[pull] master from torvalds:master #318
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
…ogram If BPF code contains unused BPF subprogram and there are no other subprogram calls (which can realistically happen in real-world applications given sufficiently smart Clang code optimizations), libbpf will erroneously assume that subprograms are entry-point programs and will attempt to load them with UNSPEC program type. Fix by not relying on subcall instructions and rather detect it based on the structure of BPF object's sections. Fixes: 9a94f27 ("tools: libbpf: restore the ability to load programs from .text section") Reported-by: Dmitrii Banshchikov <dbanschikov@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201107000251.256821-1-andrii@kernel.org
There is a bug when passing zero to PTR_ERR() and return. Fix the smatch error. Fixes: c4d0bfb ("bpf: Add bpf_snprintf_btf helper") Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1604735144-686-1-git-send-email-wangqing@vivo.com
The unsigned variable datasec_id is assigned a return value from the call to check_pseudo_btf_id(), which may return negative error code. This fixes the following coccicheck warning: ./kernel/bpf/verifier.c:9616:5-15: WARNING: Unsigned expression compared with zero: datasec_id > 0 Fixes: eaa6bcb ("bpf: Introduce bpf_per_cpu_ptr()") Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/1605071026-25906-1-git-send-email-kaixuxia@tencent.com
If a device is getting removed or reprobed during resume, use-after-free might happen. For example, h5_btrtl_resume() schedules a work queue for device reprobing, which of course requires removal first. If the removal happens in parallel with the device_resume() and wins the race to acquire device_lock(), removal may remove the device from the PM lists and all, but device_resume() is already running and will continue when the lock can be acquired, thus calling rfkill_resume(). During this, if rfkill_set_block() is then called after the corresponding *_unregister() and kfree() are called, there will be an use-after-free in hci_rfkill_set_block(): BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth] ... Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c dump_stack+0xbc/0x12c print_address_description+0x88/0x4b0 __kasan_report+0x144/0x168 kasan_report+0x10/0x18 check_memory_region+0x19c/0x1ac __kasan_check_write+0x18/0x24 hci_rfkill_set_block+0x58/0xc0 [bluetooth] rfkill_set_block+0x9c/0x120 rfkill_resume+0x34/0x70 dpm_run_callback+0xf0/0x1f4 device_resume+0x210/0x22c Fix this by checking rfkill->registered in rfkill_resume(). device_del() in rfkill_unregister() requires device_lock() and the whole rfkill_resume() is also protected by the same lock via device_resume(), we can make sure either the rfkill->registered is false before rfkill_resume() starts or the rfkill device won't be unregistered before rfkill_resume() returns. As async_resume() holds a reference to the device, at this level there can be no use-after-free; only in the user that doesn't expect this scenario. Fixes: 8589086 ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume") Signed-off-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201110084908.219088-1-tientzu@chromium.org [edit commit message for clarity and add more info provided later] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by: Tobias Waldvogel <tobias.waldvogel@gmail.com> Fixes: 3318111 ("mac80211: reduce duplication in tx status functions") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: stable@vger.kernel.org Fixes: cccf129 ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: stable@vger.kernel.org Fixes: cccf129 ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The xarray is never mutated from an IRQ handler, only from work queues under a spinlock_irq. Thus there is no reason for it be an IRQ type xarray. This was copied over from the original IDR code, but the recent rework put the xarray inside another spinlock_irq which will unbalance the unlocking. Fixes: c206f8b ("RDMA/cm: Make it clearer how concurrency works in cm_req_handler()") Link: https://lore.kernel.org/r/0-v1-808b6da3bd3f+1857-cm_xarray_no_irq_jgg@nvidia.com Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix missing kfree in pvrdma_register_device() when failure from ib_device_set_netdev(). Fixes: 4b38da7 ("RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()") Link: https://lore.kernel.org/r/20201111032202.17925-1-miaoqinglang@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct attribute name is "unused". maybe_unused is a C++17 addition. This patch fixes compilation warning during selftests compilation. Fixes: 197afc6 ("libbpf: Don't attempt to load unused subprog as an entry-point BPF program") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201111231215.1779147-1-andrii@kernel.org
