Closed
Conversation
Add support for 8 GPIOs support by PM7325b PMIC. Change-Id: Ib43010db673ea44c44e5bc276dcfea2699851f02 Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Add suspend and resume runtime pm ops. For LPI island mode required to unvote audio and core hw clocks. Change-Id: I79ce1e11e314d77406095fd4f56a8c8aebfa269e Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Add pinctrl driver to support pin configuration for LPASS (Low Power Audio SubSystem) LPI (Low Power Island) pinctrl on sa8775p. This IP is an additional pin control block for Audio Pins on top the existing SoC Top level pin-controller. Change-Id: I1beeae8720efb24ba2d3b238c44bcd108fe2d6b8 Signed-off-by: leqi <quic_leqi@quicinc.com> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Modify the function and group binding for cci_i2c gpios. Change-Id: I6e06387ea1b6c6eeb4576b007fb27925a5444210 Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
SA8255p platform uses the same pincontrol as used in SA8775p. This change adds SA8255p compatible to add support. Change-Id: Iefa8763c787fa8c8978e81efaa3065e53f9617a7 Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Add pinctrl driver to support pin configuration for LPASS (Low Power Audio SubSystem) LPI (Low Power Island) pinctrl on qcs8300. This IP is an additional pin control block for Audio Pins on top the existing SoC Top level pin-controller. Change-Id: I3cf6b8afc263ca1cd41d65d2287b2e7119008400 Signed-off-by: leqi <quic_leqi@quicinc.com>
Modify the function and group binding for cci_i2c gpios. Change-Id: Ic8efbd3d4d212c7f6d3c3b4839c6702570000d47 Signed-off-by: Stark Lin <quic_starlin@quicinc.com>
Add support for SA7255P TLMM configuration and control via the pinctrl framework. Change-Id: If8ed4c9a2c935b9c3db0a913765845b0f19cb0ff Signed-off-by: Sankalp Negi <quic_snegi@quicinc.com>
Add wakeup irq and pdc map for enabling PHY irq for sa7255p. Change-Id: I0ccd10fb6274952644440dfd935f8bd1d03bae46 Signed-off-by: Sankalp Negi <quic_snegi@quicinc.com>
Correct the ngpios entry to account for the UFS_RESET pin being exported as a GPIO in addition to the real GPIOs, allowing the UFS driver to toggle it. Fixes: b698f36 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Change-Id: If4c29ae49c23997129673136091f361df697fa42 Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/all/20241219-correct_gpio_ranges-v2-3-19af8588dbd0@quicinc.com/ Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Fix pinctrl driver to support pin configuration for LPASS (Low Power Audio SubSystem) LPI (Low Power Island) quad pinctrl function on sa8775p. Change-Id: I67069a701860b6370371f37439c0b05115d51404 Signed-off-by: Kumar Anurag Singh <quic_kumaranu@quicinc.com> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Shiraz Hashim <quic_shashim@quicinc.com>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
[BUG] There is a syzbot report that the ASSERT() inside write_dev_supers() got triggered: assertion failed: folio_order(folio) == 0, in fs/btrfs/disk-io.c:3858 ------------[ cut here ]------------ kernel BUG at fs/btrfs/disk-io.c:3858! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 6730 Comm: syz-executor378 Not tainted 6.14.0-syzkaller-03565-gf6e0150b2003 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:write_dev_supers fs/btrfs/disk-io.c:3858 [inline] RIP: 0010:write_all_supers+0x400f/0x4090 fs/btrfs/disk-io.c:4155 Call Trace: <TASK> btrfs_commit_transaction+0x1eda/0x3750 fs/btrfs/transaction.c:2528 btrfs_quota_enable+0xfcc/0x21a0 fs/btrfs/qgroup.c:1226 btrfs_ioctl_quota_ctl+0x144/0x1c0 fs/btrfs/ioctl.c:3677 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5ad1f20289 </TASK> ---[ end trace 0000000000000000 ]--- [CAUSE] Since commit f93ee0d ("btrfs: convert super block writes to folio in write_dev_supers()") and commit c94b734 ("btrfs: convert super block writes to folio in wait_dev_supers()"), the super block writeback path is converted to use folio. Since the original code is using page based interfaces, we have an "ASSERT(folio_order(folio) == 0);" added to make sure everything is not changed. But the folio here is not from any btrfs inode, but from the block device, and we have no control on the folio order in bdev, the device can choose whatever folio size they want/need. E.g. the bdev may even have a block size of multiple pages. So the ASSERT() is triggered. [FIX] The super block writeback path has taken larger folios into consideration, so there is no need for the ASSERT(). And since commit bc00965 ("btrfs: count super block write errors in device instead of tracking folio error state"), the wait path no longer checks the folio status but only wait for the folio writeback to finish, there is nothing requiring the ASSERT() either. So we can remove both ASSERT()s safely now. Reported-by: syzbot+34122898a11ab689518a@syzkaller.appspotmail.com Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.
Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.
For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.
Unable to handle kernel paging request at virtual address dfffffc000000001
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
batman_adv: bat0: Interface deactivated: brbh1337
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000001] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
Hardware name: HW (DT)
pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
sp : ffffffc086ace450
x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
Call trace:
ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
ieee80211_handle_wake_tx_queue+0x16c/0x260
ieee80211_queue_skb+0xeec/0x1d20
ieee80211_tx+0x200/0x2c8
ieee80211_xmit+0x22c/0x338
__ieee80211_subif_start_xmit+0x7e8/0xc60
ieee80211_subif_start_xmit+0xc4/0xee0
__ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
ieee80211_subif_start_xmit_8023+0x124/0x488
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
br_dev_queue_push_xmit+0x120/0x4a8
__br_forward+0xe4/0x2b0
deliver_clone+0x5c/0xd0
br_flood+0x398/0x580
br_dev_xmit+0x454/0x9f8
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
ip6_finish_output2+0xc28/0x1b60
__ip6_finish_output+0x38c/0x638
ip6_output+0x1b4/0x338
ip6_local_out+0x7c/0xa8
ip6_send_skb+0x7c/0x1b0
ip6_push_pending_frames+0x94/0xd0
rawv6_sendmsg+0x1a98/0x2898
inet_sendmsg+0x94/0xe0
__sys_sendto+0x1e4/0x308
__arm64_sys_sendto+0xc4/0x140
do_el0_svc+0x110/0x280
el0_svc+0x20/0x60
el0t_64_sync_handler+0x104/0x138
el0t_64_sync+0x154/0x158
To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point).
Fixes: ba8c3d6 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/ff7849e268562456274213c0476e09481a48f489.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
When testing a special config: CONFIG_NETFS_SUPPORTS=y CONFIG_PROC_FS=n The system crashes with something like: [ 3.766197] ------------[ cut here ]------------ [ 3.766484] kernel BUG at mm/mempool.c:560! [ 3.766789] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 3.767123] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W [ 3.767777] Tainted: [W]=WARN [ 3.767968] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), [ 3.768523] RIP: 0010:mempool_alloc_slab.cold+0x17/0x19 [ 3.768847] Code: 50 fe ff 58 5b 5d 41 5c 41 5d 41 5e 41 5f e9 93 95 13 00 [ 3.769977] RSP: 0018:ffffc90000013998 EFLAGS: 00010286 [ 3.770315] RAX: 000000000000002f RBX: ffff888100ba8640 RCX: 0000000000000000 [ 3.770749] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 00000000ffffffff [ 3.771217] RBP: 0000000000092880 R08: 0000000000000000 R09: ffffc90000013828 [ 3.771664] R10: 0000000000000001 R11: 00000000ffffffea R12: 0000000000092cc0 [ 3.772117] R13: 0000000000000400 R14: ffff8881004b1620 R15: ffffea0004ef7e40 [ 3.772554] FS: 0000000000000000(0000) GS:ffff8881b5f3c000(0000) knlGS:0000000000000000 [ 3.773061] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.773443] CR2: ffffffff830901b4 CR3: 0000000004296001 CR4: 0000000000770ef0 [ 3.773884] PKRU: 55555554 [ 3.774058] Call Trace: [ 3.774232] <TASK> [ 3.774371] mempool_alloc_noprof+0x6a/0x190 [ 3.774649] ? _printk+0x57/0x80 [ 3.774862] netfs_alloc_request+0x85/0x2ce [ 3.775147] netfs_readahead+0x28/0x170 [ 3.775395] read_pages+0x6c/0x350 [ 3.775623] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.775928] page_cache_ra_unbounded+0x1bd/0x2a0 [ 3.776247] filemap_get_pages+0x139/0x970 [ 3.776510] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.776820] filemap_read+0xf9/0x580 [ 3.777054] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.777368] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.777674] ? find_held_lock+0x32/0x90 [ 3.777929] ? netfs_start_io_read+0x19/0x70 [ 3.778221] ? netfs_start_io_read+0x19/0x70 [ 3.778489] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.778800] ? lock_acquired+0x1e6/0x450 [ 3.779054] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.779379] netfs_buffered_read_iter+0x57/0x80 [ 3.779670] __kernel_read+0x158/0x2c0 [ 3.779927] bprm_execve+0x300/0x7a0 [ 3.780185] kernel_execve+0x10c/0x140 [ 3.780423] ? __pfx_kernel_init+0x10/0x10 [ 3.780690] kernel_init+0xd5/0x150 [ 3.780910] ret_from_fork+0x2d/0x50 [ 3.781156] ? __pfx_kernel_init+0x10/0x10 [ 3.781414] ret_from_fork_asm+0x1a/0x30 [ 3.781677] </TASK> [ 3.781823] Modules linked in: [ 3.782065] ---[ end trace 0000000000000000 ]--- This is caused by the following error path in netfs_init(): if (!proc_mkdir("fs/netfs", NULL)) goto error_proc; Fix this by adding ifdef in netfs_main(), so that /proc/fs/netfs is only created with CONFIG_PROC_FS. Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/20250409170015.2651829-1-song@kernel.org Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
SMC consists of two sockets: smc_sock and kernel TCP socket. Currently, there are two ways of creating the sockets, and syzbot reported a lockdep splat [0] for the newer way introduced by commit d25a92c ("net/smc: Introduce IPPROTO_SMC"). socket(AF_SMC , SOCK_STREAM, SMCPROTO_SMC or SMCPROTO_SMC6) socket(AF_INET or AF_INET6, SOCK_STREAM, IPPROTO_SMC) When a socket is allocated, sock_lock_init() sets a lockdep lock class to sk->sk_lock.slock based on its protocol family. In the IPPROTO_SMC case, AF_INET or AF_INET6 lock class is assigned to smc_sock. The repro sets IPV6_JOIN_ANYCAST for IPv6 UDP and SMC socket and exercises smc_switch_to_fallback() for IPPROTO_SMC. 1. smc_switch_to_fallback() is called under lock_sock() and holds smc->clcsock_release_lock. sk_lock-AF_INET6 -> &smc->clcsock_release_lock (sk_lock-AF_SMC) 2. Setting IPV6_JOIN_ANYCAST to SMC holds smc->clcsock_release_lock and calls setsockopt() for the kernel TCP socket, which holds RTNL and the kernel socket's lock_sock(). &smc->clcsock_release_lock -> rtnl_mutex (-> k-sk_lock-AF_INET6) 3. Setting IPV6_JOIN_ANYCAST to UDP holds RTNL and lock_sock(). rtnl_mutex -> sk_lock-AF_INET6 Then, lockdep detects a false-positive circular locking, .-> sk_lock-AF_INET6 -> &smc->clcsock_release_lock -> rtnl_mutex -. `-----------------------------------------------------------------' but IPPROTO_SMC should have the same locking rule as AF_SMC. sk_lock-AF_SMC -> &smc->clcsock_release_lock -> rtnl_mutex -> k-sk_lock-AF_INET6 Let's set the same lock class for smc_sock. Given AF_SMC uses the same lock class for SMCPROTO_SMC and SMCPROTO_SMC6, we do not need to separate the class for AF_INET and AF_INET6. [0]: WARNING: possible circular locking dependency detected 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Not tainted syz.4.1528/11571 is trying to acquire lock: ffffffff8fef8de8 (rtnl_mutex){+.+.}-{4:4}, at: ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 but task is already holding lock: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&smc->clcsock_release_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 smc_switch_to_fallback+0x2d/0xa00 net/smc/af_smc.c:903 smc_sendmsg+0x13d/0x520 net/smc/af_smc.c:2781 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (sk_lock-AF_INET6){+.+.}-{0:0}: lock_sock_nested+0x3a/0xf0 net/core/sock.c:3645 lock_sock include/net/sock.h:1624 [inline] sockopt_lock_sock net/core/sock.c:1133 [inline] sockopt_lock_sock+0x54/0x70 net/core/sock.c:1124 do_ipv6_setsockopt+0x2160/0x4520 net/ipv6/ipv6_sockglue.c:567 ipv6_setsockopt+0xcb/0x170 net/ipv6/ipv6_sockglue.c:993 udpv6_setsockopt+0x7d/0xd0 net/ipv6/udp.c:1850 do_sock_setsockopt+0x222/0x480 net/socket.c:2303 __sys_setsockopt+0x1a0/0x230 net/socket.c:2328 __do_sys_setsockopt net/socket.c:2334 [inline] __se_sys_setsockopt net/socket.c:2331 [inline] __x64_sys_setsockopt+0xbd/0x160 net/socket.c:2331 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: rtnl_mutex --> sk_lock-AF_INET6 --> &smc->clcsock_release_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&smc->clcsock_release_lock); lock(sk_lock-AF_INET6); lock(&smc->clcsock_release_lock); lock(rtnl_mutex); *** DEADLOCK *** 2 locks held by syz.4.1528/11571: #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: inode_lock include/linux/fs.h:877 [inline] #0: ffff888077e88208 (&sb->s_type->i_mutex_key#10){+.+.}-{4:4}, at: __sock_release+0x86/0x270 net/socket.c:646 #1: ffff888027f596a8 (&smc->clcsock_release_lock){+.+.}-{4:4}, at: smc_clcsock_release+0x75/0xe0 net/smc/smc_close.c:30 stack backtrace: CPU: 0 UID: 0 PID: 11571 Comm: syz.4.1528 Not tainted 6.14.0-rc3-syzkaller-00267-gff202c5028a1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_circular_bug+0x490/0x760 kernel/locking/lockdep.c:2076 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2208 check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ipv6_sock_ac_close+0xd9/0x110 net/ipv6/anycast.c:220 inet6_release+0x47/0x70 net/ipv6/af_inet6.c:485 __sock_release net/socket.c:647 [inline] sock_release+0x8e/0x1d0 net/socket.c:675 smc_clcsock_release+0xb7/0xe0 net/smc/smc_close.c:34 __smc_release+0x5c2/0x880 net/smc/af_smc.c:301 smc_release+0x1fc/0x5f0 net/smc/af_smc.c:344 __sock_release+0xb0/0x270 net/socket.c:647 sock_close+0x1c/0x30 net/socket.c:1398 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x27b/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8b4b38d169 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe4efd22d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000b14a3 RCX: 00007f8b4b38d169 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f8b4b5a7ba0 R08: 0000000000000001 R09: 000000114efd25cf R10: 00007f8b4b200000 R11: 0000000000000246 R12: 00007f8b4b5a5fac R13: 00007f8b4b5a5fa0 R14: ffffffffffffffff R15: 00007ffe4efd23f0 </TASK> Fixes: d25a92c ("net/smc: Introduce IPPROTO_SMC") Reported-by: syzbot+be6f4b383534d88989f7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=be6f4b383534d88989f7 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/20250407170332.26959-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 272.309774] RAX: ffffffffffffffda RBX: 000058bf9b50f6d0 RCX: 00007b9309168d39 [ 272.316905] RDX: 0000000000000000 RSI: 000058bf6c103a77 RDI: 0000000000000003 [ 272.324036] RBP: 00007fff50f1a2e0 R08: 00007fff50f19218 R09: 0000000021ec4150 [ 272.331166] R10: 000058bf9b50f7f0 R11: 0000000000000246 R12: 0000000000000000 [ 272.338296] R13: 00000000fffffffe R14: 0000000000000000 R15: 000058bf6c103a77 [ 272.345428] </TASK> [ 272.347617] Modules linked in: i2c_cros_ec_tunnel(+) [ 272.364585] gsmi: Log Shutdown Reason 0x03 Returning -EPROBE_DEFER will allow the device to be bound once the controller is bound, in the case of built-in drivers. Fixes: 9d230c9 ("i2c: ChromeOS EC tunnel driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250407-null-ec-parent-v1-1-f7dda62d3110@igalia.com
