[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu... #2

sjoerd-ccu · 2014-04-07T09:06:14Z

...eue

Backport of linux f0c24fd. The timestamp_type
field was introduce in later kernels, so not set in this backport.

original ommit message:
Add copying of buffer timestamps and set the timestamp_type to
V4L2_BUF_FLAG_TIMESTAMP_COPY to avoid warnings about UNDEFINED
timestamp type like:
WARNING: at drivers/media/v4l2-core/videobuf2-core.c:2042 vb2_queue_init+0xe0/0x18c()
Modules linked in:
from
from
from
from
from
from
from
from
from
from
from
from
from
from

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

… queue Backport of linux f0c24fd. The timestamp_type field was introduce in later kernels, so not set in this backport. original ommit message: Add copying of buffer timestamps and set the timestamp_type to V4L2_BUF_FLAG_TIMESTAMP_COPY to avoid warnings about UNDEFINED timestamp type like: WARNING: at drivers/media/v4l2-core/videobuf2-core.c:2042 vb2_queue_init+0xe0/0x18c() Modules linked in: [<c0016ef0>] (unwind_backtrace+0x0/0x13c) from [<c0029b3c>] (warn_slowpath_common+0x54/0x64) [<c0029b3c>] (warn_slowpath_common+0x54/0x64) from [<c0029b68>] (warn_slowpath_null+0x1c/0x24) [<c0029b68>] (warn_slowpath_null+0x1c/0x24) from [<c03b7018>] (vb2_queue_init+0xe0/0x18c) [<c03b7018>] (vb2_queue_init+0xe0/0x18c) from [<c03b4e08>] (v4l2_m2m_ctx_init+0xa0/0xc4) [<c03b4e08>] (v4l2_m2m_ctx_init+0xa0/0xc4) from [<c03ca6c4>] (fimc_m2m_open+0x130/0x1f8) [<c03ca6c4>] (fimc_m2m_open+0x130/0x1f8) from [<c03a5dd4>] (v4l2_open+0xac/0xe8) [<c03a5dd4>] (v4l2_open+0xac/0xe8) from [<c0113920>] (chrdev_open+0x9c/0x158) [<c0113920>] (chrdev_open+0x9c/0x158) from [<c010e488>] (do_dentry_open+0x1f8/0x280) [<c010e488>] (do_dentry_open+0x1f8/0x280) from [<c010e600>] (finish_open+0x34/0x50) [<c010e600>] (finish_open+0x34/0x50) from [<c011cc58>] (do_last+0x5bc/0xc00) [<c011cc58>] (do_last+0x5bc/0xc00) from [<c011d34c>] (path_openat+0xb0/0x484) [<c011d34c>] (path_openat+0xb0/0x484) from [<c011d824>] (do_filp_open+0x30/0x84) [<c011d824>] (do_filp_open+0x30/0x84) from [<c010e0f8>] (do_sys_open+0xe8/0x170) [<c010e0f8>] (do_sys_open+0xe8/0x170) from [<c000f040>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu...

Avoid circular mutex lock by pushing the dev->lock to the .fini callback on each extension. As em28xx-dvb, em28xx-alsa and em28xx-rc have their own data structures, and don't touch at the common structure during .fini, only em28xx-v4l needs to be locked. [ 90.994317] ====================================================== [ 90.994356] [ INFO: possible circular locking dependency detected ] [ 90.994395] 3.13.0-rc1+ hardkernel#24 Not tainted [ 90.994427] ------------------------------------------------------- [ 90.994458] khubd/54 is trying to acquire lock: [ 90.994490] (&card->controls_rwsem){++++.+}, at: [<ffffffffa0177b08>] snd_ctl_dev_free+0x28/0x60 [snd] [ 90.994656] [ 90.994656] but task is already holding lock: [ 90.994688] (&dev->lock){+.+.+.}, at: [<ffffffffa040db81>] em28xx_close_extension+0x31/0x90 [em28xx] [ 90.994843] [ 90.994843] which lock already depends on the new lock. [ 90.994843] [ 90.994874] [ 90.994874] the existing dependency chain (in reverse order) is: [ 90.994905] -> #1 (&dev->lock){+.+.+.}: [ 90.995057] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 [ 90.995121] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 [ 90.995182] [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0 [ 90.995245] [<ffffffffa0422cca>] em28xx_vol_put_mute+0x1ba/0x1d0 [em28xx_alsa] [ 90.995309] [<ffffffffa017813d>] snd_ctl_elem_write+0xfd/0x140 [snd] [ 90.995376] [<ffffffffa01791c2>] snd_ctl_ioctl+0xe2/0x810 [snd] [ 90.995442] [<ffffffff811db8b0>] do_vfs_ioctl+0x300/0x520 [ 90.995504] [<ffffffff811dbb51>] SyS_ioctl+0x81/0xa0 [ 90.995568] [<ffffffff816b1929>] system_call_fastpath+0x16/0x1b [ 90.995630] -> #0 (&card->controls_rwsem){++++.+}: [ 90.995780] [<ffffffff810b7a47>] check_prevs_add+0x947/0x950 [ 90.995841] [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330 [ 90.995901] [<ffffffff810b9f82>] lock_acquire+0xa2/0x120 [ 90.995962] [<ffffffff816a762b>] down_write+0x3b/0xa0 [ 90.996022] [<ffffffffa0177b08>] snd_ctl_dev_free+0x28/0x60 [snd] [ 90.996088] [<ffffffffa017a255>] snd_device_free+0x65/0x140 [snd] [ 90.996154] [<ffffffffa017a751>] snd_device_free_all+0x61/0xa0 [snd] [ 90.996219] [<ffffffffa0173af4>] snd_card_do_free+0x14/0x130 [snd] [ 90.996283] [<ffffffffa0173f14>] snd_card_free+0x84/0x90 [snd] [ 90.996349] [<ffffffffa0423397>] em28xx_audio_fini+0x97/0xb0 [em28xx_alsa] [ 90.996411] [<ffffffffa040dba6>] em28xx_close_extension+0x56/0x90 [em28xx] [ 90.996475] [<ffffffffa040f639>] em28xx_usb_disconnect+0x79/0x90 [em28xx] [ 90.996539] [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0 [ 90.996620] [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0 [ 90.996682] [<ffffffff814292a5>] device_release_driver+0x25/0x40 [ 90.996742] [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0 [ 90.996801] [<ffffffff81425536>] device_del+0x136/0x1d0 [ 90.996863] [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290 [ 90.996923] [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0 [ 90.996984] [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0 [ 90.997044] [<ffffffff814967c3>] hub_events+0x313/0x9b0 [ 90.997105] [<ffffffff81496e95>] hub_thread+0x35/0x170 [ 90.997165] [<ffffffff8108ea2f>] kthread+0xff/0x120 [ 90.997226] [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0 [ 90.997287] [ 90.997287] other info that might help us debug this: [ 90.997287] [ 90.997318] Possible unsafe locking scenario: [ 90.997318] [ 90.997348] CPU0 CPU1 [ 90.997378] ---- ---- [ 90.997408] lock(&dev->lock); [ 90.997497] lock(&card->controls_rwsem); [ 90.997607] lock(&dev->lock); [ 90.997697] lock(&card->controls_rwsem); [ 90.997786] [ 90.997786] *** DEADLOCK *** [ 90.997786] [ 90.997817] 5 locks held by khubd/54: [ 90.997847] #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0 [ 90.998025] #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0 [ 90.998204] #2: (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40 [ 90.998383] #3: (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa040db77>] em28xx_close_extension+0x27/0x90 [em28xx] [ 90.998567] hardkernel#4: (&dev->lock){+.+.+.}, at: [<ffffffffa040db81>] em28xx_close_extension+0x31/0x90 [em28xx] Reviewed-by: Frank Schäfer <fschaefer.oss@googlemail.com> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

When the PR host is running on a POWER8 machine in POWER8 mode, it will use doorbell interrupts for IPIs. If one of them arrives while we are in the guest, we pop out of the guest with trap number 0xA00, which isn't handled by kvmppc_handle_exit_pr, leading to the following BUG_ON: [ 331.436215] exit_nr=0xa00 | pc=0x1d2c | msr=0x800000000000d032 [ 331.437522] ------------[ cut here ]------------ [ 331.438296] kernel BUG at arch/powerpc/kvm/book3s_pr.c:982! [ 331.439063] Oops: Exception in kernel mode, sig: 5 [#2] [ 331.439819] SMP NR_CPUS=1024 NUMA pSeries [ 331.440552] Modules linked in: tun nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw virtio_net kvm binfmt_misc ibmvscsi scsi_transport_srp scsi_tgt virtio_blk [ 331.447614] CPU: 11 PID: 1296 Comm: qemu-system-ppc Tainted: G D 3.11.7-200.2.fc19.ppc64p7 #1 [ 331.448920] task: c0000003bdc8c000 ti: c0000003bd32c000 task.ti: c0000003bd32c000 [ 331.450088] NIP: d0000000025d6b9c LR: d0000000025d6b98 CTR: c0000000004cfdd0 [ 331.451042] REGS: c0000003bd32f420 TRAP: 0700 Tainted: G D (3.11.7-200.2.fc19.ppc64p7) [ 331.452331] MSR: 800000000282b032 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI> CR: 28004824 XER: 20000000 [ 331.454616] SOFTE: 1 [ 331.455106] CFAR: c000000000848bb8 [ 331.455726] GPR00: d0000000025d6b98 c0000003bd32f6a0 d0000000026017b8 0000000000000032 GPR04: c0000000018627f8 c000000001873208 320d0a3030303030 3030303030643033 GPR08: c000000000c490a8 0000000000000000 0000000000000000 0000000000000002 GPR12: 0000000028004822 c00000000fdc6300 0000000000000000 00000100076ec310 GPR16: 000000002ae343b8 00003ffffd397398 0000000000000000 0000000000000000 GPR20: 00000100076f16f4 00000100076ebe60 0000000000000008 ffffffffffffffff GPR24: 0000000000000000 0000008001041e60 0000000000000000 0000008001040ce8 GPR28: c0000003a2d80000 0000000000000a00 0000000000000001 c0000003a2681810 [ 331.466504] NIP [d0000000025d6b9c] .kvmppc_handle_exit_pr+0x75c/0xa80 [kvm] [ 331.466999] LR [d0000000025d6b98] .kvmppc_handle_exit_pr+0x758/0xa80 [kvm] [ 331.467517] Call Trace: [ 331.467909] [c0000003bd32f6a0] [d0000000025d6b98] .kvmppc_handle_exit_pr+0x758/0xa80 [kvm] (unreliable) [ 331.468553] [c0000003bd32f750] [d0000000025d98f0] kvm_start_lightweight+0xb4/0xc4 [kvm] [ 331.469189] [c0000003bd32f920] [d0000000025d7648] .kvmppc_vcpu_run_pr+0xd8/0x270 [kvm] [ 331.469838] [c0000003bd32f9c0] [d0000000025cf748] .kvmppc_vcpu_run+0xc8/0xf0 [kvm] [ 331.470790] [c0000003bd32fa50] [d0000000025cc19c] .kvm_arch_vcpu_ioctl_run+0x5c/0x1b0 [kvm] [ 331.471401] [c0000003bd32fae0] [d0000000025c4888] .kvm_vcpu_ioctl+0x478/0x730 [kvm] [ 331.472026] [c0000003bd32fc90] [c00000000026192c] .do_vfs_ioctl+0x4dc/0x7a0 [ 331.472561] [c0000003bd32fd80] [c000000000261cc4] .SyS_ioctl+0xd4/0xf0 [ 331.473095] [c0000003bd32fe30] [c000000000009ed8] syscall_exit+0x0/0x98 [ 331.473633] Instruction dump: [ 331.473766] 4bfff9b4 2b9d0800 419efc18 60000000 60420000 3d220000 e8bf11a0 e8df12a8 [ 331.474733] 7fa4eb78 e8698660 48015165 e8410028 <0fe00000> 813f00e4 3ba00000 39290001 [ 331.475386] ---[ end trace 49fc47d994c1f8f2 ]--- [ 331.479817] This fixes the problem by making kvmppc_handle_exit_pr() recognize the interrupt. We also need to jump to the doorbell interrupt handler in book3s_segment.S to handle the interrupt on the way out of the guest. Having done that, there's nothing further to be done in kvmppc_handle_exit_pr(). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>

…t/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix make -s detection with make-4.0 - fix for scripts/setlocalversion when the kernel repository is a submodule - do not hardcode ';' in macros that expand to assembler code, as some architectures' assemblers use a different character for newline - Fix passing --gdwarf-2 to the assembler * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: frv: Remove redundant debugging info flag mn10300: Remove redundant debugging info flag kbuild: Fix debugging info generation for .S files arch: use ASM_NL instead of ';' for assembler new line character in the macro kbuild: Fix silent builds with make-4 Fix detectition of kernel git repository in setlocalversion script [take #2]

