replaced original BLE_iBeacon.ino example with a known-good one

libraries/BLE/examples/BLE_iBeacon/BLE_iBeacon.ino

@@ -1,104 +1,138 @@
-/*
-   Based on Neil Kolban example for IDF: https://github.com/nkolban/esp32-snippets/blob/master/cpp_utils/tests/BLE%20Tests/SampleScan.cpp
-   Ported to Arduino ESP32 by pcbreflux
-*/
-
-
-/*
-   Create a BLE server that will send periodic iBeacon frames.
-   The design of creating the BLE server is:
-   1. Create a BLE Server
-   2. Create advertising data
-   3. Start advertising.
-   4. wait
-   5. Stop advertising.
-   6. deep sleep
-
-*/
-#include "sys/time.h"
-
-#include "BLEDevice.h"
-#include "BLEUtils.h"
-#include "BLEBeacon.h"
-#include "esp_sleep.h"
-
-#define GPIO_DEEP_SLEEP_DURATION     10  // sleep x seconds and then wake up
-RTC_DATA_ATTR static time_t last;        // remember last boot in RTC Memory
-RTC_DATA_ATTR static uint32_t bootcount; // remember number of boots in RTC Memory
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-uint8_t temprature_sens_read();
-//uint8_t g_phyFuns;
-
-#ifdef __cplusplus
-}
-#endif
-
-// See the following for generating UUIDs:
-// https://www.uuidgenerator.net/
-BLEAdvertising *pAdvertising;
-struct timeval now;
-
-#define BEACON_UUID           "8ec76ea3-6668-48da-9866-75be8bc86f4d" // UUID 1 128-Bit (may use linux tool uuidgen or random numbers via https://www.uuidgenerator.net/)
-
-void setBeacon() {
-
-  BLEBeacon oBeacon = BLEBeacon();
-  oBeacon.setManufacturerId(0x4C00); // fake Apple 0x004C LSB (ENDIAN_CHANGE_U16!)
-  oBeacon.setProximityUUID(BLEUUID(BEACON_UUID));
-  oBeacon.setMajor((bootcount & 0xFFFF0000) >> 16);
-  oBeacon.setMinor(bootcount&0xFFFF);
-  BLEAdvertisementData oAdvertisementData = BLEAdvertisementData();
-  BLEAdvertisementData oScanResponseData = BLEAdvertisementData();
-
-  oAdvertisementData.setFlags(0x04); // BR_EDR_NOT_SUPPORTED 0x04
-
-  std::string strServiceData = "";
-
-  strServiceData += (char)26;     // Len
-  strServiceData += (char)0xFF;   // Type
-  strServiceData += oBeacon.getData(); 
-  oAdvertisementData.addData(strServiceData);
-
-  pAdvertising->setAdvertisementData(oAdvertisementData);
-  pAdvertising->setScanResponseData(oScanResponseData);
-  pAdvertising->setAdvertisementType(ADV_TYPE_NONCONN_IND);
-
-}
-
-void setup() {
-
-
-  Serial.begin(115200);
-  gettimeofday(&now, NULL);
-
-  Serial.printf("start ESP32 %d\n",bootcount++);
-
-  Serial.printf("deep sleep (%lds since last reset, %lds since last boot)\n",now.tv_sec,now.tv_sec-last);
-
-  last = now.tv_sec;
-
-  // Create the BLE Device
-  BLEDevice::init("");
-
-  // Create the BLE Server
-  // BLEServer *pServer = BLEDevice::createServer(); // <-- no longer required to instantiate BLEServer, less flash and ram usage
-
-  pAdvertising = BLEDevice::getAdvertising();
-
-  setBeacon();
-   // Start advertising
-  pAdvertising->start();
-  Serial.println("Advertizing started...");
-  delay(100);
-  pAdvertising->stop();
-  Serial.printf("enter deep sleep\n");
-  esp_deep_sleep(1000000LL * GPIO_DEEP_SLEEP_DURATION);
-  Serial.printf("in deep sleep\n");
-}
-
-void loop() {
-}
+/*
+   Based on 31337Ghost's reference code from https://github.com/nkolban/esp32-snippets/issues/385#issuecomment-362535434
+   which is based on pcbreflux's Arduino ESP32 port of Neil Kolban's example for IDF: https://github.com/nkolban/esp32-snippets/blob/master/cpp_utils/tests/BLE%20Tests/SampleScan.cpp
+*/
+
+/*
+   Create a BLE server that will send periodic iBeacon frames.
