[enocean] Improved device discovery and added SMACK capability (open…

…hab#10157)

 * Added SMACK teach in
 * Teached in devices can be teach out on a repeated teach in
 * Improved detection of RPS devices, device types can be better distinguished now
 * Bugfixes for discovery fallback to GenericThings
 * Responses to message requests are send automatically now, no need for linking SEND_COMMAND channel

Fixes openhab#10156

Signed-off-by: Daniel Weber <uni@fruggy.de>

bundles/org.openhab.binding.enocean/README.md

@@ -126,7 +126,21 @@ The corresponding channels are created dynamically, too.
 If the actuator supports UTE teach-in, the corresponding thing can be created and paired automatically.
 First you have to **start the discovery scan for a gateway**.
 Then press the teach-in button of the actuator.
-If the EEP of the actuator is known, the binding sends an UTE teach-in response with a new SenderId and creates a new thing with its channels. 
+If the EEP of the actuator is known, the binding sends an UTE teach-in response with a new SenderId and creates a new thing with its channels.
+
+This binding supports so called smart acknowlegde (SMACK) devices too.
+Before you can pair a SMACK device you have to configure your gateway bridge as a SMACK postmaster.
+If this option is enabled you can pair up to 20 SMACK devices with your gateway.
+
+Communication between your gateway and a SMACK device is handled through mailboxes.
+A mailbox is created for each paired SMACK device and deleted after teach out.
+You can see the paired SMACK devices and their mailbox index in the gateway properties.
+SMACK devices send periodically status updates followed by a response request.
+Whenever such a request is received a `requestAnswer` event is triggered for channel `statusRequestEvent`.
+Afterwards you have 100ms time to recalculate your items states and update them.
+A message with the updated item states is built, put into the corresponding mailbox and automatically sent upon request of the device.
+Pairing and unpairing can be done through a discovery scan.
+The corresponding thing of an unpaired device gets disabled, you have to delete it manually if you want to.
 
 If the actuator does not support UTE teach-ins, you have to create, configure and choose the right EEP of the thing manually.
 It is important to link the teach-in channel of this thing to a switch item.
@@ -158,6 +172,8 @@ If you change the SenderId of your thing, you have to pair again the thing with
 |                                 | espVersion        | ESP Version of gateway | ESP3, ESP2 |
 |                                 | rs485             | If gateway is directly connected to a RS485 bus the BaseId is set to 0x00 | true, false
 |                                 | rs485BaseId       | Override BaseId 0x00 if your bus contains a telegram duplicator (FTD14 for ex) | 4 byte hex value |
+|                                 | enableSmack       | Enables SMACK pairing and handling of SMACK messages | true, false |
+|                                 | sendTeachOuts     | Defines if a repeated teach in request should be answered with a learned in or teach out response | true, false |
 | pushButton                      | receivingEEPId    | EEP used for receiving msg  | F6_01_01, D2_03_0A |
 |                                 | enoceanId         | EnOceanId of device this thing belongs to | hex value as string |
 | rockerSwitch                    | receivingEEPId    |                             | F6_02_01, F6_02_02 |
@@ -300,6 +316,7 @@ The channels of a thing are determined automatically based on the chosen EEP.
 | rssi                 | Number                   | Received Signal Strength Indication (dBm) of last received message |
 | repeatCount          | Number                   | Number of repeaters involved in the transmission of the telegram |
 | lastReceived         | DateTime                 | Date and time the last telegram was received |
+| statusRequestEvent   | Trigger                  | Emits event 'requestAnswer' | 
 
 Items linked to bi-directional actuators (actuator sends status messages back) should always disable the `autoupdate`.
 This is especially true for Eltako rollershutter, as their position is calculated out of the current position and the moving time.

