Build err v3 #17

bergwolf · 2013-07-09T09:44:26Z

I updated the build error patchset to address comments on v2.

Only the last three patches were changed. Patch 12 was added to remove linux/obd.h because the client_obd_lock_t usage is broken in non-x86 platforms and the functionality is already available in kernel.

Peng Tao (13):
staging/lustre: fix Lustre code link order
staging/lustre: don't assert module owner
staging/lustre: don't assert ln_refcount in LNetGetId
stating/lustre: only build if configured as module
staging/lustre: remove HIPQUAD
staging/lustre: fix build error when !CONFIG_SMP
staging/lustre: fix build on s390
staging/lustre/llite: add missing include file for prefetchw
staging/lustre/llite: fix build erorr if CONFIG_FS_POSIX_ACL is off
staging/lustre: fix build when CONFIG_UIDGID_STRICT_TYPE_CHECKS is on
staging/lustre: fix build error on non-x86 platforms
staging/lustre: cleanup linux/obd.h
staging/lustre: fix build warnning on 32bit system

Change Makefiles to keep link order in match with Lustre module dependency, so that when Lustre is built in kernel, we'll have the same dependency. Otherwise we'll crash kernel if Lustre is builtin due to missing internal dependency. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com>

It can well be NULL if Lustre is builtin. Signed-off-by: Peng Tao <tao.peng@emc.com>

If LNetNIInit() fails, we'll get zero ln_refcount. So fail LNetGetId() properly instead of asserting. We can get to it when socklnd fails to scan network interfaces, which is possible if Lustre is builtin. Signed-off-by: Peng Tao <tao.peng@emc.com>

Lustre internal dependency needs to be cleaned up. Currently, libcfs is acting as a basis of all other modules, while other modules in lustre/ directory in turn depend on lnet modules. It creates a dependency loop that need to be fixed. Hopefully we will remove libcfs in the end. So just disable buildin for now. Signed-off-by: Peng Tao <tao.peng@emc.com>

Stephen Rothwell reported below error on powerpc: In file included from drivers/staging/lustre/include/linux/libcfs/libcfs.h:203:0, from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.h:67, from drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c:41: drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd.c: In function 'kiblnd_dev_need_failover': drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h:215:16: error: implicit declaration of function 'NIPQUAD' [-Werror=implicit-function-declaration] static struct libcfs_debug_msg_data msgdata; \ ^ We should just remove HIPQUAD and replace it with %pI4. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peng Tao <bergwolf@gmail.com>

Three functions cfs_cpu_ht_nsiblings, cfs_cpt_cpumask and cfs_cpt_table_print are missing if !CONFIG_SMP. cpumask_t/nodemask_t/__read_mostly/____cacheline_aligned are redefined. Signed-off-by: Peng Tao <tao.peng@emc.com>

As reported by Fengguang: In file included from drivers/staging/lustre/lustre/obdclass/../include/lustre/lustre_idl.h:99:0, from drivers/staging/lustre/lustre/obdclass/../include/lprocfs_status.h:46, from drivers/staging/lustre/lustre/obdclass/../include/obd_support.h:42, from drivers/staging/lustre/lustre/obdclass/../include/obd_class.h:40, from drivers/staging/lustre/lustre/obdclass/lu_object.c:53: drivers/staging/lustre/lustre/obdclass/../include/lustre/lustre_user.h:356:10: error: field 'lmd_st' has incomplete type drivers/staging/lustre/lustre/obdclass/../include/lustre/lustre_user.h:361:10: error: field 'lmd_st' has incomplete type Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com>

Got below errors on s390 build: CC [M] drivers/staging/lustre/lustre/llite/dir.o drivers/staging/lustre/lustre/llite/dir.c: In function 'll_dir_filler': drivers/staging/lustre/lustre/llite/dir.c:225:3: error: implicit declaration of function 'prefetchw' [-Werror=implicit-function-declaration] Signed-off-by: Peng Tao <tao.peng@emc.com>

Signed-off-by: Peng Tao <tao.peng@emc.com>

kuid_t/kgid_t are wrappered when CONFIG_UIDGID_STRICT_TYPE_CHECKS is on. Lustre build is broken because we always treat them as plain __u32. The patch fixes it. Internally, Lustre always use __u32 uid/gid, and convert to kuid_t/kgid_t when necessary. Signed-off-by: Peng Tao <tao.peng@emc.com>

dump_trace() is only available on X86. Without it, Lustre's own watchdog is broken. We can only dump current task's stack. The client-side this code is much less likely to hit deadlocks and it's probably OK to drop this altogether, since we hardly have any ptlrpc threads on clients, most notable ones are ldlm cb threads that should not really be blocking on the client anyway. Remove libcfs watchdog for now, until the upstream kernel watchdog can detect distributed deadlocks and dump other kernel threads. Cc: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com>

client_obd_lock_t is not necessary. It is for debug purpose only, ignores fairness and may cause starvation. Besides, such deadlock can be detected by kernel watchdog properly. Move other bits of linux/obd.h into obd.h. Signed-off-by: Peng Tao <tao.peng@emc.com>

Building on 32bit system, I got warnings like below: drivers/staging/lustre/lustre/llite/../include/lprocfs_status.h:666:7: note: expected ‘long unsigned int *’ but argument is of type ‘size_t *’ char *lprocfs_find_named_value(const char *buffer, const char *name, drivers/staging/lustre/lustre/lov/lov_io.c: In function ‘lov_io_rw_iter_init’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ Signed-off-by: Peng Tao <tao.peng@emc.com>

Several people reported the warning: "kernel BUG at kernel/timer.c:729!" and the stack trace is: #7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905 #8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge] #9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge] #10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge] #11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge] #12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc #13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6 #14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad #15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17 #16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68 #17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101 #18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8 #19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun] #20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun] #21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1 #22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe #23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f #24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1 #25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292 this is due to I forgot to check if mp->timer is armed in br_multicast_del_pg(). This bug is introduced by commit 9f00b2e (bridge: only expire the mdb entry when query is received). Same for __br_mdb_del(). Tested-by: poma <pomidorabelisima@gmail.com> Reported-by: LiYonghua <809674045@qq.com> Reported-by: Robert Hancock <hancockrwd@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…s struct file The following call chain: ------------------------------------------------------------ nfs4_get_vfs_file - nfsd_open - dentry_open - do_dentry_open - __get_file_write_access - get_write_access - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY; ------------------------------------------------------------ can result in the following state: ------------------------------------------------------------ struct nfs4_file { ... fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0}, fi_access = {{ counter = 0x1 }, { counter = 0x0 }}, ... ------------------------------------------------------------ 1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NULL, hence nfsd_open() is called where we get status set to an error and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented. 2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented. Thus we leave a landmine in the form of the nfs4_file data structure in an incorrect state. 3) Eventually, when __nfs4_file_put_access() is called it finds fi_access[O_WRONLY] being non-zero, it decrements it and calls nfs4_file_put_fd() which tries to fput -ETXTBSY. ------------------------------------------------------------ ... [exception RIP: fput+0x9] RIP: ffffffff81177fa9 RSP: ffff88062e365c90 RFLAGS: 00010282 RAX: ffff880c2b3d99cc RBX: ffff880c2b3d9978 RCX: 0000000000000002 RDX: dead000000100101 RSI: 0000000000000001 RDI: ffffffffffffffe6 RBP: ffff88062e365c90 R8: ffff88041fe797d8 R9: ffff88062e365d58 R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd] #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd] #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd] #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd] #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd] #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd] #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd] #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc] #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc] #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd] #19 [ffff88062e365ee8] kthread at ffffffff81090886 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a ------------------------------------------------------------ Cc: stable@vger.kernel.org Signed-off-by: Harshula Jayasuriya <harshula@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

