staging/lustre: adapt proc_dir_entry change #2

bergwolf · 2013-05-26T05:18:25Z

In 3.10 merge window, proc_dir_entry is now private to proc. However,
Lustre lprocfs depends heavily on it and its now-gone read_proc_t and
write_proc_t members.

The patch largely changed the fact, and made lprocfs depend on none of
proc_dir_entry private members. All lprocfs callers are converted to
use the new seq_file scheme.

Also lprocfs_srch is removed so that we can drop lprocfs_lock. All callers
are changed to save created pde in proper place.

See https://jira.hpdd.intel.com/browse/LU-3319 for more details.

Signed-off-by: Peng Tao tao.peng@emc.com

In 3.10 merge window, proc_dir_entry is now private to proc. However, Lustre lprocfs depends heavily on it and its now-gone read_proc_t and write_proc_t members. The patch largely changed the fact, and made lprocfs depend on none of proc_dir_entry private members. All lprocfs callers are converted to use the new seq_file scheme. Also lprocfs_srch is removed so that we can drop lprocfs_lock. All callers are changed to save created pde in proper place. See https://jira.hpdd.intel.com/browse/LU-3319 for more details. Signed-off-by: Peng Tao <tao.peng@emc.com>

This can easily be triggered if a new CPU is added (via ACPI hotplug mechanism) and from user-space you do: echo 1 > /sys/devices/system/cpu/cpu3/online (or wait for UDEV to do it) on a newly appeared physical CPU. The deadlock is that the "store_online" in drivers/base/cpu.c takes the cpu_hotplug_driver_lock() lock, then calls "cpu_up". "cpu_up" eventually ends up calling "save_mc_for_early" which also takes the cpu_hotplug_driver_lock() lock. And here is that lockdep thinks of it: smpboot: Stack at about ffff880075c39f44 smpboot: CPU3: has booted. microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25 ============================================= [ INFO: possible recursive locking detected ] 3.9.0upstream-10129-g167af0e #1 Not tainted --------------------------------------------- sh/2487 is trying to acquire lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20 but task is already holding lock: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(x86_cpu_hotplug_driver_mutex); lock(x86_cpu_hotplug_driver_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/2487: #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ca48d>] vfs_write+0x17d/0x190 #1: (&buffer->mutex){+.+.+.}, at: [<ffffffff812464ef>] sysfs_write_file+0x3f/0x160 #2: (s_active#20){.+.+.+}, at: [<ffffffff81246578>] sysfs_write_file+0xc8/0x160 #3: (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff81075512>] cpu_hotplug_driver_lock+0x12/0x20 #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff810961c2>] cpu_maps_update_begin+0x12/0x20 #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff810962a7>] cpu_hotplug_begin+0x27/0x60 Suggested-and-Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: fenghua.yu@intel.com Cc: xen-devel@lists.xensource.com Cc: stable@vger.kernel.org # for v3.9 Link: http://lkml.kernel.org/r/1368029583-23337-1-git-send-email-konrad.wilk@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

An inactive timer's base can refer to a offline cpu's base. In the current code, cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is trying to modify an inactive timer on that CPU with holding its timer base lock, then the lock will be reinitialized under its feet. This leads to following SPIN_BUG(). <0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466 <0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1 <4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) <4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30) <4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310) <4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) <4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) <4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48) <4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0) <4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) <4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4) <4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484) <4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0) <4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c) <4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8) As an example, this particular crash occurred when CPU #3 is executing mod_timer() on an inactive timer whose base is refered to offlined CPU #2. The code locked the timer_base corresponding to CPU #2. Before it could proceed, CPU #2 came online and reinitialized the spinlock corresponding to its base. Thus now CPU #3 held a lock which was reinitialized. When CPU #3 finally ended up unlocking the old cpu_base corresponding to CPU #2, we hit the above SPIN_BUG(). CPU #0 CPU #3 CPU #2 ------ ------- ------- ..... ...... <Offline> mod_timer() lock_timer_base spin_lock_irqsave(&base->lock) cpu_up(2) ..... ...... init_timers_cpu() .... ..... spin_lock_init(&base->lock) ..... spin_unlock_irqrestore(&base->lock) ...... <spin_bug> Allocation of per_cpu timer vector bases is done only once under "tvec_base_done[]" check. In the current code, spinlock_initialization of base->lock isn't under this check. When a CPU is up each time the base lock is reinitialized. Move base spinlock initialization under the check. Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

_enable_preprogram is marked as __init, but is called from _enable which is not. Without this patch, the board oopses after init. Tested on custom hardware and on beagle board xM. Otherwise we can get: Unable to handle kernel paging request at virtual address 000b0012 pgd = cf968000 *pgd=8fb06831, *pte=00000000, *ppte=00000000 PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.9.0 #2) PC is at _enable_preprogram+0x1c/0x24 LR is at omap_hwmod_enable+0x34/0x60 psr: 80000093 sp : cf95de08 ip : 00002de5 fp : bec33d4c r10: 00000000 r9 : 00000002 r8 : b6dd2c78 r7 : 00000004 r6 : 00000000 r5 : a0000013 r4 : cf95c000 r3 : 00000000 r2 : b6dd2c7c r1 : 00000000 r0 : 000b0012 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8f968019 DAC: 00000015 Process otpcmd (pid: 607, stack limit = 0xcf95c230) Stack: (0xcf95de08 to 0xcf95e000) de00: 00000001 cf91f840 00000000 c001d6fc 00000002 cf91f840 de20: cf8f7e10 c001de54 cf8f7e10 c001de78 c001de68 c01d5e80 00000000 cf8f7e10 de40: cf8f7e10 c01d5f28 cf8f7e10 c0530d30 00000000 c01d6f28 00000000 c0088664 de60: b6ea1000 cfb05284 cf95c000 00000001 cf95c000 60000013 00000001 cf95dee4 de80: cf870050 c01d7308 cf870010 cf870050 00000001 c0278b14 c0526f28 00000000 dea0: cf870050 ffff8e18 00000001 cf95dee4 00000000 c0274f7c cf870050 00000001 dec0: cf95dee4 cf1d8484 000000e0 c0276464 00000008 cf9c0000 00000007 c0276980 dee0: cf9c0000 00000064 00000008 cf1d8404 cf1d8400 c01cc05c 0000270a cf1d8504 df00: 00000023 cf1d8484 00000007 c01cc670 00000bdd 00000001 00000000 cf449e60 df20: cf1dde70 cf1d8400 bec33d18 cf1d8504 c0246f00 00000003 cf95c000 00000000 df40: bec33d4c c01cd078 00000003 cf1d8504 00000081 c01cbcb8 bec33d18 00000003 df60: bec33d18 c00a9034 00002000 c00a9c68 cf92fe00 00000003 c0246f00 cf92fe00 df80: 00000000 c00a9cb0 00000003 00000000 00008e70 00000000 b6f17000 00000036 dfa0: c000e484 c000e300 00008e70 00000000 00000003 c0246f00 bec33d18 bec33d18 dfc0: 00008e70 00000000 b6f17000 00000036 00000000 00000000 b6f6d000 bec33d4c dfe0: b6ea1bd0 bec33d0c 00008c9c b6ea1bdc 60000010 00000003 00000000 00000000 (_omap_device_enable_hwmods+0x20/0x34) (omap_device_enable+0x3c/0x50) (_od_runtime_resume+0x10/0x1c) (__rpm_callback+0x54/0x98) (rpm_callback+0x64/0x7c) (rpm_resume+0x434/0x554) (__pm_runtime_resume+0x48/0x74) (omap_i2c_xfer+0x28/0xe8) (__i2c_transfer+0x3c/0x78) (i2c_transfer+0x6c/0xc0) (i2c_master_send+0x38/0x48) (sha204p_send_command+0x60/0x9c) (sha204c_send_and_receive+0x5c/0x1e0) (sha204m_read+0x94/0xa0) (otp_do_read+0x50/0xa4) (vfs_ioctl+0x24/0x40) (do_vfs_ioctl+0x1b0/0x1c0) (sys_ioctl+0x38/0x54) (ret_fast_syscall+0x0/0x30) Code: e1a08002 ea000009 e598003c e592c05c (e7904003) Cc: stable@vger.kernel.org Signed-off-by: Jean-Philippe Fran=C3=A7ois <jp.francois@cynove.com> Acked-by: Kevin Hilman <khilman@linaro.org> [tony@atomide.com: updated description with oops] Signed-off-by: Tony Lindgren <tony@atomide.com>

i2c: suppress lockdep warning on delete_device Since commit 846f997 the following lockdep warning is thrown in case i2c device is removed (via delete_device sysfs attribute) which contains subdevices (e.g. i2c multiplexer): ============================================= [ INFO: possible recursive locking detected ] 3.8.7-0-sampleversion-fct #8 Tainted: G O --------------------------------------------- bash/3743 is trying to acquire lock: (s_active#110){++++.+}, at: [<ffffffff802b3048>] sysfs_hash_and_remove+0x58/0xc8 but task is already holding lock: (s_active#110){++++.+}, at: [<ffffffff802b3cb8>] sysfs_write_file+0xc8/0x208 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(s_active#110); lock(s_active#110); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by bash/3743: #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff802b3c3c>] sysfs_write_file+0x4c/0x208 #1: (s_active#110){++++.+}, at: [<ffffffff802b3cb8>] sysfs_write_file+0xc8/0x208 #2: (&adap->userspace_clients_lock/1){+.+.+.}, at: [<ffffffff80454a18>] i2c_sysfs_delete_device+0x90/0x238 #3: (&__lockdep_no_validate__){......}, at: [<ffffffff803dcc24>] device_release_driver+0x24/0x48 stack backtrace: Call Trace: [<ffffffff80575cc8>] dump_stack+0x8/0x34 [<ffffffff801b50fc>] __lock_acquire+0x161c/0x2110 [<ffffffff801b5c3c>] lock_acquire+0x4c/0x70 [<ffffffff802b60cc>] sysfs_addrm_finish+0x19c/0x1e0 [<ffffffff802b3048>] sysfs_hash_and_remove+0x58/0xc8 [<ffffffff802b7d8c>] sysfs_remove_group+0x64/0x148 [<ffffffff803d990c>] device_remove_attrs+0x9c/0x1a8 [<ffffffff803d9b1c>] device_del+0x104/0x1d8 [<ffffffff803d9c18>] device_unregister+0x28/0x70 [<ffffffff8045505c>] i2c_del_adapter+0x1cc/0x328 [<ffffffff8045802c>] i2c_del_mux_adapter+0x14/0x38 [<ffffffffc025c108>] pca954x_remove+0x90/0xe0 [pca954x] [<ffffffff804542f8>] i2c_device_remove+0x80/0xe8 [<ffffffff803dca9c>] __device_release_driver+0x74/0xf8 [<ffffffff803dcc2c>] device_release_driver+0x2c/0x48 [<ffffffff803dbc14>] bus_remove_device+0x13c/0x1d8 [<ffffffff803d9b24>] device_del+0x10c/0x1d8 [<ffffffff803d9c18>] device_unregister+0x28/0x70 [<ffffffff80454b08>] i2c_sysfs_delete_device+0x180/0x238 [<ffffffff802b3cd4>] sysfs_write_file+0xe4/0x208 [<ffffffff8023ddc4>] vfs_write+0xbc/0x160 [<ffffffff8023df6c>] SyS_write+0x54/0xd8 [<ffffffff8013d424>] handle_sys64+0x44/0x64 The problem is already known for USB and PCI subsystems. The reason is that delete_device attribute is defined statically in i2c-core.c and used for all devices in i2c subsystem. Discussion of original USB problem: http://lkml.indiana.edu/hypermail/linux/kernel/1204.3/01160.html Commit 356c05d introduced new macro to suppress lockdep warnings for this special case and included workaround for USB code. LKML discussion of the workaround: http://lkml.indiana.edu/hypermail/linux/kernel/1205.1/03634.html As i2c case is in principle the same, the same workaround could be used here. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

This manifested as grep failing psuedo-randomly: -------------->8--------------------- [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ ip address show lo | grep inet [ARCLinux]$ [ARCLinux]$ ip address show lo | grep inet inet 127.0.0.1/8 scope host lo -------------->8--------------------- ARC700 MMU provides fully orthogonal permission bits per page: Ur, Uw, Ux, Kr, Kw, Kx The user mode page permission templates used to have all Kernel mode access bits enabled. This caused a tricky race condition observed with uClibc buffered file read and UNIX pipes. 1. Read access to an anon mapped page in libc .bss: write-protected zero_page mapped: TLB Entry installed with Ur + K[rwx] 2. grep calls libc:getc() -> buffered read layer calls read(2) with the internal read buffer in same .bss page. The read() call is on STDIN which has been redirected to a pipe. read(2) => sys_read() => pipe_read() => copy_to_user() 3. Since page has Kernel-write permission (despite being user-mode write-protected), copy_to_user() suceeds w/o taking a MMU TLB-Miss Exception (page-fault for ARC). core-MM is unaware that kernel erroneously wrote to the reserved read-only zero-page (BUG #1) 4. Control returns to userspace which now does a write to same .bss page Since Linux MM is not aware that page has been modified by kernel, it simply reassigns a new writable zero-init page to mapping, loosing the prior write by kernel - effectively zero'ing out the libc read buffer under the hood - hence grep doesn't see right data (BUG #2) The fix is to make all kernel-mode access permissions mirror the user-mode ones. Note that the kernel still has full access to pages, when accessed directly (w/o MMU) - this fix ensures that kernel-mode access in copy_to_from() path uses the same faulting access model as for pure user accesses to keep MM fully aware of page state. The issue is peudo-random because it only shows up if the TLB entry installed in #1 is present at the time of #3. If it is evicted out, due to TLB pressure or some-such, then copy_to_user() does take a TLB Miss Exception, with a routine write-to-anon COW processing installing a fresh page for kernel writes and also usable as it is in userspace. Further the issue was dormant for so long as it depends on where the libc internal read buffer (in .bss) is mapped at runtime. If it happens to reside in file-backed data mapping of libc (in the page-aligned slack space trailing the file backed data), loader zero padding the slack space, does the early cow page replacement, setting things up at the very beginning itself. With gcc 4.8 based builds, the libc buffer got pushed out to a real anon mapping which triggers the issue. Reported-by: Anton Kolesov <akolesov@synopsys.com> Cc: <stable@vger.kernel.org> # 3.9 Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Got bellow lockdep warning during tests. It is false alarm though. [ 1184.479097] ============================================= [ 1184.479187] [ INFO: possible recursive locking detected ] [ 1184.479277] 3.10.0-rc3+ #13 Tainted: G C [ 1184.479355] --------------------------------------------- [ 1184.479444] mkdir/2215 is trying to acquire lock: [ 1184.479521] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre] [ 1184.479801] but task is already holding lock: [ 1184.479895] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.480101] other info that might help us debug this: [ 1184.480206] Possible unsafe locking scenario: [ 1184.480300] CPU0 [ 1184.480340] ---- [ 1184.480380] lock(&(&dentry->d_lock)->rlock); [ 1184.480458] lock(&(&dentry->d_lock)->rlock); [ 1184.480536] *** DEADLOCK *** [ 1184.480761] May be due to missing lock nesting notation [ 1184.480936] 4 locks held by mkdir/2215: [ 1184.481037] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b [ 1184.481273] #1: (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144 [ 1184.481513] #2: (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre] [ 1184.481778] #3: (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.482050] Signed-off-by: Peng Tao <tao.peng@emc.com>

Pull xfs update (#2) from Ben Myers: - add CONFIG_XFS_WARN, a step between zero debugging and CONFIG_XFS_DEBUG. - fix attrmulti and attrlist to fall back to vmalloc when kmalloc fails. * tag 'for-linus-v3.10-rc1-2' of git://oss.sgi.com/xfs/xfs: xfs: fallback to vmalloc for large buffers in xfs_compat_attrlist_by_handle xfs: fallback to vmalloc for large buffers in xfs_attrlist_by_handle xfs: introduce CONFIG_XFS_WARN

Got bellow lockdep warning during tests. It is false alarm though. [ 1184.479097] ============================================= [ 1184.479187] [ INFO: possible recursive locking detected ] [ 1184.479277] 3.10.0-rc3+ #13 Tainted: G C [ 1184.479355] --------------------------------------------- [ 1184.479444] mkdir/2215 is trying to acquire lock: [ 1184.479521] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre] [ 1184.479801] but task is already holding lock: [ 1184.479895] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.480101] other info that might help us debug this: [ 1184.480206] Possible unsafe locking scenario: [ 1184.480300] CPU0 [ 1184.480340] ---- [ 1184.480380] lock(&(&dentry->d_lock)->rlock); [ 1184.480458] lock(&(&dentry->d_lock)->rlock); [ 1184.480536] *** DEADLOCK *** [ 1184.480761] May be due to missing lock nesting notation [ 1184.480936] 4 locks held by mkdir/2215: [ 1184.481037] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b [ 1184.481273] #1: (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144 [ 1184.481513] #2: (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre] [ 1184.481778] #3: (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.482050] Signed-off-by: Peng Tao <tao.peng@emc.com>

