we don't need +18dB Record Path Digital Gain here #61

voodik · 2014-08-30T21:19:33Z

Reduced "Record Path Digital Gain" to 0dB and this fixed high microphone noise on U3.

tobetter · 2014-09-03T04:29:48Z

Hi voodik,

Thank you for your valuable patch, I had tested and saw that MIC noise is reduced on Android. Your patch would be merged soon, but kindly recommend you to add a comment to specify particular dB upon your change.

we don't need +18dB Record Path Digital Gain here

commit a585f87 upstream. The scenario here is that someone calls enable_irq_wake() from somewhere in the code. This will result in the lockdep producing a backtrace as can be seen below. In my case, this problem is triggered when using the wl1271 (TI WlCore) driver found in drivers/net/wireless/ti/ . The problem cause is rather obvious from the backtrace, but let's outline the dependency. enable_irq_wake() grabs the IRQ buslock in irq_set_irq_wake(), which in turns calls mxs_gpio_set_wake_irq() . But mxs_gpio_set_wake_irq() calls enable_irq_wake() again on the one-level-higher IRQ , thus it tries to grab the IRQ buslock again in irq_set_irq_wake() . Because the spinlock in irq_set_irq_wake()->irq_get_desc_buslock()->__irq_get_desc_lock() is not marked as recursive, lockdep will spew the stuff below. We know we can safely re-enter the lock, so use IRQ_GC_INIT_NESTED_LOCK to fix the spew. ============================================= [ INFO: possible recursive locking detected ] 3.10.33-00012-gf06b763-dirty hardkernel#61 Not tainted --------------------------------------------- kworker/0:1/18 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/0:1/18: #0: (events){.+.+.+}, at: [<c0036308>] process_one_work+0x134/0x4a4 #1: ((&fw_work->work)){+.+.+.}, at: [<c0036308>] process_one_work+0x134/0x4a4 #2: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 stack backtrace: CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 3.10.33-00012-gf06b763-dirty hardkernel#61 Workqueue: events request_firmware_work_func [<c0013eb4>] (unwind_backtrace+0x0/0xf0) from [<c0011c74>] (show_stack+0x10/0x14) [<c0011c74>] (show_stack+0x10/0x14) from [<c005bb08>] (__lock_acquire+0x140c/0x1a64) [<c005bb08>] (__lock_acquire+0x140c/0x1a64) from [<c005c6a8>] (lock_acquire+0x9c/0x104) [<c005c6a8>] (lock_acquire+0x9c/0x104) from [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) from [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) from [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) from [<c0068cf4>] (set_irq_wake_real+0x30/0x44) [<c0068cf4>] (set_irq_wake_real+0x30/0x44) from [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) from [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) from [<c02be5e8>] (request_firmware_work_func+0x38/0x58) [<c02be5e8>] (request_firmware_work_func+0x38/0x58) from [<c0036394>] (process_one_work+0x1c0/0x4a4) [<c0036394>] (process_one_work+0x1c0/0x4a4) from [<c0036a4c>] (worker_thread+0x138/0x394) [<c0036a4c>] (worker_thread+0x138/0x394) from [<c003cb74>] (kthread+0xa4/0xb0) [<c003cb74>] (kthread+0xa4/0xb0) from [<c000ee00>] (ret_from_fork+0x14/0x34) wlcore: loaded Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit a585f87 upstream. The scenario here is that someone calls enable_irq_wake() from somewhere in the code. This will result in the lockdep producing a backtrace as can be seen below. In my case, this problem is triggered when using the wl1271 (TI WlCore) driver found in drivers/net/wireless/ti/ . The problem cause is rather obvious from the backtrace, but let's outline the dependency. enable_irq_wake() grabs the IRQ buslock in irq_set_irq_wake(), which in turns calls mxs_gpio_set_wake_irq() . But mxs_gpio_set_wake_irq() calls enable_irq_wake() again on the one-level-higher IRQ , thus it tries to grab the IRQ buslock again in irq_set_irq_wake() . Because the spinlock in irq_set_irq_wake()->irq_get_desc_buslock()->__irq_get_desc_lock() is not marked as recursive, lockdep will spew the stuff below. We know we can safely re-enter the lock, so use IRQ_GC_INIT_NESTED_LOCK to fix the spew. ============================================= [ INFO: possible recursive locking detected ] 3.10.33-00012-gf06b763-dirty #61 Not tainted --------------------------------------------- kworker/0:1/18 is trying to acquire lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 but task is already holding lock: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/0:1/18: #0: (events){.+.+.+}, at: [<c0036308>] process_one_work+0x134/0x4a4 #1: ((&fw_work->work)){+.+.+.}, at: [<c0036308>] process_one_work+0x134/0x4a4 #2: (&irq_desc_lock_class){-.-...}, at: [<c00685f0>] __irq_get_desc_lock+0x48/0x88 stack backtrace: CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 3.10.33-00012-gf06b763-dirty #61 Workqueue: events request_firmware_work_func [<c0013eb4>] (unwind_backtrace+0x0/0xf0) from [<c0011c74>] (show_stack+0x10/0x14) [<c0011c74>] (show_stack+0x10/0x14) from [<c005bb08>] (__lock_acquire+0x140c/0x1a64) [<c005bb08>] (__lock_acquire+0x140c/0x1a64) from [<c005c6a8>] (lock_acquire+0x9c/0x104) [<c005c6a8>] (lock_acquire+0x9c/0x104) from [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) [<c051d5a4>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) [<c00685f0>] (__irq_get_desc_lock+0x48/0x88) from [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) [<c0068e78>] (irq_set_irq_wake+0x20/0xf4) from [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) [<c027260c>] (mxs_gpio_set_wake_irq+0x1c/0x24) from [<c0068cf4>] (set_irq_wake_real+0x30/0x44) [<c0068cf4>] (set_irq_wake_real+0x30/0x44) from [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) [<c0068ee4>] (irq_set_irq_wake+0x8c/0xf4) from [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) [<c0310748>] (wlcore_nvs_cb+0x10c/0x97c) from [<c02be5e8>] (request_firmware_work_func+0x38/0x58) [<c02be5e8>] (request_firmware_work_func+0x38/0x58) from [<c0036394>] (process_one_work+0x1c0/0x4a4) [<c0036394>] (process_one_work+0x1c0/0x4a4) from [<c0036a4c>] (worker_thread+0x138/0x394) [<c0036a4c>] (worker_thread+0x138/0x394) from [<c003cb74>] (kthread+0xa4/0xb0) [<c003cb74>] (kthread+0xa4/0xb0) from [<c000ee00>] (ret_from_fork+0x14/0x34) wlcore: loaded Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 147b36d upstream. Race condition between registering an I2C device driver and deregistering an I2C adapter device which is assumed to manage that I2C device may lead to a NULL pointer dereference due to the uninitialized list head of driver clients. The root cause of the issue is that the I2C bus may know about the registered device driver and thus it is matched by bus_for_each_drv(), but the list of clients is not initialized and commonly it is NULL, because I2C device drivers define struct i2c_driver as static and clients field is expected to be initialized by I2C core: i2c_register_driver() i2c_del_adapter() driver_register() ... bus_add_driver() ... ... bus_for_each_drv(..., __process_removed_adapter) ... i2c_do_del_adapter() ... list_for_each_entry_safe(..., &driver->clients, ...) INIT_LIST_HEAD(&driver->clients); To solve the problem it is sufficient to do clients list head initialization before calling driver_register(). The problem was found while using an I2C device driver with a sluggish registration routine on a bus provided by a physically detachable I2C master controller, but practically the oops may be reproduced under the race between arbitraty I2C device driver registration and managing I2C bus device removal e.g. by unbinding the latter over sysfs: % echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 17 [hardkernel#1] SMP ARM CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ hardkernel#61 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: e5ada400 task.stack: e4936000 PC is at i2c_do_del_adapter+0x20/0xcc LR is at __process_removed_adapter+0x14/0x1c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 35bd004a DAC: 00000051 Process sh (pid: 533, stack limit = 0xe4936210) Stack: (0xe4937d28 to 0xe4938000) Backtrace: [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c) [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0) [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284) [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx]) [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44) [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c) [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34) [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104) [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34) [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54) [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214) [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120) [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170) [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8) [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 147b36d upstream. Race condition between registering an I2C device driver and deregistering an I2C adapter device which is assumed to manage that I2C device may lead to a NULL pointer dereference due to the uninitialized list head of driver clients. The root cause of the issue is that the I2C bus may know about the registered device driver and thus it is matched by bus_for_each_drv(), but the list of clients is not initialized and commonly it is NULL, because I2C device drivers define struct i2c_driver as static and clients field is expected to be initialized by I2C core: i2c_register_driver() i2c_del_adapter() driver_register() ... bus_add_driver() ... ... bus_for_each_drv(..., __process_removed_adapter) ... i2c_do_del_adapter() ... list_for_each_entry_safe(..., &driver->clients, ...) INIT_LIST_HEAD(&driver->clients); To solve the problem it is sufficient to do clients list head initialization before calling driver_register(). The problem was found while using an I2C device driver with a sluggish registration routine on a bus provided by a physically detachable I2C master controller, but practically the oops may be reproduced under the race between arbitraty I2C device driver registration and managing I2C bus device removal e.g. by unbinding the latter over sysfs: % echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 17 [hardkernel#1] SMP ARM CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ hardkernel#61 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: e5ada400 task.stack: e4936000 PC is at i2c_do_del_adapter+0x20/0xcc LR is at __process_removed_adapter+0x14/0x1c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 35bd004a DAC: 00000051 Process sh (pid: 533, stack limit = 0xe4936210) Stack: (0xe4937d28 to 0xe4938000) Backtrace: [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c) [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0) [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284) [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx]) [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44) [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c) [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34) [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104) [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34) [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54) [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214) [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120) [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170) [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8) [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Willy Tarreau <w@1wt.eu>