BugLink: http://bugs.launchpad.net/bugs/1235977 The profile introspection seq file has a locking bug when policy is viewed from a virtual root (task in a policy namespace), introspection from the real root is not affected. The test for root while (parent) { is correct for the real root, but incorrect for tasks in a policy namespace. This allows the task to walk backup the policy tree past its virtual root causing it to be unlocked before the virtual root should be in the p_stop fn. This results in the following lockdep back trace: [ 78.479744] [ BUG: bad unlock balance detected! ] [ 78.479792] 3.11.0-11-generic #17 Not tainted [ 78.479838] ------------------------------------- [ 78.479885] grep/2223 is trying to release lock (&ns->lock) at: [ 78.479952] [<ffffffff817bf3be>] mutex_unlock+0xe/0x10 [ 78.480002] but there are no more locks to release! [ 78.480037] [ 78.480037] other info that might help us debug this: [ 78.480037] 1 lock held by grep/2223: [ 78.480037] #0: (&p->lock){+.+.+.}, at: [<ffffffff812111bd>] seq_read+0x3d/0x3d0 [ 78.480037] [ 78.480037] stack backtrace: [ 78.480037] CPU: 0 PID: 2223 Comm: grep Not tainted 3.11.0-11-generic #17 [ 78.480037] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 78.480037] ffffffff817bf3be ffff880007763d60 ffffffff817b97ef ffff8800189d2190 [ 78.480037] ffff880007763d88 ffffffff810e1c6e ffff88001f044730 ffff8800189d2190 [ 78.480037] ffffffff817bf3be ffff880007763e00 ffffffff810e5bd6 0000000724fe56b7 [ 78.480037] Call Trace: [ 78.480037] [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10 [ 78.480037] [<ffffffff817b97ef>] dump_stack+0x54/0x74 [ 78.480037] [<ffffffff810e1c6e>] print_unlock_imbalance_bug+0xee/0x100 [ 78.480037] [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10 [ 78.480037] [<ffffffff810e5bd6>] lock_release_non_nested+0x226/0x300 [ 78.480037] [<ffffffff817bf2fe>] ? __mutex_unlock_slowpath+0xce/0x180 [ 78.480037] [<ffffffff817bf3be>] ? mutex_unlock+0xe/0x10 [ 78.480037] [<ffffffff810e5d5c>] lock_release+0xac/0x310 [ 78.480037] [<ffffffff817bf2b3>] __mutex_unlock_slowpath+0x83/0x180 [ 78.480037] [<ffffffff817bf3be>] mutex_unlock+0xe/0x10 [ 78.480037] [<ffffffff81376c91>] p_stop+0x51/0x90 [ 78.480037] [<ffffffff81211408>] seq_read+0x288/0x3d0 [ 78.480037] [<ffffffff811e9d9e>] vfs_read+0x9e/0x170 [ 78.480037] [<ffffffff811ea8cc>] SyS_read+0x4c/0xa0 [ 78.480037] [<ffffffff817ccc9d>] system_call_fastpath+0x1a/0x1f Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com>

This patch makes a copy of the 'template_fmt' function argument so that the latter will not be modified by strsep(), which does the splitting by replacing the given separator with '\0'. IMA: No TPM chip found, activating TPM-bypass! Unable to handle kernel pointer dereference at virtual kernel address 0000000000842000 Oops: 0004 [#1] SMP Modules linked in: CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00098-g3ce1217d6cd5 #17 task: 000000003ffa0000 ti: 000000003ff84000 task.ti: 000000003ff84000 Krnl PSW : 0704e00180000000 000000000044bf88 (strsep+0x7c/0xa0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 000000000000007c 000000000000007c 000000003ff87d90 0000000000821fd8 0000000000000000 000000000000007c 0000000000aa37e0 0000000000aa9008 0000000000000051 0000000000a114d8 0000000100000002 0000000000842bde 0000000000842bdf 00000000006f97f0 000000000040062c 000000003ff87cf0 Krnl Code: 000000000044bf7c: a7f4000a brc 15,44bf90 000000000044bf80: b90200cc ltgr %r12,%r12 #000000000044bf84: a7840006 brc 8,44bf90 >000000000044bf88: 9200c000 mvi 0(%r12),0 000000000044bf8c: 41c0c001 la %r12,1(%r12) 000000000044bf90: e3c020000024 stg %r12,0(%r2) 000000000044bf96: b904002b lgr %r2,%r11 000000000044bf9a: ebbcf0700004 lmg %r11,%r12,112(%r15) Call Trace: ([<00000000004005fe>] ima_init_template+0xa2/0x1bc) [<0000000000a7c896>] ima_init+0x7a/0xa8 [<0000000000a7c938>] init_ima+0x24/0x40 [<00000000001000e8>] do_one_initcall+0x68/0x128 [<0000000000a4eb56>] kernel_init_freeable+0x20a/0x2b4 [<00000000006a1ff4>] kernel_init+0x30/0x178 [<00000000006b69fe>] kernel_thread_starter+0x6/0xc [<00000000006b69f8>] kernel_thread_starter+0x0/0xc Last Breaking-Event-Address: [<000000000044bf42>] strsep+0x36/0xa0 Fixes commit: adf53a7 ima: new templates management mechanism Changelog v1: - make template_fmt 'const char *' (reported-by James Morris) - fix kstrdup memory leak (reported-by James Morris) Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Roberto Sassu <roberto.sassu@polito.it> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>

