[pull] master from torvalds:master #39
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
In order to properly display information regardless of the page size, it is necessary to take into account real page size. Fixes: cabe813 ("powerpc: dump as a single line areas mapping a single physical page.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a53b2a0ffd042a8d85464bf90d55bc5b970e00a1.1589866984.git.christophe.leroy@csgroup.eu
The 8xx is about to map kernel linear space and IMMR using huge pages. In order to display those pages properly, ptdump needs to handle hugepd tables at PGD level. For the time being do it only at PGD level. Further patches may add handling of hugepd tables at lower level for other platforms when needed in the future. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/630728289158dcfeb06b14d40ed7c4c4e7148cf1.1589866984.git.christophe.leroy@csgroup.eu
Mapping RO data as ROX is not an issue since that data cannot be modified to introduce an exploit. PPC64 accepts to have RO data mapped ROX, as a trade off between kernel size and strictness of protection. On PPC32, kernel size is even more critical as amount of memory is usually small. Depending on the number of available IBATs, the last IBATs might overflow the end of text. Only warn if it crosses the end of RO data. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.1589866984.git.christophe.leroy@csgroup.eu
Allocate static page tables for the fixmap area. This allows setting mappings through page tables before memblock is ready. That's needed to use early_ioremap() early and to use standard page mappings with fixmap. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4f4b1412d34de6801b8e925cb88fc69d056ff536.1589866984.git.christophe.leroy@csgroup.eu
…ks on PPC32. Setting init mem to NX shall depend on sinittext being mapped by block, not on stext being mapped by block. Setting text and rodata to RO shall depend on stext being mapped by block, not on sinittext being mapped by block. Fixes: 63b2bc6 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7d565fb8f51b18a3d98445a830b2f6548cb2da2a.1589866984.git.christophe.leroy@csgroup.eu
Only 40x still uses PTE_ATOMIC_UPDATES. 40x cannot not select CONFIG_PTE64_BIT. Drop handling of PTE_ATOMIC_UPDATES: - In nohash/64 - In nohash/32 for CONFIG_PTE_64BIT Keep PTE_ATOMIC_UPDATES only for nohash/32 for !CONFIG_PTE_64BIT Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d6f8e1f46583f1842de24581a68b0496feb15516.1589866984.git.christophe.leroy@csgroup.eu
When CONFIG_PTE_64BIT is set, pte_update() operates on 'unsigned long long' When CONFIG_PTE_64BIT is not set, pte_update() operates on 'unsigned long' In asm/page.h, we have pte_basic_t which is 'unsigned long long' when CONFIG_PTE_64BIT is set and 'unsigned long' otherwise. Refactor pte_update() using pte_basic_t. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/590d67994a2847cd9fe088f7d974499e3a18b6ac.1589866984.git.christophe.leroy@csgroup.eu
When CONFIG_PTE_64BIT is set, pte_update() operates on 'unsigned long long' When CONFIG_PTE_64BIT is not set, pte_update() operates on 'unsigned long' In asm/page.h, we have pte_basic_t which is 'unsigned long long' when CONFIG_PTE_64BIT is set and 'unsigned long' otherwise. Refactor pte_update() using pte_basic_t. While we are at it, drop the comment on 44x which is not applicable to book3s version of pte_update(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c78912bc8613fb249c3d80aeb1062796b5c49400.1589866984.git.christophe.leroy@csgroup.eu
…PPC32 and PPC64 On PPC32, __ptep_test_and_clear_young() takes the mm->context.id In preparation of standardising pte_update() params between PPC32 and PPC64, __ptep_test_and_clear_young() need mm instead of mm->context.id Replace context param by mm. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0a65470e50a14373b7c2291184514aa982462255.1589866984.git.christophe.leroy@csgroup.eu
PPC64 takes 3 additional parameters compared to PPC32: - mm - address - huge These 3 parameters will be needed in order to perform different action depending on the page size on the 8xx. Make pte_update() prototype identical for PPC32 and PPC64. This allows dropping an #ifdef in huge_ptep_get_and_clear(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/38111acf6841047a8addde37c63e92d611ee38c2.1589866984.git.christophe.leroy@csgroup.eu