+   The design of creating the BLE server is:
+   1. Create a BLE Server
+   2. Create advertising data
+   3. Start advertising.
+   4. wait
+   5. Stop advertising.
+*/
+#include <BLEDevice.h>
+#include <BLEServer.h>
+#include <BLEUtils.h>
+#include <BLE2902.h>
+#include <BLEBeacon.h>
+
+#define DEVICE_NAME            "ESP32"
+#define SERVICE_UUID           "7A0247E7-8E88-409B-A959-AB5092DDB03E"
+#define BEACON_UUID            "2D7A9F0C-E0E8-4CC9-A71B-A21DB2D034A1"
+#define BEACON_UUID_REV        "A134D0B2-1DA2-1BA7-C94C-E8E00C9F7A2D"
+#define CHARACTERISTIC_UUID    "82258BAA-DF72-47E8-99BC-B73D7ECD08A5"
+
+BLEServer *pServer;
+BLECharacteristic *pCharacteristic;
+bool deviceConnected = false;
+uint8_t value = 0;
+
+class MyServerCallbacks: public BLEServerCallbacks {
+    void onConnect(BLEServer* pServer) {
+      deviceConnected = true;
+      Serial.println("deviceConnected = true");
+    };
+
+    void onDisconnect(BLEServer* pServer) {
+      deviceConnected = false;
+      Serial.println("deviceConnected = false");
+
+      // Restart advertising to be visible and connectable again
+      BLEAdvertising* pAdvertising;
+      pAdvertising = pServer->getAdvertising();
+      pAdvertising->start();
+      Serial.println("iBeacon advertising restarted");
+    }
+};
+
+class MyCallbacks: public BLECharacteristicCallbacks {
+    void onWrite(BLECharacteristic *pCharacteristic) {
+      std::string rxValue = pCharacteristic->getValue();
+
+      if (rxValue.length() > 0) {
+        Serial.println("*********");
+        Serial.print("Received Value: ");
+        for (int i = 0; i < rxValue.length(); i++) {
+          Serial.print(rxValue[i]);
+        }
+        Serial.println();
+        Serial.println("*********");
+
+      }
+    }
+};
+
+
+void init_service() {
+  BLEAdvertising* pAdvertising;
+  pAdvertising = pServer->getAdvertising();
+  pAdvertising->stop();
+
+  // Create the BLE Service
+  BLEService *pService = pServer->createService(BLEUUID(SERVICE_UUID));
+
+  // Create a BLE Characteristic
+  pCharacteristic = pService->createCharacteristic(
+                      CHARACTERISTIC_UUID,
+                      BLECharacteristic::PROPERTY_READ   |
+                      BLECharacteristic::PROPERTY_WRITE  |
+                      BLECharacteristic::PROPERTY_NOTIFY
+                    );
+  pCharacteristic->setCallbacks(new MyCallbacks());
+  pCharacteristic->addDescriptor(new BLE2902());
+
+  pAdvertising->addServiceUUID(BLEUUID(SERVICE_UUID));
+
+  // Start the service
+  pService->start();
+
+  pAdvertising->start();
+}
+
+void init_beacon() {
+  BLEAdvertising* pAdvertising;
+  pAdvertising = pServer->getAdvertising();
+  pAdvertising->stop();
+  // iBeacon
+  BLEBeacon myBeacon;
+  myBeacon.setManufacturerId(0x4c00);
+  myBeacon.setMajor(5);
+  myBeacon.setMinor(88);
+  myBeacon.setSignalPower(0xc5);
+  myBeacon.setProximityUUID(BLEUUID(BEACON_UUID_REV));
+
+  BLEAdvertisementData advertisementData;
+  advertisementData.setFlags(0x1A);
+  advertisementData.setManufacturerData(myBeacon.getData());
+  pAdvertising->setAdvertisementData(advertisementData);
+
+  pAdvertising->start();
+}
+
+void setup() {
+  Serial.begin(115200);
+  Serial.println();
+  Serial.println("Initializing...");
+  Serial.flush();
+
+  BLEDevice::init(DEVICE_NAME);
+  pServer = BLEDevice::createServer();
+  pServer->setCallbacks(new MyServerCallbacks());
+
+  init_service();
+  init_beacon();
+
+  Serial.println("iBeacon + service defined and advertising!");
+}
+
+void loop() {
+  if (deviceConnected) {
+    Serial.printf("*** NOTIFY: %d ***\n", value);
+    pCharacteristic->setValue(&value, 1);
+    pCharacteristic->notify();
+    value++;
+  }
+  delay(2000);
+}