… into fixes mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>

sdata->u.ap.request_smps_work can’t be flushed synchronously under wdev_lock(wdev) since ieee80211_request_smps_ap_work itself locks the same lock. While at it, reset the driver_smps_mode when the ap is stopped to its default: OFF. This solves: ====================================================== [ INFO: possible circular locking dependency detected ] 3.12.0-ipeer+ #2 Tainted: G O ------------------------------------------------------- rmmod/2867 is trying to acquire lock: ((&sdata->u.ap.request_smps_work)){+.+...}, at: [<c105b8d0>] flush_work+0x0/0x90 but task is already holding lock: (&wdev->mtx){+.+.+.}, at: [<f9b32626>] cfg80211_stop_ap+0x26/0x230 [cfg80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wdev->mtx){+.+.+.}: [<c10aefa9>] lock_acquire+0x79/0xe0 [<c1607a1a>] mutex_lock_nested+0x4a/0x360 [<fb06288b>] ieee80211_request_smps_ap_work+0x2b/0x50 [mac80211] [<c105cdd8>] process_one_work+0x198/0x450 [<c105d469>] worker_thread+0xf9/0x320 [<c10669ff>] kthread+0x9f/0xb0 [<c1613397>] ret_from_kernel_thread+0x1b/0x28 -> #0 ((&sdata->u.ap.request_smps_work)){+.+...}: [<c10ae9df>] __lock_acquire+0x183f/0x1910 [<c10aefa9>] lock_acquire+0x79/0xe0 [<c105b917>] flush_work+0x47/0x90 [<c105d867>] __cancel_work_timer+0x67/0xe0 [<c105d90f>] cancel_work_sync+0xf/0x20 [<fb0765cc>] ieee80211_stop_ap+0x8c/0x340 [mac80211] [<f9b3268c>] cfg80211_stop_ap+0x8c/0x230 [cfg80211] [<f9b0d8f9>] cfg80211_leave+0x79/0x100 [cfg80211] [<f9b0da72>] cfg80211_netdev_notifier_call+0xf2/0x4f0 [cfg80211] [<c160f2c9>] notifier_call_chain+0x59/0x130 [<c106c6de>] __raw_notifier_call_chain+0x1e/0x30 [<c106c70f>] raw_notifier_call_chain+0x1f/0x30 [<c14f8213>] call_netdevice_notifiers_info+0x33/0x70 [<c14f8263>] call_netdevice_notifiers+0x13/0x20 [<c14f82a4>] __dev_close_many+0x34/0xb0 [<c14f83fe>] dev_close_many+0x6e/0xc0 [<c14f9c77>] rollback_registered_many+0xa7/0x1f0 [<c14f9dd4>] unregister_netdevice_many+0x14/0x60 [<fb06f4d9>] ieee80211_remove_interfaces+0xe9/0x170 [mac80211] [<fb055116>] ieee80211_unregister_hw+0x56/0x110 [mac80211] [<fa3e9396>] iwl_op_mode_mvm_stop+0x26/0xe0 [iwlmvm] [<f9b9d8ca>] _iwl_op_mode_stop+0x3a/0x70 [iwlwifi] [<f9b9d96f>] iwl_opmode_deregister+0x6f/0x90 [iwlwifi] [<fa405179>] __exit_compat+0xd/0x19 [iwlmvm] [<c10b8bf9>] SyS_delete_module+0x179/0x2b0 [<c1613421>] sysenter_do_call+0x12/0x32 Fixes: 687da13 ("mac80211: implement SMPS for AP") Cc: <stable@vger.kernel.org> [3.13] Reported-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>

sparc_cpu_model isn't in asm/system.h any more, so remove a comment about it. Signed-off-by: David Howells <dhowells@redhat.com> cc: "David S. Miller" <davem@davemloft.net> cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sparc fixes from David Miller: "Three minor fixes from David Howells and Paul Gortmaker" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2] sparc32: make copy_to/from_user_page() usable from modular code sparc32: fix build failure for arch_jump_label_transform

vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b hardkernel#4 [ffff88023abd5910] do_trap at ffffffff8152add4 hardkernel#5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 hardkernel#6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 hardkernel#7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] hardkernel#8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] hardkernel#9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>

There are two problematic situations. A deadlock can happen when is_percpu is false because it can get interrupted while holding the spinlock. Then it executes ovs_flow_stats_update() in softirq context which tries to get the same lock. The second sitation is that when is_percpu is true, the code correctly disables BH but only for the local CPU, so the following can happen when locking the remote CPU without disabling BH: CPU#0 CPU#1 ovs_flow_stats_get() stats_read() +->spin_lock remote CPU#1 ovs_flow_stats_get() | <interrupted> stats_read() | ... +--> spin_lock remote CPU#0 | | <interrupted> | ovs_flow_stats_update() | ... | spin_lock local CPU#0 <--+ ovs_flow_stats_update() +---------------------------------- spin_lock local CPU#1 This patch disables BH for both cases fixing the deadlocks. Acked-by: Jesse Gross <jesse@nicira.com> ================================= [ INFO: inconsistent lock state ] 3.14.0-rc8-00007-g632b06a #1 Tainted: G I --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes: (&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch] [<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch] [<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch] [<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch] [<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0 [<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0 [<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0 [<ffffffff816c0798>] genl_rcv+0x28/0x40 [<ffffffff816bf830>] netlink_unicast+0x100/0x1e0 [<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770 [<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0 [<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0 [<ffffffff8166a911>] __sys_sendmsg+0x51/0x90 [<ffffffff8166a962>] SyS_sendmsg+0x12/0x20 [<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b irq event stamp: 1740726 hardirqs last enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840 hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840 softirqs last enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50 softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cpu_stats->lock)->rlock); <Interrupt> lock(&(&cpu_stats->lock)->rlock); *** DEADLOCK *** 5 locks held by swapper/0/0: #0: (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0 hardkernel#4: (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G I 3.14.0-rc8-00007-g632b06a #1 Hardware name: /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0 Call Trace: <IRQ> [<ffffffff817cfe3c>] dump_stack+0x4d/0x66 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180 [<ffffffff810f8963>] mark_lock+0x223/0x2b0 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch] [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch] [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch] [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch] [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480 Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Through a twisty and circuituous path it is possible to currently trick the code into creating a default context and forgetting to pin it immediately into the GGTT. (This requires a system using contexts without an aliasing ppgtt, which is currently restricted to Baytrails machines manually specifying a module parameter to force enable contexts, or on Sandybridge and later that manually disable the aliasing ppgtt.) The consequence is that during module unload we attempt to unpin the default context twice and encounter a BUG remonstrating that we attempt to unpin an unbound object. [ 161.002869] Kernel BUG at f84861f8 [verbose debug info unavailable] [ 161.002875] invalid opcode: 0000 [#1] SMP [ 161.002882] Modules linked in: coretemp kvm_intel kvm crc32_pclmul aesni_intel aes_i586 xts lrw gf128mul ablk_helper cryptd hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_magn_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event dm_multipath scsi_dh asix ppdev usbnet snd_rawmidi mii hid_sensor_hub microcode snd_seq rfcomm bnep snd_seq_device bluetooth snd_timer snd parport_pc binfmt_misc soundcore dw_dmac_pci dw_dmac_core mac_hid lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915(O-) drm_kms_helper(O) igb dca ptp pps_core i2c_algo_bit drm(O) ahci libahci video [ 161.002991] CPU: 0 PID: 2114 Comm: rmmod Tainted: G W O 3.13.0-rc8+ #2 [ 161.002997] Hardware name: NEXCOM VTC1010/Aptio CRB, BIOS 5.6.5 09/24/2013 [ 161.003004] task: dbdd6800 ti: dbe0e000 task.ti: dbe0e000 [ 161.003010] EIP: 0060:[<f84861f8>] EFLAGS: 00010246 CPU: 0 [ 161.003044] EIP is at i915_gem_object_ggtt_unpin+0x88/0x90 [i915] [ 161.003050] EAX: dfce3840 EBX: 00000000 ECX: dfafd690 EDX: dfce3874 [ 161.003056] ESI: c0086b40 EDI: df962e00 EBP: dbe0fe1c ESP: dbe0fe0c [ 161.003062] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 161.003068] CR0: 8005003b CR2: b7718000 CR3: 1bec0000 CR4: 001007f0 [ 161.003076] Stack: [ 161.003081] 00afc014 00000004 c0086b40 dfafc000 dbe0fe38 f8487e5a dfaa5400 c0086b40 [ 161.003099] dfafc000 dfaa5400 dfaa5414 dbe0fe58 f84741aa 00000000 f89c34b9 dfaa5414 [ 161.003117] dfaa5400 dfaa5400 f644b000 dbe0fe6c f89a5443 dfaa5400 f8505000 f644b000 [ 161.003134] Call Trace: [ 161.003169] [<f8487e5a>] i915_gem_context_fini+0xba/0x1c0 [i915] [ 161.003202] [<f84741aa>] i915_driver_unload+0x1fa/0x2f0 [i915] [ 161.003232] [<f89a5443>] drm_dev_unregister+0x23/0x90 [drm] [ 161.003259] [<f89a54ed>] drm_put_dev+0x3d/0x70 [drm] [ 161.003294] [<f8470615>] i915_pci_remove+0x15/0x20 [i915] [ 161.003306] [<c1338a6f>] pci_device_remove+0x2f/0xa0 [ 161.003317] [<c140c871>] __device_release_driver+0x61/0xc0 [ 161.003328] [<c140d12f>] driver_detach+0x8f/0xa0 [ 161.003341] [<c140c54f>] bus_remove_driver+0x4f/0xc0 [ 161.003353] [<c140d708>] driver_unregister+0x28/0x60 [ 161.003362] [<c10cee42>] ? stop_cpus+0x32/0x40 [ 161.003372] [<c10bd510>] ? module_refcount+0x90/0x90 [ 161.003383] [<c13378c5>] pci_unregister_driver+0x15/0x60 [ 161.003413] [<f89a739f>] drm_pci_exit+0x9f/0xb0 [drm] [ 161.003458] [<f84e624a>] i915_exit+0x1b/0x1d [i915] [ 161.003468] [<c10bf8a8>] SyS_delete_module+0x158/0x1f0 [ 161.003480] [<c1173d5d>] ? ____fput+0xd/0x10 [ 161.003488] [<c106f0fe>] ? task_work_run+0x7e/0xb0 [ 161.003499] [<c165a68d>] sysenter_do_call+0x12/0x28 [ 161.003505] Code: 0f b6 4d f3 8d 51 0f 83 e1 f0 83 e2 0f 09 d1 84 d2 88 48 54 75 07 80 a7 91 00 00 00 7f 83 c4 04 5b 5e 5f 5d c3 8d b6 00 00 00 00 <0f> 0b 8d b6 00 00 00 00 55 89 e5 57 56 53 83 ec 64 3e 8d 74 26 [ 161.003586] EIP: [<f84861f8>] i915_gem_object_ggtt_unpin+0x88/0x90 [i915] SS:ESP 0068:dbe0fe0c v2: Rename the local variable (is_default_ctx) to avoid confusion with the function is_default_ctx(). And correct Jesse's email address. Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73985 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> [danvet: Fix up the rebase fail from my first attempt, thankfully pointed out by Ville.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

In our ongoing effort to simplify the TIPC locking structure, we see a need to remove the linked list for tipc_links in the bearer. This can be explained as follows. Currently, we have three different ways to access a link, via three different lists/tables: 1: Via a node hash table: Used by the time-critical outgoing/incoming data paths. (e.g. link_send_sections_fast() and tipc_recv_msg() ): grab net_lock(read) find node from node hash table grab node_lock select link grab bearer_lock send_msg() release bearer_lock release node lock release net_lock 2: Via a global linked list for nodes: Used by configuration commands (link_cmd_set_value()) grab net_lock(read) find node and link from global node list (using link name) grab node_lock update link release node lock release net_lock (Same locking order as above. No problem.) 3: Via the bearer's linked link list: Used by notifications from interface (e.g. tipc_disable_bearer() ) grab net_lock(write) grab bearer_lock get link ptr from bearer's link list get node from link grab node_lock delete link release node lock release bearer_lock release net_lock (Different order from above, but works because we grab the outer net_lock in write mode first, excluding all other access.) The first major goal in our simplification effort is to get rid of the "big" net_lock, replacing it with rcu-locks when accessing the node list and node hash array. This will come in a later patch series. But to get there we first need to rewrite access methods ##2 and 3, since removal of net_lock would introduce three major problems: a) In access method #2, we access the link before taking the protecting node_lock. This will not work once net_lock is gone, so we will have to change the access order. We will deal with this in a later commit in this series, "tipc: add node lock protection to link found by link_find_link()". b) When the outer protection from net_lock is gone, taking bearer_lock and node_lock in opposite order of method 1) and 2) will become an obvious deadlock hazard. This is fixed in the commit ("tipc: remove bearer_lock from tipc_bearer struct") later in this series. c) Similar to what is described in problem a), access method #3 starts with using a link pointer that is unprotected by node_lock, in order to via that pointer find the correct node struct and lock it. Before we remove net_lock, this access order must be altered. This is what we do with this commit. We can avoid introducing problem problem c) by even here using the global node list to find the node, before accessing its links. When we loop though the node list we use the own bearer identity as search criteria, thus easily finding the links that are associated to the resetting/disabling bearer. It should be noted that although this method is somewhat slower than the current list traversal, it is in no way time critical. This is only about resetting or deleting links, something that must be considered relatively infrequent events. As a bonus, we can get rid of the mutual pointers between links and bearers. After this commit, pointer dependency go in one direction only: from the link to the bearer. This commit pre-empts introduction of problem c) as described above. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>