pte_update() is a bit special for the 8xx. At the time being, that's an #ifdef inside the nohash/32 pte_update(). As we are going to make it even more special in the coming patches, create a dedicated version for pte_update() for 8xx. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a103be0099ac2360f8c44f4a1a63cc03713a1360.1589866984.git.christophe.leroy@csgroup.eu
Commit 55c8fc3 ("powerpc/8xx: reintroduce 16K pages with HW assistance") redefined pte_t as a struct of 4 pte_basic_t, because in 16K pages mode there are four identical entries in the page table. But hugepd entries for 8M pages require only one entry of size pte_basic_t. So there is no point in creating a cache for 4 entries page tables. Calculate PTE_T_ORDER using the size of pte_basic_t instead of pte_t. Define specific huge_pte helpers (set_huge_pte_at(), huge_pte_clear(), huge_ptep_set_wrprotect()) to write the pte in a single entry instead of using set_pte_at() which writes 4 identical entries in 16k pages mode. Also make sure that __ptep_set_access_flags() properly handle the huge_pte case. Define set_pte_filter() inline otherwise GCC doesn't inline it anymore because it is now used twice, and that gives a pretty suboptimal code because of pte_t being a struct of 4 entries. Those functions are also used for 512k pages which only require one entry as well allthough replicating it four times was harmless as 512k pages entries are spread every 128 bytes in the table. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/43050d1a0c2d6e1541cab9c1126fc80bc7015ebd.1589866984.git.christophe.leroy@csgroup.eu
CONFIG_8xx_COPYBACK was there to help disabling copyback cache mode for debuging hardware. But nobody will design new boards with 8xx now. All 8xx platforms select it, so make it the default and remove the option. Also remove the Mx_RESETVAL values which are pretty useless and hide the real value while reading code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bcc968cda075516eb76e2f25e09821f582c566b4.1589866984.git.christophe.leroy@csgroup.eu
Prepare ITLB handler to handle _PAGE_HUGE when CONFIG_HUGETLBFS is enabled. This means that the L1 entry has to be kept in r11 until L2 entry is read, in order to insert _PAGE_HUGE into it. Also move pgd_offset helpers before pte_update() as they will be needed there in next patch. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/21fd1de8fba781bededa9474a5a9374aefb1f849.1589866984.git.christophe.leroy@csgroup.eu
At the time being, 512k huge pages are handled through hugepd page tables. The PMD entry is flagged as a hugepd pointer and it means that only 512k hugepages can be managed in that 4M block. However, the hugepd table has the same size as a normal page table, and 512k entries can therefore be nested with normal pages. On the 8xx, TLB loading is performed by software and allthough the page tables are organised to match the L1 and L2 level defined by the HW, all TLB entries have both L1 and L2 independent entries. It means that even if two TLB entries are associated with the same PMD entry, they can be loaded with different values in L1 part. The L1 entry contains the page size (PS field): - 00 for 4k and 16 pages - 01 for 512k pages - 11 for 8M pages By adding a flag for hugepages in the PTE (_PAGE_HUGE) and copying it into the lower bit of PS, we can then manage 512k pages with normal page tables: - PMD entry has PS=11 for 8M pages - PMD entry has PS=00 for other pages. As a PMD entry covers 4M areas, a PMD will either point to a hugepd table having a single entry to an 8M page, or the PMD will point to a standard page table which will have either entries to 4k or 16k or 512k pages. For 512k pages, as the L1 entry will not know it is a 512k page before the PTE is read, there will be 128 entries in the PTE as if it was 4k pages. But when loading the TLB, it will be flagged as a 512k page. Note that we can't use pmd_ptr() in asm/nohash/32/pgtable.h because it is not defined yet. In ITLB miss, we keep the possibility to opt it out as when kernel text is pinned and no user hugepages are used, we can save several instruction by not using r11. In DTLB miss, that's just one instruction so it's not worth bothering with it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/002819e8e166bf81d24b24782d98de7c40905d8f.1589866984.git.christophe.leroy@csgroup.eu
512k pages are now standard pages, so only 8M pages are hugepte. No more handling of normal page tables through hugepd allocation and freeing, and hugepte helpers can also be simplified. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2c6135d57fb76eebf70673fbac3dc9e740767879.1589866984.git.christophe.leroy@csgroup.eu