Don't sleep in __fscache_maybe_release_page() if __GFP_FS is not set. This goes some way towards mitigating fscache deadlocking against ext4 by way of the allocator, eg: INFO: task flush-8:0:24427 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:0 D ffff88003e2b9fd8 0 24427 2 0x00000000 ffff88003e2b9138 0000000000000046 ffff880012e3a040 ffff88003e2b9fd8 0000000000011c80 ffff88003e2b9fd8 ffffffff81a10400 ffff880012e3a040 0000000000000002 ffff880012e3a040 ffff88003e2b9098 ffffffff8106dcf5 Call Trace: [<ffffffff8106dcf5>] ? __lock_is_held+0x31/0x53 [<ffffffff81219b61>] ? radix_tree_lookup_element+0xf4/0x12a [<ffffffff81454bed>] schedule+0x60/0x62 [<ffffffffa01d349c>] __fscache_wait_on_page_write+0x8b/0xa5 [fscache] [<ffffffff810498a8>] ? __init_waitqueue_head+0x4d/0x4d [<ffffffffa01d393a>] __fscache_maybe_release_page+0x30c/0x324 [fscache] [<ffffffffa01d369a>] ? __fscache_maybe_release_page+0x6c/0x324 [fscache] [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170 [<ffffffffa01fd7b2>] nfs_fscache_release_page+0x68/0x94 [nfs] [<ffffffffa01ef73e>] nfs_release_page+0x7e/0x86 [nfs] [<ffffffff810aa553>] try_to_release_page+0x32/0x3b [<ffffffff810b6c70>] shrink_page_list+0x535/0x71a [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170 [<ffffffff810b7352>] shrink_inactive_list+0x20a/0x2dd [<ffffffff81071a13>] ? mark_held_locks+0xbe/0xea [<ffffffff810b7a65>] shrink_lruvec+0x34c/0x3eb [<ffffffff810b7bd3>] do_try_to_free_pages+0xcf/0x355 [<ffffffff810b7fc8>] try_to_free_pages+0x9a/0xa1 [<ffffffff810b08d2>] __alloc_pages_nodemask+0x494/0x6f7 [<ffffffff810d9a07>] kmem_getpages+0x58/0x155 [<ffffffff810dc002>] fallback_alloc+0x120/0x1f3 [<ffffffff8106db23>] ? trace_hardirqs_off+0xd/0xf [<ffffffff810dbed3>] ____cache_alloc_node+0x177/0x186 [<ffffffff81162a6c>] ? ext4_init_io_end+0x1c/0x37 [<ffffffff810dc403>] kmem_cache_alloc+0xf1/0x176 [<ffffffff810b17ac>] ? test_set_page_writeback+0x101/0x113 [<ffffffff81162a6c>] ext4_init_io_end+0x1c/0x37 [<ffffffff81162ce4>] ext4_bio_write_page+0x20f/0x3af [<ffffffff8115cc02>] mpage_da_submit_io+0x26e/0x2f6 [<ffffffff811088e5>] ? __find_get_block_slow+0x38/0x133 [<ffffffff81161348>] mpage_da_map_and_submit+0x3a7/0x3bd [<ffffffff81161a60>] ext4_da_writepages+0x30d/0x426 [<ffffffff810b3359>] do_writepages+0x1c/0x2a [<ffffffff81102f4d>] __writeback_single_inode+0x3e/0xe5 [<ffffffff81103995>] writeback_sb_inodes+0x1bd/0x2f4 [<ffffffff81103b3b>] __writeback_inodes_wb+0x6f/0xb4 [<ffffffff81103c81>] wb_writeback+0x101/0x195 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170 [<ffffffff811043aa>] ? wb_do_writeback+0xaa/0x173 [<ffffffff8110434a>] wb_do_writeback+0x4a/0x173 [<ffffffff81071bbc>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81038554>] ? del_timer+0x4b/0x5b [<ffffffff811044e0>] bdi_writeback_thread+0x6d/0x147 [<ffffffff81104473>] ? wb_do_writeback+0x173/0x173 [<ffffffff81048fbc>] kthread+0xd0/0xd8 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55 [<ffffffff81456aac>] ret_from_fork+0x7c/0xb0 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55 2 locks held by flush-8:0/24427: #0: (&type->s_umount_key#41){.+.+..}, at: [<ffffffff810e3b73>] grab_super_passive+0x4c/0x76 #1: (jbd2_handle){+.+...}, at: [<ffffffff81190d81>] start_this_handle+0x475/0x4ea The problem here is that another thread, which is attempting to write the to-be-stored NFS page to the on-ext4 cache file is waiting for the journal lock, eg: INFO: task kworker/u:2:24437 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u:2 D ffff880039589768 0 24437 2 0x00000000 ffff8800395896d8 0000000000000046 ffff8800283bf040 ffff880039589fd8 0000000000011c80 ffff880039589fd8 ffff880039f0b040 ffff8800283bf040 0000000000000006 ffff8800283bf6b8 ffff880039589658 ffffffff81071a13 Call Trace: [<ffffffff81071a13>] ? mark_held_locks+0xbe/0xea [<ffffffff81455e73>] ? _raw_spin_unlock_irqrestore+0x3a/0x50 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170 [<ffffffff81071bbc>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81454bed>] schedule+0x60/0x62 [<ffffffff81190c23>] start_this_handle+0x317/0x4ea [<ffffffff810498a8>] ? __init_waitqueue_head+0x4d/0x4d [<ffffffff81190fcc>] jbd2__journal_start+0xb3/0x12e [<ffffffff81176606>] __ext4_journal_start_sb+0xb2/0xc6 [<ffffffff8115f137>] ext4_da_write_begin+0x109/0x233 [<ffffffff810a964d>] generic_file_buffered_write+0x11a/0x264 [<ffffffff811032cf>] ? __mark_inode_dirty+0x2d/0x1ee [<ffffffff810ab1ab>] __generic_file_aio_write+0x2a5/0x2d5 [<ffffffff810ab24a>] generic_file_aio_write+0x6f/0xd0 [<ffffffff81159a2c>] ext4_file_write+0x38c/0x3c4 [<ffffffff810e0915>] do_sync_write+0x91/0xd1 [<ffffffffa00a17f0>] cachefiles_write_page+0x26f/0x310 [cachefiles] [<ffffffffa01d470b>] fscache_write_op+0x21e/0x37a [fscache] [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e [<ffffffffa01d2479>] fscache_op_work_func+0x78/0xd7 [fscache] [<ffffffff8104455a>] process_one_work+0x232/0x3a8 [<ffffffff810444ff>] ? process_one_work+0x1d7/0x3a8 [<ffffffff81044ee0>] worker_thread+0x214/0x303 [<ffffffff81044ccc>] ? manage_workers+0x245/0x245 [<ffffffff81048fbc>] kthread+0xd0/0xd8 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55 [<ffffffff81456aac>] ret_from_fork+0x7c/0xb0 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55 4 locks held by kworker/u:2/24437: #0: (fscache_operation){.+.+.+}, at: [<ffffffff810444ff>] process_one_work+0x1d7/0x3a8 #1: ((&op->work)){+.+.+.}, at: [<ffffffff810444ff>] process_one_work+0x1d7/0x3a8 #2: (sb_writers#14){.+.+.+}, at: [<ffffffff810ab22c>] generic_file_aio_write+0x51/0xd0 #3: (&sb->s_type->i_mutex_key#19){+.+.+.}, at: [<ffffffff810ab236>] generic_file_aio_write+0x5b/0x fscache already tries to cancel pending stores, but it can't cancel a write for which I/O is already in progress. An alternative would be to accept writing garbage to the cache under extreme circumstances and to kill the afflicted cache object if we have to do this. However, we really need to know how strapped the allocator is before deciding to do that. Signed-off-by: David Howells <dhowells@redhat.com>

Under certain circumstances, spin_is_locked() is hardwired to 0 - even when the code would normally be in a locked section where it should return 1. This means it cannot be used for an assertion that checks that a spinlock is locked. Remove such usages from FS-Cache. The following oops might otherwise be observed: FS-Cache: Assertion failed BUG: failure at fs/fscache/operation.c:270/fscache_start_operations()! Kernel panic - not syncing: BUG! CPU: 0 PID: 10 Comm: kworker/u2:1 Not tainted 3.10.0-rc1-00133-ge7ebb75 #2 Workqueue: fscache_operation fscache_op_work_func [fscache] 7f091c48 603c8947 7f090000 7f9b1361 7f25f080 00000001 7f26d440 7f091c90 60299eb8 7f091d90 602951c5 7f26d440 3000000008 7f091da0 7f091cc0 7f091cd0 00000007 00000007 00000006 7f091ae0 00000010 0000010e 7f9af330 7f091ae0 Call Trace: 7f091c88: [<60299eb8>] dump_stack+0x17/0x19 7f091c98: [<602951c5>] panic+0xf4/0x1e9 7f091d38: [<6002b10e>] set_signals+0x1e/0x40 7f091d58: [<6005b89e>] __wake_up+0x4e/0x70 7f091d98: [<7f9aa003>] fscache_start_operations+0x43/0x50 [fscache] 7f091da8: [<7f9aa1e3>] fscache_op_complete+0x1d3/0x220 [fscache] 7f091db8: [<60082985>] unlock_page+0x55/0x60 7f091de8: [<7fb25bb0>] cachefiles_read_copier+0x250/0x330 [cachefiles] 7f091e58: [<7f9ab03c>] fscache_op_work_func+0xac/0x120 [fscache] 7f091e88: [<6004d5b0>] process_one_work+0x250/0x3a0 7f091ef8: [<6004edc7>] worker_thread+0x177/0x2a0 7f091f38: [<6004ec50>] worker_thread+0x0/0x2a0 7f091f58: [<60054418>] kthread+0xd8/0xe0 7f091f68: [<6005bb27>] finish_task_switch.isra.64+0x37/0xa0 7f091fd8: [<600185cf>] new_thread_handler+0x8f/0xb0 Reported-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: David Howells <dhowells@redhat.com>

This commit fixes a lockdep-detected deadlock by moving a wake_up() call out from a rnp->lock critical section. Please see below for the long version of this story. On Tue, 2013-05-28 at 16:13 -0400, Dave Jones wrote: > [12572.705832] ====================================================== > [12572.750317] [ INFO: possible circular locking dependency detected ] > [12572.796978] 3.10.0-rc3+ #39 Not tainted > [12572.833381] ------------------------------------------------------- > [12572.862233] trinity-child17/31341 is trying to acquire lock: > [12572.870390] (rcu_node_0){..-.-.}, at: [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12572.878859] > but task is already holding lock: > [12572.894894] (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0 > [12572.903381] > which lock already depends on the new lock. > > [12572.927541] > the existing dependency chain (in reverse order) is: > [12572.943736] > -> #4 (&ctx->lock){-.-...}: > [12572.960032] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12572.968337] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12572.976633] [<ffffffff8113c987>] __perf_event_task_sched_out+0x2e7/0x5e0 > [12572.984969] [<ffffffff81088953>] perf_event_task_sched_out+0x93/0xa0 > [12572.993326] [<ffffffff816ea0bf>] __schedule+0x2cf/0x9c0 > [12573.001652] [<ffffffff816eacfe>] schedule_user+0x2e/0x70 > [12573.009998] [<ffffffff816ecd64>] retint_careful+0x12/0x2e > [12573.018321] > -> #3 (&rq->lock){-.-.-.}: > [12573.034628] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.042930] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.051248] [<ffffffff8108e6a7>] wake_up_new_task+0xb7/0x260 > [12573.059579] [<ffffffff810492f5>] do_fork+0x105/0x470 > [12573.067880] [<ffffffff81049686>] kernel_thread+0x26/0x30 > [12573.076202] [<ffffffff816cee63>] rest_init+0x23/0x140 > [12573.084508] [<ffffffff81ed8e1f>] start_kernel+0x3f1/0x3fe > [12573.092852] [<ffffffff81ed856f>] x86_64_start_reservations+0x2a/0x2c > [12573.101233] [<ffffffff81ed863d>] x86_64_start_kernel+0xcc/0xcf > [12573.109528] > -> #2 (&p->pi_lock){-.-.-.}: > [12573.125675] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.133829] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.141964] [<ffffffff8108e881>] try_to_wake_up+0x31/0x320 > [12573.150065] [<ffffffff8108ebe2>] default_wake_function+0x12/0x20 > [12573.158151] [<ffffffff8107bbf8>] autoremove_wake_function+0x18/0x40 > [12573.166195] [<ffffffff81085398>] __wake_up_common+0x58/0x90 > [12573.174215] [<ffffffff81086909>] __wake_up+0x39/0x50 > [12573.182146] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.190119] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0 > [12573.198023] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930 > [12573.205860] [<ffffffff8107a91d>] kthread+0xed/0x100 > [12573.213656] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0 > [12573.221379] > -> #1 (&rsp->gp_wq){..-.-.}: > [12573.236329] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.243783] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.251178] [<ffffffff810868f3>] __wake_up+0x23/0x50 > [12573.258505] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.265891] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0 > [12573.273248] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930 > [12573.280564] [<ffffffff8107a91d>] kthread+0xed/0x100 > [12573.287807] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0 Notice the above call chain. rcu_start_future_gp() is called with the rnp->lock held. Then it calls rcu_start_gp_advance, which does a wakeup. You can't do wakeups while holding the rnp->lock, as that would mean that you could not do a rcu_read_unlock() while holding the rq lock, or any lock that was taken while holding the rq lock. This is because... (See below). > [12573.295067] > -> #0 (rcu_node_0){..-.-.}: > [12573.309293] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0 > [12573.316568] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.323825] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.331081] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12573.338377] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0 > [12573.345648] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0 > [12573.352942] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0 > [12573.360211] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0 > [12573.367514] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10 > [12573.374816] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2 Notice the above trace. perf took its own ctx->lock, which can be taken while holding the rq lock. While holding this lock, it did a rcu_read_unlock(). The perf_lock_task_context() basically looks like: rcu_read_lock(); raw_spin_lock(ctx->lock); rcu_read_unlock(); Now, what looks to have happened, is that we scheduled after taking that first rcu_read_lock() but before taking the spin lock. When we scheduled back in and took the ctx->lock, the following rcu_read_unlock() triggered the "special" code. The rcu_read_unlock_special() takes the rnp->lock, which gives us a possible deadlock scenario. CPU0 CPU1 CPU2 ---- ---- ---- rcu_nocb_kthread() lock(rq->lock); lock(ctx->lock); lock(rnp->lock); wake_up(); lock(rq->lock); rcu_read_unlock(); rcu_read_unlock_special(); lock(rnp->lock); lock(ctx->lock); **** DEADLOCK **** > [12573.382068] > other info that might help us debug this: > > [12573.403229] Chain exists of: > rcu_node_0 --> &rq->lock --> &ctx->lock > > [12573.424471] Possible unsafe locking scenario: > > [12573.438499] CPU0 CPU1 > [12573.445599] ---- ---- > [12573.452691] lock(&ctx->lock); > [12573.459799] lock(&rq->lock); > [12573.467010] lock(&ctx->lock); > [12573.474192] lock(rcu_node_0); > [12573.481262] > *** DEADLOCK *** > > [12573.501931] 1 lock held by trinity-child17/31341: > [12573.508990] #0: (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0 > [12573.516475] > stack backtrace: > [12573.530395] CPU: 1 PID: 31341 Comm: trinity-child17 Not tainted 3.10.0-rc3+ #39 > [12573.545357] ffffffff825b4f90 ffff880219f1dbc0 ffffffff816e375b ffff880219f1dc00 > [12573.552868] ffffffff816dfa5d ffff880219f1dc50 ffff88023ce4d1f8 ffff88023ce4ca40 > [12573.560353] 0000000000000001 0000000000000001 ffff88023ce4d1f8 ffff880219f1dcc0 > [12573.567856] Call Trace: > [12573.575011] [<ffffffff816e375b>] dump_stack+0x19/0x1b > [12573.582284] [<ffffffff816dfa5d>] print_circular_bug+0x200/0x20f > [12573.589637] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0 > [12573.596982] [<ffffffff810918f5>] ? sched_clock_cpu+0xb5/0x100 > [12573.604344] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.611652] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.619030] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.626331] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.633671] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12573.640992] [<ffffffff811390ed>] ? perf_lock_task_context+0x7d/0x2d0 > [12573.648330] [<ffffffff810b429e>] ? put_lock_stats.isra.29+0xe/0x40 > [12573.655662] [<ffffffff813095a0>] ? delay_tsc+0x90/0xe0 > [12573.662964] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0 > [12573.670276] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0 > [12573.677622] [<ffffffff81139070>] ? __perf_event_enable+0x370/0x370 > [12573.684981] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0 > [12573.692358] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0 > [12573.699753] [<ffffffff8108cd9d>] ? get_parent_ip+0xd/0x50 > [12573.707135] [<ffffffff810b71fd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 > [12573.714599] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10 > [12573.721996] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2 This commit delays the wakeup via irq_work(), which is what perf and ftrace use to perform wakeups in critical sections. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Got bellow lockdep warning during tests. It is false alarm though. [ 1184.479097] ============================================= [ 1184.479187] [ INFO: possible recursive locking detected ] [ 1184.479277] 3.10.0-rc3+ #13 Tainted: G C [ 1184.479355] --------------------------------------------- [ 1184.479444] mkdir/2215 is trying to acquire lock: [ 1184.479521] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre] [ 1184.479801] but task is already holding lock: [ 1184.479895] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.480101] other info that might help us debug this: [ 1184.480206] Possible unsafe locking scenario: [ 1184.480300] CPU0 [ 1184.480340] ---- [ 1184.480380] lock(&(&dentry->d_lock)->rlock); [ 1184.480458] lock(&(&dentry->d_lock)->rlock); [ 1184.480536] *** DEADLOCK *** [ 1184.480761] May be due to missing lock nesting notation [ 1184.480936] 4 locks held by mkdir/2215: [ 1184.481037] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b [ 1184.481273] #1: (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144 [ 1184.481513] #2: (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre] [ 1184.481778] #3: (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.482050] Signed-off-by: Peng Tao <tao.peng@emc.com>

