3: 000000010f504001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: cm_destroy_id+0x189/0×15b0 drivers/infiniband/core/cm.c:1155 cma_connect_ib drivers/infiniband/core/cma.c:4029 [inline] rdma_connect_locked+0x1100/0×17c0 drivers/infiniband/core/cma.c:4107 rdma_connect+0x2a/0×40 drivers/infiniband/core/cma.c:4140 ucma_connect+0x277/0×340 drivers/infiniband/core/ucma.c:1069 ucma_write+0x236/0×2f0 drivers/infiniband/core/ucma.c:1724 vfs_write+0x220/0×830 fs/read_write.c:603 ksys_write+0x1df/0×240 fs/read_write.c:658 do_syscall_64+0x33/0×40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a977049 ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20201204064205.145795-1-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Reported-by: Amit Matityahu <mitm@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>

Minimal selftest which implements a small BPF policy program to the connect(2) hook which rejects TCP connection requests to port 60123 with EPERM. This is being attached to a non-root cgroup v2 path. The test asserts that this works under cgroup v2-only and under a mixed cgroup v1/v2 environment where net_classid is set in the former case. Before fix: # ./test_progs -t cgroup_v1v2 test_cgroup_v1v2:PASS:server_fd 0 nsec test_cgroup_v1v2:PASS:client_fd 0 nsec test_cgroup_v1v2:PASS:cgroup_fd 0 nsec test_cgroup_v1v2:PASS:server_fd 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec run_test:PASS:join_classid 0 nsec (network_helpers.c:219: errno: None) Unexpected success to connect to server test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 0) #27 cgroup_v1v2:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED After fix: # ./test_progs -t cgroup_v1v2 #27 cgroup_v1v2:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210913230759.2313-3-daniel@iogearbox.net