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/EnOceanBindingConstants.java

@@ -177,7 +177,7 @@ public class EnOceanBindingConstants {
     public static final String CHANNEL_WAKEUPCYCLE = "wakeUpCycle";
     public static final String CHANNEL_SERVICECOMMAND = "serviceCommand";
     public static final String CHANNEL_STATUS_REQUEST_EVENT = "statusRequestEvent";
-    public static final String CHANNEL_SEND_COMMAND = "sendCommand";
+    public static final String VIRTUALCHANNEL_SEND_COMMAND = "sendCommand";
 
     public static final String CHANNEL_VENTILATIONOPERATIONMODE = "ventilationOperationMode";
     public static final String CHANNEL_FIREPLACESAFETYMODE = "fireplaceSafetyMode";
@@ -293,7 +293,8 @@ public class EnOceanBindingConstants {
             Map.entry(CHANNEL_INDOORAIRANALYSIS,
                     new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_INDOORAIRANALYSIS),
                             CoreItemFactory.STRING)),
-            Map.entry(CHANNEL_SETPOINT,
+            Map.entry(
+                    CHANNEL_SETPOINT,
                     new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_SETPOINT),
                             CoreItemFactory.NUMBER)),
             Map.entry(CHANNEL_CONTACT,
@@ -444,13 +445,6 @@ public class EnOceanBindingConstants {
                     new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_SERVICECOMMAND),
                             CoreItemFactory.NUMBER)),
 
-            Map.entry(CHANNEL_STATUS_REQUEST_EVENT,
-                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_STATUS_REQUEST_EVENT), null,
-                            "", false, true)),
-            Map.entry(CHANNEL_SEND_COMMAND,
-                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_SEND_COMMAND),
-                            CoreItemFactory.SWITCH)),
-
             Map.entry(CHANNEL_VENTILATIONOPERATIONMODE,
                     new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_VENTILATIONOPERATIONMODE),
                             CoreItemFactory.STRING)),
@@ -527,6 +521,10 @@ public class EnOceanBindingConstants {
                             CoreItemFactory.NUMBER + ItemUtil.EXTENSION_SEPARATOR
                                     + Dimensionless.class.getSimpleName())),
 
+            Map.entry(CHANNEL_STATUS_REQUEST_EVENT,
+                    new EnOceanChannelDescription(new ChannelTypeUID(BINDING_ID, CHANNEL_STATUS_REQUEST_EVENT), null,
+                            "", false, true)),
+
             Map.entry(CHANNEL_REPEATERMODE, new EnOceanChannelDescription(
                     new ChannelTypeUID(BINDING_ID, CHANNEL_REPEATERMODE), CoreItemFactory.STRING)));
 
@@ -536,11 +534,8 @@ public class EnOceanBindingConstants {
     public static final String REPEATERMODE_LEVEL_2 = "LEVEL2";
 
     // Bridge config properties
-    public static final String SENDERID = "senderId";
     public static final String PATH = "path";
-    public static final String HOST = "host";
-    public static final String RS485 = "rs485";
-    public static final String NEXTSENDERID = "nextSenderId";
+    public static final String PARAMETER_NEXT_SENDERID = "nextSenderId";
 
     // Bridge properties
     public static final String PROPERTY_BASE_ID = "Base ID";
@@ -551,13 +546,12 @@ public class EnOceanBindingConstants {
     public static final String PROPERTY_DESCRIPTION = "Description";
 
     // Thing properties
-    public static final String PROPERTY_ENOCEAN_ID = "enoceanId";
+    public static final String PROPERTY_SENDINGENOCEAN_ID = "SendingEnoceanId";
 
     // Thing config parameter
     public static final String PARAMETER_SENDERIDOFFSET = "senderIdOffset";
     public static final String PARAMETER_SENDINGEEPID = "sendingEEPId";
     public static final String PARAMETER_RECEIVINGEEPID = "receivingEEPId";
-    public static final String PARAMETER_EEPID = "eepId";
 
     public static final String PARAMETER_BROADCASTMESSAGES = "broadcastMessages";
     public static final String PARAMETER_ENOCEANID = "enoceanId";

