Backport cgroup method bal fix #13

htejun · 2024-03-19T16:02:37Z

No description provided.

Combine 32-bit and 64-bit is_branch_taken logic for SCALAR_VALUE registers. It makes it easier to see parallels between two domains (32-bit and 64-bit), and makes subsequent refactoring more straightforward. No functional changes. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231102033759.2541186-16-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Similarly to is_branch_taken()-related refactorings, start preparing reg_set_min_max() to handle more generic case of two non-const registers. Start with renaming arguments to accommodate later addition of second register as an input argument. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231102033759.2541186-17-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Change reg_set_min_max() to take FALSE/TRUE sets of two registers each, instead of assuming that we are always comparing to a constant. For now we still assume that right-hand side registers are constants (and make sure that's the case by swapping src/dst regs, if necessary), but subsequent patches will remove this limitation. reg_set_min_max() is now called unconditionally for any register comparison, so that might include pointer vs pointer. This makes it consistent with is_branch_taken() generality. But we currently only support adjustments based on SCALAR vs SCALAR comparisons, so reg_set_min_max() has to guard itself againts pointers. Taking two by two registers allows to further unify and simplify check_cond_jmp_op() logic. We utilize fake register for BPF_K conditional jump case, just like with is_branch_taken() part. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231102033759.2541186-18-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Andrii Nakryiko says: ==================== BPF register bounds logic and testing improvements This patch set adds a big set of manual and auto-generated test cases validating BPF verifier's register bounds tracking and deduction logic. See details in the last patch. We start with building a tester that validates existing <range> vs <scalar> verifier logic for range bounds. To make all this work, BPF verifier's logic needed a bunch of improvements to handle some cases that previously were not covered. This had no implications as to correctness of verifier logic, but it was incomplete enough to cause significant disagreements with alternative implementation of register bounds logic that tests in this patch set implement. So we need BPF verifier logic improvements to make all the tests pass. This is what we do in patches #3 through #9. The end goal of this work, though, is to extend BPF verifier range state tracking such as to allow to derive new range bounds when comparing non-const registers. There is some more investigative work required to investigate and fix existing potential issues with range tracking as part of ALU/ALU64 operations, so <range> x <range> part of v5 patch set ([0]) is dropped until these issues are sorted out. For now, we include preparatory refactorings and clean ups, that set up BPF verifier code base to extend the logic to <range> vs <range> logic in subsequent patch set. Patches #10-#16 perform preliminary refactorings without functionally changing anything. But they do clean up check_cond_jmp_op() logic and generalize a bunch of other pieces in is_branch_taken() logic. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=797178&state=* v5->v6: - dropped <range> vs <range> patches (original patches #18 through #23) to add more register range sanity checks and fix preexisting issues; - comments improvements, addressing other feedback on first 17 patches (Eduard, Alexei); v4->v5: - added entirety of verifier reg bounds tracking changes, now handling <range> vs <range> cases (Alexei); - added way more comments trying to explain why deductions added are correct, hopefully they are useful and clarify things a bit (Daniel, Shung-Hsi); - added two preliminary selftests fixes necessary for RELEASE=1 build to work again, it keeps breaking. v3->v4: - improvements to reg_bounds tester (progress report, split 32-bit and 64-bit ranges, fix various verbosity output issues, etc); v2->v3: - fix a subtle little-endianness assumption inside parge_reg_state() (CI); v1->v2: - fix compilation when building selftests with llvm-16 toolchain (CI). ==================== Link: https://lore.kernel.org/r/20231102033759.2541186-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When updating per-cpu map in map_percpu_stats test, patch_map_thread() only passes 4-bytes-sized value to bpf_map_update_elem(). The expected size of the value is 8 * num_possible_cpus(), so fix it by passing a value with enough-size for per-cpu map update. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231101032455.3808547-2-houtao@huaweicloud.com

Export map_update_retriable() to make it usable for other map_test cases. These cases may only need retry for specific errno, so add a new callback parameter to let map_update_retriable() decide whether or not the errno is retriable. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231101032455.3808547-3-houtao@huaweicloud.com

BPF CI failed due to map_percpu_stats_percpu_hash from time to time [1]. It seems that the failure reason is per-cpu bpf memory allocator may not be able to allocate per-cpu pointer successfully and it can not refill free llist timely, and bpf_map_update_elem() will return -ENOMEM. So mitigate the problem by retrying the update operation for non-preallocated per-cpu map. [1]: https://github.com/kernel-patches/bpf/actions/runs/6713177520/job/18244865326?pr=5909 Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231101032455.3808547-4-houtao@huaweicloud.com