[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20211021114132.8196-2-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 64ea2d0 ] The change of devlink_alloc() to accept device makes sure that device is fully initialized and device_register() does nothing except allowing users to use that devlink instance. Such change ensures that no user input will be usable till that point and it eliminates the need to worry about internal locking as long as devlink_register is called last since all accesses to the devlink are during initialization. This change fixes the following lockdep warning. ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ #27 Not tainted ------------------------------------------------------ devlink/265 is trying to acquire lock: ffff8880133c2bc0 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_unload_one+0x1e/0xa0 [mlx5_core] but task is already holding lock: ffffffff8362b468 (devlink_mutex){+.+.}-{3:3}, at: devlink_nl_pre_doit+0x2b/0x8d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (devlink_mutex){+.+.}-{3:3}: __mutex_lock+0x149/0x1310 devlink_register+0xe7/0x280 mlx5_devlink_register+0x118/0x480 [mlx5_core] mlx5_init_one+0x34b/0x440 [mlx5_core] probe_one+0x480/0x6e0 [mlx5_core] pci_device_probe+0x2a0/0x4a0 really_probe+0x1cb/0xba0 __driver_probe_device+0x18f/0x470 driver_probe_device+0x49/0x120 __driver_attach+0x1ce/0x400 bus_for_each_dev+0x11e/0x1a0 bus_add_driver+0x309/0x570 driver_register+0x20f/0x390 0xffffffffa04a0062 do_one_initcall+0xd5/0x400 do_init_module+0x1c8/0x760 load_module+0x7d9d/0xa4b0 __do_sys_finit_module+0x118/0x1a0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&dev->intf_state_mutex){+.+.}-{3:3}: __lock_acquire+0x2999/0x5a40 lock_acquire+0x1a9/0x4a0 __mutex_lock+0x149/0x1310 mlx5_unload_one+0x1e/0xa0 [mlx5_core] mlx5_devlink_reload_down+0x185/0x2b0 [mlx5_core] devlink_reload+0x1f2/0x640 devlink_nl_cmd_reload+0x6c3/0x10d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x27f/0x4a0 netlink_rcv_skb+0x11e/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 netlink_sendmsg+0x6fb/0xbe0 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x192/0x240 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(devlink_mutex); lock(&dev->intf_state_mutex); lock(devlink_mutex); lock(&dev->intf_state_mutex); *** DEADLOCK *** 3 locks held by devlink/265: #0: ffffffff836371d0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff83637288 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x31a/0x4a0 #2: ffffffff8362b468 (devlink_mutex){+.+.}-{3:3}, at: devlink_nl_pre_doit+0x2b/0x8d0 stack backtrace: CPU: 0 PID: 265 Comm: devlink Not tainted 5.14.0-rc2+ #27 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x45/0x59 check_noncircular+0x268/0x310 ? print_circular_bug+0x460/0x460 ? __kernel_text_address+0xe/0x30 ? alloc_chain_hlocks+0x1e6/0x5a0 __lock_acquire+0x2999/0x5a40 ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? add_lock_to_list.constprop.0+0x6c/0x530 lock_acquire+0x1a9/0x4a0 ? mlx5_unload_one+0x1e/0xa0 [mlx5_core] ? lock_release+0x6c0/0x6c0 ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? lock_is_held_type+0x98/0x110 __mutex_lock+0x149/0x1310 ? mlx5_unload_one+0x1e/0xa0 [mlx5_core] ? lock_is_held_type+0x98/0x110 ? mlx5_unload_one+0x1e/0xa0 [mlx5_core] ? find_held_lock+0x2d/0x110 ? mutex_lock_io_nested+0x1160/0x1160 ? mlx5_lag_is_active+0x72/0x90 [mlx5_core] ? lock_downgrade+0x6d0/0x6d0 ? do_raw_spin_lock+0x12e/0x270 ? rwlock_bug.part.0+0x90/0x90 ? mlx5_unload_one+0x1e/0xa0 [mlx5_core] mlx5_unload_one+0x1e/0xa0 [mlx5_core] mlx5_devlink_reload_down+0x185/0x2b0 [mlx5_core] ? netlink_broadcast_filtered+0x308/0xac0 ? mlx5_devlink_info_get+0x1f0/0x1f0 [mlx5_core] ? __build_skb_around+0x110/0x2b0 ? __alloc_skb+0x113/0x2b0 devlink_reload+0x1f2/0x640 ? devlink_unregister+0x1e0/0x1e0 ? security_capable+0x51/0x90 devlink_nl_cmd_reload+0x6c3/0x10d0 ? devlink_nl_cmd_get_doit+0x1e0/0x1e0 ? devlink_nl_pre_doit+0x72/0x8d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 ? __lock_acquire+0x15e2/0x5a40 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? mutex_lock_io_nested+0x1160/0x1160 ? security_capable+0x51/0x90 genl_rcv_msg+0x27f/0x4a0 ? genl_get_cmd+0x3c0/0x3c0 ? lock_acquire+0x1a9/0x4a0 ? devlink_nl_cmd_get_doit+0x1e0/0x1e0 ? lock_release+0x6c0/0x6c0 netlink_rcv_skb+0x11e/0x340 ? genl_get_cmd+0x3c0/0x3c0 ? netlink_ack+0x930/0x930 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 ? netlink_attachskb+0x750/0x750 ? __alloc_skb+0x113/0x2b0 netlink_sendmsg+0x6fb/0xbe0 ? netlink_unicast+0x700/0x700 ? netlink_unicast+0x700/0x700 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x192/0x240 ? __x64_sys_getpeername+0xb0/0xb0 ? do_sys_openat2+0x10a/0x370 ? down_write_nested+0x150/0x150 ? do_user_addr_fault+0x215/0xd50 ? __x64_sys_openat+0x11f/0x1d0 ? __x64_sys_open+0x1a0/0x1a0 __x64_sys_sendto+0xdc/0x1b0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f50b50b6b3a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007fff6c0d3f38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f50b50b6b3a RDX: 0000000000000038 RSI: 000055763ac08440 RDI: 0000000000000003 RBP: 000055763ac08410 R08: 00007f50b5192200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 000055763ac08410 R15: 000055763ac08440 mlx5_core 0000:00:09.0: firmware version: 4.8.9999 mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link) mlx5_core 0000:00:09.0 eth1: Link up Fixes: a6f3b62 ("net/mlx5: Move devlink registration before interfaces load") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit cefa91b upstream. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, if next_offset is greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE bytes increasing actions_len by req_size. This can then lead to an OOB write access, especially when further actions need to be copied. Fix it by rearranging the flow action size check. KASAN splat below: ================================================================== BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch] Write of size 65360 at addr ffff888147e4001c by task handler15/836 CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27 ... Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_report+0xb5/0x130 ? reserve_sfa_size+0x1ba/0x380 [openvswitch] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 reserve_sfa_size+0x1ba/0x380 [openvswitch] __add_action+0x24/0x120 [openvswitch] ovs_nla_add_action+0xe/0x20 [openvswitch] ovs_ct_copy_action+0x29d/0x1130 [openvswitch] ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x56/0xa0 ? create_prof_cpu_mask+0x20/0x20 ? ovs_ct_verify+0xf0/0xf0 [openvswitch] ? prep_compound_page+0x198/0x2a0 ? __kasan_check_byte+0x10/0x40 ? kasan_unpoison+0x40/0x70 ? ksize+0x44/0x60 ? reserve_sfa_size+0x75/0x380 [openvswitch] __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch] ? __zone_watermark_ok+0x420/0x420 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch] ? __alloc_pages+0x1a9/0x3e0 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0 ? unwind_next_frame+0x991/0x1e40 ? __mod_node_page_state+0x99/0x120 ? __mod_lruvec_page_state+0x2e3/0x470 ? __kasan_kmalloc_large+0x90/0xe0 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch] ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch] ... Cc: stable@vger.kernel.org Fixes: f28cd2a ("openvswitch: fix flow actions reallocation") Signed-off-by: Paolo Valerio <pvalerio@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 49df342 ] when get fiemap starting from MAX_LFS_FILESIZE, (maxbytes - *len) < start will always true , then *len set zero. because of start offset is beyond file size, for erofs filesystem it will always return iomap.length with zero,iomap iterate will enter infinite loop. it is necessary cover this corner case to avoid this situation. ------------[ cut here ]------------ WARNING: CPU: 7 PID: 905 at fs/iomap/iter.c:35 iomap_iter+0x97f/0xc70 Modules linked in: xfs erofs CPU: 7 PID: 905 Comm: iomap Tainted: G W 5.17.0-rc8 #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:iomap_iter+0x97f/0xc70 Code: 85 a1 fc ff ff e8 71 be 9c ff 0f 1f 44 00 00 e9 92 fc ff ff e8 62 be 9c ff 0f 0b b8 fb ff ff ff e9 fc f8 ff ff e8 51 be 9c ff <0f> 0b e9 2b fc ff ff e8 45 