PCIe D3cold support#42
Merged
shashim-quic merged 2 commits intoqualcomm-linux:tech/bus/pci/allfrom Jun 12, 2025
Merged
Conversation
|
I don't see FROMLIST or FROMGIT tags. |
At least on SC8280XP, if the PCIe reset is asserted, the corresponding AUX_CLK will be stuck at 'off'. This has not been an issue so far, since the reset is both left de-asserted by the previous boot stages and the driver only toggles it briefly in .init. As part of the upcoming suspend procedure however, the reset will be held asserted. Assert the reset (which may end up being a NOP in some cases) and de-assert it back *before* turning on the clocks in preparation for introducing RC powerdown and reinitialization. Link: https://lore.kernel.org/linux-pci/20240210-topic-8280_pcie-v2-0-1cef4b606883@linaro.org/ Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krishna Chaitanya Chundru <krichai@qti.qualcomm.com>
Currently, we've only been minimizing the power draw while keeping the RC up at all times. This is suboptimal, as it draws a whole lot of power and prevents the SoC from power collapsing. Implement full shutdown and re-initialization to allow for powering off the controller. This is mainly intended for SC8280XP with a broken power rail setup, which requires a full RC shutdown/reinit in order to reach SoC-wide power collapse, but sleeping is generally better than not sleeping and less destructive suspend can be implemented later for platforms that support it. Link: https://lore.kernel.org/linux-pci/20240210-topic-8280_pcie-v2-0-1cef4b606883@linaro.org/ Co-developed-by: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krishna Chaitanya Chundru <krichai@qti.qualcomm.com>
krishnachaitanya-linux
force-pushed
the
tech/bus/pci/mhi
branch
from
6b56592 to
75f3cb0
Compare
Contributor
Author
Updated the tags and lore link of the patches. |
shashim-quic
approved these changes
Jun 12, 2025
Collaborator
|
@krishnachaitanya-linux looks like @qualcomm-linux/kernel-tech-bus-pci-maint is empty. This is the list that would have maintenance rights for pci topic branch. For now I will merge this PR, however once this is fixed topic branch maintainer expected to take care of their PRs. @njjetha can you please check this. |
sgaud-quic
pushed a commit
that referenced
this pull request
Jan 20, 2026
During device unmapping (triggered by module unload or explicit unmap), a refcount underflow occurs causing a use-after-free warning: [14747.574913] ------------[ cut here ]------------ [14747.574916] refcount_t: underflow; use-after-free. [14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378 [14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ... [14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ #42 PREEMPT(voluntary) [14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client] [14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90 [14747.575037] Call Trace: [14747.575038] <TASK> [14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client] [14747.575044] process_one_work+0x211/0x600 [14747.575052] worker_thread+0x184/0x330 [14747.575055] ? __pfx_worker_thread+0x10/0x10 [14747.575058] kthread+0x10d/0x250 [14747.575062] ? __pfx_kthread+0x10/0x10 [14747.575066] ret_from_fork+0x319/0x390 [14747.575069] ? __pfx_kthread+0x10/0x10 [14747.575072] ret_from_fork_asm+0x1a/0x30 [14747.575083] </TASK> [14747.575096] ---[ end trace 0000000000000000 ]--- Befor this patch :- The bug is a double kobject_put() on dev->kobj during device cleanup. Kobject Lifecycle: kobject_init_and_add() sets kobj.kref = 1 (initialization) kobject_put() sets kobj.kref = 0 (should be called once) * Before this patch: rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs] kobject_put(&dev->kobj) PUT #1 (WRONG!) kref: 1 to 0 rnbd_dev_release() kfree(dev) [DEVICE FREED!] rnbd_destroy_gen_disk() [use-after-free!] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) PUT #2 (UNDERFLOW!) kref: 0 to -1 [WARNING!] The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the device via rnbd_dev_release(), then the second kobject_put() in rnbd_clt_put_dev() causes refcount underflow. * After this patch :- Remove kobject_put() from rnbd_destroy_sysfs(). This function should only remove sysfs visibility (kobject_del), not manage object lifetime. Call Graph (FIXED): rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs only] [kref unchanged: 1] rnbd_destroy_gen_disk() [device still valid] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) ONLY PUT (CORRECT!) kref: 1 to 0 [BALANCED] rnbd_dev_release() kfree(dev) [CLEAN DESTRUCTION] This follows the kernel pattern where sysfs removal (kobject_del) is separate from object destruction (kobject_put). Fixes: 581cf83 ("block: rnbd: add .release to rnbd_dev_ktype") Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
apateriy-qcom
pushed a commit
to apateriy-qcom/kernel-topics
that referenced
this pull request
Jan 23, 2026