Hou Tao says: ==================== List-Subscribe: <mailto:bpf+subscribe@vger.kernel.org> List-Unsubscribe: <mailto:bpf+unsubscribe@vger.kernel.org> MIME-Version: 1.0 X-CM-TRANSID: gCh0CgCHHt6+xEFlSpMJEg--.58519S4 X-Coremail-Antispam: 1UD129KBjvJXoW7Jr1UJrW3JFyUXw4rJrWxCrg_yoW8JrW5pF WrK3WrKrZ7tryaqw13tanrW3yrtrs5W3WjkF13tr4YvF1UJ34xKr48KF1jgrZxCrZYqr1a yay8tF1xWa1xZrUanT9S1TB71UUUUUUqnTZGkaVYY2UrUUUUjbIjqfuFe4nvWSU5nxnvy2 9KBjDU0xBIdaVrnRJUUUk2b4IE77IF4wAFF20E14v26r4j6ryUM7CY07I20VC2zVCF04k2 6cxKx2IYs7xG6rWj6s0DM7CIcVAFz4kK6r1j6r18M28lY4IEw2IIxxk0rwA2F7IY1VAKz4 vEj48ve4kI8wA2z4x0Y4vE2Ix0cI8IcVAFwI0_tr0E3s1l84ACjcxK6xIIjxv20xvEc7Cj xVAFwI0_Gr1j6F4UJwA2z4x0Y4vEx4A2jsIE14v26rxl6s0DM28EF7xvwVC2z280aVCY1x 0267AKxVW0oVCq3wAS0I0E0xvYzxvE52x082IY62kv0487Mc02F40EFcxC0VAKzVAqx4xG 6I80ewAv7VC0I7IYx2IY67AKxVWUJVWUGwAv7VC2z280aVAFwI0_Jr0_Gr1lOx8S6xCaFV Cjc4AY6r1j6r4UM4x0Y48IcxkI7VAKI48JM4IIrI8v6xkF7I0E8cxan2IY04v7MxAIw28I cxkI7VAKI48JMxC20s026xCaFVCjc4AY6r1j6r4UMI8I3I0E5I8CrVAFwI0_Jr0_Jr4lx2 IqxVCjr7xvwVAFwI0_JrI_JrWlx4CE17CEb7AF67AKxVWUtVW8ZwCIc40Y0x0EwIxGrwCI 42IY6xIIjxv20xvE14v26r1j6r1xMIIF0xvE2Ix0cI8IcVCY1x0267AKxVW8JVWxJwCI42 IY6xAIw20EY4v20xvaj40_WFyUJVCq3wCI42IY6I8E87Iv67AKxVWUJVW8JwCI42IY6I8E 87Iv6xkF7I0E14v26r4j6r4UJbIYCTnIWIevJa73UjIFyTuYvjxUrR6zUUUUU X-CM-SenderInfo: xkrx3t3r6k3tpzhluzxrxghudrp/ X-Patchwork-Delegate: bpf@iogearbox.net From: Hou Tao <houtao1@huawei.com> Hi, BPF CI failed due to map_percpu_stats_percpu_hash from time to time [1]. It seems that the failure reason is per-cpu bpf memory allocator may not be able to allocate per-cpu pointer successfully and it can not refill free llist timely, and bpf_map_update_elem() will return -ENOMEM. Patch #1 fixes the size of value passed to per-cpu map update API. The problem was found when fixing the ENOMEM problem, so also post it in this patchset. Patch #2 & #3 mitigates the ENOMEM problem by retrying the update operation for non-preallocated per-cpu map. Please see individual patches for more details. And comments are always welcome. Regards, Tao [1]: https://github.com/kernel-patches/bpf/actions/runs/6713177520/job/18244865326?pr=5909 ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Those configs are needed to be able to run VM somewhat consistently. For instance, ATM, s390x is missing the `CONFIG_VIRTIO_CONSOLE` which prevents s390x kernels built in CI to leverage qemu-guest-agent. By moving them to `config,vm`, we should have selftest kernels which are equal in term of VM functionalities when they include this file. The set of config unabled were picked using grep -h -E '(_9P|_VIRTIO)' config.x86_64 config | sort | uniq added to `config.vm` and then grep -vE '(_9P|_VIRTIO)' config.{x86_64,aarch64,s390x} as a side-effect, some config may have disappeared to the aarch64 and s390x kernels, but they should not be needed. CI will tell. Signed-off-by: Manu Bretelle <chantr4@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231031212717.4037892-1-chantr4@gmail.com

…ges.

With the recent Makefile refactor that puts all build artifacts into a build/ directory output, there was a regression in that Make would now always rebuild schedulers even if they were unchanged. This is happening because when Make looks at a target, it looks to see if that file exists. If it doesn't, it executes the target. There are a few targets that are improperly tracked: 1. We were taking a dependency on the sched.skel.h target (e.g. scx_simple.skel.h). In the old build system this was an actual file, but now it's just a target as the target name was never updated to point to the full path to the include file output. 2. The same goes for sched.bpf.o, which is a dependency of the skel file. 3. The scheduler itself, which now resides in build/bin. The first two we can fix by updating the targets to include the build directories. The latter we'll have to fix with some more complex Make magic, which we'll do in the subsequent commit. Signed-off-by: David Vernet <void@manifault.com>