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
ktest recently reported crashes while running several buffered io tests with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack. The signature indicates an invalid address dereference with low bits of slab->obj_exts being set. The bits were outside of the range used by page_memcg_data_flags and objext_flags and hence were not masked out by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts. The typical crash log looks like this: 00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 00510 Mem abort info: 00510 ESR = 0x0000000096000045 00510 EC = 0x25: DABT (current EL), IL = 32 bits 00510 SET = 0, FnV = 0 00510 EA = 0, S1PTW = 0 00510 FSC = 0x05: level 1 translation fault 00510 Data abort info: 00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000 00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000 00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 00510 Internal error: Oops: 0000000096000045 [#1] SMP 00510 Modules linked in: 00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE 00510 Hardware name: linux,dummy-virt (DT) 00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--) 00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190 00510 lr : __kmalloc_noprof+0x150/0x310 00510 sp : ffffff80c87df6c0 00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200 00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001 00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180 00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000 00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700 00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006 00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58 00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556 00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060 00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000 00510 Call trace: 00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P) 00510 __kmalloc_noprof+0x150/0x310 00510 __bch2_folio_create+0x5c/0xf8 00510 bch2_folio_create+0x2c/0x40 00510 bch2_readahead+0xc0/0x460 00510 read_pages+0x7c/0x230 00510 page_cache_ra_order+0x244/0x3a8 00510 page_cache_async_ra+0x124/0x170 00510 filemap_readahead.isra.0+0x58/0xa0 00510 filemap_get_pages+0x454/0x7b0 00510 filemap_read+0xdc/0x418 00510 bch2_read_iter+0x100/0x1b0 00510 vfs_read+0x214/0x300 00510 ksys_read+0x6c/0x108 00510 __arm64_sys_read+0x20/0x30 00510 invoke_syscall.constprop.0+0x54/0xe8 00510 do_el0_svc+0x44/0xc8 00510 el0_svc+0x18/0x58 00510 el0t_64_sync_handler+0x104/0x130 00510 el0t_64_sync+0x154/0x158 00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881) 00510 ---[ end trace 0000000000000000 ]--- 00510 Kernel panic - not syncing: Oops: Fatal exception 00510 SMP: stopping secondary CPUs 00510 Kernel Offset: disabled 00510 CPU features: 0x0000,000000e0,00000410,8240500b 00510 Memory Limit: none Investigation indicates that these bits are already set when we allocate slab page and are not zeroed out after allocation. We are not yet sure why these crashes start happening only recently but regardless of the reason, not initializing a field that gets used later is wrong. Fix it by initializing slab->obj_exts during slab page allocation. Fixes: 21c690a ("mm: introduce slabobj_ext to support slab object extensions") Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Tested-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250411155737.1360746-1-surenb@google.com Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the kernel: [ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan] [ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT [ 31.648153] Hardware name: linux,dummy-virt (DT) [ 31.648970] Call trace: [ 31.649345] show_stack+0x18/0x24 (C) [ 31.650960] dump_stack_lvl+0x40/0x84 [ 31.651559] dump_stack+0x18/0x24 [ 31.652264] panic+0x138/0x3b4 [ 31.652812] __ktime_get_real_seconds+0x0/0x10 [ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan] [ 31.654388] init_module+0x24/0xff4 [test_ubsan] [ 31.655077] do_one_initcall+0xd4/0x280 [ 31.655680] do_init_module+0x58/0x2b4 That happens because the test corrupts other data in the stack: 400: d5384108 mrs x8, sp_el0 404: f9426d08 ldr x8, [x8, #1240] 408: f85f83a9 ldur x9, [x29, #-8] 40c: eb09011f cmp x8, x9 410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any As there is no guarantee the compiler will order the local variables as declared in the module: volatile char above[4] = { }; /* Protect surrounding memory. */ volatile int arr[4]; volatile char below[4] = { }; /* Protect surrounding memory. */ There is another problem where the out-of-bound index is 5 which is larger than the extra surrounding memory for protection. So, use a struct to enforce the ordering, and fix the index to be 4. Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR() Signed-off-by: Mostafa Saleh <smostafa@google.com> Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com Signed-off-by: Kees Cook <kees@kernel.org>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
Ido Schimmel says: ==================== fib_rules: Fix iif / oif matching on L3 master device Patch #1 fixes a recently reported regression regarding FIB rules that match on iif / oif being a VRF device. Patch #2 adds test cases to the FIB rules selftest. ==================== Link: https://patch.msgid.link/20250414172022.242991-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
…pages Alison reports an issue with fsdax when large extends end up using large ZONE_DEVICE folios: [ 417.796271] BUG: kernel NULL pointer dereference, address: 0000000000000b00 [ 417.796982] #PF: supervisor read access in kernel mode [ 417.797540] #PF: error_code(0x0000) - not-present page [ 417.798123] PGD 2a5c5067 P4D 2a5c5067 PUD 2a5c6067 PMD 0 [ 417.798690] Oops: Oops: 0000 [#1] SMP NOPTI [ 417.799178] CPU: 5 UID: 0 PID: 1515 Comm: mmap Tainted: ... [ 417.800150] Tainted: [O]=OOT_MODULE [ 417.800583] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 417.801358] RIP: 0010:__lruvec_stat_mod_folio+0x7e/0x250 [ 417.801948] Code: ... [ 417.803662] RSP: 0000:ffffc90002be3a08 EFLAGS: 00010206 [ 417.804234] RAX: 0000000000000000 RBX: 0000000000000200 RCX: 0000000000000002 [ 417.804984] RDX: ffffffff815652d7 RSI: 0000000000000000 RDI: ffffffff82a2beae [ 417.805689] RBP: ffffc90002be3a28 R08: 0000000000000000 R09: 0000000000000000 [ 417.806384] R10: ffffea0007000040 R11: ffff888376ffe000 R12: 0000000000000001 [ 417.807099] R13: 0000000000000012 R14: ffff88807fe4ab40 R15: ffff888029210580 [ 417.807801] FS: 00007f339fa7a740(0000) GS:ffff8881fa9b9000(0000) knlGS:0000000000000000 [ 417.808570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.809193] CR2: 0000000000000b00 CR3: 000000002a4f0004 CR4: 0000000000370ef0 [ 417.809925] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 417.810622] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 417.811353] Call Trace: [ 417.811709] <TASK> [ 417.812038] folio_add_file_rmap_ptes+0x143/0x230 [ 417.812566] insert_page_into_pte_locked+0x1ee/0x3c0 [ 417.813132] insert_page+0x78/0xf0 [ 417.813558] vmf_insert_page_mkwrite+0x55/0xa0 [ 417.814088] dax_fault_iter+0x484/0x7b0 [ 417.814542] dax_iomap_pte_fault+0x1ca/0x620 [ 417.815055] dax_iomap_fault+0x39/0x40 [ 417.815499] __xfs_write_fault+0x139/0x380 [ 417.815995] ? __handle_mm_fault+0x5e5/0x1a60 [ 417.816483] xfs_write_fault+0x41/0x50 [ 417.816966] xfs_filemap_fault+0x3b/0xe0 [ 417.817424] __do_fault+0x31/0x180 [ 417.817859] __handle_mm_fault+0xee1/0x1a60 [ 417.818325] ? debug_smp_processor_id+0x17/0x20 [ 417.818844] handle_mm_fault+0xe1/0x2b0 [...] The issue is that when we split a large ZONE_DEVICE folio to order-0 ones, we don't reset the order/_nr_pages. As folio->_nr_pages overlays page[1]->memcg_data, once page[1] is a folio, it suddenly looks like it has folio->memcg_data set. And we never manually initialize folio->memcg_data in fsdax code, because we never expect it to be set at all. When __lruvec_stat_mod_folio() then stumbles over such a folio, it tries to use folio->memcg_data (because it's non-NULL) but it does not actually point at a memcg, resulting in the problem. Alison also observed that these folios sometimes have "locked" set, which is rather concerning (folios locked from the beginning ...). The reason is that the order for large folios is stored in page[1]->flags, which become the folio->flags of a new small folio. Let's fix it by adding a folio helper to clear order/_nr_pages for splitting purposes. Maybe we should reinitialize other large folio flags / folio members as well when splitting, because they might similarly cause harm once page[1] becomes a folio? At least other flags in PAGE_FLAGS_SECOND should not be set for fsdax, so at least page[1]->flags might be as expected with this fix. From a quick glimpse, initializing ->mapping, ->pgmap and ->share should re-initialize most things from a previous page[1] used by large folios that fsdax cares about. For example folio->private might not get reinitialized, but maybe that's not relevant -- no traces of it's use in fsdax code. Needs a closer look. Another thing that should be considered in the future is performing similar checks as we perform in free_tail_page_prepare() -- checking pincount etc. -- when freeing a large fsdax folio. Link: https://lkml.kernel.org/r/20250410091020.119116-1-david@redhat.com Fixes: 4996fc5 ("mm: let _folio_nr_pages overlay memcg_data in first tail page") Fixes: 38607c6 ("fs/dax: properly refcount fs dax pages") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Alison Schofield <alison.schofield@intel.com> Closes: https://lkml.kernel.org/r/Z_W9Oeg-D9FhImf3@aschofie-mobl2.lan Tested-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: "Darrick J. Wong" <djwong@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shashim-quic
pushed a commit
that referenced
this pull request
Apr 24, 2025
Communicating with the hypervisor using the shared GHCB page requires clearing the C bit in the mapping of that page. When executing in the context of the EFI boot services, the page tables are owned by the firmware, and this manipulation is not possible. So switch to a different API for accepting memory in SEV-SNP guests, one which is actually supported at the point during boot where the EFI stub may need to accept memory, but the SEV-SNP init code has not executed yet. For simplicity, also switch the memory acceptance carried out by the decompressor when not booting via EFI - this only involves the allocation for the decompressed kernel, and is generally only called after kexec, as normal boot will jump straight into the kernel from the EFI stub. Fixes: 6c32117 ("x86/sev: Add SNP-specific unaccepted memory support") Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Cc: Dionna Amalie Glaze <dionnaglaze@google.com> Cc: Kevin Loughlin <kevinloughlin@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-efi@vger.kernel.org Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1 Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2 Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
shashim-quic
pushed a commit
that referenced
this pull request
May 16, 2025
