cleanup StarFive JH7100 GPIO driver and device tree #23

pdp7 · 2021-05-31T08:34:36Z

This is my initial attempt to clean up the obvious issues with the StarFive JH7100 GPIO driver:

add StarFive as vendor prefix [I have posted this to the device-tree list]
rename GPIO driver from VIC to JH7100
fix checkpatch warnings for GPIO driver
add SPDX license headers
rename the board dts from jh7100-starlight to beaglev-starlight-jh7100

@esmil please let me know if you prefer me raising a PR against https://github.com/esmil/linux instead

Add vendor prefix for StarFive Technology Co. Ltd [1]. StarFive was formed in 2018 and has now produced their first SoC, the JH7100, which contains 64-bit RISC-V cores [2]. It used in the BeagleV Starlight [3]. [1] https://starfivetech.com/site/company [2] https://github.com/beagleboard/beaglev-starlight [3] https://github.com/starfive-tech/beaglev_doc Signed-off-by: Drew Fustini <drew@beagleboard.org>

Add bindings for the GPIO controller in the StarFive JH7100 SoC [1]. [1] https://github.com/starfive-tech/beaglev_doc Signed-off-by: Drew Fustini <drew@beagleboard.org>

VIC was a StarFive internal project name, thus rename to JH7100 which is the public SoC name [1]. This is SoC is used on the BeagleV Starlight JH7100 board [2]. [1] https://github.com/starfive-tech/beaglev_doc [2] https://github.com/beagleboard/beaglev-starlight Signed-off-by: Drew Fustini <drew@beagleboard.org>

Signed-off-by: Drew Fustini <drew@beagleboard.org>

Add SPDX-License-Identifier and reformat copyright information Signed-off-by: Drew Fustini <drew@beagleboard.org>

Rename gpio controller compatible from "starfive,gpio0" to "starfive,jh7100" Signed-off-by: Drew Fustini <drew@beagleboard.org>

Add SPDX-License-Identifier and copyright information Signed-off-by: Drew Fustini <drew@beagleboard.org>

Remove the uneeded reg-names property from the gpio controller node. Signed-off-by: Drew Fustini <drew@beagleboard.org>

Rename the dts file from jh7100-starlight.dts to the more accurate name of beaglev-starlight-jh7100.dts Signed-off-by: Drew Fustini <drew@beagleboard.org>

Update the build instructions to use beaglev-starlight-jh7100.dtb Signed-off-by: Drew Fustini <drew@beagleboard.org>

esmil

I love it until here and have already pushed the gpio changes to the starlight branch.

I must admit though, that I really like the scheme that I think is best enforced by arch/arm64/boot/dts/rockchip right now, where the files are named from most generic to most specific. It makes it really obvious which files builds on which when you see

rk3399-gru-kevin.dts
rk3399-gru-scarlet-inx.dts
rk3399-gru-scarlet-kd.dts
rk3399-gru-scarlet.dtsi
rk3399-gru.dtsi
rk3399.dtsi

I know none of arch/riscv/boot/dts uses this scheme and even rockchip has exceptions, but I hope it's not too late have some sort of order in arch/riscv/boot/dts/starfive.

esmil · 2021-05-31T14:38:21Z

To put it another way. I strongly prefer this

jh7100-starlight.dts
jh7100.dtsi
jh7110-arvsom-app1.dts
jh7110-arvsom-app2.dts
jh7110-arvsom-devboard.dts
jh7110-arvsom.dtsi
jh7110-starlight.dts
jh7110.dtsi
jh71x0.dtsi

..over this

antmicro-arvsom-jh7110.dtsi
antmicro-devboard-jh7110.dts
beaglev-starlight-jh7100.dts
beaglev-starlight-jh7110.dts
firstcompany-app1.dts
jh7100.dtsi
jh7110.dtsi
jh71x0.dtsi
secondcompany-app2.dts

pdp7 · 2021-05-31T18:04:47Z

@esmil

To put it another way. I strongly prefer this

jh7100-starlight.dts
jh7100.dtsi
jh7110-arvsom-app1.dts
jh7110-arvsom-app2.dts
jh7110-arvsom-devboard.dts
jh7110-arvsom.dtsi
jh7110-starlight.dts
jh7110.dtsi
jh71x0.dtsi

..over this

Yes, I agree. I was trying to avoid the bare "starlight" as the board name should be thought of atomic phrase "beaglev-starlight". Thus, I think jh7100-beaglev-starlight.dts sounds like the best name for the current board.

