update #197

ghost · 2015-08-02T16:12:25Z

No description provided.

switch base

enable deinterlace and ion_dev

lkl: Fix ipv6 netperf failure

commit d855086 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d855086 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

BugLink: http://bugs.launchpad.net/bugs/1702515 commit d855086 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

[ Upstream commit d855086 ] When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

BugLink: http://bugs.launchpad.net/bugs/1702863 commit d855086 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>

commit d855086 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

…-fixes WARNING: 'implemntation' may be misspelled - perhaps 'implementation'? torvalds#8: rb_leftmost was wired deeper into the implemntation, but there were some ERROR: Macros with complex values should be enclosed in parentheses torvalds#180: FILE: include/linux/rbtree.h:130: +#define RB_ROOT_CACHED (struct rb_root_cached) { {NULL, }, NULL } ERROR: Macros with complex values should be enclosed in parentheses torvalds#183: FILE: include/linux/rbtree.h:133: +#define rb_first_cached(root) (root)->rb_leftmost ERROR: code indent should use tabs where possible torvalds#197: FILE: include/linux/rbtree.h:147: + if (root->rb_leftmost == node)$ WARNING: please, no spaces at the start of a line torvalds#197: FILE: include/linux/rbtree.h:147: + if (root->rb_leftmost == node)$ ERROR: code indent should use tabs where possible torvalds#198: FILE: include/linux/rbtree.h:148: + root->rb_leftmost = rb_next(node);$ WARNING: please, no spaces at the start of a line torvalds#198: FILE: include/linux/rbtree.h:148: + root->rb_leftmost = rb_next(node);$ total: 4 errors, 3 warnings, 246 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/rbtree-avoid-generating-code-twice-for-the-cached-versions.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

commit d855086 upstream. When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty torvalds#197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Once kobject_init_and_add() failed, pci_slot_release() is called to delete slot->list from parent->slots. But slot->list is intialized afterwards, so we ran into the following crash: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... CPU: 10 PID: 1 Comm: swapper/0 Not tainted 4.4.240 torvalds#197 task: ffffeb398a45ef10 task.stack: ffffeb398a470000 PC is at __list_del_entry_valid+0x5c/0xb0 LR is at pci_slot_release+0x84/0xe4 ... __list_del_entry_valid+0x5c/0xb0 pci_slot_release+0x84/0xe4 kobject_put+0x184/0x1c4 pci_create_slot+0x17c/0x1b4 __pci_hp_initialize+0x68/0xa4 pciehp_probe+0x1a4/0x2fc pcie_port_probe_service+0x58/0x84 driver_probe_device+0x320/0x470 __driver_attach+0x54/0xb8 bus_for_each_dev+0xc8/0xf0 driver_attach+0x30/0x3c bus_add_driver+0x1b0/0x24c driver_register+0x9c/0xe0 pcie_port_service_register+0x64/0x7c pcied_init+0x44/0xa4 do_one_initcall+0x1d0/0x1f0 kernel_init_freeable+0x24c/0x254 kernel_init+0x18/0xe8 ret_from_fork+0x10/0x20 Fixes: 8a94644 ("PCI: Fix pci_create_slot() reference count leak") Signed-off-by: Jubin Zhong <zhongjubin@huawei.com> Cc: stable@vger.kernel.org #v4.4.235 ---- v2: Since both slot memory and slot->list would be handled by pci_slot_release(), we need to make sure slot->list is properly initialized beforehand. v1: https://lore.kernel.org/lkml/1606288971-47927-1-git-send-email-zhongjubin@huawei.com/ Two things need to be cleaned up on pci_create_slot's error path: 1. free slot memory 2. remove slot->list from its parent->slots This patch mistakenly took slot memory as unfreed (which is not), and would introduce double free problem.

If kobject_init_and_add() fails, pci_slot_release() is called to delete slot->list from parent->slots. But slot->list hasn't been initialized yet, so we dereference a NULL pointer: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... CPU: 10 PID: 1 Comm: swapper/0 Not tainted 4.4.240 torvalds#197 task: ffffeb398a45ef10 task.stack: ffffeb398a470000 PC is at __list_del_entry_valid+0x5c/0xb0 LR is at pci_slot_release+0x84/0xe4 ... __list_del_entry_valid+0x5c/0xb0 pci_slot_release+0x84/0xe4 kobject_put+0x184/0x1c4 pci_create_slot+0x17c/0x1b4 __pci_hp_initialize+0x68/0xa4 pciehp_probe+0x1a4/0x2fc pcie_port_probe_service+0x58/0x84 driver_probe_device+0x320/0x470 Initialize slot->list before calling kobject_init_and_add() to avoid this. Fixes: 8a94644 ("PCI: Fix pci_create_slot() reference count leak") Link: https://lore.kernel.org/r/1606876422-117457-1-git-send-email-zhongjubin@huawei.com Signed-off-by: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.9+