A vmemmap altmap is a device-provided region used to provide backing storage for struct pages. For each namespace, the altmap should belong to that same namespace. If the namespaces are created unaligned, there is a chance that the section vmemmap start address could also be unaligned. If the section vmemmap start address is unaligned, the altmap page allocated from the current namespace might be used by the previous namespace also. During the free operation, since the altmap is shared between two namespaces, the previous namespace may detect that the page does not belong to its altmap and incorrectly assume that the page is a normal page. It then attempts to free the normal page, which leads to a kernel crash. Kernel attempted to read user page (18) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000018 Faulting instruction address: 0xc000000000530c7c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G W NIP: c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe REGS: c000000015e57040 TRAP: 0300 Tainted: G W MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 84482404 CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0 GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040 GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000 GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020 GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00 GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040 NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0 LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0 Call Trace: free_unref_page+0x50/0x1e0 free_reserved_page+0x40/0x68 free_vmemmap_pages+0x98/0xe0 remove_pte_table+0x164/0x1e8 remove_pmd_table+0x204/0x2c8 remove_pud_table+0x1c4/0x288 remove_pagetable+0x1c8/0x310 vmemmap_free+0x24/0x50 section_deactivate+0x28c/0x2a0 __remove_pages+0x84/0x110 arch_remove_memory+0x38/0x60 memunmap_pages+0x18c/0x3d0 devm_action_release+0x30/0x50 release_nodes+0x68/0x140 devres_release_group+0x100/0x190 dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat] device_for_each_child+0x8c/0x100 [dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat] nvdimm_bus_remove+0x78/0x140 [libnvdimm] device_remove+0x70/0xd0 Another issue is that if there is no altmap, a PMD-sized vmemmap page will be allocated from RAM, regardless of the alignment of the section start address. If the section start address is not aligned to the PMD size, a VM_BUG_ON will be triggered when setting the PMD-sized page to page table. In this patch, we are aligning the section vmemmap start address to PAGE_SIZE. After alignment, the start address will not be part of the current namespace, and a normal page will be allocated for the vmemmap mapping of the current section. For the remaining sections, altmaps will be allocated. During the free operation, the normal page will be correctly freed. In the same way, a PMD_SIZE vmemmap page will be allocated only if the section start address is PMD_SIZE-aligned; otherwise, it will fall back to a PAGE-sized vmemmap allocation. Without this patch ================== NS1 start NS2 start _________________________________________________________ | NS1 | NS2 | --------------------------------------------------------- | Altmap| Altmap | .....|Altmap| Altmap | ........... | NS1 | NS1 | | NS2 | NS2 | In the above scenario, NS1 and NS2 are two namespaces. The vmemmap for NS1 comes from Altmap NS1, which belongs to NS1, and the vmemmap for NS2 comes from Altmap NS2, which belongs to NS2. The vmemmap start for NS2 is not aligned, so Altmap NS2 is shared by both NS1 and NS2. During the free operation in NS1, Altmap NS2 is not part of NS1's altmap, causing it to attempt to free an invalid page. With this patch =============== NS1 start NS2 start _________________________________________________________ | NS1 | NS2 | --------------------------------------------------------- | Altmap| Altmap | .....| Normal | Altmap | Altmap |....... | NS1 | NS1 | | Page | NS2 | NS2 | If the vmemmap start for NS2 is not aligned then we are allocating a normal page. NS1 and NS2 vmemmap will be freed correctly. Fixes: 368a059 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function") Co-developed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/8f98ec2b442977c618f7256cec88eb17dde3f2b9.1741609795.git.donettom@linux.ibm.com
shashim-quic
pushed a commit
that referenced
this pull request
May 16, 2025
for_each_present_section_nr() was introduced to add_boot_memory_block() by commit 61659ef ("drivers/base/memory: improve add_boot_memory_block()"). It causes unnecessary overhead when the present sections are really sparse. next_present_section_nr() called by the macro to find the next present section, which is far away from the spanning sections in the specified block. Too much time consumed by next_present_section_nr() in this case, which can lead to softlockup as observed by Aditya Gupta on IBM Power10 machine. watchdog: BUG: soft lockup - CPU#248 stuck for 22s! [swapper/248:1] Modules linked in: CPU: 248 UID: 0 PID: 1 Comm: swapper/248 Not tainted 6.15.0-rc1-next-20250408 #1 VOLUNTARY Hardware name: 9105-22A POWER10 (raw) 0x800200 opal:v7.1-107-gfda75d121942 PowerNV NIP: c00000000209218c LR: c000000002092204 CTR: 0000000000000000 REGS: c00040000418fa30 TRAP: 0900 Not tainted (6.15.0-rc1-next-20250408) MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28000428 XER: 00000000 CFAR: 0000000000000000 IRQMASK: 0 GPR00: c000000002092204 c00040000418fcd0 c000000001b08100 0000000000000040 GPR04: 0000000000013e00 c000c03ffebabb00 0000000000c03fff c000400fff587f80 GPR08: 0000000000000000 00000000001196f7 0000000000000000 0000000028000428 GPR12: 0000000000000000 c000000002e80000 c00000000001007c 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR28: c000000002df7f70 0000000000013dc0 c0000000011dd898 0000000008000000 NIP [c00000000209218c] memory_dev_init+0x114/0x1e0 LR [c000000002092204] memory_dev_init+0x18c/0x1e0 Call Trace: [c00040000418fcd0] [c000000002092204] memory_dev_init+0x18c/0x1e0 (unreliable) [c00040000418fd50] [c000000002091348] driver_init+0x78/0xa4 [c00040000418fd70] [c0000000020063ac] kernel_init_freeable+0x22c/0x370 [c00040000418fde0] [c0000000000100a8] kernel_init+0x34/0x25c [c00040000418fe50] [c00000000000cd94] ret_from_kernel_user_thread+0x14/0x1c Avoid the overhead by folding for_each_present_section_nr() to the outer loop. add_boot_memory_block() is dropped after that. Fixes: 61659ef ("drivers/base/memory: improve add_boot_memory_block()") Closes: https://lore.kernel.org/linux-mm/20250409180344.477916-1-adityag@linux.ibm.com Reported-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Tested-by: Aditya Gupta <adityag@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20250410125110.1232329-1-gshan@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shashim-quic
pushed a commit
that referenced
this pull request
May 16, 2025
There was a bug report about a NULL pointer dereference in __btrfs_add_free_space_zoned() that ultimately happens because a conversion from the default metadata profile DUP to a RAID1 profile on two disks. The stack trace has the following signature: BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__btrfs_add_free_space_zoned.isra.0+0x61/0x1a0 RSP: 0018:ffffa236b6f3f6d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff96c8132f3400 RCX: 0000000000000001 RDX: 0000000010000000 RSI: 0000000000000000 RDI: ffff96c8132f3410 RBP: 0000000010000000 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: ffff96c758f65a40 R14: 0000000000000001 R15: 000011aac0000000 FS: 00007fdab1cb2900(0000) GS:ffff96e60ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 00000001a05ae000 CR4: 0000000000350ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15c/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? __btrfs_add_free_space_zoned.isra.0+0x61/0x1a0 btrfs_add_free_space_async_trimmed+0x34/0x40 btrfs_add_new_free_space+0x107/0x120 btrfs_make_block_group+0x104/0x2b0 btrfs_create_chunk+0x977/0xf20 btrfs_chunk_alloc+0x174/0x510 ? srso_return_thunk+0x5/0x5f btrfs_inc_block_group_ro+0x1b1/0x230 btrfs_relocate_block_group+0x9e/0x410 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x8ac/0x12b0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? __kmalloc_cache_noprof+0x14c/0x3e0 btrfs_ioctl+0x2686/0x2a80 ? srso_return_thunk+0x5/0x5f ? ioctl_has_perm.constprop.0.isra.0+0xd2/0x120 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x82/0x160 ? srso_return_thunk+0x5/0x5f ? __memcg_slab_free_hook+0x11a/0x170 ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x3f0/0x450 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? syscall_exit_to_user_mode+0x10/0x210 ? srso_return_thunk+0x5/0x5f ? do_syscall_64+0x8e/0x160 ? sysfs_emit+0xaf/0xc0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? seq_read_iter+0x207/0x460 ? srso_return_thunk+0x5/0x5f ? vfs_read+0x29c/0x370 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? syscall_exit_to_user_mode+0x10/0x210 ? srso_return_thunk+0x5/0x5f ? do_syscall_64+0x8e/0x160 ? srso_return_thunk+0x5/0x5f ? exc_page_fault+0x7e/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fdab1e0ca6d RSP: 002b:00007ffeb2b60c80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdab1e0ca6d RDX: 00007ffeb2b60d80 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 00007ffeb2b60cd0 R08: 0000000000000000 R09: 0000000000000013 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffeb2b6343b R14: 00007ffeb2b60d80 R15: 0000000000000001 </TASK> CR2: 0000000000000058 ---[ end trace 0000000000000000 ]--- The 1st line is the most interesting here: BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile When a RAID1 block-group is created and a write pointer mismatch between the disks in the RAID set is detected, btrfs sets the alloc_offset to the length of the block group marking it as full. Afterwards the code expects that a balance operation will evacuate the data in this block-group and repair the problems. But before this is possible, the new space of this block-group will be accounted in the free space cache. But in __btrfs_add_free_space_zoned() it is being checked if it is a initial creation of a block group and if not a reclaim decision will be made. But the decision if a block-group's free space accounting is done for an initial creation depends on if the size of the added free space is the whole length of the block-group and the allocation offset is 0. But as btrfs_load_block_group_zone_info() sets the allocation offset to the zone capacity (i.e. marking the block-group as full) this initial decision is not met, and the space_info pointer in the 'struct btrfs_block_group' has not yet been assigned. Fail creation of the block group and rely on manual user intervention to re-balance the filesystem. Afterwards the filesystem can be unmounted, mounted in degraded mode and the missing device can be removed after a full balance of the filesystem. Reported-by: 西木野羰基 <yanqiyu01@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAB_b4sBhDe3tscz=duVyhc9hNE+gu=B8CrgLO152uMyanR8BEA@mail.gmail.com/ Fixes: b1934cd ("btrfs: zoned: handle broken write pointer on zones") Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
shashim-quic
pushed a commit
that referenced
this pull request
May 16, 2025
If we have a failure at create_reloc_inode(), under the 'out' label we
assign an error pointer to the 'inode' variable and then return a weird
pointer because we return the expression "&inode->vfs_inode":
static noinline_for_stack struct inode *create_reloc_inode(
const struct btrfs_block_group *group)
{
(...)
out:
(...)
if (ret) {
if (inode)
iput(&inode->vfs_inode);
inode = ERR_PTR(ret);
}
return &inode->vfs_inode;
}
This can make us return a pointer that is not an error pointer and make
the caller proceed as if an error didn't happen and later result in an
invalid memory access when dereferencing the inode pointer.
Syzbot reported reported such a case with the following stack trace:
R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 431bde82d7b634db R15: 00007ffc55de5790
</TASK>
BTRFS info (device loop0): relocating block group 6881280 flags data|metadata
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000045: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000228-0x000000000000022f]
CPU: 0 UID: 0 PID: 5332 Comm: syz-executor215 Not tainted 6.14.0-syzkaller-13423-ga8662bcd2ff1 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:relocate_file_extent_cluster+0xe7/0x1750 fs/btrfs/relocation.c:2971
Code: 00 74 08 (...)
RSP: 0018:ffffc9000d3375e0 EFLAGS: 00010203
RAX: 0000000000000045 RBX: 000000000000022c RCX: ffff888000562440
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880452db000
RBP: ffffc9000d337870 R08: ffffffff84089251 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffff9368a020 R14: 0000000000000394 R15: ffff8880452db000
FS: 000055558bc7b380(0000) GS:ffff88808c596000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a7a192e740 CR3: 0000000036e2e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
relocate_block_group+0xa1e/0xd50 fs/btrfs/relocation.c:3657
btrfs_relocate_block_group+0x777/0xd80 fs/btrfs/relocation.c:4011
btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3511
__btrfs_balance+0x1a93/0x25e0 fs/btrfs/volumes.c:4292
btrfs_balance+0xbde/0x10c0 fs/btrfs/volumes.c:4669
btrfs_ioctl_balance+0x3f5/0x660 fs/btrfs/ioctl.c:3586
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb4ef537dd9
Code: 28 00 00 (...)
RSP: 002b:00007ffc55de5728 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffc55de5750 RCX: 00007fb4ef537dd9
RDX: 0000200000000440 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 0000000000000002 R08: 00007ffc55de54c6 R09: 00007ffc55de5770
R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 431bde82d7b634db R15: 00007ffc55de5790
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:relocate_file_extent_cluster+0xe7/0x1750 fs/btrfs/relocation.c:2971
Code: 00 74 08 (...)
RSP: 0018:ffffc9000d3375e0 EFLAGS: 00010203
RAX: 0000000000000045 RBX: 000000000000022c RCX: ffff888000562440
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880452db000
RBP: ffffc9000d337870 R08: ffffffff84089251 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffff9368a020 R14: 0000000000000394 R15: ffff8880452db000
FS: 000055558bc7b380(0000) GS:ffff88808c596000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a7a192e740 CR3: 0000000036e2e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
----------------
Code disassembly (best guess):
0: 00 74 08 48 add %dh,0x48(%rax,%rcx,1)
4: 89 df mov %ebx,%edi
6: e8 f8 36 24 fe call 0xfe243703
b: 48 89 9c 24 30 01 00 mov %rbx,0x130(%rsp)
12: 00
13: 4c 89 74 24 28 mov %r14,0x28(%rsp)
18: 4d 8b 76 10 mov 0x10(%r14),%r14
1c: 49 8d 9e 98 fe ff ff lea -0x168(%r14),%rbx
23: 48 89 d8 mov %rbx,%rax
26: 48 c1 e8 03 shr $0x3,%rax
* 2a: 42 80 3c 20 00 cmpb $0x0,(%rax,%r12,1) <-- trapping instruction
2f: 74 08 je 0x39
31: 48 89 df mov %rbx,%rdi
34: e8 ca 36 24 fe call 0xfe243703
39: 4c 8b 3b mov (%rbx),%r15
3c: 48 rex.W
3d: 8b .byte 0x8b
3e: 44 rex.R
3f: 24 .byte 0x24
So fix this by returning the error immediately.