During device unmapping (triggered by module unload or explicit unmap), a refcount underflow occurs causing a use-after-free warning: [14747.574913] ------------[ cut here ]------------ [14747.574916] refcount_t: underflow; use-after-free. [14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378 [14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ... [14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ qualcomm-linux#42 PREEMPT(voluntary) [14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client] [14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90 [14747.575037] Call Trace: [14747.575038] <TASK> [14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client] [14747.575044] process_one_work+0x211/0x600 [14747.575052] worker_thread+0x184/0x330 [14747.575055] ? __pfx_worker_thread+0x10/0x10 [14747.575058] kthread+0x10d/0x250 [14747.575062] ? __pfx_kthread+0x10/0x10 [14747.575066] ret_from_fork+0x319/0x390 [14747.575069] ? __pfx_kthread+0x10/0x10 [14747.575072] ret_from_fork_asm+0x1a/0x30 [14747.575083] </TASK> [14747.575096] ---[ end trace 0000000000000000 ]--- Befor this patch :- The bug is a double kobject_put() on dev->kobj during device cleanup. Kobject Lifecycle: kobject_init_and_add() sets kobj.kref = 1 (initialization) kobject_put() sets kobj.kref = 0 (should be called once) * Before this patch: rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs] kobject_put(&dev->kobj) PUT qualcomm-linux#1 (WRONG!) kref: 1 to 0 rnbd_dev_release() kfree(dev) [DEVICE FREED!] rnbd_destroy_gen_disk() [use-after-free!] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) PUT qualcomm-linux#2 (UNDERFLOW!) kref: 0 to -1 [WARNING!] The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the device via rnbd_dev_release(), then the second kobject_put() in rnbd_clt_put_dev() causes refcount underflow. * After this patch :- Remove kobject_put() from rnbd_destroy_sysfs(). This function should only remove sysfs visibility (kobject_del), not manage object lifetime. Call Graph (FIXED): rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs only] [kref unchanged: 1] rnbd_destroy_gen_disk() [device still valid] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) ONLY PUT (CORRECT!) kref: 1 to 0 [BALANCED] rnbd_dev_release() kfree(dev) [CLEAN DESTRUCTION] This follows the kernel pattern where sysfs removal (kobject_del) is separate from object destruction (kobject_put). Fixes: 581cf83 ("block: rnbd: add .release to rnbd_dev_ktype") Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
During device unmapping (triggered by module unload or explicit unmap), a refcount underflow occurs causing a use-after-free warning: [14747.574913] ------------[ cut here ]------------ [14747.574916] refcount_t: underflow; use-after-free. [14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378 [14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ... [14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ #42 PREEMPT(voluntary) [14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client] [14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90 [14747.575037] Call Trace: [14747.575038] <TASK> [14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client] [14747.575044] process_one_work+0x211/0x600 [14747.575052] worker_thread+0x184/0x330 [14747.575055] ? __pfx_worker_thread+0x10/0x10 [14747.575058] kthread+0x10d/0x250 [14747.575062] ? __pfx_kthread+0x10/0x10 [14747.575066] ret_from_fork+0x319/0x390 [14747.575069] ? __pfx_kthread+0x10/0x10 [14747.575072] ret_from_fork_asm+0x1a/0x30 [14747.575083] </TASK> [14747.575096] ---[ end trace 0000000000000000 ]--- Befor this patch :- The bug is a double kobject_put() on dev->kobj during device cleanup. Kobject Lifecycle: kobject_init_and_add() sets kobj.kref = 1 (initialization) kobject_put() sets kobj.kref = 0 (should be called once) * Before this patch: rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs] kobject_put(&dev->kobj) PUT #1 (WRONG!) kref: 1 to 0 rnbd_dev_release() kfree(dev) [DEVICE FREED!] rnbd_destroy_gen_disk() [use-after-free!] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) PUT #2 (UNDERFLOW!) kref: 0 to -1 [WARNING!] The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the device via rnbd_dev_release(), then the second kobject_put() in rnbd_clt_put_dev() causes refcount underflow. * After this patch :- Remove kobject_put() from rnbd_destroy_sysfs(). This function should only remove sysfs visibility (kobject_del), not manage object lifetime. Call Graph (FIXED): rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs only] [kref unchanged: 1] rnbd_destroy_gen_disk() [device still valid] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) ONLY PUT (CORRECT!) kref: 1 to 0 [BALANCED] rnbd_dev_release() kfree(dev) [CLEAN DESTRUCTION] This follows the kernel pattern where sysfs removal (kobject_del) is separate from object destruction (kobject_put). Fixes: 581cf83 ("block: rnbd: add .release to rnbd_dev_ktype") Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
These are upstream patches which have support to keep PCIe link in D3cold as part of system suspend.