Closed
Conversation
Integrate the Qualcomm Commit Emails Check Action to validate the commit's author and committer email addresses - https://github.com/qualcomm/commit-emails-check-action Signed-off-by: VISHAL KUMAR <viskuma@qti.qualcomm.com>
The QCS8300 Camera clock controller is a derivative of SA8775P, but has few additional clocks and offset differences. Hence, add support for QCS8300 Camera clock controller by extending the SA8775P CamCC. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com> Change-Id: I18a9a199a7dfb822279c9dd7aab2ffe69a89e889 Link: https://lore.kernel.org/all/20250109-qcs8300-mm-patches-new-v4-0-63e8ac268b02@quicinc.com/ Patch-mainline: linux-clk @ 01/09/25, 14:27 Signed-off-by: Shiraz Hashim <quic_shashim@quicinc.com>
Add the global clock controller support for QCS615 SoC. Change-Id: I211757d296f64c52264f679aeff02dd6cd872e90 Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Imran Shaik <quic_imrashai@quicinc.com>
Correct the ngpios entry to account for the UFS_RESET pin being exported as a GPIO in addition to the real GPIOs, allowing the UFS driver to toggle it. Fixes: b698f36 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Change-Id: If4c29ae49c23997129673136091f361df697fa42 Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/all/20241219-correct_gpio_ranges-v2-3-19af8588dbd0@quicinc.com/ Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Need email checker on qcom-next-staging branch only Co-authored-by: Nasser Grainawi <nasser.grainawi@oss.qualcomm.com> Signed-off-by: VISHAL KUMAR <viskuma@qti.qualcomm.com>
ci: Add email checker
Signed-off-by: Vishal Kumar <viskuma@qti.qualcomm.com>
Includes the following components: 1. aws_s3_helper (composite action): - Supports three modes: single-upload, multi-upload, and download - Uploads files to S3 with dynamic paths based on GitHub context - Generates pre-signed URLs for uploaded files - Outputs a single URL or a JSON file of URLs depending on mode - Uploads presigned_urls.json as an artifact in multi-upload mode 2. pull_docker_image (composite action): - Clone kmake-image repository - Build the docker image using kmake-image Dockerfile 3. build (workflow): - Uses an AWS runner to build kernel artifacts - Uses pull_docker_image to get docker image - Builds the kernel using a reusable `build` action - Packages and lists key artifacts (Image, vmlinux, dtb, modules) - Uploads artifacts to S3 using `aws_s3_helper` - Cleans up workspace and appends a build summary 4. build_workspace (composite action): - Downloads required dependencies (ramdisk, systemd-boot) - Builds the kernel using Docker and outputs modules - Packages DLKM into the downloaded ramdisk 5. test_action (composite action): - Parses presigned_urls.json to extract artifact URLs - Updates metadata.json and cloudData.json using Docker + jq - Uploads updated metadata to S3 and injects its URL into cloudData - Adds firmware and ramdisk URLs via pre-signed S3 links - Generates a LAVA job definition using a Python script, qualcomm_linux/job_render repository 6. test (workflow): - Uses pull_docker_image to get docker image - Download artifact URLs list generated by build workflow - Triggers the LAVA job using job definition - Gets the LAVA job results This commit establishes a basic docker-based CI pipeline for kernel builds and automated artifact handling via AWS S3. Signed-off-by: Vishal Kumar <viskuma@qti.qualcomm.com>
… premerge (#9) Signed-off-by: Vishal Kumar <viskuma@qti.qualcomm.com>
Signed-off-by: sgaud-quic <sgaud@qti.qualcomm.com>
sgaud-quic
force-pushed
the
qcom-next-staging
branch
from
33e7185 to
f787833
Compare
Signed-off-by: sgaud-quic <sgaud@qti.qualcomm.com>
Closed
sgaud-quic
force-pushed
the
qcom-next-staging
branch
from
f787833 to
fe1b46c
Compare
Closed
sgaud-quic
force-pushed
the
qcom-next-staging
branch
8 times, most recently
from
55650df to
7cd7350
Compare
sgaud-quic
force-pushed
the
qcom-next-staging
branch
2 times, most recently
from
ead7585 to
1de61d1
Compare
sgaud-quic
force-pushed
the
qcom-next-staging
branch
13 times, most recently
from
a331aac to
ba87907
Compare
sgaud-quic
pushed a commit
that referenced
this pull request
Jul 7, 2025
Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0 Fixes: ec4c7e1 ("lan78xx: Introduce NAPI polling support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250627051346.276029-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sgaud-quic
pushed a commit
that referenced
this pull request
Jul 21, 2025
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check passes
ct->timeout has been altered to reflect the absolute 'best before' date
instead of a relative time. Step 3 will therefore not remove the entry.
Without this change to nf_ct_should_gc() we could still get this sequence:
1. Check if entry has expired.
2. Obtain a reference.
3. Call nf_ct_should_gc() to double-check step 1:
4 - entry is still observed as expired
5 - meanwhile, ct->timeout is corrected to absolute value on other CPU
and confirm bit gets set
6 - confirm bit is seen
7 - valid entry is removed again
First do check 6), then 4) so the gc expiry check always picks up either
confirmed bit unset (entry gets skipped) or expiry re-check failure for
re-inited conntrack objects.
This change cannot be backported to releases before 5.19. Without
commit 8a75a2c ("netfilter: conntrack: remove unconfirmed list")
|= IPS_CONFIRMED line cannot be moved without further changes.
