Made the docs better and fixed the port in validator systemd

pages/docs/ecosystem-roles/relayer/anchor-update.mdx

@@ -54,7 +54,7 @@ An example configuration file for the Goerli network that is configured for gove
   You will need to update the linked-anchors and contract addresses for the applicable chains.
 </Callout>
 
-```
+```sh filename="config file" copy
 [[evm.goerli.contracts]]
 contract = "VAnchor"
 address = "0x03b88eD9Ff9bE84e4baD3F55D67AE5ABA610523C"

pages/docs/ecosystem-roles/relayer/data-querying.mdx

@@ -33,7 +33,7 @@ An example configuration file for the Goerli network that is configured for gove
   You will need to update the linked-anchors and contract addresses for the applicable chains.
 </Callout>
 
-```
+```sh filename="config file" copy
 [[evm.goerli.contracts]]
 contract = "VAnchor"
 address = "0x03b88eD9Ff9bE84e4baD3F55D67AE5ABA610523C"

pages/docs/ecosystem-roles/relayer/private-tx.mdx

@@ -53,7 +53,7 @@ An example configuration file for the goerli network and VAnchor contract should
   You will need to update the linked-anchors and contract addresses for the applicable chains.
 </Callout>
 
-```
+```sh filename="config file" copy
 [[evm.goerli.contracts]]
 contract = "VAnchor"
 address = "0x03b88eD9Ff9bE84e4baD3F55D67AE5ABA610523C"

pages/docs/ecosystem-roles/relayer/running-relayer/cli-usage.mdx

@@ -17,14 +17,14 @@ to the end of the command. The command will vary depending on how you choose to
 <Tabs items={["docker", "systemd"]} storageKey="selected-binary">
   <Tab>
 
-    ```
+    ```sh filename="docker run" copy
     docker run --platform linux/amd64 ghcr.io/webb-tools/relayer:0.5.0-rc1 --help
     ```
 
   </Tab>
   <Tab>
 
-    ```
+    ```sh filename="help" copy
     # If you used the release binary from github
     ./webb-relayer --help
 
@@ -37,13 +37,13 @@ to the end of the command. The command will vary depending on how you choose to
 
 Start the relayer from a config file:
 
-```
+```sh filename="config file" copy
 webb-relayer -vvv -c <CONFIG_FILE_PATH>
 ```
 
 USAGE:
 
-```
+```sh filename="usage" copy
 webb-relayer [FLAGS] [OPTIONS]
 ```
 
@@ -55,31 +55,31 @@ The below lists outlines the available flags for your convienance.
 
 Prints help information
 
-```sh
+```sh filename="help" copy
 webb-relayer --help
 ```
 
 #### `--tmp`
 
 Create the Database Store in a temporary directory and will be deleted when the process exits
 
-```sh
+```sh filename="tmp" copy
 webb-relayer --tmp
 ```
 
 #### `--version`
 
 Prints relayer version information
 
-```sh
+```sh filename="version" copy
 webb-relayer --version
 ```
 
 #### `--verbose`
 
 A level of verbosity, and can be used multiple times
 
-```sh
+```sh filename="vvvv" copy
 webb-relayer --vvvv
 ```
 
@@ -89,6 +89,6 @@ webb-relayer --vvvv
 
 Directory that contains configration files
 
-```sh
+```sh filename="config-dir" copy
 webb-relayer --config dir ./config
 ```

pages/docs/ecosystem-roles/relayer/running-relayer/cloud-setup.mdx

@@ -27,30 +27,30 @@ Following the instructions below, you will be able to run the relayer as a syste
 
 **Update Ubuntu packages**
 
-```
+```sh filename="apt update" copy
 # Update ubuntu packages
 sudo apt update && sudo apt upgrade
 ```
 
 **Update Snap package**
 
-```
+```sh filename="apt install" copy
 # Update snap packages
 sudo apt install -y snapd
 sudo snap install core; sudo snap refresh core
 ```
 
 **Install dependencies**
 
-```
+```sh filename="apt install" copy
 # Install dependencies
 sudo apt install gcc cmake pkg-config libssl-dev git clang libclang-dev
 sudo apt install build-essential
 ```
 