Now that the scheduler binaries are written to the build/bin/ directory, Make gets confused because it doesn't see the binary file in the same directory anymore and tries to rebuild it. This makes things kind of tricky, because make will always execute the recipe for the target, which is to compile it. We could add a layer of indirection by instead having the base scheduler target be empty, and just take a dependency on the actual binary that's created the compiler. This patch does that, and also cleans up the build to avoid copy-pasted scheduler recipes. Signed-off-by: David Vernet <void@manifault.com>

scx_rusty currently defines several build targets and recipes that would have to be duplicated by any other rust scheduler we may add. Let's add some build scaffolding to avoid people having to copy paste. Note that we can't fully avoid running any make logic if we take the same approach as with the C schedulers. The C schedulers add a layer of indirection where the "base" target (e.g. scx_simple) do nothing but take a dependency on the binary output file. This doesn't work with rust schedulers, because we're relying on Cargo to tell us when it needs to be rebuilt. Signed-off-by: David Vernet <void@manifault.com>

bpftool's man page lists "program" as one of possible values for OBJECT, while in fact bpftool accepts "prog" instead. Reported-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20231103081126.170034-1-asavkov@redhat.com

Fix Makefile dependency tracking

…on.bpf.h

Misc example scheduler cleanups

scx_task_iter_next_filtered() is used to iterate all non-idle tasks in the init and exit paths. Idle tasks are determined using is_idle_task(). Unfortunately, cff9b23 ("kernel/sched: Modify initial boot task idle setup") changed idle task initialization so that %PF_IDLE is set during CPU startup. So, CPUs that are not brought up during boot (such as CPUs which can never be online in some AMD processors) don't have the flag set and thus fails is_idle_task() test. This makes sched_ext incorrectly try to operate on idle tasks in init/exit paths leading to oopses. Fix it by directly testing p->sched_class against idle_sched_class.

Fix sched_ext crashes on v6.6

Building an arm64 kernel and seftests/bpf with defconfig + selftests/bpf/config and selftests/bpf/config.aarch64 the fragment CONFIG_DEBUG_INFO_REDUCED is enabled in arm64's defconfig, it should be disabled in file sefltests/bpf/config.aarch64 since if its not disabled CONFIG_DEBUG_INFO_BTF wont be enabled. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231103220912.333930-1-anders.roxell@linaro.org

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 gregkh#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 gregkh#2 [ffff800084a2f880] schedule at ffff800040bfa4b4 gregkh#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 gregkh#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc gregkh#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 gregkh#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 gregkh#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 gregkh#8 [ffff800084a2fa60] generic_make_request at ffff800040570138 gregkh#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 gregkh#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] gregkh#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] gregkh#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] gregkh#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] gregkh#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] gregkh#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] gregkh#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 gregkh#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc gregkh#18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