Cc: Razvan Cojocaru <rzvncj@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20250627142758.25664-1-fw@strlen.de/
Link: https://lore.kernel.org/netfilter-devel/4239da15-83ff-4ca4-939d-faef283471bb@gmail.com/
Fixes: 1397af5 ("netfilter: conntrack: remove the percpu dying list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sgaud-quic
pushed a commit
that referenced
this pull request
Sep 8, 2025
BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: <TASK> smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 </TASK> If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems. Fixes: 0ef69e7 ("net/smc: optimize for smc_sndbuf_sync_sg_for_device and smc_rmb_sync_sg_for_cpu") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20250828124117.2622624-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sgaud-quic
pushed a commit
that referenced
this pull request
Sep 16, 2025
Steven Rostedt reported a crash with "ftrace=function" kernel command line: [ 0.159269] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 0.160254] #PF: supervisor read access in kernel mode [ 0.160975] #PF: error_code(0x0000) - not-present page [ 0.161697] PGD 0 P4D 0 [ 0.162055] Oops: Oops: 0000 [#1] SMP PTI [ 0.162619] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc2-test-00006-g48d06e78b7cb-dirty #9 PREEMPT(undef) [ 0.164141] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 0.165439] RIP: 0010:kmem_cache_alloc_noprof (mm/slub.c:4237) [ 0.166186] Code: 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 48 83 e4 f0 48 83 ec 20 8b 05 c9 b6 7e 01 <44> 8b 77 1c 65 4c 8b 2d b5 ea 20 02 4c 89 6c 24 18 41 89 f5 21 f0 [ 0.168811] RSP: 0000:ffffffffb2e03b30 EFLAGS: 00010086 [ 0.169545] RAX: 0000000001fff33f RBX: 0000000000000000 RCX: 0000000000000000 [ 0.170544] RDX: 0000000000002800 RSI: 0000000000002800 RDI: 0000000000000000 [ 0.171554] RBP: ffffffffb2e03b80 R08: 0000000000000004 R09: ffffffffb2e03c90 [ 0.172549] R10: ffffffffb2e03c90 R11: 0000000000000000 R12: 0000000000000000 [ 0.173544] R13: ffffffffb2e03c90 R14: ffffffffb2e03c90 R15: 0000000000000001 [ 0.174542] FS: 0000000000000000(0000) GS:ffff9d2808114000(0000) knlGS:0000000000000000 [ 0.175684] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.176486] CR2: 000000000000001c CR3: 000000007264c001 CR4: 00000000000200b0 [ 0.177483] Call Trace: [ 0.177828] <TASK> [ 0.178123] mas_alloc_nodes (lib/maple_tree.c:176 (discriminator 2) lib/maple_tree.c:1255 (discriminator 2)) [ 0.178692] mas_store_gfp (lib/maple_tree.c:5468) [ 0.179223] execmem_cache_add_locked (mm/execmem.c:207) [ 0.179870] execmem_alloc (mm/execmem.c:213 mm/execmem.c:313 mm/execmem.c:335 mm/execmem.c:475) [ 0.180397] ? ftrace_caller (arch/x86/kernel/ftrace_64.S:169) [ 0.180922] ? __pfx_ftrace_caller (arch/x86/kernel/ftrace_64.S:158) [ 0.181517] execmem_alloc_rw (mm/execmem.c:487) [ 0.182052] arch_ftrace_update_trampoline (arch/x86/kernel/ftrace.c:266 arch/x86/kernel/ftrace.c:344 arch/x86/kernel/ftrace.c:474) [ 0.182778] ? ftrace_caller_op_ptr (arch/x86/kernel/ftrace_64.S:182) [ 0.183388] ftrace_update_trampoline (kernel/trace/ftrace.c:7947) [ 0.184024] __register_ftrace_function (kernel/trace/ftrace.c:368) [ 0.184682] ftrace_startup (kernel/trace/ftrace.c:3048) [ 0.185205] ? __pfx_function_trace_call (kernel/trace/trace_functions.c:210) [ 0.185877] register_ftrace_function_nolock (kernel/trace/ftrace.c:8717) [ 0.186595] register_ftrace_function (kernel/trace/ftrace.c:8745) [ 0.187254] ? __pfx_function_trace_call (kernel/trace/trace_functions.c:210) [ 0.187924] function_trace_init (kernel/trace/trace_functions.c:170) [ 0.188499] tracing_set_tracer (kernel/trace/trace.c:5916 kernel/trace/trace.c:6349) [ 0.189088] register_tracer (kernel/trace/trace.c:2391) [ 0.189642] early_trace_init (kernel/trace/trace.c:11075 kernel/trace/trace.c:11149) [ 0.190204] start_kernel (init/main.c:970) [ 0.190732] x86_64_start_reservations (arch/x86/kernel/head64.c:307) [ 0.191381] x86_64_start_kernel (??:?) [ 0.191955] common_startup_64 (arch/x86/kernel/head_64.S:419) [ 0.192534] </TASK> [ 0.192839] Modules linked in: [ 0.193267] CR2: 000000000000001c [ 0.193730] ---[ end trace 0000000000000000 ]--- The crash happens because on x86 ftrace allocations from execmem require maple tree to be initialized. Move maple tree initialization that depends only on slab availability earlier in boot so that it will happen right after mm_core_init(). Link: https://lkml.kernel.org/r/20250824130759.1732736-1-rppt@kernel.org Fixes: 5d79c2b ("x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations") Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reported-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Closes: https://lore.kernel.org/all/20250820184743.0302a8b5@gandalf.local.home/ Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
4 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.