@offset

commit 236cf17 upstream. When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of bits we need by 8 to figure out how many bytes to allocate. However, bitmap elements are always accessed as unsigned longs, and if we didn't happen to allocate a size such that size % sizeof(unsigned long) == 0, bitmap accesses may go past the end of the allocation. When using KASAN (which does byte-granular access checks), this results in a continuous stream of BUGs whenever these bitmaps are accessed: ============================================================================= BUG kmalloc-128 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in vgic_init.part.25+0x55c/0x990 age=7493 cpu=3 pid=1730 INFO: Slab 0xffffffbde6d5da40 objects=16 used=15 fp=0xffffffc935769700 flags=0x4000000000000080 INFO: Object 0xffffffc935769500 @offset=1280 fp=0x (null) Bytes b4 ffffffc9357694f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffffffc935769570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Padding ffffffc9357695f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 3 PID: 1740 Comm: kvm-vcpu-0 Tainted: G B 4.4.0+ #17 Hardware name: ARM Juno development board (r1) (DT) Call trace: [<ffffffc00008e770>] dump_backtrace+0x0/0x280 [<ffffffc00008ea04>] show_stack+0x14/0x20 [<ffffffc000726360>] dump_stack+0x100/0x188 [<ffffffc00030d324>] print_trailer+0xfc/0x168 [<ffffffc000312294>] object_err+0x3c/0x50 [<ffffffc0003140fc>] kasan_report_error+0x244/0x558 [<ffffffc000314548>] __asan_report_load8_noabort+0x48/0x50 [<ffffffc000745688>] __bitmap_or+0xc0/0xc8 [<ffffffc0000d9e44>] kvm_vgic_flush_hwstate+0x1bc/0x650 [<ffffffc0000c514c>] kvm_arch_vcpu_ioctl_run+0x2ec/0xa60 [<ffffffc0000b9a6c>] kvm_vcpu_ioctl+0x474/0xa68 [<ffffffc00036b7b0>] do_vfs_ioctl+0x5b8/0xcb0 [<ffffffc00036bf34>] SyS_ioctl+0x8c/0xa0 [<ffffffc000086cb0>] el0_svc_naked+0x24/0x28 Memory state around the buggy address: ffffffc935769400: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffffc935769500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc935769580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc935769600: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix the issue by always allocating a multiple of sizeof(unsigned long), as we do elsewhere in the vgic code. Fixes: c1bfb57 ("arm/arm64: KVM: vgic: switch to dynamic allocation") Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b6bc1c7 upstream. Function ib_create_qp() was failing to return an error when rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp() when trying to dereferece the qp pointer which was actually a negative errno. The crash: crash> log|grep BUG [ 136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 crash> bt PID: 3736 TASK: ffff8808543215c0 CPU: 2 COMMAND: "kworker/u64:2" #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0 #1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758 #2 [ffff88084d323480] crash_kexec at ffffffff8111682d #3 [ffff88084d3234b0] oops_end at ffffffff81032bd6 #4 [ffff88084d3234e0] no_context at ffffffff8106e431 #5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610 #6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4 #7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc #8 [ffff88084d323620] do_page_fault at ffffffff8106f057 #9 [ffff88084d323660] page_fault at ffffffff816e3148 [exception RIP: ib_create_qp+427] RIP: ffffffffa02554fb RSP: ffff88084d323718 RFLAGS: 00010246 RAX: 0000000000000004 RBX: fffffffffffffff4 RCX: 000000018020001f RDX: ffff880830997fc0 RSI: 0000000000000001 RDI: ffff88085f407200 RBP: ffff88084d323778 R8: 0000000000000001 R9: ffffea0020bae210 R10: ffffea0020bae218 R11: 0000000000000001 R12: ffff88084d3237c8 R13: 00000000fffffff4 R14: ffff880859fa5000 R15: ffff88082eb89800 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm] #11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma] #12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma] #13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma] #14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma] #15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm] #16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm] #17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm] #18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm] #19 [ffff88084d323cb0] process_one_work at ffffffff810a1483 #20 [ffff88084d323d90] worker_thread at ffffffff810a211d #21 [ffff88084d323ec0] kthread at ffffffff810a6c5c #22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf Fixes: 632bc3f ("IB/core, RDMA RW API: Do not exceed QP SGE send limit") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4dfce57 upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] #10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] #11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] #12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] #13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] #14 [ffff8800a57bbe00] evict at ffffffff811e1b67 #15 [ffff8800a57bbe28] iput at ffffffff811e23a5 #16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 #17 [ffff8800a57bbe88] dput at ffffffff811dd06c #18 [ffff8800a57bbea8] __fput at ffffffff811c823b #19 [ffff8800a57bbef0] ____fput at ffffffff811c846e #20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 #21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c #22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

…s metrics" test Linux 5.9 introduced perf test case "Parse and process metrics" and on s390 this test case always dumps core: [root@t35lp67 perf]# ./perf test -vvvv -F 67 67: Parse and process metrics : --- start --- metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC parsing metric: inst_retired.any / cpu_clk_unhalted.thread Segmentation fault (core dumped) [root@t35lp67 perf]# I debugged this core dump and gdb shows this call chain: (gdb) where #0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6 #1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6 #2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any", n=<optimized out>) at util/metricgroup.c:368 #3 find_metric (map=<optimized out>, map=<optimized out>, metric=0x1e6ea20 "inst_retired.any") at util/metricgroup.c:765 #4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0, metric_no_group=<optimized out>, m=<optimized out>) at util/metricgroup.c:844 #5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0, metric_no_group=<optimized out>) at util/metricgroup.c:881 #6 metricgroup__add_metric (metric=<optimized out>, metric_no_group=metric_no_group@entry=false, events=<optimized out>, events@entry=0x3ffd84fb878, metric_list=0x0, metric_list@entry=0x3ffd84fb868, map=0x0) at util/metricgroup.c:943 #7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>, metric_list=0x3ffd84fb868, events=0x3ffd84fb878, metric_no_group=<optimized out>, list=<optimized out>) at util/metricgroup.c:988 #8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260, str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>, metric_no_merge=<optimized out>, fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>, metric_events=0x3ffd84fba58, map=0x1) at util/metricgroup.c:1040 #9 0x0000000001103eb2 in metricgroup__parse_groups_test( evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>, str=str@entry=0x12f34b2 "IPC", metric_no_group=metric_no_group@entry=false, metric_no_merge=metric_no_merge@entry=false, metric_events=0x3ffd84fba58) at util/metricgroup.c:1082 #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0, ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC", vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:159 #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8, name=0x12f34b2 "IPC") at tests/parse-metric.c:189 #12 test_ipc () at tests/parse-metric.c:208 ..... ..... omitted many more lines This test case was added with commit 218ca91 ("perf tests: Add parse metric test for frontend metric"). When I compile with make DEBUG=y it works fine and I do not get a core dump. It turned out that the above listed function call chain worked on a struct pmu_event array which requires a trailing element with zeroes which was missing. The marco map_for_each_event() loops over that array tests for members metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes the issue. Output after: [root@t35lp46 perf]# ./perf test 67 67: Parse and process metrics : Ok [root@t35lp46 perf]# Committer notes: As Ian remarks, this is not s390 specific: <quote Ian> This also shows up with address sanitizer on all architectures (perhaps change the patch title) and perhaps add a "Fixes: <commit>" tag. ================================================================= ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp 0x7ffd24327c58 READ of size 8 at 0x55c93b4d59e8 thread T0 #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2 #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9 #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9 #3 0x55c93a1528db in metricgroup__add_metric tools/perf/util/metricgroup.c:943:9 #4 0x55c93a151996 in metricgroup__add_metric_list tools/perf/util/metricgroup.c:988:9 #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8 #6 0x55c93a1513e1 in metricgroup__parse_groups_test tools/perf/util/metricgroup.c:1082:9 #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8 #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9 #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2 #10 0x55c93a00f1e8 in test__parse_metric tools/perf/tests/parse-metric.c:345:2 #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9 #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9 #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9 #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11 #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8 #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2 #18 0x55c939e45f7e in main tools/perf/perf.c:539:3 0x55c93b4d59e8 is located 0 bytes to the right of global variable 'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25' (0x55c93b4d54a0) of size 1352 SUMMARY: AddressSanitizer: global-buffer-overflow tools/perf/util/metricgroup.c:764:2 in find_metric Shadow bytes around the buggy address: 0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9 0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00 0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc </quote> I'm also adding the missing "Fixes" tag and setting just .name to NULL, as doing it that way is more compact (the compiler will zero out everything else) and the table iterators look for .name being NULL as the sentinel marking the end of the table. Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