In an earlier commit, ("tipc: remove links list from bearer struct") we described three issues that need to be pre-emptively resolved before we can remove tipc_net_lock. Here we resolve issue a) described in that commit: "a) In access method #2, we access the link before taking the protecting node_lock. This will not work once net_lock is gone, so we will have to change the access order. We will deal with this in a later commit in this series." Here, we change that access order, by ensuring that the function link_find_link() returns only a safe reference for finding the link, i.e., a node pointer and an index into its 'links' array, not the link pointer itself. We also change all callers of this function to first take the node lock before they can check if there still is a valid link pointer at the returned index. Since the function now returns a node pointer rather than a link pointer, we rename it to the more appropriate 'tipc_link_find_owner(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…to next/dt Merge "mvebu dt changes for v3.15 (incremental round #2)" from Jason Cooper: - mvebu - add audio for Armada 370 DB - enable Armada 370/XP watchdog - kirkwood - convert board rd88f6281 - add board rd88f6192 - dove enable watchdog * tag 'mvebu-dt-3.15-2' of git://git.infradead.org/linux-mvebu: ARM: dove: Enable Dove watchdog in the devicetree ARM: kirkwood: Add RSTOUT 'reg' entry to devicetree ARM: mvebu: Enable Armada 370/XP watchdog in the devicetree ARM: Kirkwood: convert rd88f6281-setup.c to DT. ARM: Kirkwood: Add DT description of rd88f6192. ARM: mvebu: enable S/PDIF audio in Armada 370 DB Device Tree ARM: mvebu: add audio support to Armada 370 DB ARM: mvebu: add I2C0 muxing option for Armada 370 SoC ARM: mvebu: add audio I2S controller to Armada 370 Device Tree Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch introduces an i_dir_level field to support large directory. Previously, f2fs maintains multi-level hash tables to find a dentry quickly from a bunch of chiild dentries in a directory, and the hash tables consist of the following tree structure as below. In Documentation/filesystems/f2fs.txt, ---------------------- A : bucket B : block N : MAX_DIR_HASH_DEPTH ---------------------- level #0 | A(2B) | level #1 | A(2B) - A(2B) | level #2 | A(2B) - A(2B) - A(2B) - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) But, if we can guess that a directory will handle a number of child files, we don't need to traverse the tree from level #0 to #N all the time. Since the lower level tables contain relatively small number of dentries, the miss ratio of the target dentry is likely to be high. In order to avoid that, we can configure the hash tables sparsely from level #0 like this. level #0 | A(2B) - A(2B) - A(2B) - A(2B) level #1 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) . | . . . . level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) With this structure, we can skip the ineffective tree searches in lower level hash tables. This patch adds just a facility for this by introducing i_dir_level in f2fs_inode. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Only CF9_COND is appropriate for inclusion in the default chain, not CF9; the latter will poke that register unconditionally, whereas CF9_COND will at least look for PCI configuration method #1 or #2 first (a weak check, but better than nothing.) CF9 should be used for explicit system configuration (command line or DMI) only. Cc: Aubrey Li <aubrey.li@intel.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Link: http://lkml.kernel.org/r/53130A46.1010801@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

When we map pages in the buffer cache, we can do so in GFP_NOFS contexts. However, the vmap interfaces do not provide any method of communicating this information to memory reclaim, and hence we get lockdep complaining about it regularly and occassionally see hangs that may be vmap related reclaim deadlocks. We can also see these same problems from anywhere where we use vmalloc for a large buffer (e.g. attribute code) inside a transaction context. A typical lockdep report shows up as a reclaim state warning like so: [14046.101458] ================================= [14046.102850] [ INFO: inconsistent lock state ] [14046.102850] 3.14.0-rc4+ #2 Not tainted [14046.102850] --------------------------------- [14046.102850] inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. [14046.102850] kswapd0/14 [HC0[0]:SC0[0]:HE1:SE1] takes: [14046.102850] (&xfs_dir_ilock_class){++++?+}, at: [<791a04bb>] xfs_ilock+0xff/0x16a [14046.102850] {RECLAIM_FS-ON-W} state was registered at: [14046.102850] [<7904cdb1>] mark_held_locks+0x81/0xe7 [14046.102850] [<7904d390>] lockdep_trace_alloc+0x5c/0xb4 [14046.102850] [<790c2c28>] kmem_cache_alloc_trace+0x2b/0x11e [14046.102850] [<790ba7f4>] vm_map_ram+0x119/0x3e6 [14046.102850] [<7914e124>] _xfs_buf_map_pages+0x5b/0xcf [14046.102850] [<7914ed74>] xfs_buf_get_map+0x67/0x13f [14046.102850] [<7917506f>] xfs_attr_rmtval_set+0x396/0x4d5 [14046.102850] [<7916e8bb>] xfs_attr_leaf_addname+0x18f/0x37d [14046.102850] [<7916ed9e>] xfs_attr_set_int+0x2f5/0x3e8 [14046.102850] [<7916eefc>] xfs_attr_set+0x6b/0x74 [14046.102850] [<79168355>] xfs_xattr_set+0x61/0x81 [14046.102850] [<790e5b10>] generic_setxattr+0x59/0x68 [14046.102850] [<790e4c06>] __vfs_setxattr_noperm+0x58/0xce [14046.102850] [<790e4d0a>] vfs_setxattr+0x8e/0x92 [14046.102850] [<790e4ddd>] setxattr+0xcf/0x159 [14046.102850] [<790e5423>] SyS_lsetxattr+0x88/0xbb [14046.102850] [<79268438>] sysenter_do_call+0x12/0x36 Now, we can't completely remove these traces - mainly because vm_map_ram() will do GFP_KERNEL allocation and that generates the above warning before we get into the reclaim code, but we can turn them all into false positive warnings. To do that, use the method that DM and other IO context code uses to avoid this problem: there is a process flag to tell memory reclaim not to do IO that we can set appropriately. That prevents GFP_KERNEL context reclaim being done from deep inside the vmalloc code in places we can't directly pass a GFP_NOFS context to. That interface has a pair of wrapper functions: memalloc_noio_save() and memalloc_noio_restore(). Adding them around vm_map_ram and the vzalloc call in kmem_alloc_large() will prevent deadlocks and most lockdep reports for this issue. Also, convert the vzalloc() call in kmem_alloc_large() to use __vmalloc() so that we can pass the correct gfp context to the data page allocation routine inside __vmalloc() so that it is clear that GFP_NOFS context is important to this vmalloc call. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>

…ebu into next/drivers mvebu watchdog driver changes for v3.15 (incremental #2) - remove warnings by using %pa for phys_addr_t * tag 'mvebu-watchdog-3.15-2' of git://git.infradead.org/linux-mvebu: watchdog: orion_wdt: Use %pa to print 'phys_addr_t' Signed-off-by: Olof Johansson <olof@lixom.net>

If a driver calls enable_irq_wake() on a gpio turned interrupt from the msm pinctrl driver we'll get a lockdep warning like so: ============================================= [ INFO: possible recursive locking detected ] 3.14.0-rc3 #2 Not tainted --------------------------------------------- modprobe/52 is trying to acquire lock: (&irq_desc_lock_class){-.....}, at: [<c026aea0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.....}, at: [<c026aea0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by modprobe/52: #0: (&__lockdep_no_validate__){......}, at: [<c04f2864>] __driver_attach+0x48/0x98 #1: (&__lockdep_no_validate__){......}, at: [<c04f2874>] __driver_attach+0x58/0x98 #2: (&irq_desc_lock_class){-.....}, at: [<c026aea0>] __irq_get_desc_lock+0x48/0x88 #3: (&(&pctrl->lock)->rlock){......}, at: [<c04bb4b8>] msm_gpio_irq_set_wake+0x20/0xa8 Silence it by putting the gpios into their own lock class. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The SMBUS tracepoints can be enabled thusly: echo 1 >/sys/kernel/debug/tracing/events/i2c/enable and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace that look like: ... smbus_read: i2c-0 a=051 f=0000 c=fa BYTE_DATA ... smbus_reply: i2c-0 a=051 f=0000 c=fa BYTE_DATA l=1 [39] ... smbus_result: i2c-0 a=051 f=0000 c=fa BYTE_DATA rd res=0 formatted as: i2c-<adapter-nr> a=<addr> f=<flags> c=<command> <protocol-name> <rd|wr> res=<result> l=<data-len> [<data-block>] The adapters to be traced can be selected by something like: echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter Note that this shares the same filter and enablement as i2c. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

…nto next/soc Merge "mvebu soc changes for v3.15 (incremental pull #2)" from Jason Cooper: - mvebu - Add Armada 375, 380 and 385 SoCs - kirkwood - move kirkwood DT support to mach-mvebu - add mostly DT support for HP T5325 thin client * tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add HP T5325 thin client ARM: kirkwood: select dtbs based on SoC ARM: kirkwood: Remove redundant kexec code ARM: mvebu: Armada 375/38x depend on MULTI_V7 ARM: mvebu: Simplify headers and make local ARM: mvebu: Enable mvebu-soc-id on Kirkwood ARM: mvebu: Let kirkwood use the system controller for restart ARM: mvebu: Move kirkwood DT boards into mach-mvebu ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU ARM: Fix default CPU selection for ARCH_MULTI_V5 ARM: MM: Add DT binding for Feroceon L2 cache ARM: orion: Move cache-feroceon-l2.h out of plat-orion ARM: mvebu: Add ARCH_MULTI_V7 to SoCs ARM: kirkwood: ioremap memory control register ARM: kirkwood: ioremap the cpu_config register before using it. ARM: kirkwood: Separate board-dt from common and pcie code. ARM: kirkwood: Drop printing the SoC type and revision ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT ARM: kirkwood: Give pm.c its own header file. ARM: mvebu: Rename the ARCH_MVEBU menu option Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…bu into next/drivers Merge "mvebu drivers for v3.15" from Jason Cooper: pull request #1: - mvebu mbus - use of_find_matching_node_and_match - rtc - use PTR_ERR_OR_ZERO in isl12057 - work around issue in mv where date returned is 2038 - kirkwood -> mach-mvebu - various Kconfig oneliners to allow building kirkwood in -mvebu/ pull request #2: - reset - re-use qnap-poweroff driver for Synology NASs * tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu: Power: Reset: Generalize qnap-poweroff to work on Synology devices. drivers: Enable building of Kirkwood drivers for mach-mvebu rtc: mv: reset date if after year 2038 rtc: isl12057: use PTR_ERR_OR_ZERO to fix coccinelle warnings bus: mvebu-mbus: make use of of_find_matching_node_and_match Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…vebu into next/boards Merge "mvebu defconfig changes for v3.15 (incremental pull #2)" from Jason Cooper - add multi_v5_defconfig - add mvebu_v5_defconfig - kirkwood: add HP T5325 devices * tag 'mvebu-defconfig-3.15-2' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig ARM: config: Add mvebu_v5_defconfig ARM: config: Add a multi_v5_defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…bu into clk-next-mvebu clock: mvebu new SoC changes for v3.15 (incremental pull #2) - mvebu (Armada 375) - fix ratio register offest - mvebu (Armada 380) - expand core divider clock driver to support 380 SoC (enables nand support)

I'm transitioning maintainership of the xHCI driver to my colleague, Mathias Nyman. The xHCI driver is in good shape, and it's time for me to move on to the next shiny thing. :) There's a few known outstanding bugs that we have plans for how to fix: 1. Clear Halt issue that means some USB scanners fail after one scan 2. TD fragment issue that means USB ethernet scatter-gather doesn't work 3. xHCI command queue issues that cause the driver to die when a USB device doesn't respond to a Set Address control transfer when another command is outstanding. 4. USB port power off for Haswell-ULT is a complete disaster. Mathias is putting the finishing touches on a fix for #3, which will make it much easier to craft a solution for #1. Dan William has an ACKed RFC for hardkernel#4 that may land in 3.16, after much testing. I'm working with Mathias to come up with an architectural solution for #2. I don't foresee very many big features coming down the pipe for USB (which is part of the reason it's a good time to change now). SSIC is mostly a hardware-level change (perhaps with some PHY drivers needed), USB 3.1 is again mostly a hardware-level change with some software engineering to communicate the speed increase to the device drivers, add new device descriptor parsing to lsusb, but definitely nothing as big as USB 3.0 was. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@intel.com>