As the 8xx now manages 512k pages in standard page tables, it doesn't need CONFIG_PPC_MM_SLICES anymore. Don't select it anymore and remove all related code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/98e8ccd424476ea73cced2b89ba38eb2ed8144fb.1589866984.git.christophe.leroy@csgroup.eu
PPC_PIN_TLB options are dedicated to the 8xx, move them into the 8xx Kconfig. While we are at it, add some text to explain what it does. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1ece39fac6312e1d14e6a67b3f9d9f9f91990a7b.1589866984.git.christophe.leroy@csgroup.eu
Pinned TLBs cannot be modified when the MMU is enabled. Create a function to rewrite the pinned TLB entries with MMU off. To set pinned TLB, we have to turn off MMU, disable pinning, do a TLB flush (Either with tlbie and tlbia) then reprogam the TLB entries, enable pinning and turn on MMU. If using tlbie, it cleared entries in both instruction and data TLB regardless whether pinning is disabled or not. If using tlbia, it clears all entries of the TLB which has disabled pinning. To make it easy, just clear all entries in both TLBs, and reprogram them. The function takes two arguments, the top of the memory to consider and whether data is RO under _sinittext. When DEBUG_PAGEALLOC is set, the top is the end of kernel rodata. Otherwise, that's the top of physical RAM. Everything below _sinittext is set RX, over _sinittext that's RW. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c17806014bb1c06513ad1e1d510faea31984b177.1589866984.git.christophe.leroy@csgroup.eu
Only early debug requires IMMR to be mapped early. No need to set it up and pin it in assembly. Map it through page tables at udbg init when necessary. If CONFIG_PIN_TLB_IMMR is selected, pin it once we don't need the 32 Mb pinned RAM anymore. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/13c1e8539fdf363d3146f4884e5c3c76c6c308b5.1589866984.git.christophe.leroy@csgroup.eu
At startup, map 32 Mbytes of memory through 4 pages of 8M, and PIN them inconditionnaly. They need to be pinned because KASAN is using page tables early and the TLBs might be dynamically replaced otherwise. Remove RSV4I flag after installing mappings unless CONFIG_PIN_TLB_XXXX is selected. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b27c5767d18053b59f7eefddc189fcc3acf7b9c2.1589866984.git.christophe.leroy@csgroup.eu
… TLB handlers Up to now, linear and IMMR mappings are managed via huge TLB entries through specific code directly in TLB miss handlers. This implies some patching of the TLB miss handlers at startup, and a lot of dedicated code. Remove all this specific dedicated code. For now we are back to normal handling via standard 4k pages. In the next patches, linear memory mapping and IMMR mapping will be managed through huge pages. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/221b7e3ead80a5969629938c023f8cfe45fdd2fb.1589866984.git.christophe.leroy@csgroup.eu
The code to setup linear and IMMR mapping via huge TLB entries is not called anymore. Remove it. Also remove the handling of removed code exits in the perf driver. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/75750d25849cb8e73ca519866bb892d7eb9649c0.1589866984.git.christophe.leroy@csgroup.eu
Now that space have been freed next to the DTLB miss handler, it's associated DTLB perf handling can be brought back in the same place. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/97f48cc1a2ea6b895bfac0752cbe59deaf2eecda.1589866984.git.christophe.leroy@csgroup.eu
Similar to PPC64, accept to map RO data as ROX as a trade off between between security and memory usage. Having RO data executable is not a high risk as RO data can't be modified to forge an exploit. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c4a0d89d944eed984dd941e509614031a5ace2b.1589866984.git.christophe.leroy@csgroup.eu
Now that linear and IMMR dedicated TLB handling is gone, kernel boundary address comparison is similar in ITLB miss handler and in DTLB miss handler. Create a macro named compare_to_kernel_boundary. When TASK_SIZE is strictly below 0x80000000 and PAGE_OFFSET is above 0x80000000, it is enough to compare to 0x8000000, and this can be done with a single instruction. Using not. instruction, we get to use 'blt' conditional branch as when doing a regular comparison: 0x00000000 <= addr <= 0x7fffffff ==> 0xffffffff >= NOT(addr) >= 0x80000000 The above test corresponds to a 'blt' Otherwise, do a regular comparison using two instructions. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6312575d06a8813105e6564a3b12e1d373aa1b2f.1589866984.git.christophe.leroy@csgroup.eu