[ Upstream commit 9779d45 ] The function mbox_chan_received_data() calls the Rx callback of the mailbox client driver. The callback might set chan_in_use flag from pcc_send_data(). This flag's status determines whether the PCC channel is in use. However, there is a potential race condition where chan_in_use is updated incorrectly due to concurrency between the interrupt handler (pcc_mbox_irq()) and the command sender(pcc_send_data()). The 'chan_in_use' flag of a channel is set to true after sending a command. And the flag of the new command may be cleared erroneous by the interrupt handler afer mbox_chan_received_data() returns, As a result, the interrupt being level triggered can't be cleared in pcc_mbox_irq() and it will be disabled after the number of handled times exceeds the specified value. The error log is as follows: | kunpeng_hccs HISI04B2:00: PCC command executed timeout! | kunpeng_hccs HISI04B2:00: get port link status info failed, ret = -110 | irq 13: nobody cared (try booting with the "irqpoll" option) | Call trace: | dump_backtrace+0x0/0x210 | show_stack+0x1c/0x2c | dump_stack+0xec/0x130 | __report_bad_irq+0x50/0x190 | note_interrupt+0x1e4/0x260 | handle_irq_event+0x144/0x17c | handle_fasteoi_irq+0xd0/0x240 | __handle_domain_irq+0x80/0xf0 | gic_handle_irq+0x74/0x2d0 | el1_irq+0xbc/0x140 | mnt_clone_write+0x0/0x70 | file_update_time+0xcc/0x160 | fault_dirty_shared_page+0xe8/0x150 | do_shared_fault+0x80/0x1d0 | do_fault+0x118/0x1a4 | handle_pte_fault+0x154/0x230 | __handle_mm_fault+0x1ac/0x390 | handle_mm_fault+0xf0/0x250 | do_page_fault+0x184/0x454 | do_translation_fault+0xac/0xd4 | do_mem_abort+0x44/0xb4 | el0_da+0x40/0x74 | el0_sync_handler+0x60/0xb4 | el0_sync+0x168/0x180 | handlers: | pcc_mbox_irq | Disabling IRQ gregkh#13 To solve this issue, pcc_mbox_irq() must clear 'chan_in_use' flag before the call to mbox_chan_received_data(). Tested-by: Adam Young <admiyo@os.amperecomputing.com> Tested-by: Robbie King <robbiek@xsightlabs.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> (sudeep.holla: Minor updates to the subject, commit message and comment) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 63de35a upstream. An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 gregkh#13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] <TASK> [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] </TASK> [ 65.923927] ---[ end trace ]--- Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9779d45 ] The function mbox_chan_received_data() calls the Rx callback of the mailbox client driver. The callback might set chan_in_use flag from pcc_send_data(). This flag's status determines whether the PCC channel is in use. However, there is a potential race condition where chan_in_use is updated incorrectly due to concurrency between the interrupt handler (pcc_mbox_irq()) and the command sender(pcc_send_data()). The 'chan_in_use' flag of a channel is set to true after sending a command. And the flag of the new command may be cleared erroneous by the interrupt handler afer mbox_chan_received_data() returns, As a result, the interrupt being level triggered can't be cleared in pcc_mbox_irq() and it will be disabled after the number of handled times exceeds the specified value. The error log is as follows: | kunpeng_hccs HISI04B2:00: PCC command executed timeout! | kunpeng_hccs HISI04B2:00: get port link status info failed, ret = -110 | irq 13: nobody cared (try booting with the "irqpoll" option) | Call trace: | dump_backtrace+0x0/0x210 | show_stack+0x1c/0x2c | dump_stack+0xec/0x130 | __report_bad_irq+0x50/0x190 | note_interrupt+0x1e4/0x260 | handle_irq_event+0x144/0x17c | handle_fasteoi_irq+0xd0/0x240 | __handle_domain_irq+0x80/0xf0 | gic_handle_irq+0x74/0x2d0 | el1_irq+0xbc/0x140 | mnt_clone_write+0x0/0x70 | file_update_time+0xcc/0x160 | fault_dirty_shared_page+0xe8/0x150 | do_shared_fault+0x80/0x1d0 | do_fault+0x118/0x1a4 | handle_pte_fault+0x154/0x230 | __handle_mm_fault+0x1ac/0x390 | handle_mm_fault+0xf0/0x250 | do_page_fault+0x184/0x454 | do_translation_fault+0xac/0xd4 | do_mem_abort+0x44/0xb4 | el0_da+0x40/0x74 | el0_sync_handler+0x60/0xb4 | el0_sync+0x168/0x180 | handlers: | pcc_mbox_irq | Disabling IRQ gregkh#13 To solve this issue, pcc_mbox_irq() must clear 'chan_in_use' flag before the call to mbox_chan_received_data(). Tested-by: Adam Young <admiyo@os.amperecomputing.com> Tested-by: Robbie King <robbiek@xsightlabs.com> Signed-off-by: Huisong Li <lihuisong@huawei.com> (sudeep.holla: Minor updates to the subject, commit message and comment) Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e gregkh#1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c gregkh#1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c gregkh#1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c gregkh#2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f gregkh#3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 gregkh#4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e gregkh#5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 gregkh#6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 gregkh#7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a gregkh#8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 