-
Notifications
You must be signed in to change notification settings - Fork 35
OPX package operation
This information describes the standard Linux Debian distribution operation for the OPX package. See OPX commands for specific Linux management command information.
The default admin username is part of the Linux sudo
group for executing privilege commands. The default password is admin but you must change the password the first-time you log into the device. Before continuing, verify you have connected to the serial console on the device.
Debian GNU/Linux 9 OPX ttyS0
OPX login: admin
Password:
Linux OPX 4.9.110-opx #1 SMP Thu Nov 15 23:51:16 etc 2018 x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
admin@OPX:~$
The Management port name is eth0, and the Management interface is configured to automatically obtain its IP address using DHCP by default. You can change the behavior by modifying the /etc/network/interfaces
file with these parameters:
auto eth0
iface eth0
inet static address 10.11.133.40
netmask 255.255.0.0
gateway 10.11.133.254
After modifying the interfaces file, restart the networking service:
$ service networking restart
Use the service <servicename> status
command to check the status of the service. The command output indicates if the service is up and running or inactive. You can also use the systemctl
command to check the service status.
$ service snmpd status
snmpd.service - LSB: SNMP agents
Loaded: loaded (/etc/init.d/snmpd)
Active: active (running) since Fri 2018-11-18 02:16:06 UTC; 2h 39min ago
CGroup: /system.slice/snmpd.service
└─930 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -g snmp -I -smux ...
$ service snmpd stop
$ service snmpd status
snmpd.service - LSB: SNMP agents
Loaded: loaded (/etc/init.d/snmpd)
Active: inactive (dead) since Fri 2018-11-16 05:00:27 UTC; 3s ago
Process: 3370 ExecStop=/etc/init.d/snmpd stop (code=exited, status=0/SUCCESS)
$ service snmpd start
$ service snmpd status
snmpd.service - LSB: SNMP agents
Loaded: loaded (/etc/init.d/snmpd)
Active: active (running) since Wed 2016-02-17 05:00:39 UTC; 1s ago
Process: 3370 ExecStop=/etc/init.d/snmpd stop (code=exited, status=0/SUCCESS)
Process: 3395 ExecStart=/etc/init.d/snmpd start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/snmpd.service
└─3399 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -g snmp -I -smux...
$ service snmpd restart
$ service snmpd status
snmpd.service - LSB: SNMP agents
Loaded: loaded (/etc/init.d/snmpd)
Active: active (running) since Fri 2018-11-16 05:00:46 UTC; 1s ago
Process: 3407 ExecStop=/etc/init.d/snmpd stop (code=exited, status=0/SUCCESS)
Process: 3412 ExecStart=/etc/init.d/snmpd start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/snmpd.service
└─3416 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -g snmp -I -smux..
© 2019 OpenSwitch project. All information is contributed to and made available by OPX under the Creative Commons Attribution 4.0 International License (available at http://creativecommons.org/licenses/by/4.0/).
- Home
- System overview
- Software releases
- Hardware support
- FAQs
- Install
- Build
- Configure
- Develop
- Administer
- Troubleshoot
- Software compatibility
- Contribute
- DevOps
- Join