Got bellow lockdep warning during tests. It is false alarm though. [ 1184.479097] ============================================= [ 1184.479187] [ INFO: possible recursive locking detected ] [ 1184.479277] 3.10.0-rc3+ #13 Tainted: G C [ 1184.479355] --------------------------------------------- [ 1184.479444] mkdir/2215 is trying to acquire lock: [ 1184.479521] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre] [ 1184.479801] but task is already holding lock: [ 1184.479895] (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.480101] other info that might help us debug this: [ 1184.480206] Possible unsafe locking scenario: [ 1184.480300] CPU0 [ 1184.480340] ---- [ 1184.480380] lock(&(&dentry->d_lock)->rlock); [ 1184.480458] lock(&(&dentry->d_lock)->rlock); [ 1184.480536] *** DEADLOCK *** [ 1184.480761] May be due to missing lock nesting notation [ 1184.480936] 4 locks held by mkdir/2215: [ 1184.481037] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b [ 1184.481273] #1: (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144 [ 1184.481513] #2: (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre] [ 1184.481778] #3: (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre] [ 1184.482050] Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following backtrace is reported with CONFIG_PROVE_RCU: drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/0:1/56: #0: (events){.+.+.+}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #1: ((&wfc.work)){+.+.+.}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0 #2: (device_mutex){+.+.+.}, at: [<ffffffffa0148dd8>] ib_register_device+0x38/0x220 [ib_core] #3: (&(&dev->lk_table.lock)->rlock){......}, at: [<ffffffffa017e81c>] qib_alloc_lkey+0x3c/0x1b0 [ib_qib] stack backtrace: Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6 Call Trace: [<ffffffff810c0b85>] lockdep_rcu_suspicious+0xe5/0x130 [<ffffffffa017e8e1>] qib_alloc_lkey+0x101/0x1b0 [ib_qib] [<ffffffffa0184886>] qib_get_dma_mr+0xa6/0xd0 [ib_qib] [<ffffffffa01461aa>] ib_get_dma_mr+0x1a/0x50 [ib_core] [<ffffffffa01678dc>] ib_mad_port_open+0x12c/0x390 [ib_mad] [<ffffffff810c2c55>] ? trace_hardirqs_on_caller+0x105/0x190 [<ffffffffa0167b92>] ib_mad_init_device+0x52/0x110 [ib_mad] [<ffffffffa01917c0>] ? sl2vl_attr_show+0x30/0x30 [ib_qib] [<ffffffffa0148f49>] ib_register_device+0x1a9/0x220 [ib_core] [<ffffffffa01b1685>] qib_register_ib_device+0x735/0xa40 [ib_qib] [<ffffffff8106ba98>] ? mod_timer+0x118/0x220 [<ffffffffa017d425>] qib_init_one+0x1e5/0x400 [ib_qib] [<ffffffff812ce86e>] local_pci_probe+0x4e/0x90 [<ffffffff81078118>] work_for_cpu_fn+0x18/0x30 [<ffffffff8107a566>] process_one_work+0x1d6/0x4a0 [<ffffffff8107a4f5>] ? process_one_work+0x165/0x4a0 [<ffffffff8107c9c9>] worker_thread+0x119/0x370 [<ffffffff8107c8b0>] ? manage_workers+0x180/0x180 [<ffffffff8108294e>] kthread+0xee/0x100 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 [<ffffffff815c04ac>] ret_from_fork+0x7c/0xb0 [<ffffffff81082860>] ? __init_kthread_worker+0x70/0x70 Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer() vs. rcu_dereference(). Reported-by: Jay Fenlason <fenlason@redhat.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>

The MC8305 module got an additional entry added based solely on information from a Windows driver *.inf file. We now have the actual descriptor layout from one of these modules, and it consists of two alternate configurations where cfg #1 is a normal Gobi 2k layout and cfg #2 is MBIM only, using interface numbers 5 and 6 for MBIM control and data. The extra Windows driver entry for interface number 5 was most likely a bug. Deleting the bogus entry to avoid unnecessary qmi_wwan probe failures when using the MBIM configuration. Reported-by: Lana Black <sickmind@lavabit.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>

@Write

…/kernel/git/vgupta/arc Pull first batch of ARC changes from Vineet Gupta: "There's a second bunch to follow next week - which depends on commits on other trees (irq/net). I'd have preferred the accompanying ARC change via respective trees, but it didn't workout somehow. Highlights of changes: - Continuation of ARC MM changes from 3.10 including zero page optimization Setting pagecache pages dirty by default Non executable stack by default Reducing dcache flushes for aliasing VIPT config - Long overdue rework of pt_regs machinery - removing the unused word gutters and adding ECR register to baseline (helps cleanup lot of low level code) - Support for ARC gcc 4.8 - Few other preventive fixes, cosmetics, usage of Kconfig helper.. The diffstat is larger than normal primarily because of arcregs.h header split as well as beautification of macros in entry.h" * tag 'arc-v3.11-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (32 commits) ARC: warn on improper stack unwind FDE entries arc: delete __cpuinit usage from all arc files ARC: [tlb-miss] Fix bug with CONFIG_ARC_DBG_TLB_MISS_COUNT ARC: [tlb-miss] Extraneous PTE bit testing/setting ARC: Adjustments for gcc 4.8 ARC: Setup Vector Table Base in early boot ARC: Remove explicit passing around of ECR ARC: pt_regs update #5: Use real ECR for pt_regs->event vs. synth values ARC: stop using pt_regs->orig_r8 ARC: pt_regs update #4: r25 saved/restored unconditionally ARC: K/U SP saved from one location in stack switching macro ARC: Entry Handler tweaks: Simplify branch for in-kernel preemption ARC: Entry Handler tweaks: Avoid hardcoded LIMMS for ECR values ARC: Increase readability of entry handlers ARC: pt_regs update #3: Remove unused gutter at start of callee_regs ARC: pt_regs update #2: Remove unused gutter at start of pt_regs ARC: pt_regs update #1: Align pt_regs end with end of kernel stack page ARC: pt_regs update #0: remove kernel stack canary ARC: [mm] Remove @Write argument to do_page_fault() ARC: [mm] Make stack/heap Non-executable by default ...

This was found when using pwm-led on am33xx and enable heartbeat trigger. [ 808.624876] ================================= [ 808.629443] [ INFO: inconsistent lock state ] [ 808.634021] 3.9.0 #2 Not tainted [ 808.637415] --------------------------------- [ 808.641981] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 808.648288] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 808.653494] (prepare_lock){+.?.+.}, at: [<c027c211>] clk_unprepare+0x15/0x24 [ 808.661040] {SOFTIRQ-ON-W} state was registered at: [ 808.666155] [<c004ec4d>] __lock_acquire+0x411/0x824 [ 808.671465] [<c004f359>] lock_acquire+0x41/0x50 [ 808.676412] [<c039ee9d>] mutex_lock_nested+0x31/0x1d8 [ 808.681912] [<c027c275>] clk_prepare+0x15/0x28 [ 808.686764] [<c0590c6b>] _init+0x117/0x1e0 [ 808.691256] [<c0019ef9>] omap_hwmod_for_each+0x29/0x3c [ 808.696842] [<c0591107>] __omap_hwmod_setup_all+0x17/0x2c [ 808.702696] [<c0008653>] do_one_initcall+0xc3/0x10c [ 808.708017] [<c058a627>] kernel_init_freeable+0xa7/0x134 [ 808.713778] [<c039a543>] kernel_init+0x7/0x98 [ 808.718544] [<c000cd95>] ret_from_fork+0x11/0x3c [ 808.723583] irq event stamp: 1379172 [ 808.727328] hardirqs last enabled at (1379172): [<c03a0759>] _raw_spin_unlock_irqrestore+0x21/0x30 [ 808.736828] hardirqs last disabled at (1379171): [<c03a03c3>] _raw_spin_lock_irqsave+0x13/0x38 [ 808.745876] softirqs last enabled at (1379164): [<c002ae5d>] irq_enter+0x49/0x4c [ 808.753747] softirqs last disabled at (1379165): [<c002aec3>] irq_exit+0x63/0x88 [ 808.761518] [ 808.761518] other info that might help us debug this: [ 808.768373] Possible unsafe locking scenario: [ 808.768373] [ 808.774578] CPU0 [ 808.777141] ---- [ 808.779705] lock(prepare_lock); [ 808.783186] <Interrupt> [ 808.785929] lock(prepare_lock); [ 808.789595] [ 808.789595] *** DEADLOCK *** [ 808.789595] [ 808.795805] 1 lock held by swapper/0: [ 808.799643] #0: (((&heartbeat_data->timer))){+.-...}, at: [<c002e204>] call_timer_fn+0x0/0x90 [ 808.808814] [ 808.808814] stack backtrace: [ 808.813402] [<c000ff19>] (unwind_backtrace+0x1/0x98) from [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) [ 808.823721] [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) from [<c004e595>] (mark_lock+0x18d/0x434) [ 808.833669] [<c004e595>] (mark_lock+0x18d/0x434) from [<c004ec1d>] (__lock_acquire+0x3e1/0x824) [ 808.842803] [<c004ec1d>] (__lock_acquire+0x3e1/0x824) from [<c004f359>] (lock_acquire+0x41/0x50) [ 808.852031] [<c004f359>] (lock_acquire+0x41/0x50) from [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) [ 808.861433] [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) from [<c027c211>] (clk_unprepare+0x15/0x24) [ 808.870930] [<c027c211>] (clk_unprepare+0x15/0x24) from [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) [ 808.880431] [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) from [<c019f29f>] (pwm_disable+0x27/0x28) [ 808.889751] [<c019f29f>] (pwm_disable+0x27/0x28) from [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) [ 808.899431] [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) from [<c002e249>] (call_timer_fn+0x45/0x90) [ 808.909288] [<c002e249>] (call_timer_fn+0x45/0x90) from [<c002e399>] (run_timer_softirq+0x105/0x17c) [ 808.918884] [<c002e399>] (run_timer_softirq+0x105/0x17c) from [<c002abc5>] (__do_softirq+0xa5/0x150) [ 808.928486] [<c002abc5>] (__do_softirq+0xa5/0x150) from [<c002aec3>] (irq_exit+0x63/0x88) [ 808.937098] [<c002aec3>] (irq_exit+0x63/0x88) from [<c000d599>] (handle_IRQ+0x21/0x54) [ 808.945415] [<c000d599>] (handle_IRQ+0x21/0x54) from [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) [ 808.954900] [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) from [<c000c7ff>] (__irq_svc+0x3f/0x64) [ 808.964287] Exception stack(0xc05b1f68 to 0xc05b1fb0) [ 808.969587] 1f60: 00000001 00000001 00000000 00000000 c05b0000 c0619748 [ 808.978158] 1f80: c05b0000 c05b0000 c0619748 413fc082 00000000 00000000 01000000 c05b1fb0 [ 808.986719] 1fa0: c004f989 c000d6f0 400f0033 ffffffff [ 808.992024] [<c000c7ff>] (__irq_svc+0x3f/0x64) from [<c000d6f0>] (cpu_idle+0x60/0x98) [ 809.000250] [<c000d6f0>] (cpu_idle+0x60/0x98) from [<c058a535>] (start_kernel+0x1e9/0x234) Remove non atomic clk api calls and use only atomic for enable/disable because can be called from atomic context (led_heartbeat_function is timer callback). Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context. This is wrong for the following scenario: - HW context having HW and SW event - HW event got removed (closed) - SW event stays in HW context as the only event and its pmu is used to clone the child context The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below. Fixing this by using parent context pmu object to clone from child context. Addresses the following warning reported by Vince Weaver: [ 2716.472065] ------------[ cut here ]------------ [ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x) [ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn [ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2 [ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2 [ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18 [ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad [ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550 [ 2716.476035] Call Trace: [ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70 [ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f [ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194 [ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c [ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394 [ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98 [ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad [ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1 [ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432 [ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141 [ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90 [ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118 [ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c [ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6 [ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d [ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78 [ 2716.476035] ---[ end trace 827178d8a5966c3d ]--- Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

Jiri managed to trigger this warning: [] ====================================================== [] [ INFO: possible circular locking dependency detected ] [] 3.10.0+ #228 Tainted: G W [] ------------------------------------------------------- [] p/6613 is trying to acquire lock: [] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 [] [] but task is already holding lock: [] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 [] [] which lock already depends on the new lock. [] [] the existing dependency chain (in reverse order) is: [] [] -> #4 (&ctx->lock){-.-...}: [] -> #3 (&rq->lock){-.-.-.}: [] -> #2 (&p->pi_lock){-.-.-.}: [] -> #1 (&rnp->nocb_gp_wq[1]){......}: [] -> #0 (rcu_node_0){..-...}: Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible. Therefore solve it by making the entire RCU read side non-preemptible. Also pull out the retry from under the non-preempt to play nice with RT. Reported-by: Jiri Olsa <jolsa@redhat.com> Helped-out-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>

commit 2f7021a "cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work()" caused a regression in CPU hotplug, because it lead to a deadlock between cpufreq governor worker thread and the CPU hotplug writer task. Lockdep splat corresponding to this deadlock is shown below: [ 60.277396] ====================================================== [ 60.277400] [ INFO: possible circular locking dependency detected ] [ 60.277407] 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 Not tainted [ 60.277411] ------------------------------------------------------- [ 60.277417] bash/2225 is trying to acquire lock: [ 60.277422] ((&(&j_cdbs->work)->work)){+.+...}, at: [<ffffffff810621b5>] flush_work+0x5/0x280 [ 60.277444] but task is already holding lock: [ 60.277449] (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.277465] which lock already depends on the new lock. [ 60.277472] the existing dependency chain (in reverse order) is: [ 60.277477] -> #2 (cpu_hotplug.lock){+.+.+.}: [ 60.277490] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277503] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277514] [<ffffffff81042cbc>] get_online_cpus+0x3c/0x60 [ 60.277522] [<ffffffff814b842a>] gov_queue_work+0x2a/0xb0 [ 60.277532] [<ffffffff814b7891>] cs_dbs_timer+0xc1/0xe0 [ 60.277543] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277552] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277560] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277569] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277580] -> #1 (&j_cdbs->timer_mutex){+.+...}: [ 60.277592] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277600] [<ffffffff815b6157>] mutex_lock_nested+0x67/0x410 [ 60.277608] [<ffffffff814b785d>] cs_dbs_timer+0x8d/0xe0 [ 60.277616] [<ffffffff8106302d>] process_one_work+0x1cd/0x6a0 [ 60.277624] [<ffffffff81063d31>] worker_thread+0x121/0x3a0 [ 60.277633] [<ffffffff8106ae2b>] kthread+0xdb/0xe0 [ 60.277640] [<ffffffff815bb96c>] ret_from_fork+0x7c/0xb0 [ 60.277649] -> #0 ((&(&j_cdbs->work)->work)){+.+...}: [ 60.277661] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.277669] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.277677] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.277685] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.277693] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.277701] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.277709] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.277719] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.277728] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.277737] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.277747] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.277759] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.277768] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.277779] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.277788] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.277796] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.277806] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.277818] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.277826] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.277834] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.277842] other info that might help us debug this: [ 60.277848] Chain exists of: (&(&j_cdbs->work)->work) --> &j_cdbs->timer_mutex --> cpu_hotplug.lock [ 60.277864] Possible unsafe locking scenario: [ 60.277869] CPU0 CPU1 [ 60.277873] ---- ---- [ 60.277877] lock(cpu_hotplug.lock); [ 60.277885] lock(&j_cdbs->timer_mutex); [ 60.277892] lock(cpu_hotplug.lock); [ 60.277900] lock((&(&j_cdbs->work)->work)); [ 60.277907] *** DEADLOCK *** [ 60.277915] 6 locks held by bash/2225: [ 60.277919] #0: (sb_writers#6){.+.+.+}, at: [<ffffffff81168173>] vfs_write+0x1c3/0x1f0 [ 60.277937] #1: (&buffer->mutex){+.+.+.}, at: [<ffffffff811d9e3c>] sysfs_write_file+0x3c/0x150 [ 60.277954] #2: (s_active#61){.+.+.+}, at: [<ffffffff811d9ec3>] sysfs_write_file+0xc3/0x150 [ 60.277972] #3: (x86_cpu_hotplug_driver_mutex){+.+...}, at: [<ffffffff81024cf7>] cpu_hotplug_driver_lock+0x17/0x20 [ 60.277990] #4: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff815a0d32>] cpu_down+0x22/0x50 [ 60.278007] #5: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81042d8b>] cpu_hotplug_begin+0x2b/0x60 [ 60.278023] stack backtrace: [ 60.278031] CPU: 3 PID: 2225 Comm: bash Not tainted 3.10.0-rc7-dbg-01385-g241fd04-dirty #1744 [ 60.278037] Hardware name: Acer Aspire 5741G /Aspire 5741G , BIOS V1.20 02/08/2011 [ 60.278042] ffffffff8204e110 ffff88014df6b9f8 ffffffff815b3d90 ffff88014df6ba38 [ 60.278055] ffffffff815b0a8d ffff880150ed3f60 ffff880150ed4770 3871c4002c8980b2 [ 60.278068] ffff880150ed4748 ffff880150ed4770 ffff880150ed3f60 ffff88014df6bb00 [ 60.278081] Call Trace: [ 60.278091] [<ffffffff815b3d90>] dump_stack+0x19/0x1b [ 60.278101] [<ffffffff815b0a8d>] print_circular_bug+0x2b6/0x2c5 [ 60.278111] [<ffffffff810ab826>] __lock_acquire+0x1766/0x1d30 [ 60.278123] [<ffffffff81067e08>] ? __kernel_text_address+0x58/0x80 [ 60.278134] [<ffffffff810ac6d4>] lock_acquire+0xa4/0x200 [ 60.278142] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278151] [<ffffffff810621ed>] flush_work+0x3d/0x280 [ 60.278159] [<ffffffff810621b5>] ? flush_work+0x5/0x280 [ 60.278169] [<ffffffff810a9b14>] ? mark_held_locks+0x94/0x140 [ 60.278178] [<ffffffff81062d77>] ? __cancel_work_timer+0x77/0x120 [ 60.278188] [<ffffffff810a9cbd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 60.278196] [<ffffffff81062d8a>] __cancel_work_timer+0x8a/0x120 [ 60.278206] [<ffffffff81062e53>] cancel_delayed_work_sync+0x13/0x20 [ 60.278214] [<ffffffff814b89d9>] cpufreq_governor_dbs+0x529/0x6f0 [ 60.278225] [<ffffffff814b76a7>] cs_cpufreq_governor_dbs+0x17/0x20 [ 60.278234] [<ffffffff814b5df8>] __cpufreq_governor+0x48/0x100 [ 60.278244] [<ffffffff814b6b80>] __cpufreq_remove_dev.isra.14+0x80/0x3c0 [ 60.278255] [<ffffffff815adc0d>] cpufreq_cpu_callback+0x38/0x4c [ 60.278265] [<ffffffff81071a4d>] notifier_call_chain+0x5d/0x110 [ 60.278275] [<ffffffff81071b0e>] __raw_notifier_call_chain+0xe/0x10 [ 60.278284] [<ffffffff815a0a68>] _cpu_down+0x88/0x330 [ 60.278292] [<ffffffff81024cf7>] ? cpu_hotplug_driver_lock+0x17/0x20 [ 60.278302] [<ffffffff815a0d46>] cpu_down+0x36/0x50 [ 60.278311] [<ffffffff815a2748>] store_online+0x98/0xd0 [ 60.278320] [<ffffffff81452a28>] dev_attr_store+0x18/0x30 [ 60.278329] [<ffffffff811d9edb>] sysfs_write_file+0xdb/0x150 [ 60.278337] [<ffffffff8116806d>] vfs_write+0xbd/0x1f0 [ 60.278347] [<ffffffff81185950>] ? fget_light+0x320/0x4b0 [ 60.278355] [<ffffffff811686fc>] SyS_write+0x4c/0xa0 [ 60.278364] [<ffffffff815bbbbe>] tracesys+0xd0/0xd5 [ 60.280582] smpboot: CPU 1 is now offline The intention of that commit was to avoid warnings during CPU hotplug, which indicated that offline CPUs were getting IPIs from the cpufreq governor's work items. But the real root-cause of that problem was commit a66b2e5 (cpufreq: Preserve sysfs files across suspend/resume) because it totally skipped all the cpufreq callbacks during CPU hotplug in the suspend/resume path, and hence it never actually shut down the cpufreq governor's worker threads during CPU offline in the suspend/resume path. Reflecting back, the reason why we never suspected that commit as the root-cause earlier, was that the original issue was reported with just the halt command and nobody had brought in suspend/resume to the equation. The reason for _that_ in turn, as it turns out, is that earlier halt/shutdown was being done by disabling non-boot CPUs while tasks were frozen, just like suspend/resume.... but commit cf7df37 (reboot: migrate shutdown/reboot to boot cpu) which came somewhere along that very same time changed that logic: shutdown/halt no longer takes CPUs offline. Thus, the test-cases for reproducing the bug were vastly different and thus we went totally off the trail. Overall, it was one hell of a confusion with so many commits affecting each other and also affecting the symptoms of the problems in subtle ways. Finally, now since the original problematic commit (a66b2e5) has been completely reverted, revert this intermediate fix too (2f7021a), to fix the CPU hotplug deadlock. Phew! Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Peter Wu <lekensteyn@gmail.com> Cc: 3.10+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commits 6a1c068 and 9356b53, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60 [<ffffffff812734b4>] ? kobject_add+0x44/0x70 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0 [<ffffffff8134b389>] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb #9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. CC: <stable@vger.kernel.org> Reported-by: chayang <chayang@redhat.com> Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com> Reported-by: FuXiangChun <xfu@redhat.com> Reported-by: Qunfang Zhang <qzhang@redhat.com> Reported-by: Sibiao Luo <sluo@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