gregkh#9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 gregkh#10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f gregkh#11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf gregkh#12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 gregkh#13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 gregkh#14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d gregkh#15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e gregkh#16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad gregkh#17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e gregkh#18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 gregkh#19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 gregkh#20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 gregkh#21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net Signed-off-by: Tamir Duberstein <tamird@gmail.com> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 gregkh#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 gregkh#2 [ffff800084a2f880] schedule at ffff800040bfa4b4 gregkh#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 gregkh#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc gregkh#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 gregkh#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 gregkh#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 gregkh#8 [ffff800084a2fa60] generic_make_request at ffff800040570138 gregkh#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 gregkh#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] gregkh#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] gregkh#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] gregkh#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] gregkh#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] gregkh#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] gregkh#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 gregkh#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc gregkh#18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 88f7f56 ] When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty gregkh#13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well. Cc: stable@vger.kernel.org Reported-by: syzbot+353d7b75658a95aa955a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=353d7b75658a95aa955a Fixes: e77aff5 ("binderfs: fix use-after-free in binder_devices") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250517170957.1317876-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c0a559 upstream. Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well. Cc: stable@vger.kernel.org Reported-by: syzbot+353d7b75658a95aa955a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=353d7b75658a95aa955a Fixes: e77aff5 ("binderfs: fix use-after-free in binder_devices") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250517170957.1317876-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4dde20b ] When the binary path is excessively long, the generated probe_name in libbpf exceeds the kernel's MAX_EVENT_NAME_LEN limit (64 bytes). This causes legacy uprobe event attachment to fail with error code -22. The fix reorders the fields to place the unique ID before the name. This ensures that even if truncation occurs via snprintf, the unique ID remains intact, preserving event name uniqueness. Additionally, explicit checks with MAX_EVENT_NAME_LEN are added to enforce length constraints. Before Fix: ./test_progs -t attach_probe/kprobe-long_name ...... libbpf: failed to add legacy kprobe event for 'bpf_testmod_looooooooooooooooooooooooooooooong_name+0x0': -EINVAL libbpf: prog 'handle_kprobe': failed to create kprobe 'bpf_testmod_looooooooooooooooooooooooooooooong_name+0x0' perf event: -EINVAL test_attach_kprobe_long_event_name:FAIL:attach_kprobe_long_event_name unexpected error: -22 test_attach_probe:PASS:uprobe_ref_ctr_cleanup 0 nsec #13/11 attach_probe/kprobe-long_name:FAIL #13 attach_probe:FAIL ./test_progs -t attach_probe/uprobe-long_name ...... libbpf: failed to add legacy uprobe event for /root/linux-bpf/bpf-next/tools/testing/selftests/bpf/test_progs:0x13efd9: -EINVAL libbpf: prog 'handle_uprobe': failed to create uprobe '/root/linux-bpf/bpf-next/tools/testing/selftests/bpf/test_progs:0x13efd9' perf event: -EINVAL test_attach_uprobe_long_event_name:FAIL:attach_uprobe_long_event_name unexpected error: -22 #13/10 attach_probe/uprobe-long_name:FAIL #13 attach_probe:FAIL After Fix: ./test_progs -t attach_probe/uprobe-long_name #13/10 attach_probe/uprobe-long_name:OK #13 attach_probe:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED ./test_progs -t attach_probe/kprobe-long_name #13/11 attach_probe/kprobe-long_name:OK #13 attach_probe:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Fixes: 46ed5fc ("libbpf: Refactor and simplify legacy kprobe code") Fixes: cc10623 ("libbpf: Add legacy uprobe attaching support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Feng Yang <yangfeng@kylinos.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20250417014848.59321-2-yangfeng59949@163.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eedf3e3 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net Signed-off-by: Tamir Duberstein <tamird@gmail.com> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

