Add QC60

keyboards/handwired/qc60/README.md

@@ -0,0 +1,22 @@
+QC60
+========
+
+![qc60 layout](https://i.imgur.com/BAW1VGc.png)
+
+A split 60% staggered keyboard made by Peioris.
+
+Keyboard Maintainer: [Peioris](https://github.com/coarse)  
+Hardware Supported: [QC60 PCB](https://imgur.com/6tIxJ1N), Pro Micro  
+Hardware Availability: N/A at the moment
+
+Handwiring Resources: [Pro Micro Wiring](https://imgur.com/UycEYlG), [Keymapping](http://www.keyboard-layout-editor.com/#/gists/a54720ecfd934155b179657938e8e87b)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/qc60/proto:default
+
+Example of flashing this keyboard:
+
+    make handwired/qc60/proto:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/handwired/qc60/config.h

@@ -0,0 +1,24 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0C60
+#define DEVICE_VER      0x00C6
+#define MANUFACTURER    PeiorisBoards
+#define PRODUCT         QC60
+#define DESCRIPTION     Split 60% staggered keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)

keyboards/handwired/qc60/info.json

@@ -0,0 +1,87 @@
+{
+  "keyboard_name": "QC60", 
+  "url": "", 
+  "maintainer": "coarse", 
+  "width": 15, 
+  "height": 5, 
+  "layouts": {
+    "LAYOUT_ANSI_DEFAULT": {
+      "key_count": 64,
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"-", "x":11, "y":0},
+        {"label":"=", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":2.0},
+
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"[", "x":11.5, "y":1},
+        {"label":"]", "x":12.5, "y":1},
+        {"label":"\\", "x":13.5, "y":1, "w":1.5},
+
+        {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":";", "x":10.75, "y":2},
+        {"label":"'", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":",", "x":9.25, "y":3},
+        {"label":".", "x":10.25, "y":3},
+        {"label":"/", "x":11.25, "y":3},
+        {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+        {"label":"Win", "x":1.25, "y":4, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+        {"x":3.75, "y":4, "w":2.75},
+        {"x":6.5, "y":4, "w":1.25},
+
+        {"x":7.75, "y":4, "w":1.25},
+        {"x":9, "y":4, "w":2.0},
+        {"label":"Alt", "x":11, "y":4},
+        {"label":"Win", "x":12, "y":4},
+        {"label":"Menu", "x":13, "y":4},
+        {"label":"Ctrl", "x":14, "y":4}
+      ]
+    }
+  }
+}

keyboards/handwired/qc60/keymaps/default/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#define USE_I2C
+
+#define MASTER_LEFT

keyboards/handwired/qc60/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2018 Michael Pio Mayol <mfmayol@up.edu.ph>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_ansi_default(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,                   KC_RSFT, \
+    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,           RGB_TOG, KC_RGHT,          KC_SPC,           KC_RALT, KC_UP,   KC_DOWN, KC_RCTL
+  ),
+
+};

keyboards/handwired/qc60/keymaps/wntrmln/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#define USE_SERIAL
+
+#define MASTER_LEFT

keyboards/handwired/qc60/keymaps/wntrmln/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Michael Pio Mayol <mfmayol@up.edu.ph>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BASE 0
+#define _FN 1
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define FN MO(_FN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_hhkb_split_lshift(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_DEL,  \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                 KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                 KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,     KC_ENT,       \
+    KC_LSFT, KC_RSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,     KC_RSFT,      KC_CAPS, \
+                      FN,   KC_LALT,      KC_SPC,       KC_F13,        KC_BSLS,      KC_SPC,      KC_RALT, KC_LGUI
+  ),
+
+  [_FN] = LAYOUT_hhkb_split_lshift(
+    RESET,   _______, _______, _______, _______, _______, _______,        _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, KC_UP,   _______, _______, _______,                 _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,                 _______, _______, _______, _______, _______, _______,     _______,      \
+    _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______, _______, _______,     _______,      _______, \
+                      _______, _______,     _______,      KC_NLCK,        _______,      _______,     _______, _______
+  ),
+
+};

keyboards/handwired/qc60/proto/config.h

@@ -0,0 +1,14 @@
+#pragma once
+
+#include "config_common.h"
+
+// wiring of each half
+#define MATRIX_ROW_PINS { F4, F5, C6, D7, E6 }
+#define MATRIX_COL_PINS { F7, F6, B1, B3, B2, B6, B5, B4 }
+#define DIODE_DIRECTION ROW2COL
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLED_NUM 1    // Number of LEDs
+// #define ws2812_PORTREG  PORTD
+// #define ws2812_DDRREG   DDRD

keyboards/handwired/qc60/proto/proto.c

@@ -0,0 +1,21 @@
+/* Copyright 2018 Michael Pio Mayol <mfmayol@up.edu.ph>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qc60.h"
+
+void matrix_init_kb(void) {
+    matrix_init_user();
+};