The scenario here is that someone calls enable_irq_wake() from somewhere in the code. This will result in the lockdep producing a backtrace as can be seen below. In my case, this problem is triggered when using the wl1271 (TI WlCore) driver found in drivers/net/wireless/ti/ . The problem cause is rather obvious from the backtrace, but let's outline the dependency. enable_irq_wake() grabs the IRQ buslock in irq_set_irq_wake(), which in turns calls mxs_gpio_set_wake_irq() . But mxs_gpio_set_wake_irq() calls enable_irq_wake() again on the one-level-higher IRQ , thus it tries to grab the IRQ buslock again in irq_set_irq_wake() . Because the spinlock in irq_set_irq_wake()->irq_get_desc_buslock()->__irq_get_desc_lock() is not marked as recursive, lockdep will spew the stuff below. We know we can safely re-enter the lock, so use IRQ_GC_INIT_NESTED_LOCK to fix the spew. ============================================= [ INFO: possible recursive locking detected ] 3.10.33-00012-gf06b763-dirty hardkernel#61 Not tainted --------------------------------------------- kworker/0:1/18 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/0:1/18: #0: (events){.+.+.+}, at: [<c0036308>] process_one_work+0x134/0x4a4 #1: ((&fw_work->work)){+.+.+.}, at: [<c0036308>] process_one_work+0x134/0x4a4 #2: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 stack backtrace: CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 3.10.33-00012-gf06b763-dirty hardkernel#61 Workqueue: events request_firmware_work_func [<c0013eb4>] (unwind_backtrace+0x0/0xf0) from [<c0011c74>] (show_stack+0x10/0x14) [<c0011c74>] (show_stack+0x10/0x14) from [<c005bb08>] (__lock_acquire+0x140c/0x1a64) [<c005bb08>] (__lock_acquire+0x140c/0x1a64) from [<c005c6a8>] (lock_acquire+0x9c/0x104) [<c005c6a8>] (lock_acquire+0x9c/0x104) from [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) from [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) from [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) from [<c0068cf4>] (set_irq_wake_real+0x30/0x44) [<c0068cf4>] (set_irq_wake_real+0x30/0x44) from [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) from [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) from [<c02be5e8>] (request_firmware_work_func+0x38/0x58) [<c02be5e8>] (request_firmware_work_func+0x38/0x58) from [<c0036394>] (process_one_work+0x1c0/0x4a4) [<c0036394>] (process_one_work+0x1c0/0x4a4) from [<c0036a4c>] (worker_thread+0x138/0x394) [<c0036a4c>] (worker_thread+0x138/0x394) from [<c003cb74>] (kthread+0xa4/0xb0) [<c003cb74>] (kthread+0xa4/0xb0) from [<c000ee00>] (ret_from_fork+0x14/0x34) wlcore: loaded Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When stopping nfsd, I got BUG messages, and soft lockup messages, The problem is cuased by double rb_erase() in nfs4_state_destroy_net() and destroy_client(). This patch just let nfsd traversing unconfirmed client through hash-table instead of rbtree. [ 2325.021995] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2325.022809] IP: [<ffffffff8133c18c>] rb_erase+0x14c/0x390 [ 2325.022982] PGD 7a91b067 PUD 7a33d067 PMD 0 [ 2325.022982] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 2325.022982] Modules linked in: nfsd(OF) cfg80211 rfkill bridge stp llc snd_intel8x0 snd_ac97_codec ac97_bus auth_rpcgss nfs_acl serio_raw e1000 i2c_piix4 ppdev snd_pcm snd_timer lockd pcspkr joydev parport_pc snd parport i2c_core soundcore microcode sunrpc ata_generic pata_acpi [last unloaded: nfsd] [ 2325.022982] CPU: 1 PID: 2123 Comm: nfsd Tainted: GF O 3.14.0-rc8+ #2 [ 2325.022982] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2325.022982] task: ffff88007b384800 ti: ffff8800797f6000 task.ti: ffff8800797f6000 [ 2325.022982] RIP: 0010:[<ffffffff8133c18c>] [<ffffffff8133c18c>] rb_erase+0x14c/0x390 [ 2325.022982] RSP: 0018:ffff8800797f7d98 EFLAGS: 00010246 [ 2325.022982] RAX: ffff880079c1f010 RBX: ffff880079f4c828 RCX: 0000000000000000 [ 2325.022982] RDX: 0000000000000000 RSI: ffff880079bcb070 RDI: ffff880079f4c810 [ 2325.022982] RBP: ffff8800797f7d98 R08: 0000000000000000 R09: ffff88007964fc70 [ 2325.022982] R10: 0000000000000000 R11: 0000000000000400 R12: ffff880079f4c800 [ 2325.022982] R13: ffff880079bcb000 R14: ffff8800797f7da8 R15: ffff880079f4c860 [ 2325.022982] FS: 0000000000000000(0000) GS:ffff88007f900000(0000) knlGS:0000000000000000 [ 2325.022982] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2325.022982] CR2: 0000000000000000 CR3: 000000007a3ef000 CR4: 00000000000006e0 [ 2325.022982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2325.022982] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2325.022982] Stack: [ 2325.022982] ffff8800797f7de0 ffffffffa0191c6e ffff8800797f7da8 ffff8800797f7da8 [ 2325.022982] ffff880079f4c810 ffff880079bcb000 ffffffff81cc26c0 ffff880079c1f010 [ 2325.022982] ffff880079bcb070 ffff8800797f7e28 ffffffffa01977f2 ffff8800797f7df0 [ 2325.022982] Call Trace: [ 2325.022982] [<ffffffffa0191c6e>] destroy_client+0x32e/0x3b0 [nfsd] [ 2325.022982] [<ffffffffa01977f2>] nfs4_state_shutdown_net+0x1a2/0x220 [nfsd] [ 2325.022982] [<ffffffffa01700b8>] nfsd_shutdown_net+0x38/0x70 [nfsd] [ 2325.022982] [<ffffffffa017013e>] nfsd_last_thread+0x4e/0x80 [nfsd] [ 2325.022982] [<ffffffffa001f1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc] [ 2325.022982] [<ffffffffa017064b>] nfsd_destroy+0x5b/0x80 [nfsd] [ 2325.022982] [<ffffffffa0170773>] nfsd+0x103/0x130 [nfsd] [ 2325.022982] [<ffffffffa0170670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 2325.022982] [<ffffffff810a8232>] kthread+0xd2/0xf0 [ 2325.022982] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 2325.022982] [<ffffffff816c493c>] ret_from_fork+0x7c/0xb0 [ 2325.022982] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 2325.022982] Code: 48 83 e1 fc 48 89 10 0f 84 02 01 00 00 48 3b 41 10 0f 84 08 01 00 00 48 89 51 08 48 89 fa e9 74 ff ff ff 0f 1f 40 00 48 8b 50 10 <f6> 02 01 0f 84 93 00 00 00 48 8b 7a 10 48 85 ff 74 05 f6 07 01 [ 2325.022982] RIP [<ffffffff8133c18c>] rb_erase+0x14c/0x390 [ 2325.022982] RSP <ffff8800797f7d98> [ 2325.022982] CR2: 0000000000000000 [ 2325.022982] ---[ end trace 28c27ed011655e57 ]--- [ 228.064071] BUG: soft lockup - CPU#0 stuck for 22s! [nfsd:558] [ 228.064428] Modules linked in: ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw nfsd(OF) auth_rpcgss nfs_acl lockd snd_intel8x0 snd_ac97_codec ac97_bus joydev snd_pcm snd_timer e1000 sunrpc snd ppdev parport_pc serio_raw pcspkr i2c_piix4 microcode parport soundcore i2c_core ata_generic pata_acpi [ 228.064539] CPU: 0 PID: 558 Comm: nfsd Tainted: GF O 3.14.0-rc8+ #2 [ 228.064539] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 228.064539] task: ffff880076adec00 ti: ffff880074616000 task.ti: ffff880074616000 [ 228.064539] RIP: 0010:[<ffffffff8133ba17>] [<ffffffff8133ba17>] rb_next+0x27/0x50 [ 228.064539] RSP: 0018:ffff880074617de0 EFLAGS: 00000282 [ 228.064539] RAX: ffff880074478010 RBX: ffff88007446f860 RCX: 0000000000000014 [ 228.064539] RDX: ffff880074478010 RSI: 0000000000000000 RDI: ffff880074478010 [ 228.064539] RBP: ffff880074617de0 R08: 0000000000000000 R09: 0000000000000012 [ 228.064539] R10: 0000000000000001 R11: ffffffffffffffec R12: ffffea0001d11a00 [ 228.064539] R13: ffff88007f401400 R14: ffff88007446f800 R15: ffff880074617d50 [ 228.064539] FS: 0000000000000000(0000) GS:ffff88007f800000(0000) knlGS:0000000000000000 [ 228.064539] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 228.064539] CR2: 00007fe9ac6ec000 CR3: 000000007a5d6000 CR4: 00000000000006f0 [ 228.064539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 228.064539] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 228.064539] Stack: [ 228.064539] ffff880074617e28 ffffffffa01ab7db ffff880074617df0 ffff880074617df0 [ 228.064539] ffff880079273000 ffffffff81cc26c0 ffffffff81cc26c0 0000000000000000 [ 228.064539] 0000000000000000 ffff880074617e48 ffffffffa01840b8 ffffffff81cc26c0 [ 228.064539] Call Trace: [ 228.064539] [<ffffffffa01ab7db>] nfs4_state_shutdown_net+0x18b/0x220 [nfsd] [ 228.064539] [<ffffffffa01840b8>] nfsd_shutdown_net+0x38/0x70 [nfsd] [ 228.064539] [<ffffffffa018413e>] nfsd_last_thread+0x4e/0x80 [nfsd] [ 228.064539] [<ffffffffa00aa1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc] [ 228.064539] [<ffffffffa018464b>] nfsd_destroy+0x5b/0x80 [nfsd] [ 228.064539] [<ffffffffa0184773>] nfsd+0x103/0x130 [nfsd] [ 228.064539] [<ffffffffa0184670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 228.064539] [<ffffffff810a8232>] kthread+0xd2/0xf0 [ 228.064539] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 228.064539] [<ffffffff816c493c>] ret_from_fork+0x7c/0xb0 [ 228.064539] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 228.064539] Code: 1f 44 00 00 55 48 8b 17 48 89 e5 48 39 d7 74 3b 48 8b 47 08 48 85 c0 75 0e eb 25 66 0f 1f 84 00 00 00 00 00 48 89 d0 48 8b 50 10 <48> 85 d2 75 f4 5d c3 66 90 48 3b 78 08 75 f6 48 8b 10 48 89 c7 Fixes: ac55fdc (nfsd: move the confirmed and unconfirmed hlists...) Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Paul Durrant says: ==================== xen-netback: fix rx slot estimation Sander Eikelenboom reported an issue with ring overflow in netback in 3.14-rc3. This turns outo be be because of a bug in the ring slot estimation code. This patch series fixes the slot estimation, fixes the BUG_ON() that was supposed to catch the issue that Sander ran into and also makes a small fix to start_new_rx_buffer(). v3: - Added a cap of MAX_SKB_FRAGS to estimate in patch #2 v2: - Added BUG_ON() to patch #1 - Added more explanation to patch #3 ==================== Reported-By: Sander Eikelenboom <linux@eikelenboom.it> Tested-By: Sander Eikelenboom <linux@eikelenboom.it> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>

We have a struct_mutex deadlock during driver init on ILK [ 54.320273] ============================================= [ 54.320371] [ INFO: possible recursive locking detected ] [ 54.320471] 3.15.0-rc2-flip_race+ #2 Not tainted [ 54.320567] --------------------------------------------- [ 54.320665] modprobe/2178 is trying to acquire lock: [ 54.320762] (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa0568b05>] intel_enable_gt_powersave+0xa5/0x9d0 [i915] [ 54.321111] [ 54.321111] but task is already holding lock: [ 54.321250] (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa05b4c2e>] intel_modeset_init_hw+0x3e/0x60 [i915] [ 54.321583] [ 54.321583] other info that might help us debug this: [ 54.321724] Possible unsafe locking scenario: [ 54.321724] [ 54.321863] CPU0 [ 54.321954] ---- [ 54.322046] lock(&dev->struct_mutex); [ 54.322221] lock(&dev->struct_mutex); [ 54.322397] [ 54.322397] *** DEADLOCK *** [ 54.322397] [ 54.322638] May be due to missing lock nesting notation [ 54.322638] [ 54.322781] 4 locks held by modprobe/2178: [ 54.322875] #0: (&dev->mutex){......}, at: [<ffffffff813592eb>] __driver_attach+0x5b/0xb0 [ 54.323230] #1: (&dev->mutex){......}, at: [<ffffffff813592f9>] __driver_attach+0x69/0xb0 [ 54.323582] #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa04e1e0d>] drm_dev_register+0x2d/0x120 [drm] [ 54.323945] #3: (&dev->struct_mutex){+.+.+.}, at: [<ffffffffa05b4c2e>] intel_modeset_init_hw+0x3e/0x60 [i915] This regression got introduced in: commit 586d527 Author: Imre Deak <imre.deak@intel.com> Date: Mon Apr 14 20:24:28 2014 +0300 drm/i915: move getting struct_mutex lower in the callstack during GPU reset Fix the problem by not taking struct_mutex around intel_enable_gt_powersave() in intel_modeset_init_hw() since intel_enable_gt_powersave() now grabs the mutex itself. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

During the recent conversion of cgroup to kernfs, cgroup_tree_mutex which nests above both the kernfs s_active protection and cgroup_mutex is added to synchronize cgroup file type operations as cgroup_mutex needed to be grabbed from some file operations and thus can't be put above s_active protection. While this arrangement mostly worked for cgroup, this triggered the following lockdep warning. ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc3-next-20140430-sasha-00016-g4e281fa-dirty hardkernel#429 Tainted: G W ------------------------------------------------------- trinity-c173/9024 is trying to acquire lock: (blkcg_pol_mutex){+.+.+.}, at: blkcg_reset_stats (include/linux/spinlock.h:328 block/blk-cgroup.c:455) but task is already holding lock: (s_active#89){++++.+}, at: kernfs_fop_write (fs/kernfs/file.c:283) which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (s_active#89){++++.+}: lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602) __kernfs_remove (arch/x86/include/asm/atomic.h:27 fs/kernfs/dir.c:352 fs/kernfs/dir.c:1024) kernfs_remove_by_name_ns (fs/kernfs/dir.c:1219) cgroup_addrm_files (include/linux/kernfs.h:427 kernel/cgroup.c:1074 kernel/cgroup.c:2899) cgroup_clear_dir (kernel/cgroup.c:1092 (discriminator 2)) rebind_subsystems (kernel/cgroup.c:1144) cgroup_setup_root (kernel/cgroup.c:1568) cgroup_mount (kernel/cgroup.c:1716) mount_fs (fs/super.c:1094) vfs_kern_mount (fs/namespace.c:899) do_mount (fs/namespace.c:2238 fs/namespace.c:2561) SyS_mount (fs/namespace.c:2758 fs/namespace.c:2729) tracesys (arch/x86/kernel/entry_64.S:746) -> #1 (cgroup_tree_mutex){+.+.+.}: lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602) mutex_lock_nested (kernel/locking/mutex.c:486 kernel/locking/mutex.c:587) cgroup_add_cftypes (include/linux/list.h:76 kernel/cgroup.c:3040) blkcg_policy_register (block/blk-cgroup.c:1106) throtl_init (block/blk-throttle.c:1694) do_one_initcall (init/main.c:789) kernel_init_freeable (init/main.c:854 init/main.c:863 init/main.c:882 init/main.c:1003) kernel_init (init/main.c:935) ret_from_fork (arch/x86/kernel/entry_64.S:552) -> #0 (blkcg_pol_mutex){+.+.+.}: __lock_acquire (kernel/locking/lockdep.c:1840 kernel/locking/lockdep.c:1945 kernel/locking/lockdep.c:2131 kernel/locking/lockdep.c:3182) lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602) mutex_lock_nested (kernel/locking/mutex.c:486 kernel/locking/mutex.c:587) blkcg_reset_stats (include/linux/spinlock.h:328 block/blk-cgroup.c:455) cgroup_file_write (kernel/cgroup.c:2714) kernfs_fop_write (fs/kernfs/file.c:295) vfs_write (fs/read_write.c:532) SyS_write (fs/read_write.c:584 fs/read_write.c:576) tracesys (arch/x86/kernel/entry_64.S:746) other info that might help us debug this: Chain exists of: blkcg_pol_mutex --> cgroup_tree_mutex --> s_active#89 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#89); lock(cgroup_tree_mutex); lock(s_active#89); lock(blkcg_pol_mutex); *** DEADLOCK *** 4 locks held by trinity-c173/9024: #0: (&f->f_pos_lock){+.+.+.}, at: __fdget_pos (fs/file.c:714) #1: (sb_writers#18){.+.+.+}, at: vfs_write (include/linux/fs.h:2255 fs/read_write.c:530) #2: (&of->mutex){+.+.+.}, at: kernfs_fop_write (fs/kernfs/file.c:283) #3: (s_active#89){++++.+}, at: kernfs_fop_write (fs/kernfs/file.c:283) stack backtrace: CPU: 3 PID: 9024 Comm: trinity-c173 Tainted: G W 3.15.0-rc3-next-20140430-sasha-00016-g4e281fa-dirty hardkernel#429 ffffffff919687b0 ffff8805f6373bb8 ffffffff8e52cdbb 0000000000000002 ffffffff919d8400 ffff8805f6373c08 ffffffff8e51fb88 0000000000000004 ffff8805f6373c98 ffff8805f6373c08 ffff88061be70d98 ffff88061be70dd0 Call Trace: dump_stack (lib/dump_stack.c:52) print_circular_bug (kernel/locking/lockdep.c:1216) __lock_acquire (kernel/locking/lockdep.c:1840 kernel/locking/lockdep.c:1945 kernel/locking/lockdep.c:2131 kernel/locking/lockdep.c:3182) lock_acquire (arch/x86/include/asm/current.h:14 kernel/locking/lockdep.c:3602) mutex_lock_nested (kernel/locking/mutex.c:486 kernel/locking/mutex.c:587) blkcg_reset_stats (include/linux/spinlock.h:328 block/blk-cgroup.c:455) cgroup_file_write (kernel/cgroup.c:2714) kernfs_fop_write (fs/kernfs/file.c:295) vfs_write (fs/read_write.c:532) SyS_write (fs/read_write.c:584 fs/read_write.c:576) This is a highly unlikely but valid circular dependency between "echo 1 > blkcg.reset_stats" and cfq module [un]loading. cgroup is going through further locking update which will remove this complication but for now let's use trylock on blkcg_pol_mutex and retry the file operation if the trylock fails. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Sasha Levin <sasha.levin@oracle.com> References: http://lkml.kernel.org/g/5363C04B.4010400@oracle.com