The OP-TEE driver registers the function notif_callback() for FF-A notifications. However, this function is called in an atomic context leading to errors like this when processing asynchronous notifications: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0-00019-g657536ebe0aa gregkh#13 | Hardware name: linux,dummy-virt (DT) | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | optee_get_msg_arg+0x7c/0x21c | simple_call_with_arg+0x50/0xc0 | optee_do_bottom_half+0x14/0x20 | notif_callback+0x3c/0x48 | handle_notif_callbacks+0x9c/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 Fix this by adding work queue to process the notification in a non-atomic context. Fixes: d0476a5 ("optee: ffa_abi: add asynchronous notifications") Cc: stable@vger.kernel.org Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250602120452.2507084-1-jens.wiklander@linaro.org Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>

commit 312d02a upstream. The OP-TEE driver registers the function notif_callback() for FF-A notifications. However, this function is called in an atomic context leading to errors like this when processing asynchronous notifications: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0-00019-g657536ebe0aa gregkh#13 | Hardware name: linux,dummy-virt (DT) | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | optee_get_msg_arg+0x7c/0x21c | simple_call_with_arg+0x50/0xc0 | optee_do_bottom_half+0x14/0x20 | notif_callback+0x3c/0x48 | handle_notif_callbacks+0x9c/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 Fix this by adding work queue to process the notification in a non-atomic context. Fixes: d0476a5 ("optee: ffa_abi: add asynchronous notifications") Cc: stable@vger.kernel.org Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250602120452.2507084-1-jens.wiklander@linaro.org Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The commit 86bc882 ("staging: vchiq_arm: Create keep-alive thread during probe") introduced a regression for certain configurations, which doesn't have a VCHIQ user. This results in a unused and hanging keep-alive thread: INFO: task vchiq-keep/0:85 blocked for more than 120 seconds. Not tainted 6.12.34-v8-+ gregkh#13 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:vchiq-keep/0 state:D stack:0 pid:85 tgid:85 ppid:2 Call trace: __switch_to+0x188/0x230 __schedule+0xa54/0xb28 schedule+0x80/0x120 schedule_preempt_disabled+0x30/0x50 kthread+0xd4/0x1a0 ret_from_fork+0x10/0x20 Fixes: 86bc882 ("staging: vchiq_arm: Create keep-alive thread during probe") Reported-by: Maíra Canal <mcanal@igalia.com> Closes: https://lore.kernel.org/linux-staging/ba35b960-a981-4671-9f7f-060da10feaa1@usp.br/ Cc: stable@kernel.org Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20250715161108.3411-3-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 228af5a upstream. The commit 86bc882 ("staging: vchiq_arm: Create keep-alive thread during probe") introduced a regression for certain configurations, which doesn't have a VCHIQ user. This results in a unused and hanging keep-alive thread: INFO: task vchiq-keep/0:85 blocked for more than 120 seconds. Not tainted 6.12.34-v8-+ #13 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:vchiq-keep/0 state:D stack:0 pid:85 tgid:85 ppid:2 Call trace: __switch_to+0x188/0x230 __schedule+0xa54/0xb28 schedule+0x80/0x120 schedule_preempt_disabled+0x30/0x50 kthread+0xd4/0x1a0 ret_from_fork+0x10/0x20 Fixes: 86bc882 ("staging: vchiq_arm: Create keep-alive thread during probe") Reported-by: Maíra Canal <mcanal@igalia.com> Closes: https://lore.kernel.org/linux-staging/ba35b960-a981-4671-9f7f-060da10feaa1@usp.br/ Cc: stable@kernel.org Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Link: https://lore.kernel.org/r/20250715161108.3411-3-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Without the change `perf `hangs up on charaster devices. On my system it's enough to run system-wide sampler for a few seconds to get the hangup: $ perf record -a -g --call-graph=dwarf $ perf report # hung `strace` shows that hangup happens on reading on a character device `/dev/dri/renderD128` $ strace -y -f -p 2780484 strace: Process 2780484 attached pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached It's call trace descends into `elfutils`: $ gdb -p 2780484 (gdb) bt #0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0) at ../sysdeps/unix/sysv/linux/pread64.c:25 gregkh#1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1 gregkh#2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0) at util/dso.h:537 gregkh#6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114 gregkh#7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242 gregkh#8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 gregkh#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0, thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127, best_effort=best_effort@entry=false) at util/thread.h:152 gregkh#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939 gregkh#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2920 gregkh#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440, sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true) at util/machine.c:2970 gregkh#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440, sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198 gregkh#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0, evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127 gregkh#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127, arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255 gregkh#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540, evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334 gregkh#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0, file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367 gregkh#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245 #22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324 #23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224, file_path=0x105ffbf0 "perf.data") at util/session.c:1419 #24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0, --Type <RET> for more, q to quit, c to continue without paging-- quit prog=prog@entry=0x7fff9df81220) at util/session.c:2132 #25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220) at util/session.c:2181 #26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226 #27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390 #28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076 #29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827 #30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:351 #31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404 #32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448 #33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556 The hangup happens because nothing in` perf` or `elfutils` checks if a mapped file is easily readable. The change conservatively skips all non-regular files. Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Symbolize stack traces by creating a live machine. Add this functionality to dump_stack and switch dump_stack users to use it. Switch TUI to use it. Add stack traces to the child test function which can be useful to diagnose blocked code. Example output: ``` $ perf test -vv PERF_RECORD_ ... 7: PERF_RECORD_* events & perf_sample fields: 7: PERF_RECORD_* events & perf_sample fields : Running (1 active) ^C Signal (2) while running tests. Terminating tests with the same signal Internal test harness failure. Completing any started tests: : 7: PERF_RECORD_* events & perf_sample fields: ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 gregkh#1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 gregkh#2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 gregkh#3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 gregkh#4 0x7fc12fef1393 in __nanosleep nanosleep.c:26 gregkh#5 0x7fc12ff02d68 in __sleep sleep.c:55 gregkh#6 0x55788c63196b in test__PERF_RECORD perf-record.c:0 gregkh#7 0x55788c620fb0 in run_test_child builtin-test.c:0 gregkh#8 0x55788c5bd18d in start_command run-command.c:127 gregkh#9 0x55788c621ef3 in __cmd_test builtin-test.c:0 gregkh#10 0x55788c6225bf in cmd_test ??:0 gregkh#11 0x55788c5afbd0 in run_builtin perf.c:0 gregkh#12 0x55788c5afeeb in handle_internal_command perf.c:0 gregkh#13 0x55788c52b383 in main ??:0 gregkh#14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 gregkh#15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 gregkh#16 0x55788c52b9d1 in _start ??:0 ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 gregkh#1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 gregkh#2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45 gregkh#3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26 gregkh#4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36 gregkh#5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0 gregkh#6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 gregkh#7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 gregkh#8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 gregkh#9 0x7fc12fef1393 in __nanosleep nanosleep.c:26 gregkh#10 0x7fc12ff02d68 in __sleep sleep.c:55 gregkh#11 0x55788c63196b in test__PERF_RECORD perf-record.c:0 gregkh#12 0x55788c620fb0 in run_test_child builtin-test.c:0 gregkh#13 0x55788c5bd18d in start_command run-command.c:127 gregkh#14 0x55788c621ef3 in __cmd_test builtin-test.c:0 gregkh#15 0x55788c6225bf in cmd_test ??:0 gregkh#16 0x55788c5afbd0 in run_builtin perf.c:0 gregkh#17 0x55788c5afeeb in handle_internal_command perf.c:0 gregkh#18 0x55788c52b383 in main ??:0 gregkh#19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 gregkh#20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 gregkh#21 0x55788c52b9d1 in _start ??:0 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Calling perf top with branch filters enabled on Intel CPU's with branch counters logging (A.K.A LBR event logging [1]) support results in a segfault. $ perf top -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter ... Thread 27 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffafff76c0 (LWP 949003)] perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 653 *width = env->cpu_pmu_caps ? env->br_cntr_width : (gdb) bt #0 perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 gregkh#1 0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345 gregkh#2 0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389 gregkh#3 0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422 gregkh#4 0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850 gregkh#5 0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737 gregkh#6 0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359 gregkh#7 0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845 gregkh#8 0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211 gregkh#9 0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245 gregkh#10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324 gregkh#11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342 gregkh#12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120 gregkh#13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448 gregkh#14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78 The cause is that perf_env__find_br_cntr_info tries to access a null pointer pmu_caps in the perf_env struct. A similar issue exists for homogeneous core systems which use the cpu_pmu_caps structure. Fix this by populating cpu_pmu_caps and pmu_caps structures with values from sysfs when calling perf top with branch stack sampling enabled. [1], LBR event logging introduced here: https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/ Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