 **Install Rust**
 
-```
+```sh filename="rust" copy
 # Install rust
 curl https://sh.rustup.rs -sSf | sh -s -- -y
 export PATH=~/.cargo/bin:$PATH
@@ -59,14 +59,14 @@ source ~/.cargo/env
 
 **Install Certbot**
 
-```
+```sh filename="certbot" copy
 # Install certbot
 sudo snap install --classic certbot && sudo ln -s /snap/bin/certbot /usr/bin/certbot
 ```
 
 **Build Relayer from source**
 
-```
+```sh filename="build" copy
 # Build from source
 git clone https://github.com/webb-tools/relayer.git
 cd relayer && cargo build --release --features cli
@@ -78,17 +78,13 @@ cd relayer && cargo build --release --features cli
 
 Let's first create a service file for the relayer:
 
-```
-# Create the service file
-sudo touch /etc/systemd/system/webb-relayer.service
-```
-
 Next, we will paste the following into the service file, and replace the `<user>` with the user that will be running the relayer:
 
-```
-# This assumes the repo has been cloned in the home directory of the user
-# Paste the following into the service file, and replace the <user>:
+- This assumes the repo has been cloned in the home directory of the user
+- Paste the following into the service file, and replace the `<user>`:
 
+```
+sudo tee /etc/systemd/system/webb-relayer.service > /dev/null << EOF
 [Unit]
 Description=WebbRelayer
 
@@ -99,11 +95,12 @@ ExecStart=cargo run --features cli --bin webb-relayer -- -c /home/<user>/relayer
 
 [Install]
 WantedBy=multi-user.target
+EOF
 ```
 
 2. Enable and start the system service:
 
-```
+```sh filename="enable & start" copy
 sudo systemctl enable webb-relayer && sudo systemctl start webb-relayer
 ```
 
@@ -113,15 +110,15 @@ sudo systemctl enable webb-relayer && sudo systemctl start webb-relayer
 
 2. Install nginx if it isn't already on your machine:
 
-```
+```sh filename="nginx" copy
 sudo apt install nginx
 ```
 
 **First, we will configure the endpoint linked to your domain name at port 80 for certificate generation**
 
 3. Create nginx site files for your domain:
 
-```
+```sh filename="site files" copy
 cd /etc/nginx/sites-available &&
 
 sudo cp default <domain name> &&
@@ -131,7 +128,7 @@ sudo ln -s /etc/nginx/sites-available/<domain name> /etc/nginx/sites-enabled/
 
 4. Modify the nginx sites-available file to:
 
-```
+```console filename="default" copy
 server {
     listen 80;
     listen [::]:80;
@@ -149,27 +146,27 @@ server {
 
 5. Check the nginx configuration
 
-```
+```sh filename="status nginx" copy
 sudo nginx -t
 ```
 
 6. If no issues exist, restart the nginx service:
 
-```
+```sh filename="restart nginx" copy
 sudo systemctl restart nginx
 ```
 
 **Next we will create the self-signed certificate and reconfigure for https and wss support**
 
 7. Create the self-signed certificate:
 
-```
+```sh filename="certonly" copy
 sudo certbot certonly --nginx
 ```
 
 8. Modify the nginx site file:
 
-```
+```sh filename="site file" copy
 map $http_upgrade $connection_upgrade {
     default upgrade;
     '' close;
@@ -207,19 +204,23 @@ server {
 
 9. Check Nginx configuration and restart the service:
 
-```
+```sh filename="restart nginx" copy
 sudo nginx -t && sudo systemctl restart nginx
 ```
 
 ### Monitoring Setup
 
 Relayers will want to setup monitoring to ensure maximum uptime and automatic restarts when things go awry.
 
-1. `sudo apt install -y monit`
+1. Install monit
+
+```sh filename="install monit" copy
+sudo apt install -y monit
+```
 
 2. modify the monitrc file at: `/etc/monit/monitrc`
 
-```
+```sh filename="monitrc" copy
 set httpd port 2812 and
 use address localhost
 allow localhost
@@ -243,7 +244,7 @@ check process webb-relayer matching target/release/webb-relayer
 
 3. restart monit and validate:
 
-```
+```sh filename="restart & validate" copy
 sudo monit reload && sudo monit validate
 ```
 

pages/docs/ecosystem-roles/relayer/running-relayer/quick-start.mdx

@@ -29,15 +29,15 @@ Before you begin, ensure that you have the following prerequisites:
 
 1. Open your terminal and run the following command to download the latest version of the relayer:
 
-```bash
+```sh filename="download latest version" copy
 curl -fsSL https://git.io/get-webb-relayer.sh | sh
 ```
 
 The script will download the relayer binary (or update it if it already exists) and place it in your `$HOME/.webb` directory. The script will also suggest adding the directory to your `PATH` environment variable.
 
 Alternatively, if you wish to download a specific version of the relayer, run the following command:
 
-```bash
+```sh filename="download specific version" copy
 curl -fsSL https://git.io/get-webb-relayer.sh | sh -s <version>
 ```
 
@@ -48,7 +48,7 @@ will also suggest adding the directory to your `PATH` environment variable.
 
 2. Verify that the relayer was installed successfully by running the following command:
 
-```bash
+```sh filename="verify version" copy
 ~/.webb/webb-relayer --version
 ```
 
@@ -71,14 +71,14 @@ To download the example configuration file, run the following command:
 <Tabs items={["Linux/WSL", "macOS"]} storageKey="selected-binary">
   <Tab>
 
-    ```bash
+    ```sh filename="download" copy
     curl -fsSL https://raw.githubusercontent.com/webb-tools/relayer/main/config/example/config.toml -o ~/.config/webb-relayer/config.toml
     ```
 
   </Tab>
   <Tab>
 
-    ```bash
+    ```sh filename="download" copy
     curl -fsSL https://raw.githubusercontent.com/webb-tools/relayer/main/config/example/config.toml -o ~/Library/Application\ Support/tools.webb.webb-relayer/config.toml
     ```
 
@@ -100,7 +100,7 @@ For example, if you want to override the `port` value in the configuration file,
 
 For example, to modify the `port` value using the environment variable, you can do the following:
 
-```bash
+```sh filename="export" copy
 export WEBB_PORT=9955
 ```
 
@@ -110,7 +110,7 @@ For our example configuration file, the following environment variables are requ
 
 create a new file called `.env` in the same directory as your current directory and add the following line:
 
-```bash
+```sh filename="PRIVATE_KEY" copy
 # Hex-encoded private for the relayer (64 characters) prefixed with 0x
 PRIVATE_KEY="0x..."
 ```
@@ -121,7 +121,7 @@ save the file and exit the editor.
 
 To run the relayer, run the following command:
 
-```bash
+```sh filename="vvv" copy
 ~/.webb/webb-relayer -vvv
 ```
 
@@ -131,7 +131,7 @@ To run the relayer, run the following command:
 
 You should see the following output:
 
-```rust
+```rust filename="output"
  2023-03-14T14:13:08.315804Z DEBUG webb_relayer_config::cli: Getting default dirs for webb relayer
     at crates/relayer-config/src/cli.rs:61
 
@@ -177,14 +177,14 @@ To verify that the relayer is running, you can use the `/api/v1/ip` endpoint:
 <Tabs items={["Local", "Server"]} storageKey="selected-binary">
   <Tab>
 
-    ```bash
+    ```sh filename="local" copy
     curl http://localhost:9955/api/v1/ip
     ```
 
   </Tab>
   <Tab>
 
-    ```bash
+    ```sh filename="server" copy
     curl http://<your-server-ip>:9955/api/v1/ip
     ```
 
@@ -193,7 +193,7 @@ To verify that the relayer is running, you can use the `/api/v1/ip` endpoint:
 
 You should see the following output:
 
-```json
+```json filename="public-ip" copy
 {"ip":"<your-public-ip>"}
 ```