espressif · me-no-dev · Mar 11, 2024 · Mar 6, 2024 · Mar 6, 2024 · Mar 6, 2024
diff --git a/cores/esp32/USB.cpp b/cores/esp32/USB.cpp
@@ -48,7 +48,7 @@
 #define USB_WEBUSB_ENABLED false
 #endif
 #ifndef USB_WEBUSB_URL
-#define USB_WEBUSB_URL "https://espressif.github.io/arduino-esp32/webusb.html"
+#define USB_WEBUSB_URL "https://docs.espressif.com/projects/arduino-esp32/en/latest/_static/webusb.html"
 #endif
 
 #if CFG_TUD_DFU

diff --git a/docs/_static/webusb.html b/docs/_static/webusb.html
@@ -0,0 +1,128 @@
+<!-- Based on https://github.com/zephyrproject-rtos/zephyr/tree/main/samples/subsys/usb/webusb -->
+
+<!DOCTYPE html>
+<html lang="en">
+  <head>
+    <title>Espressif WebUSB Console Example</title>
+  </head>
+
+<body>
+  <script>
+    var serial = {};
+
+    (function() {
+      'use strict';
+
+      serial.getPorts = function() {
+        return navigator.usb.getDevices().then(devices => {
+          return devices.map(device => new serial.Port(device));
+        });
+      };
+
+      serial.requestPort = function() {
+        const filters = [
+          { 'vendorId': 0x10c4, 'productId': 0xea60 },
+          { 'vendorId': 0x303a, 'productId': 0x1001 },
+          { 'vendorId': 0x303a, 'productId': 0x0002 },
+        ];
+        return navigator.usb.requestDevice({ 'filters': filters }).then(
+          device => new serial.Port(device)
+        );
+      }
+
+      serial.Port = function(device) {
+        this.device_ = device;
+      };
+
+      serial.Port.prototype.connect = function() {
+        let readLoop = () => {
+          const {
+            endpointNumber
+          } = this.device_.configuration.interfaces[0].alternate.endpoints[0]
+          this.device_.transferIn(endpointNumber, 64).then(result => {
+            this.onReceive(result.data);
+            readLoop();
+          }, error => {
+            this.onReceiveError(error);
+          });
+        };
+
+        return this.device_.open()
+            .then(() => {
+              if (this.device_.configuration === null) {
+                return this.device_.selectConfiguration(1);
+              }
+            })
+            .then(() => this.device_.claimInterface(0))
+            .then(() => {
+              readLoop();
+            });
+      };
+
+      serial.Port.prototype.disconnect = function() {
+        return this.device_.close();
+      };
+
+      serial.Port.prototype.send = function(data) {
+        const {
+          endpointNumber
+        } = this.device_.configuration.interfaces[0].alternate.endpoints[1]
+        return this.device_.transferOut(endpointNumber, data);
+      };
+    })();
+
+    let port;
+
+    function connect() {
+      port.connect().then(() => {
+        port.onReceive = data => {
+          let textDecoder = new TextDecoder();
+          console.log("Received:", textDecoder.decode(data));
+          document.getElementById('output').value += textDecoder.decode(data);
+        }
+        port.onReceiveError = error => {
+          console.error(error);
+          document.querySelector("#connect").style = "visibility: initial";
+          port.disconnect();
+        };
+      });
+    }
+
+    function send(string) {
+      console.log("sending to serial:" + string.length);
+      if (string.length === 0)
+        return;
+      console.log("sending to serial: [" + string +"]\n");
+
+      let view = new TextEncoder('utf-8').encode(string);
+      console.log(view);
+      if (port) {
+        port.send(view);
+      }
+    };
+
+    window.onload = _ => {
+      document.querySelector("#connect").onclick = function() {
+        serial.requestPort().then(selectedPort => {
+          port = selectedPort;
+          this.style = "visibility: hidden";
+          connect();
+        });
+      }
+
+      document.querySelector("#submit").onclick = () => {
+        let source = document.querySelector("#input").value;
+        send(source);
+      }
+    }
+  </script>
+
+  <button id="connect" style="visibility: initial">Connect To ESP Device</button>
+  <br><br><label for="input">Sender: </label> <br>
+  <textarea id="input" rows="25" cols="80">Send to ESP Device</textarea>
+  <br><button id="submit">Send</button>
+  <br><br>
+  <label for="output">Receiver: </label> <br>
+  <textarea id="output" rows="25" cols="80"></textarea>
+</body>
+</html>
diff --git a/docs/en/api/usb.rst b/docs/en/api/usb.rst
@@ -303,7 +303,7 @@ This function is used to get the ``webUSBURL``.
 
     const char * webUSBURL(void);
 
-The default ``webUSBURL`` is: https://espressif.github.io/arduino-esp32/webusb.html
+The default ``webUSBURL`` is: https://docs.espressif.com/projects/arduino-esp32/en/latest/_static/webusb.html
 
 enableDFU
 ^^^^^^^^^

diff --git a/libraries/USB/examples/USBVendor/USBVendor.ino b/libraries/USB/examples/USBVendor/USBVendor.ino
@@ -164,7 +164,8 @@ void setup() {
 
   USB.onEvent(usbEventCallback);
   USB.webUSB(true);
-  USB.webUSBURL("http://localhost/webusb");
+  // Set the URL for your WebUSB landing page
+  USB.webUSBURL("https://docs.espressif.com/projects/arduino-esp32/en/latest/_static/webusb.html");
   USB.begin();
 }
 