…/git/linville/wireless John W. Linville says: ==================== This pull request is intended for the 3.11 stream. It is a bit larger than usual, as it includes pulls from most of my feeder trees as well... For the Bluetooth bits, Gustavo says: "A few fixes and devices ID additions for 3.11: * There are 4 new ath3k device ids * Fixed stack memory usage in ath3k. * Fixed the init process of BlueFRITZ! devices, they were failing to init due to an unsupported command we sent. * Fixed wrong use of PTR_ERR in btusb code that was preventing intel devices to work properly. * Fixed race condition between hci_register_dev() and hci_dev_open() that could cause a NULL pointer dereference. * Fixed race condition that could call hci_req_cmd_complete() and make some devices to fail as showed in the log added to the commit message." Regarding the NFC bits, Samuel says: "We have: 1) A build failure fix for the NCI SPI transport layer due to a missing CRC_CCITT Kconfig dependency. 2) A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11 merge window but the typical terminology for loading a firmware to a target is firmware download rather than upload. In order to avoid any confusion in a file exported to userspace, we rename this command to CMD_FW_DOWNLOAD." Samuel's item #2 isn't strictly a fix, but it seems safe and should avoid confusion in the future. As for the mac80211 bits, Johannes says: "I only have three fixes this time, a fix for a suspend regression, a patch correcting the initiator in regulatory code and one fix for mesh station powersave." With respect to the iwlwifi bits, Johannes says: "We have a scan fix for passive channels, a new PCI device ID for an old device, a NIC reset fix, an RF-Kill fix, a fix for powersave when GO interfaces are present as well as an aggregation session fix (for a corner case) and a workaround for a firmware design issue - it only supports a single GTK in D3." Bringing-up the rear with the Atheros trees, Kalle says: "Geert Uytterhoeven fixed an ath10k build problem when NO_DMA=y. I added a missing MAINTAINERS entry for ath10k and updated ath6kl git tree location." Along with the above... Arend van Spriel fixes a brcmfmac WARNING when unplugging the device. Avinash Patil proves a couple of minor mwifiex fixes relating to P2P mode. Luciano Coelho updates the MAINTAINERS entry for the wilink drivers. Stanislaw Gruszka brings an rt2x00 fix for a queue start/stop problem. Stone Piao fixes another mwifiex problem, a command timeout related to P2P mode. Tomasz Moń corrects an endian problem in mwifiex. I'll remind my feeder maintainers to slowdown the patchflow. Beyond that, please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

We met lockdep warning when enable and disable the bearer for commands such as: tipc-config -netid=1234 -addr=1.1.3 -be=eth:eth0 tipc-config -netid=1234 -addr=1.1.3 -bd=eth:eth0 --------------------------------------------------- [ 327.693595] ====================================================== [ 327.693994] [ INFO: possible circular locking dependency detected ] [ 327.694519] 3.11.0-rc3-wwd-default #4 Tainted: G O [ 327.694882] ------------------------------------------------------- [ 327.695385] tipc-config/5825 is trying to acquire lock: [ 327.695754] (((timer))#2){+.-...}, at: [<ffffffff8105be80>] del_timer_sync+0x0/0xd0 [ 327.696018] [ 327.696018] but task is already holding lock: [ 327.696018] (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+ 0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] which lock already depends on the new lock. [ 327.696018] [ 327.696018] [ 327.696018] the existing dependency chain (in reverse order) is: [ 327.696018] [ 327.696018] -> #1 (&(&b_ptr->lock)->rlock){+.-...}: [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff814d65b1>] _raw_spin_lock_bh+0x41/0x80 [ 327.696018] [<ffffffffa02c5d48>] disc_timeout+0x18/0xd0 [tipc] [ 327.696018] [<ffffffff8105b92a>] call_timer_fn+0xda/0x1e0 [ 327.696018] [<ffffffff8105bcd7>] run_timer_softirq+0x2a7/0x2d0 [ 327.696018] [<ffffffff8105379a>] __do_softirq+0x16a/0x2e0 [ 327.696018] [<ffffffff81053a35>] irq_exit+0xd5/0xe0 [ 327.696018] [<ffffffff81033005>] smp_apic_timer_interrupt+0x45/0x60 [ 327.696018] [<ffffffff814df4af>] apic_timer_interrupt+0x6f/0x80 [ 327.696018] [<ffffffff8100b70e>] arch_cpu_idle+0x1e/0x30 [ 327.696018] [<ffffffff810a039d>] cpu_idle_loop+0x1fd/0x280 [ 327.696018] [<ffffffff810a043e>] cpu_startup_entry+0x1e/0x20 [ 327.696018] [<ffffffff81031589>] start_secondary+0x89/0x90 [ 327.696018] [ 327.696018] -> #0 (((timer))#2){+.-...}: [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b [ 327.696018] [ 327.696018] other info that might help us debug this: [ 327.696018] [ 327.696018] Possible unsafe locking scenario: [ 327.696018] [ 327.696018] CPU0 CPU1 [ 327.696018] ---- ---- [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] lock(&(&b_ptr->lock)->rlock); [ 327.696018] lock(((timer))#2); [ 327.696018] [ 327.696018] *** DEADLOCK *** [ 327.696018] [ 327.696018] 5 locks held by tipc-config/5825: [ 327.696018] #0: (cb_lock){++++++}, at: [<ffffffff8143e608>] genl_rcv+0x18/0x40 [ 327.696018] #1: (genl_mutex){+.+.+.}, at: [<ffffffff8143ed66>] genl_rcv_msg+0xa6/0xd0 [ 327.696018] #2: (config_mutex){+.+.+.}, at: [<ffffffffa02bf889>] tipc_cfg_do_cmd+0x39/ 0x550 [tipc] [ 327.696018] #3: (tipc_net_lock){++.-..}, at: [<ffffffffa02be738>] tipc_disable_bearer+ 0x18/0x60 [tipc] [ 327.696018] #4: (&(&b_ptr->lock)->rlock){+.-...}, at: [<ffffffffa02be58d>] bearer_disable+0xdd/0x120 [tipc] [ 327.696018] [ 327.696018] stack backtrace: [ 327.696018] CPU: 2 PID: 5825 Comm: tipc-config Tainted: G O 3.11.0-rc3-wwd- default #4 [ 327.696018] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 327.696018] 00000000ffffffff ffff880037fa77a8 ffffffff814d03dd 0000000000000000 [ 327.696018] ffff880037fa7808 ffff880037fa77e8 ffffffff810b1c4f 0000000037fa77e8 [ 327.696018] ffff880037fa7808 ffff880037e4db40 0000000000000000 ffff880037e4e318 [ 327.696018] Call Trace: [ 327.696018] [<ffffffff814d03dd>] dump_stack+0x4d/0xa0 [ 327.696018] [<ffffffff810b1c4f>] print_circular_bug+0x10f/0x120 [ 327.696018] [<ffffffff810b33fe>] check_prev_add+0x43e/0x4b0 [ 327.696018] [<ffffffff810b3b4d>] validate_chain+0x6dd/0x870 [ 327.696018] [<ffffffff81087a28>] ? sched_clock_cpu+0xd8/0x110 [ 327.696018] [<ffffffff810b40bb>] __lock_acquire+0x3db/0x670 [ 327.696018] [<ffffffff810b4453>] lock_acquire+0x103/0x130 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffff8105bebd>] del_timer_sync+0x3d/0xd0 [ 327.696018] [<ffffffff8105be80>] ? try_to_del_timer_sync+0x70/0x70 [ 327.696018] [<ffffffffa02c5855>] tipc_disc_delete+0x15/0x30 [tipc] [ 327.696018] [<ffffffffa02be59f>] bearer_disable+0xef/0x120 [tipc] [ 327.696018] [<ffffffffa02be74f>] tipc_disable_bearer+0x2f/0x60 [tipc] [ 327.696018] [<ffffffffa02bfb32>] tipc_cfg_do_cmd+0x2e2/0x550 [tipc] [ 327.696018] [<ffffffff81218783>] ? security_capable+0x13/0x20 [ 327.696018] [<ffffffffa02c8c79>] handle_cmd+0x49/0xe0 [tipc] [ 327.696018] [<ffffffff8143e898>] genl_family_rcv_msg+0x268/0x340 [ 327.696018] [<ffffffff8143ed30>] genl_rcv_msg+0x70/0xd0 [ 327.696018] [<ffffffff8143ecc0>] ? genl_lock+0x20/0x20 [ 327.696018] [<ffffffff8143d4c9>] netlink_rcv_skb+0x89/0xb0 [ 327.696018] [<ffffffff8143e608>] ? genl_rcv+0x18/0x40 [ 327.696018] [<ffffffff8143e617>] genl_rcv+0x27/0x40 [ 327.696018] [<ffffffff8143d21e>] netlink_unicast+0x15e/0x1b0 [ 327.696018] [<ffffffff81289d7c>] ? memcpy_fromiovec+0x6c/0x90 [ 327.696018] [<ffffffff8143ddcf>] netlink_sendmsg+0x22f/0x400 [ 327.696018] [<ffffffff813f7836>] __sock_sendmsg+0x66/0x80 [ 327.696018] [<ffffffff813f7957>] sock_aio_write+0x107/0x120 [ 327.696018] [<ffffffff813fe29c>] ? release_sock+0x8c/0xa0 [ 327.696018] [<ffffffff8117f76d>] do_sync_write+0x7d/0xc0 [ 327.696018] [<ffffffff8117fa24>] ? rw_verify_area+0x54/0x100 [ 327.696018] [<ffffffff8117fc56>] vfs_write+0x186/0x190 [ 327.696018] [<ffffffff811803e0>] SyS_write+0x60/0xb0 [ 327.696018] [<ffffffff814de852>] system_call_fastpath+0x16/0x1b ----------------------------------------------------------------------- The problem is that the tipc_link_delete() will cancel the timer disc_timeout() when the b_ptr->lock is hold, but the disc_timeout() still call b_ptr->lock to finish the work, so the dead lock occurs. We should unlock the b_ptr->lock when del the disc_timeout(). Remove link_timeout() still met the same problem, the patch: http://article.gmane.org/gmane.network.tipc.general/4380 fix the problem, so no need to send patch for fix link_timeout() deadlock warming. Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a base infrastructure that allows SCTP to do memory accounting for control chunks. Real accounting code will follow. This patch alos fixes the following triggered bug ... [ 553.109742] kernel BUG at include/linux/skbuff.h:1813! [ 553.109766] invalid opcode: 0000 [#1] SMP [ 553.109789] Modules linked in: sctp libcrc32c rfcomm [...] [ 553.110259] uinput i915 i2c_algo_bit drm_kms_helper e1000e drm ptp pps_core i2c_core wmi video sunrpc [ 553.110320] CPU: 0 PID: 1636 Comm: lt-test_1_to_1_ Not tainted 3.11.0-rc3+ #2 [ 553.110350] Hardware name: LENOVO 74597D6/74597D6, BIOS 6DET60WW (3.10 ) 09/17/2009 [ 553.110381] task: ffff88020a01dd40 ti: ffff880204ed0000 task.ti: ffff880204ed0000 [ 553.110411] RIP: 0010:[<ffffffffa0698017>] [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6 [sctp] [ 553.110459] RSP: 0018:ffff880204ed1bb8 EFLAGS: 00010286 [ 553.110483] RAX: ffff8802086f5a40 RBX: ffff880204303300 RCX: 0000000000000000 [ 553.110487] RDX: ffff880204303c28 RSI: ffff8802086f5a40 RDI: ffff880202158000 [ 553.110487] RBP: ffff880204ed1bb8 R08: 0000000000000000 R09: 0000000000000000 [ 553.110487] R10: ffff88022f2d9a04 R11: ffff880233001600 R12: 0000000000000000 [ 553.110487] R13: ffff880204303c00 R14: ffff8802293d0000 R15: ffff880202158000 [ 553.110487] FS: 00007f31b31fe740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [ 553.110487] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 553.110487] CR2: 000000379980e3e0 CR3: 000000020d225000 CR4: 00000000000407f0 [ 553.110487] Stack: [ 553.110487] ffff880204ed1ca8 ffffffffa068d7fc 0000000000000000 0000000000000000 [ 553.110487] 0000000000000000 ffff8802293d0000 ffff880202158000 ffffffff81cb7900 [ 553.110487] 0000000000000000 0000400000001c68 ffff8802086f5a40 000000000000000f [ 553.110487] Call Trace: [ 553.110487] [<ffffffffa068d7fc>] sctp_sendmsg+0x6bc/0xc80 [sctp] [ 553.110487] [<ffffffff8128f185>] ? sock_has_perm+0x75/0x90 [ 553.110487] [<ffffffff815a3593>] inet_sendmsg+0x63/0xb0 [ 553.110487] [<ffffffff8128f2b3>] ? selinux_socket_sendmsg+0x23/0x30 [ 553.110487] [<ffffffff8151c5d6>] sock_sendmsg+0xa6/0xd0 [ 553.110487] [<ffffffff81637b05>] ? _raw_spin_unlock_bh+0x15/0x20 [ 553.110487] [<ffffffff8151cd38>] SYSC_sendto+0x128/0x180 [ 553.110487] [<ffffffff8151ce6b>] ? SYSC_connect+0xdb/0x100 [ 553.110487] [<ffffffffa0690031>] ? sctp_inet_listen+0x71/0x1f0 [sctp] [ 553.110487] [<ffffffff8151d35e>] SyS_sendto+0xe/0x10 [ 553.110487] [<ffffffff81640202>] system_call_fastpath+0x16/0x1b [ 553.110487] Code: e0 48 c7 c7 00 22 6a a0 e8 67 a3 f0 e0 48 c7 [...] [ 553.110487] RIP [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6 [sctp] [ 553.110487] RSP <ffff880204ed1bb8> [ 553.121578] ---[ end trace 46c20c5903ef5be2 ]--- The approach taken here is to split data and control chunks creation a bit. Data chunks already have memory accounting so noting needs to happen. For control chunks, add stubs handlers. Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…ea as VM_ALLOC Erhard reported the following KASAN hit while booting his PowerMac G4 with a KASAN-enabled kernel 6.13-rc6: BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8 Write of size 8 at addr f1000000 by task chronyd/1293 CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2 Tainted: [W]=WARN Hardware name: PowerMac3,6 7455 0x80010303 PowerMac Call Trace: [c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable) [c24375b0] [c0504998] print_report+0xdc/0x504 [c2437610] [c050475c] kasan_report+0xf8/0x108 [c2437690] [c0505a3c] kasan_check_range+0x24/0x18c [c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8 [c24376c0] [c004c014] patch_instructions+0x15c/0x16c [c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c [c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac [c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec [c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478 [c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14 [c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4 [c24379d0] [c027111c] do_seccomp+0x3dc/0x1890 [c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420 [c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c --- interrupt: c00 at 0x5a1274 NIP: 005a1274 LR: 006a3b3c CTR: 005296c8 REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4) MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000 GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932 GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57 GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002 GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001 NIP [005a1274] 0x5a1274 LR [006a3b3c] 0x6a3b3c --- interrupt: c00 The buggy address belongs to the virtual mapping at [f1000000, f1002000) created by: text_area_cpu_up+0x20/0x190 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30 flags: 0x80000000(zone=2) raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001 raw: 00000000 page dumped because: kasan: bad access detected Memory state around the buggy address: f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not initialised hence not supposed to be used yet. Powerpc text patching infrastructure allocates a virtual memory area using get_vm_area() and flags it as VM_ALLOC. But that flag is meant to be used for vmalloc() and vmalloc() allocated memory is not supposed to be used before a call to __vmalloc_node_range() which is never called for that area. That went undetected until commit e4137f0 ("mm, kasan, kmsan: instrument copy_from/to_kernel_nofault") The area allocated by text_area_cpu_up() is not vmalloc memory, it is mapped directly on demand when needed by map_kernel_page(). There is no VM flag corresponding to such usage, so just pass no flag. That way the area will be unpoisonned and usable immediately. Reported-by: Erhard Furtner <erhard_f@mailbox.org> Closes: https://lore.kernel.org/all/20250112135832.57c92322@yea/ Fixes: 37bc3e5 ("powerpc/lib/code-patching: Use alternate map for patch_instruction()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/06621423da339b374f48c0886e3a5db18e896be8.1739342693.git.christophe.leroy@csgroup.eu