Add a function to early map kernel memory using huge pages. For 512k pages, just use standard page table and map in using 512k pages. For 8M pages, create a hugepd table and populate the two PGD entries with it. This function can only be used to create page tables at startup. Once the regular SLAB allocation functions replace memblock functions, this function cannot allocate new pages anymore. However it can still update existing mappings with new protections. hugepd_none() macro is moved into asm/hugetlb.h to be usable outside of mm/hugetlbpage.c early_pte_alloc_kernel() is made visible. _PAGE_HUGE flag is now displayed by ptdump. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Change ptdump display to use "huge"] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/68325bcd3b6f93127f7810418a2352c3519066d6.1589866984.git.christophe.leroy@csgroup.eu
Map the IMMR area with a single 512k huge page. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9495dba06669da40e133f24607758fa6dcc65f66.1589866984.git.christophe.leroy@csgroup.eu
Map linear memory space with 512k and 8M pages whenever possible. Three mappings are performed: - One for kernel text - One for RO data - One for the rest Separating the mappings is done to be able to update the protection later when using STRICT_KERNEL_RWX. The ITLB miss handler now need to also handle huge TLBs unless kernel text in pinned. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c44f0ab5510474f25123d904cd1f4e5c6aa3c1ac.1589866984.git.christophe.leroy@csgroup.eu
Pinned TLB are 8M. Now that there is no strict boundary anymore between text and RO data, it is possible to use 8M pinned executable TLB that covers both text and RO data. When PIN_TLB_DATA or PIN_TLB_TEXT is selected, enforce 8M RW data alignment and allow STRICT_KERNEL_RWX. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c535fc97bf0dd8693192e25feeed8088701e00c6.1589866984.git.christophe.leroy@csgroup.eu
Instead of counting the number of reserved zones in dmz_free_zone(), mark the zone as 'reserved' during allocation and simplify dmz_free_zone(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The zones array is getting really large, and large arrays tend to wreak havoc with the CPU caches. So convert it to xarray to become more cache friendly. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Checking the tertiary superblock just consists of validating UUIDs, crcs, and the generation number; it doesn't have contents which would be required during the actual operation. So allocate a temporary superblock when checking tertiary devices to avoid having to store it together with the 'real' superblocks. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a pointer, to the containing device, within struct dm_zone and kill dmz_zone_to_dev(). Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add a metadata pointer within struct dmz_dev and use it as argument for blkdev_report_zones() instead of the metadata itself. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of having one reclaim workqueue for the entire set we should be allocating a reclaim workqueue per device; doing so will reduce contention and should boost performance for a multi-device setup. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Random and sequential zones should be part of the respective device structure to make arbitration between devices possible. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove the hard-coded limit of two devices and support an unlimited number of additional zoned devices. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When allocating a zone, pass in an indicator on which device the zone should be allocated; this increases performance for a multi-device setup because reclaim will now allocate zones on the device for which reclaim is running. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