Reported-by: syzbot+7481815bb47ef3e702e2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/67f14ee9.050a0220.0a13.023e.GAE@google.com/
Fixes: b204e5c ("btrfs: make btrfs_iget() return a btrfs inode instead")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
When mana_serv_reset() encounters -ETIMEDOUT or -EPROTO from mana_gd_resume(), it performs a PCI rescan via mana_serv_rescan(). mana_serv_rescan() calls pci_stop_and_remove_bus_device(), which can invoke the driver's remove path and free the gdma_context associated with the device. After returning, mana_serv_reset() currently jumps to the out label and attempts to clear gc->in_service, dereferencing a freed gdma_context. The issue was observed with the following call logs: [ 698.942636] BUG: unable to handle page fault for address: ff6c2b638088508d [ 698.943121] #PF: supervisor write access in kernel mode [ 698.943423] #PF: error_code(0x0002) - not-present page [S[ 698.943793] Pat Dec 6 07:GD5 100000067 P4D 1002f7067 PUD 1002f8067 PMD 101bef067 PTE 0 0:56 2025] hv_[n e 698.944283] Oops: Oops: 0002 [#1] SMP NOPTI tvsc f8615163-00[ 698.944611] CPU: 28 UID: 0 PID: 249 Comm: kworker/28:1 ... [Sat Dec 6 07:50:56 2025] R10: [ 699.121594] mana 7870:00:00.0 enP30832s1: Configured vPort 0 PD 18 DB 16 000000000000001b R11: 0000000000000000 R12: ff44cf3f40270000 [Sat Dec 6 07:50:56 2025] R13: 0000000000000001 R14: ff44cf3f402700c8 R15: ff44cf3f4021b405 [Sat Dec 6 07:50:56 2025] FS: 0000000000000000(0000) GS:ff44cf7e9fcf9000(0000) knlGS:0000000000000000 [Sat Dec 6 07:50:56 2025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Sat Dec 6 07:50:56 2025] CR2: ff6c2b638088508d CR3: 000000011fe43001 CR4: 0000000000b73ef0 [Sat Dec 6 07:50:56 2025] Call Trace: [Sat Dec 6 07:50:56 2025] <TASK> [Sat Dec 6 07:50:56 2025] mana_serv_func+0x24/0x50 [mana] [Sat Dec 6 07:50:56 2025] process_one_work+0x190/0x350 [Sat Dec 6 07:50:56 2025] worker_thread+0x2b7/0x3d0 [Sat Dec 6 07:50:56 2025] kthread+0xf3/0x200 [Sat Dec 6 07:50:56 2025] ? __pfx_worker_thread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ret_from_fork+0x21a/0x250 [Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ret_from_fork_asm+0x1a/0x30 [Sat Dec 6 07:50:56 2025] </TASK> Fix this by returning immediately after mana_serv_rescan() to avoid accessing GC state that may no longer be valid. Fixes: 9bf6603 ("net: mana: Handle hardware recovery events when probing the device") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20251218131054.GA3173@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
There is a crash issue when running zero copy XDP_TX action, the crash log is shown below. [ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000 [ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP [ 216.301694] Call trace: [ 216.304130] dcache_clean_poc+0x20/0x38 (P) [ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0 [ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400 [ 216.317701] __stmmac_xdp_run_prog+0x164/0x368 [ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00 [ 216.326576] __napi_poll+0x40/0x218 [ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt For XDP_TX action, the xdp_buff is converted to xdp_frame by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the memory type and always uses the page pool type, this leads to invalid mappings and causes the crash. Therefore, check the xdp_buff memory type in stmmac_xdp_xmit_back() to fix this issue. Fixes: bba2556 ("net: stmmac: Enable RX via AF_XDP zero-copy") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20251204071332.1907111-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
syzbot reported a crash [1] in dql_completed() after recent usbnet BQL adoption. The reason for the crash is that netdev_reset_queue() is called too soon. It should be called after cancel_work_sync(&dev->bh_work) to make sure no more TX completion can happen. [1] kernel BUG at lib/dynamic_queue_limits.c:99 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 5197 Comm: udevd Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:dql_completed+0xbe1/0xbf0 lib/dynamic_queue_limits.c:99 Call Trace: <IRQ> netdev_tx_completed_queue include/linux/netdevice.h:3864 [inline] netdev_completed_queue include/linux/netdevice.h:3894 [inline] usbnet_bh+0x793/0x1020 drivers/net/usb/usbnet.c:1601 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 bh_worker+0x2b1/0x600 kernel/workqueue.c:3611 tasklet_action+0xc/0x70 kernel/softirq.c:952 handle_softirqs+0x27d/0x850 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] invoke_softirq kernel/softirq.c:496 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:723 irq_exit_rcu+0x9/0x30 kernel/softirq.c:739 Fixes: 7ff14c5 ("usbnet: Add support for Byte Queue Limits (BQL)") Reported-by: syzbot+5b55e49f8bbd84631a9c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6945644f.a70a0220.207337.0113.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Simon Schippers <simon.schippers@tu-dortmund.de> Link: https://patch.msgid.link/20251219144459.692715-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
… to macb_open() In the non-RT kernel, local_bh_disable() merely disables preemption, whereas it maps to an actual spin lock in the RT kernel. Consequently, when attempting to refill RX buffers via netdev_alloc_skb() in macb_mac_link_up(), a deadlock scenario arises as follows: WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e #39 Not tainted ------------------------------------------------------ kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit +0x148/0xb7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&queue->tx_ptr_lock){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x148/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #2 (_xmit_ETHER#2){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 sch_direct_xmit+0x11c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #1 ((softirq_ctrl.lock)){+.+.}-{3:3}: lock_release+0x250/0x348 __local_bh_enable_ip+0x7c/0x240 __netdev_alloc_skb+0x1b4/0x1d8 gem_rx_refill+0xdc/0x240 gem_init_rings+0xb4/0x108 macb_mac_link_up+0x9c/0x2b4 phylink_resolve+0x170/0x614 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #0 (&bp->lock){+.+.}-{3:3}: __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &bp->lock --> _xmit_ETHER#2 --> &queue->tx_ptr_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&queue->tx_ptr_lock); lock(_xmit_ETHER#2); lock(&queue->tx_ptr_lock); lock(&bp->lock); *** DEADLOCK *** Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0xa0/0xf0 dump_stack+0x18/0x24 print_circular_bug+0x28c/0x370 check_noncircular+0x198/0x1ac __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 Notably, invoking the mog_init_rings() callback upon link establishment is unnecessary. Instead, we can exclusively call mog_init_rings() within the ndo_open() callback. This adjustment resolves the deadlock issue. Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings() when opening the network interface via at91ether_open(), moving mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC check. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Cc: stable@vger.kernel.org Suggested-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://patch.msgid.link/20251222015624.1994551-1-xiaolei.wang@windriver.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
This reverts commit f804a58. This change introduced the following panic, and mt792x_load_firmware() fails. wifi is dead on systems with mt792x wireless. kern :crit : kernel BUG at lib/string_helpers.c:1043! kern :warn : Oops: invalid opcode: 0000 [#1] SMP NOPTI kern :warn : CPU: 14 UID: 0 PID: 61 Comm: kworker/14:0 Tainted: G W 6.19.0-rc1 #1 PREEMPT(voluntary) kern :warn : Tainted: [W]=WARN kern :warn : Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP07, BIOS 03.16 07/25/2025 kern :warn : Workqueue: events mt7921_init_work [mt7921_common] kern :warn : RIP: 0010:__fortify_panic+0xd/0xf kern :warn : Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 40 0f b6 ff e8 c3 55 71 00 <0f> 0b 48 8b 54 24 10 48 8b 74 24 08 4c 89 e9 48 c7 c7 00 a2 d5 a0 kern :warn : RSP: 0018:ffffa7a5c03a3d10 EFLAGS: 00010246 kern :warn : RAX: ffffffffa0d7aaf2 RBX: 0000000000000000 RCX: ffffffffa0d7aaf2 kern :warn : RDX: 0000000000000011 RSI: ffffffffa0d5a170 RDI: ffffffffa128db10 kern :warn : RBP: ffff91650ae52060 R08: 0000000000000010 R09: ffffa7a5c31b2000 kern :warn : R10: ffffa7a5c03a3bf0 R11: 00000000ffffffff R12: 0000000000000000 kern :warn : R13: ffffa7a5c31b2000 R14: 0000000000001000 R15: 0000000000000000 kern :warn : FS: 0000000000000000(0000) GS:ffff91743e664000(0000) knlGS:0000000000000000 kern :warn : CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kern :warn : CR2: 00007f10786c241c CR3: 00000003eca24000 CR4: 0000000000f50ef0 kern :warn : PKRU: 55555554 kern :warn : Call Trace: kern :warn : <TASK> kern :warn : mt76_connac2_load_patch.cold+0x2b/0xa41 [mt76_connac_lib] kern :warn : ? srso_alias_return_thunk+0x5/0xfbef5 kern :warn : mt792x_load_firmware+0x36/0x150 [mt792x_lib] kern :warn : mt7921_run_firmware+0x2c/0x4a0 [mt7921_common] kern :warn : ? srso_alias_return_thunk+0x5/0xfbef5 kern :warn : ? mt7921_rr+0x12/0x30 [mt7921e] kern :warn : ? srso_alias_return_thunk+0x5/0xfbef5 kern :warn : ? ____mt76_poll_msec+0x75/0xb0 [mt76] kern :warn : mt7921e_mcu_init+0x4c/0x7a [mt7921e] kern :warn : mt7921_init_work+0x51/0x190 [mt7921_common] kern :warn : process_one_work+0x18b/0x340 kern :warn : worker_thread+0x256/0x3a0 kern :warn : ? __pfx_worker_thread+0x10/0x10 kern :warn : kthread+0xfc/0x240 kern :warn : ? __pfx_kthread+0x10/0x10 kern :warn : ? __pfx_kthread+0x10/0x10 kern :warn : ret_from_fork+0x254/0x290 kern :warn : ? __pfx_kthread+0x10/0x10 kern :warn : ret_from_fork_asm+0x1a/0x30 kern :warn : </TASK> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
ctx->tcxt_list holds the tasks using this ring, and it's currently
protected by the normal ctx->uring_lock. However, this can cause a
circular locking issue, as reported by syzbot, where cancelations off
exec end up needing to remove an entry from this list:
======================================================
WARNING: possible circular locking dependency detected
syzkaller #0 Tainted: G L
------------------------------------------------------
syz.0.9999/12287 is trying to acquire lock:
ffff88805851c0a8 (&ctx->uring_lock){+.+.}-{4:4}, at: io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
but task is already holding lock:
ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: prepare_bprm_creds fs/exec.c:1360 [inline]
ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: bprm_execve+0xb9/0x1400 fs/exec.c:1733
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&sig->cred_guard_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
proc_pid_attr_write+0x547/0x630 fs/proc/base.c:2837
vfs_write+0x27e/0xb30 fs/read_write.c:684
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 (sb_writers#3){.+.+}-{0:0}:
percpu_down_read_internal include/linux/percpu-rwsem.h:53 [inline]
percpu_down_read_freezable include/linux/percpu-rwsem.h:83 [inline]
__sb_start_write include/linux/fs/super.h:19 [inline]
sb_start_write+0x4d/0x1c0 include/linux/fs/super.h:125
mnt_want_write+0x41/0x90 fs/namespace.c:499
open_last_lookups fs/namei.c:4529 [inline]
path_openat+0xadd/0x3dd0 fs/namei.c:4784
do_filp_open+0x1fa/0x410 fs/namei.c:4814
io_openat2+0x3e0/0x5c0 io_uring/openclose.c:143
__io_issue_sqe+0x181/0x4b0 io_uring/io_uring.c:1792
io_issue_sqe+0x165/0x1060 io_uring/io_uring.c:1815
io_queue_sqe io_uring/io_uring.c:2042 [inline]
io_submit_sqe io_uring/io_uring.c:2320 [inline]
io_submit_sqes+0xbf4/0x2140 io_uring/io_uring.c:2434
__do_sys_io_uring_enter io_uring/io_uring.c:3280 [inline]
__se_sys_io_uring_enter+0x2e0/0x2b60 io_uring/io_uring.c:3219
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&ctx->uring_lock){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x15a6/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x107/0x340 kernel/locking/lockdep.c:5868
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
io_uring_clean_tctx+0xd4/0x1a0 io_uring/tctx.c:195
io_uring_cancel_generic+0x6ca/0x7d0 io_uring/cancel.c:646
io_uring_task_cancel include/linux/io_uring.h:24 [inline]
begin_new_exec+0x10ed/0x2440 fs/exec.c:1131
load_elf_binary+0x9f8/0x2d70 fs/binfmt_elf.c:1010
search_binary_handler fs/exec.c:1669 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve+0x92e/0x1400 fs/exec.c:1753
do_execveat_common+0x510/0x6a0 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x94/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Chain exists of:
&ctx->uring_lock --> sb_writers#3 --> &sig->cred_guard_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sig->cred_guard_mutex);
lock(sb_writers#3);
lock(&sig->cred_guard_mutex);
lock(&ctx->uring_lock);
*** DEADLOCK ***
1 lock held by syz.0.9999/12287:
#0: ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: prepare_bprm_creds fs/exec.c:1360 [inline]
#0: ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: bprm_execve+0xb9/0x1400 fs/exec.c:1733
stack backtrace:
CPU: 0 UID: 0 PID: 12287 Comm: syz.0.9999 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_circular_bug+0x2e2/0x300 kernel/locking/lockdep.c:2043
check_noncircular+0x12e/0x150 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x15a6/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x107/0x340 kernel/locking/lockdep.c:5868
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
io_uring_clean_tctx+0xd4/0x1a0 io_uring/tctx.c:195
io_uring_cancel_generic+0x6ca/0x7d0 io_uring/cancel.c:646
io_uring_task_cancel include/linux/io_uring.h:24 [inline]
begin_new_exec+0x10ed/0x2440 fs/exec.c:1131
load_elf_binary+0x9f8/0x2d70 fs/binfmt_elf.c:1010
search_binary_handler fs/exec.c:1669 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve+0x92e/0x1400 fs/exec.c:1753
do_execveat_common+0x510/0x6a0 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x94/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff3a8b8f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ff3a9a97038 EFLAGS: 00000246 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 00007ff3a8de5fa0 RCX: 00007ff3a8b8f749
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000400
RBP: 00007ff3a8c13f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ff3a8de6038 R14: 00007ff3a8de5fa0 R15: 00007ff3a8f0fa28
</TASK>
Add a separate lock just for the tctx_list, tctx_lock. This can nest
under ->uring_lock, where necessary, and be used separately for list
manipulation. For the cancelation off exec side, this removes the
need to grab ->uring_lock, hence fixing the circular locking
dependency.