dma_virt_ops requires that all pages have a kernel virtual address. Introduce a INFINIBAND_VIRT_DMA Kconfig symbol that depends on !HIGHMEM and make all three drivers depend on the new symbol. Also remove the ARCH_DMA_ADDR_T_64BIT dependency, which has been obsolete since commit 4965a68 ("arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig") Fixes: 551199a ("lib/dma-virt: Add dma_virt_ops") Link: https://lore.kernel.org/r/20201106181941.1878556-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Andrii has been a de-facto maintainer for libbpf and other components. Update maintainers entry to acknowledge his work de-jure. The folks with git write permissions will continue to follow the rule of not applying their own patches unless absolutely trivial. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201112180340.45265-1-alexei.starovoitov@gmail.com
If a user unbinds and re-binds a NC-SI aware driver the kernel will attempt to register the netlink interface at runtime. The structure is marked __ro_after_init so registration fails spectacularly at this point. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip ftgmac100 1e660000.ethernet: Using NCSI interface 8<--- cut here --- Unable to handle kernel paging request at virtual address 80a8f858 pgd = 8c768dd6 [80a8f858] *pgd=80a0841e(bad) Internal error: Oops: 80d [#1] SMP ARM CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51 Hardware name: Generic DT based system PC is at genl_register_family+0x1f8/0x6d4 LR is at 0xff26ffff pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153 sp : 8553bc80 ip : 81406244 fp : 8553bd04 r10: 8085d12c r9 : 80a8f73c r8 : 85739000 r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858 r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017 Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85524008 DAC: 00000051 Process sh (pid: 116, stack limit = 0x1f1988d6) ... Backtrace: [<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48) r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000 r4:8121c000 [<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210) r5:8121c400 r4:8121c000 [<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778) r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88 r4:85739000 [<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8) r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000 [<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514) r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10 Jakub pointed out that ncsi_register_dev is obviously broken, because there is only one family so it would never work if there was more than one ncsi netdev. Fix the crash by registering the netlink family once on boot, and drop the code to unregister it. Fixes: 955dc68 ("net/ncsi: Add generic netlink family") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ndo_start_xmit() method must return NETDEV_TX_OK if the DMA mapping fails, after freeing the socket buffer. Fix the mtk_star_netdev_start_xmit() function accordingly. Fixes: 8c7bd5a ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20201112084833.21842-1-vincent.stehle@laposte.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 8c7bd5a ("net: ethernet: mtk-star-emac: new driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/1605180879-2573-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The x25_disconnect function in x25_subr.c would decrease the refcount of "x25->neighbour" (struct x25_neigh) and reset this pointer to NULL. However, the x25_rx_call_request function in af_x25.c, which is called when we receive a connection request, does not increase the refcount when it assigns the pointer. Fix this issue by increasing the refcount of "struct x25_neigh" in x25_rx_call_request. This patch fixes frequent kernel crashes when using AF_X25 sockets. Fixes: 4becb7e ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: stable@vger.kernel.org Fixes: dcd479e ("mac80211: always wind down STA state") Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
progfd is created by prog_parse_fd() in do_attach() and before the latter returns in case of success, the file descriptor should be closed. Fixes: 04949cc ("tools: bpftool: add net attach command to attach XDP on interface") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201113115152.53178-1-wanghai38@huawei.com
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4730f4a ("IB/hfi1: Activate the dummy netdev") Link: https://lore.kernel.org/r/1605249747-17942-1-git-send-email-zhangchangzhong@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