ARC Linux (not supporting native unaligned access) was failing to boot because __start_kprobe_blacklist was not aligned. This was because per generated vmlinux.lds it was emitted right next to .rodata with strings etc hence could be randomly unaligned. Fix that by ensuring a word alignment. While 4 would suffice for 32bit arches and problem at hand, it is probably better to put 8. | Path: (null) CPU: 0 PID: 1 Comm: swapper Not tainted | 3.15.0-rc3-next-20140430 #2 | task: 8f044000 ti: 8f01e000 task.ti: 8f01e000 | | [ECR ]: 0x00230400 => Misaligned r/w from 0x800fb0d3 | [EFA ]: 0x800fb0d3 | [BLINK ]: do_one_initcall+0x86/0x1bc | [ERET ]: init_kprobes+0x52/0x120 Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: <torvalds@linux-foundation.org> Cc: <rusty@rustcorp.com.au> Cc: <rdunlap@infradead.org> Cc: <jeremy@goop.org> Cc: <arnd@arndb.de> Cc: <dl9pf@gmx.de> Cc: <sparse@chrisli.org> Cc: <anil.s.keshavamurthy@intel.com> Cc: <davem@davemloft.net> Cc: <ananth@in.ibm.com> Cc: <masami.hiramatsu.pt@hitachi.com> Cc: <chrisw@sous-sol.org> Cc: <akataria@vmware.com> Cc: anton Kolesov <Anton.Kolesov@synopsys.com> Link: http://lkml.kernel.org/r/5361DB14.7010406@synopsys.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

Wang Weidong says: ==================== sctp: fix kfree static array pointer in sctp_sysctl_net_unregister patch #1 revert the efb842c("sctp: optimize the sctp_sysctl_net_register") patch #2 add a checking for sctp_sysctl_net_register ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…ebu into fixes Merge 'ARM: mvebu: DT fixes for v3.15 (incr #2)' from Jason Cooper: mvebu DT fixes for v3.15 (incremental #2) - kirkwood: fix mis-located pcie controller nodes * tag 'mvebu-dt-fixes-3.15-2' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: fix mislocated pcie-controller nodes Signed-off-by: Olof Johansson <olof@lixom.net>

There was a deadlock in monitor mode when we were setting the channel if the channel was not 1. ====================================================== [ INFO: possible circular locking dependency detected ] 3.14.3 hardkernel#4 Not tainted ------------------------------------------------------- iw/3323 is trying to acquire lock: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] but task is already holding lock: (&local->iflist_mtx){+.+...}, at: [<ffffffffa0609e0a>] ieee80211_set_monitor_channel+0x5a/0x1b0 [mac80211] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&local->iflist_mtx){+.+...}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0518189>] iwl_mvm_recalc_multicast+0x49/0xa0 [iwlmvm] [<ffffffffa051822e>] iwl_mvm_configure_filter+0x4e/0x70 [iwlmvm] [<ffffffffa05e6d43>] ieee80211_configure_filter+0x153/0x5f0 [mac80211] [<ffffffffa05e71f5>] ieee80211_reconfig_filter+0x15/0x20 [mac80211] [snip] -> #1 (&mvm->mutex){+.+.+.}: [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa0517246>] iwl_mvm_add_chanctx+0x56/0xe0 [iwlmvm] [<ffffffffa062ca1e>] ieee80211_new_chanctx+0x13e/0x410 [mac80211] [<ffffffffa062d953>] ieee80211_vif_use_channel+0x1c3/0x5a0 [mac80211] [<ffffffffa06035ab>] ieee80211_add_virtual_monitor+0x1ab/0x6b0 [mac80211] [<ffffffffa06052ea>] ieee80211_do_open+0xe6a/0x15a0 [mac80211] [<ffffffffa0605a79>] ieee80211_open+0x59/0x60 [mac80211] [snip] -> #0 (&local->chanctx_mtx){+.+.+.}: [<ffffffff810d6cb7>] check_prevs_add+0x977/0x980 [<ffffffff810d95bb>] __lock_acquire+0xb3b/0x13b0 [<ffffffff810d9ee0>] lock_acquire+0xb0/0x1f0 [<ffffffff817eb9c8>] mutex_lock_nested+0x78/0x4f0 [<ffffffffa062e2f2>] ieee80211_vif_release_channel+0x42/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] [snip] other info that might help us debug this: Chain exists of: &local->chanctx_mtx --> &mvm->mutex --> &local->iflist_mtx Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&local->iflist_mtx); lock(&mvm->mutex); lock(&local->iflist_mtx); lock(&local->chanctx_mtx); *** DEADLOCK *** This deadlock actually occurs: INFO: task iw:3323 blocked for more than 120 seconds. Not tainted 3.14.3 hardkernel#4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. iw D ffff8800c8afcd80 4192 3323 3322 0x00000000 ffff880078fdb7e0 0000000000000046 ffff8800c8afcd80 ffff880078fdbfd8 00000000001d5540 00000000001d5540 ffff8801141b0000 ffff8800c8afcd80 ffff880078ff9e38 ffff880078ff9e38 ffff880078ff9e40 0000000000000246 Call Trace: [<ffffffff817ea841>] schedule_preempt_disabled+0x31/0x80 [<ffffffff817ebaed>] mutex_lock_nested+0x19d/0x4f0 [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa06225cf>] ? ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa052a680>] ? iwl_mvm_power_mac_update_mode+0xc0/0xc0 [iwlmvm] [<ffffffffa06225cf>] ieee80211_iterate_active_interfaces+0x2f/0x60 [mac80211] [<ffffffffa0529357>] _iwl_mvm_power_update_binding+0x27/0x80 [iwlmvm] [<ffffffffa0516eb1>] iwl_mvm_unassign_vif_chanctx+0x81/0xc0 [iwlmvm] [<ffffffffa062d3ff>] __ieee80211_vif_release_channel+0xdf/0x470 [mac80211] [<ffffffffa062e2fa>] ieee80211_vif_release_channel+0x4a/0xb0 [mac80211] [<ffffffffa0609ec3>] ieee80211_set_monitor_channel+0x113/0x1b0 [mac80211] [<ffffffffa058fb37>] cfg80211_set_monitor_channel+0x77/0x2b0 [cfg80211] [<ffffffffa056e0b2>] __nl80211_set_channel+0x122/0x140 [cfg80211] [<ffffffffa0581374>] nl80211_set_wiphy+0x284/0xaf0 [cfg80211] This fixes https://bugzilla.kernel.org/show_bug.cgi?id=75541 Cc: <stable@vger.kernel.org> [3.13+] Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

All tests should pass with and without JIT. Example output: test_bpf: #0 TAX 35 16 16 PASS test_bpf: #1 TXA 7 7 7 PASS test_bpf: #2 ADD_SUB_MUL_K 10 PASS test_bpf: #3 DIV_KX 33 PASS test_bpf: hardkernel#4 AND_OR_LSH_K 10 10 PASS test_bpf: hardkernel#5 LD_IND 8 8 8 PASS test_bpf: hardkernel#6 LD_ABS 8 8 8 PASS test_bpf: hardkernel#7 LD_ABS_LL 13 14 PASS test_bpf: hardkernel#8 LD_IND_LL 12 12 12 PASS test_bpf: hardkernel#9 LD_ABS_NET 10 12 PASS test_bpf: hardkernel#10 LD_IND_NET 11 12 12 PASS ... Numbers are times in nsec per filter for given input data. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>

After 96d365e ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem"), css task iterators requires sleepable context as it may block on css_set_rwsem. I missed that cgroup_freezer was iterating tasks under IRQ-safe spinlock freezer->lock. This leads to errors like the following on freezer state reads and transitions. BUG: sleeping function called from invalid context at /work /os/work/kernel/locking/rwsem.c:20 in_atomic(): 0, irqs_disabled(): 0, pid: 462, name: bash 5 locks held by bash/462: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff811f0843>] vfs_write+0x1a3/0x1c0 #1: (&of->mutex){+.+.+.}, at: [<ffffffff8126d78b>] kernfs_fop_write+0xbb/0x170 #2: (s_active#70){.+.+.+}, at: [<ffffffff8126d793>] kernfs_fop_write+0xc3/0x170 #3: (freezer_mutex){+.+...}, at: [<ffffffff81135981>] freezer_write+0x61/0x1e0 hardkernel#4: (rcu_read_lock){......}, at: [<ffffffff81135973>] freezer_write+0x53/0x1e0 Preemption disabled at:[<ffffffff81104404>] console_unlock+0x1e4/0x460 CPU: 3 PID: 462 Comm: bash Not tainted 3.15.0-rc1-work+ hardkernel#10 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 ffff88000916a6d0 ffff88000e0a3da0 ffffffff81cf8c96 0000000000000000 ffff88000e0a3dc8 ffffffff810cf4f2 ffffffff82388040 ffff880013aaf740 0000000000000002 ffff88000e0a3de8 ffffffff81d05974 0000000000000246 Call Trace: [<ffffffff81cf8c96>] dump_stack+0x4e/0x7a [<ffffffff810cf4f2>] __might_sleep+0x162/0x260 [<ffffffff81d05974>] down_read+0x24/0x60 [<ffffffff81133e87>] css_task_iter_start+0x27/0x70 [<ffffffff8113584d>] freezer_apply_state+0x5d/0x130 [<ffffffff81135a16>] freezer_write+0xf6/0x1e0 [<ffffffff8112eb88>] cgroup_file_write+0xd8/0x230 [<ffffffff8126d7b7>] kernfs_fop_write+0xe7/0x170 [<ffffffff811f0756>] vfs_write+0xb6/0x1c0 [<ffffffff811f121d>] SyS_write+0x4d/0xc0 [<ffffffff81d08292>] system_call_fastpath+0x16/0x1b freezer->lock used to be used in hot paths but that time is long gone and there's no reason for the lock to be IRQ-safe spinlock or even per-cgroup. In fact, given the fact that a cgroup may contain large number of tasks, it's not a good idea to iterate over them while holding IRQ-safe spinlock. Let's simplify locking by replacing per-cgroup freezer->lock with global freezer_mutex. This also makes the comments explaining the intricacies of policy inheritance and the locking around it as the states are protected by a common mutex. The conversion is mostly straight-forward. The followings are worth mentioning. * freezer_css_online() no longer needs double locking. * freezer_attach() now performs propagation simply while holding freezer_mutex. update_if_frozen() race no longer exists and the comment is removed. * freezer_fork() now tests whether the task is in root cgroup using the new task_css_is_root() without doing rcu_read_lock/unlock(). If not, it grabs freezer_mutex and performs the operation. * freezer_read() and freezer_change_state() grab freezer_mutex across the whole operation and pin the css while iterating so that each descendant processing happens in sleepable context. Fixes: 96d365e ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem") Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>

Jon Maloy says: ==================== tipc: bug fixes and improvements Intensive and extensive testing has revealed some rather infrequent problems related to flow control, buffer handling and link establishment. Commits ##1 to 4 deal with these problems. The remaining four commits are just code improvments, aiming at making the code more comprehensible and maintainable. There are no functional enhancements in this series. v2: Fixed a typo in commit log #2. Otherwise no changes from v1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…xt/dt Merge "at91: DT for 3.16 #2" from Nicolas Ferre: 3.16: second DT series: - at91sam9rl and at91sam9261 fixes about PLL ranges - at91sam9261 more comprehensive support for SSC - sama5d3 Xplained: addition of pull-ups, PWM and PMIC (regulator) * tag 'at91-dt2' of git://github.com/at91linux/linux-at91: ARM: at91/dt: at91-sama5d3_xplained: add the regulator device node ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained ARM: at91: add PWM pinctrl to SAMA5D3 ARM: at91: add pull-up to i2c[02] on SAMA5D3 Xplained ARM: at91/dt: sam9rl: Fix PLL output range and mck divisors ARM: at91/dt: sam9261: Add ssc2, SSC clocks and pcks ARM: at91/dt: sam9261: Fix PLL output ranges and other clocks divisors Signed-off-by: Olof Johansson <olof@lixom.net>