Reported-by: syzbot+b0e3b77ffaa8a4067ce5@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
irdma_net_event() should not dereference anything from "neigh" (alias "ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE. Other events come with different structures pointed to by "ptr" and they may be smaller than struct neighbour. Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case. The bug is mostly harmless, but it triggers KASAN on debug kernels: BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma] Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554 CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1 Hardware name: [...] Workqueue: events rt6_probe_deferred Call Trace: <IRQ> dump_stack_lvl+0x60/0xb0 print_address_description.constprop.0+0x2c/0x3f0 print_report+0xb4/0x270 kasan_report+0x92/0xc0 irdma_net_event+0x32e/0x3b0 [irdma] notifier_call_chain+0x9e/0x180 atomic_notifier_call_chain+0x5c/0x110 rt6_do_redirect+0xb91/0x1080 tcp_v6_err+0xe9b/0x13e0 icmpv6_notify+0x2b2/0x630 ndisc_redirect_rcv+0x328/0x530 icmpv6_rcv+0xc16/0x1360 ip6_protocol_deliver_rcu+0xb84/0x12e0 ip6_input_finish+0x117/0x240 ip6_input+0xc4/0x370 ipv6_rcv+0x420/0x7d0 __netif_receive_skb_one_core+0x118/0x1b0 process_backlog+0xd1/0x5d0 __napi_poll.constprop.0+0xa3/0x440 net_rx_action+0x78a/0xba0 handle_softirqs+0x2d4/0x9c0 do_softirq+0xad/0xe0 </IRQ> Fixes: 915cc7a ("RDMA/irdma: Add miscellaneous utility definitions") Link: https://patch.msgid.link/r/20251127143150.121099-1-mschmidt@redhat.com Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
skbuff_fclone_cache was created without defining a usercopy region, [1] unlike skbuff_head_cache which properly whitelists the cb[] field. [2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is enabled and the kernel attempts to copy sk_buff.cb data to userspace via sock_recv_errqueue() -> put_cmsg(). The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1] 2. The skb is cloned via skb_clone() using the pre-allocated fclone [3] 3. The cloned skb is queued to sk_error_queue for timestamp reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE) 5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb [4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5] When cloned skbs allocated from skbuff_fclone_cache are used in the socket error queue, accessing the sock_exterr_skb structure in skb->cb via put_cmsg() triggers a usercopy hardening violation: [ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)! [ 5.382796] kernel BUG at mm/usercopy.c:102! [ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7 [ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80 [ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490 [ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246 [ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74 [ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0 [ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74 [ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001 [ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00 [ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000 [ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0 [ 5.384903] PKRU: 55555554 [ 5.384903] Call Trace: [ 5.384903] <TASK> [ 5.384903] __check_heap_object+0x9a/0xd0 [ 5.384903] __check_object_size+0x46c/0x690 [ 5.384903] put_cmsg+0x129/0x5e0 [ 5.384903] sock_recv_errqueue+0x22f/0x380 [ 5.384903] tls_sw_recvmsg+0x7ed/0x1960 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? schedule+0x6d/0x270 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? mutex_unlock+0x81/0xd0 [ 5.384903] ? __pfx_mutex_unlock+0x10/0x10 [ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10 [ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0 [ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee) This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure. [1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885 [2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104 [3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566 [4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491 [5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719 Fixes: 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251223203534.1392218-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
Fix assert lock warning while calling devl_param_driverinit_value_set() in ena. WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9 CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy) Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017 Workqueue: events work_for_cpu_fn RIP: 0010:devl_assert_locked+0x62/0x90 Call Trace: <TASK> devl_param_driverinit_value_set+0x15/0x1c0 ena_devlink_alloc+0x18c/0x220 [ena] ? __pfx_ena_devlink_alloc+0x10/0x10 [ena] ? trace_hardirqs_on+0x18/0x140 ? lockdep_hardirqs_on+0x8c/0x130 ? __raw_spin_unlock_irqrestore+0x5d/0x80 ? __raw_spin_unlock_irqrestore+0x46/0x80 ? devm_ioremap_wc+0x9a/0xd0 ena_probe+0x4d2/0x1b20 [ena] ? __lock_acquire+0x56a/0xbd0 ? __pfx_ena_probe+0x10/0x10 [ena] ? local_clock+0x15/0x30 ? __lock_release.isra.0+0x1c9/0x340 ? mark_held_locks+0x40/0x70 ? lockdep_hardirqs_on_prepare.part.0+0x92/0x170 ? trace_hardirqs_on+0x18/0x140 ? lockdep_hardirqs_on+0x8c/0x130 ? __raw_spin_unlock_irqrestore+0x5d/0x80 ? __raw_spin_unlock_irqrestore+0x46/0x80 ? __pfx_ena_probe+0x10/0x10 [ena] ...... </TASK> Fixes: 816b526 ("net: ena: Control PHC enable through devlink") Signed-off-by: Frank Liang <xiliang@redhat.com> Reviewed-by: David Arinzon <darinzon@amazon.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20251231145808.6103-1-xiliang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
…te in qfq_reset `qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class itself is active. Two qfq_class objects may point to the same leaf_qdisc. This happens when: 1. one QFQ qdisc is attached to the dev as the root qdisc, and 2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get() / qdisc_put()) and is pending to be destroyed, as in function tc_new_tfilter. When packets are enqueued through the root QFQ qdisc, the shared leaf_qdisc->q.qlen increases. At the same time, the second QFQ qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters qfq_reset() with its own q->q.qlen == 0, but its class's leaf qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate an inactive aggregate and trigger a null-deref in qfq_deactivate_agg: [ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 0.903571] #PF: supervisor write access in kernel mode [ 0.903860] #PF: error_code(0x0002) - not-present page [ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0 [ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI [ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE [ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.910247] PKRU: 55555554 [ 0.910391] Call Trace: [ 0.910527] <TASK> [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485) [ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036) [ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076) [ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447) [ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) [ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861) [ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550) [ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) [ 0.912296] ? __alloc_skb (net/core/skbuff.c:706) [ 0.912484] netlink_sendmsg (net/netlink/af_netlink.c:1894) [ 0.912682] sock_write_iter (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1) net/socket.c:1195 (discriminator 1)) [ 0.912880] vfs_write (fs/read_write.c:593 fs/read_write.c:686) [ 0.913077] ksys_write (fs/read_write.c:738) [ 0.913252] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 0.913438] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) [ 0.913687] RIP: 0033:0x424c34 [ 0.913844] Code: 89 02 48 c7 c0 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d 2d 44 09 00 00 74 13 b8 01 00 00 00 0f 05 9 Code starting with the faulting instruction =========================================== 0: 89 02 mov %eax,(%rdx) 2: 48 c7 c0 ff ff ff ff mov $0xffffffffffffffff,%rax 9: eb bd jmp 0xffffffffffffffc8 b: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1) 12: 00 00 00 15: 90 nop 16: f3 0f 1e fa endbr64 1a: 80 3d 2d 44 09 00 00 cmpb $0x0,0x9442d(%rip) # 0x9444e 21: 74 13 je 0x36 23: b8 01 00 00 00 mov $0x1,%eax 28: 0f 05 syscall 2a: 09 .byte 0x9 [ 0.914807] RSP: 002b:00007ffea1938b78 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 0.915197] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000424c34 [ 0.915556] RDX: 000000000000003c RSI: 000000002af378c0 RDI: 0000000000000003 [ 0.915912] RBP: 00007ffea1938bc0 R08: 00000000004b8820 R09: 0000000000000000 [ 0.916297] R10: 0000000000000001 R11: 0000000000000202 R12: 00007ffea1938d28 [ 0.916652] R13: 00007ffea1938d38 R14: 00000000004b3828 R15: 0000000000000001 [ 0.917039] </TASK> [ 0.917158] Modules linked in: [ 0.917316] CR2: 0000000000000000 [ 0.917484] ---[ end trace 0000000000000000 ]--- [ 0.917717] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.917978] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.918902] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.919198] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.919559] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.919908] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.920289] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.920648] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.921014] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.921424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.921710] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.922097] PKRU: 55555554 [ 0.922240] Kernel panic - not syncing: Fatal exception [ 0.922590] Kernel Offset: disabled Fixes: 0545a30 ("pkt_sched: QFQ - quick fair queue scheduler") Signed-off-by: Xiang Mei <xmei5@asu.edu> Link: https://patch.msgid.link/20260106034100.1780779-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
Protect the reset path from callbacks by setting the netdevs to detached state and close any netdevs in UP state until the reset handling has completed. During a reset, the driver will de-allocate resources for the vport, and there is no guarantee that those will recover, which is why the existing vport_ctrl_lock does not provide sufficient protection. idpf_detach_and_close() is called right before reset handling. If the reset handling succeeds, the netdevs state is recovered via call to idpf_attach_and_open(). If the reset handling fails the netdevs remain down. The detach/down calls are protected with RTNL lock to avoid racing with callbacks. On the recovery side the attach can be done without holding the RTNL lock as there are no callbacks expected at that point, due to detach/close always being done first in that flow. The previous logic restoring the netdevs state based on the IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is still being used to restore the state of the netdevs following the reset, but has no use outside of the reset handling flow. idpf_init_hard_reset() is converted to void, since it was used as such and there is no error handling being done based on its return value. Before this change, invoking hard and soft resets simultaneously will cause the driver to lose the vport state: ip -br a <inf> UP echo 1 > /sys/class/net/ens801f0/device/reset& \ ethtool -L ens801f0 combined 8 ip -br a <inf> DOWN ip link set <inf> up ip -br a <inf> DOWN Also in case of a failure in the reset path, the netdev is left exposed to external callbacks, while vport resources are not initialized, leading to a crash on subsequent ifup/down: [408471.398966] idpf 0000:83:00.0: HW reset detected [408471.411744] idpf 0000:83:00.0: Device HW Reset initiated [408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2 [408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078 [408508.126112] #PF: supervisor read access in kernel mode [408508.126687] #PF: error_code(0x0000) - not-present page [408508.127256] PGD 2aae2f067 P4D 0 [408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI ... [408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf] ... [408508.139193] Call Trace: [408508.139637] <TASK> [408508.140077] __dev_close_many+0xbb/0x260 [408508.140533] __dev_change_flags+0x1cf/0x280 [408508.140987] netif_change_flags+0x26/0x70 [408508.141434] dev_change_flags+0x3d/0xb0 [408508.141878] devinet_ioctl+0x460/0x890 [408508.142321] inet_ioctl+0x18e/0x1d0 [408508.142762] ? _copy_to_user+0x22/0x70 [408508.143207] sock_do_ioctl+0x3d/0xe0 [408508.143652] sock_ioctl+0x10e/0x330 [408508.144091] ? find_held_lock+0x2b/0x80 [408508.144537] __x64_sys_ioctl+0x96/0xe0 [408508.144979] do_syscall_64+0x79/0x3d0 [408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e [408508.145860] RIP: 0033:0x7f3e0bb4caff Fixes: 0fe4546 ("idpf: add create vport and netdev configuration") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
The RSS LUT is not initialized until the interface comes up, causing the following NULL pointer crash when ethtool operations like rxhash on/off are performed before the interface is brought up for the first time. Move RSS LUT initialization from ndo_open to vport creation to ensure LUT is always available. This enables RSS configuration via ethtool before bringing the interface up. Simplify LUT management by maintaining all changes in the driver's soft copy and programming zeros to the indirection table when rxhash is disabled. Defer HW programming until the interface comes up if it is down during rxhash and LUT configuration changes. Steps to reproduce: ** Load idpf driver; interfaces will be created modprobe idpf ** Before bringing the interfaces up, turn rxhash off ethtool -K eth2 rxhash off [89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000 [89408.371908] #PF: supervisor read access in kernel mode [89408.371924] #PF: error_code(0x0000) - not-present page [89408.371940] PGD 0 P4D 0 [89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI <snip> [89408.372052] RIP: 0010:memcpy_orig+0x16/0x130 [89408.372310] Call Trace: [89408.372317] <TASK> [89408.372326] ? idpf_set_features+0xfc/0x180 [idpf] [89408.372363] __netdev_update_features+0x295/0xde0 [89408.372384] ethnl_set_features+0x15e/0x460 [89408.372406] genl_family_rcv_msg_doit+0x11f/0x180 [89408.372429] genl_rcv_msg+0x1ad/0x2b0 [89408.372446] ? __pfx_ethnl_set_features+0x10/0x10 [89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10 [89408.372482] netlink_rcv_skb+0x58/0x100 [89408.372502] genl_rcv+0x2c/0x50 [89408.372516] netlink_unicast+0x289/0x3e0 [89408.372533] netlink_sendmsg+0x215/0x440 [89408.372551] __sys_sendto+0x234/0x240 [89408.372571] __x64_sys_sendto+0x28/0x30 [89408.372585] x64_sys_call+0x1909/0x1da0 [89408.372604] do_syscall_64+0x7a/0xfa0 [89408.373140] ? clear_bhb_loop+0x60/0xb0 [89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e [89408.378887] </TASK> <snip> Fixes: a251eee ("idpf: add SRIOV support and other ndo_ops") Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
