Linux 5.17.14 #152
Closed
Linux 5.17.14 #152
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit d98079c ] On Intel Icelake, topdown events must always be grouped with a slots event as leader. When a metric is parsed a weak group is formed and retried if perf_event_open fails. The retried events aren't grouped breaking the slots leader requirement. This change modifies the weak group "reset" behavior so that topdown events aren't broken from the group for the retry. $ perf stat -e '{slots,topdown-bad-spec,topdown-be-bound,topdown-fe-bound,topdown-retiring,branch-instructions,branch-misses,bus-cycles,cache-misses,cache-references,cpu-cycles,instructions,mem-loads,mem-stores,ref-cycles,baclears.any,ARITH.DIVIDER_ACTIVE}:W' -a sleep 1 Performance counter stats for 'system wide': 47,867,188,483 slots (92.27%) <not supported> topdown-bad-spec <not supported> topdown-be-bound <not supported> topdown-fe-bound <not supported> topdown-retiring 2,173,346,937 branch-instructions (92.27%) 10,540,253 branch-misses # 0.48% of all branches (92.29%) 96,291,140 bus-cycles (92.29%) 6,214,202 cache-misses # 20.120 % of all cache refs (92.29%) 30,886,082 cache-references (76.91%) 11,773,726,641 cpu-cycles (84.62%) 11,807,585,307 instructions # 1.00 insn per cycle (92.31%) 0 mem-loads (92.32%) 2,212,928,573 mem-stores (84.69%) 10,024,403,118 ref-cycles (92.35%) 16,232,978 baclears.any (92.35%) 23,832,633 ARITH.DIVIDER_ACTIVE (84.59%) 0.981070734 seconds time elapsed After: $ perf stat -e '{slots,topdown-bad-spec,topdown-be-bound,topdown-fe-bound,topdown-retiring,branch-instructions,branch-misses,bus-cycles,cache-misses,cache-references,cpu-cycles,instructions,mem-loads,mem-stores,ref-cycles,baclears.any,ARITH.DIVIDER_ACTIVE}:W' -a sleep 1 Performance counter stats for 'system wide': 31040189283 slots (92.27%) 8997514811 topdown-bad-spec # 28.2% bad speculation (92.27%) 10997536028 topdown-be-bound # 34.5% backend bound (92.27%) 4778060526 topdown-fe-bound # 15.0% frontend bound (92.27%) 7086628768 topdown-retiring # 22.2% retiring (92.27%) 1417611942 branch-instructions (92.26%) 5285529 branch-misses # 0.37% of all branches (92.28%) 62922469 bus-cycles (92.29%) 1440708 cache-misses # 8.292 % of all cache refs (92.30%) 17374098 cache-references (76.94%) 8040889520 cpu-cycles (84.63%) 7709992319 instructions # 0.96 insn per cycle (92.32%) 0 mem-loads (92.32%) 1515669558 mem-stores (84.68%) 6542411177 ref-cycles (92.35%) 4154149 baclears.any (92.35%) 20556152 ARITH.DIVIDER_ACTIVE (84.59%) 1.010799593 seconds time elapsed Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Florian Fischer <florian.fischer@muhq.space> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Stephane Eranian <eranian@google.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220517052724.283874-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8f4f79 ] If any member in a group has a different cpu mask than the other members, the current perf stat disables group. when the perf metrics topdown events are part of the group, the below <not supported> error will be triggered. $ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1 WARNING: grouped events cpus do not match, disabling group: anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ } Performance counter stats for 'system wide': 141,465,174 slots <not supported> topdown-retiring 1,605,330,334 uncore_imc_free_running_0/dclk/ The perf metrics topdown events must always be grouped with a slots event as leader. Factor out evsel__remove_from_group() to only remove the regular events from the group. Remove evsel__must_be_in_group(), since no one use it anymore. With the patch, the topdown events aren't broken from the group for the splitting. $ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1 WARNING: grouped events cpus do not match, disabling group: anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ } Performance counter stats for 'system wide': 346,110,588 slots 124,608,256 topdown-retiring 1,606,869,976 uncore_imc_free_running_0/dclk/ 1.003877592 seconds time elapsed Fixes: a9a1790 ("perf stat: Ensure group is defined on top of the same cpu mask") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20220518143900.1493980-3-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 369e4ef ] `pcc_mailbox_probe` doesn't initialize all memory that has been allocated before the first time that one of it's members `txdone_irq` may be accessed. This leads to a an invalid