…ock. This triggers every time we do a SCSI abort: virtscsi_tmf -> virtscsi_kick_cmd (grab lock and call) -> virtscsi_add_cmd -> virtqueue_add_sgs (GFP_NOIO) Logs look like this: sd 0:0:0:0: [sda] abort BUG: sleeping function called from invalid context at mm/slub.c:966 in_atomic(): 1, irqs_disabled(): 1, pid: 6, name: kworker/u2:0 3 locks held by kworker/u2:0/6: #0: ("scsi_tmf_%d"shost->host_no){......}, at: [<c0153180>] process_one_work+0xe0/0x3d0 #1: ((&(&cmd->abort_work)->work)){......}, at: [<c0153180>] process_one_work+0xe0/0x3d0 #2: (&(&virtscsi_vq->vq_lock)->rlock){......}, at: [<c043f508>] virtscsi_kick_cmd+0x18/0x1b0 CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 3.15.0-rc5+ hardkernel#110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-rc1-0-gb1d4dc9-20140515_140003-nilsson.home.kraxel.org 04/01/2014 Workqueue: scsi_tmf_0 scmd_eh_abort_handler Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Paolo Bonzini <pbonzini@redhat.com>

… into fixes mvebu fixes for v3.15 (incremental #2) - Armada 38x - fix PCIe dt nodes for handling more interfaces - mvebu - mvebu-soc-id: fix clock handling and PCIe interface disabling. * tag 'mvebu-fixes-3.15-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix definitions of PCIe interfaces on Armada 38x ARM: mvebu: mvebu-soc-id: keep clock enabled if PCIe unit is enabled ARM: mvebu: mvebu-soc-id: add missing clk_put() call Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…nto next/soc Merge "mvebu SoC changes for v3.16 (incremental #2)" from Jason Cooper <jason@lakedaemon.net>: - mvebu - fix coherency on big-endian in -next - hardware IO coherency - L2/PCIe deadlock workaround - small coherency cleanups * tag 'mvebu-soc-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: returns ll_get_cpuid() to ll_get_coherency_cpumask() ARM: mvebu: improve comments in coherency_ll.S ARM: mvebu: fix indentation of assembly instructions in coherency_ll.S ARM: mvebu: fix big endian booting after coherency code rework ARM: mvebu: coherency: fix registration of PCI bus notifier when !PCI ARM: mvebu: implement L2/PCIe deadlock workaround ARM: mvebu: use hardware I/O coherency also for PCI devices Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…to next/dt Merge "mvebu DT changes for v3.16 (incremental #2)" from Jason Cooper: - kirkwood - add OpenRD boards - make keymile boards bootable with latest kernels - mvebu - add ehci/xhci to Armada 375/38x boards * tag 'mvebu-dt-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file ARM: dts: kirkwood: add kirkwood-km_common DTSI files ARM: dts: kirkwood: resynch 98dx4122 dtsi ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375 ARM: mvebu: add Device Tree description of the xHCI controller on Armada 375 ARM: mvebu: add Device Tree description of the EHCI controller on Armada 38x ARM: mvebu: add Device Tree description of xHCI controllers on Armada 38x ARM: Kirkwood: DT versions of OpenRD boards Signed-off-by: Arnd Bergmann <arnd@arndb.de>

…vebu into next/defconfig Merge "mvebu defconfig changes for v3.16 (incremental #2)" from Jason Cooper: - mvebu - enable MSI and XHCI in mvebu_v7_defconfig * tag 'mvebu-defconfig-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: enable MSI support in mvebu_v7_defconfig ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig ARM: multi_v5_defconfig: Enable sound modules needed for t5325 ARM: mvebu_v5_defconfig: Enable sound modules needed for t5325 ARM: mvebu: defconfig: add MTD_SPI_NOR (new dependency for M25P80) ARM: configs: add ahci_mvebu to mvebu_v7_defconfig ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the mvebu_v7_defconfig ARM: mvebu: enable fhandle in the defconfigs ARM: mvebu: Enable nfsroot in the defconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The dwc2 IP on the SOCFPGA cannot use the default HW configured FIFO sizes. The total FIFO depth as read from GHWCFG3 reports 0x1f80 or 8064 32-bit words. But the GRXFSIZ, GNPTXFSIZ, and HPTXFSIZ register defaults to 0x2000 or 8192 32-bit words. So the driver cannot just use the fifo sizes as read from those registers. For platforms that face the same issue, this commits sets the RX, periodic TX, and non-periodic TX fifo size to those that are recommended v2.93a spec for the DWC2 IP. Implements Method #2 from the Synopsys v2.93a spec for the DWC2. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Daniel Mack says: ==================== mdio: Parse DT nodes for auto-probed PHYs Here's v2. v1 -> v2: * Switch to of_property_read_u32() in patch #1 * Check for mdio->dev_of_node in patch #2 * Added Florian's Reviewed-by: tags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

There used to be only one path out of __slab_alloc(), and ALLOC_SLOWPATH got bumped in that exit path. Now there are two, and a bunch of gotos. ALLOC_SLOWPATH can now get set more than once during a single call to __slab_alloc() which is pretty bogus. Here's the sequence: 1. Enter __slab_alloc(), fall through all the way to the stat(s, ALLOC_SLOWPATH); 2. hit 'if (!freelist)', and bump DEACTIVATE_BYPASS, jump to new_slab (goto #1) 3. Hit 'if (c->partial)', bump CPU_PARTIAL_ALLOC, goto redo (goto #2) 4. Fall through in the same path we did before all the way to stat(s, ALLOC_SLOWPATH) 5. bump ALLOC_REFILL stat, then return Doing this is obviously bogus. It keeps us from being able to accurately compare ALLOC_SLOWPATH vs. ALLOC_FASTPATH. It also means that the total number of allocs always exceeds the total number of frees. This patch moves stat(s, ALLOC_SLOWPATH) to be called from the same place that __slab_alloc() is. This makes it much less likely that ALLOC_SLOWPATH will get botched again in the spaghetti-code inside __slab_alloc(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

…kup detector Peter Wu noticed the following splat on his machine when updating /proc/sys/kernel/watchdog_thresh: BUG: sleeping function called from invalid context at mm/slub.c:965 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (sb_writers#3){.+.+.+}, at: [<ffffffff8117b663>] vfs_write+0x143/0x180 #1: (watchdog_proc_mutex){+.+.+.}, at: [<ffffffff810e02d3>] proc_dowatchdog+0x33/0x110 #2: (cpu_hotplug.lock){.+.+.+}, at: [<ffffffff810589c2>] get_online_cpus+0x32/0x80 Preemption disabled at:[<ffffffff810e0384>] proc_dowatchdog+0xe4/0x110 CPU: 0 PID: 1 Comm: init Not tainted 3.16.0-rc1-testing hardkernel#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x4e/0x7a __might_sleep+0x11d/0x190 kmem_cache_alloc_trace+0x4e/0x1e0 perf_event_alloc+0x55/0x440 perf_event_create_kernel_counter+0x26/0xe0 watchdog_nmi_enable+0x75/0x140 update_timers_all_cpus+0x53/0xa0 proc_dowatchdog+0xe4/0x110 proc_sys_call_handler+0xb3/0xc0 proc_sys_write+0x14/0x20 vfs_write+0xad/0x180 SyS_write+0x49/0xb0 system_call_fastpath+0x16/0x1b NMI watchdog: disabled (cpu0): hardware events not enabled What happened is after updating the watchdog_thresh, the lockup detector is restarted to utilize the new value. Part of this process involved disabling preemption. Once preemption was disabled, perf tried to allocate a new event (as part of the restart). This caused the above BUG_ON as you can't sleep with preemption disabled. The preemption restriction seemed agressive as we are not doing anything on that particular cpu, but with all the online cpus (which are protected by the get_online_cpus lock). Remove the restriction and the BUG_ON goes away. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Reported-by: Peter Wu <peter@lekensteyn.nl> Tested-by: Peter Wu <peter@lekensteyn.nl> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cxgb4_netdev maybe lead to dead lock, since it uses a spin lock, and be called in both thread and softirq context, but not disable BH, the lockdep report is below; In fact, cxgb4_netdev only reads adap_rcu_list with RCU protection, so not need to hold spin lock again. ================================= [ INFO: inconsistent lock state ] 3.14.7+ hardkernel#24 Tainted: G C O --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. radvd/3794 [HC0[0]:SC1[1]:HE1:SE0] takes: (adap_rcu_lock){+.?...}, at: [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810fca81>] __lock_acquire+0x34a/0xe48 [<ffffffff810fd98b>] lock_acquire+0x82/0x9d [<ffffffff815d6ff8>] _raw_spin_lock+0x34/0x43 [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4] [<ffffffffa0998beb>] cxgb4_inet6addr_handler+0x117/0x12c [cxgb4] [<ffffffff815da98b>] notifier_call_chain+0x32/0x5c [<ffffffff815da9f9>] __atomic_notifier_call_chain+0x44/0x6e [<ffffffff815daa32>] atomic_notifier_call_chain+0xf/0x11 [<ffffffff815b1356>] inet6addr_notifier_call_chain+0x16/0x18 [<ffffffffa01f72e5>] ipv6_add_addr+0x404/0x46e [ipv6] [<ffffffffa01f8df0>] addrconf_add_linklocal+0x5f/0x95 [ipv6] [<ffffffffa01fc3e9>] addrconf_notify+0x632/0x841 [ipv6] [<ffffffff815da98b>] notifier_call_chain+0x32/0x5c [<ffffffff810e09a1>] __raw_notifier_call_chain+0x9/0xb [<ffffffff810e09b2>] raw_notifier_call_chain+0xf/0x11 [<ffffffff8151b3b7>] call_netdevice_notifiers_info+0x4e/0x56 [<ffffffff8151b3d0>] call_netdevice_notifiers+0x11/0x13 [<ffffffff8151c0a6>] netdev_state_change+0x1f/0x38 [<ffffffff8152f004>] linkwatch_do_dev+0x3b/0x49 [<ffffffff8152f184>] __linkwatch_run_queue+0x10b/0x144 [<ffffffff8152f1dd>] linkwatch_event+0x20/0x27 [<ffffffff810d7bc0>] process_one_work+0x1cb/0x2ee [<ffffffff810d7e3b>] worker_thread+0x12e/0x1fc [<ffffffff810dd391>] kthread+0xc4/0xcc [<ffffffff815dc48c>] ret_from_fork+0x7c/0xb0 irq event stamp: 3388 hardirqs last enabled at (3388): [<ffffffff810c6c85>] __local_bh_enable_ip+0xaa/0xd9 hardirqs last disabled at (3387): [<ffffffff810c6c2d>] __local_bh_enable_ip+0x52/0xd9 softirqs last enabled at (3288): [<ffffffffa01f1d5b>] rcu_read_unlock_bh+0x0/0x2f [ipv6] softirqs last disabled at (3289): [<ffffffff815ddafc>] do_softirq_own_stack+0x1c/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(adap_rcu_lock); <Interrupt> lock(adap_rcu_lock); *** DEADLOCK *** 5 locks held by radvd/3794: #0: (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffffa020b85a>] rawv6_sendmsg+0x74b/0xa4d [ipv6] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8151ac6b>] rcu_lock_acquire+0x0/0x29 #2: (rcu_read_lock){.+.+..}, at: [<ffffffffa01f4cca>] rcu_lock_acquire.constprop.16+0x0/0x30 [ipv6] #3: (rcu_read_lock){.+.+..}, at: [<ffffffff810e09b4>] rcu_lock_acquire+0x0/0x29 hardkernel#4: (rcu_read_lock){.+.+..}, at: [<ffffffffa0998782>] rcu_lock_acquire.constprop.40+0x0/0x30 [cxgb4] stack backtrace: CPU: 7 PID: 3794 Comm: radvd Tainted: G C O 3.14.7+ hardkernel#24 Hardware name: Supermicro X7DBU/X7DBU, BIOS 6.00 12/03/2007 ffffffff81f15990 ffff88012fdc36a8 ffffffff815d0016 0000000000000006 ffff8800c80dc2a0 ffff88012fdc3708 ffffffff815cc727 0000000000000001 0000000000000001 ffff880100000000 ffffffff81015b02 ffff8800c80dcb58 Call Trace: <IRQ> [<ffffffff815d0016>] dump_stack+0x4e/0x71 [<ffffffff815cc727>] print_usage_bug+0x1ec/0x1fd [<ffffffff81015b02>] ? save_stack_trace+0x27/0x44 [<ffffffff810fbfaa>] ? check_usage_backwards+0xa0/0xa0 [<ffffffff810fc640>] mark_lock+0x11b/0x212 [<ffffffff810fca0b>] __lock_acquire+0x2d4/0xe48 [<ffffffff810fbfaa>] ? check_usage_backwards+0xa0/0xa0 [<ffffffff810fbff6>] ? check_usage_forwards+0x4c/0xa6 [<ffffffff810c6c8a>] ? __local_bh_enable_ip+0xaf/0xd9 [<ffffffff810fd98b>] lock_acquire+0x82/0x9d [<ffffffffa09989ea>] ? clip_add+0x2c/0x116 [cxgb4] [<ffffffffa0998782>] ? rcu_read_unlock+0x23/0x23 [cxgb4] [<ffffffff815d6ff8>] _raw_spin_lock+0x34/0x43 [<ffffffffa09989ea>] ? clip_add+0x2c/0x116 [cxgb4] [<ffffffffa09987b0>] ? rcu_lock_acquire.constprop.40+0x2e/0x30 [cxgb4] [<ffffffffa0998782>] ? rcu_read_unlock+0x23/0x23 [cxgb4] [<ffffffffa09989ea>] clip_add+0x2c/0x116 [cxgb4] [<ffffffffa0998beb>] cxgb4_inet6addr_handler+0x117/0x12c [cxgb4] [<ffffffff810fd99d>] ? lock_acquire+0x94/0x9d [<ffffffff810e09b4>] ? raw_notifier_call_chain+0x11/0x11 [<ffffffff815da98b>] notifier_call_chain+0x32/0x5c [<ffffffff815da9f9>] __atomic_notifier_call_chain+0x44/0x6e [<ffffffff815daa32>] atomic_notifier_call_chain+0xf/0x11 [<ffffffff815b1356>] inet6addr_notifier_call_chain+0x16/0x18 [<ffffffffa01f72e5>] ipv6_add_addr+0x404/0x46e [ipv6] [<ffffffff810fde6a>] ? trace_hardirqs_on+0xd/0xf [<ffffffffa01fb634>] addrconf_prefix_rcv+0x385/0x6ea [ipv6] [<ffffffffa0207950>] ndisc_rcv+0x9d3/0xd76 [ipv6] [<ffffffffa020d536>] icmpv6_rcv+0x592/0x67b [ipv6] [<ffffffff810c6c85>] ? __local_bh_enable_ip+0xaa/0xd9 [<ffffffff810c6c85>] ? __local_bh_enable_ip+0xaa/0xd9 [<ffffffff810fd8dc>] ? lock_release+0x14e/0x17b [<ffffffffa020df97>] ? rcu_read_unlock+0x21/0x23 [ipv6] [<ffffffff8150df52>] ? rcu_read_unlock+0x23/0x23 [<ffffffffa01f4ede>] ip6_input_finish+0x1e4/0x2fc [ipv6] [<ffffffffa01f540b>] ip6_input+0x33/0x38 [ipv6] [<ffffffffa01f5557>] ip6_mc_input+0x147/0x160 [ipv6] [<ffffffffa01f4ba3>] ip6_rcv_finish+0x7c/0x81 [ipv6] [<ffffffffa01f5397>] ipv6_rcv+0x3a1/0x3e2 [ipv6] [<ffffffff8151ef96>] __netif_receive_skb_core+0x4ab/0x511 [<ffffffff810fdc94>] ? mark_held_locks+0x71/0x99 [<ffffffff8151f0c0>] ? process_backlog+0x69/0x15e [<ffffffff8151f045>] __netif_receive_skb+0x49/0x5b [<ffffffff8151f0cf>] process_backlog+0x78/0x15e [<ffffffff8151f571>] ? net_rx_action+0x1a2/0x1cc [<ffffffff8151f47b>] net_rx_action+0xac/0x1cc [<ffffffff810c69b7>] ? __do_softirq+0xad/0x218 [<ffffffff810c69ff>] __do_softirq+0xf5/0x218 [<ffffffff815ddafc>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c6bb6>] do_softirq+0x38/0x5d [<ffffffffa01f1d5b>] ? ip6_copy_metadata+0x156/0x156 [ipv6] [<ffffffff810c6c78>] __local_bh_enable_ip+0x9d/0xd9 [<ffffffffa01f1d88>] rcu_read_unlock_bh+0x2d/0x2f [ipv6] [<ffffffffa01f28b4>] ip6_finish_output2+0x381/0x3d8 [ipv6] [<ffffffffa01f49ef>] ip6_finish_output+0x6e/0x73 [ipv6] [<ffffffffa01f4a70>] ip6_output+0x7c/0xa8 [ipv6] [<ffffffff815b1bfa>] dst_output+0x18/0x1c [<ffffffff815b1c9e>] ip6_local_out+0x1c/0x21 [<ffffffffa01f2489>] ip6_push_pending_frames+0x37d/0x427 [ipv6] [<ffffffff81558af8>] ? skb_orphan+0x39/0x39 [<ffffffffa020b85a>] ? rawv6_sendmsg+0x74b/0xa4d [ipv6] [<ffffffffa020ba51>] rawv6_sendmsg+0x942/0xa4d [ipv6] [<ffffffff81584cd2>] inet_sendmsg+0x3d/0x66 [<ffffffff81508930>] __sock_sendmsg_nosec+0x25/0x27 [<ffffffff8150b0d7>] sock_sendmsg+0x5a/0x7b [<ffffffff810fd8dc>] ? lock_release+0x14e/0x17b [<ffffffff8116d756>] ? might_fault+0x9e/0xa5 [<ffffffff8116d70d>] ? might_fault+0x55/0xa5 [<ffffffff81508cb1>] ? copy_from_user+0x2a/0x2c [<ffffffff8150b70c>] ___sys_sendmsg+0x226/0x2d9 [<ffffffff810fcd25>] ? __lock_acquire+0x5ee/0xe48 [<ffffffff810fde01>] ? trace_hardirqs_on_caller+0x145/0x1a1 [<ffffffff8118efcb>] ? slab_free_hook.isra.71+0x50/0x59 [<ffffffff8115c81f>] ? release_pages+0xbc/0x181 [<ffffffff810fd99d>] ? lock_acquire+0x94/0x9d [<ffffffff81115e97>] ? read_seqcount_begin.constprop.25+0x73/0x90 [<ffffffff8150c408>] __sys_sendmsg+0x3d/0x5b [<ffffffff8150c433>] SyS_sendmsg+0xd/0x19 [<ffffffff815dc53d>] system_call_fastpath+0x1a/0x1f Reported-by: Ben Greear <greearb@candelatech.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>