During soft reset, the RSS LUT is freed and not restored unless the interface is up. If an ethtool command that accesses the rss lut is attempted immediately after reset, it will result in NULL ptr dereference. Also, there is no need to reset the rss lut if the soft reset does not involve queue count change. After soft reset, set the RSS LUT to default values based on the updated queue count only if the reset was a result of a queue count change and the LUT was not configured by the user. In all other cases, don't touch the LUT. Steps to reproduce: ** Bring the interface down (if up) ifconfig eth1 down ** update the queue count (eg., 27->20) ethtool -L eth1 combined 20 ** display the RSS LUT ethtool -x eth1 [82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000 [82375.558373] #PF: supervisor read access in kernel mode [82375.558391] #PF: error_code(0x0000) - not-present page [82375.558408] PGD 0 P4D 0 [82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI <snip> [82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf] [82375.558786] Call Trace: [82375.558793] <TASK> [82375.558804] rss_prepare.isra.0+0x187/0x2a0 [82375.558827] rss_prepare_data+0x3a/0x50 [82375.558845] ethnl_default_doit+0x13d/0x3e0 [82375.558863] genl_family_rcv_msg_doit+0x11f/0x180 [82375.558886] genl_rcv_msg+0x1ad/0x2b0 [82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10 [82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10 [82375.558937] netlink_rcv_skb+0x58/0x100 [82375.558957] genl_rcv+0x2c/0x50 [82375.558971] netlink_unicast+0x289/0x3e0 [82375.558988] netlink_sendmsg+0x215/0x440 [82375.559005] __sys_sendto+0x234/0x240 [82375.559555] __x64_sys_sendto+0x28/0x30 [82375.560068] x64_sys_call+0x1909/0x1da0 [82375.560576] do_syscall_64+0x7a/0xfa0 [82375.561076] ? clear_bhb_loop+0x60/0xb0 [82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e <snip> Fixes: 02cbfba ("idpf: add ethtool callbacks") Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
During GPU reset, VBlank interrupts are disabled which causes drm_fb_helper_fb_dirty() to wait for VBlank timeout. This will create call traces like (seen on an RX7900 series dGPU): [ 101.313646] ------------[ cut here ]------------ [ 101.313648] amdgpu 0000:03:00.0: [drm] vblank wait timed out on crtc 0 [ 101.313657] WARNING: CPU: 0 PID: 461 at drivers/gpu/drm/drm_vblank.c:1320 drm_wait_one_vblank+0x176/0x220 [ 101.313663] Modules linked in: amdgpu amdxcp drm_panel_backlight_quirks gpu_sched drm_buddy drm_ttm_helper ttm drm_exec drm_suballoc_helper drm_display_helper cec rc_core i2c_algo_bit nf_conntrack_netlink xt_nat xt_tcpudp veth xt_conntrack xt_MASQUERADE bridge stp llc xfrm_user xfrm_algo xt_set ip_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_addrtype nft_compat x_tables nf_tables overlay qrtr sunrpc snd_hda_codec_alc882 snd_hda_codec_realtek_lib snd_hda_codec_generic snd_hda_codec_atihdmi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_intel_dspcfg snd_intel_sdw_acpi snd_hwdep snd_pcm amd_atl intel_rapl_msr snd_seq_midi intel_rapl_common asus_ec_sensors snd_seq_midi_event snd_rawmidi snd_seq eeepc_wmi snd_seq_device edac_mce_amd asus_wmi polyval_clmulni ghash_clmulni_intel snd_timer platform_profile aesni_intel wmi_bmof sparse_keymap joydev snd rapl input_leds i2c_piix4 soundcore ccp k10temp i2c_smbus gpio_amdpt mac_hid binfmt_misc sch_fq_codel msr parport_pc ppdev lp parport [ 101.313745] efi_pstore nfnetlink dmi_sysfs autofs4 hid_generic usbhid hid r8169 realtek ahci libahci video wmi [ 101.313760] CPU: 0 UID: 0 PID: 461 Comm: kworker/0:2 Not tainted 6.18.0-rc6-174403b3b920 #1 PREEMPT(voluntary) [ 101.313763] Hardware name: ASUS System Product Name/TUF GAMING X670E-PLUS, BIOS 0821 11/15/2022 [ 101.313765] Workqueue: events drm_fb_helper_damage_work [ 101.313769] RIP: 0010:drm_wait_one_vblank+0x176/0x220 [ 101.313772] Code: 7c 24 08 4c 8b 77 50 4d 85 f6 0f 84 a1 00 00 00 e8 2f 11 03 00 44 89 e9 4c 89 f2 48 c7 c7 d0 ad 0d a8 48 89 c6 e8 2a e0 4a ff <0f> 0b e9 f2 fe ff ff 48 85 ff 74 04 4c 8b 67 08 4d 8b 6c 24 50 4d [ 101.313774] RSP: 0018:ffffc99c00d47d68 EFLAGS: 00010246 [ 101.313777] RAX: 0000000000000000 RBX: 000000000200038a RCX: 0000000000000000 [ 101.313778] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 101.313779] RBP: ffffc99c00d47dc0 R08: 0000000000000000 R09: 0000000000000000 [ 101.313781] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8948c4280010 [ 101.313782] R13: 0000000000000000 R14: ffff894883263a50 R15: ffff89488c384830 [ 101.313784] FS: 0000000000000000(0000) GS:ffff895424692000(0000) knlGS:0000000000000000 [ 101.313785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.313787] CR2: 00007773650ee200 CR3: 0000000588e40000 CR4: 0000000000f50ef0 [ 101.313788] PKRU: 55555554 [ 101.313790] Call Trace: [ 101.313791] <TASK> [ 101.313795] ? __pfx_autoremove_wake_function+0x10/0x10 [ 101.313800] drm_crtc_wait_one_vblank+0x17/0x30 [ 101.313802] drm_client_modeset_wait_for_vblank+0x61/0x80 [ 101.313805] drm_fb_helper_damage_work+0x46/0x1a0 [ 101.313808] process_one_work+0x1a1/0x3f0 [ 101.313812] worker_thread+0x2ba/0x3d0 [ 101.313816] kthread+0x107/0x220 [ 101.313818] ? __pfx_worker_thread+0x10/0x10 [ 101.313821] ? __pfx_kthread+0x10/0x10 [ 101.313823] ret_from_fork+0x202/0x230 [ 101.313826] ? __pfx_kthread+0x10/0x10 [ 101.313828] ret_from_fork_asm+0x1a/0x30 [ 101.313834] </TASK> [ 101.313835] ---[ end trace 0000000000000000 ]--- Cancel pending damage work synchronously before console_lock() to ensure any in-flight framebuffer damage operations complete before suspension. Also check for FBINFO_STATE_RUNNING in drm_fb_helper_damage_work() to avoid executing damage work if it is rescheduled while the device is suspended. Fixes: d8c4bdd ("drm/fb-helper: Synchronize dirty worker with vblank") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Chengjun Yao <Chengjun.Yao@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20251215081822.432005-1-Chengjun.Yao@amd.com
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
If two drivers were calling gpiochip_add_data_with_key(), one may be traversing the srcu-protected list in gpio_name_to_desc(), meanwhile other has just added its gdev in gpiodev_add_to_list_unlocked(). This creates a non-mutexed and non-protected timeframe, when one instance is dereferencing and using &gdev->srcu, before the other has initialized it, resulting in crash: [ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000 [ 4.943396] Mem abort info: [ 4.943400] ESR = 0x0000000096000005 [ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.943407] SET = 0, FnV = 0 [ 4.943410] EA = 0, S1PTW = 0 [ 4.943413] FSC = 0x05: level 1 translation fault [ 4.943416] Data abort info: [ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000 [ 4.961449] [ffff800272bcc000] pgd=0000000000000000 [ 4.969203] , p4d=1000000039739003 [ 4.979730] , pud=0000000000000000 [ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset" [ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP ... [ 5.121359] pc : __srcu_read_lock+0x44/0x98 [ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0 [ 5.153671] sp : ffff8000833bb430 [ 5.298440] [ 5.298443] Call trace: [ 5.298445] __srcu_read_lock+0x44/0x98 [ 5.309484] gpio_name_to_desc+0x60/0x1a0 [ 5.320692] gpiochip_add_data_with_key+0x488/0xf00 5.946419] ---[ end trace 0000000000000000 ]--- Move initialization code for gdev fields before it is added to gpio_devices, with adjacent initialization code. Adjust goto statements to reflect modified order of operations Fixes: 47d8b4c ("gpio: add SRCU infrastructure to struct gpio_device") Reviewed-by: Jakub Lewalski <jakub.lewalski@nokia.com> Signed-off-by: Paweł Narewski <pawel.narewski@nokia.com> [Bartosz: fixed a build issue, removed stray newline] Link: https://lore.kernel.org/r/20251224082641.10769-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.
This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name:
kworker/u16:0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
6 locks held by kworker/u16:0/12:
#0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0},
at: process_one_work+0x18c/0x604
#1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at:
process_one_work+0x1b4/0x604
#2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at:
__device_attach+0x38/0x1b0
#3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
#4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at:
gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy]
#5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
irq event stamp: 81450
hardirqs last enabled at (81449): [<ffff8000813acba4>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (81450): [<ffff8000813abfb8>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last enabled at (79616): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
softirqs last disabled at (79614): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted
6.19.0-rc4-next-20260105+ #11975 PREEMPT
Hardware name: Hardkernel ODROID-M1 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__might_resched+0x144/0x248
__might_sleep+0x48/0x98
__mutex_lock+0x5c/0x894
mutex_lock_nested+0x24/0x30
pinctrl_get_device_gpio_range+0x44/0x128
pinctrl_gpio_direction+0x3c/0xe0
pinctrl_gpio_direction_output+0x14/0x20
rockchip_gpio_direction_output+0xb8/0x19c
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_direction_output+0x34/0xf8
gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy]
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_configure_flags+0xbc/0x480
gpiod_find_and_request+0x1a0/0x574
gpiod_get_index+0x58/0x84
devm_gpiod_get_index+0x20/0xb4
devm_gpiod_get_optional+0x18/0x30
rockchip_pcie_probe+0x98/0x380
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
…ked_inode() In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree() while holding a path with a read locked leaf from a subvolume tree, and btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can trigger reclaim. This can create a circular lock dependency which lockdep warns about with the following splat: [6.1433] ====================================================== [6.1574] WARNING: possible circular locking dependency detected [6.1583] 6.18.0+ #4 Tainted: G U [6.1591] ------------------------------------------------------ [6.1599] kswapd0/117 is trying to acquire lock: [6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1625] but task is already holding lock: [6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60 [6.1646] which lock already depends on the new lock. [6.1657] the existing dependency chain (in reverse order) is: [6.1667] -> #2 (fs_reclaim){+.+.}-{0:0}: [6.1677] fs_reclaim_acquire+0x9d/0xd0 [6.1685] __kmalloc_cache_noprof+0x59/0x750 [6.1694] btrfs_init_file_extent_tree+0x90/0x100 [6.1702] btrfs_read_locked_inode+0xc3/0x6b0 [6.1710] btrfs_iget+0xbb/0xf0 [6.1716] btrfs_lookup_dentry+0x3c5/0x8e0 [6.1724] btrfs_lookup+0x12/0x30 [6.1731] lookup_open.isra.0+0x1aa/0x6a0 [6.1739] path_openat+0x5f7/0xc60 [6.1746] do_filp_open+0xd6/0x180 [6.1753] do_sys_openat2+0x8b/0xe0 [6.1760] __x64_sys_openat+0x54/0xa0 [6.1768] do_syscall_64+0x97/0x3e0 [6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1784] -> #1 (btrfs-tree-00){++++}-{3:3}: [6.1794] lock_release+0x127/0x2a0 [6.1801] up_read+0x1b/0x30 [6.1808] btrfs_search_slot+0x8e0/0xff0 [6.1817] btrfs_lookup_inode+0x52/0xd0 [6.1825] __btrfs_update_delayed_inode+0x73/0x520 [6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120 [6.1842] btrfs_log_inode+0x608/0x1aa0 [6.1849] btrfs_log_inode_parent+0x249/0xf80 [6.1857] btrfs_log_dentry_safe+0x3e/0x60 [6.1865] btrfs_sync_file+0x431/0x690 [6.1872] do_fsync+0x39/0x80 [6.1879] __x64_sys_fsync+0x13/0x20 [6.1887] do_syscall_64+0x97/0x3e0 [6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1903] -> #0 (&delayed_node->mutex){+.+.}-{3:3}: [6.1913] __lock_acquire+0x15e9/0x2820 [6.1920] lock_acquire+0xc9/0x2d0 [6.1927] __mutex_lock+0xcc/0x10a0 [6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1944] btrfs_evict_inode+0x20b/0x4b0 [6.1952] evict+0x15a/0x2f0 [6.1958] prune_icache_sb+0x91/0xd0 [6.1966] super_cache_scan+0x150/0x1d0 [6.1974] do_shrink_slab+0x155/0x6f0 [6.1981] shrink_slab+0x48e/0x890 [6.1988] shrink_one+0x11a/0x1f0 [6.1995] shrink_node+0xbfd/0x1320 [6.1002] balance_pgdat+0x67f/0xc60 [6.1321] kswapd+0x1dc/0x3e0 [6.1643] kthread+0xff/0x240 [6.1965] ret_from_fork+0x223/0x280 [6.1287] ret_from_fork_asm+0x1a/0x30 [6.1616] other info that might help us debug this: [6.1561] Chain exists of: &delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim [6.1503] Possible unsafe locking scenario: [6.1110] CPU0 CPU1 [6.1411] ---- ---- [6.1707] lock(fs_reclaim); [6.1998] lock(btrfs-tree-00); [6.1291] lock(fs_reclaim); [6.1581] lock(&delayed_node->mutex); [6.1874] *** DEADLOCK *** [6.1716] 2 locks held by kswapd0/117: [6.1999] #0: ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60 [6.1294] #1: ffff8d998344b0e0 (&type->s_umount_key#40){++++}- {3:3}, at: super_cache_scan+0x37/0x1d0 [6.1596] stack backtrace: [6.1183] CPU: 11 UID: 0 PID: 117 Comm: kswapd0 Tainted: G U 6.18.0+ #4 PREEMPT(lazy) [6.1185] Tainted: [U]=USER [6.1186] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [6.1187] Call Trace: [6.1187] <TASK> [6.1189] dump_stack_lvl+0x6e/0xa0 [6.1192] print_circular_bug.cold+0x17a/0x1c0 [6.1194] check_noncircular+0x175/0x190 [6.1197] __lock_acquire+0x15e9/0x2820 [6.1200] lock_acquire+0xc9/0x2d0 [6.1201] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1204] __mutex_lock+0xcc/0x10a0 [6.1206] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1208] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1211] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1213] __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1215] btrfs_evict_inode+0x20b/0x4b0 [6.1217] ? lock_acquire+0xc9/0x2d0 [6.1220] evict+0x15a/0x2f0 [6.1222] prune_icache_sb+0x91/0xd0 [6.1224] super_cache_scan+0x150/0x1d0 [6.1226] do_shrink_slab+0x155/0x6f0 [6.1228] shrink_slab+0x48e/0x890 [6.1229] ? shrink_slab+0x2d2/0x890 [6.1231] shrink_one+0x11a/0x1f0 [6.1234] shrink_node+0xbfd/0x1320 [6.1236] ? shrink_node+0xa2d/0x1320 [6.1236] ? shrink_node+0xbd3/0x1320 [6.1239] ? balance_pgdat+0x67f/0xc60 [6.1239] balance_pgdat+0x67f/0xc60 [6.1241] ? finish_task_switch.isra.0+0xc4/0x2a0 [6.1246] kswapd+0x1dc/0x3e0 [6.1247] ? __pfx_autoremove_wake_function+0x10/0x10 [6.1249] ? __pfx_kswapd+0x10/0x10 [6.1250] kthread+0xff/0x240 [6.1251] ? __pfx_kthread+0x10/0x10 [6.1253] ret_from_fork+0x223/0x280 [6.1255] ? __pfx_kthread+0x10/0x10 [6.1257] ret_from_fork_asm+0x1a/0x30 [6.1260] </TASK> This is because: 1) The fsync task is holding an inode's delayed node mutex (for a directory) while calling __btrfs_update_delayed_inode() and that needs to do a search on the subvolume's btree (therefore read lock some extent buffers); 2) The lookup task, at btrfs_lookup(), triggered reclaim with the GFP_KERNEL allocation done by btrfs_init_file_extent_tree() while holding a read lock on a subvolume leaf; 3) The reclaim triggered kswapd which is doing inode eviction for the directory inode the fsync task is using as an argument to btrfs_commit_inode_delayed_inode() - but in that call chain we are trying to read lock the same leaf that the lookup task is holding while calling btrfs_init_file_extent_tree() and doing the GFP_KERNEL allocation. Fix this by calling btrfs_init_file_extent_tree() after we don't need the path anymore and release it in btrfs_read_locked_inode(). Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://lore.kernel.org/linux-btrfs/6e55113a22347c3925458a5d840a18401a38b276.camel@linux.intel.com/ Fixes: 8679d26 ("btrfs: initialize inode::file_extent_tree after i_mode has been set") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as CONFIG_PROVE_RAW_LOCK_NESTING warns: ============================= [ BUG: Invalid wait context ] 6.18.0-rc1+git... #1 ----------------------------- some-user-space-process/1251 is trying to lock: (&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter] other info that might help us debug this: context-{2:2} no locks held by some-user-space-process/.... stack backtrace: CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT Call trace: show_stack (C) dump_stack_lvl dump_stack __lock_acquire lock_acquire _raw_spin_lock_irqsave counter_push_event [counter] interrupt_cnt_isr [interrupt_cnt] __handle_irq_event_percpu handle_irq_event handle_simple_irq handle_irq_desc generic_handle_domain_irq gpio_irq_handler handle_irq_desc generic_handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler el0_interrupt __el0_irq_handler_common el0t_64_irq_handler el0t_64_irq ... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an alternative to switching to raw_spinlock_t, because the latter would limit all potential nested locks to raw_spinlock_t only. Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20251117151314.xwLAZrWY@linutronix.de/ Fixes: a55ebd4 ("counter: add IRQ or GPIO based counter") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20251118083603.778626-1-alexander.sverdlin@siemens.com Signed-off-by: William Breathitt Gray <wbg@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
When forward-porting Rust Binder to 6.18, I neglected to take commit fb56fdf ("mm/list_lru: split the lock to per-cgroup scope") into account, and apparently I did not end up running the shrinker callback when I sanity tested the driver before submission. This leads to crashes like the following: ============================================ WARNING: possible recursive locking detected 6.18.0-mainline-maybe-dirty #1 Tainted: G IO -------------------------------------------- kswapd0/68 is trying to acquire lock: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: lock_list_lru_of_memcg+0x128/0x230 but task is already holding lock: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&l->lock); lock(&l->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kswapd0/68: #0: ffffffff90d2e260 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x597/0x1160 #1: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20 #2: ffffffff90cf3680 (rcu_read_lock){....}-{1:2}, at: lock_list_lru_of_memcg+0x2d/0x230 To fix this, remove the spin_lock() call from rust_shrink_free_page(). Cc: stable <stable@kernel.org> Fixes: eafedbc ("rust_binder: add Rust Binder driver") Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20251202-binder-shrink-unspin-v1-1-263efb9ad625@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
Analog to commit db5b4e3 ("ip6_gre: make ip6gre_header() robust") Over the years, syzbot found many ways to crash the kernel in ipgre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ipgre device. [1] skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0 kernel BUG at net/core/skbuff.c:213 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213 Call Trace: <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 Fixes: c544193 ("GRE: Refactor GRE tunneling code.") Reported-by: syzbot+7c134e1c3aa3283790b9@syzkaller.appspotmail.com Closes: https://www.spinics.net/lists/netdev/msg1147302.html Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260108190214.1667040-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
The Secondary Sample Point Source field has been
set to an incorrect value by some mistake in the
past
0b01 - SSP_SRC_NO_SSP - SSP is not used.
for data bitrates above 1 MBit/s. The correct/default
value already used for lower bitrates is
0b00 - SSP_SRC_MEAS_N_OFFSET - SSP position = TRV_DELAY
(Measured Transmitter delay) + SSP_OFFSET.
The related configuration register structure is described
in section 3.1.46 SSP_CFG of the CTU CAN FD
IP CORE Datasheet.
The analysis leading to the proper configuration
is described in section 2.8.3 Secondary sampling point
of the datasheet.
The change has been tested on AMD/Xilinx Zynq
with the next CTU CN FD IP core versions:
- 2.6 aka master in the "integration with Zynq-7000 system" test
6.12.43-rt12+ #1 SMP PREEMPT_RT kernel with CTU CAN FD git
driver (change already included in the driver repo)
- older 2.5 snapshot with mainline kernels with this patch
applied locally in the multiple CAN latency tester nightly runs
6.18.0-rc4-rt3-dut #1 SMP PREEMPT_RT
6.19.0-rc3-dut
The logs, the datasheet and sources are available at
https://canbus.pages.fel.cvut.cz/
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260105111620.16580-1-pisa@fel.cvut.cz
Fixes: 2dcb8e8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
mlx5e_netdev_change_profile can fail to attach a new profile and can
fail to rollback to old profile, in such case, we could end up with a
dangling netdev with a fully reset netdev_priv. A retry to change
profile, e.g. another attempt to call mlx5e_netdev_change_profile via
switchdev mode change, will crash trying to access the now NULL
priv->mdev.
This fix allows mlx5e_netdev_change_profile() to handle previous
failures and an empty priv, by not assuming priv is valid.
Pass netdev and mdev to all flows requiring
mlx5e_netdev_change_profile() and avoid passing priv.
In mlx5e_netdev_change_profile() check if current priv is valid, and if
not, just attach the new profile without trying to access the old one.
This fixes the following oops, when enabling switchdev mode for the 2nd
time after first time failure:
## Enabling switchdev mode first time:
mlx5_core 0012:03:00.1: E-Switch: Supported tc chains and prios offload
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
^^^^^^^^
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
## retry: Enabling switchdev mode 2nd time:
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
BUG: kernel NULL pointer dereference, address: 0000000000000038
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 13 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc4+ #91 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_detach_netdev+0x3c/0x90
Code: 50 00 00 f0 80 4f 78 02 48 8b bf e8 07 00 00 48 85 ff 74 16 48 8b 73 78 48 d1 ee 83 e6 01 83 f6 01 40 0f b6 f6 e8 c4 42 00 00 <48> 8b 45 38 48 85 c0 74 08 48 89 df e8 cc 47 40 1e 48 8b bb f0 07
RSP: 0018:ffffc90000673890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8881036a89c0 RCX: 0000000000000000
RDX: ffff888113f63800 RSI: ffffffff822fe720 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000002dcd R09: 0000000000000000
R10: ffffc900006738e8 R11: 00000000ffffffff R12: 0000000000000000
R13: 0000000000000000 R14: ffff8881036a89c0 R15: 0000000000000000
FS: 00007fdfb8384740(0000) GS:ffff88856a9d6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000112ae0005 CR4: 0000000000370ef0
Call Trace:
<TASK>
mlx5e_netdev_change_profile+0x45/0xb0
mlx5e_vport_rep_load+0x27b/0x2d0
mlx5_esw_offloads_rep_load+0x72/0xf0
esw_offloads_enable+0x5d0/0x970
mlx5_eswitch_enable_locked+0x349/0x430
? is_mp_supported+0x57/0xb0
mlx5_devlink_eswitch_mode_set+0x26b/0x430
devlink_nl_eswitch_set_doit+0x6f/0xf0
genl_family_rcv_msg_doit+0xe8/0x140
genl_rcv_msg+0x18b/0x290
? __pfx_devlink_nl_pre_doit+0x10/0x10
? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
? __pfx_devlink_nl_post_doit+0x10/0x10
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x52/0x100
genl_rcv+0x28/0x40
netlink_unicast+0x282/0x3e0
? __alloc_skb+0xd6/0x190
netlink_sendmsg+0x1f7/0x430
__sys_sendto+0x213/0x220
? __sys_recvmsg+0x6a/0xd0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdfb8495047
Fixes: c4d7eb5 ("net/mxl5e: Add change profile method")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260108212657.25090-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
mlx5e_priv is an unstable structure that can be memset(0) if profile attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to reference the netdev and mdev associated with that struct. Instead, store netdev directly into mlx5e_dev and get mdev from the containing mlx5_adev aux device structure. This fixes a kernel oops in mlx5e_remove when switchdev mode fails due to change profile failure. $ devlink dev eswitch set pci/0000:00:03.0 mode switchdev Error: mlx5_core: Failed setting eswitch to offloads. dmesg: workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 $ devlink dev reload pci/0000:00:03.0 ==> oops BUG: kernel NULL pointer dereference, address: 0000000000000520 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_remove+0x68/0x130 RSP: 0018:ffffc900034838f0 EFLAGS: 00010246 RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10 R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0 R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400 FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0 Call Trace: <TASK> device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140 Fixes: ee75f1f ("net/mlx5e: Create separate devlink instance for ethernet auxiliary device") Fixes: c4d7eb5 ("net/mxl5e: Add change profile method") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://patch.msgid.link/20260108212657.25090-3-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
mlx5e_priv is an unstable structure that can be memset(0) if profile attaching fails. Pass netdev to mlx5e_destroy_netdev() to guarantee it will work on a valid netdev. On mlx5e_remove: Check validity of priv->profile, before attempting to cleanup any resources that might be not there. This fixes a kernel oops in mlx5e_remove when switchdev mode fails due to change profile failure. $ devlink dev eswitch set pci/0000:00:03.0 mode switchdev Error: mlx5_core: Failed setting eswitch to offloads. dmesg: workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 $ devlink dev reload pci/0000:00:03.0 ==> oops BUG: kernel NULL pointer dereference, address: 0000000000000370 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 15 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc5+ #115 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_dcbnl_dscp_app+0x23/0x100 RSP: 0018:ffffc9000083f8b8 EFLAGS: 00010286 RAX: ffff8881126fc380 RBX: ffff8881015ac400 RCX: ffffffff826ffc45 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8881035109c0 RBP: ffff8881035109c0 R08: ffff888101e3e838 R09: ffff888100264e10 R10: ffffc9000083f898 R11: ffffc9000083f8a0 R12: ffff888101b921a0 R13: ffff888101b921a0 R14: ffff8881015ac9a0 R15: ffff8881015ac400 FS: 00007f789a3c8740(0000) GS:ffff88856aa59000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000370 CR3: 000000010b6c0001 CR4: 0000000000370ef0 Call Trace: <TASK> mlx5e_remove+0x57/0x110 device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140 Fixes: c4d7eb5 ("net/mxl5e: Add change profile method") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260108212657.25090-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
The kernel test robot has reported: BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28 lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0 CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470 Call Trace: <IRQ> __dump_stack (lib/dump_stack.c:95) dump_stack_lvl (lib/dump_stack.c:123) dump_stack (lib/dump_stack.c:130) spin_dump (kernel/locking/spinlock_debug.c:71) do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?) _raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138) __free_frozen_pages (mm/page_alloc.c:2973) ___free_pages (mm/page_alloc.c:5295) __free_pages (mm/page_alloc.c:5334) tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290) ? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289) ? rcu_core (kernel/rcu/tree.c:?) rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861) rcu_core_si (kernel/rcu/tree.c:2879) handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623) __irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725) irq_exit_rcu (kernel/softirq.c:741) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052) </IRQ> <TASK> RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194) free_pcppages_bulk (mm/page_alloc.c:1494) drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632) __drain_all_pages (mm/page_alloc.c:2731) drain_all_pages (mm/page_alloc.c:2747) kcompactd (mm/compaction.c:3115) kthread (kernel/kthread.c:465) ? __cfi_kcompactd (mm/compaction.c:3166) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork (arch/x86/kernel/process.c:164) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) </TASK> Matthew has analyzed the report and identified that in drain_page_zone() we are in a section protected by spin_lock(&pcp->lock) and then get an interrupt that attempts spin_trylock() on the same lock. The code is designed to work this way without disabling IRQs and occasionally fail the trylock with a fallback. However, the SMP=n spinlock implementation assumes spin_trylock() will always succeed, and thus it's normally a no-op. Here the enabled lock debugging catches the problem, but otherwise it could cause a corruption of the pcp structure. The problem has been introduced by commit 5749077 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme recognizes the need for disabling IRQs to prevent nesting spin_trylock() sections on SMP=n, but the need to prevent the nesting in spin_lock() has not been recognized. Fix it by introducing local wrappers that change the spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places that do spin_lock(&pcp->lock). [vbabka@suse.cz: add pcp_ prefix to the spin_lock_irqsave wrappers, per Steven] Link: https://lkml.kernel.org/r/20260105-fix-pcp-up-v1-1-5579662d2071@suse.cz Fixes: 5749077 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202512101320.e2f2dd6f-lkp@intel.com Analyzed-by: Matthew Wilcox <willy@infradead.org> Link: https://lore.kernel.org/all/aUW05pyc9nZkvY-1@casper.infradead.org/ Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