commit 3f802b1 upstream. The command number is not bounds checked against the command mask before it is shifted, resulting in an ubsan hit. This does not cause malfunction since the command number is eventually bounds checked, but we can make this ubsan clean by moving the bounds check to before the mask check. ================================================================================ UBSAN: Undefined behaviour in drivers/infiniband/core/uverbs_main.c:647:21 shift exponent 207 is too large for 64-bit type 'long long unsigned int' CPU: 0 PID: 446 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #61 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 __ubsan_handle_shift_out_of_bounds+0x293/0x2f7 ? debug_check_no_locks_freed+0x340/0x340 ? __ubsan_handle_load_invalid_value+0x19b/0x19b ? lock_acquire+0x440/0x440 ? lock_acquire+0x19d/0x440 ? __might_fault+0xf4/0x240 ? ib_uverbs_write+0x68d/0xe20 ib_uverbs_write+0x68d/0xe20 ? __lock_acquire+0xcf7/0x3940 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? sched_clock_cpu+0x18/0x200 ? sched_clock_cpu+0x18/0x200 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? __fget+0x35b/0x5d0 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x448e29 RSP: 002b:00007f033f567c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f033f5686bc RCX: 0000000000448e29 RDX: 0000000000000060 RSI: 0000000020001000 RDI: 0000000000000012 RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000056a0 R14: 00000000006e8740 R15: 0000000000000000 ================================================================================ Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.5 Fixes: 2dbd518 ("IB/core: IB/core: Allow legacy verbs through extended interfaces") Reported-by: Noa Osherovich <noaos@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 47ab154 upstream. After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by: Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.16: - Drop inapplicable changes in mixer quirk functions - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