… into fixes mvebu fixes for v3.16 (round #2) - mvebu - Fix PCIe deadlock now that SMP is enabled - Fix cpuidle for big-endian systems * tag 'mvebu-fixes-3.16-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk Signed-off-by: Olof Johansson <olof@lixom.net>

Writing to either "cpuset.cpus" or "cpuset.mems" file flushes cpuset_hotplug_work so that cpu or memory hotunplug doesn't end up migrating tasks off a cpuset after new resources are added to it. As cpuset_hotplug_work calls into cgroup core via cgroup_transfer_tasks(), this flushing adds the dependency to cgroup core locking from cpuset_write_resmak(). This used to be okay because cgroup interface files were protected by a different mutex; however, 8353da1 ("cgroup: remove cgroup_tree_mutex") simplified the cgroup core locking and this dependency became a deadlock hazard - cgroup file removal performed under cgroup core lock tries to drain on-going file operation which is trying to flush cpuset_hotplug_work blocked on the same cgroup core lock. The locking simplification was done because kernfs added an a lot easier way to deal with circular dependencies involving kernfs active protection. Let's use the same strategy in cpuset and break active protection in cpuset_write_resmask(). While it isn't the prettiest, this is a very rare, likely unique, situation which also goes away on the unified hierarchy. The commands to trigger the deadlock warning without the patch and the lockdep output follow. localhost:/ # mount -t cgroup -o cpuset xxx /cpuset localhost:/ # mkdir /cpuset/tmp localhost:/ # echo 1 > /cpuset/tmp/cpuset.cpus localhost:/ # echo 0 > cpuset/tmp/cpuset.mems localhost:/ # echo $$ > /cpuset/tmp/tasks localhost:/ # echo 0 > /sys/devices/system/cpu/cpu1/online ====================================================== [ INFO: possible circular locking dependency detected ] 3.16.0-rc1-0.1-default+ hardkernel#7 Not tainted ------------------------------------------------------- kworker/1:0/32649 is trying to acquire lock: (cgroup_mutex){+.+.+.}, at: [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 but task is already holding lock: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (cpuset_hotplug_work){+.+...}: ... -> #1 (s_active#175){++++.+}: ... -> #0 (cgroup_mutex){+.+.+.}: ... other info that might help us debug this: Chain exists of: cgroup_mutex --> s_active#175 --> cpuset_hotplug_work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuset_hotplug_work); lock(s_active#175); lock(cpuset_hotplug_work); lock(cgroup_mutex); *** DEADLOCK *** 2 locks held by kworker/1:0/32649: #0: ("events"){.+.+.+}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 #1: (cpuset_hotplug_work){+.+...}, at: [<ffffffff81085412>] process_one_work+0x192/0x520 stack backtrace: CPU: 1 PID: 32649 Comm: kworker/1:0 Not tainted 3.16.0-rc1-0.1-default+ hardkernel#7 ... Call Trace: [<ffffffff815a5f78>] dump_stack+0x72/0x8a [<ffffffff810c263f>] print_circular_bug+0x10f/0x120 [<ffffffff810c481e>] check_prev_add+0x43e/0x4b0 [<ffffffff810c4ee6>] validate_chain+0x656/0x7c0 [<ffffffff810c53d2>] __lock_acquire+0x382/0x660 [<ffffffff810c57a9>] lock_acquire+0xf9/0x170 [<ffffffff815aa13f>] mutex_lock_nested+0x6f/0x380 [<ffffffff8110e3d7>] cgroup_transfer_tasks+0x37/0x150 [<ffffffff811129c0>] hotplug_update_tasks_insane+0x110/0x1d0 [<ffffffff81112bbd>] cpuset_hotplug_update_tasks+0x13d/0x180 [<ffffffff811148ec>] cpuset_hotplug_workfn+0x18c/0x630 [<ffffffff810854d4>] process_one_work+0x254/0x520 [<ffffffff810875dd>] worker_thread+0x13d/0x3d0 [<ffffffff8108e0c8>] kthread+0xf8/0x100 [<ffffffff815acaec>] ret_from_fork+0x7c/0xb0 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Li Zefan <lizefan@huawei.com> Tested-by: Li Zefan <lizefan@huawei.com>

If an inode is renamed, it should be registered as file_lost_pino to conduct checkpoint at f2fs_sync_file. Otherwise, the inode cannot be recovered due to no dent_mark in the following scenario. Note that, this scenario is from xfstests/322. 1. create "a" 2. fsync "a" 3. rename "a" to "b" 4. fsync "b" 5. Sudden power-cut After recovery is done, "b" should be seen. However, the result shows "a", since the recovery procedure does not enter recover_dentry due to no dent_mark. The reason is like below. - The nid of "a" is checkpointed during #2, f2fs_sync_file. - The inode page for "b" produced by #3 is written without dent_mark by sync_node_pages. So, this patch fixes this bug by assinging file_lost_pino to the "a"'s inode. If the pino is lost, f2fs_sync_file conducts checkpoint, and then recovers the latest pino and its dentry information for further recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

This fixes the following lockdep complaint: [ INFO: possible circular locking dependency detected ] 3.16.0-rc2-mm1+ hardkernel#7 Tainted: G O ------------------------------------------------------- kworker/u24:0/4356 is trying to acquire lock: (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 but task is already holding lock: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); *** DEADLOCK *** 6 locks held by kworker/u24:0/4356: #0: ("writeback"){.+.+.+}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 #2: (&type->s_umount_key#22){++++++}, at: [<ffffffff811a9c74>] grab_super_passive+0x44/0x90 #3: (jbd2_handle){+.+...}, at: [<ffffffff812979f9>] start_this_handle+0x189/0x5f0 hardkernel#4: (&ei->i_data_sem){++++..}, at: [<ffffffff81247062>] ext4_map_blocks+0x132/0x550 hardkernel#5: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 stack backtrace: CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ hardkernel#7 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback bdi_writeback_workfn (flush-253:0) ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930 Call Trace: [<ffffffff815df0bb>] dump_stack+0x4e/0x68 [<ffffffff815db3dd>] print_circular_bug+0x1fb/0x20c [<ffffffff810a7a3e>] __lock_acquire+0x163e/0x1d00 [<ffffffff815e89dc>] ? retint_restore_args+0xe/0xe [<ffffffff815ddc7b>] ? __slab_alloc+0x4a8/0x4ce [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff810a8707>] lock_acquire+0x87/0x120 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8128592d>] ? ext4_es_free_extent+0x5d/0x70 [<ffffffff815e6f09>] _raw_spin_lock+0x39/0x50 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8119760b>] ? kmem_cache_alloc+0x18b/0x1a0 [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 [<ffffffff812869b8>] ext4_es_insert_extent+0xc8/0x180 [<ffffffff812470f4>] ext4_map_blocks+0x1c4/0x550 [<ffffffff8124c4c4>] ext4_writepages+0x6d4/0xd00 ... Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Minchan Kim <minchan@kernel.org> Cc: stable@vger.kernel.org Cc: Zheng Liu <gnehzuil.liu@gmail.com>