per-device reclaim should select zones on that device only. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Prefer full zones when selecting the next zone for reclaim. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When specifying several devices the superblock location must be checked to ensure the devices are specified in the correct order. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Remove micro-optimization that infers device is between presuspend and resume (was done purely to avoid call to dm_noflush_suspending, which isn't expensive anyway). Remove flags argument since they are no longer checked. And remove must_push_back_bio() since it was simply a call to __must_push_back(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Do not allow saving disabled queue_if_no_path if already saved as enabled; implies multiple suspends (which shouldn't ever happen). Log if this unlikely scenario is ever triggered. Also, only write MPATHF_SAVED_QUEUE_IF_NO_PATH during presuspend or if "fail_if_no_path" message. MPATHF_SAVED_QUEUE_IF_NO_PATH is no longer always modified, e.g.: even if queue_if_no_path()'s save_old_value argument wasn't set. This just implies a bit tighter control over the management of MPATHF_SAVED_QUEUE_IF_NO_PATH. Side-effect is multipath_resume() doesn't reset MPATHF_QUEUE_IF_NO_PATH unless MPATHF_SAVED_QUEUE_IF_NO_PATH was set (during presuspend); and at that time the MPATHF_SAVED_QUEUE_IF_NO_PATH bit gets cleared. So MPATHF_SAVED_QUEUE_IF_NO_PATH's use is much more narrow in scope. Last, but not least, do _not_ disable queue_if_no_path during noflush suspend. There is no need/benefit to saving off queue_if_no_path via MPATHF_SAVED_QUEUE_IF_NO_PATH and clearing MPATHF_QUEUE_IF_NO_PATH for noflush suspend -- by avoiding this needless queue_if_no_path flag churn there is less potential for MPATHF_QUEUE_IF_NO_PATH to get lost. Which avoids potential for IOs to be errored back up to userspace during DM multipath's handling of path failures. That said, this last change papers over a reported issue concerning request-based dm-multipath's interaction with blk-mq, relative to suspend and resume: multipath_endio is being called _before_ multipath_resume. This should never happen if DM suspend's blk_mq_quiesce_queue() + dm_wait_for_completion() is genuinely waiting for all inflight blk-mq requests to complete. Similarly: drivers/md/dm.c:__dm_resume() clearly calls dm_table_resume_targets() _before_ dm_start_queue()'s blk_mq_unquiesce_queue() is called. If the queue isn't even restarted until after multipath_resume(); the BIG question that still needs answering is: how can multipath_end_io beat multipath_resume in a race!? Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add more DMDEBUG that shows arguments passed and caller, and another that shows state of related flags at end of queue_if_no_path(). Also add queue_if_no_path DMDEBUG to multipath_resume(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When there are many DM multipath devices it really helps to have additional context for which DM device a failed or reinstated path is part of. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
queue_limits::logical_block_size got changed from unsigned short to unsigned int, but it was forgotten to update crypt_io_hints() to use the new type. Fix it. Fixes: ad6bf88 ("block: fix an integer overflow in logical block size") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
…rnel/git/jeyu/linux Pull module updates from Jessica Yu: - Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has SHF_WRITE|SHF_EXECINSTR sections - Remove and clean up nested #ifdefs, as it makes code hard to read * tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Harden STRICT_MODULE_RWX module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs
…l/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. * tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits) powerpc/pseries: Make vio and ibmebus initcalls pseries specific cxl: Remove dead Kconfig options powerpc: Add POWER10 architected mode powerpc/dt_cpu_ftrs: Add MMA feature powerpc/dt_cpu_ftrs: Enable Prefixed Instructions powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected powerpc: Add support for ISA v3.1 powerpc: Add new HWCAP bits powerpc/64s: Don't set FSCR bits in INIT_THREAD powerpc/64s: Save FSCR to init_task.thread.fscr after feature init powerpc/64s: Don't let DT CPU features set FSCR_DSCR powerpc/64s: Don't init FSCR_DSCR in __init_FSCR() powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations powerpc/module_64: Consolidate ftrace code powerpc/32: Disable KASAN with pages bigger than 16k powerpc/uaccess: Don't set KUEP by default on book3s/32 powerpc/uaccess: Don't set KUAP by default on book3s/32 powerpc/8xx: Reduce time spent in allow_user_access() and friends ...
…/linux/kernel/git/tip/tip Pull READ_IMPLIES_EXEC changes from Borislav Petkov: "Split the old READ_IMPLIES_EXEC workaround from executable PT_GNU_STACK now that toolchains long support PT_GNU_STACK marking and there's no need anymore to force modern programs into having all its user mappings executable instead of only the stack and the PROT_EXEC ones. Disable that automatic READ_IMPLIES_EXEC forcing on x86-64 and arm64. Add tables documenting how READ_IMPLIES_EXEC is handled on x86-64, arm and arm64. By Kees Cook" * tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/elf: Disable automatic READ_IMPLIES_EXEC for 64-bit address spaces arm32/64/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK arm32/64/elf: Add tables to document READ_IMPLIES_EXEC x86/elf: Disable automatic READ_IMPLIES_EXEC on 64-bit x86/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK x86/elf: Add table to document READ_IMPLIES_EXEC
Pull VFIO updates from Alex Williamson: - Block accesses to disabled MMIO space (Alex Williamson) - VFIO device migration API (Kirti Wankhede) - type1 IOMMU dirty bitmap API and implementation (Kirti Wankhede) - PCI NULL capability masking (Alex Williamson) - Memory leak fixes (Qian Cai) - Reference leak fix (Qiushi Wu) * tag 'vfio-v5.8-rc1' of git://github.com/awilliam/linux-vfio: vfio iommu: typecast corrections vfio iommu: Use shift operation for 64-bit integer division vfio/mdev: Fix reference count leak in add_mdev_supported_type vfio: Selective dirty page tracking if IOMMU backed device pins pages vfio iommu: Add migration capability to report supported features vfio iommu: Update UNMAP_DMA ioctl to get dirty bitmap before unmap vfio iommu: Implementation of ioctl for dirty pages tracking vfio iommu: Add ioctl definition for dirty pages tracking vfio iommu: Cache pgsize_bitmap in struct vfio_iommu vfio iommu: Remove atomicity of ref_count of pinned pages vfio: UAPI for migration interface for device state vfio/pci: fix memory leaks of eventfd ctx vfio/pci: fix memory leaks in alloc_perm_bits() vfio-pci: Mask cap zero vfio-pci: Invalidate mmaps and block MMIO access on disabled memory vfio-pci: Fault mmaps to enable vma tracking vfio/type1: Support faulting PFNMAP vmas
Pull IPMI updates from Corey Minyard: "A few small fixes for things, nothing earth shattering" * tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi: ipmi:ssif: Remove dynamic platform device handing Try to load acpi_ipmi when an SSIF ACPI IPMI interface is added ipmi_si: Load acpi_ipmi when ACPI IPMI interface added ipmi:bt-bmc: Fix error handling and status check ipmi: Replace guid_copy() with import_guid() where it makes sense ipmi: use vzalloc instead of kmalloc for user creation ipmi:bt-bmc: Fix some format issue of the code ipmi:bt-bmc: Avoid unnecessary check
…git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.8 kernel cycle.
Core changes:
- A new GPIO aggregator driver has been merged: this can join a few
select GPIO lines into a new aggregated GPIO chip. This can be used
for security: a process can be granted access to only these lines,
for example for industrial control. Another way to use this is to
reexpose certain select lines to a virtual machine or container.
- Warn if the gpio-line-names is too long in he DT parser core.
- GPIO lines can now be looked up by line name in addition to being
looked up by offset.
New drivers:
- A new generic regmap GPIO driver has been merged. Too many regmap
drivers are starting to look like each other so we need to create
some common ground and try to move drivers over to using that.
- The F7188X driver now supports F81865.
Driver improvements:
- Large improvements to the PCA953x expander, get multiple lines and
several cleanups.
- Large improvements to the DesignWare DWAPB driver, and Sergey Semin
has volunteered to maintain it.
- PL061 can now be built as a module, this is part of a bigger effort
to make the ARM platforms more modular"
* tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
gpio: pca953x: Drop unneeded ACPI_PTR()
MAINTAINERS: Add gpio regmap section
gpio: add a reusable generic gpio_chip using regmap
gpiolib: Introduce gpiochip_irqchip_add_domain()
gpio: gpiolib: Allow GPIO IRQs to lazy disable
gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional
gpio: rcar: Fix runtime PM imbalance on error
gpio: pca935x: Allow IRQ support for driver built as a module
gpio: pxa: Add COMPILE_TEST support
dt-bindings: gpio: Add renesas,em-gio bindings
MAINTAINERS: Fix file name for DesignWare GPIO DT schema
gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property
gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt
gpio: dwapb: avoid error message for optional IRQ
gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
gpio: max730x: bring gpiochip_add_data after port config
MAINTAINERS: Add GPIO Aggregator section
docs: gpio: Add GPIO Aggregator documentation
gpio: Add GPIO Aggregator
gpiolib: Add support for GPIO lookup by line name
...
…t/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
…t/jejb/scsi Pull SCSI updates from James Bottomley: :This series consists of the usual driver updates (qla2xxx, ufs, zfcp, target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of other minor updates. There are no major core changes in this series apart from a refactoring in scsi_lib.c" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes scsi: cxgb3i: Fix some leaks in init_act_open() scsi: ibmvscsi: Make some functions static scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim scsi: ufs: Fix WriteBooster flush during runtime suspend scsi: ufs: Fix index of attributes query for WriteBooster feature scsi: ufs: Allow WriteBooster on UFS 2.2 devices scsi: ufs: Remove unnecessary memset for dev_info scsi: ufs-qcom: Fix scheduling while atomic issue scsi: mpt3sas: Fix reply queue count in non RDPQ mode scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd() scsi: vhost: Notify TCM about the maximum sg entries supported per command scsi: qla2xxx: Remove return value from qla_nvme_ls() scsi: qla2xxx: Remove an unused function scsi: iscsi: Register sysfs for iscsi workqueue scsi: scsi_debug: Parser tables and code interaction scsi: core: Refactor scsi_mq_setup_tags function scsi: core: Fix incorrect usage of shost_for_each_device scsi: qla2xxx: Fix endianness annotations in source files ...
…kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - The largest change for this cycle is the DM zoned target's metadata version 2 feature that adds support for pairing regular block devices with a zoned device to ease the performance impact associated with finite random zones of zoned device. The changes came in three batches: the first prepared for and then added the ability to pair a single regular block device, the second was a batch of fixes to improve zoned's reclaim heuristic, and the third removed the limitation of only adding a single additional regular block device to allow many devices. Testing has shown linear scaling as more devices are added. - Add new emulated block size (ebs) target that emulates a smaller logical_block_size than a block device supports The primary use-case is to emulate "512e" devices that have 512 byte logical_block_size and 4KB physical_block_size. This is useful to some legacy applications that otherwise wouldn't be able to be used on 4K devices because they depend on issuing IO in 512 byte granularity. - Add discard interfaces to DM bufio. First consumer of the interface is the dm-ebs target that makes heavy use of dm-bufio. - Fix DM crypt's block queue_limits stacking to not truncate logic_block_size. - Add Documentation for DM integrity's status line. - Switch DMDEBUG from a compile time config option to instead use dynamic debug via pr_debug. - Fix DM multipath target's hueristic for how it manages "queue_if_no_path" state internally. DM multipath now avoids disabling "queue_if_no_path" unless it is actually needed (e.g. in response to configure timeout or explicit "fail_if_no_path" message). This fixes reports of spurious -EIO being reported back to userspace application during fault tolerance testing with an NVMe backend. Added various dynamic DMDEBUG messages to assist with debugging queue_if_no_path in the future. - Add a new DM multipath "Historical Service Time" Path Selector. - Fix DM multipath's dm_blk_ioctl() to switch paths on IO error. - Improve DM writecache target performance by using explicit cache flushing for target's single-threaded usecase and a small cleanup to remove unnecessary test in persistent_memory_claim. - Other small cleanups in DM core, dm-persistent-data, and DM integrity. * tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits) dm crypt: avoid truncating the logical block size dm mpath: add DM device name to Failing/Reinstating path log messages dm mpath: enhance queue_if_no_path debugging dm mpath: restrict queue_if_no_path state machine dm mpath: simplify __must_push_back dm zoned: check superblock location dm zoned: prefer full zones for reclaim dm zoned: select reclaim zone based on device index dm zoned: allocate zone by device index dm zoned: support arbitrary number of devices dm zoned: move random and sequential zones into struct dmz_dev dm zoned: per-device reclaim dm zoned: add metadata pointer to struct dmz_dev dm zoned: add device pointer to struct dm_zone dm zoned: allocate temporary superblock for tertiary devices dm zoned: convert to xarray dm zoned: add a 'reserved' zone flag dm zoned: improve logging messages for reclaim dm zoned: avoid unnecessary device recalulation for secondary superblock dm zoned: add debugging message for reading superblocks ...
pull bot
pushed a commit
that referenced
this pull request
Apr 26, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
May 21, 2024
Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ #39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ #39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]. Want to support this open source service? Please star it : )