…y section commit 8068df3 upstream. When we remove an early section, we don't free the usage map, as the usage maps of other sections are placed into the same page. Once the section is removed, it is no longer an early section (especially, the memmap is freed). When we re-add that section, the usage map is reused, however, it is no longer an early section. When removing that section again, we try to kfree() a usage map that was allocated during early boot - bad. Let's check against PageReserved() to see if we are dealing with an usage map that was allocated during boot. We could also check against !(PageSlab(usage_page) || PageCompound(usage_page)), but PageReserved() is cleaner. Can be triggered using memtrace under ppc64/powernv: $ mount -t debugfs none /sys/kernel/debug/ $ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable $ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable ------------[ cut here ]------------ kernel BUG at mm/slub.c:3969! Oops: Exception in kernel mode, sig: 5 [hardkernel#1] LE PAGE_SIZE=3D64K MMU=3DHash SMP NR_CPUS=3D2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 154 Comm: sh Not tainted 5.5.0-rc2-next-20191216-00005-g0be1dba7b7c0 hardkernel#61 NIP kfree+0x338/0x3b0 LR section_deactivate+0x138/0x200 Call Trace: section_deactivate+0x138/0x200 __remove_pages+0x114/0x150 arch_remove_memory+0x3c/0x160 try_remove_memory+0x114/0x1a0 __remove_memory+0x20/0x40 memtrace_enable_set+0x254/0x850 simple_attr_write+0x138/0x160 full_proxy_write+0x8c/0x110 __vfs_write+0x38/0x70 vfs_write+0x11c/0x2a0 ksys_write+0x84/0x140 system_call+0x5c/0x68 ---[ end trace 4b053cbd84e0db62 ]--- The first invocation will offline+remove memory blocks. The second invocation will first add+online them again, in order to offline+remove them again (usually we are lucky and the exact same memory blocks will get "reallocated"). Tested on powernv with boot memory: The usage map will not get freed. Tested on x86-64 with DIMMs: The usage map will get freed. Using Dynamic Memory under a Power DLAPR can trigger it easily. Triggering removal (I assume after previously removed+re-added) of memory from the HMC GUI can crash the kernel with the same call trace and is fixed by this patch. Link: http://lkml.kernel.org/r/20191217104637.5509-1-david@redhat.com Fixes: 326e1b8 ("mm/sparsemem: introduce a SECTION_IS_EARLY flag") Signed-off-by: David Hildenbrand <david@redhat.com> Tested-by: Pingfan Liu <piliu@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 76d588d upstream. Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event. Command to trigger the warning: # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5 Performance counter stats for 'sleep 5': 0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ 5.002117947 seconds time elapsed 0.000131000 seconds user 0.001063000 seconds sys Below is snippet of the warning in dmesg: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec preempt_count: 2, expected: 0 4 locks held by perf-exec/2869: #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90 #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0 #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510 #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510 irq event stamp: 4806 hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510 softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV Call Trace: dump_stack_lvl+0x98/0xe0 (unreliable) __might_resched+0x2f8/0x310 __mutex_lock+0x6c/0x13f0 thread_imc_event_add+0xf4/0x1b0 event_sched_in+0xe0/0x210 merge_sched_in+0x1f0/0x600 visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0 ctx_flexible_sched_in+0xcc/0x140 ctx_sched_in+0x20c/0x2a0 ctx_resched+0x104/0x1c0 perf_event_exec+0x340/0x510 begin_new_exec+0x730/0xef0 load_elf_binary+0x3f8/0x1e10 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0 WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0 CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670 REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2) MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000 CFAR: c00000000013fb64 IRQMASK: 1 The above warning triggered because the current imc-pmu code uses mutex lock in interrupt disabled sections. The function mutex_lock() internally calls __might_resched(), which will check if IRQs are disabled and in case IRQs are disabled, it will trigger the warning. Fix the issue by changing the mutex lock to spinlock. Fixes: 8f95faa ("powerpc/powernv: Detect and create IMC device") Reported-by: Michael Petlan <mpetlan@redhat.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> [mpe: Fix comments, trim oops in change log, add reported-by tags] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

we don't need +18dB Record Path Digital Gain here

a4e6df8

tobetter added a commit that referenced this pull request Sep 4, 2014

Merge pull request #61 from voodik/odroid-3.0.y-android

f5ba49b

we don't need +18dB Record Path Digital Gain here

tobetter merged commit f5ba49b into hardkernel:odroid-3.0.y-android Sep 4, 2014

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

we don't need +18dB Record Path Digital Gain here #61

we don't need +18dB Record Path Digital Gain here #61

voodik commented Aug 30, 2014

tobetter commented Sep 3, 2014

we don't need +18dB Record Path Digital Gain here #61

we don't need +18dB Record Path Digital Gain here #61

Conversation

voodik commented Aug 30, 2014

tobetter commented Sep 3, 2014