be 9c ff 0f 0b e9 e1 fb ff ff e8 39 be RSP: 0018:ffff888060a37ab0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888060a37bb0 RCX: 0000000000000000 RDX: ffff88807e19a900 RSI: ffffffff81a7da7f RDI: ffff888060a37be0 RBP: 7fffffffffffffff R08: 0000000000000000 R09: ffff888060a37c20 R10: ffff888060a37c67 R11: ffffed100c146f8c R12: 7fffffffffffffff R13: 0000000000000000 R14: ffff888060a37bd8 R15: ffff888060a37c20 FS: 00007fd3cca01540(0000) GS:ffff888108780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010820 CR3: 0000000054b92000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> iomap_fiemap+0x1c9/0x2f0 erofs_fiemap+0x64/0x90 [erofs] do_vfs_ioctl+0x40d/0x12e0 __x64_sys_ioctl+0xaa/0x1c0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- watchdog: BUG: soft lockup - CPU#7 stuck for 26s! [iomap:905] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guo Xuenan <guoxuenan@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [djwong: fix some typos] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0b0747d ] The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f9a4300 upstream. [ This backport includes ab5e5c0 ("netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path") ] __nft_release_hooks() is called from pre_netns exit path which unregisters the hooks, then the NETDEV_UNREGISTER event is triggered which unregisters the hooks again. [ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270 [...] [ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27 [ 565.253682] Workqueue: netns cleanup_net [ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270 [...] [ 565.297120] Call Trace: [ 565.300900] <TASK> [ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables] [ 565.308518] raw_notifier_call_chain+0x63/0x80 [ 565.312386] unregister_netdevice_many+0x54f/0xb50 Unregister and destroy netdev hook from netns pre_exit via kfree_rcu so the NETDEV_UNREGISTER path see unregistered hooks. Fixes: 767d121 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f9a4300 upstream. __nft_release_hooks() is called from pre_netns exit path which unregisters the hooks, then the NETDEV_UNREGISTER event is triggered which unregisters the hooks again. [ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270 [...] [ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27 [ 565.253682] Workqueue: netns cleanup_net [ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270 [...] [ 565.297120] Call Trace: [ 565.300900] <TASK> [ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables] [ 565.308518] raw_notifier_call_chain+0x63/0x80 [ 565.312386] unregister_netdevice_many+0x54f/0xb50 Unregister and destroy netdev hook from netns pre_exit via kfree_rcu so the NETDEV_UNREGISTER path see unregistered hooks. Fixes: 767d121 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b7cc4ff upstream. It appears the client object tree has no locking unless I've missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof kvm snd_sof_utils snd_soc_core snd_hda_codec_realtek libarc4 snd_hda_codec_generic snd_compress snd_hda_ext_core vfat fat snd_hda_intel snd_intel_dspcfg irqbypass iwlwifi snd_hda_codec snd_hwdep snd_hda_core btusb btrtl mei_hdcp iTCO_wdt rapl mei_pxp btintel snd_seq iTCO_vendor_support btbcm snd_seq_device intel_cstate bluetooth snd_pcm cfg80211 intel_wmi_thunderbolt wmi_bmof intel_uncore snd_timer mei_me snd ecdh_generic i2c_i801 [ 4562.100541] ecc mei i2c_smbus soundcore rfkill intel_pch_thermal acpi_pad zram nouveau drm_ttm_helper ttm gpu_sched i2c_algo_bit drm_gpuvm drm_exec mxm_wmi drm_display_helper drm_kms_helper drm crct10dif_pclmul crc32_pclmul nvme e1000e crc32c_intel nvme_core ghash_clmulni_intel video wmi pinctrl_cannonlake ip6_tables ip_tables fuse [ 4562.100616] ---[ end trace 0000000000000000 ]--- Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fff1386 upstream. Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. Cc: <stable@vger.kernel.org> Fixes: be55287 ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. Cc: <stable@vger.kernel.org> Fixes: be55287 ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com