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/EnOceanHandlerFactory.java

@@ -28,6 +28,7 @@
 import org.openhab.core.io.transport.serial.SerialPortManager;
 import org.openhab.core.thing.Bridge;
 import org.openhab.core.thing.Thing;
+import org.openhab.core.thing.ThingManager;
 import org.openhab.core.thing.ThingTypeUID;
 import org.openhab.core.thing.ThingUID;
 import org.openhab.core.thing.binding.BaseThingHandlerFactory;
@@ -60,6 +61,9 @@ public class EnOceanHandlerFactory extends BaseThingHandlerFactory {
     @Reference
     ItemChannelLinkRegistry itemChannelLinkRegistry;
 
+    @Reference
+    ThingManager thingManager;
+
     @Override
     public boolean supportsThingType(ThingTypeUID thingTypeUID) {
         return SUPPORTED_THING_TYPES_UIDS.contains(thingTypeUID);
@@ -96,7 +100,7 @@ protected void removeHandler(ThingHandler thingHandler) {
     }
 
     private void registerDeviceDiscoveryService(EnOceanBridgeHandler handler) {
-        EnOceanDeviceDiscoveryService discoveryService = new EnOceanDeviceDiscoveryService(handler);
+        EnOceanDeviceDiscoveryService discoveryService = new EnOceanDeviceDiscoveryService(handler, thingManager);
         discoveryService.activate();
         this.discoveryServiceRegs.put(handler.getThing().getUID(),
                 bundleContext.registerService(DiscoveryService.class.getName(), discoveryService, new Hashtable<>()));

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/config/EnOceanActuatorConfig.java

@@ -19,7 +19,7 @@
 public class EnOceanActuatorConfig extends EnOceanBaseConfig {
 
     public int channel;
-    public int senderIdOffset = -1;
+    public Integer senderIdOffset = null;
     public String manufacturerId;
     public String teachInType;
 

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/config/EnOceanBaseConfig.java

@@ -17,15 +17,23 @@
 import java.util.ArrayList;
 import java.util.List;
 
+import org.eclipse.jdt.annotation.NonNullByDefault;
 import org.openhab.core.util.HexUtils;
 
 /**
  *
  * @author Daniel Weber - Initial contribution
  */
+@NonNullByDefault
 public class EnOceanBaseConfig {
+    /**
+     * EnOceanId of the physical device
+     */
     public String enoceanId;
 
+    /**
+     * EEP used/send by physical device
+     */
     public List<String> receivingEEPId = new ArrayList<>();
     public boolean receivingSIGEEP = false;
 

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/config/EnOceanBridgeConfig.java

@@ -46,10 +46,16 @@ public static ESPVersion getESPVersion(String espVersion) {
     public boolean rs485;
     public String rs485BaseId;
 
-    public int nextSenderId = 0;
+    public Integer nextSenderId;
+
+    public boolean enableSmack;
+    public boolean sendTeachOuts;
 
     public EnOceanBridgeConfig() {
         espVersion = "ESP3";
+        sendTeachOuts = false;
+        enableSmack = true;
+        nextSenderId = null;
     }
 
     public ESPVersion getESPVersion() {

bundles/org.openhab.binding.enocean/src/main/java/org/openhab/binding/enocean/internal/config/EnOceanChannelTransformationConfig.java

@@ -12,12 +12,19 @@
  */
 package org.openhab.binding.enocean.internal.config;
 
+import org.openhab.core.config.core.Configuration;
+
 /**
  *
  * @author Daniel Weber - Initial contribution
  */
-public class EnOceanChannelTransformationConfig {
+public class EnOceanChannelTransformationConfig extends Configuration {
 
     public String transformationType;
     public String transformationFunction;
+
+    public EnOceanChannelTransformationConfig() {
+        put("transformationType", "");
+        put("transformationFunction", "");
+    }
 }