…CAN XL step 3/3" Vincent Mailhol <mailhol@kernel.org> says: In November last year, I sent an RFC to introduce CAN XL [1]. That RFC, despite positive feedback, was put on hold due to some unanswered question concerning the PWM encoding [2]. While stuck, some small preparation work was done in parallel in [3] by refactoring the struct can_priv and doing some trivial clean-up and renaming. Initially, [3] received zero feedback but was eventually merged after splitting it in smaller parts and resending it. Finally, in July this year, we clarified the remaining mysteries about PWM calculation, thus unlocking the series. Summer being a bit busy because of some personal matters brings us to now. After doing all the refactoring and adding all the CAN XL features, the final result is more than 30 patches, definitively too much for a single series. So I am splitting the remaining changes three: - can: rework the CAN MTU logic [4] - can: netlink: preparation before introduction of CAN XL (this series) - CAN XL (will come right after the two preparation series get merged) And thus, this series continues and finishes the preparation work done in [3] and [4]. It contains all the refactoring needed to smoothly introduce CAN XL. The goal is to: - split the functions in smaller pieces: CAN XL will introduce a fair amount of code. And some functions which are already fairly long (86 lines for can_validate(), 215 lines for can_changelink()) would grow to disproportionate sizes if the CAN XL logic were to be inlined in those functions. - repurpose the existing code to handle both CAN FD and CAN XL: a huge part of CAN XL simply reuses the CAN FD logic. All the existing CAN FD logic is made more generic to handle both CAN FD and XL. In more details: - Patch gregkh#1 moves struct data_bittiming_params from dev.h to bittiming.h and patch gregkh#2 makes can_get_relative_tdco() FD agnostic before also moving it to bittiming.h. - Patch gregkh#3 adds some comments to netlink.h tagging which IFLA symbols are FD specific. - Patches gregkh#4 to gregkh#6 are refactoring can_validate() and can_validate_bittiming(). - Patches gregkh#7 to gregkh#11 are refactoring can_changelink() and can_tdc_changelink(). - Patches gregkh#12 and gregkh#13 are refactoring can_get_size() and can_tdc_get_size(). - Patches gregkh#14 to gregkh#17 are refactoring can_fill_info() and can_tdc_fill_info(). - Patch gregkh#18 makes can_calc_tdco() FD agnostic. - Patch gregkh#19 adds can_get_ctrlmode_str() which converts control mode flags into strings. This is done in preparation of patch gregkh#20. - Patch gregkh#20 is the final patch and improves the user experience by providing detailed error messages whenever invalid parameters are provided. All those error messages came into handy when debugging the upcoming CAN XL patches. Aside from the last patch, the other changes do not impact any of the existing functionalities. The follow up series which introduces CAN XL is nearly completed but will be sent only once this one is approved: one thing at a time, I do not want to overwhelm people (including myself). [1] https://lore.kernel.org/linux-can/20241110155902.72807-16-mailhol.vincent@wanadoo.fr/ [2] https://lore.kernel.org/linux-can/c4771c16-c578-4a6d-baee-918fe276dbe9@wanadoo.fr/ [3] https://lore.kernel.org/linux-can/20241110155902.72807-16-mailhol.vincent@wanadoo.fr/ [4] https://lore.kernel.org/linux-can/20250923-can-fix-mtu-v2-0-984f9868db69@kernel.org/ Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-0-e720d28f66fe@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Petr Machata says: ==================== selftests: Mark auto-deferring functions clearly selftests/net/lib.sh contains a suite of iproute2 wrappers that automatically schedule the corresponding cleanup through defer. The fact they do so is however not immediately obvious, one needs to know which functions are handling the deferral behind the scenes, and which expect the caller to handle cleanups themselves. A convention for these auto-deferring functions would help both writing and patch review. This patchset does so by marking these functions with an adf_ prefix. We already have a few such functions: forwarding/lib.sh has adf_mcd_start() and a few selftests add private helpers that conform to this convention. Patches gregkh#1 to gregkh#8 gradually convert individual functions, one per patch. Patch gregkh#9 renames an auto-deferring private helpers named dfr_* to adf_*. The plan is not to retro-rename all private helpers, but I happened to know about this one. Patches gregkh#10 to gregkh#12 introduce several autodefer helpers for commonly used forwarding/lib.sh functions, and opportunistically convert straightforward instances of 'action; defer counteraction' to the new helpers. Patch gregkh#13 adds some README verbiage to pitch defer and the adf_* convention. ==================== Link: https://patch.msgid.link/cover.1758821127.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Patch series "mm: remove nth_page()", v2. As discussed recently with Linus, nth_page() is just nasty and we would like to remove it. To recap, the reason we currently need nth_page() within a folio is because on some kernel configs (SPARSEMEM without SPARSEMEM_VMEMMAP), the memmap is allocated per memory section. While buddy allocations cannot cross memory section boundaries, hugetlb and dax folios can. So crossing a memory section means that "page++" could do the wrong thing. Instead, nth_page() on these problematic configs always goes from page->pfn, to the go from (++pfn)->page, which is rather nasty. Likely, many people have no idea when nth_page() is required and when it might be dropped. We refer to such problematic PFN ranges and "non-contiguous pages". If we only deal with "contiguous pages", there is not need for nth_page(). Besides that "obvious" folio case, we might end up using nth_page() within CMA allocations (again, could span memory sections), and in one corner case (kfence) when processing memblock allocations (again, could span memory sections). So let's handle all that, add sanity checks, and remove nth_page(). Patch gregkh#1 -> gregkh#5 : stop making SPARSEMEM_VMEMMAP user-selectable + cleanups Patch gregkh#6 -> gregkh#13 : disallow folios to have non-contiguous pages Patch gregkh#14 -> gregkh#20 : remove nth_page() usage within folios Patch #22 : disallow CMA allocations of non-contiguous pages Patch #23 -> #33 : sanity+check + remove nth_page() usage within SG entry Patch #34 : sanity-check + remove nth_page() usage in unpin_user_page_range_dirty_lock() Patch #35 : remove nth_page() in kfence Patch #36 : adjust stale comment regarding nth_page Patch #37 : mm: remove nth_page() A lot of this is inspired from the discussion at [1] between Linus, Jason and me, so cudos to them. This patch (of 37): In an ideal world, we wouldn't have to deal with SPARSEMEM without SPARSEMEM_VMEMMAP, but in particular for 32bit SPARSEMEM_VMEMMAP is considered too costly and consequently not supported. However, if an architecture does support SPARSEMEM with SPARSEMEM_VMEMMAP, let's forbid the user to disable VMEMMAP: just like we already do for arm64, s390 and x86. So if SPARSEMEM_VMEMMAP is supported, don't allow to use SPARSEMEM without SPARSEMEM_VMEMMAP. This implies that the option to not use SPARSEMEM_VMEMMAP will now be gone for loongarch, powerpc, riscv and sparc. All architectures only enable SPARSEMEM_VMEMMAP with 64bit support, so there should not really be a big downside to using the VMEMMAP (quite the contrary). This is a preparation for not supporting (1) folio sizes that exceed a single memory section (2) CMA allocations of non-contiguous page ranges in SPARSEMEM without SPARSEMEM_VMEMMAP configs, whereby we want to limit possible impact as much as possible (e.g., gigantic hugetlb page allocations suddenly fails). Link: https://lkml.kernel.org/r/20250901150359.867252-1-david@redhat.com Link: https://lkml.kernel.org/r/20250901150359.867252-2-david@redhat.com Link: https://lore.kernel.org/all/CAHk-=wiCYfNp4AJLBORU-c7ZyRBUp66W2-Et6cdQ4REx-GyQ_A@mail.gmail.com/T/#u [1] Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Bart van Assche <bvanassche@acm.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Brendan Jackman <jackmanb@google.com> Cc: Brett Creeley <brett.creeley@amd.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter (Ampere) <cl@gentwo.org> Cc: Damien Le Maol <dlemoal@kernel.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ingo Molnar <mingo@redhat.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: James Bottomley <james.bottomley@HansenPartnership.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Maxim Levitky <maximlevitsky@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Niklas Cassel <cassel@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Robin Murohy <robin.murphy@arm.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Tvrtko Ursulin <tursulin@ursulin.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Cc: Yishai Hadas <yishaih@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