Note, there will be boards with the JH7100 beyond just these beta prototypes so like the naming of jh71100-beaglev-starlight.dts and jh7100-beaglev-starlight.dts

geertu · 2021-06-01T09:10:41Z

@pdp7 Please make the following change to the example in the GPIO DT bindings:

- reg = <0x0 0x11910000 0x0 0x10000>;
+ reg = <0x11910000 0x10000>;

and drop the surrounding "soc" node and related #{address,size}-cells.
By convention, all examples on the MMIO bus use #{address,size}-cells = <1>.

pdp7 · 2021-06-01T15:26:18Z

@geertu thanks! I will make that change.

That 4 value notion looked weird to be which led me down a long path of reading about reg properties and address ranges :) What you suggested does look easier to understand to me.

Just to make sure my understanding is correct. Does the old 4 value line mean this?

reg = <0x0 0x11910000 0x0 0x10000>;

Position 1: Bus address is 0x0, this is what the GPIO controller thinks it is
Position 2: CPU address is 0x11910000, this is how the CPU sees the GPIO controller base register offset
Position 3: upper 32 bits of 64 bit size which is 0x0
Position 4: lower 32 bits of 64 bit size which is 0x10000, which is 64KB

geertu · 2021-06-01T15:29:41Z

@geertu thanks! I will make that change.

That 4 value notion looked weird to be which led me down a long path of reading about reg properties and address ranges :) What you suggested does look easier to understand to me.

Just to make sure my understanding is correct. Does the old 4 value line mean this?
reg = <0x0 0x11910000 0x0 0x10000>;
Position 1: Bus address is 0x0

Position 2: CPU address is 0x11910000

Almost correct: as #address-cells was 2, the first two numbers formed a 64-bit physical CPU address.

Position 3: upper 32 bits of 64 bit size which is 0x0

Position 4: lower 32 bits of 64 bit size which is 0x10000

Correct: as #size-cells was 2, the second set of two numbers formed a 64-bit size.

pdp7 · 2021-06-02T07:16:53Z

@geertu thanks, I have made those changes and the checks seem to pass ok:

pdp7@x1:~/dev/starfive/linux$ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.yaml
  CHKDT   Documentation/devicetree/bindings/processed-schema-examples.json
  DTEX    Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dts
/home/pdp7/dev/starfive/linux/Documentation/devicetree/bindings/media/renesas,drif.yaml: properties:clock-names:maxItems: False schema does not allow 1
	hint: "minItems/maxItems" equal to the "items" list length are not necessary
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
  SCHEMA  Documentation/devicetree/bindings/processed-schema-examples.json
/home/pdp7/dev/starfive/linux/Documentation/devicetree/bindings/media/renesas,drif.yaml: ignoring, error in schema: properties: clock-names: maxItems
warning: no schema found in file: ./Documentation/devicetree/bindings/media/renesas,drif.yaml
  DTC     Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dt.yaml
  CHECK   Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dt.yaml
/home/pdp7/dev/starfive/linux/Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dt.yaml: example-0: gpio@11910000:reg:0: [0, 294715392, 0, 65536] is too long
	From schema: /home/pdp7/.local/lib/python3.8/site-packages/dtschema/schemas/reg.yaml

pdp7@x1:~/dev/starfive/linux$ make -j8 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.yaml

The commits are in https://github.com/starfive-tech/linux/tree/fix-dts-gpio-reg-esmil_starlight:

riscv: dts: starfive-jh7100: change gpio reg property
dt-bindings: gpio: fix starfive,jh7100-gpio bindings example

pdp7 · 2021-06-02T07:19:46Z

@esmil @geertu pull request here: #25

geertu · 2021-06-02T07:22:20Z

@pdp7 Seems like you misunderstood:

The example should use "reg = <0x11910000 0x10000>;" (examples use #{address,size}-cells = <1>),
The actual DTS should use "reg = <0x0 0x11910000 0x0 0x10000>;" (real DTS has #{address,size}-cells = <2>).