…cm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A handful of fixes: * a use-after-free fix in rfkill * a memory leak fix in the mac80211 TX status path * some rate scaling fixes * a fix for the often-reported (by syzbot) sleeping in atomic issue with mac80211's station removal * tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: free sta in sta_info_insert_finish() on errors mac80211: minstrel: fix tx status processing corner case mac80211: minstrel: remove deferred sampling code mac80211: fix memory leak on filtered powersave frames rfkill: Fix use-after-free in rfkill_resume() ==================== Link: https://lore.kernel.org/r/20201113093421.24025-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on the SoC/platform the CPSW can completely lose context after a suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of WR_C0_MISC_EN register, so CPTS IRQ will became disabled. Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is actually started. Fixes: 84ea9c0 ("net: ethernet: ti: cpsw: enable cpts irq") Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20201112111546.20343-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5895631 ("neighbor: Improve garbage collection") guarantees neighbour table entries a five-second lifetime. Processes which make heavy use of multicast can fill the neighour table with multicast addresses in five seconds. At that point, neighbour entries can't be GC-ed because they aren't five seconds old yet, the kernel log starts to fill up with "neighbor table overflow!" messages, and sends start to fail. This patch allows multicast addresses to be thrown out before they've lived out their five seconds. This makes room for non-multicast addresses and makes messages to all addresses more reliable in these circumstances. Fixes: 5895631 ("neighbor: Improve garbage collection") Signed-off-by: Jeff Dike <jdike@akamai.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selecting VSC8575 as a MACSec PHY was not correct The relevant datasheet can be found here: - VSC8575: https://www.microchip.com/wwwproducts/en/VSC8575 History: v1 -> v2: - Corrected the sha in the "Fixes:" tag Fixes: 1bbe0ec ("net: phy: mscc: macsec initialization") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201113091116.1102450-1-steen.hegelund@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4c2703d ("net: marvell: prestera: Add PCI interface support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu> Acked-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20201113113236.71678-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We always have to update the value of ret, otherwise the error value may be the previous one. Fixes: f6bd595 ("net: ethernet: ti: introduce am654 common platform time sync driver") Signed-off-by: Wang Qing <wangqing@vivo.com> [grygorii.strashko@ti.com: fix build warn, subj add fixes tag] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201112164541.3223-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, we may set the tunnel option flag when the size of metadata is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function no matter the geneve option is present or not. As this may result in issues on the tunnel flags consumers, this patch fixes the issue. Related discussion: * https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u Fixes: 256c87c ("net: check tunnel option type in tunnel flags") Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genlmsg_cancel() needs to be called in the error path of inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel the message. Fixes: 6ecf4c3 ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently verifier enforces return code checks for subprograms in the same manner as it does for program entry points. This prevents returning arbitrary scalar values from subprograms. Scalar type of returned values is checked by btf_prepare_func_args() and hence it should be safe to allow only scalars for now. Relax return code checks for subprograms and allow any correct scalar values. Fixes: 51c39bb (bpf: Introduce function-by-function verification) Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201113171756.90594-1-me@ubique.spb.ru
Add the missing clk_disable_unprepare() before return from smsc_phy_probe() in the error handling case. Fixes: bedd8d7 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605180239-1792-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As soon as you add the second port to a VLAN, all other port membership configuration is overwritten with zeroes. The HW interprets this as all ports being "unmodified members" of the VLAN. In the simple case when all ports belong to the same VLAN, switching will still work. But using multiple VLANs or trying to set multiple ports as tagged members will not work. On the 6352, doing a VTU GetNext op, followed by an STU GetNext op will leave you with both the member- and state- data in the VTU/STU data registers. But on the 6097 (which uses the same implementation), the STU GetNext will override the information gathered from the VTU GetNext. Separate the two stages, parsing the result of the VTU GetNext before doing the STU GetNext. We opt to update the existing implementation for all applicable chips, as opposed to creating a separate callback for 6097, because although the previous implementation did work for (at least) 6352, the datasheet does not mention the masking behavior. Fixes: ef6fcea ("net: dsa: mv88e6xxx: get STU entry on VTU GetNext") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20201112114335.27371-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the switch is hardware reset, it reads the contents of the EEPROM. This can contain instructions for programming values into registers and to perform waits between such programming. Reading the EEPROM can take longer than the 100ms mv88e6xxx_hardware_reset() waits after deasserting the reset GPIO. So poll the EEPROM done bit to ensure it is complete. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ruslan Sushko <rus@sushko.dev> Link: https://lore.kernel.org/r/20201116164301.977661-1-rus@sushko.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb(). This ends up to page_frag_alloc() to allocate skb->data from page_frag_cache->va. During the memory pressure, page_frag_cache->va may be allocated as pfmemalloc page. As a result, the skb->pfmemalloc is always true as skb->data is from page_frag_cache->va. The skb will be dropped if the sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour under memory pressure. However, once kernel is not under memory pressure any longer (suppose large amount of memory pages are just reclaimed), the page_frag_alloc() may still re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a result, the skb->pfmemalloc is always true unless page_frag_cache->va is re-allocated, even if the kernel is not under memory pressure any longer. Here is how kernel runs into issue. 1. The kernel is under memory pressure and allocation of PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead, the pfmemalloc page is allocated for page_frag_cache->va. 2: All skb->data from page_frag_cache->va (pfmemalloc) will have skb->pfmemalloc=true. The skb will always be dropped by sock without SOCK_MEMALLOC. This is an expected behaviour. 3. Suppose a large amount of pages are reclaimed and kernel is not under memory pressure any longer. We expect skb->pfmemalloc drop will not happen. 4. Unfortunately, page_frag_alloc() does not proactively re-allocate page_frag_alloc->va and will always re-use the prior pfmemalloc page. The skb->pfmemalloc is always true even kernel is not under memory pressure any longer. Fix this by freeing and re-allocating the page instead of recycling it. References: https://lore.kernel.org/lkml/20201103193239.1807-1-dongli.zhang@oracle.com/ References: https://lore.kernel.org/linux-mm/20201105042140.5253-1-willy@infradead.org/ Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Cc: Bert Barbe <bert.barbe@oracle.com> Cc: Rama Nichanamatlu <rama.nichanamatlu@oracle.com> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Cc: Manjunath Patil <manjunath.b.patil@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: SRINIVAS <srinivas.eeda@oracle.com> Fixes: 79930f5 ("net: do not deplete pfmemalloc reserve") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201115201029.11903-1-dongli.zhang@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case push_scqe() fails to submit the `skb'. The memory of the `skb' is released so only the DMA mapping is leaking. Unmap the DMA mapping in case push_scqe() failed. Fixes: 864a3ff ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms") Cc: Chas Williams <3chas3@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
…ux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2020-11-17 This series introduces some fixes to mlx5 driver. * tag 'mlx5-fixes-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: fix error return code in mlx5e_tc_nic_init() net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabled net/mlx5: Disable QoS when min_rates on all VFs are zero net/mlx5: Clear bw_share upon VF disable net/mlx5: Add handling of port type in rule deletion net/mlx5e: Fix check if netdev is bond slave net/mlx5e: Fix IPsec packet drop by mlx5e_tc_update_skb net/mlx5e: Set IPsec WAs only in IP's non checksum partial case. net/mlx5e: Fix refcount leak on kTLS RX resync ==================== Link: https://lore.kernel.org/r/20201117195702.386113-1-saeedm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Slave function read the following capabilities from the wrong offset: 1. log_mc_entry_sz 2. fs_log_entry_sz 3. log_mc_hash_sz Fix that by adjusting these capabilities offset to match firmware layout. Due to the wrong offset read, the following issues might occur: 1+2. Negative value reported at max_mcast_qp_attach. 3. Driver to init FW with multicast hash size of zero. Fixes: a40ded6 ("net/mlx4_core: Add masking for a few queries on HCA caps") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20201118081922.553-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
