Spacing edition
Pre-release
Pre-release
This branch may turn into the stable one. I just want to iron out the last bugs with a beta before.
There is still some problems on the code generation (mainly for multi-extruders printers), but these will be taken care on the next version.
known issues
- windows: delete the opengl32.dll to get back normal performance.
- windows: translations are borked (unless you use the uft-8 mode)
- I again made an error when naming the zip ><
new
- Now you can set the spacing between extrusion lines.
- There are two ways of deciding the 'width' of an extrusion line: by width or by spacing. One is set, and the other is computed over the other. The computed one has its label grey.
- Set one will update the other one, taken into account the current layer height.
- If you're using variable layer height, it's the (computed) width that is used, so the spacing will be different: bigger on big layer, and thinner on thin layers.
- you have a little help image below (the help collapsible thingy) to explain the difference between width and spacing.
- add icons on tabs (can be disabled/resized in preferences)
- added a fourth option in the gui layout option : tab
- Allow going back to sliced preview without the trick of modifying a printer setting.
- All tabs are on the same bar instead of splitting them between the top bar and the bottom.
- As it's a bit hacky (the panel has to be moved between tabs), some linux distribution may have some quirks with this option.
- Vendor profiles have been moved to slic3r/slic3r-profiles. You have to git submodule update if you clone this repo.
- add start_gcode_manual to disable automatic 'start gcode' output #875 (in the Custom G-code tab). Note that it won't print anything, you have to ensure that you write everything needed in your Start Gcode section.
- Update localization tools, now written in python and takes into account the ui_layout ini files.
- Allow to choose the splashscreen. Can be random.
- Update VORON cube to current version. Thanks to Benoit Miller
- out-of-bounds objects RED instead of blue. Thanks to Pavulon87
- Add
export to prusa
menu item (so you're not limited to the .3mf that is already compatible) - gui colors are now modifiable in preferences
- default gui colors are in colors.ini
- Implement option from old Slic3r mainline to permit printer firmware to define their fan speeds from 0-100 instead of 0-255. Thanks to Joseph Lenox
- #949 Consolidate what is a "project": The project is the current .3mf (even if not saved/named yet, it start with an empty one)
- ask for saving the project if unsaved changes
- ask for preset reset if new project
- delete all : new project or just delete
- need some more works, as there may still exist some incoherencies
bugfixes
- Fix firmware min_length (may be the cause of some unwanted model simplification)
- Revert "only one perimeter on top" to october algorithm.
- if some letters on top of a flat surface create problems, set min_width_top_surface to 0 (on this layer only if needed).
- Allow to have no prusa profiles.
- write some initialisation lines at the right line #1121
- Fix fan speed on overhangs #1127
- fix loading prusa conf
- fix polyhole algo
- add a hole_to_polyhole_threshold to allow a user-defined margin (because not all circles are perfect) #924
- do not considerate ngons as circle if n<9
- Fix deadlock when canceling the slicing while creating thumbnails
- Fix clipper::union adding extremely small holes even with safety_offset
- fix anchor_length > anchor_length_max error
- fix macos icns #1086
- Fix for auto-heating when using one extruder from many #1103
- #1083 Make deselectable the automatic switch from tabs during background processing
- #1076 adjust color changes for z_offset
- #1073 fix Infill doesn´t switch to Rectilinear at 100%
- no infill: allow margins and denser infill
- fix crash on slice if no extruder names
- fix error when no settings directory
- Implement more tests. Thanks to Joseph Lenox
- #922 Infill bridge issues
- #944 Spiral vase mode should now turn off some of SuperSlicer's new settings
- #979 Thumbnail sizes gui bug
- #988 don't use the cost-based field in other seam algo.
- #1005 Draft shield if complete objects
- #1007 fix temperature calibration
- #1016 Multimaterial Toolchange Temperature can now be set to a value below 175°C
- #1002 ironing post-process angle
- #995 thin wall bug (boost voronoi bug) mitigation
note: I haven't tested the linux & macos build.
You can have daily builds in the action menu of github.
You can support me with the "sponsor" button