exceptions may be traversed using list_for_each_entry_rcu() outside of an RCU read side critical section BUT under the protection of decgroup_mutex. Hence add the corresponding lockdep expression to fix the following false-positive warning: [ 2.304417] ============================= [ 2.304418] WARNING: suspicious RCU usage [ 2.304420] 5.5.4-stable #17 Tainted: G E [ 2.304422] ----------------------------- [ 2.304424] security/device_cgroup.c:355 RCU-list traversed in non-reader section!! Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: James Morris <jmorris@namei.org>

The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx. Asan reported following leak (and more): Direct leak of 128 byte(s) in 1 object(s) allocated from: #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14) #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497) #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111 #4 0x55f7e7341667 in expr__add_ref util/expr.c:120 #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783 #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858 #7 0x55f7e712390b in compute_single tests/parse-metric.c:128 #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180 #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196 #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295 #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355 #12 0x55f7e70be09b in run_test tests/builtin-test.c:410 #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440 #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661 #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807 #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: 6d432c4 ("perf tools: Add test_generic_metric function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There are four different callback functions that are used for the rproc_handle_resource_t callback that all have different second parameter types. rproc_handle_vdev -> struct fw_rsc_vdev rproc_handle_trace -> struct fw_rsc_trace rproc_handle_devmem -> struct fw_rsc_devmem rproc_handle_carveout -> struct fw_rsc_carveout These callbacks are cast to rproc_handle_resource_t so that there is no error about incompatible pointer types. Unfortunately, this is a Clang's Control-Flow Integrity checking violation, which verifies that the callback function's types match the prototypes exactly before jumping. [ 7.275750] Kernel panic - not syncing: CFI failure (target: rproc_handle_vdev+0x0/0x4) [ 7.283763] CPU: 2 PID: 1 Comm: init Tainted: G C O 5.4.70-03301-g527af2c96672 #17 [ 7.292463] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 7.297779] Call trace: [ 7.300232] dump_backtrace.cfi_jt+0x0/0x4 [ 7.304337] show_stack+0x18/0x24 [ 7.307660] dump_stack+0xb8/0x114 [ 7.311069] panic+0x164/0x3d4 [ 7.314130] __ubsan_handle_cfi_check_fail_abort+0x0/0x14 [ 7.319533] perf_proc_update_handler+0x0/0xcc [ 7.323983] __cfi_check+0x63278/0x6a290 [ 7.327913] rproc_boot+0x3f8/0x738 [ 7.331404] rproc_add+0x68/0x110 [ 7.334738] imx_rproc_probe+0x5e4/0x708 [imx_rproc] [ 7.339711] platform_drv_probe+0xac/0xf0 [ 7.343726] really_probe+0x260/0x65c [ 7.347393] driver_probe_device+0x64/0x100 [ 7.351580] device_driver_attach+0x6c/0xac [ 7.355766] __driver_attach+0xdc/0x184 [ 7.359609] bus_for_each_dev+0x98/0x104 [ 7.363537] driver_attach+0x24/0x30 [ 7.367117] bus_add_driver+0x100/0x1e0 [ 7.370958] driver_register+0x78/0x114 [ 7.374800] __platform_driver_register+0x44/0x50 [ 7.379514] init_module+0x20/0xfe8 [imx_rproc] [ 7.384049] do_one_initcall+0x190/0x348 [ 7.387979] do_init_module+0x5c/0x210 [ 7.391731] load_module+0x2fbc/0x3590 [ 7.395485] __arm64_sys_finit_module+0xb8/0xec [ 7.400025] el0_svc_common+0xb4/0x19c [ 7.403777] el0_svc_handler+0x74/0x98 [ 7.407531] el0_svc+0x8/0xc [ 7.410419] SMP: stopping secondary CPUs [ 7.414648] Kernel Offset: disabled [ 7.418142] CPU features: 0x00010002,2000200c [ 7.422501] Memory Limit: none To fix this, change the second parameter of all functions to void * and use a local variable with the correct type so that everything works properly. With this, we can remove casting to rproc_handle_resource_t for these functions. Signed-off-by: Jindong Yue <jindong.yue@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210224055825.7417-1-jindong.yue@nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