[ Upstream commit 8987515 ] When request_irq() fails, error path calls vp_del_vqs(). There, as vq is present in the list, free_irq() is called for the same vector. That causes following splat: [ 0.414355] Trying to free already-free IRQ 27 [ 0.414403] WARNING: CPU: 1 PID: 1 at kernel/irq/manage.c:1899 free_irq+0x1a1/0x2d0 [ 0.414510] Modules linked in: [ 0.414540] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc4+ #27 [ 0.414540] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 [ 0.414540] RIP: 0010:free_irq+0x1a1/0x2d0 [ 0.414540] Code: 1e 00 48 83 c4 08 48 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 90 8b 74 24 04 48 c7 c7 98 80 6c b1 e8 00 c9 f7 ff 90 <0f> 0b 90 90 48 89 ee 4c 89 ef e8 e0 20 b8 00 49 8b 47 40 48 8b 40 [ 0.414540] RSP: 0000:ffffb71480013ae0 EFLAGS: 00010086 [ 0.414540] RAX: 0000000000000000 RBX: ffffa099c2722000 RCX: 0000000000000000 [ 0.414540] RDX: 0000000000000000 RSI: ffffb71480013998 RDI: 0000000000000001 [ 0.414540] RBP: 0000000000000246 R08: 00000000ffffdfff R09: 0000000000000001 [ 0.414540] R10: 00000000ffffdfff R11: ffffffffb18729c0 R12: ffffa099c1c91760 [ 0.414540] R13: ffffa099c1c916a4 R14: ffffa099c1d2f200 R15: ffffa099c1c91600 [ 0.414540] FS: 0000000000000000(0000) GS:ffffa099fec40000(0000) knlGS:0000000000000000 [ 0.414540] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.414540] CR2: 0000000000000000 CR3: 0000000008e3e001 CR4: 0000000000370ef0 [ 0.414540] Call Trace: [ 0.414540] <TASK> [ 0.414540] ? __warn+0x80/0x120 [ 0.414540] ? free_irq+0x1a1/0x2d0 [ 0.414540] ? report_bug+0x164/0x190 [ 0.414540] ? handle_bug+0x3b/0x70 [ 0.414540] ? exc_invalid_op+0x17/0x70 [ 0.414540] ? asm_exc_invalid_op+0x1a/0x20 [ 0.414540] ? free_irq+0x1a1/0x2d0 [ 0.414540] vp_del_vqs+0xc1/0x220 [ 0.414540] vp_find_vqs_msix+0x305/0x470 [ 0.414540] vp_find_vqs+0x3e/0x1a0 [ 0.414540] vp_modern_find_vqs+0x1b/0x70 [ 0.414540] init_vqs+0x387/0x600 [ 0.414540] virtnet_probe+0x50a/0xc80 [ 0.414540] virtio_dev_probe+0x1e0/0x2b0 [ 0.414540] really_probe+0xc0/0x2c0 [ 0.414540] ? __pfx___driver_attach+0x10/0x10 [ 0.414540] __driver_probe_device+0x73/0x120 [ 0.414540] driver_probe_device+0x1f/0xe0 [ 0.414540] __driver_attach+0x88/0x180 [ 0.414540] bus_for_each_dev+0x85/0xd0 [ 0.414540] bus_add_driver+0xec/0x1f0 [ 0.414540] driver_register+0x59/0x100 [ 0.414540] ? __pfx_virtio_net_driver_init+0x10/0x10 [ 0.414540] virtio_net_driver_init+0x90/0xb0 [ 0.414540] do_one_initcall+0x58/0x230 [ 0.414540] kernel_init_freeable+0x1a3/0x2d0 [ 0.414540] ? __pfx_kernel_init+0x10/0x10 [ 0.414540] kernel_init+0x1a/0x1c0 [ 0.414540] ret_from_fork+0x31/0x50 [ 0.414540] ? __pfx_kernel_init+0x10/0x10 [ 0.414540] ret_from_fork_asm+0x1a/0x30 [ 0.414540] </TASK> Fix this by calling deleting the current vq when request_irq() fails. Fixes: 0b0f9dc ("Revert "virtio_pci: use shared interrupts for virtqueues"") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240426150845.3999481-1-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f9a4300 upstream. __nft_release_hooks() is called from pre_netns exit path which unregisters the hooks, then the NETDEV_UNREGISTER event is triggered which unregisters the hooks again. [ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270 [...] [ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27 [ 565.253682] Workqueue: netns cleanup_net [ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270 [...] [ 565.297120] Call Trace: [ 