Since commit 6037802 ("power: supply: core: implement extension API") there is the following ABBA deadlock (simplified) between the LED trigger code and the power-supply code: 1) When registering a power-supply class device, power_supply_register() calls led_trigger_register() from power_supply_create_triggers() in a scoped_guard(rwsem_read, &psy->extensions_sem) context. led_trigger_register() then in turn takes a LED subsystem lock. So here we have the following locking order: * Read-lock extensions_sem * Lock LED subsystem lock(s) 2) When registering a LED class device, with its default trigger set to a power-supply LED trigger (which has already been registered) The LED class code calls power_supply_led_trigger_activate() when setting up the default trigger. power_supply_led_trigger_activate() calls power_supply_get_property() to determine the initial value of to assign to the LED and that read-locks extensions_sem. So now we have the following locking order: * Lock LED subsystem lock(s) * Read-lock extensions_sem Fixing this is easy, there is no need to hold the extensions_sem when calling power_supply_create_triggers() since all triggers are always created rather then checking for the presence of certain attributes as power_supply_add_hwmon_sysfs() does. Move power_supply_create_triggers() out of the guard block to fix this. Here is the lockdep report fixed by this change: [ 31.249343] ====================================================== [ 31.249378] WARNING: possible circular locking dependency detected [ 31.249413] 6.13.0-rc6+ #251 Tainted: G C E [ 31.249440] ------------------------------------------------------ [ 31.249471] (udev-worker)/553 is trying to acquire lock: [ 31.249501] ffff892adbcaf660 (&psy->extensions_sem){.+.+}-{4:4}, at: power_supply_get_property.part.0+0x22/0x150 [ 31.249574] but task is already holding lock: [ 31.249603] ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 [ 31.249657] which lock already depends on the new lock. [ 31.249696] the existing dependency chain (in reverse order) is: [ 31.249735] -> #2 (&led_cdev->trigger_lock){+.+.}-{4:4}: [ 31.249778] down_write+0x3b/0xd0 [ 31.249803] led_trigger_set_default+0x34/0xe0 [ 31.249833] led_classdev_register_ext+0x311/0x3a0 [ 31.249863] input_leds_connect+0x1dc/0x2a0 [ 31.249889] input_attach_handler.isra.0+0x75/0x90 [ 31.249921] input_register_device.cold+0xa1/0x150 [ 31.249955] hidinput_connect+0x8a2/0xb80 [ 31.249982] hid_connect+0x582/0x5c0 [ 31.250007] hid_hw_start+0x3f/0x60 [ 31.250030] hid_device_probe+0x122/0x1f0 [ 31.250053] really_probe+0xde/0x340 [ 31.250080] __driver_probe_device+0x78/0x110 [ 31.250105] driver_probe_device+0x1f/0xa0 [ 31.250132] __device_attach_driver+0x85/0x110 [ 31.250160] bus_for_each_drv+0x78/0xc0 [ 31.250184] __device_attach+0xb0/0x1b0 [ 31.250207] bus_probe_device+0x94/0xb0 [ 31.250230] device_add+0x64a/0x860 [ 31.250252] hid_add_device+0xe5/0x240 [ 31.250279] usbhid_probe+0x4dc/0x620 [ 31.250303] usb_probe_interface+0xe4/0x2a0 [ 31.250329] really_probe+0xde/0x340 [ 31.250353] __driver_probe_device+0x78/0x110 [ 31.250377] driver_probe_device+0x1f/0xa0 [ 31.250404] __device_attach_driver+0x85/0x110 [ 31.250431] bus_for_each_drv+0x78/0xc0 [ 31.250455] __device_attach+0xb0/0x1b0 [ 31.250478] bus_probe_device+0x94/0xb0 [ 31.250501] device_add+0x64a/0x860 [ 31.250523] usb_set_configuration+0x606/0x8a0 [ 31.250552] usb_generic_driver_probe+0x3e/0x60 [ 31.250579] usb_probe_device+0x3d/0x120 [ 31.250605] really_probe+0xde/0x340 [ 31.250629] __driver_probe_device+0x78/0x110 [ 31.250653] driver_probe_device+0x1f/0xa0 [ 31.250680] __device_attach_driver+0x85/0x110 [ 31.250707] bus_for_each_drv+0x78/0xc0 [ 31.250731] __device_attach+0xb0/0x1b0 [ 31.250753] bus_probe_device+0x94/0xb0 [ 31.250776] device_add+0x64a/0x860 [ 31.250798] usb_new_device.cold+0x141/0x38f [ 31.250828] hub_event+0x1166/0x1980 [ 31.250854] process_one_work+0x20f/0x580 [ 31.250879] worker_thread+0x1d1/0x3b0 [ 31.250904] kthread+0xee/0x120 [ 31.250926] ret_from_fork+0x30/0x50 [ 31.250954] ret_from_fork_asm+0x1a/0x30 [ 31.250982] -> #1 (triggers_list_lock){++++}-{4:4}: [ 31.251022] down_write+0x3b/0xd0 [ 31.251045] led_trigger_register+0x40/0x1b0 [ 31.251074] power_supply_register_led_trigger+0x88/0x150 [ 31.251107] power_supply_create_triggers+0x55/0xe0 [ 31.251135] __power_supply_register.part.0+0x34e/0x4a0 [ 31.251164] devm_power_supply_register+0x70/0xc0 [ 31.251190] bq27xxx_battery_setup+0x1a1/0x6d0 [bq27xxx_battery] [ 31.251235] bq27xxx_battery_i2c_probe+0xe5/0x17f [bq27xxx_battery_i2c] [ 31.251272] i2c_device_probe+0x125/0x2b0 [ 31.251299] really_probe+0xde/0x340 [ 31.251324] __driver_probe_device+0x78/0x110 [ 31.251348] driver_probe_device+0x1f/0xa0 [ 31.251375] __driver_attach+0xba/0x1c0 [ 31.251398] bus_for_each_dev+0x6b/0xb0 [ 31.251421] bus_add_driver+0x111/0x1f0 [ 31.251445] driver_register+0x6e/0xc0 [ 31.251470] i2c_register_driver+0x41/0xb0 [ 31.251498] do_one_initcall+0x5e/0x3a0 [ 31.251522] do_init_module+0x60/0x220 [ 31.251550] __do_sys_init_module+0x15f/0x190 [ 31.251575] do_syscall_64+0x93/0x180 [ 31.251598] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.251629] -> #0 (&psy->extensions_sem){.+.+}-{4:4}: [ 31.251668] __lock_acquire+0x13ce/0x21c0 [ 31.251694] lock_acquire+0xcf/0x2e0 [ 31.251719] down_read+0x3e/0x170 [ 31.251741] power_supply_get_property.part.0+0x22/0x150 [ 31.251774] power_supply_update_leds+0x8d/0x230 [ 31.251804] power_supply_led_trigger_activate+0x18/0x20 [ 31.251837] led_trigger_set+0x1fc/0x300 [ 31.251863] led_trigger_set_default+0x90/0xe0 [ 31.251892] led_classdev_register_ext+0x311/0x3a0 [ 31.251921] devm_led_classdev_multicolor_register_ext+0x6e/0xb80 [led_class_multicolor] [ 31.251969] ktd202x_probe+0x464/0x5c0 [leds_ktd202x] [ 31.252002] i2c_device_probe+0x125/0x2b0 [ 31.252027] really_probe+0xde/0x340 [ 31.252052] __driver_probe_device+0x78/0x110 [ 31.252076] driver_probe_device+0x1f/0xa0 [ 31.252103] __driver_attach+0xba/0x1c0 [ 31.252125] bus_for_each_dev+0x6b/0xb0 [ 31.252148] bus_add_driver+0x111/0x1f0 [ 31.252172] driver_register+0x6e/0xc0 [ 31.252197] i2c_register_driver+0x41/0xb0 [ 31.252225] do_one_initcall+0x5e/0x3a0 [ 31.252248] do_init_module+0x60/0x220 [ 31.252274] __do_sys_init_module+0x15f/0x190 [ 31.253986] do_syscall_64+0x93/0x180 [ 31.255826] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 31.257614] other info that might help us debug this: [ 31.257619] Chain exists of: &psy->extensions_sem --> triggers_list_lock --> &led_cdev->trigger_lock [ 31.257630] Possible unsafe locking scenario: [ 31.257632] CPU0 CPU1 [ 31.257633] ---- ---- [ 31.257634] lock(&led_cdev->trigger_lock); [ 31.257637] lock(triggers_list_lock); [ 31.257640] lock(&led_cdev->trigger_lock); [ 31.257643] rlock(&psy->extensions_sem); [ 31.257646] *** DEADLOCK *** [ 31.289433] 4 locks held by (udev-worker)/553: [ 31.289443] #0: ffff892ad9658108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xaf/0x1c0 [ 31.289463] #1: ffff892adbc0bbc8 (&led_cdev->led_access){+.+.}-{4:4}, at: led_classdev_register_ext+0x1c7/0x3a0 [ 31.289476] #2: ffffffffad0e30b0 (triggers_list_lock){++++}-{4:4}, at: led_trigger_set_default+0x2c/0xe0 [ 31.289487] #3: ffff892adbc0bad0 (&led_cdev->trigger_lock){+.+.}-{4:4}, at: led_trigger_set_default+0x34/0xe0 Fixes: 6037802 ("power: supply: core: implement extension API") Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250130140035.20636-1-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20 Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250121135833.3769310-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

into HEAD KVM x86 fixes for 6.14-rcN #2 - Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow. - Ensure DEBUGCTL is context switched on AMD to avoid running the guest with the host's value, which can lead to unexpected bus lock #DBs. - Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly emulate BTF. KVM's lack of context switching has meant BTF has always been broken to some extent. - Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest can enable DebugSwap without KVM's knowledge. - Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO memory" phase without actually generating a write-protection fault. - Fix a printf() goof in the SEV smoke test that causes build failures with -Werror. - Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2 isn't supported by KVM.

A blocking notification chain uses a read-write semaphore to protect the integrity of the chain. The semaphore is acquired for writing when adding / removing notifiers to / from the chain and acquired for reading when traversing the chain and informing notifiers about an event. In case of the blocking switchdev notification chain, recursive notifications are possible which leads to the semaphore being acquired twice for reading and to lockdep warnings being generated [1]. Specifically, this can happen when the bridge driver processes a SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications about deferred events when calling switchdev_deferred_process(). Fix this by converting the notification chain to a raw notification chain in a similar fashion to the netdev notification chain. Protect the chain using the RTNL mutex by acquiring it when modifying the chain. Events are always informed under the RTNL mutex, but add an assertion in call_switchdev_blocking_notifiers() to make sure this is not violated in the future. Maintain the "blocking" prefix as events are always emitted from process context and listeners are allowed to block. [1]: WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted -------------------------------------------- ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((switchdev_blocking_notif_chain).rwsem); lock((switchdev_blocking_notif_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ip/52731: #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 stack backtrace: ... ? __pfx_down_read+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 ? __pfx_switchdev_port_attr_set_deferred+0x10/0x10 blocking_notifier_call_chain+0x58/0xa0 switchdev_port_attr_notify.constprop.0+0xb3/0x1b0 ? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? switchdev_deferred_process+0x11a/0x340 switchdev_port_attr_set_deferred+0x27/0xd0 switchdev_deferred_process+0x164/0x340 br_switchdev_port_unoffload+0xc8/0x100 [bridge] br_switchdev_blocking_event+0x29f/0x580 [bridge] notifier_call_chain+0xa2/0x440 blocking_notifier_call_chain+0x6e/0xa0 switchdev_bridge_port_unoffload+0xde/0x1a0 ... Fixes: f7a70d6 ("net: bridge: switchdev: Ensure deferred event delivery on unoffload") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 191.389588] ? do_user_addr_fault+0x559/0x800 [ 191.390027] ? irqentry_exit_to_user_mode+0x43/0x230 [ 191.390525] ? irqentry_exit+0x1d/0x30 [ 191.390879] ? exc_page_fault+0x86/0x160 [ 191.391235] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 191.391745] RIP: 0033:0x7dbc4ff1c574 [ 191.392111] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 191.393412] RSP: 002b:00007ffd95a23ab8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 191.393990] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007dbc4ff1c574 [ 191.394594] RDX: 0000000000000005 RSI: 00005a6eeadb0ce0 RDI: 0000000000000001 [ 191.395215] RBP: 00007ffd95a23ae0 R08: 00007dbc50003b20 R09: 0000000000000000 [ 191.395805] R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000000005 [ 191.396404] R13: 00005a6eeadb0ce0 R14: 00007dbc500045c0 R15: 00007dbc50001ee0 [ 191.396987] </TASK> To fix this, we explicitly set such mana debugfs variables to NULL after debugfs_remove() is called. Fixes: 6607c17 ("net: mana: Enable debugfs files for MANA device") Cc: stable@vger.kernel.org Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://patch.msgid.link/1741688260-28922-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…cal section A circular lock dependency splat has been seen involving down_trylock(): ====================================================== WARNING: possible circular locking dependency detected 6.12.0-41.el10.s390x+debug ------------------------------------------------------ dd/32479 is trying to acquire lock: 0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90 but task is already holding lock: 000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0 the existing dependency chain (in reverse order) is: -> #4 (&zone->lock){-.-.}-{2:2}: -> #3 (hrtimer_bases.lock){-.-.}-{2:2}: -> #2 (&rq->__lock){-.-.}-{2:2}: -> #1 (&p->pi_lock){-.-.}-{2:2}: -> #0 ((console_sem).lock){-.-.}-{2:2}: The console_sem -> pi_lock dependency is due to calling try_to_wake_up() while holding the console_sem raw_spinlock. This dependency can be broken by using wake_q to do the wakeup instead of calling try_to_wake_up() under the console_sem lock. This will also make the semaphore's raw_spinlock become a terminal lock without taking any further locks underneath it. The hrtimer_bases.lock is a raw_spinlock while zone->lock is a spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via the debug_objects_fill_pool() helper function in the debugobjects code. -> #4 (&zone->lock){-.-.}-{2:2}: __lock_acquire+0xe86/0x1cc0 lock_acquire.part.0+0x258/0x630 lock_acquire+0xb8/0xe0 _raw_spin_lock_irqsave+0xb4/0x120 rmqueue_bulk+0xac/0x8f0 __rmqueue_pcplist+0x580/0x830 rmqueue_pcplist+0xfc/0x470 rmqueue.isra.0+0xdec/0x11b0 get_page_from_freelist+0x2ee/0xeb0 __alloc_pages_noprof+0x2c2/0x520 alloc_pages_mpol_noprof+0x1fc/0x4d0 alloc_pages_noprof+0x8c/0xe0 allocate_slab+0x320/0x460 ___slab_alloc+0xa58/0x12b0 __slab_alloc.isra.0+0x42/0x60 kmem_cache_alloc_noprof+0x304/0x350 fill_pool+0xf6/0x450 debug_object_activate+0xfe/0x360 enqueue_hrtimer+0x34/0x190 __run_hrtimer+0x3c8/0x4c0 __hrtimer_run_queues+0x1b2/0x260 hrtimer_interrupt+0x316/0x760 do_IRQ+0x9a/0xe0 do_irq_async+0xf6/0x160 Normally a raw_spinlock to spinlock dependency is not legitimate and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled, but debug_objects_fill_pool() is an exception as it explicitly allows this dependency for non-PREEMPT_RT kernel without causing PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is legitimate and not a bug. Anyway, semaphore is the only locking primitive left that is still using try_to_wake_up() to do wakeup inside critical section, all the other locking primitives had been migrated to use wake_q to do wakeup outside of the critical section. It is also possible that there are other circular locking dependencies involving printk/console_sem or other existing/new semaphores lurking somewhere which may show up in the future. Let just do the migration now to wake_q to avoid headache like this. Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com

Non-hybrid CPU variants that share the same Family/Model could be differentiated by their cpu-type. x86_match_cpu() currently does not use cpu-type for CPU matching. Dave Hansen suggested to use below conditions to match CPU-type: 1. If CPU_TYPE_ANY (the wildcard), then matched 2. If hybrid, then matched 3. If !hybrid, look at the boot CPU and compare the cpu-type to determine if it is a match. This special case for hybrid systems allows more compact vulnerability list. Imagine that "Haswell" CPUs might or might not be hybrid and that only Atom cores are vulnerable to Meltdown. That means there are three possibilities: 1. P-core only 2. Atom only 3. Atom + P-core (aka. hybrid) One might be tempted to code up the vulnerability list like this: MATCH( HASWELL, X86_FEATURE_HYBRID, MELTDOWN) MATCH_TYPE(HASWELL, ATOM, MELTDOWN) Logically, this matches #2 and #3. But that's a little silly. You would only ask for the "ATOM" match in cases where there *WERE* hybrid cores in play. You shouldn't have to _also_ ask for hybrid cores explicitly. In short, assume that processors that enumerate Hybrid==1 have a vulnerable core type. Update x86_match_cpu() to also match cpu-type. Also treat hybrid systems as special, and match them to any cpu-type. Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-4-e8514dcaaff2@linux.intel.com

In the Intel PMU counters test, only validate the counts for architectural events that are supported in hardware. If an arch event isn't supported, the event selector may enable a completely different event, and thus the logic for the expected count is bogus. This fixes test failures on pre-Icelake systems due to the encoding for the architectural Top-Down Slots event corresponding to something else (at least on the Skylake family of CPUs). Note, validation relies on *hardware* support, not KVM support and not guest support. Architectural events are all about enumerating the event selector encoding; lack of enumeration for an architectural event doesn't mean the event itself is unsupported, i.e. the event should still count as expected even if KVM and/or guest CPUID doesn't enumerate the event as being "architectural". Note #2, it's desirable to _program_ the architectural event encoding even if hardware doesn't support the event. The count can't be validated when the event is fully enabled, but KVM should still let the guest program the event selector, and the PMC shouldn't count if the event is disabled. Fixes: 4f1bd6b ("KVM: selftests: Test Intel PMU architectural events on gp counters") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202501141009.30c629b4-lkp@intel.com Debugged-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Link: https://lore.kernel.org/r/20250117234204.2600624-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

Sync the new iteration to the guest prior to restarting the vCPU, otherwise it's possible for the vCPU to dirty memory for the next iteration using the current iteration's value. Note, because the guest can be interrupted between the vCPU's load of the iteration and its write to memory, it's still possible for the guest to store the previous iteration to memory as the previous iteration may be cached in a CPU register (which the test accounts for). Note #2, the test's current approach of collecting dirty entries *before* stopping the vCPU also results dirty memory having the previous iteration. E.g. if page is dirtied in the previous iteration, but not the current iteration, the verification phase will observe the previous iteration's value in memory. That wart will be remedied in the near future, at which point synchronizing the iteration before restarting the vCPU will guarantee the only way for verification to observe stale iterations is due to the CPU register caching case, or due to a dirty entry being collected before the store retires. Link: https://lore.kernel.org/r/20250111003004.1235645-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