…/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-18 Jimmy Assarsson provides two patches for the kvaser_pciefd and kvaser_usb drivers, where the can_bittiming_const are fixed. The next patch is by me and fixes an erroneous flexcan_transceiver_enable() during bus-off recovery in the flexcan driver. Jarkko Nikula's patch for the m_can driver fixes the IRQ handler to only process the interrupts if the device is not suspended. * tag 'linux-can-fixes-for-5.10-20201118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: process interrupt only when not runtime suspended can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits can: kvaser_pciefd: Fix KCAN bittiming limits ==================== Link: https://lore.kernel.org/r/20201118160414.2731659-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are about to add an entry flush. The rfi (exit) flush test measures the number of L1D flushes over a syscall with the RFI flush enabled and disabled. But if the entry flush is also enabled, the effect of enabling and disabling the RFI flush is masked. If there is a debugfs entry for the entry flush, disable it during the RFI flush and restore it later. Reported-by: Spoorthy S <spoorts2@in.ibm.com> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In kup.h we currently include kup-radix.h for all 64-bit builds, which includes Book3S and Book3E. The latter doesn't make sense, Book3E never uses the Radix MMU. This has worked up until now, but almost by accident, and the recent uaccess flush changes introduced a build breakage on Book3E because of the bad structure of the code. So disentangle things so that we only use kup-radix.h for Book3S. This requires some more stubs in kup.h and fixing an include in syscall_64.c. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a test modelled on the RFI flush test which counts the number of L1D misses doing a simple syscall with the entry flush on and off. For simplicity of backporting, this test duplicates a lot of code from rfi_flush. We clean that up in the next patch. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For simplicity in backporting, the original entry_flush test contained a lot of duplicated code from the rfi_flush test. De-duplicate that code. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
…tigations pseries|pnv_setup_rfi_flush already does the count cache flush setup, and we just added entry and uaccess flushes. So the name is not very accurate any more. In both platforms we then also immediately setup the STF flush. Rename them to _setup_security_mitigations and fold the STF flush in. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We remove "other info" from "readelf -s --wide" output when parsing GLOBAL_SYM_COUNT variable, which was added in [1]. But we don't do that for VERSIONED_SYM_COUNT and it's failing the check_abi target on powerpc Fedora 33. The extra "other info" wasn't problem for VERSIONED_SYM_COUNT parsing until commit [2] added awk in the pipe, which assumes that the last column is symbol, but it can be "other info". Adding "other info" removal for VERSIONED_SYM_COUNT the same way as we did for GLOBAL_SYM_COUNT parsing. [1] aa91593 ("libbpf: Fix readelf output parsing for Fedora") [2] 746f534 ("tools/libbpf: Avoid counting local symbols in ABI check") Fixes: 746f534 ("tools/libbpf: Avoid counting local symbols in ABI check") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201118211350.1493421-1-jolsa@kernel.org
IPV6=m NF_DEFRAG_IPV6=y ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function `nf_ct_frag6_gather': net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to `ipv6_frag_thdr_truncated' Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This dependency is forcing IPV6=y. Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This is the same solution as used with a similar issues: Referring to commit 70b095c ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6 module") Fixes: 9d9e937 ("ipv6/netfilter: Discard first fragment not including all headers") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Georg Kohmann <geokohma@cisco.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the multi-subnet support of SMC-Dv2 the match for existing link groups should not include the vlanid of the network device. Set ini->smcd_version accordingly before the call to smc_conn_create() and use this value in smc_conn_create() to skip the vlanid check. Fixes: 5c21c4c ("net/smc: determine accepted ISM devices") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
…id() Sparse complaints 3 times about: net/smc/smc_ib.c:203:52: warning: incorrect type in argument 1 (different address spaces) net/smc/smc_ib.c:203:52: expected struct net_device const *dev net/smc/smc_ib.c:203:52: got struct net_device [noderef] __rcu *const ndev Fix that by using the existing and validated ndev variable instead of accessing attr->ndev directly. Fixes: 5102eca ("net/smc: Use rdma_read_gid_l2_fields to L2 fields") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karsten Graul says: ==================== net/smc: fixes 2020-11-18 Patch 1 fixes the matching of link groups because with SMC-Dv2 the vlanid should no longer be part of this matching. Patch 2 removes a sparse message. ==================== Link: https://lore.kernel.org/r/20201118214038.24039-1-kgraul@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