[BUG] When running generic/095, there is a high chance to crash with subpage data RW support: assertion failed: PagePrivate(page) && page->private ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3403! Internal error: Oops - BUG: 0 [#1] SMP CPU: 1 PID: 3567 Comm: fio Tainted: 5.12.0-rc7-custom+ #17 Hardware name: Khadas VIM3 (DT) Call trace: assertfail.constprop.0+0x28/0x2c [btrfs] btrfs_subpage_assert+0x80/0xa0 [btrfs] btrfs_subpage_set_uptodate+0x34/0xec [btrfs] btrfs_page_clamp_set_uptodate+0x74/0xa4 [btrfs] btrfs_dirty_pages+0x160/0x270 [btrfs] btrfs_buffered_write+0x444/0x630 [btrfs] btrfs_direct_write+0x1cc/0x2d0 [btrfs] btrfs_file_write_iter+0xc0/0x160 [btrfs] new_sync_write+0xe8/0x180 vfs_write+0x1b4/0x210 ksys_pwrite64+0x7c/0xc0 __arm64_sys_pwrite64+0x24/0x30 el0_svc_common.constprop.0+0x70/0x140 do_el0_svc+0x28/0x90 el0_svc+0x2c/0x54 el0_sync_handler+0x1a8/0x1ac el0_sync+0x170/0x180 Code: f0000160 913be042 913c4000 955444bc (d4210000) ---[ end trace 3fdd39f4cccedd68 ]--- [CAUSE] Although prepare_pages() calls find_or_create_page(), which returns the page locked, but in later prepare_uptodate_page() calls, we may call btrfs_readpage() which will unlock the page before it returns. This leaves a window where btrfs_releasepage() can sneak in and release the page, clearing page->private and causing above ASSERT(). [FIX] In prepare_uptodate_page(), we should not only check page->mapping, but also PagePrivate() to ensure we are still holding the correct page which has proper fs context setup. Reported-by: Ritesh Harjani <riteshh@linux.ibm.com> Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt' Fixes: 0495e33 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock") Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

Some metadata files are handled before MFT. This adds a null pointer check for some corner cases that could lead to NPD while reading these metadata files for a malformed NTFS image. [ 240.190827] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 240.191583] #PF: supervisor read access in kernel mode [ 240.191956] #PF: error_code(0x0000) - not-present page [ 240.192391] PGD 0 P4D 0 [ 240.192897] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 240.193805] CPU: 0 PID: 242 Comm: mount Tainted: G B 5.19.0+ #17 [ 240.194477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 240.195152] RIP: 0010:ni_find_attr+0xae/0x300 [ 240.195679] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f [ 240.196642] RSP: 0018:ffff88800812f690 EFLAGS: 00000286 [ 240.197019] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff85ef037a [ 240.197523] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff88e95f60 [ 240.197877] RBP: ffff88800812f738 R08: 0000000000000001 R09: fffffbfff11d2bed [ 240.198292] R10: ffffffff88e95f67 R11: fffffbfff11d2bec R12: 0000000000000000 [ 240.198647] R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [ 240.199410] FS: 00007f233c33be40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 240.199895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 240.200314] CR2: 0000000000000158 CR3: 0000000004d32000 CR4: 00000000000006f0 [ 240.200839] Call Trace: [ 240.201104] <TASK> [ 240.201502] ? ni_load_mi+0x80/0x80 [ 240.202297] ? ___slab_alloc+0x465/0x830 [ 240.202614] attr_load_runs_vcn+0x8c/0x1a0 [ 240.202886] ? __kasan_slab_alloc+0x32/0x90 [ 240.203157] ? attr_data_write_resident+0x250/0x250 [ 240.203543] mi_read+0x133/0x2c0 [ 240.203785] mi_get+0x70/0x140 [ 240.204012] ni_load_mi_ex+0xfa/0x190 [ 240.204346] ? ni_std5+0x90/0x90 [ 240.204588] ? __kasan_kmalloc+0x88/0xb0 [ 240.204859] ni_enum_attr_ex+0xf1/0x1c0 [ 240.205107] ? ni_fname_type.part.0+0xd0/0xd0 [ 240.205600] ? ntfs_load_attr_list+0xbe/0x300 [ 240.205864] ? ntfs_cmp_names_cpu+0x125/0x180 [ 240.206157] ntfs_iget5+0x56c/0x1870 [ 240.206510] ? ntfs_get_block_bmap+0x70/0x70 [ 240.206776] ? __kasan_kmalloc+0x88/0xb0 [ 240.207030] ? set_blocksize+0x95/0x150 [ 240.207545] ntfs_fill_super+0xb8f/0x1e20 [ 240.207839] ? put_ntfs+0x1d0/0x1d0 [ 240.208069] ? vsprintf+0x20/0x20 [ 240.208467] ? mutex_unlock+0x81/0xd0 [ 240.208846] ? set_blocksize+0x95/0x150 [ 240.209221] get_tree_bdev+0x232/0x370 [ 240.209804] ? put_ntfs+0x1d0/0x1d0 [ 240.210519] ntfs_fs_get_tree+0x15/0x20 [ 240.210991] vfs_get_tree+0x4c/0x130 [ 240.211455] path_mount+0x645/0xfd0 [ 240.211806] ? putname+0x80/0xa0 [ 240.212112] ? finish_automount+0x2e0/0x2e0 [ 240.212559] ? kmem_cache_free+0x110/0x390 [ 240.212906] ? putname+0x80/0xa0 [ 240.213329] do_mount+0xd6/0xf0 [ 240.213829] ? path_mount+0xfd0/0xfd0 [ 240.214246] ? __kasan_check_write+0x14/0x20 [ 240.214774] __x64_sys_mount+0xca/0x110 [ 240.215080] do_syscall_64+0x3b/0x90 [ 240.215442] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 240.215811] RIP: 0033:0x7f233b4e948a [ 240.216104] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 240.217615] RSP: 002b:00007fff02211ec8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 240.218718] RAX: ffffffffffffffda RBX: 0000561cdc35b060 RCX: 00007f233b4e948a [ 240.219556] RDX: 0000561cdc35b260 RSI: 0000561cdc35b2e0 RDI: 0000561cdc363af0 [ 240.219975] RBP: 0000000000000000 R08: 0000561cdc35b280 R09: 0000000000000020 [ 240.220403] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000561cdc363af0 [ 240.220803] R13: 0000561cdc35b260 R14: 0000000000000000 R15: 00000000ffffffff [ 240.221256] </TASK> [ 240.221567] Modules linked in: [ 240.222028] CR2: 0000000000000158 [ 240.223291] ---[ end trace 0000000000000000 ]--- [ 240.223669] RIP: 0010:ni_find_attr+0xae/0x300 [ 240.224058] Code: c8 48 c7 45 88 c0 4e 5e 86 c7 00 f1 f1 f1 f1 c7 40 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 e2 d9f [ 240.225033] RSP: 0018:ffff88800812f690 EFLAGS: 00000286 [ 240.225968] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff85ef037a [ 240.226624] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff88e95f60 [ 240.227307] RBP: ffff88800812f738 R08: 0000000000000001 R09: fffffbfff11d2bed [ 240.227816] R10: ffffffff88e95f67 R11: fffffbfff11d2bec R12: 0000000000000000 [ 240.228330] R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [ 240.228729] FS: 00007f233c33be40(0000) GS:ffff888058200000(0000) knlGS:0000000000000000 [ 240.229281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 240.230298] CR2: 0000000000000158 CR3: 0000000004d32000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Upon physical link change, firmware reports to the kernel about the change along with the details like speed, lmac_type_id, etc. Kernel derives lmac_type based on lmac_type_id received from firmware. In a few scenarios, firmware returns an invalid lmac_type_id, which is resulting in below kernel panic. This patch adds the missing validation of the lmac_type_id field. Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 35.321595] Modules linked in: [ 35.328982] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.4.210-g2e3169d8e1bc-dirty #17 [ 35.337014] Hardware name: Marvell CN103XX board (DT) [ 35.344297] Workqueue: events work_for_cpu_fn [ 35.352730] pstate: 40400089 (nZcv daIf +PAN -UAO) [ 35.360267] pc : strncpy+0x10/0x30 [ 35.366595] lr : cgx_link_change_handler+0x90/0x180 Fixes: 61071a8 ("octeontx2-af: Forward CGX link notifications to PFs") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

The buffer is used to save register mapping in a sample. Normally perf samples don't have any register so the string should be empty. But it missed to initialize the buffer when the size is 0. And it's passed to PyUnicode_FromString() with a garbage data. So it returns NULL due to invalid input (instead of an empty unicode string object) which causes a segfault like below: Thread 2.1 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7ffff7c83780 (LWP 193775)] 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 (gdb) bt #0 0x00007ffff6dbca2e in PyDict_SetItem () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 #1 0x00007ffff6dbf848 in PyDict_SetItemString () from /lib/x86_64-linux-gnu/libpython3.11.so.1.0 #2 0x000055555575824d in pydict_set_item_string_decref (val=0x0, key=0x5555557f96e3 "iregs", dict=0x7ffff5f7f780) at util/scripting-engines/trace-event-python.c:145 #3 set_regs_in_dict (evsel=0x555555efc370, sample=0x7fffffffb870, dict=0x7ffff5f7f780) at util/scripting-engines/trace-event-python.c:776 #4 get_perf_sample_dict (sample=sample@entry=0x7fffffffb870, evsel=evsel@entry=0x555555efc370, al=al@entry=0x7fffffffb2e0, addr_al=addr_al@entry=0x0, callchain=callchain@entry=0x7ffff63ef440) at util/scripting-engines/trace-event-python.c:923 #5 0x0000555555758ec1 in python_process_tracepoint (sample=0x7fffffffb870, evsel=0x555555efc370, al=0x7fffffffb2e0, addr_al=0x0) at util/scripting-engines/trace-event-python.c:1044 #6 0x00005555555c5db8 in process_sample_event (tool=<optimized out>, event=<optimized out>, sample=<optimized out>, evsel=0x555555efc370, machine=0x555555ef4d68) at builtin-script.c:2421 #7 0x00005555556b7793 in perf_session__deliver_event (session=0x555555ef4b60, event=0x7ffff62ff7d0, tool=0x7fffffffc150, file_offset=30672, file_path=0x555555efb8a0 "perf.data") at util/session.c:1639 #8 0x00005555556bc864 in do_flush (show_progress=true, oe=0x555555efb700) at util/ordered-events.c:245 #9 __ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL, timestamp=timestamp@entry=0) at util/ordered-events.c:324 #10 0x00005555556bd06e in ordered_events__flush (oe=oe@entry=0x555555efb700, how=how@entry=OE_FLUSH__FINAL) at util/ordered-events.c:342 #11 0x00005555556b9d63 in __perf_session__process_events (session=0x555555ef4b60) at util/session.c:2465 #12 perf_session__process_events (session=0x555555ef4b60) at util/session.c:2627 #13 0x00005555555cb1d0 in __cmd_script (script=0x7fffffffc150) at builtin-script.c:2839 #14 cmd_script (argc=<optimized out>, argv=<optimized out>) at builtin-script.c:4365 #15 0x0000555555650811 in run_builtin (p=p@entry=0x555555ed8948 <commands+456>, argc=argc@entry=4, argv=argv@entry=0x7fffffffe240) at perf.c:323 #16 0x0000555555597eb3 in handle_internal_command (argv=0x7fffffffe240, argc=4) at perf.c:377 #17 run_argv (argv=<synthetic pointer>, argcp=<synthetic pointer>) at perf.c:421 #18 main (argc=4, argv=0x7fffffffe240) at perf.c:537 Fixes: 51cfe7a ("perf python: Avoid 2 leak sanitizer issues") Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Test runners on debug kernels occasionally fail with: # # RUN tls_err.13_aes_gcm.poll_partial_rec_async ... # # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1) # # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0) # # poll_partial_rec_async: Test failed at step #17 # # FAIL tls_err.13_aes_gcm.poll_partial_rec_async # not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async # # FAILED: 698 / 699 tests passed. This points to the second poll() in the test which is expected to wait for the sender to send the rest of the data. Apparently under some conditions that doesn't happen within 5ms, bump the timeout to 20ms. Fixes: 23fcb62 ("selftests: tls: add tests for poll behavior") Link: https://lore.kernel.org/r/20240213142055.395564-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