Handle "guest stopped" requests once per guest time update in preparation of restoring KVM's historical behavior of setting PVCLOCK_GUEST_STOPPED for kvmclock and only kvmclock. For now, simply move the code to minimize the probability of an unintentional change in functionally. Note, in practice, all clocks are guaranteed to see the request (or not) even though each PV clock processes the request individual, as KVM holds vcpu->mutex (blocks KVM_KVMCLOCK_CTRL) and it should be impossible for KVM's suspend notifier to run while KVM is handling requests. And because the helper updates the reference flags, all subsequent PV clock updates will pick up PVCLOCK_GUEST_STOPPED. Note #2, once PVCLOCK_GUEST_STOPPED is restricted to kvmclock, the horrific #ifdef will go away. Cc: Paul Durrant <pdurrant@amazon.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20250201013827.680235-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

Eric and Ben reported a significant performance bottleneck on the global hash, which is used to store posix timers for lookup. Eric tried to do a lockless validation of a new timer ID before trying to insert the timer, but that does not solve the problem. For the non-contended case this is a pointless exercise and for the contended case this extra lookup just creates enough interleaving that all tasks can make progress. There are actually two real solutions to the problem: 1) Provide a per process (signal struct) xarray storage 2) Implement a smarter hash like the one in the futex code #1 works perfectly fine for most cases, but the fact that CRIU enforced a linear increasing timer ID to restore timers makes this problematic. It's easy enough to create a sparse timer ID space, which amounts very fast to a large junk of memory consumed for the xarray. 2048 timers with a ID offset of 512 consume more than one megabyte of memory for the xarray storage. #2 The main advantage of the futex hash is that it uses per hash bucket locks instead of a global hash lock. Aside of that it is scaled according to the number of CPUs at boot time. Experiments with artifical benchmarks have shown that a scaled hash with per bucket locks comes pretty close to the xarray performance and in some scenarios it performes better. Test 1: A single process creates 20000 timers and afterwards invokes timer_getoverrun(2) on each of them: mainline Eric newhash xarray create 23 ms 23 ms 9 ms 8 ms getoverrun 14 ms 14 ms 5 ms 4 ms Test 2: A single process creates 50000 timers and afterwards invokes timer_getoverrun(2) on each of them: mainline Eric newhash xarray create 98 ms 219 ms 20 ms 18 ms getoverrun 62 ms 62 ms 10 ms 9 ms Test 3: A single process creates 100000 timers and afterwards invokes timer_getoverrun(2) on each of them: mainline Eric newhash xarray create 313 ms 750 ms 48 ms 33 ms getoverrun 261 ms 260 ms 20 ms 14 ms Erics changes create quite some overhead in the create() path due to the double list walk, as the main issue according to perf is the list walk itself. With 100k timers each hash bucket contains ~200 timers, which in the worst case need to be all inspected. The same problem applies for getoverrun() where the lookup has to walk through the hash buckets to find the timer it is looking for. The scaled hash obviously reduces hash collisions and lock contention significantly. This becomes more prominent with concurrency. Test 4: A process creates 63 threads and all threads wait on a barrier before each instance creates 20000 timers and afterwards invokes timer_getoverrun(2) on each of them. The threads are pinned on seperate CPUs to achive maximum concurrency. The numbers are the average times per thread: mainline Eric newhash xarray create 180239 ms 38599 ms 579 ms 813 ms getoverrun 2645 ms 2642 ms 32 ms 7 ms Test 5: A process forks 63 times and all forks wait on a barrier before each instance creates 20000 timers and afterwards invokes timer_getoverrun(2) on each of them. The processes are pinned on seperate CPUs to achive maximum concurrency. The numbers are the average times per process: mainline eric newhash xarray create 157253 ms 40008 ms 83 ms 60 ms getoverrun 2611 ms 2614 ms 40 ms 4 ms So clearly the reduction of lock contention with Eric's changes makes a significant difference for the create() loop, but it does not mitigate the problem of long list walks, which is clearly visible on the getoverrun() side because that is purely dominated by the lookup itself. Once the timer is found, the syscall just reads from the timer structure with no other locks or code paths involved and returns. The reason for the difference between the thread and the fork case for the new hash and the xarray is that both suffer from contention on sighand::siglock and the xarray suffers additionally from contention on the xarray lock on insertion. The only case where the reworked hash slighly outperforms the xarray is a tight loop which creates and deletes timers. Test 4: A process creates 63 threads and all threads wait on a barrier before each instance runs a loop which creates and deletes a timer 100000 times in a row. The threads are pinned on seperate CPUs to achive maximum concurrency. The numbers are the average times per thread: mainline Eric newhash xarray loop 5917 ms 5897 ms 5473 ms 7846 ms Test 5: A process forks 63 times and all forks wait on a barrier before each each instance runs a loop which creates and deletes a timer 100000 times in a row. The processes are pinned on seperate CPUs to achive maximum concurrency. The numbers are the average times per process: mainline Eric newhash xarray loop 5137 ms 7828 ms 891 ms 872 ms In both test there is not much contention on the hash, but the ucount accounting for the signal and in the thread case the sighand::siglock contention (plus the xarray locking) contribute dominantly to the overhead. As the memory consumption of the xarray in the sparse ID case is significant, the scaled hash with per bucket locks seems to be the better overall option. While the xarray has faster lookup times for a large number of timers, the actual syscall usage, which requires the lookup is not an extreme hotpath. Most applications utilize signal delivery and all syscalls except timer_getoverrun(2) are all but cheap. So implement a scaled hash with per bucket locks, which offers the best tradeoff between performance and memory consumption. Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: Benjamin Segall <bsegall@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/all/20250308155624.216091571@linutronix.de

The readout of /proc/$PID/timers holds sighand::siglock with interrupts disabled. That is required to protect against concurrent modifications of the task::signal::posix_timers list because the list is not RCU safe. With the conversion of the timer storage to a RCU protected hlist, this is not longer required. The only requirement is to protect the returned entry against a concurrent free, which is trivial as the timers are RCU protected. Removing the trylock of sighand::siglock is benign because the life time of task_struct::signal is bound to the life time of the task_struct itself. There are two scenarios where this matters: 1) The process is life and not about to be checkpointed 2) The process is stopped via ptrace for checkpointing #1 is a racy snapshot of the armed timers and nothing can rely on it. It's not more than debug information and it has been that way before because sighand lock is dropped when the buffer is full and the restart of the iteration might find a completely different set of timers. The task and therefore task::signal cannot be freed as timers_start() acquired a reference count via get_pid_task(). #2 the process is stopped for checkpointing so nothing can delete or create timers at this point. Neither can the process exit during the traversal. If CRIU fails to observe an exit in progress prior to the dissimination of the timers, then there are more severe problems to solve in the CRIU mechanics as they can't rely on posix timers being enabled in the first place. Therefore replace the lock acquisition with rcu_read_lock() and switch the timer storage traversal over to seq_hlist_*_rcu(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/all/20250308155624.465175807@linutronix.de

During a module removal, kvm_exit invokes arch specific disable call which disables AIA. However, we invoke aia_exit before kvm_exit resulting in the following warning. KVM kernel module can't be inserted afterwards due to inconsistent state of IRQ. [25469.031389] percpu IRQ 31 still enabled on CPU0! [25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150 [25469.031804] Modules linked in: kvm(-) [25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2 [25469.031905] Hardware name: riscv-virtio,qemu (DT) [25469.031928] epc : __free_percpu_irq+0xa2/0x150 [25469.031976] ra : __free_percpu_irq+0xa2/0x150 [25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50 [25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8 [25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90 [25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00 [25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8 [25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10 [25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f [25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000 [25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0 [25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7 [25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7 [25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003 [25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150 [25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e [25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm] [25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm] [25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc [25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46 [25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134 [25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156 Invoke aia_exit and other arch specific cleanup functions after kvm_exit so that disable gets a chance to be called first before exit. Fixes: 54e4332 ("RISC-V: KVM: Initial skeletal support for AIA") Fixes: eded675 ("riscv: KVM: add basic support for host vs guest profiling") Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20250317-kvm_exit_fix-v1-1-aa5240c5dbd2@rivosinc.com Signed-off-by: Anup Patel <anup@brainfault.org>

syzbot reported a deadlock in lock_system_sleep() (see below). The write operation to "/sys/module/hibernate/parameters/compressor" conflicts with the registration of ieee80211 device, resulting in a deadlock when attempting to acquire system_transition_mutex under param_lock. To avoid this deadlock, change hibernate_compressor_param_set() to use mutex_trylock() for attempting to acquire system_transition_mutex and return -EBUSY when it fails. Task flags need not be saved or adjusted before calling mutex_trylock(&system_transition_mutex) because the caller is not going to end up waiting for this mutex and if it runs concurrently with system suspend in progress, it will be frozen properly when it returns to user space. syzbot report: syz-executor895/5833 is trying to acquire lock: ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 but task is already holding lock: ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline] ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (param_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline] rate_control_alloc net/mac80211/rate.c:266 [inline] ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015 ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531 mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558 init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910 do_one_initcall+0x128/0x700 init/main.c:1257 do_initcall_level init/main.c:1319 [inline] do_initcalls init/main.c:1335 [inline] do_basic_setup init/main.c:1354 [inline] kernel_init_freeable+0x5c7/0x900 init/main.c:1568 kernel_init+0x1c/0x2b0 init/main.c:1457 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #2 (rtnl_mutex){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 wg_pm_notification drivers/net/wireguard/device.c:80 [inline] wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64 notifier_call_chain+0xb7/0x410 kernel/notifier.c:85 notifier_call_chain_robust kernel/notifier.c:120 [inline] blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline] blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 ((pm_chain_head).rwsem){++++}-{4:4}: down_read+0x9a/0x330 kernel/locking/rwsem.c:1524 blocking_notifier_call_chain_robust kernel/notifier.c:344 [inline] blocking_notifier_call_chain_robust+0xa9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (system_transition_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 hibernate_compressor_param_set+0x1c/0x210 kernel/power/hibernate.c:1452 param_attr_store+0x18f/0x300 kernel/params.c:588 module_attr_store+0x55/0x80 kernel/params.c:924 sysfs_kf_write+0x117/0x170 fs/sysfs/file.c:139 kernfs_fop_write_iter+0x33d/0x500 fs/kernfs/file.c:334 new_sync_write fs/read_write.c:586 [inline] vfs_write+0x5ae/0x1150 fs/read_write.c:679 ksys_write+0x12b/0x250 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: system_transition_mutex --> rtnl_mutex --> param_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(param_lock); lock(rtnl_mutex); lock(param_lock); lock(system_transition_mutex); *** DEADLOCK *** Reported-by: syzbot+ace60642828c074eb913@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ace60642828c074eb913 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20250224013139.3994500-1-lizhi.xu@windriver.com [ rjw: New subject matching the code changes, changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In recent kernels, there are lockdep splats around the struct request_queue::io_lockdep_map, similar to [1], but they typically don't show up until reclaim with writeback happens. Having multiple kernel versions released with a known risc of kernel deadlock during reclaim writeback should IMHO be addressed and backported to -stable with the highest priority. In order to have these lockdep splats show up earlier, preferrably during system initialization, prime the struct request_queue::io_lockdep_map as GFP_KERNEL reclaim- tainted. This will instead lead to lockdep splats looking similar to [2], but without the need for reclaim + writeback happening. [1]: [ 189.762244] ====================================================== [ 189.762432] WARNING: possible circular locking dependency detected [ 189.762441] 6.14.0-rc6-xe+ #6 Tainted: G U [ 189.762450] ------------------------------------------------------ [ 189.762459] kswapd0/119 is trying to acquire lock: [ 189.762467] ffff888110ceb710 (&q->q_usage_counter(io)#26){++++}-{0:0}, at: __submit_bio+0x76/0x230 [ 189.762485] but task is already holding lock: [ 189.762494] ffffffff834c97c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xbe/0xb00 [ 189.762507] which lock already depends on the new lock. [ 189.762519] the existing dependency chain (in reverse order) is: [ 189.762529] -> #2 (fs_reclaim){+.+.}-{0:0}: [ 189.762540] fs_reclaim_acquire+0xc5/0x100 [ 189.762548] kmem_cache_alloc_lru_noprof+0x4a/0x480 [ 189.762558] alloc_inode+0xaa/0xe0 [ 189.762566] iget_locked+0x157/0x330 [ 189.762573] kernfs_get_inode+0x1b/0x110 [ 189.762582] kernfs_get_tree+0x1b0/0x2e0 [ 189.762590] sysfs_get_tree+0x1f/0x60 [ 189.762597] vfs_get_tree+0x2a/0xf0 [ 189.762605] path_mount+0x4cd/0xc00 [ 189.762613] __x64_sys_mount+0x119/0x150 [ 189.762621] x64_sys_call+0x14f2/0x2310 [ 189.762630] do_syscall_64+0x91/0x180 [ 189.762637] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 189.762647] -> #1 (&root->kernfs_rwsem){++++}-{3:3}: [ 189.762659] down_write+0x3e/0xf0 [ 189.762667] kernfs_remove+0x32/0x60 [ 189.762676] sysfs_remove_dir+0x4f/0x60 [ 189.762685] __kobject_del+0x33/0xa0 [ 189.762709] kobject_del+0x13/0x30 [ 189.762716] elv_unregister_queue+0x52/0x80 [ 189.762725] elevator_switch+0x68/0x360 [ 189.762733] elv_iosched_store+0x14b/0x1b0 [ 189.762756] queue_attr_store+0x181/0x1e0 [ 189.762765] sysfs_kf_write+0x49/0x80 [ 189.762773] kernfs_fop_write_iter+0x17d/0x250 [ 189.762781] vfs_write+0x281/0x540 [ 189.762790] ksys_write+0x72/0xf0 [ 189.762798] __x64_sys_write+0x19/0x30 [ 189.762807] x64_sys_call+0x2a3/0x2310 [ 189.762815] do_syscall_64+0x91/0x180 [ 189.762823] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 189.762833] -> #0 (&q->q_usage_counter(io)#26){++++}-{0:0}: [ 189.762845] __lock_acquire+0x1525/0x2760 [ 189.762854] lock_acquire+0xca/0x310 [ 189.762861] blk_mq_submit_bio+0x8a2/0xba0 [ 189.762870] __submit_bio+0x76/0x230 [ 189.762878] submit_bio_noacct_nocheck+0x323/0x430 [ 189.762888] submit_bio_noacct+0x2cc/0x620 [ 189.762896] submit_bio+0x38/0x110 [ 189.762904] __swap_writepage+0xf5/0x380 [ 189.762912] swap_writepage+0x3c7/0x600 [ 189.762920] shmem_writepage+0x3da/0x4f0 [ 189.762929] pageout+0x13f/0x310 [ 189.762937] shrink_folio_list+0x61c/0xf60 [ 189.763261] evict_folios+0x378/0xcd0 [ 189.763584] try_to_shrink_lruvec+0x1b0/0x360 [ 189.763946] shrink_one+0x10e/0x200 [ 189.764266] shrink_node+0xc02/0x1490 [ 189.764586] balance_pgdat+0x563/0xb00 [ 189.764934] kswapd+0x1e8/0x430 [ 189.765249] kthread+0x10b/0x260 [ 189.765559] ret_from_fork+0x44/0x70 [ 189.765889] ret_from_fork_asm+0x1a/0x30 [ 189.766198] other info that might help us debug this: [ 189.767089] Chain exists of: &q->q_usage_counter(io)#26 --> &root->kernfs_rwsem --> fs_reclaim [ 189.767971] Possible unsafe locking scenario: [ 189.768555] CPU0 CPU1 [ 189.768849] ---- ---- [ 189.769136] lock(fs_reclaim); [ 189.769421] lock(&root->kernfs_rwsem); [ 189.769714] lock(fs_reclaim); [ 189.770016] rlock(&q->q_usage_counter(io)#26); [ 189.770305] *** DEADLOCK *** [ 189.771167] 1 lock held by kswapd0/119: [ 189.771453] #0: ffffffff834c97c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xbe/0xb00 [ 189.771770] stack backtrace: [ 189.772351] CPU: 4 UID: 0 PID: 119 Comm: kswapd0 Tainted: G U 6.14.0-rc6-xe+ #6 [ 189.772353] Tainted: [U]=USER [ 189.772354] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 189.772354] Call Trace: [ 189.772355] <TASK> [ 189.772356] dump_stack_lvl+0x6e/0xa0 [ 189.772359] dump_stack+0x10/0x18 [ 189.772360] print_circular_bug.cold+0x17a/0x1b7 [ 189.772363] check_noncircular+0x13a/0x150 [ 189.772365] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 189.772368] __lock_acquire+0x1525/0x2760 [ 189.772368] ? ret_from_fork_asm+0x1a/0x30 [ 189.772371] lock_acquire+0xca/0x310 [ 189.772372] ? __submit_bio+0x76/0x230 [ 189.772375] ? lock_release+0xd5/0x2c0 [ 189.772376] blk_mq_submit_bio+0x8a2/0xba0 [ 189.772378] ? __submit_bio+0x76/0x230 [ 189.772380] __submit_bio+0x76/0x230 [ 189.772382] ? trace_hardirqs_on+0x1e/0xe0 [ 189.772384] submit_bio_noacct_nocheck+0x323/0x430 [ 189.772386] ? submit_bio_noacct_nocheck+0x323/0x430 [ 189.772387] ? __might_sleep+0x58/0xa0 [ 189.772390] submit_bio_noacct+0x2cc/0x620 [ 189.772391] ? count_memcg_events+0x68/0x90 [ 189.772393] submit_bio+0x38/0x110 [ 189.772395] __swap_writepage+0xf5/0x380 [ 189.772396] swap_writepage+0x3c7/0x600 [ 189.772397] shmem_writepage+0x3da/0x4f0 [ 189.772401] pageout+0x13f/0x310 [ 189.772406] shrink_folio_list+0x61c/0xf60 [ 189.772409] ? isolate_folios+0xe80/0x16b0 [ 189.772410] ? mark_held_locks+0x46/0x90 [ 189.772412] evict_folios+0x378/0xcd0 [ 189.772414] ? evict_folios+0x34a/0xcd0 [ 189.772415] ? lock_is_held_type+0xa3/0x130 [ 189.772417] try_to_shrink_lruvec+0x1b0/0x360 [ 189.772420] shrink_one+0x10e/0x200 [ 189.772421] shrink_node+0xc02/0x1490 [ 189.772423] ? shrink_node+0xa08/0x1490 [ 189.772424] ? shrink_node+0xbd8/0x1490 [ 189.772425] ? mem_cgroup_iter+0x366/0x480 [ 189.772427] balance_pgdat+0x563/0xb00 [ 189.772428] ? balance_pgdat+0x563/0xb00 [ 189.772430] ? trace_hardirqs_on+0x1e/0xe0 [ 189.772431] ? finish_task_switch.isra.0+0xcb/0x330 [ 189.772433] ? __switch_to_asm+0x33/0x70 [ 189.772437] kswapd+0x1e8/0x430 [ 189.772438] ? __pfx_autoremove_wake_function+0x10/0x10 [ 189.772440] ? __pfx_kswapd+0x10/0x10 [ 189.772441] kthread+0x10b/0x260 [ 189.772443] ? __pfx_kthread+0x10/0x10 [ 189.772444] ret_from_fork+0x44/0x70 [ 189.772446] ? __pfx_kthread+0x10/0x10 [ 189.772447] ret_from_fork_asm+0x1a/0x30 [ 189.772450] </TASK> [2]: [ 8.760253] ====================================================== [ 8.760254] WARNING: possible circular locking dependency detected [ 8.760255] 6.14.0-rc6-xe+ #7 Tainted: G U [ 8.760256] ------------------------------------------------------ [ 8.760257] (udev-worker)/674 is trying to acquire lock: [ 8.760259] ffff888100e39148 (&root->kernfs_rwsem){++++}-{3:3}, at: kernfs_remove+0x32/0x60 [ 8.760265] but task is already holding lock: [ 8.760266] ffff888110dc7680 (&q->q_usage_counter(io)#27){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x12/0x30 [ 8.760272] which lock already depends on the new lock. [ 8.760272] the existing dependency chain (in reverse order) is: [ 8.760273] -> #2 (&q->q_usage_counter(io)#27){++++}-{0:0}: [ 8.760276] blk_alloc_queue+0x30a/0x350 [ 8.760279] blk_mq_alloc_queue+0x6b/0xe0 [ 8.760281] scsi_alloc_sdev+0x276/0x3c0 [ 8.760284] scsi_probe_and_add_lun+0x22a/0x440 [ 8.760286] __scsi_scan_target+0x109/0x230 [ 8.760288] scsi_scan_channel+0x65/0xc0 [ 8.760290] scsi_scan_host_selected+0xff/0x140 [ 8.760292] do_scsi_scan_host+0xa7/0xc0 [ 8.760293] do_scan_async+0x1c/0x160 [ 8.760295] async_run_entry_fn+0x32/0x150 [ 8.760299] process_one_work+0x224/0x5f0 [ 8.760302] worker_thread+0x1d4/0x3e0 [ 8.760304] kthread+0x10b/0x260 [ 8.760306] ret_from_fork+0x44/0x70 [ 8.760309] ret_from_fork_asm+0x1a/0x30 [ 8.760312] -> #1 (fs_reclaim){+.+.}-{0:0}: [ 8.760315] fs_reclaim_acquire+0xc5/0x100 [ 8.760317] kmem_cache_alloc_lru_noprof+0x4a/0x480 [ 8.760319] alloc_inode+0xaa/0xe0 [ 8.760322] iget_locked+0x157/0x330 [ 8.760323] kernfs_get_inode+0x1b/0x110 [ 8.760325] kernfs_get_tree+0x1b0/0x2e0 [ 8.760327] sysfs_get_tree+0x1f/0x60 [ 8.760329] vfs_get_tree+0x2a/0xf0 [ 8.760332] path_mount+0x4cd/0xc00 [ 8.760334] __x64_sys_mount+0x119/0x150 [ 8.760336] x64_sys_call+0x14f2/0x2310 [ 8.760338] do_syscall_64+0x91/0x180 [ 8.760340] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 8.760342] -> #0 (&root->kernfs_rwsem){++++}-{3:3}: [ 8.760345] __lock_acquire+0x1525/0x2760 [ 8.760347] lock_acquire+0xca/0x310 [ 8.760348] down_write+0x3e/0xf0 [ 8.760350] kernfs_remove+0x32/0x60 [ 8.760351] sysfs_remove_dir+0x4f/0x60 [ 8.760353] __kobject_del+0x33/0xa0 [ 8.760355] kobject_del+0x13/0x30 [ 8.760356] elv_unregister_queue+0x52/0x80 [ 8.760358] elevator_switch+0x68/0x360 [ 8.760360] elv_iosched_store+0x14b/0x1b0 [ 8.760362] queue_attr_store+0x181/0x1e0 [ 8.760364] sysfs_kf_write+0x49/0x80 [ 8.760366] kernfs_fop_write_iter+0x17d/0x250 [ 8.760367] vfs_write+0x281/0x540 [ 8.760370] ksys_write+0x72/0xf0 [ 8.760372] __x64_sys_write+0x19/0x30 [ 8.760374] x64_sys_call+0x2a3/0x2310 [ 8.760376] do_syscall_64+0x91/0x180 [ 8.760377] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 8.760380] other info that might help us debug this: [ 8.760380] Chain exists of: &root->kernfs_rwsem --> fs_reclaim --> &q->q_usage_counter(io)#27 [ 8.760384] Possible unsafe locking scenario: [ 8.760384] CPU0 CPU1 [ 8.760385] ---- ---- [ 8.760385] lock(&q->q_usage_counter(io)#27); [ 8.760387] lock(fs_reclaim); [ 8.760388] lock(&q->q_usage_counter(io)#27); [ 8.760390] lock(&root->kernfs_rwsem); [ 8.760391] *** DEADLOCK *** [ 8.760391] 6 locks held by (udev-worker)/674: [ 8.760392] #0: ffff8881209ac420 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 [ 8.760398] #1: ffff88810c80f488 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x136/0x250 [ 8.760402] #2: ffff888125d1d330 (kn->active#101){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x13f/0x250 [ 8.760406] #3: ffff888110dc7bb0 (&q->sysfs_lock){+.+.}-{3:3}, at: queue_attr_store+0x148/0x1e0 [ 8.760411] #4: ffff888110dc7680 (&q->q_usage_counter(io)#27){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x12/0x30 [ 8.760416] #5: ffff888110dc76b8 (&q->q_usage_counter(queue)#27){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x12/0x30 [ 8.760421] stack backtrace: [ 8.760422] CPU: 7 UID: 0 PID: 674 Comm: (udev-worker) Tainted: G U 6.14.0-rc6-xe+ #7 [ 8.760424] Tainted: [U]=USER [ 8.760425] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 8.760426] Call Trace: [ 8.760427] <TASK> [ 8.760428] dump_stack_lvl+0x6e/0xa0 [ 8.760431] dump_stack+0x10/0x18 [ 8.760433] print_circular_bug.cold+0x17a/0x1b7 [ 8.760437] check_noncircular+0x13a/0x150 [ 8.760441] ? save_trace+0x54/0x360 [ 8.760445] __lock_acquire+0x1525/0x2760 [ 8.760446] ? irqentry_exit+0x3a/0xb0 [ 8.760448] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 8.760452] lock_acquire+0xca/0x310 [ 8.760453] ? kernfs_remove+0x32/0x60 [ 8.760457] down_write+0x3e/0xf0 [ 8.760459] ? kernfs_remove+0x32/0x60 [ 8.760460] kernfs_remove+0x32/0x60 [ 8.760462] sysfs_remove_dir+0x4f/0x60 [ 8.760464] __kobject_del+0x33/0xa0 [ 8.760466] kobject_del+0x13/0x30 [ 8.760467] elv_unregister_queue+0x52/0x80 [ 8.760470] elevator_switch+0x68/0x360 [ 8.760472] elv_iosched_store+0x14b/0x1b0 [ 8.760475] queue_attr_store+0x181/0x1e0 [ 8.760479] ? lock_acquire+0xca/0x310 [ 8.760480] ? kernfs_fop_write_iter+0x13f/0x250 [ 8.760482] ? lock_is_held_type+0xa3/0x130 [ 8.760485] sysfs_kf_write+0x49/0x80 [ 8.760487] kernfs_fop_write_iter+0x17d/0x250 [ 8.760489] vfs_write+0x281/0x540 [ 8.760494] ksys_write+0x72/0xf0 [ 8.760497] __x64_sys_write+0x19/0x30 [ 8.760499] x64_sys_call+0x2a3/0x2310 [ 8.760502] do_syscall_64+0x91/0x180 [ 8.760504] ? trace_hardirqs_off+0x5d/0xe0 [ 8.760506] ? handle_softirqs+0x479/0x4d0 [ 8.760508] ? hrtimer_interrupt+0x13f/0x280 [ 8.760511] ? irqentry_exit_to_user_mode+0x8b/0x260 [ 8.760513] ? clear_bhb_loop+0x15/0x70 [ 8.760515] ? clear_bhb_loop+0x15/0x70 [ 8.760516] ? clear_bhb_loop+0x15/0x70 [ 8.760518] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 8.760520] RIP: 0033:0x7aa3bf2f5504 [ 8.760522] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 8.760523] RSP: 002b:00007ffc1e3697d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 8.760526] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007aa3bf2f5504 [ 8.760527] RDX: 0000000000000003 RSI: 00007ffc1e369ae0 RDI: 000000000000001c [ 8.760528] RBP: 00007ffc1e369800 R08: 00007aa3bf3f51c8 R09: 00007ffc1e3698b0 [ 8.760528] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [ 8.760529] R13: 00007ffc1e369ae0 R14: 0000613ccf21f2f0 R15: 00007aa3bf3f4e80 [ 8.760533] </TASK> v2: - Update a code comment to increase readability (Ming Lei). Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250318095548.5187-1-thomas.hellstrom@linux.intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