Madalin-Cristian reported crashs happening after a recent commit (5a4ae5f "vlan: unnecessary to check if vlan_pcpu_stats is NULL") ----------------------------------------------------------------------- root@p5040ds:~# vconfig add eth8 1 root@p5040ds:~# vconfig rem eth8.1 Unable to handle kernel paging request for data at address 0x2bc88028 Faulting instruction address: 0xc058e950 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: CPU: 3 PID: 2167 Comm: vconfig Tainted: G W 3.16.0-rc3-00346-g65e85bf #2 task: e7264d90 ti: e2c2c000 task.ti: e2c2c000 NIP: c058e950 LR: c058ea30 CTR: c058e900 REGS: e2c2db20 TRAP: 0300 Tainted: G W (3.16.0-rc3-00346-g65e85bf) MSR: 00029002 <CE,EE,ME> CR: 48000428 XER: 20000000 DEAR: 2bc88028 ESR: 00000000 GPR00: c047299c e2c2dbd0 e7264d90 00000000 2bc88000 00000000 ffffffff 00000000 GPR08: 0000000f 00000000 000000ff 00000000 28000422 10121928 10100000 10100000 GPR16: 10100000 00000000 c07c5968 00000000 00000000 00000000 e2c2dc48 e7838000 GPR24: c07c5bac c07c58a8 e77290cc c07b0000 00000000 c05de6c0 e7838000 e2c2dc48 NIP [c058e950] vlan_dev_get_stats64+0x50/0x170 LR [c058ea30] vlan_dev_get_stats64+0x130/0x170 Call Trace: [e2c2dbd0] [ffffffea] 0xffffffea (unreliable) [e2c2dc20] [c047299c] dev_get_stats+0x4c/0x140 [e2c2dc40] [c0488ca8] rtnl_fill_ifinfo+0x3d8/0x960 [e2c2dd70] [c0489f4c] rtmsg_ifinfo+0x6c/0x110 [e2c2dd90] [c04731d4] rollback_registered_many+0x344/0x3b0 [e2c2ddd0] [c047332c] rollback_registered+0x2c/0x50 [e2c2ddf0] [c0476058] unregister_netdevice_queue+0x78/0xf0 [e2c2de00] [c058d800] unregister_vlan_dev+0xc0/0x160 [e2c2de20] [c058e360] vlan_ioctl_handler+0x1c0/0x550 [e2c2de90] [c045d11c] sock_ioctl+0x28c/0x2f0 [e2c2deb0] [c010d070] do_vfs_ioctl+0x90/0x7b0 [e2c2df20] [c010d7d0] SyS_ioctl+0x40/0x80 [e2c2df40] [c000f924] ret_from_syscall+0x0/0x3c Fix this problem by freeing percpu stats from dev->destructor() instead of ndo_uninit() Reported-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Fixes: 5a4ae5f ("vlan: unnecessary to check if vlan_pcpu_stats is NULL") Cc: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…fixes Merge "at91: fixes for 3.16 #2" from Nicolas Ferre: Second AT91 fixes series for 3.16 - fix clock definitions after the move to CCF for: * at91sam9n12 (ohci) * at91sam9x5 (ohci, pwm) * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock Signed-off-by: Olof Johansson <olof@lixom.net>

commit d25f06e upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b hardkernel#4 [ffff88023abd5910] do_trap at ffffffff8152add4 hardkernel#5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 hardkernel#6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 hardkernel#7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] hardkernel#8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] hardkernel#9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit a585f87 upstream. The scenario here is that someone calls enable_irq_wake() from somewhere in the code. This will result in the lockdep producing a backtrace as can be seen below. In my case, this problem is triggered when using the wl1271 (TI WlCore) driver found in drivers/net/wireless/ti/ . The problem cause is rather obvious from the backtrace, but let's outline the dependency. enable_irq_wake() grabs the IRQ buslock in irq_set_irq_wake(), which in turns calls mxs_gpio_set_wake_irq() . But mxs_gpio_set_wake_irq() calls enable_irq_wake() again on the one-level-higher IRQ , thus it tries to grab the IRQ buslock again in irq_set_irq_wake() . Because the spinlock in irq_set_irq_wake()->irq_get_desc_buslock()->__irq_get_desc_lock() is not marked as recursive, lockdep will spew the stuff below. We know we can safely re-enter the lock, so use IRQ_GC_INIT_NESTED_LOCK to fix the spew. ============================================= [ INFO: possible recursive locking detected ] 3.10.33-00012-gf06b763-dirty hardkernel#61 Not tainted --------------------------------------------- kworker/0:1/18 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/0:1/18: #0: (events){.+.+.+}, at: [<c0036308>] process_one_work+0x134/0x4a4 #1: ((&fw_work->work)){+.+.+.}, at: [<c0036308>] process_one_work+0x134/0x4a4 #2: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 stack backtrace: CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 3.10.33-00012-gf06b763-dirty hardkernel#61 Workqueue: events request_firmware_work_func [<c0013eb4>] (unwind_backtrace+0x0/0xf0) from [<c0011c74>] (show_stack+0x10/0x14) [<c0011c74>] (show_stack+0x10/0x14) from [<c005bb08>] (__lock_acquire+0x140c/0x1a64) [<c005bb08>] (__lock_acquire+0x140c/0x1a64) from [<c005c6a8>] (lock_acquire+0x9c/0x104) [<c005c6a8>] (lock_acquire+0x9c/0x104) from [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) from [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) from [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) from [<c0068cf4>] (set_irq_wake_real+0x30/0x44) [<c0068cf4>] (set_irq_wake_real+0x30/0x44) from [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) from [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) from [<c02be5e8>] (request_firmware_work_func+0x38/0x58) [<c02be5e8>] (request_firmware_work_func+0x38/0x58) from [<c0036394>] (process_one_work+0x1c0/0x4a4) [<c0036394>] (process_one_work+0x1c0/0x4a4) from [<c0036a4c>] (worker_thread+0x138/0x394) [<c0036a4c>] (worker_thread+0x138/0x394) from [<c003cb74>] (kthread+0xa4/0xb0) [<c003cb74>] (kthread+0xa4/0xb0) from [<c000ee00>] (ret_from_fork+0x14/0x34) wlcore: loaded Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 2b90563 upstream. When stopping nfsd, I got BUG messages, and soft lockup messages, The problem is cuased by double rb_erase() in nfs4_state_destroy_net() and destroy_client(). This patch just let nfsd traversing unconfirmed client through hash-table instead of rbtree. [ 2325.021995] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2325.022809] IP: [<ffffffff8133c18c>] rb_erase+0x14c/0x390 [ 2325.022982] PGD 7a91b067 PUD 7a33d067 PMD 0 [ 2325.022982] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 2325.022982] Modules linked in: nfsd(OF) cfg80211 rfkill bridge stp llc snd_intel8x0 snd_ac97_codec ac97_bus auth_rpcgss nfs_acl serio_raw e1000 i2c_piix4 ppdev snd_pcm snd_timer lockd pcspkr joydev parport_pc snd parport i2c_core soundcore microcode sunrpc ata_generic pata_acpi [last unloaded: nfsd] [ 2325.022982] CPU: 1 PID: 2123 Comm: nfsd Tainted: GF O 3.14.0-rc8+ #2 [ 2325.022982] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2325.022982] task: ffff88007b384800 ti: ffff8800797f6000 task.ti: ffff8800797f6000 [ 2325.022982] RIP: 0010:[<ffffffff8133c18c>] [<ffffffff8133c18c>] rb_erase+0x14c/0x390 [ 2325.022982] RSP: 0018:ffff8800797f7d98 EFLAGS: 00010246 [ 2325.022982] RAX: ffff880079c1f010 RBX: ffff880079f4c828 RCX: 0000000000000000 [ 2325.022982] RDX: 0000000000000000 RSI: ffff880079bcb070 RDI: ffff880079f4c810 [ 2325.022982] RBP: ffff8800797f7d98 R08: 0000000000000000 R09: ffff88007964fc70 [ 2325.022982] R10: 0000000000000000 R11: 0000000000000400 R12: ffff880079f4c800 [ 2325.022982] R13: ffff880079bcb000 R14: ffff8800797f7da8 R15: ffff880079f4c860 [ 2325.022982] FS: 0000000000000000(0000) GS:ffff88007f900000(0000) knlGS:0000000000000000 [ 2325.022982] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2325.022982] CR2: 0000000000000000 CR3: 000000007a3ef000 CR4: 00000000000006e0 [ 2325.022982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2325.022982] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2325.022982] Stack: [ 2325.022982] ffff8800797f7de0 ffffffffa0191c6e ffff8800797f7da8 ffff8800797f7da8 [ 2325.022982] ffff880079f4c810 ffff880079bcb000 ffffffff81cc26c0 ffff880079c1f010 [ 2325.022982] ffff880079bcb070 ffff8800797f7e28 ffffffffa01977f2 ffff8800797f7df0 [ 2325.022982] Call Trace: [ 2325.022982] [<ffffffffa0191c6e>] destroy_client+0x32e/0x3b0 [nfsd] [ 2325.022982] [<ffffffffa01977f2>] nfs4_state_shutdown_net+0x1a2/0x220 [nfsd] [ 2325.022982] [<ffffffffa01700b8>] nfsd_shutdown_net+0x38/0x70 [nfsd] [ 2325.022982] [<ffffffffa017013e>] nfsd_last_thread+0x4e/0x80 [nfsd] [ 2325.022982] [<ffffffffa001f1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc] [ 2325.022982] [<ffffffffa017064b>] nfsd_destroy+0x5b/0x80 [nfsd] [ 2325.022982] [<ffffffffa0170773>] nfsd+0x103/0x130 [nfsd] [ 2325.022982] [<ffffffffa0170670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 2325.022982] [<ffffffff810a8232>] kthread+0xd2/0xf0 [ 2325.022982] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 2325.022982] [<ffffffff816c493c>] ret_from_fork+0x7c/0xb0 [ 2325.022982] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 2325.022982] Code: 48 83 e1 fc 48 89 10 0f 84 02 01 00 00 48 3b 41 10 0f 84 08 01 00 00 48 89 51 08 48 89 fa e9 74 ff ff ff 0f 1f 40 00 48 8b 50 10 <f6> 02 01 0f 84 93 00 00 00 48 8b 7a 10 48 85 ff 74 05 f6 07 01 [ 2325.022982] RIP [<ffffffff8133c18c>] rb_erase+0x14c/0x390 [ 2325.022982] RSP <ffff8800797f7d98> [ 2325.022982] CR2: 0000000000000000 [ 2325.022982] ---[ end trace 28c27ed011655e57 ]--- [ 228.064071] BUG: soft lockup - CPU#0 stuck for 22s! [nfsd:558] [ 228.064428] Modules linked in: ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw nfsd(OF) auth_rpcgss nfs_acl lockd snd_intel8x0 snd_ac97_codec ac97_bus joydev snd_pcm snd_timer e1000 sunrpc snd ppdev parport_pc serio_raw pcspkr i2c_piix4 microcode parport soundcore i2c_core ata_generic pata_acpi [ 228.064539] CPU: 0 PID: 558 Comm: nfsd Tainted: GF O 3.14.0-rc8+ #2 [ 228.064539] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 228.064539] task: ffff880076adec00 ti: ffff880074616000 task.ti: ffff880074616000 [ 228.064539] RIP: 0010:[<ffffffff8133ba17>] [<ffffffff8133ba17>] rb_next+0x27/0x50 [ 228.064539] RSP: 0018:ffff880074617de0 EFLAGS: 00000282 [ 228.064539] RAX: ffff880074478010 RBX: ffff88007446f860 RCX: 0000000000000014 [ 228.064539] RDX: ffff880074478010 RSI: 0000000000000000 RDI: ffff880074478010 [ 228.064539] RBP: ffff880074617de0 R08: 0000000000000000 R09: 0000000000000012 [ 228.064539] R10: 0000000000000001 R11: ffffffffffffffec R12: ffffea0001d11a00 [ 228.064539] R13: ffff88007f401400 R14: ffff88007446f800 R15: ffff880074617d50 [ 228.064539] FS: 0000000000000000(0000) GS:ffff88007f800000(0000) knlGS:0000000000000000 [ 228.064539] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 228.064539] CR2: 00007fe9ac6ec000 CR3: 000000007a5d6000 CR4: 00000000000006f0 [ 228.064539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 228.064539] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 228.064539] Stack: [ 228.064539] ffff880074617e28 ffffffffa01ab7db ffff880074617df0 ffff880074617df0 [ 228.064539] ffff880079273000 ffffffff81cc26c0 ffffffff81cc26c0 0000000000000000 [ 228.064539] 0000000000000000 ffff880074617e48 ffffffffa01840b8 ffffffff81cc26c0 [ 228.064539] Call Trace: [ 228.064539] [<ffffffffa01ab7db>] nfs4_state_shutdown_net+0x18b/0x220 [nfsd] [ 228.064539] [<ffffffffa01840b8>] nfsd_shutdown_net+0x38/0x70 [nfsd] [ 228.064539] [<ffffffffa018413e>] nfsd_last_thread+0x4e/0x80 [nfsd] [ 228.064539] [<ffffffffa00aa1eb>] svc_shutdown_net+0x2b/0x30 [sunrpc] [ 228.064539] [<ffffffffa018464b>] nfsd_destroy+0x5b/0x80 [nfsd] [ 228.064539] [<ffffffffa0184773>] nfsd+0x103/0x130 [nfsd] [ 228.064539] [<ffffffffa0184670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 228.064539] [<ffffffff810a8232>] kthread+0xd2/0xf0 [ 228.064539] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 228.064539] [<ffffffff816c493c>] ret_from_fork+0x7c/0xb0 [ 228.064539] [<ffffffff810a8160>] ? insert_kthread_work+0x40/0x40 [ 228.064539] Code: 1f 44 00 00 55 48 8b 17 48 89 e5 48 39 d7 74 3b 48 8b 47 08 48 85 c0 75 0e eb 25 66 0f 1f 84 00 00 00 00 00 48 89 d0 48 8b 50 10 <48> 85 d2 75 f4 5d c3 66 90 48 3b 78 08 75 f6 48 8b 10 48 89 c7 Fixes: ac55fdc (nfsd: move the confirmed and unconfirmed hlists...) Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

[ Upstream commit 5a008ff ] The MC8305 module got an additional entry added based solely on information from a Windows driver *.inf file. We now have the actual descriptor layout from one of these modules, and it consists of two alternate configurations where cfg #1 is a normal Gobi 2k layout and cfg #2 is MBIM only, using interface numbers 5 and 6 for MBIM control and data. The extra Windows driver entry for interface number 5 was most likely a bug. Deleting the bogus entry to avoid unnecessary qmi_wwan probe failures when using the MBIM configuration. Reported-by: Lana Black <sickmind@lavabit.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

dsd added a commit that referenced this pull request Apr 7, 2014

Merge pull request #2 from sjoerd-ccu/endless

70a588b

[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu...

dsd merged commit 70a588b into dsd:endless Apr 7, 2014

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu... #2

[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu... #2

sjoerd-ccu commented Apr 7, 2014

[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu... #2

[media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer qu... #2

Conversation

sjoerd-ccu commented Apr 7, 2014