An errant disk backup on my desktop got into debugfs and triggered the following deadlock scenario in the amdgpu debugfs files. The machine also hard-resets immediately after those lines are printed (although I wasn't able to reproduce that part when reading by hand): [ 1318.016074][ T1082] ====================================================== [ 1318.016607][ T1082] WARNING: possible circular locking dependency detected [ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted [ 1318.017598][ T1082] ------------------------------------------------------ [ 1318.018096][ T1082] tar/1082 is trying to acquire lock: [ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80 [ 1318.019084][ T1082] [ 1318.019084][ T1082] but task is already holding lock: [ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.020607][ T1082] [ 1318.020607][ T1082] which lock already depends on the new lock. [ 1318.020607][ T1082] [ 1318.022081][ T1082] [ 1318.022081][ T1082] the existing dependency chain (in reverse order) is: [ 1318.023083][ T1082] [ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 1318.024114][ T1082] __ww_mutex_lock.constprop.0+0xe0/0x12f0 [ 1318.024639][ T1082] ww_mutex_lock+0x32/0x90 [ 1318.025161][ T1082] dma_resv_lockdep+0x18a/0x330 [ 1318.025683][ T1082] do_one_initcall+0x6a/0x350 [ 1318.026210][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.026728][ T1082] kernel_init+0x15/0x1a0 [ 1318.027242][ T1082] ret_from_fork+0x2c/0x40 [ 1318.027759][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.028281][ T1082] [ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}: [ 1318.029297][ T1082] dma_resv_lockdep+0x16c/0x330 [ 1318.029790][ T1082] do_one_initcall+0x6a/0x350 [ 1318.030263][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.030722][ T1082] kernel_init+0x15/0x1a0 [ 1318.031168][ T1082] ret_from_fork+0x2c/0x40 [ 1318.031598][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.032011][ T1082] [ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}: [ 1318.032778][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.033141][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.033487][ T1082] __might_fault+0x58/0x80 [ 1318.033814][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu] [ 1318.034181][ T1082] full_proxy_read+0x55/0x80 [ 1318.034487][ T1082] vfs_read+0xa7/0x360 [ 1318.034788][ T1082] ksys_read+0x70/0xf0 [ 1318.035085][ T1082] do_syscall_64+0x94/0x180 [ 1318.035375][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.035664][ T1082] [ 1318.035664][ T1082] other info that might help us debug this: [ 1318.035664][ T1082] [ 1318.036487][ T1082] Chain exists of: [ 1318.036487][ T1082] &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [ 1318.036487][ T1082] [ 1318.037310][ T1082] Possible unsafe locking scenario: [ 1318.037310][ T1082] [ 1318.037838][ T1082] CPU0 CPU1 [ 1318.038101][ T1082] ---- ---- [ 1318.038350][ T1082] lock(reservation_ww_class_mutex); [ 1318.038590][ T1082] lock(reservation_ww_class_acquire); [ 1318.038839][ T1082] lock(reservation_ww_class_mutex); [ 1318.039083][ T1082] rlock(&mm->mmap_lock); [ 1318.039328][ T1082] [ 1318.039328][ T1082] *** DEADLOCK *** [ 1318.039328][ T1082] [ 1318.040029][ T1082] 1 lock held by tar/1082: [ 1318.040259][ T1082] #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.040560][ T1082] [ 1318.040560][ T1082] stack backtrace: [ 1318.041053][ T1082] CPU: 22 PID: 1082 Comm: tar Not tainted 6.8.0-rc7-00015-ge0c8221b72c0 #17 3316c85d50e282c5643b075d1f01a4f6365e39c2 [ 1318.041329][ T1082] Hardware name: Gigabyte Technology Co., Ltd. B650 AORUS PRO AX/B650 AORUS PRO AX, BIOS F20 12/14/2023 [ 1318.041614][ T1082] Call Trace: [ 1318.041895][ T1082] <TASK> [ 1318.042175][ T1082] dump_stack_lvl+0x4a/0x80 [ 1318.042460][ T1082] check_noncircular+0x145/0x160 [ 1318.042743][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.043022][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.043301][ T1082] ? __might_fault+0x40/0x80 [ 1318.043580][ T1082] ? __might_fault+0x40/0x80 [ 1318.043856][ T1082] __might_fault+0x58/0x80 [ 1318.044131][ T1082] ? __might_fault+0x40/0x80 [ 1318.044408][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu 8fe2afaa910cbd7654c8cab23563a94d6caebaab] [ 1318.044749][ T1082] full_proxy_read+0x55/0x80 [ 1318.045042][ T1082] vfs_read+0xa7/0x360 [ 1318.045333][ T1082] ksys_read+0x70/0xf0 [ 1318.045623][ T1082] do_syscall_64+0x94/0x180 [ 1318.045913][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.046201][ T1082] ? lockdep_hardirqs_on+0x7d/0x100 [ 1318.046487][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.046773][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047057][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047337][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047611][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.047887][ T1082] RIP: 0033:0x7f480b70a39d [ 1318.048162][ T1082] Code: 91 ba 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb b2 e8 18 a3 01 00 0f 1f 84 00 00 00 00 00 80 3d a9 3c 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 53 48 83 [ 1318.048769][ T1082] RSP: 002b:00007ffde77f5c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1318.049083][ T1082] RAX: ffffffffffffffda RBX: 0000000000000800 RCX: 00007f480b70a39d [ 1318.049392][ T1082] RDX: 0000000000000800 RSI: 000055c9f2120c00 RDI: 0000000000000008 [ 1318.049703][ T1082] RBP: 0000000000000800 R08: 000055c9f2120a94 R09: 0000000000000007 [ 1318.050011][ T1082] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c9f2120c00 [ 1318.050324][ T1082] R13: 0000000000000008 R14: 0000000000000008 R15: 0000000000000800 [ 1318.050638][ T1082] </TASK> amdgpu_debugfs_mqd_read() holds a reservation when it calls put_user(), which may fault and acquire the mmap_sem. This violates the established locking order. Bounce the mqd data through a kernel buffer to get put_user() out of the illegal section. Fixes: 445d85e ("drm/amdgpu: add debugfs interface for reading MQDs") Cc: stable@vger.kernel.org # v6.5+ Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…rnel/git/netfilter/nf-next into main Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch #1 to #11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch #1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iter_finish_branch_entry() doesn't put the branch_info from/to map elements creating memory leaks. This can be seen with: ``` $ perf record -e cycles -b perf test -w noploop $ perf report -D ... Direct leak of 984344 byte(s) in 123043 object(s) allocated from: #0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69 #1 0x564d3400d10b in map__get util/map.h:186 #2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981 #3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151 #4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898 #5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238 #6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334 #7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655 #8 0x564d3403ba52 in do_flush util/ordered-events.c:245 #9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324 #10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708 #11 0x564d34032480 in perf_session__process_event util/session.c:1877 #12 0x564d340336ad in reader__read_event util/session.c:2399 #13 0x564d34033fdc in reader__process_events util/session.c:2448 #14 0x564d34033fdc in __perf_session__process_events util/session.c:2495 #15 0x564d34033fdc in perf_session__process_events util/session.c:2661 #16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065 #17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805 #18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350 #19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403 #20 0x564d33cdd827 in run_argv tools/perf/perf.c:447 #21 0x564d33cdd827 in main tools/perf/perf.c:561 ... ``` Clearing up the map_symbols properly creates maps reference count issues so resolve those. Resolving this issue doesn't improve peak heap consumption for the test above. Committer testing: $ sudo dnf install libasan $ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Yanteng Si <siyanteng@loongson.cn> Link: https://lore.kernel.org/r/20240807065136.1039977-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: raspberrypi/firmware#1894 Fixes: 0bae6af ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list. Fixes: 7f9b348 ("brd: convert to blk_alloc_disk/blk_cleanup_disk") Reported-by: Wupeng Ma <mawupeng1@huawei.com> Signed-off-by: Yang Erkun <yangerkun@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20241030034914.907829-1-yangerkun@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