@@ -176,9 +177,11 @@ void loop() {
     if (buttonState == LOW) {
       Serial.println("Button Pressed");
       Vendor.println("Button Pressed");
+      Vendor.flush(); //Without flushing the data will only be sent when the buffer is full (64 bytes)
     } else {
-      Vendor.println("Button Released");
       Serial.println("Button Released");
+      Vendor.println("Button Released");
+      Vendor.flush(); //Without flushing the data will only be sent when the buffer is full (64 bytes)
     }
     delay(100);
   }
@@ -188,6 +191,7 @@ void loop() {
     uint8_t b[l];
     l = Serial.read(b, l);
     Vendor.write(b, l);
+    Vendor.flush(); //Without flushing the data will only be sent when the buffer is full (64 bytes)
   }
 }
 #endif /* ARDUINO_USB_MODE */
diff --git a/libraries/USB/examples/USBVendor/index.html b/libraries/USB/examples/USBVendor/index.html
@@ -0,0 +1,133 @@
+<!-- Based on https://github.com/zephyrproject-rtos/zephyr/tree/main/samples/subsys/usb/webusb -->
+
+<!--
+  Example of WebUSB web page to communicate with a USB device.
+  This can be used as a starting point for your self-hosted WebUSB landing page.
+-->
+
+<!DOCTYPE html>
+<html lang="en">
+  <head>
+    <title>Espressif WebUSB Console Example</title>
+  </head>
+
+<body>
+  <script>
+    var serial = {};
+
+    (function() {
+      'use strict';
+
+      serial.getPorts = function() {
+        return navigator.usb.getDevices().then(devices => {
+          return devices.map(device => new serial.Port(device));
+        });
+      };
+
+      serial.requestPort = function() {
+        const filters = [
+          { 'vendorId': 0x10c4, 'productId': 0xea60 },
+          { 'vendorId': 0x303a, 'productId': 0x1001 },
+          { 'vendorId': 0x303a, 'productId': 0x0002 },
+        ];
+        return navigator.usb.requestDevice({ 'filters': filters }).then(
+          device => new serial.Port(device)
+        );
+      }
+
+      serial.Port = function(device) {
+        this.device_ = device;
+      };
+
+      serial.Port.prototype.connect = function() {
+        let readLoop = () => {
+          const {
+            endpointNumber
+          } = this.device_.configuration.interfaces[0].alternate.endpoints[0]
+          this.device_.transferIn(endpointNumber, 64).then(result => {
+            this.onReceive(result.data);
+            readLoop();
+          }, error => {
+            this.onReceiveError(error);
+          });
+        };
+
+        return this.device_.open()
+            .then(() => {
+              if (this.device_.configuration === null) {
+                return this.device_.selectConfiguration(1);
+              }
+            })
+            .then(() => this.device_.claimInterface(0))
+            .then(() => {
+              readLoop();
+            });
+      };
+
+      serial.Port.prototype.disconnect = function() {
+        return this.device_.close();
+      };
+
+      serial.Port.prototype.send = function(data) {
+        const {
+          endpointNumber
+        } = this.device_.configuration.interfaces[0].alternate.endpoints[1]
+        return this.device_.transferOut(endpointNumber, data);
+      };
+    })();
+
+    let port;
+
+    function connect() {
+      port.connect().then(() => {
+        port.onReceive = data => {
+          let textDecoder = new TextDecoder();
+          console.log("Received:", textDecoder.decode(data));
+          document.getElementById('output').value += textDecoder.decode(data);
+        }
+        port.onReceiveError = error => {
+          console.error(error);
+          document.querySelector("#connect").style = "visibility: initial";
+          port.disconnect();
+        };
+      });
+    }
+
+    function send(string) {
+      console.log("sending to serial:" + string.length);
+      if (string.length === 0)
+        return;
+      console.log("sending to serial: [" + string +"]\n");
+
+      let view = new TextEncoder('utf-8').encode(string);
+      console.log(view);
+      if (port) {
+        port.send(view);
+      }
+    };
+
+    window.onload = _ => {
+      document.querySelector("#connect").onclick = function() {
+        serial.requestPort().then(selectedPort => {
+          port = selectedPort;
+          this.style = "visibility: hidden";
+          connect();
+        });
+      }
+
+      document.querySelector("#submit").onclick = () => {
+        let source = document.querySelector("#input").value;
+        send(source);
+      }
+    }
+  </script>
+
+  <button id="connect" style="visibility: initial">Connect To ESP Device</button>
+  <br><br><label for="input">Sender: </label> <br>
+  <textarea id="input" rows="25" cols="80">Send to ESP Device</textarea>
+  <br><button id="submit">Send</button>
+  <br><br>
+  <label for="output">Receiver: </label> <br>
+  <textarea id="output" rows="25" cols="80"></textarea>
+</body>
+</html>
diff --git a/libraries/USB/src/USBVendor.cpp b/libraries/USB/src/USBVendor.cpp
@@ -212,7 +212,9 @@ size_t USBVendor::read(uint8_t *buffer, size_t size){
     return count;
 }
 
-void USBVendor::flush(void){}
+void USBVendor::flush(void){
+    tud_vendor_n_write_flush(itf);
+}
 
 #endif /* CONFIG_TINYUSB_VENDOR_ENABLED */
 #endif /* SOC_USB_OTG_SUPPORTED */
diff --git a/variants/esp32s2usb/pins_arduino.h b/variants/esp32s2usb/pins_arduino.h
@@ -10,7 +10,7 @@
 #define USB_PRODUCT 		"ESP32-S2-USB"
 #define USB_SERIAL 			"0"
 #define USB_WEBUSB_ENABLED	false
-#define USB_WEBUSB_URL 		"https://espressif.github.io/arduino-esp32/webusb.html"
+#define USB_WEBUSB_URL 		"https://docs.espressif.com/projects/arduino-esp32/en/latest/_static/webusb.html"
 
 // Default USB FirmwareMSC Settings
 #define USB_FW_MSC_VENDOR_ID 		"ESP32-S2" 		//max 8 chars