The commit d5d399e ("printk/nbcon: Release nbcon consoles ownership in atomic flush after each emitted record") prevented stall of a CPU which lost nbcon console ownership because another CPU entered an emergency flush. But there is still the problem that the CPU doing the emergency flush might cause a stall on its own. Let's go even further and restore IRQ in the atomic flush after each emitted record. It is not a complete solution. The interrupts and/or scheduling might still be blocked when the emergency atomic flush was called with IRQs and/or scheduling disabled. But it should remove the following lockup: mlx5_core 0000:03:00.0: Shutdown was called kvm: exiting hardware virtualization arm-smmu-v3 arm-smmu-v3.10.auto: CMD_SYNC timeout at 0x00000103 [hwprod 0x00000104, hwcons 0x00000102] smp: csd: Detected non-responsive CSD lock (#1) on CPU#4, waiting 5000000032 ns for CPU#00 do_nothing (kernel/smp.c:1057) smp: csd: CSD lock (#1) unresponsive. [...] Call trace: pl011_console_write_atomic (./arch/arm64/include/asm/vdso/processor.h:12 drivers/tty/serial/amba-pl011.c:2540) (P) nbcon_emit_next_record (kernel/printk/nbcon.c:1049) __nbcon_atomic_flush_pending_con (kernel/printk/nbcon.c:1517) __nbcon_atomic_flush_pending.llvm.15488114865160659019 (./arch/arm64/include/asm/alternative-macros.h:254 ./arch/arm64/include/asm/cpufeature.h:808 ./arch/arm64/include/asm/irqflags.h:192 kernel/printk/nbcon.c:1562 kernel/printk/nbcon.c:1612) nbcon_atomic_flush_pending (kernel/printk/nbcon.c:1629) printk_kthreads_shutdown (kernel/printk/printk.c:?) syscore_shutdown (drivers/base/syscore.c:120) kernel_kexec (kernel/kexec_core.c:1045) __arm64_sys_reboot (kernel/reboot.c:794 kernel/reboot.c:722 kernel/reboot.c:722) invoke_syscall (arch/arm64/kernel/syscall.c:50) el0_svc_common.llvm.14158405452757855239 (arch/arm64/kernel/syscall.c:?) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (./arch/arm64/include/asm/alternative-macros.h:254 ./arch/arm64/include/asm/cpufeature.h:808 ./arch/arm64/include/asm/irqflags.h:73 arch/arm64/kernel/entry-common.c:169 arch/arm64/kernel/entry-common.c:182 arch/arm64/kernel/entry-common.c:749) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:820) el0t_64_sync (arch/arm64/kernel/entry.S:600) In this case, nbcon_atomic_flush_pending() is called from printk_kthreads_shutdown() with IRQs and scheduling enabled. Note that __nbcon_atomic_flush_pending_con() is directly called also from nbcon_device_release() where the disabled IRQs might break PREEMPT_RT guarantees. But the atomic flush is called only in emergency or panic situations where the latencies are irrelevant anyway. An ultimate solution would be a touching of watchdogs. But it would hide all problems. Let's do it later when anyone reports a stall which does not have a better solution. Closes: https://lore.kernel.org/r/sqwajvt7utnt463tzxgwu2yctyn5m6bjwrslsnupfexeml6hkd@v6sqmpbu3vvu Tested-by: Breno Leitao <leitao@debian.org> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://patch.msgid.link/20251212124520.244483-1-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
After resume from suspend to RAM, the following splash is generated if the HDMI driver is probed (independent of a connected cable): [ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option) [ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT [ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT) [ 1194.484085] Call trace: [ 1194.484087] ... (stripped) [ 1194.484283] handlers: [ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp] [ 1194.484302] Disabling IRQ #80 Apparently the HDMI IP is losing part of its state while the system is suspended and generates spurious interrupts during resume. The bug has not yet been noticed, as system suspend does not yet work properly on upstream kernel with either the Rockchip RK3588 or RK3576 platform. Fixes: 128a9bf ("drm/rockchip: Add basic RK3588 HDMI output support") Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
During device unmapping (triggered by module unload or explicit unmap), a refcount underflow occurs causing a use-after-free warning: [14747.574913] ------------[ cut here ]------------ [14747.574916] refcount_t: underflow; use-after-free. [14747.574917] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x55/0x90, CPU#9: kworker/9:1/378 [14747.574924] Modules linked in: rnbd_client(-) rtrs_client rnbd_server rtrs_server rtrs_core ... [14747.574998] CPU: 9 UID: 0 PID: 378 Comm: kworker/9:1 Tainted: G O N 6.19.0-rc3lblk-fnext+ #42 PREEMPT(voluntary) [14747.575005] Workqueue: rnbd_clt_wq unmap_device_work [rnbd_client] [14747.575010] RIP: 0010:refcount_warn_saturate+0x55/0x90 [14747.575037] Call Trace: [14747.575038] <TASK> [14747.575038] rnbd_clt_unmap_device+0x170/0x1d0 [rnbd_client] [14747.575044] process_one_work+0x211/0x600 [14747.575052] worker_thread+0x184/0x330 [14747.575055] ? __pfx_worker_thread+0x10/0x10 [14747.575058] kthread+0x10d/0x250 [14747.575062] ? __pfx_kthread+0x10/0x10 [14747.575066] ret_from_fork+0x319/0x390 [14747.575069] ? __pfx_kthread+0x10/0x10 [14747.575072] ret_from_fork_asm+0x1a/0x30 [14747.575083] </TASK> [14747.575096] ---[ end trace 0000000000000000 ]--- Befor this patch :- The bug is a double kobject_put() on dev->kobj during device cleanup. Kobject Lifecycle: kobject_init_and_add() sets kobj.kref = 1 (initialization) kobject_put() sets kobj.kref = 0 (should be called once) * Before this patch: rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs] kobject_put(&dev->kobj) PUT #1 (WRONG!) kref: 1 to 0 rnbd_dev_release() kfree(dev) [DEVICE FREED!] rnbd_destroy_gen_disk() [use-after-free!] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) PUT #2 (UNDERFLOW!) kref: 0 to -1 [WARNING!] The first kobject_put() in rnbd_destroy_sysfs() prematurely frees the device via rnbd_dev_release(), then the second kobject_put() in rnbd_clt_put_dev() causes refcount underflow. * After this patch :- Remove kobject_put() from rnbd_destroy_sysfs(). This function should only remove sysfs visibility (kobject_del), not manage object lifetime. Call Graph (FIXED): rnbd_clt_unmap_device() rnbd_destroy_sysfs() kobject_del(&dev->kobj) [remove from sysfs only] [kref unchanged: 1] rnbd_destroy_gen_disk() [device still valid] rnbd_clt_put_dev() refcount_dec_and_test(&dev->refcount) kobject_put(&dev->kobj) ONLY PUT (CORRECT!) kref: 1 to 0 [BALANCED] rnbd_dev_release() kfree(dev) [CLEAN DESTRUCTION] This follows the kernel pattern where sysfs removal (kobject_del) is separate from object destruction (kobject_put). Fixes: 581cf83 ("block: rnbd: add .release to rnbd_dev_ktype") Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
In btrfs_read_locked_inode() if we fail to lookup the inode, we jump to
the 'out' label with a path that has a read locked leaf and then we call
iget_failed(). This can result in a ABBA deadlock, since iget_failed()
triggers inode eviction and that causes the release of the delayed inode,
which must lock the delayed inode's mutex, and a task updating a delayed
inode starts by taking the node's mutex and then modifying the inode's
subvolume btree.
Syzbot reported the following lockdep splat for this:
======================================================
WARNING: possible circular locking dependency detected
syzkaller #0 Not tainted
------------------------------------------------------
btrfs-cleaner/8725 is trying to acquire lock:
ffff0000d6826a48 (&delayed_node->mutex){+.+.}-{4:4}, at: __btrfs_release_delayed_node+0xa0/0x9b0 fs/btrfs/delayed-inode.c:290
but task is already holding lock:
ffff0000dbeba878 (btrfs-tree-00){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x44/0x2ec fs/btrfs/locking.c:145
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (btrfs-tree-00){++++}-{4:4}:
__lock_release kernel/locking/lockdep.c:5574 [inline]
lock_release+0x198/0x39c kernel/locking/lockdep.c:5889
up_read+0x24/0x3c kernel/locking/rwsem.c:1632
btrfs_tree_read_unlock+0xdc/0x298 fs/btrfs/locking.c:169
btrfs_tree_unlock_rw fs/btrfs/locking.h:218 [inline]
btrfs_search_slot+0xa6c/0x223c fs/btrfs/ctree.c:2133
btrfs_lookup_inode+0xd8/0x38c fs/btrfs/inode-item.c:395
__btrfs_update_delayed_inode+0x124/0xed0 fs/btrfs/delayed-inode.c:1032
btrfs_update_delayed_inode fs/btrfs/delayed-inode.c:1118 [inline]
__btrfs_commit_inode_delayed_items+0x15f8/0x1748 fs/btrfs/delayed-inode.c:1141
__btrfs_run_delayed_items+0x1ac/0x514 fs/btrfs/delayed-inode.c:1176
btrfs_run_delayed_items_nr+0x28/0x38 fs/btrfs/delayed-inode.c:1219
flush_space+0x26c/0xb68 fs/btrfs/space-info.c:828
do_async_reclaim_metadata_space+0x110/0x364 fs/btrfs/space-info.c:1158
btrfs_async_reclaim_metadata_space+0x90/0xd8 fs/btrfs/space-info.c:1226
process_one_work+0x7e8/0x155c kernel/workqueue.c:3263
process_scheduled_works kernel/workqueue.c:3346 [inline]
worker_thread+0x958/0xed8 kernel/workqueue.c:3427
kthread+0x5fc/0x75c kernel/kthread.c:463
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:844
-> #0 (&delayed_node->mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x1774/0x30a4 kernel/locking/lockdep.c:5237
lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5868
__mutex_lock_common+0x1d0/0x2678 kernel/locking/mutex.c:598
__mutex_lock kernel/locking/mutex.c:760 [inline]
mutex_lock_nested+0x2c/0x38 kernel/locking/mutex.c:812
__btrfs_release_delayed_node+0xa0/0x9b0 fs/btrfs/delayed-inode.c:290
btrfs_release_delayed_node fs/btrfs/delayed-inode.c:315 [inline]
btrfs_remove_delayed_node+0x68/0x84 fs/btrfs/delayed-inode.c:1326
btrfs_evict_inode+0x578/0xe28 fs/btrfs/inode.c:5587
evict+0x414/0x928 fs/inode.c:810
iput_final fs/inode.c:1914 [inline]
iput+0x95c/0xad4 fs/inode.c:1966
iget_failed+0xec/0x134 fs/bad_inode.c:248
btrfs_read_locked_inode+0xe1c/0x1234 fs/btrfs/inode.c:4101
btrfs_iget+0x1b0/0x264 fs/btrfs/inode.c:5837
btrfs_run_defrag_inode fs/btrfs/defrag.c:237 [inline]
btrfs_run_defrag_inodes+0x520/0xdc4 fs/btrfs/defrag.c:309
cleaner_kthread+0x21c/0x418 fs/btrfs/disk-io.c:1516
kthread+0x5fc/0x75c kernel/kthread.c:463
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:844
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(btrfs-tree-00);
lock(&delayed_node->mutex);
lock(btrfs-tree-00);
lock(&delayed_node->mutex);
*** DEADLOCK ***
1 lock held by btrfs-cleaner/8725:
#0: ffff0000dbeba878 (btrfs-tree-00){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x44/0x2ec fs/btrfs/locking.c:145
stack backtrace:
CPU: 0 UID: 0 PID: 8725 Comm: btrfs-cleaner Not tainted syzkaller #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/03/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
dump_stack+0x1c/0x28 lib/dump_stack.c:129
print_circular_bug+0x324/0x32c kernel/locking/lockdep.c:2043
check_noncircular+0x154/0x174 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x1774/0x30a4 kernel/locking/lockdep.c:5237
lock_acquire+0x14c/0x2e0 kernel/locking/lockdep.c:5868
__mutex_lock_common+0x1d0/0x2678 kernel/locking/mutex.c:598
__mutex_lock kernel/locking/mutex.c:760 [inline]
mutex_lock_nested+0x2c/0x38 kernel/locking/mutex.c:812
__btrfs_release_delayed_node+0xa0/0x9b0 fs/btrfs/delayed-inode.c:290
btrfs_release_delayed_node fs/btrfs/delayed-inode.c:315 [inline]
btrfs_remove_delayed_node+0x68/0x84 fs/btrfs/delayed-inode.c:1326
btrfs_evict_inode+0x578/0xe28 fs/btrfs/inode.c:5587
evict+0x414/0x928 fs/inode.c:810
iput_final fs/inode.c:1914 [inline]
iput+0x95c/0xad4 fs/inode.c:1966
iget_failed+0xec/0x134 fs/bad_inode.c:248
btrfs_read_locked_inode+0xe1c/0x1234 fs/btrfs/inode.c:4101
btrfs_iget+0x1b0/0x264 fs/btrfs/inode.c:5837
btrfs_run_defrag_inode fs/btrfs/defrag.c:237 [inline]
btrfs_run_defrag_inodes+0x520/0xdc4 fs/btrfs/defrag.c:309
cleaner_kthread+0x21c/0x418 fs/btrfs/disk-io.c:1516
kthread+0x5fc/0x75c kernel/kthread.c:463
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:844
Fix this by releasing the path before calling iget_failed().
Reported-by: syzbot+c1c6edb02bea1da754d8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/694530c2.a70a0220.207337.010d.GAE@google.com/
Fixes: 6967399 ("btrfs: push cleanup into btrfs_read_locked_inode()")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
krishnachaitanya-linux
pushed a commit
that referenced
this pull request
Feb 24, 2026
Commit c475c0b("irqchip/riscv-imsic: Remove redundant irq_data lookups") leads to a NULL pointer deference in imsic_msi_update_msg(): virtio_blk virtio1: 8/0/0 default/read/poll queues Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Current kworker/u32:2 pgtable: 4K pagesize, 48-bit VAs, pgdp=0x0000000081c33000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 CPU: 5 UID: 0 PID: 75 Comm: kworker/u32:2 Not tainted 6.19.0-rc4-next-20260109 #1 NONE epc : 0x0 ra : imsic_irq_set_affinity+0x110/0x130 The irq_data argument of imsic_irq_set_affinity() is associated with the imsic domain and not with the top-level MSI domain. As a consequence the code dereferences the wrong interrupt chip, which has the irq_write_msi_msg() callback not populated. Signed-off-by: Luo Haiyang <luo.haiyang@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260113111930821RrC26avITHWSFCN0bYbgI@zte.com.cn
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This is a dummy change