…dfl() When getting an LLC CPU mask in the default CPU selection policy, scx_select_cpu_dfl(), a pointer to the sched_domain is dereferenced using rcu_read_lock() without holding rcu_read_lock(). Such an unprotected dereference often causes the following warning and can cause an invalid memory access in the worst case. Therefore, protect dereference of a sched_domain pointer using a pair of rcu_read_lock() and unlock(). [ 20.996135] ============================= [ 20.996345] WARNING: suspicious RCU usage [ 20.996563] 6.11.0-virtme #17 Tainted: G W [ 20.996576] ----------------------------- [ 20.996576] kernel/sched/ext.c:3323 suspicious rcu_dereference_check() usage! [ 20.996576] [ 20.996576] other info that might help us debug this: [ 20.996576] [ 20.996576] [ 20.996576] rcu_scheduler_active = 2, debug_locks = 1 [ 20.996576] 4 locks held by kworker/8:1/140: [ 20.996576] #0: ffff8b18c00dd348 ((wq_completion)pm){+.+.}-{0:0}, at: process_one_work+0x4a0/0x590 [ 20.996576] #1: ffffb3da01f67e58 ((work_completion)(&dev->power.work)){+.+.}-{0:0}, at: process_one_work+0x1ba/0x590 [ 20.996576] #2: ffffffffa316f9f0 (&rcu_state.gp_wq){..-.}-{2:2}, at: swake_up_one+0x15/0x60 [ 20.996576] #3: ffff8b1880398a60 (&p->pi_lock){-.-.}-{2:2}, at: try_to_wake_up+0x59/0x7d0 [ 20.996576] [ 20.996576] stack backtrace: [ 20.996576] CPU: 8 UID: 0 PID: 140 Comm: kworker/8:1 Tainted: G W 6.11.0-virtme #17 [ 20.996576] Tainted: [W]=WARN [ 20.996576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 20.996576] Workqueue: pm pm_runtime_work [ 20.996576] Sched_ext: simple (disabling+all), task: runnable_at=-6ms [ 20.996576] Call Trace: [ 20.996576] <IRQ> [ 20.996576] dump_stack_lvl+0x6f/0xb0 [ 20.996576] lockdep_rcu_suspicious.cold+0x4e/0x96 [ 20.996576] scx_select_cpu_dfl+0x234/0x260 [ 20.996576] select_task_rq_scx+0xfb/0x190 [ 20.996576] select_task_rq+0x47/0x110 [ 20.996576] try_to_wake_up+0x110/0x7d0 [ 20.996576] swake_up_one+0x39/0x60 [ 20.996576] rcu_core+0xb08/0xe50 [ 20.996576] ? srso_alias_return_thunk+0x5/0xfbef5 [ 20.996576] ? mark_held_locks+0x40/0x70 [ 20.996576] handle_softirqs+0xd3/0x410 [ 20.996576] irq_exit_rcu+0x78/0xa0 [ 20.996576] sysvec_apic_timer_interrupt+0x73/0x80 [ 20.996576] </IRQ> [ 20.996576] <TASK> [ 20.996576] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ 20.996576] RIP: 0010:_raw_spin_unlock_irqrestore+0x36/0x70 [ 20.996576] Code: f5 53 48 8b 74 24 10 48 89 fb 48 83 c7 18 e8 11 b4 36 ff 48 89 df e8 99 0d 37 ff f7 c5 00 02 00 00 75 17 9c 58 f6 c4 02 75 2b <65> ff 0d 5b 55 3c 5e 74 16 5b 5d e9 95 8e 28 00 e8 a5 ee 44 ff 9c [ 20.996576] RSP: 0018:ffffb3da01f67d20 EFLAGS: 00000246 [ 20.996576] RAX: 0000000000000002 RBX: ffffffffa4640220 RCX: 0000000000000040 [ 20.996576] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa1c7b27b [ 20.996576] RBP: 0000000000000246 R08: 0000000000000001 R09: 0000000000000000 [ 20.996576] R10: 0000000000000001 R11: 000000000000021c R12: 0000000000000246 [ 20.996576] R13: ffff8b1881363958 R14: 0000000000000000 R15: ffff8b1881363800 [ 20.996576] ? _raw_spin_unlock_irqrestore+0x4b/0x70 [ 20.996576] serial_port_runtime_resume+0xd4/0x1a0 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] __rpm_callback+0x44/0x170 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_callback+0x55/0x60 [ 20.996576] ? __pfx_serial_port_runtime_resume+0x10/0x10 [ 20.996576] rpm_resume+0x582/0x7b0 [ 20.996576] pm_runtime_work+0x7c/0xb0 [ 20.996576] process_one_work+0x1fb/0x590 [ 20.996576] worker_thread+0x18e/0x350 [ 20.996576] ? __pfx_worker_thread+0x10/0x10 [ 20.996576] kthread+0xe2/0x110 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork+0x34/0x50 [ 20.996576] ? __pfx_kthread+0x10/0x10 [ 20.996576] ret_from_fork_asm+0x1a/0x30 [ 20.996576] </TASK> [ 21.056592] sched_ext: BPF scheduler "simple" disabled (unregistered from user space) Signed-off-by: Changwoo Min <changwoo@igalia.com> Acked-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>

Current loop calls vfs_statfs() while holding the q->limits_lock. If FS takes some locking in vfs_statfs callback, this may lead to ABBA locking bug (at least, FAT fs has this issue actually). So this patch calls vfs_statfs() outside q->limits_locks instead, because looks like no reason to hold q->limits_locks while getting discord configs. Chain exists of: &sbi->fat_lock --> &q->q_usage_counter(io)#17 --> &q->limits_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->limits_lock); lock(&q->q_usage_counter(io)#17); lock(&q->limits_lock); lock(&sbi->fat_lock); *** DEADLOCK *** Reported-by: syzbot+a5d8c609c02f508672cc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a5d8c609c02f508672cc Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Jens Axboe <axboe@kernel.dk>

bergwolf added 13 commits July 9, 2013 16:57

staging/lustre: don't assert module owner

91c56bd

It can well be NULL if Lustre is builtin. Signed-off-by: Peng Tao <tao.peng@emc.com>

staging/lustre: fix build error when !CONFIG_SMP

836efc3

Three functions cfs_cpu_ht_nsiblings, cfs_cpt_cpumask and cfs_cpt_table_print are missing if !CONFIG_SMP. cpumask_t/nodemask_t/__read_mostly/____cacheline_aligned are redefined. Signed-off-by: Peng Tao <tao.peng@emc.com>

staging/lustre/llite: fix build erorr if CONFIG_FS_POSIX_ACL is off

5f2c5ff

Signed-off-by: Peng Tao <tao.peng@emc.com>

bergwolf closed this Oct 29, 2013

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Build err v3 #17

Build err v3 #17

bergwolf commented Jul 9, 2013

Build err v3 #17

Build err v3 #17

Conversation

bergwolf commented Jul 9, 2013