565.300900] <TASK> [ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables] [ 565.308518] raw_notifier_call_chain+0x63/0x80 [ 565.312386] unregister_netdevice_many+0x54f/0xb50 Unregister and destroy netdev hook from netns pre_exit via kfree_rcu so the NETDEV_UNREGISTER path see unregistered hooks. Fixes: 767d121 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8987515 ] When request_irq() fails, error path calls vp_del_vqs(). There, as vq is present in the list, free_irq() is called for the same vector. That causes following splat: [ 0.414355] Trying to free already-free IRQ 27 [ 0.414403] WARNING: CPU: 1 PID: 1 at kernel/irq/manage.c:1899 free_irq+0x1a1/0x2d0 [ 0.414510] Modules linked in: [ 0.414540] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc4+ #27 [ 0.414540] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 [ 0.414540] RIP: 0010:free_irq+0x1a1/0x2d0 [ 0.414540] Code: 1e 00 48 83 c4 08 48 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 90 8b 74 24 04 48 c7 c7 98 80 6c b1 e8 00 c9 f7 ff 90 <0f> 0b 90 90 48 89 ee 4c 89 ef e8 e0 20 b8 00 49 8b 47 40 48 8b 40 [ 0.414540] RSP: 0000:ffffb71480013ae0 EFLAGS: 00010086 [ 0.414540] RAX: 0000000000000000 RBX: ffffa099c2722000 RCX: 0000000000000000 [ 0.414540] RDX: 0000000000000000 RSI: ffffb71480013998 RDI: 0000000000000001 [ 0.414540] RBP: 0000000000000246 R08: 00000000ffffdfff R09: 0000000000000001 [ 0.414540] R10: 00000000ffffdfff R11: ffffffffb18729c0 R12: ffffa099c1c91760 [ 0.414540] R13: ffffa099c1c916a4 R14: ffffa099c1d2f200 R15: ffffa099c1c91600 [ 0.414540] FS: 0000000000000000(0000) GS:ffffa099fec40000(0000) knlGS:0000000000000000 [ 0.414540] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.414540] CR2: 0000000000000000 CR3: 0000000008e3e001 CR4: 0000000000370ef0 [ 0.414540] Call Trace: [ 0.414540] <TASK> [ 0.414540] ? __warn+0x80/0x120 [ 0.414540] ? free_irq+0x1a1/0x2d0 [ 0.414540] ? report_bug+0x164/0x190 [ 0.414540] ? handle_bug+0x3b/0x70 [ 0.414540] ? exc_invalid_op+0x17/0x70 [ 0.414540] ? asm_exc_invalid_op+0x1a/0x20 [ 0.414540] ? free_irq+0x1a1/0x2d0 [ 0.414540] vp_del_vqs+0xc1/0x220 [ 0.414540] vp_find_vqs_msix+0x305/0x470 [ 0.414540] vp_find_vqs+0x3e/0x1a0 [ 0.414540] vp_modern_find_vqs+0x1b/0x70 [ 0.414540] init_vqs+0x387/0x600 [ 0.414540] virtnet_probe+0x50a/0xc80 [ 0.414540] virtio_dev_probe+0x1e0/0x2b0 [ 0.414540] really_probe+0xc0/0x2c0 [ 0.414540] ? __pfx___driver_attach+0x10/0x10 [ 0.414540] __driver_probe_device+0x73/0x120 [ 0.414540] driver_probe_device+0x1f/0xe0 [ 0.414540] __driver_attach+0x88/0x180 [ 0.414540] bus_for_each_dev+0x85/0xd0 [ 0.414540] bus_add_driver+0xec/0x1f0 [ 0.414540] driver_register+0x59/0x100 [ 0.414540] ? __pfx_virtio_net_driver_init+0x10/0x10 [ 0.414540] virtio_net_driver_init+0x90/0xb0 [ 0.414540] do_one_initcall+0x58/0x230 [ 0.414540] kernel_init_freeable+0x1a3/0x2d0 [ 0.414540] ? __pfx_kernel_init+0x10/0x10 [ 0.414540] kernel_init+0x1a/0x1c0 [ 0.414540] ret_from_fork+0x31/0x50 [ 0.414540] ? __pfx_kernel_init+0x10/0x10 [ 0.414540] ret_from_fork_asm+0x1a/0x30 [ 0.414540] </TASK> Fix this by calling deleting the current vq when request_irq() fails. Fixes: 0b0f9dc ("Revert "virtio_pci: use shared interrupts for virtqueues"") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Message-Id: <20240426150845.3999481-1-jiri@resnulli.us> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 6121258 upstream. Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ] Reported-by: Wesley Hershberger <wesley.hershberger@canonical.com> Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2081231 Reported-by: Stéphane Graber <stgraber@stgraber.org> Closes: https://lore.kernel.org/all/20240925143325.518508-1-aleksandr.mikhalitsyn@canonical.com/ Tested-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Tested-by: Eric Sandeen <sandeen@redhat.com> Fixes: 665d3e0 ("ext4: reduce unnecessary memory allocation in alloc_flex_gd()") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240927133329.1015041-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 60f07e2 ] We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, #28] 0x0000000000400c3c <+12>: strb w1, [sp, #27] 0x0000000000400c40 <+16>: str xzr, [sp, #40] 0x0000000000400c44 <+20>: str xzr, [sp, #48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // #1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, #28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, #60] 0x0000000000400c64 <+52>: ldr w0, [sp, #60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], #64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, #28] 0x0000000000400c3c <+12>: strb w1, [sp, #27] 0x0000000000400c40 <+16>: str xzr, [sp, #40] Signed-off-by: junhua huang <huang.junhua@zte.com.cn> Link: https://lore.kernel.org/r/202212021511106844809@zte.com.cn Signed-off-by: Will Deacon <will@kernel.org> Stable-dep-of: 13f8f1e ("arm64: probes: Fix uprobes for big-endian kernels") Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 6121258 upstream. Wesley reported an issue: ================================================================== EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks ------------[ cut here ]------------ kernel BUG at fs/ext4/resize.c:324! CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27 RIP: 0010:ext4_resize_fs+0x1212/0x12d0 Call Trace: __ext4_ioctl+0x4e0/0x1800 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0x99/0xd0 x64_sys_call+0x1206/0x20d0 do_syscall_64+0x72/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== While reviewing the patch, Honza found that when adjusting resize_bg in alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than flexbg_size. The reproduction of the problem requires the following: o_group = flexbg_size * 2 * n; o_size = (o_group + 1) * group_size; n_group: [o_group + flexbg_size, o_group + flexbg_size * 2) o_size = (n_group + 1) * group_size; Take n=0,flexbg_size=16 as an example: last:15 |o---------------|--------------n-| o_group:0 resize to n_group:30 The corresponding reproducer is: img=test.img rm -f $img truncate -s 600M $img mkfs.ext4 -F $img -b 1024 -G 16 8M dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 248M Delete the problematic plus 1 to fix the issue, and add a WARN_ON_ONCE() to prevent the issue from happening again. [ Note: another reproucer which this commit fixes is: img=test.img rm -f $img truncate -s 25MiB $img mkfs.ext4 -b 4096 -E nodiscard,lazy_itable_init=0,lazy_journal_init=0 $img truncate -s 3GiB $img dev=`losetup -f --show $img` mkdir -p /tmp/test mount $dev /tmp/test resize2fs $dev 3G umount $dev losetup -d $dev -- TYT ] Reported-by: Wesley Hershberger <wesley.hershberger@canonical.com> Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2081231 Reported-by: Stéphane Graber <stgraber@stgraber.org> Closes: https://lore.kernel.org/all/20240925143325.518508-1-aleksandr.mikhalitsyn@canonical.com/ Tested-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Tested-by: Eric Sandeen <sandeen@redhat.com> Fixes: 665d3e0 ("ext4: reduce unnecessary memory allocation in alloc_flex_gd()") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20240927133329.1015041-1-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 60f07e2 ] We use uprobe in aarch64_be, which we found the tracee task would exit due to SIGILL when we enable the uprobe trace. We can see the replace inst from uprobe is not correct in aarch big-endian. As in Armv8-A, instruction fetches are always treated as little-endian, we should treat the UPROBE_SWBP_INSN as little-endian。 The test case is as following。 bash-4.4# ./mqueue_test_aarchbe 1 1 2 1 10 > /dev/null & bash-4.4# cd /sys/kernel/debug/tracing/ bash-4.4# echo 'p:test /mqueue_test_aarchbe:0xc30 %x0 %x1' > uprobe_events bash-4.4# echo 1 > events/uprobes/enable bash-4.4# bash-4.4# ps PID TTY TIME CMD 140 ? 00:00:01 bash 237 ? 00:00:00 ps [1]+ Illegal instruction ./mqueue_test_aarchbe 1 1 2 1 100 > /dev/null which we debug use gdb as following: bash-4.4# gdb attach 155 (gdb) disassemble send Dump of assembler code for function send: 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, #28] 0x0000000000400c3c <+12>: strb w1, [sp, #27] 0x0000000000400c40 <+16>: str xzr, [sp, #40] 0x0000000000400c44 <+20>: str xzr, [sp, #48] 0x0000000000400c48 <+24>: add x0, sp, #0x1b 0x0000000000400c4c <+28>: mov w3, #0x0 // #0 0x0000000000400c50 <+32>: mov x2, #0x1 // #1 0x0000000000400c54 <+36>: mov x1, x0 0x0000000000400c58 <+40>: ldr w0, [sp, #28] 0x0000000000400c5c <+44>: bl 0x405e10 <mq_send> 0x0000000000400c60 <+48>: str w0, [sp, #60] 0x0000000000400c64 <+52>: ldr w0, [sp, #60] 0x0000000000400c68 <+56>: ldp x29, x30, [sp], #64 0x0000000000400c6c <+60>: ret End of assembler dump. (gdb) info b No breakpoints or watchpoints. (gdb) c Continuing. Program received signal SIGILL, Illegal instruction. 0x0000000000400c30 in send () (gdb) x/10x 0x400c30 0x400c30 <send>: 0xd42000a0 0xfd030091 0xe01f00b9 0xe16f0039 0x400c40 <send+16>: 0xff1700f9 0xff1b00f9 0xe06f0091 0x03008052 0x400c50 <send+32>: 0x220080d2 0xe10300aa (gdb) disassemble 0x400c30 Dump of assembler code for function send: => 0x0000000000400c30 <+0>: .inst 0xa00020d4 ; undefined 0x0000000000400c34 <+4>: mov x29, sp 0x0000000000400c38 <+8>: str w0, [sp, #28] 0x0000000000400c3c <+12>: strb w1, [sp, #27] 0x0000000000400c40 <+16>: str xzr, [sp, #40] Signed-off-by: junhua huang <huang.junhua@zte.com.cn> Link: https://lore.kernel.org/r/202212021511106844809@zte.com.cn Signed-off-by: Will Deacon <will@kernel.org> Stable-dep-of: 13f8f1e ("arm64: probes: Fix uprobes for big-endian kernels") Signed-off-by: Sasha Levin <sashal@kernel.org>

anthraxx closed this as completed Feb 21, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

don't force PTI on AMD users #27

don't force PTI on AMD users #27

deathtrip commented Feb 20, 2020

XHDR commented Feb 21, 2020

deathtrip commented Feb 21, 2020

anthraxx commented Feb 21, 2020

madaidan commented Feb 21, 2020

deathtrip commented Feb 21, 2020

madaidan commented Feb 22, 2020

don't force PTI on AMD users #27

don't force PTI on AMD users #27

Comments

deathtrip commented Feb 20, 2020

XHDR commented Feb 21, 2020

deathtrip commented Feb 21, 2020

anthraxx commented Feb 21, 2020

madaidan commented Feb 21, 2020

deathtrip commented Feb 21, 2020

madaidan commented Feb 22, 2020