DTC Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dt.yaml
CHECK Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dt.yaml
/home/pdp7/dev/starfive/linux/Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.example.dt.yaml: example-0: gpio@11910000:reg:0: [0, 294715392, 0, 65536] is too long

Hence it complains about the example.
There should be another complaint for the DTS ("make dtbs_check").

pdp7 · 2021-06-02T16:08:21Z

@geertu Ah! Thank you for explaining that. I failed to see the example-0: gpio@11910000:reg:0: [0, 294715392, 0, 65536] is too long in the output.

Unrelated, but any idea why I might be seeing those warnings for Documentation/devicetree/bindings/media/renesas,drif.yaml?

geertu · 2021-06-02T18:32:16Z

Unrelated, but any idea why I might be seeing those warnings for Documentation/devicetree/bindings/media/renesas,drif.yaml?

@pdp7 Because https://lore.kernel.org/r/20210408202436.3706-1-fabrizio.castro.jz@renesas.com hasn't been applied yet.

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers a warning calltrace like below: cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24 cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0 ================================================================================ UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] When both bitoffset and otp_map[i].size are 0, the line 836 will result in GENMASK(-1, 0), this triggers the shift-out-of-bounds calltrace. Here add a checking, if both bitoffset and otp_map[i].size are 0, do not run GENMASK() and directly set otp_val to 0, this will not bring any function change on the driver but could avoid the calltrace. Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>

[ Upstream commit 0b3d5d2 ] We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers a warning calltrace like below: cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24 cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0 ================================================================================ UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] When both bitoffset and otp_map[i].size are 0, the line 836 will result in GENMASK(-1, 0), this triggers the shift-out-of-bounds calltrace. Here add a checking, if both bitoffset and otp_map[i].size are 0, do not run GENMASK() and directly set otp_val to 0, this will not bring any function change on the driver but could avoid the calltrace. Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9f34290 ] The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN to report a shift-out-of-bounds warning in the cs35l41_otp_unpack() since the last entry in the array will result in GENMASK(-1, 0). UBSAN reports this problem: UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] ? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c] i2c_device_probe+0x252/0x2b0 Fixes: 6450ef5 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier") Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit e9b1a4f ] After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57 ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9cc205e upstream. Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: fab957c ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The UAF bug occurred because we were putting DFS root sessions in cifs_umount() while DFS cache refresher was being executed. Make DFS root sessions have same lifetime as DFS tcons so we can avoid the use-after-free bug is DFS cache refresher and other places that require IPCs to get new DFS referrals on. Also, get rid of mount group handling in DFS cache as we no longer need it. This fixes below use-after-free bug catched by KASAN [ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56 [ 379.948096] [ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23 [ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 379.949942] Call Trace: [ 379.950113] <TASK> [ 379.950260] dump_stack_lvl+0x50/0x67 [ 379.950510] print_report+0x16a/0x48e [ 379.950759] ? __virt_addr_valid+0xd8/0x160 [ 379.951040] ? __phys_addr+0x41/0x80 [ 379.951285] kasan_report+0xdb/0x110 [ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs] [ 379.953637] ? __pfx___mutex_lock+0x10/0x10 [ 379.953915] ? lock_release+0xb6/0x720 [ 379.954167] ? __pfx_lock_acquire+0x10/0x10 [ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs] [ 379.954960] ? __pfx_wb_workfn+0x10/0x10 [ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs] [ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs] [ 379.956323] ? __pfx_lock_acquired+0x10/0x10 [ 379.956615] ? read_word_at_a_time+0xe/0x20 [ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220 [ 379.957235] process_one_work+0x535/0x990 [ 379.957509] ? __pfx_process_one_work+0x10/0x10 [ 379.957812] ? lock_acquired+0xb7/0x5f0 [ 379.958069] ? __list_add_valid+0x37/0xd0 [ 379.958341] ? __list_add_valid+0x37/0xd0 [ 379.958611] worker_thread+0x8e/0x630 [ 379.958861] ? __pfx_worker_thread+0x10/0x10 [ 379.959148] kthread+0x17d/0x1b0 [ 379.959369] ? __pfx_kthread+0x10/0x10 [ 379.959630] ret_from_fork+0x2c/0x50 [ 379.959879] </TASK> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Steve French <stfrench@microsoft.com>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