The commit '245618f8e45f ("block: protect wbt_lat_usec using q-> elevator_lock")' introduced q->elevator_lock to protect updates to blk-wbt parameters when writing to the sysfs attribute wbt_ lat_usec and the cgroup attribute io.cost.qos. However, both these attributes also acquire q->rq_qos_mutex, leading to the following lockdep warning: ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc5+ #138 Not tainted ------------------------------------------------------ bash/5902 is trying to acquire lock: c000000085d495a0 (&q->rq_qos_mutex){+.+.}-{4:4}, at: wbt_init+0x164/0x238 but task is already holding lock: c000000085d498c8 (&q->elevator_lock){+.+.}-{4:4}, at: queue_wb_lat_store+0xb0/0x20c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&q->elevator_lock){+.+.}-{4:4}: __mutex_lock+0xf0/0xa58 ioc_qos_write+0x16c/0x85c cgroup_file_write+0xc4/0x32c kernfs_fop_write_iter+0x1b8/0x29c vfs_write+0x410/0x584 ksys_write+0x84/0x140 system_call_exception+0x134/0x360 system_call_vectored_common+0x15c/0x2ec -> #0 (&q->rq_qos_mutex){+.+.}-{4:4}: __lock_acquire+0x1b6c/0x2ae0 lock_acquire+0x140/0x430 __mutex_lock+0xf0/0xa58 wbt_init+0x164/0x238 queue_wb_lat_store+0x1dc/0x20c queue_attr_store+0x12c/0x164 sysfs_kf_write+0x6c/0xb0 kernfs_fop_write_iter+0x1b8/0x29c vfs_write+0x410/0x584 ksys_write+0x84/0x140 system_call_exception+0x134/0x360 system_call_vectored_common+0x15c/0x2ec other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->elevator_lock); lock(&q->rq_qos_mutex); lock(&q->elevator_lock); lock(&q->rq_qos_mutex); *** DEADLOCK *** 6 locks held by bash/5902: #0: c000000051122400 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x84/0x140 #1: c00000007383f088 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x174/0x29c #2: c000000008550428 (kn->active#182){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x180/0x29c #3: c000000085d493a8 (&q->q_usage_counter(io)#5){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x28/0x40 #4: c000000085d493e0 (&q->q_usage_counter(queue)#5){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x28/0x40 #5: c000000085d498c8 (&q->elevator_lock){+.+.}-{4:4}, at: queue_wb_lat_store+0xb0/0x20c stack backtrace: CPU: 17 UID: 0 PID: 5902 Comm: bash Kdump: loaded Not tainted 6.14.0-rc5+ #138 Hardware name: IBM,9043-MRX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_028) hv:phyp pSeries Call Trace: [c0000000721ef590] [c00000000118f8a8] dump_stack_lvl+0x108/0x18c (unreliable) [c0000000721ef5c0] [c00000000022563c] print_circular_bug+0x448/0x604 [c0000000721ef670] [c000000000225a44] check_noncircular+0x24c/0x26c [c0000000721ef740] [c00000000022bf28] __lock_acquire+0x1b6c/0x2ae0 [c0000000721ef870] [c000000000229240] lock_acquire+0x140/0x430 [c0000000721ef970] [c0000000011cfbec] __mutex_lock+0xf0/0xa58 [c0000000721efaa0] [c00000000096c46c] wbt_init+0x164/0x238 [c0000000721efaf0] [c0000000008f8cd8] queue_wb_lat_store+0x1dc/0x20c [c0000000721efb50] [c0000000008f8fa0] queue_attr_store+0x12c/0x164 [c0000000721efc60] [c0000000007c11cc] sysfs_kf_write+0x6c/0xb0 [c0000000721efca0] [c0000000007bfa4c] kernfs_fop_write_iter+0x1b8/0x29c [c0000000721efcf0] [c0000000006a281c] vfs_write+0x410/0x584 [c0000000721efdc0] [c0000000006a2cc8] ksys_write+0x84/0x140 [c0000000721efe10] [c000000000031b64] system_call_exception+0x134/0x360 [c0000000721efe50] [c00000000000cedc] system_call_vectored_common+0x15c/0x2ec >From the above log it's apparent that method which writes to sysfs attr wbt_lat_usec acquires q->elevator_lock first, and then acquires q->rq_ qos_mutex. However the another method which writes to io.cost.qos, acquires q->rq_qos_mutex first, and then acquires q->rq_qos_mutex. So this could potentially cause the deadlock. A closer look at ioc_qos_write shows that correcting the lock order is non-trivial because q->rq_qos_mutex is acquired in blkg_conf_open_bdev and released in blkg_conf_exit. The function blkg_conf_open_bdev is responsible for parsing user input and finding the corresponding block device (bdev) from the user provided major:minor number. Since we do not know the bdev until blkg_conf_open_bdev completes, we cannot simply move q->elevator_lock acquisition before blkg_conf_open_ bdev. So to address this, we intoduce new helpers blkg_conf_open_bdev_ frozen and blkg_conf_exit_frozen which are just wrappers around blkg_ conf_open_bdev and blkg_conf_exit respectively. The helper blkg_conf_ open_bdev_frozen is similar to blkg_conf_open_bdev, but additionally freezes the queue, acquires q->elevator_lock and ensures the correct locking order is followed between q->elevator_lock and q->rq_qos_mutex. Similarly another helper blkg_conf_exit_frozen in addition to unfreezing the queue ensures that we release the locks in correct order. By using these helpers, now we maintain the same locking order in all code paths where we update blk-wbt parameters. Fixes: 245618f ("block: protect wbt_lat_usec using q->elevator_lock") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202503171650.cc082b66-lkp@intel.com Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Link: https://lore.kernel.org/r/20250319105518.468941-3-nilay@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have recently seen report of lockdep circular lock dependency warnings on platforms like Skylake and Kabylake: ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3}, at: iommu_probe_device+0x1d/0x70 but task is already holding lock: ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3}, at: intel_iommu_init+0xe75/0x11f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&device->physical_node_lock){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 intel_iommu_init+0xe75/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #5 (dmar_global_lock){++++}-{3:3}: down_read+0x43/0x1d0 enable_drhd_fault_handling+0x21/0x110 cpuhp_invoke_callback+0x4c6/0x870 cpuhp_issue_call+0xbf/0x1f0 __cpuhp_setup_state_cpuslocked+0x111/0x320 __cpuhp_setup_state+0xb0/0x220 irq_remap_enable_fault_handling+0x3f/0xa0 apic_intr_mode_init+0x5c/0x110 x86_late_time_init+0x24/0x40 start_kernel+0x895/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #4 (cpuhp_state_mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __cpuhp_setup_state_cpuslocked+0x67/0x320 __cpuhp_setup_state+0xb0/0x220 page_alloc_init_cpuhp+0x2d/0x60 mm_core_init+0x18/0x2c0 start_kernel+0x576/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #3 (cpu_hotplug_lock){++++}-{0:0}: __cpuhp_state_add_instance+0x4f/0x220 iova_domain_init_rcaches+0x214/0x280 iommu_setup_dma_ops+0x1a4/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_setup_dma_ops+0x16b/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&group->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __iommu_probe_device+0x24c/0x4e0 probe_iommu_group+0x2b/0x50 bus_for_each_dev+0x7d/0xe0 iommu_device_register+0xe1/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 (iommu_probe_device_lock){+.+.}-{3:3}: __lock_acquire+0x1637/0x2810 lock_acquire+0xc9/0x300 __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_probe_device+0x1d/0x70 intel_iommu_init+0xe90/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: iommu_probe_device_lock --> dmar_global_lock --> &device->physical_node_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&device->physical_node_lock); lock(dmar_global_lock); lock(&device->physical_node_lock); lock(iommu_probe_device_lock); *** DEADLOCK *** This driver uses a global lock to protect the list of enumerated DMA remapping units. It is necessary due to the driver's support for dynamic addition and removal of remapping units at runtime. Two distinct code paths require iteration over this remapping unit list: - Device registration and probing: the driver iterates the list to register each remapping unit with the upper layer IOMMU framework and subsequently probe the devices managed by that unit. - Global configuration: Upper layer components may also iterate the list to apply configuration changes. The lock acquisition order between these two code paths was reversed. This caused lockdep warnings, indicating a risk of deadlock. Fix this warning by releasing the global lock before invoking upper layer interfaces for device registration. Fixes: b150654 ("iommu/vt-d: Fix suspicious RCU usage") Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/ Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