anakryiko and others added 30 commits November 2, 2023 08:59

ravg: Drop scx_ prefix and implement ravg_transfer(). Misc rusty chan…

cf37d0a

…ges.

scx_rusty: Implement task load transfers

7dc6a8b

Merge pull request #67 from sched-ext/make_deps

41728bb

Fix Makefile dependency tracking

scx_common: libbpf now has inline iter decls, drop them from scx_comm…

58e2a66

…on.bpf.h

scx_rusty: ravg WIP

a4fbd6f

scx_rusty: Switch to ravg dom loads

b24bc9b

scx_rusty: Drop unnnecessary read_volatiles from map elem access

d401cf1

scx_rusty: Elide reading task loads if LB isn't necessary

fbf0ccf

rusty: Fully switch to ravg

8895ddd

ravg: Fix ravg_transfer()

ca211c6

scx_rusty: Improve debug messages

8111b6e

scx_rusty: Minor cleanup

46f07fa

scx_rusty: Comments, parameterize ravg half life

f244d5e

Merge pull request #68 from sched-ext/scx-cleanups

d6a788a

Misc example scheduler cleanups

Merge pull request #73 from sched-ext/scx-fix-crash

21777bc

Fix sched_ext crashes on v6.6

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Backport cgroup method bal fix #13

Backport cgroup method bal fix #13

Uh oh!

htejun commented Mar 19, 2024

Uh oh!

Uh oh!

Backport cgroup method bal fix #13

Backport cgroup method bal fix #13

Uh oh!

Conversation

htejun commented Mar 19, 2024

Uh oh!

Uh oh!