Porting Ultrascale ZCU104 board

Makefile

@@ -134,7 +134,7 @@ verible:
 
 ## Generates the build folder in sw using CMake to build (compile and linking)
 ## @param PROJECT=<folder_name_of_the_project_to_be_built>
-## @param TARGET=sim(default),systemc,pynq-z2,nexys-a7-100t
+## @param TARGET=sim(default),systemc,pynq-z2,nexys-a7-100t,zcu104
 ## @param LINKER=on_chip(default),flash_load,flash_exec
 ## @param COMPILER=gcc(default), clang
 ## @param COMPILER_PREFIX=riscv32-unknown-(default)
@@ -223,7 +223,7 @@ app-simulate-all:
 ## @section Vivado
 
 ## Builds (synthesis and implementation) the bitstream for the FPGA version using Vivado
-## @param FPGA_BOARD=nexys-a7-100t,pynq-z2
+## @param FPGA_BOARD=nexys-a7-100t,pynq-z2,zcu104
 ## @param FUSESOC_FLAGS=--flag=<flagname>
 vivado-fpga:
 	$(FUSESOC) --cores-root . run --no-export --target=$(FPGA_BOARD) $(FUSESOC_FLAGS) --build openhwgroup.org:systems:core-v-mini-mcu ${FUSESOC_PARAM} 2>&1 | tee buildvivado.log

README.md

@@ -231,11 +231,11 @@ make app
 To run any other application, please use the following command with appropiate parameters:
 
 ```
-app PROJECT=<folder_name_of_the_project_to_be_built> TARGET=sim(default),systemc,pynq-z2,nexys-a7-100t LINKER=on_chip(default),flash_load,flash_exec COMPILER=gcc(default),clang COMPILER_PREFIX=riscv32-unknown-(default) ARCH=rv32imc(default),<any RISC-V ISA string supported by the CPU>
+app PROJECT=<folder_name_of_the_project_to_be_built> TARGET=sim(default),systemc,pynq-z2,nexys-a7-100t,zcu104 LINKER=on_chip(default),flash_load,flash_exec COMPILER=gcc(default),clang COMPILER_PREFIX=riscv32-unknown-(default) ARCH=rv32imc(default),<any RISC-V ISA string supported by the CPU>
 
 Params:
 - PROJECT (ex: <folder_name_of_the_project_to_be_built>, hello_world(default))
-- TARGET (ex: sim(default),pynq-z2)
+- TARGET (ex: sim(default),systemc,pynq-z2,nexys-a7-100t,zcu104)
 - LINKER (ex: on_chip(default),flash_load,flash_exec)
 - COMPILER (ex: gcc(default),clang)
 - COMPILER_PREFIX (ex: riscv32-unknown-(default))
@@ -545,7 +545,7 @@ This project offers two different X-HEEP implementetions on Xilinx FPGAs, called
 
 In this version, the X-HEEP architecture is implemented on the programmable logic (PL) side of the FPGA, and its input/output are connected to the available headers on the FPGA board.
 
-Two FPGA boards are supported: the Xilinx Pynq-z2 and Nexys-A7-100t.
+Two FPGA boards are supported: the Xilinx Pynq-z2, Nexys-A7-100t, Zynq Ultrascale+ ZCU104.
 
 Make sure you have the FPGA board files installed in your Vivado.
 
@@ -563,6 +563,12 @@ or
 make vivado-fpga FPGA_BOARD=nexys-a7-100t
 ```
 
+or
+
+```
+make vivado-fpga FPGA_BOARD=zcu104
+```
+
 or add the flag `use_bscane_xilinx` to use the native Xilinx scanchain:
 
 ```

core-v-mini-mcu.core

@@ -124,6 +124,11 @@ filesets:
     - hw/fpga/scripts/nexys/set_board.tcl: { file_type: tclSource }
     - hw/fpga/scripts/nexys/xilinx_generate_clk_wizard.tcl:  { file_type: tclSource }
 
+  ip-fpga-zcu104:
+    files:
+    - hw/fpga/scripts/zcu104/set_board.tcl: { file_type: tclSource }
+    - hw/fpga/scripts/zcu104/xilinx_generate_clk_wizard.tcl:  { file_type: tclSource }
+
   ip-asic:
     depend:
     - technology::prim_mytech
@@ -154,6 +159,11 @@ filesets:
     - hw/fpga/constraints/pynq-z2/constraints.xdc
     file_type: xdc
 
+  xdc-fpga-zcu104:
+    files:
+    - hw/fpga/constraints/zcu104/pin_assign.xdc
+    file_type: xdc
+
   netlist-fpga:
     files:
     - build/openhwgroup.org_systems_core-v-mini-mcu_0/nexys-a7-100t-vivado/core_v_mini_mcu_xiling_postsynth.v
@@ -279,6 +289,10 @@ parameters:
     datatype: bool
     paramtype: vlogdefine
     default: false
+  FPGA_ZCU104:
+    datatype: bool
+    paramtype: vlogdefine
+    default: false
   # Make the parameter known to FuseSoC to enable overrides from the
   # command line. If not overwritten, use the generic technology library.
   PRIM_DEFAULT_IMPL:
@@ -485,6 +499,28 @@ targets:
         part: xc7z020clg400-1
     toplevel: [xilinx_core_v_mini_mcu_wrapper]
 
+  zcu104:
+    <<: *default_target
+    default_tool: vivado
+    description: ZCU104 Evaluation Board
+    filesets_append:
+    - x_heep_system
+    - rtl-fpga
+    - ip-fpga-zcu104
+    - ip-fpga
+    - xdc-fpga-zcu104
+    parameters:
+    - COREV_PULP
+    - FPU
+    - X_EXT
+    - SYNTHESIS=true
+    - REMOVE_OBI_FIFO
+    - FPGA_ZCU104=true
+    tools:
+      vivado:
+        part: xczu7ev-ffvc1156-2-e
+    toplevel: [xilinx_core_v_mini_mcu_wrapper]
+
   asic_synthesis:
     <<: *default_target
     default_tool: design_compiler

hw/fpga/board_files/vendor/esl_epfl_zcu104_board_files.lock.hjson

@@ -0,0 +1,14 @@
+// Copyright lowRISC contributors.
+// Licensed under the Apache License, Version 2.0, see LICENSE for details.
+// SPDX-License-Identifier: Apache-2.0
+
+// This file is generated by the util/vendor script. Please do not modify it
+// manually.
+
+{
+  upstream:
+  {
+    url: https://github.com/esl-epfl/zcu104_board_files.git
+    rev: 53e4affbaeec73809304940be8f5351ae147227a
+  }
+}

hw/fpga/board_files/vendor/esl_epfl_zcu104_board_files.vendor.hjson

@@ -0,0 +1,16 @@
+// Copyright 2023 David Mallasén Quintana
+// Solderpad Hardware License, Version 2.1, see LICENSE.md for details.
+// SPDX-License-Identifier: Apache-2.0 WITH SHL-2.1
+{
+  name: "esl_epfl_zcu104_board_files",
+  target_dir: "esl_epfl_zcu104_board_files",
+
+  upstream: {
+    url: "https://github.com/esl-epfl/zcu104_board_files.git",
+    rev: "53e4affbaeec73809304940be8f5351ae147227a",
+  },
+
+  exclude_from_upstream: [
+    "README.md"
+  ]
+}