With the device instance lock, there is now a possibility of a deadlock: [ 1.211455] ============================================ [ 1.211571] WARNING: possible recursive locking detected [ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted [ 1.211823] -------------------------------------------- [ 1.211936] ip/184 is trying to acquire lock: [ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0 [ 1.212207] [ 1.212207] but task is already holding lock: [ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.212487] [ 1.212487] other info that might help us debug this: [ 1.212626] Possible unsafe locking scenario: [ 1.212626] [ 1.212751] CPU0 [ 1.212815] ---- [ 1.212871] lock(&dev->lock); [ 1.212944] lock(&dev->lock); [ 1.213016] [ 1.213016] *** DEADLOCK *** [ 1.213016] [ 1.213143] May be due to missing lock nesting notation [ 1.213143] [ 1.213294] 3 locks held by ip/184: [ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0 [ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0 [ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.213895] [ 1.213895] stack backtrace: [ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 [ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 1.213994] Call Trace: [ 1.213995] <TASK> [ 1.213996] dump_stack_lvl+0x8e/0xd0 [ 1.214000] print_deadlock_bug+0x28b/0x2a0 [ 1.214020] lock_acquire+0xea/0x2a0 [ 1.214027] __mutex_lock+0xbf/0xd40 [ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI [ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev [ 1.214042] __dev_open+0x145/0x270 [ 1.214046] __dev_change_flags+0xb0/0x1e0 [ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev [ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info [ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0 [ 1.214058] notifier_call_chain+0x78/0x120 [ 1.214062] netif_open+0x6d/0x90 [ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0 [ 1.214066] bond_enslave+0x64c/0x1230 [ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0 [ 1.214077] do_setlink+0x516/0x13b0 [ 1.214094] rtnl_newlink+0xaba/0xb80 [ 1.214132] rtnetlink_rcv_msg+0x440/0x490 [ 1.214144] netlink_rcv_skb+0xeb/0x120 [ 1.214150] netlink_unicast+0x1f9/0x320 [ 1.214153] netlink_sendmsg+0x346/0x3f0 [ 1.214157] __sock_sendmsg+0x86/0xb0 [ 1.214160] ____sys_sendmsg+0x1c8/0x220 [ 1.214164] ___sys_sendmsg+0x28f/0x2d0 [ 1.214179] __x64_sys_sendmsg+0xef/0x140 [ 1.214184] do_syscall_64+0xec/0x1d0 [ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 1.214191] RIP: 0033:0x7f2d1b4a7e56 Device setup: netdevsim0 (down) ^ ^ bond netdevsim1.100@netdevsim1 allmulticast=on (down) When we enslave the lower device (netdevsim0) which has a vlan, we propagate vlan's allmuti/promisc flags during ndo_open. This causes (re)locking on of the real_dev. Propagate allmulti/promisc on flags change, not on the open. There is a slight semantics change that vlans that are down now propagate the flags, but this seems unlikely to result in the real issues. Reproducer: echo 0 1 > /sys/bus/netdevsim/new_device dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*) dev=$(echo $dev_path | rev | cut -d/ -f1 | rev) ip link set dev $dev name netdevsim0 ip link set dev netdevsim0 up ip link add link netdevsim0 name netdevsim0.100 type vlan id 100 ip link set dev netdevsim0.100 allmulticast on down ip link add name bond1 type bond mode 802.3ad ip link set dev netdevsim0 down ip link set dev netdevsim0 master bond1 ip link set dev bond1 up ip link show Reported-by: syzbot+b0c03d76056ef6cd12a6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/Z9CfXjLMKn6VLG5d@mini-arch/T/#m15ba130f53227c883e79fb969687d69d670337a0 Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250313100657.2287455-1-sdf@fomichev.me Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…-bridge-ports' Petr Machata says: ==================== mlxsw: Add VXLAN to the same hardware domain as physical bridge ports Amit Cohen writes: Packets which are trapped to CPU for forwarding in software data path are handled according to driver marking of skb->offload_{,l3}_fwd_mark. Packets which are marked as L2-forwarded in hardware, will not be flooded by the bridge to bridge ports which are in the same hardware domain as the ingress port. Currently, mlxsw does not add VXLAN bridge ports to the same hardware domain as physical bridge ports despite the fact that the device is able to forward packets to and from VXLAN tunnels in hardware. In some scenarios this can result in remote VTEPs receiving duplicate packets. To solve such packets duplication, add VXLAN bridge ports to the same hardware domain as other bridge ports. One complication is ARP suppression which requires the local VTEP to avoid flooding ARP packets to remote VTEPs if the local VTEP is able to reply on behalf of remote hosts. This is currently implemented by having the device flood ARP packets in hardware and trapping them during VXLAN encapsulation, but marking them with skb->offload_fwd_mark=1 so that the bridge will not re-flood them to physical bridge ports. The above scheme will break when VXLAN bridge ports are added to the same hardware domain as physical bridge ports as ARP packets that cannot be suppressed by the bridge will not be able to egress the VXLAN bridge ports due to hardware domain filtering. This is solved by trapping ARP packets when they enter the device and not marking them as being forwarded in hardware. Patch set overview: Patch #1 sets hardware to trap ARP packets at layer 2 Patches #2-#4 are preparations for setting hardwarwe domain of VXLAN Patch #5 sets hardware domain of VXLAN Patch #6 extends VXLAN flood test to verify that this set solves the packets duplication ==================== Link: https://patch.msgid.link/cover.1742224300.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Edward Cree says: ==================== sfc: devlink flash for X4 Updates to support devlink flash on X4 NICs. Patch #2 is needed for NVRAM_PARTITION_TYPE_AUTO, and patch #1 is needed because the latest MCDI headers from firmware no longer include MDIO read/write commands. v1: https://lore.kernel.org/cover.1742223233.git.ecree.xilinx@gmail.com ==================== Link: https://patch.msgid.link/cover.1742493016.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Eduard Zingerman says: ==================== This patch set fixes a bug in copy_verifier_state() where the loop_entry field was not copied. This omission led to incorrect loop_entry fields remaining in env->cur_state, causing incorrect decisions about loop entry assignments in update_loop_entry(). An example of an unsafe program accepted by the verifier due to this bug can be found in patch #2. This bug can also cause an infinite loop in the verifier, see patch #5. Structure of the patch set: - Patch #1 fixes the bug but has a significant negative impact on verification performance for sched_ext programs. - Patch #3 mitigates the verification performance impact of patch #1 by avoiding clean_live_states() for states whose loop_entry is still being verified. This reduces the number of processed instructions for sched_ext programs by 28–92% in some cases. - Patches #5-6 simplify {get,update}_loop_entry() logic (and are not strictly necessary). - Patches #7–10 mitigate the memory overhead introduced by patch #1 when a program with iterator-based loop hits the 1M instruction limit. This is achieved by freeing states in env->free_list when their branches and used_as_loop_entry counts reach zero. Patches #1-4 were previously sent as a part of [1]. [1] https://lore.kernel.org/bpf/20250122120442.3536298-1-eddyz87@gmail.com/ ==================== Link: https://patch.msgid.link/20250215110411.3236773-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Eduard Zingerman says: ==================== veristat: @files-list.txt notation for object files list A few small veristat improvements: - It is possible to hit command line parameters number limit, e.g. when running veristat for all object files generated for test_progs. This patch-set adds an option to read objects files list from a file. - Correct usage of strerror() function. - Avoid printing log lines to CSV output. Changelog: - v1 -> v2: - replace strerror(errno) with strerror(-err) in patch #2 (Andrii) v1: https://lore.kernel.org/bpf/3ee39a16-bc54-4820-984a-0add2b5b5f86@gmail.com/T/ ==================== Link: https://patch.msgid.link/20250301000147.1583999-1-eddyz87@gmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>

…uctions Add several ./test_progs tests: - arena_atomics/load_acquire - arena_atomics/store_release - verifier_load_acquire/* - verifier_store_release/* - verifier_precision/bpf_load_acquire - verifier_precision/bpf_store_release The last two tests are added to check if backtrack_insn() handles the new instructions correctly. Additionally, the last test also makes sure that the verifier "remembers" the value (in src_reg) we store-release into e.g. a stack slot. For example, if we take a look at the test program: #0: r1 = 8; /* store_release((u64 *)(r10 - 8), r1); */ #1: .8byte %[store_release]; #2: r1 = *(u64 *)(r10 - 8); #3: r2 = r10; #4: r2 += r1; #5: r0 = 0; #6: exit; At #1, if the verifier doesn't remember that we wrote 8 to the stack, then later at #4 we would be adding an unbounded scalar value to the stack pointer, which would cause the program to be rejected: VERIFIER LOG: ============= ... math between fp pointer and register with unbounded min value is not allowed For easier CI integration, instead of using built-ins like __atomic_{load,store}_n() which depend on the new __BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft load-acquire/store-release instructions using __imm_insn(), as suggested by Eduard. All new tests depend on: (1) Clang major version >= 18, and (2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or v4), and (3) JIT supports load-acquire/store-release (currently arm64 and x86-64) In .../progs/arena_atomics.c: /* 8-byte-aligned */ __u8 __arena_global load_acquire8_value = 0x12; /* 1-byte hole */ __u16 __arena_global load_acquire16_value = 0x1234; That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to crash: fatal error: error in backend: unable to write nop sequence of 1 bytes To work around such llvm-17 CI job failures, conditionally define __arena_global variables as 64-bit if __clang_major__ < 18, to make sure .addr_space.1 has no holes. Ideally we should avoid compiling this file using clang-17 at all (arena tests depend on __BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but that is a separate topic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Peilin Ye <yepeilin@google.com> Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Eduard Zingerman says: ==================== bpf: simple DFA-based live registers analysis This patch-set introduces a simple live registers DFA analysis. Analysis is done as a separate step before main verification pass. Results are stored in the env->insn_aux_data for each instruction. The change helps with iterator/callback based loops handling, as regular register liveness marks are not finalized while loops are processed. See veristat results in patch #2. Note: for regular subprogram calls analysis conservatively assumes that r1-r5 are used, and r0 is used at each 'exit' instruction. Experiments show that adding logic handling these cases precisely has no impact on verification performance. The patch set was tested by disabling the current register parentage chain liveness computation, using DFA-based liveness for registers while assuming all stack slots as live. See discussion in [1]. Changes v2 -> v3: - added support for BPF_LOAD_ACQ, BPF_STORE_REL atomics (Alexei); - correct use marks for r0 for BPF_CMPXCHG. Changes v1 -> v2: - added a refactoring commit extracting utility functions: jmp_offset(), verbose_insn() (Alexei); - added a refactoring commit extracting utility function get_call_summary() in order to share helper/kfunc related code with mark_fastcall_pattern_for_call() (Alexei); - comment in the compute_insn_live_regs() extended (Alexei). Changes RFC -> v1: - parameter count for helpers and kfuncs is taken into account; - copy_verifier_state() bugfix had been merged as a separate patch-set and is no longer a part of this patch set. RFC: https://lore.kernel.org/bpf/20250122120442.3536298-1-eddyz87@gmail.com/ v1: https://lore.kernel.org/bpf/20250228060032.1425870-1-eddyz87@gmail.com/ v2: https://lore.kernel.org/bpf/20250304074239.2328752-1-eddyz87@gmail.com/ [1] https://lore.kernel.org/bpf/cc29975fbaf163d0c2ed904a9a4d6d9452177542.camel@gmail.com/ ==================== Link: https://patch.msgid.link/20250304195024.2478889-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode. I can easily reproduce it with the follwing command. $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak $ perf record --latency -g -- ./perf test -w thloop $ perf report -H --stdio ... Indirect leak of 168 byte(s) in 21 object(s) allocated from: #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75 #1 0x55ed3602346e in map__get util/map.h:189 #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476 #3 0x55ed36025208 in hist_entry__new util/hist.c:588 #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587 #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638 #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685 #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776 #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735 #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119 #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867 #11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351 #12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404 #13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448 #14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556 #15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 ... $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 93 I found that hist_entry__delete() missed to release child entries in the hierarchy tree (hroot_{in,out}). It needs to iterate the child entries and call hist_entry__delete() recursively. After this change: $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 0 Reported-by: Ian Rogers <irogers@google.com> Tested-by Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD. For a pipe data, it reads the header data including pmu_mapping from PERF_RECORD_HEADER_FEATURE runtime. But it's already set in: perf_session__new() __perf_session__new() evlist__init_trace_event_sample_raw() evlist__has_amd_ibs() perf_env__nr_pmu_mappings() Then it'll overwrite that when it processes the HEADER_FEATURE record. Here's a report from address sanitizer. Direct leak of 2689 byte(s) in 1 object(s) allocated from: #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98 #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64 #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25 #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362 #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517 #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315 #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23 #7 0x5595a7d7f893 in __perf_session__new util/session.c:179 #8 0x5595a7b79572 in perf_session__new util/session.h:115 #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603 #10 0x5595a7c019eb in run_builtin perf.c:351 #11 0x5595a7c01c92 in handle_internal_command perf.c:404 #12 0x5595a7c01deb in run_argv perf.c:448 #13 0x5595a7c02134 in main perf.c:556 #14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Let's free the existing pmu_mapping data if any. Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Patch series "mm: reliable huge page allocator". This series makes changes to the allocator and reclaim/compaction code to try harder to avoid fragmentation. As a result, this makes huge page allocations cheaper, more reliable and more sustainable. It's a subset of the huge page allocator RFC initially proposed here: https://lore.kernel.org/lkml/20230418191313.268131-1-hannes@cmpxchg.org/ The following results are from a kernel build test, with additional concurrent bursts of THP allocations on a memory-constrained system. Comparing before and after the changes over 15 runs: before after Hugealloc Time mean 52739.45 ( +0.00%) 28904.00 ( -45.19%) Hugealloc Time stddev 56541.26 ( +0.00%) 33464.37 ( -40.81%) Kbuild Real time 197.47 ( +0.00%) 196.59 ( -0.44%) Kbuild User time 1240.49 ( +0.00%) 1231.67 ( -0.71%) Kbuild System time 70.08 ( +0.00%) 59.10 ( -15.45%) THP fault alloc 46727.07 ( +0.00%) 63223.67 ( +35.30%) THP fault fallback 21910.60 ( +0.00%) 5412.47 ( -75.29%) Direct compact fail 195.80 ( +0.00%) 59.07 ( -69.48%) Direct compact success 7.93 ( +0.00%) 2.80 ( -57.46%) Direct compact success rate % 3.51 ( +0.00%) 3.99 ( +10.49%) Compact daemon scanned migrate 3369601.27 ( +0.00%) 2267500.33 ( -32.71%) Compact daemon scanned free 5075474.47 ( +0.00%) 2339773.00 ( -53.90%) Compact direct scanned migrate 161787.27 ( +0.00%) 47659.93 ( -70.54%) Compact direct scanned free 163467.53 ( +0.00%) 40729.67 ( -75.08%) Compact total migrate scanned 3531388.53 ( +0.00%) 2315160.27 ( -34.44%) Compact total free scanned 5238942.00 ( +0.00%) 2380502.67 ( -54.56%) Alloc stall 2371.07 ( +0.00%) 638.87 ( -73.02%) Pages kswapd scanned 2160926.73 ( +0.00%) 4002186.33 ( +85.21%) Pages kswapd reclaimed 533191.07 ( +0.00%) 718577.80 ( +34.77%) Pages direct scanned 400450.33 ( +0.00%) 355172.73 ( -11.31%) Pages direct reclaimed 94441.73 ( +0.00%) 31162.80 ( -67.00%) Pages total scanned 2561377.07 ( +0.00%) 4357359.07 ( +70.12%) Pages total reclaimed 627632.80 ( +0.00%) 749740.60 ( +19.46%) Swap out 47959.53 ( +0.00%) 110084.33 ( +129.53%) Swap in 7276.00 ( +0.00%) 24457.00 ( +236.10%) File refaults 138043.00 ( +0.00%) 188226.93 ( +36.35%) THP latencies are cut in half, and failure rates are cut by 75%. These metrics also hold up over time, while the vanilla kernel sees a steady downward trend in success rates with each subsequent run, owed to the cumulative effects of fragmentation. A more detailed discussion of results is in the patch changelogs. The patches first introduce a vm.defrag_mode sysctl, which enforces the existing ALLOC_NOFRAGMENT alloc flag until after reclaim and compaction have run. They then change kswapd and kcompactd to target pageblocks, which boosts success in the ALLOC_NOFRAGMENT hotpaths. Patches #1 and #2 are somewhat unrelated cleanups, but touch the same code and so are included here to avoid conflicts from re-ordering. This patch (of 5): compaction_suitable() hardcodes the min watermark, with a boost to the low watermark for costly orders. However, compaction_ready() requires order-0 at the high watermark. It currently checks the marks twice. Make the watermark a parameter to compaction_suitable() and have the callers pass in what they require: - compaction_zonelist_suitable() is used by the direct reclaim path, so use the min watermark. - compact_suit_allocation_order() has a watermark in context derived from cc->alloc_flags. The only quirk is that kcompactd doesn't initialize cc->alloc_flags explicitly. There is a direct check in kcompactd_do_work() that passes ALLOC_WMARK_MIN, but there is another check downstack in compact_zone() that ends up passing the unset alloc_flags. Since they default to 0, and that coincides with ALLOC_WMARK_MIN, it is correct. But it's subtle. Set cc->alloc_flags explicitly. - should_continue_reclaim() is direct reclaim, use the min watermark. - Finally, consolidate the two checks in compaction_ready() to a single compaction_suitable() call passing the high watermark. There is a tiny change in behavior: before, compaction_suitable() would check order-0 against min or low, depending on costly order. Then there'd be another high watermark check. Now, the high watermark is passed to compaction_suitable(), and the costly order-boost (low - min) is added on top. This means compaction_ready() sets a marginally higher target for free pages. In a kernelbuild + THP pressure test, though, this didn't show any measurable negative effects on memory pressure or reclaim rates. As the comment above the check says, reclaim is usually stopped short on should_continue_reclaim(), and this just defines the worst-case reclaim cutoff in case compaction is not making any headway. [hughd@google.com: stop oops on out-of-range highest_zoneidx] Link: https://lkml.kernel.org/r/005ace8b-07fa-01d4-b54b-394a3e029c07@google.com Link: https://lkml.kernel.org/r/20250313210647.1314586-1-hannes@cmpxchg.org Link: https://lkml.kernel.org/r/20250313210647.1314586-2-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

bergwolf mentioned this pull request May 26, 2013

staging/lustre: fix procfs changes #1

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

staging/lustre: adapt proc_dir_entry change #2

staging/lustre: adapt proc_dir_entry change #2

bergwolf commented May 26, 2013

staging/lustre: adapt proc_dir_entry change #2

staging/lustre: adapt proc_dir_entry change #2

Conversation

bergwolf commented May 26, 2013