From: Gabriel Krisman Bertazi <krisman@suse.de> [ upstream commit bd6fc5d ] Syzbot reported a null-ptr-deref of sqd->thread inside io_sqpoll_wq_cpu_affinity. It turns out the sqd->thread can go away from under us during io_uring_register, in case the process gets a fatal signal during io_uring_register. It is not particularly hard to hit the race, and while I am not sure this is the exact case hit by syzbot, it solves it. Finally, checking ->thread is enough to close the race because we locked sqd while "parking" the thread, thus preventing it from going away. I reproduced it fairly consistently with a program that does: int main(void) { ... io_uring_queue_init(RING_LEN, &ring1, IORING_SETUP_SQPOLL); while (1) { io_uring_register_iowq_aff(ring, 1, &mask); } } Executed in a loop with timeout to trigger SIGTERM: while true; do timeout 1 /a.out ; done This will hit the following BUG() in very few attempts. BUG: kernel NULL pointer dereference, address: 00000000000007a8 PGD 800000010e949067 P4D 800000010e949067 PUD 10e46e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 15715 Comm: dead-sqpoll Not tainted 6.5.0-rc7-next-20230825-g193296236fa0-dirty starfive-tech#23 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:io_sqpoll_wq_cpu_affinity+0x27/0x70 Code: 90 90 90 0f 1f 44 00 00 55 53 48 8b 9f 98 03 00 00 48 85 db 74 4f 48 89 df 48 89 f5 e8 e2 f8 ff ff 48 8b 43 38 48 85 c0 74 22 <48> 8b b8 a8 07 00 00 48 89 ee e8 ba b1 00 00 48 89 df 89 c5 e8 70 RSP: 0018:ffffb04040ea7e70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff93c010749e40 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffa7653331 RDI: 00000000ffffffff RBP: ffffb04040ea7eb8 R08: 0000000000000000 R09: c0000000ffffdfff R10: ffff93c01141b600 R11: ffffb04040ea7d18 R12: ffff93c00ea74840 R13: 0000000000000011 R14: 0000000000000000 R15: ffff93c00ea74800 FS: 00007fb7c276ab80(0000) GS:ffff93c36f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000007a8 CR3: 0000000111634003 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x154/0x440 ? do_user_addr_fault+0x174/0x7b0 ? exc_page_fault+0x63/0x140 ? asm_exc_page_fault+0x22/0x30 ? io_sqpoll_wq_cpu_affinity+0x27/0x70 __io_register_iowq_aff+0x2b/0x60 __io_uring_register+0x614/0xa70 __x64_sys_io_uring_register+0xaa/0x1a0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fb7c226fec9 Code: 2e 00 b8 ca 00 00 00 0f 05 eb a5 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 7f 2d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe2c0674f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb7c226fec9 RDX: 00007ffe2c067530 RSI: 0000000000000011 RDI: 0000000000000003 RBP: 00007ffe2c0675d0 R08: 00007ffe2c067550 R09: 00007ffe2c067550 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe2c067750 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: 00000000000007a8 ---[ end trace 0000000000000000 ]--- Reported-by: syzbot+c74fea926a78b8a91042@syzkaller.appspotmail.com Fixes: ebdfefc ("io_uring/sqpoll: fix io-wq affinity when IORING_SETUP_SQPOLL is used") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Link: https://lore.kernel.org/r/87v8cybuo6.fsf@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 starfive-tech#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 starfive-tech#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 starfive-tech#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 starfive-tech#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 starfive-tech#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 starfive-tech#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 starfive-tech#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 starfive-tech#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 starfive-tech#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 starfive-tech#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 starfive-tech#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 starfive-tech#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 starfive-tech#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 starfive-tech#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 starfive-tech#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 starfive-tech#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 starfive-tech#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 starfive-tech#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 starfive-tech#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 starfive-tech#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 starfive-tech#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 starfive-tech#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 starfive-tech#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 starfive-tech#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 starfive-tech#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 starfive-tech#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) starfive-tech#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 starfive-tech#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 starfive-tech#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 starfive-tech#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 starfive-tech#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 starfive-tech#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 starfive-tech#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 starfive-tech#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 starfive-tech#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 starfive-tech#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 starfive-tech#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 starfive-tech#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 starfive-tech#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 starfive-tech#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 starfive-tech#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 starfive-tech#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 starfive-tech#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 starfive-tech#20 0x55c9400e53ad in main tools/perf/perf.c:561 starfive-tech#21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 starfive-tech#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 starfive-tech#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 starfive-tech#1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) starfive-tech#2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) starfive-tech#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 starfive-tech#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 starfive-tech#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 starfive-tech#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 starfive-tech#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 starfive-tech#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 starfive-tech#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 starfive-tech#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 starfive-tech#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 starfive-tech#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 starfive-tech#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 starfive-tech#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 starfive-tech#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 starfive-tech#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 starfive-tech#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 starfive-tech#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 starfive-tech#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 starfive-tech#20 0x55c9400e53ad in main tools/perf/perf.c:561 starfive-tech#21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 starfive-tech#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 starfive-tech#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