…ux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes for CVE-2020-4788. From Daniel's cover letter: IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch series flushes the L1 cache on kernel entry (patch 2) and after the kernel performs any user accesses (patch 3). It also adds a self-test and performs some related cleanups" * tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations selftests/powerpc: refactor entry and rfi_flush tests selftests/powerpc: entry flush test powerpc: Only include kup-radix.h for 64-bit Book3S powerpc/64s: flush L1D after user accesses powerpc/64s: flush L1D on kernel entry selftests/powerpc: rfi_flush: disable entry flush if present
do_strncpy_from_user() may copy some extra bytes after the NUL terminator into the destination buffer. This usually does not matter for normal string operations. However, when BPF programs key BPF maps with strings, this matters a lot. A BPF program may read strings from user memory by calling the bpf_probe_read_user_str() helper which eventually calls do_strncpy_from_user(). The program can then key a map with the destination buffer. BPF map keys are fixed-width and string-agnostic, meaning that map keys are treated as a set of bytes. The issue is when do_strncpy_from_user() overcopies bytes after the NUL terminator, it can result in seemingly identical strings occupying multiple slots in a BPF map. This behavior is subtle and totally unexpected by the user. This commit masks out the bytes following the NUL while preserving long-sized stride in the fast path. Fixes: 6ae08ae ("bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/21efc982b3e9f2f7b0379eed642294caaa0c27a7.1605642949.git.dxu@dxuuu.xyz
…ter NUL Previously, bpf_probe_read_user_str() could potentially overcopy the trailing bytes after the NUL due to how do_strncpy_from_user() does the copy in long-sized strides. The issue has been fixed in the previous commit. This commit adds a selftest that ensures we don't regress bpf_probe_read_user_str() again. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/4d977508fab4ec5b7b574b85bdf8b398868b6ee9.1605642949.git.dxu@dxuuu.xyz
Daniel Xu says: ==================== 6ae08ae ("bpf: Add probe_read_{user, kernel} and probe_read_{user, kernel}_str helpers") introduced a subtle bug where bpf_probe_read_user_str() would potentially copy a few extra bytes after the NUL terminator. This issue is particularly nefarious when strings are used as map keys, as seemingly identical strings can occupy multiple entries in a map. This patchset fixes the issue and introduces a selftest to prevent future regressions. v6 -> v7: * Add comments v5 -> v6: * zero-pad up to sizeof(unsigned long) after NUL v4 -> v5: * don't read potentially uninitialized memory v3 -> v4: * directly pass userspace pointer to prog * test more strings of different length v2 -> v3: * set pid filter before attaching prog in selftest * use long instead of int as bpf_probe_read_user_str() retval * style changes v1 -> v2: * add Fixes: tag * add selftest ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a mutex_unlock() issue where before copy_from_user() is not called mutex_locked. Fixes: 4b1a29a ("error-injection: Support fault injection framework") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/bpf/160570737118.263807.8358435412898356284.stgit@devnote2
Alexei Starovoitov says: ==================== 1) libbpf should not attempt to load unused subprogs, from Andrii. 2) Make strncpy_from_user() mask out bytes after NUL terminator, from Daniel. 3) Relax return code check for subprograms in the BPF verifier, from Dmitrii. 4) Fix several sockmap issues, from John. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: fail_function: Remove a redundant mutex unlock selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL lib/strncpy_from_user.c: Mask out bytes after NUL terminator. libbpf: Fix VERSIONED_SYM_COUNT number parsing bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list bpf, sockmap: Handle memory acct if skb_verdict prog redirects to self bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self bpf, sockmap: Use truesize with sk_rmem_schedule() bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirect bpf, sockmap: Fix partial copy_page_to_iter so progress can still be made selftests/bpf: Fix error return code in run_getsockopt_test() bpf: Relax return code check for subprograms tools, bpftool: Add missing close before bpftool net attach exit MAINTAINERS/bpf: Update Andrii's entry. selftests/bpf: Fix unused attribute usage in subprogs_unused test bpf: Fix unsigned 'datasec_id' compared with zero in check_pseudo_btf_id bpf: Fix passing zero to PTR_ERR() in bpf_btf_printf_prepare libbpf: Don't attempt to load unused subprog as an entry-point BPF program ==================== Link: https://lore.kernel.org/r/20201119200721.288-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
…t/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The last two weeks have been quiet here, just the usual smattering of
long standing bug fixes.