load any time that this member is accessed: [ 2.429769] UBSAN: invalid-load in drivers/mailbox/pcc.c:684:22 [ 2.430324] UBSAN: invalid-load in drivers/mailbox/mailbox.c:486:12 [ 4.276782] UBSAN: invalid-load in drivers/acpi/cppc_acpi.c:314:45 Link: https://bugzilla.kernel.org/show_bug.cgi?id=215587 Fixes: ce02870 ("mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4bce84 ] We added checks to __pa() / __va() to ensure they're only called with appropriate addresses. But using BUG_ON() is too strong, it means virt_addr_valid() will BUG when DEBUG_VIRTUAL is enabled. Instead switch them to warnings, arm64 does the same. Fixes: 4dd7554 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220406145802.538416-5-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2efee6a ] The device-tree properties no-need-l1d-flush-msr-pr-1-to-0 and no-need-l1d-flush-kernel-on-user-access are the equivalents of H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY and H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS from the H_GET_CPU_CHARACTERISTICS hcall on pseries respectively. In commit d02fa40 ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes") the condition for disabling the L1D flush on kernel entry and user access was changed from any non-P9 CPU to only checking P7 and P8. Without the appropriate device-tree checks for newer processors on powernv, these flushes are unnecessarily enabled on those systems. This patch corrects this. Fixes: d02fa40 ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes") Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220404101536.104794-1-ruscur@russell.cc Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2a3c13 ] The device-tree property no-need-store-drain-on-priv-state-switch is equivalent to H_CPU_BEHAV_NO_STF_BARRIER from the H_CPU_GET_CHARACTERISTICS hcall on pseries. Since commit 84ed26f ("powerpc/security: Add a security feature for STF barrier") powernv systems with this device-tree property have been enabling the STF barrier when they have no need for it. This patch fixes this by clearing the STF barrier feature on those systems. Fixes: 84ed26f ("powerpc/security: Add a security feature for STF barrier") Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220404101536.104794-2-ruscur@russell.cc Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505d316 ] Thresh compare bits for a event is used to program thresh compare field in Monitor Mode Control Register A (MMCRA: 8-18 bits for power10). When scheduling events as a group, all events in that group should match value in threshold bits. Otherwise event open for the sibling events should fail. But in the current code, incase thresh compare bits are not valid, we are not failing in group_constraint function which can result in invalid group schduling. Fix the issue by returning -1 incase event is threshold and threshold compare value is not valid in group_constraint function. Patch also fixes the p10_thresh_cmp_val function to return -1, incase threshold bits are not valid and changes corresponding check in is_thresh_cmp_valid function to return false only when the thresh_cmp value is less then 0. Thresh control bits in the event code is used to program thresh_ctl field in Monitor Mode Control Register A (MMCRA: 48-55). In below example, the scheduling of group events PM_MRK_INST_CMPL (3534401e0) and PM_THRESH_MET (34340101ec) is expected to fail as both event request different thresh control bits. Result before the patch changes: [command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1 Performance counter stats for 'sleep 1': 8,482 r35340401e0 0 r34340101ec 1.001474838 seconds time elapsed 0.001145000 seconds user 0.000000000 seconds sys Result after the patch changes: [command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1 Performance counter stats for 'sleep 1': <not counted> r35340401e0 <not supported> r34340101ec 1.001499607 seconds time elapsed 0.000204000 seconds user 0.000760000 seconds sys Fixes: 82d2c16 ("powerpc/perf: Adds support for programming of Thresholding in P10") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220506061015.43916-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab0cc6b ] Thresh compare bits for a event is used to program thresh compare field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9). When scheduling events as a group, all events in that group should match value in threshold bits (like thresh compare, thresh control, thresh select). Otherwise event open for the sibling events should fail. But in the current code, incase thresh compare bits are not valid, we are not failing in group_constraint function which can result in invalid group schduling. Fix the issue by returning -1 incase event is threshold and threshold compare value is not valid. Thresh control bits in the event code is used to program thresh_ctl field in Monitor Mode Control Register A (MMCRA: 48-55). In below example, the scheduling of group events PM_MRK_INST_CMPL (873534401e0) and PM_THRESH_MET (8734340101ec) is expected to fail as both event request different thresh control bits and invalid thresh compare value. Result before the patch changes: [command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1 Performance counter stats for 'sleep 1': 11,048 r8735340401e0 1,967 r8734340101ec 1.001354036 seconds time elapsed 0.001421000 seconds user 0.000000000 seconds sys Result after the patch changes: [command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1 Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (r8735340401e0). /bin/dmesg | grep -i perf may provide additional information. Fixes: 78a16d9 ("powerpc/perf: Avoid FAB_*_MATCH checks for power9") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220506061015.43916-2-kjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9c5ff ] Fix build when RTC_LIB is not set/enabled. Eliminates these build errors: m68k-linux-ld: drivers/macintosh/via-pmu.o: in function `pmu_set_rtc_time': drivers/macintosh/via-pmu.c:1769: undefined reference to `rtc_tm_to_time64' m68k-linux-ld: drivers/macintosh/via-cuda.o: in function `cuda_set_rtc_time': drivers/macintosh/via-cuda.c:797: undefined reference to `rtc_tm_to_time64' Fixes: 0792a2c ("macintosh: Use common code to access RTC") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220410161035.592-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e414e29 ] 'xive_irq_bitmap_add()' can return -ENOMEM. In this case, we should free the memory already allocated and return 'false' to the caller. Also add an error path which undoes the 'tima = ioremap(...)' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/564998101804886b151235c8a9f93020923bfd2c.1643718324.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d1fb96 ] of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: eac1e73 ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512090535.33397-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcee969 ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: abc3aea ("fsl-rio: Add two ports and rapidio message units support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad91f66 ] On fsl_book3e, rodata is set read-only at the same time as init text is set NX at the end of init. That's too early. As both action are performed at the same time, delay both actions to the time rodata is expected to be made read-only. It means we will have a small window with init mem freed but still executable. It shouldn't be an issue though, especially because the said memory gets poisoned and should therefore result to a bad instruction fault in case it gets executed. mmu_mark_initmem_nx() is bailing out before doing anything when CONFIG_STRICT_KERNEL_RWX is not selected or rodata_enabled is false. mmu_mark_rodata_ro() is called only when CONFIG_STRICT_KERNEL_RWX is selected and rodata_enabled is true so this is equivalent. Move code from mmu_mark_initmem_nx() into mmu_mark_rodata_ro() and remove the call to strict_kernel_rwx_enabled() which is not needed anymore. Fixes: d597004 ("powerpc/fsl_booke: Update of TLBCAMs after init") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/2e35f0fd649c83c5add17a99514ac040767be93a.1652981047.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c680c6a ] We should have 'n', then 'size', not the opposite. This is harmless because the 2 values are just multiplied, but having the correct order silence a (unpublished yet) smatch warning. Fixes: cb8c474 ("gpio: sim: new testing module") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 311242c ] It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: b5e29aa ("mfd: davinci_voicecodec: Remove pointless #include") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220426030857.3539336-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5e363 ] Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is tracked via a percpu counter. In the current code the percpu counter is destroyed before. If any pending cache is still present, percpu_counter_add is called with a percpu counter==NULL. This causes a kernel crash. The solution is to destroy the percpu counter after the cache is freed. Fixes: e567b98 (“nfsd: protect concurrent access to nfsd stats counters”) Signed-off-by: Julian Schroeder <jumaco@amazon.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bca1a10 ] This reverts commit c7dacf5, "mailbox: avoid timer start from callback" The previous commit was reverted since it lead to a race that caused the hrtimer to not be started at all. The check for hrtimer_active() in msg_submit() will return true if the callback function txdone_hrtimer() is currently running. This function could return HRTIMER_NORESTART and then the timer will not be restarted, and also msg_submit() will not start the timer. This will lead to a message actually being submitted but no timer will start to check for its compleation. The original fix that added checking hrtimer_active() was added to avoid a warning with hrtimer_forward. Looking in the kernel another solution to avoid this warning is to check hrtimer_is_queued() before calling hrtimer_forward_now() instead. This however requires a lock so the timer is not started by msg_submit() inbetween this check and the hrtimer_forward() call. Fixes: c7dacf5 ("mailbox: avoid timer start from callback") Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05c03df ] If there is a failure during probe of hfi1 before the sdma_map_lock is initialized, the call to hfi1_free_devdata() will attempt to use a lock that has not been initialized. If the locking correctness validator is on then an INFO message and stack trace resembling the following may be seen: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Call Trace: register_lock_class+0x11b/0x880 __lock_acquire+0xf3/0x7930 lock_acquire+0xff/0x2d0 _raw_spin_lock_irq+0x46/0x60 sdma_clean+0x42a/0x660 [hfi1] hfi1_free_devdata+0x3a7/0x420 [hfi1] init_one+0x867/0x11a0 [hfi1] pci_device_probe+0x40e/0x8d0 The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map memory, and sdma_map is not allocated/initialized until after sdma_map_lock has been initialized. This code only needs to be run if sdma_map is not NULL, and so checking for that condition will avoid trying to use the lock before it is initialized. Fixes: 473291b ("IB/hfi1: Fix for early release of sdma context") Fixes: 7724105 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20220520183701.48973.72434.stgit@awfm-01.cornelisnetworks.com Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8396980 ] The irqchip ops are called with a raw spinlock held, so the subsequent regmap usage cannot use a plain spinlock. spi-hid-apple-of spi0.0: spihid_apple_of_probe:74 ============================= [ BUG: Invalid wait context ] 5.18.0-asahi-00176-g0fa3ab03bdea #1337 Not tainted ----------------------------- kworker/u20:3/86 is trying to lock: ffff8000166b5018 (pinctrl_apple_gpio:462:(®map_config)->lock){....}-{3:3}, at: regmap_lock_spinlock+0x18/0x30 other info that might help us debug this: context-{5:5} 7 locks held by kworker/u20:3/86: #0: ffff800017725d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670 #1: ffff80001e33bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670 #2: ffff800017d629a0 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c #3: ffff80002414e618 (&ctlr->add_lock){+.+.}-{4:4}, at: spi_add_device+0x40/0x80 #4: ffff800024116990 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c #5: ffff800022d4be58 (request_class){+.+.}-{4:4}, at: __setup_irq+0xa8/0x720 #6: ffff800022d4bcc8 (lock_class){....}-{2:2}, at: __setup_irq+0xcc/0x720 Fixes: a0f160f ("pinctrl: add pinctrl/GPIO driver for Apple SoCs") Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220524142206.18833-1-marcan@marcan.st Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 619f51d ] The timer is disarmed when switching between TSC deadline and other modes; however, the pending timer is still in-flight, so let's accurately remove any traces of the previous mode. Fixes: 4427593 ("KVM: x86: thoroughly disarm LAPIC timer around TSC deadline switch") Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f76955 ] The commit 26623ee attempted to deal with potential leak of runtime PM counter when opening the touchscreen device, however it ended up erroneously dropping the counter in the case of successfully enabling the device. Let's address this by using pm_runtime_resume_and_get() and then executing pm_runtime_put_sync() only when we fail to send "sense on" command to the device. Fixes: 26623ee ("Input: stmfts - fix reference leak in stmfts_input_open") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907ed12 ] This code does not call of_node_put(opp_np) if of_get_next_available_child() returns NULL. But it should. Fixes: 45679f9 ("opp: Don't parse icc paths unnecessarily") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12662d1 ] As Wenqing reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215765 It will cause a kernel panic with steps: - mkdir mnt - mount tmp40.img mnt - ls mnt folio_mark_dirty+0x33/0x50 f2fs_add_regular_entry+0x541/0xad0 [f2fs] f2fs_add_dentry+0x6c/0xb0 [f2fs] f2fs_do_add_link+0x182/0x230 [f2fs] __recover_dot_dentries+0x2d6/0x470 [f2fs] f2fs_lookup+0x5af/0x6a0 [f2fs] __lookup_slow+0xac/0x200 lookup_slow+0x45/0x70 walk_component+0x16c/0x250 path_lookupat+0x8b/0x1f0 filename_lookup+0xef/0x250 user_path_at_empty+0x46/0x70 vfs_statx+0x98/0x190 __do_sys_newlstat+0x41/0x90 __x64_sys_newlstat+0x1a/0x30 do_syscall_64+0x37/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is for special file: e.g. character, block, fifo or socket file, f2fs doesn't assign address space operations pointer array for mapping->a_ops field, so, in a fuzzed image, if inline_dots flag was tagged in special file, during lookup(), when f2fs runs into __recover_dot_dentries(), it will cause NULL pointer access once f2fs_add_regular_entry() calls a_ops->set_dirty_page(). Fixes: 510022a ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries") Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2aaf51d ] The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set. Fixes: 8c242db ("f2fs: fix stale ATOMIC_WRITTEN_PAGE private pointer") Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72f045d ] Let's follow the origin patch's spirit: The only difference between rv32_defconfig and defconfig is that rv32_defconfig has CONFIG_ARCH_RV32I=y. This is helpful to compare rv64-compat-rv32 v.s. rv32-linux. Fixes: 1b937e8 ("RISC-V: Add separate defconfig for 32bit systems") Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220405071314.3225832-9-guoren@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 121660b ] Previously the AMD IOMMU would only enable SWIOTLB in certain circumstances: * IOMMU in passthrough mode * SME enabled This logic however doesn't work when an untrusted device is plugged in that doesn't do page aligned DMA transactions. The expectation is that a bounce buffer is used for those transactions. This fails like this: swiotlb buffer is full (sz: 4096 bytes), total 0 (slots), used 0 (slots) That happens because the bounce buffers have been allocated, followed by freed during startup but the bounce buffering code expects that all IOMMUs have left it enabled. Remove the criteria to set up bounce buffers on AMD systems to ensure they're always available for supporting untrusted devices. Fixes: 82612d6 ("iommu: Allow the dma-iommu api to use bounce buffers") Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220404204723.9767-2-mario.limonciello@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 645b87c ] In the commit 4f956c9 ("iommu/mediatek: Move domain_finalise into attach_device"), I overlooked the sharing pgtable case. After that commit, the "data" in the mtk_iommu_domain_finalise always is the data of the current IOMMU HW. Fix this for the sharing pgtable case. Only affect mt2712 which is the only SoC that share pgtable currently. Fixes: 4f956c9 ("iommu/mediatek: Move domain_finalise into attach_device") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-5-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee55f75 ] Lack the list_del in the mtk_iommu_remove, and remove bus_set_iommu(*, NULL) since there may be several iommu HWs. we can not bus_set_iommu null when one iommu driver unbind. This could be a fix for mt2712 which support 2 M4U HW and list them. Fixes: 7c3a2ec ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-6-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98df772 ] After the commit b34ea31 ("iommu/mediatek: Always enable the clk on resume"), the iommu clock is controlled by the runtime callback. thus remove the clk control in the mtk_iommu_remove. Otherwise, it will warning like: echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind [ 51.413044] ------------[ cut here ]------------ [ 51.413648] vpp0_smi_iommu already disabled [ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/ drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 51.417174] Hardware name: MT8195V/C(ENG) (DT) [ 51.418635] pc : clk_core_disable+0xb0/0xb8 [ 51.419177] lr : clk_core_disable+0xb0/0xb8 ... [ 51.429375] Call trace: [ 51.429694] clk_core_disable+0xb0/0xb8 [ 51.430193] clk_core_disable_lock+0x24/0x40 [ 51.430745] clk_disable+0x20/0x30 [ 51.431189] mtk_iommu_remove+0x58/0x118 [ 51.431705] platform_remove+0x28/0x60 [ 51.432197] device_release_driver_internal+0x110/0x1f0 [ 51.432873] device_driver_detach+0x18/0x28 [ 51.433418] unbind_store+0xd4/0x108 [ 51.433886] drv_attr_store+0x24/0x38 [ 51.434363] sysfs_kf_write+0x40/0x58 [ 51.434843] kernfs_fop_write_iter+0x164/0x1e0 Fixes: b34ea31 ("iommu/mediatek: Always enable the clk on resume") Reported-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-7-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e5a3f2 ] Add a mutex to protect the data in the structure mtk_iommu_data, like ->"m4u_group" ->"m4u_dom". For the internal data, we should protect it in ourselves driver. Add a mutex for this. This could be a fix for the multi-groups support. Fixes: c3045f3 ("iommu/mediatek: Support for multi domains") Signed-off-by: Yunfei Wang <yf.wang@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-8-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
…flags BugLink: [Replace -fcf-protection=none patch with new version] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline support to prevents such build failures. Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1585311 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <tcrawford@system76.com>
This patch was written by Takashi Iwai, I am just commiting it into the pop-os kernel before this is upstreamed
….202206090934 Signed-off-by: Jeremy Soller <jackpot51@gmail.com>
Closed
13r0ck
previously approved these changes
Jun 15, 2022
Asus released motherboard(s) with an alternate ALC4080 that lacks a SPDIF jack, and requires applying this map.
Fixes speaker output and headset detection on Clevo PD70PNT. Signed-off-by: Tim Crawford <tcrawford@system76.com>
Fixes headset detection on Clevo NS50PU. Signed-off-by: Tim Crawford <tcrawford@system76.com>
|
Closed, #156 has upstream security fixes |
jackpot51
pushed a commit
that referenced
this pull request
Sep 20, 2023
[ Upstream commit 9e14606 ] Since limited tracking device per condition, this feature is to support tracking multiple devices concurrently. When a pattern monitor detects the device, this feature issues an address monitor for tracking that device. Let pattern monitor can keep monitor new devices. This feature adds an address filter when receiving a LE monitor device event which monitor handle is for a pattern, and the controller started monitoring the device. And this feature also has cancelled the monitor advertisement from address filters when receiving a LE monitor device event when the controller stopped monitoring the device specified by an address and monitor handle. Below is an example to know the feature adds the address filter. //Add MSFT pattern monitor < HCI Command: Vendor (0x3f|0x00f0) plen 14 #142 [hci0] 55.552420 03 b8 a4 03 ff 01 01 06 09 05 5f 52 45 46 .........._REF > HCI Event: Command Complete (0x0e) plen 6 #143 [hci0] 55.653960 Vendor (0x3f|0x00f0) ncmd 2 Status: Success (0x00) 03 00 //Got event from the pattern monitor > HCI Event: Vendor (0xff) plen 18 #148 [hci0] 58.384953 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 00 01 .. //Add MSFT address monitor (Sample address: B8:27:EB:29:C1:FB) < HCI Command: Vendor (0x3f|0x00f0) plen 13 #149 [hci0] 58.385067 03 b8 a4 03 ff 04 00 fb c1 29 eb 27 b8 .........).'. //Report to userspace about found device (ADV Monitor Device Found) @ MGMT Event: Unknown (0x002f) plen 38 {0x0003} [hci0] 58.680042 01 00 fb c1 29 eb 27 b8 01 ce 00 00 00 00 16 00 ....).'......... 0a 09 4b 45 59 42 44 5f 52 45 46 02 01 06 03 19 ..KEYBD_REF..... c1 03 03 03 12 18 ...... //Got event from address monitor > HCI Event: Vendor (0xff) plen 18 #152 [hci0] 58.672956 23 79 54 33 77 88 97 68 02 00 fb c1 29 eb 27 b8 #yT3w..h....).'. 01 01 Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Hilda Wu <hildawu@realtek.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 253f339 ("Bluetooth: HCI: Introduce HCI_QUIRK_BROKEN_LE_CODED") Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.17.14