pdp7 added 11 commits May 31, 2021 01:14

dt-bindings: gpio: add starfive,jh7100-gpio bindings

a6d9548

Add bindings for the GPIO controller in the StarFive JH7100 SoC [1]. [1] https://github.com/starfive-tech/beaglev_doc Signed-off-by: Drew Fustini <drew@beagleboard.org>

gpio: starfive-jh7100: fix checkpatch warnings

1286ba3

Signed-off-by: Drew Fustini <drew@beagleboard.org>

gpio: starfive-jh7100: add SPDX-License-Identifier

6597905

Add SPDX-License-Identifier and reformat copyright information Signed-off-by: Drew Fustini <drew@beagleboard.org>

gpio: starfive-jh7100: rename gpio compatible

8590af8

Rename gpio controller compatible from "starfive,gpio0" to "starfive,jh7100" Signed-off-by: Drew Fustini <drew@beagleboard.org>

riscv: dts: starfive-jh7100: rename gpio compatible

d567ae8

Rename gpio controller compatible from "starfive,gpio0" to "starfive,jh7100" Signed-off-by: Drew Fustini <drew@beagleboard.org>

riscv: dts: starfive-jh7100: add SPDX-License-Identifier

7ed9759

Add SPDX-License-Identifier and copyright information Signed-off-by: Drew Fustini <drew@beagleboard.org>

riscv: dts: starfive-jh7100: remove reg-names from gpio node

76e4a97

Remove the uneeded reg-names property from the gpio controller node. Signed-off-by: Drew Fustini <drew@beagleboard.org>

riscv: dts: rename dts for BeagleV Starlight JH7100

6f480dd

Rename the dts file from jh7100-starlight.dts to the more accurate name of beaglev-starlight-jh7100.dts Signed-off-by: Drew Fustini <drew@beagleboard.org>

update build instructions for dtb rename

9d7c74e

Update the build instructions to use beaglev-starlight-jh7100.dtb Signed-off-by: Drew Fustini <drew@beagleboard.org>

pdp7 requested a review from esmil May 31, 2021 08:34

esmil reviewed May 31, 2021

View reviewed changes

pdp7 closed this May 31, 2021

pdp7 mentioned this pull request Jun 2, 2021

Fix dts gpio reg esmil starlight #25

Closed

pdp7 deleted the gpio-cleanup-esmil_starlight branch June 2, 2021 16:09

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

cleanup StarFive JH7100 GPIO driver and device tree #23

cleanup StarFive JH7100 GPIO driver and device tree #23

pdp7 commented May 31, 2021

esmil left a comment •

edited

Loading

esmil commented May 31, 2021 •

edited

Loading

pdp7 commented May 31, 2021 •

edited

Loading

geertu commented Jun 1, 2021

pdp7 commented Jun 1, 2021 •

edited

Loading

geertu commented Jun 1, 2021

pdp7 commented Jun 2, 2021

pdp7 commented Jun 2, 2021

geertu commented Jun 2, 2021

pdp7 commented Jun 2, 2021

geertu commented Jun 2, 2021

cleanup StarFive JH7100 GPIO driver and device tree #23

cleanup StarFive JH7100 GPIO driver and device tree #23

Conversation

pdp7 commented May 31, 2021

esmil left a comment • edited Loading

Choose a reason for hiding this comment

esmil commented May 31, 2021 • edited Loading

pdp7 commented May 31, 2021 • edited Loading

geertu commented Jun 1, 2021

pdp7 commented Jun 1, 2021 • edited Loading

geertu commented Jun 1, 2021

pdp7 commented Jun 2, 2021

pdp7 commented Jun 2, 2021

geertu commented Jun 2, 2021

pdp7 commented Jun 2, 2021

geertu commented Jun 2, 2021

esmil left a comment •

edited

Loading

esmil commented May 31, 2021 •

edited

Loading

pdp7 commented May 31, 2021 •

edited

Loading

pdp7 commented Jun 1, 2021 •

edited

Loading