A collection of error case bug fixes:
- Improper nesting of spinlock types in cm
- Missing error codes and kfree()
- Ensure dma_virt_ops users have the right kconfig symbols to work
properly
- Compilation failure of tools/testing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
tools/testing/scatterlist: Fix test to compile and run
IB/hfi1: Fix error return code in hfi1_init_dd()
RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configs
RDMA/pvrdma: Fix missing kfree() in pvrdma_register_device()
RDMA/cm: Make the local_id_table xarray non-irq
…/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc5, including fixes from the WiFi
(mac80211), can and bpf (including the strncpy_from_user fix).
Current release - regressions:
- mac80211: fix memory leak of filtered powersave frames
- mac80211: free sta in sta_info_insert_finish() on errors to avoid
sleeping in atomic context
- netlabel: fix an uninitialized variable warning added in -rc4
Previous release - regressions:
- vsock: forward all packets to the host when no H2G is registered,
un-breaking AWS Nitro Enclaves
- net: Exempt multicast addresses from five-second neighbor lifetime
requirement, decreasing the chances neighbor tables fill up
- net/tls: fix corrupted data in recvmsg
- qed: fix ILT configuration of SRC block
- can: m_can: process interrupt only when not runtime suspended
Previous release - always broken:
- page_frag: Recover from memory pressure by not recycling pages
allocating from the reserves
- strncpy_from_user: Mask out bytes after NUL terminator
- ip_tunnels: Set tunnel option flag only when tunnel metadata is
present, always setting it confuses Open vSwitch
- bpf, sockmap:
- Fix partial copy_page_to_iter so progress can still be made
- Fix socket memory accounting and obeying SO_RCVBUF
- net: Have netpoll bring-up DSA management interface
- net: bridge: add missing counters to ndo_get_stats64 callback
- tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt
- enetc: Workaround MDIO register access HW bug
- net/ncsi: move netlink family registration to a subsystem init,
instead of tying it to driver probe
- net: ftgmac100: unregister NC-SI when removing driver to avoid
crash
- lan743x:
- prevent interrupt storm on open
- fix freeing skbs in the wrong context
- net/mlx5e: Fix socket refcount leak on kTLS RX resync
- net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097
- fix 21 unset return codes and other mistakes on error paths, mostly
detected by the Hulk Robot"
* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
fail_function: Remove a redundant mutex unlock
selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
net/smc: fix matching of existing link groups
ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
libbpf: Fix VERSIONED_SYM_COUNT number parsing
net/mlx4_core: Fix init_hca fields offset
atm: nicstar: Unmap DMA on send error
page_frag: Recover from memory pressure
net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
mlxsw: core: Use variable timeout for EMAD retries
mlxsw: Fix firmware flashing
net: Have netpoll bring-up DSA management interface
atl1e: fix error return code in atl1e_probe()
atl1c: fix error return code in atl1c_probe()
ah6: fix error return code in ah6_input()
net: usb: qmi_wwan: Set DTR quirk for MR400
can: m_can: process interrupt only when not runtime suspended
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
...
pull bot
pushed a commit
that referenced
this pull request
Mar 29, 2024
In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: #312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: #314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: #315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: #316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: #318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: #319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <asavkov@redhat.com> Tested-by: Puranjay Mohan <puranjay12@gmail.com> Acked-by: Puranjay Mohan <puranjay12@gmail.com> Acked-by: Xu Kuohai <xukuohai@huawei.com> Message-ID: <20240321081809.158803-1-asavkov@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
May 17, 2024
Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: #344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: #345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: #346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: #490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )