Signed-off-by: Antony Rheneus <arheneus@marvell.com>

…3295)

Sflow Tables (sonic-net#299)
[Warnings] Fix all printf format specifiers for 32bit arch compilation
(sonic-net#298)
[schema]: Add APP_ACL_TABLE and APP_ACL_RULE_TABLE (sonic-net#275)

…net#3273)

* [Makefile/slave docker] ARM arch doesn't support few packages
  iproute2 is missing for ARM sonic-slave docker

Signed-off-by: Antony Rheneus <arheneus@marvell.com>

sonic-net#3288)

Signed-off-by: Antony Rheneus <arheneus@marvell.com>

…#3279)

when device disk is small, do not unzip dockerfs.tar.gz on disk.
keep the tar file on the disk, unzip to tmpfs in the initrd phase.

enabled this for 7050-qx32

Signed-off-by: Guohan Lu <gulv@microsoft.com>

…onic-net#3267)

…e event (sonic-net#3261)

Add fan control for as7116-54x
Modify sfputil.py to support sfp insert and remove events for as7116-54x
Modify port_config.nps to set port default admin down
Modify port_config.ini for add speed attr
Code format optimization like remove newline
Modify buffers_defaults_t0 and t1, change ingress_lossless_pool mode from dynamic to static
Add nephos_dac.nps and nephos_opt.nps for support difference dac and fiber module

… platform (sonic-net#3240)

* Utilize the same sai.profile and config.bcm file

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>

* Fix the index issues for HWSKU: Seastone-DX010-25-50 and Seastone-DX010-50-40

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>

* Update sonic-swss submodule

* src/sonic-swss 63afbd5...5be3963 (11):
  > Remove the platform check for remove/add port action at init phase. (sonic-net#1006)
  > [test]: Add Class object in each test script file (sonic-net#992)
  > [vstest]: add --imgname option to specify vs image to test (sonic-net#996)
  > [qosorch]: Add cir and pir parameters for scheduler (sonic-net#991)
  > [vstest]: report error when team kernel module is not available (sonic-net#994)
  > Support per buffer pool watermark polling mode (sonic-net#973)
  > [test]: Update test_vlan to use dvs functions (sonic-net#986)
  > Add synchronous switch to orch agent (sonic-net#987)
  > ARM32 bit fixes, for 64bit printf format specifier (sonic-net#989)
  > [portsorch]: Rename function isPortReady() to allPortsReady() (sonic-net#990)
  > [routeorch]: Fix observer detaching procedure for next hop observers (sonic-net#985)

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>

…nic-net#3234)

Corrected the ingress and egress lossy and lossless buffer pool and profile values.
Single pool for lossy and lossless traffic for PFC priority 3 and 4.
In HWSKU DellEMC-S5232f-P-100GG/25G/10G. Defaults to lossy profile. No Lossless support.
2 default mmu_init.data files (TD3-DEFAULT-LOSSLESS-P3P4 and "TD3-DEFAULT" created in SAI code. This will have cpu pool configuration and MMU init related configurations.
TD3-DEFAULT.data file is only supports lossy.
TD3-DEFAULT-LOSSLESS-P3P4.data file is supports lossless on P3 and P4.

…onic-net#3297)

Switch Vendor: Quanta
Switch SKU: IX7-32X
CPU: Intel C2558
ASIC Vendor: Broadcom
Switch ASIC: Trident3, BCM56870
Port Configuration: 32x100G

Switch Vendor: Quanta
Switch SKU: IX8-56X
CPU: Intel C2558
ASIC Vendor: Broadcom
Switch ASIC: Trident3, BCM56873
Port Configuration: 48x25G + 8x100G

Signed-off-by: Jonathan Tsai <jonathan.tsai@quantatw.com>

This switch has 27 fiber ports, 4x25G, 20x10G , and 3x100G ports ports.
CPU: Intel ® Atom™ Processor C3508,1.6GHz
BMC: None
MAC: Broadcom BCM88470 (Qumran AX).
MISC: Support IEEE1588v2, hot-swappable PSU, hot-swappable fan tray.

But notice here, BCM88470 is not supported for SAI now.
So the syncd container is not running so far.

Signed-off-by: roy_lee <roy_lee@accton.com>

* fix sfpd initialize issue
* fix review comments
* rephrase the output log
* fix retry counter
* change the retry time to 10, means set max waiting time 1024s
* fix mlnx-sfpd init flow with new solution
* [mlnx-sfpd] address comments
1. wait for 5 seconds * 30 times, 150 seconds totally. use constant wait time for each retry.
2. use try/except structure so that error can be handled in a graceful way
* [mlnx-sfpd] wait 5 seconds after SDK_DAEMON_READY_FILE exists to make sure SDK is fully up.
* [mlnx-sfpd]simplify initialization by using deinitialize on initializing failure

…3309)

* [sonic-cfg] [Marvell] get_system_mac() to fetch valid mac address from Eeprom else
get mac address from eth0

* [platform] Marvell mac address fetch for different platform based on board

Signed-off-by: Antony Rheneus <arheneus@marvell.com>

…-net#3310)

Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>

…md (sonic-net#3311)

* [service dependent] describe non-warm-reboot dependency outside systemctl

When dependency was described with systemctl, it will kick in all the time,
including under warm reboot/restart scenarios. This is not what we always
want. For components that are capable of warm reboot/start, they need to
describe dependency in service files.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* [service] teamd service should not require swss service

Adding require swss will cause teamd to be killed by systemctl when swss
stops. This is not what we want in warm reboot.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

* refactoring code

* rename functions to match other functions in the file

Signed-off-by: johnson <JOHNSON.LU@deltaww.com>

* Enable debug image build for kvm image.

* Fix a bug in cleaning up requests referring the netsmp_session being closed to avoid a crash, during netsnmp_session close/abort due to timeout.
RCA:
The netsnmp_agent_session requests use netsmp_subtree objects that matches the associated variable name.
The netsnmp_subtrees created through a netsnmp_session are tied to that session.
When a subagent connection is closed/dropped due to timeout, all associated netsnmp_subtree objects are fred.
Hence during a netsnmp_session close, all the delegated netsnmp_agent_sessions are scanned for requets that could be using netsnmp_subtree objects associated with this netsnmp_sesssion or its subsession. For each of the found request, they are explicitly marked to fail and a call is made to complete them.

But due to the bug in scanning, it leaves behind requests and hence later when the requests get processed, they refer the *now* freed netsnmp_subtree. As often these requests gets completed pretty soon, they escape crashing. But if it so happens that the freed memory happened to complete a memory unit, hence returned to kernel or it got reallocated & changed enough to crash, the snmpd crashes.

* Revert the changes

* Revert

…ce (sonic-net#3317)

Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>

…n pam.d's config. (sonic-net#3322)

Present: Servers are listed in the same order as in redis-db
Fix: Save the sort o/p, hence use sorted list to write into pam.d's conf.
     As well convert priority to integer for use by sort.

…onic-net#3316', change the sample_output file of 'wait_for_intf.sh' (sonic-net#3325)

Signed-off-by: wangshengjun <wangshengjun@asterfusion.com>

added support for sonic-cli console

Added sfputil.py for x86_64-accton_wedge100bf_32x-r0 and x86_64-accton_wedge100bf_65x-r0 devices.

Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>

…use version wrong (sonic-net#3329)

* [DELL][Z9100,S6100,S6000] Platform 2.0 SFP Changes

Added support in sfp.py file which will be generic. Send the eeprom path and sfp_control path from chassis.py

Merging latest changes from Azure - 2019-08-13

For Dell S5232F and Z9264F platforms, be more strict when checking state
in ISR of FPGA driver, to harden against spurious interrupts.

Signed-off-by: Howard Persh <Howard_Persh@dell.com>