commit 4684709 upstream. If kobject_init_and_add() fails, pci_slot_release() is called to delete slot->list from parent->slots. But slot->list hasn't been initialized yet, so we dereference a NULL pointer: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... CPU: 10 PID: 1 Comm: swapper/0 Not tainted 4.4.240 torvalds#197 task: ffffeb398a45ef10 task.stack: ffffeb398a470000 PC is at __list_del_entry_valid+0x5c/0xb0 LR is at pci_slot_release+0x84/0xe4 ... __list_del_entry_valid+0x5c/0xb0 pci_slot_release+0x84/0xe4 kobject_put+0x184/0x1c4 pci_create_slot+0x17c/0x1b4 __pci_hp_initialize+0x68/0xa4 pciehp_probe+0x1a4/0x2fc pcie_port_probe_service+0x58/0x84 driver_probe_device+0x320/0x470 Initialize slot->list before calling kobject_init_and_add() to avoid this. Fixes: 8a94644 ("PCI: Fix pci_create_slot() reference count leak") Link: https://lore.kernel.org/r/1606876422-117457-1-git-send-email-zhongjubin@huawei.com Signed-off-by: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b98535d ] We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty torvalds#197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4684709 upstream. If kobject_init_and_add() fails, pci_slot_release() is called to delete slot->list from parent->slots. But slot->list hasn't been initialized yet, so we dereference a NULL pointer: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... CPU: 10 PID: 1 Comm: swapper/0 Not tainted 4.4.240 torvalds#197 task: ffffeb398a45ef10 task.stack: ffffeb398a470000 PC is at __list_del_entry_valid+0x5c/0xb0 LR is at pci_slot_release+0x84/0xe4 ... __list_del_entry_valid+0x5c/0xb0 pci_slot_release+0x84/0xe4 kobject_put+0x184/0x1c4 pci_create_slot+0x17c/0x1b4 __pci_hp_initialize+0x68/0xa4 pciehp_probe+0x1a4/0x2fc pcie_port_probe_service+0x58/0x84 driver_probe_device+0x320/0x470 Initialize slot->list before calling kobject_init_and_add() to avoid this. Fixes: 8a94644 ("PCI: Fix pci_create_slot() reference count leak") Link: https://lore.kernel.org/r/1606876422-117457-1-git-send-email-zhongjubin@huawei.com Signed-off-by: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix invalid access to pgdat during hot-remove operation: ndctl users reported a GPF when trying to destroy a namespace: $ ndctl destroy-namespace all -r all -f Segmentation fault dmesg: Oops: general protection fault, probably for non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: probably user-memory-access in range [0x000000000002b280-0x000000000002b287] CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1 Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS 2.20.1 09/13/2023 RIP: 0010:mod_node_page_state+0x2a/0x110 cxl-test users report a GPF when trying to unload the test module: $ modrpobe -r cxl-test dmesg BUG: unable to handle page fault for address: 0000000000004200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 torvalds#197 Tainted: [O]=OOT_MODULE, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15 RIP: 0010:mod_node_page_state+0x6/0x90 Currently, when memory is hot-plugged or hot-removed the accounting is done based on the assumption that memmap is allocated from the same node as the hot-plugged/hot-removed memory, which is not always the case. In addition, there are challenges with keeping the node id of the memory that is being remove to the time when memmap accounting is actually performed: since this is done after remove_pfn_range_from_zone(), and also after remove_memory_block_devices(). Meaning that we cannot use pgdat nor walking though memblocks to get the nid. Given all of that, account the memmap overhead system wide instead. For this we are going to be using global atomic counters, but given that memmap size is rarely modified, and normally is only modified either during early boot when there is only one CPU, or under a hotplug global mutex lock, therefore there is no need for per-cpu optimizations. Also, while we are here rename nr_memmap to nr_memmap_pages, and nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the units are in page count. Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com Fixes: 15995a3 ("mm: report per-page metadata information") Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com Reported-by: Alison Schofield <alison.schofield@intel.com> Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Fan Ni <fan.ni@samsung.com> Cc: Joel Granados <j.granados@samsung.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Li Zhijian <lizhijian@fujitsu.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix invalid access to pgdat during hot-remove operation: ndctl users reported a GPF when trying to destroy a namespace: $ ndctl destroy-namespace all -r all -f Segmentation fault dmesg: Oops: general protection fault, probably for non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: probably user-memory-access in range [0x000000000002b280-0x000000000002b287] CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1 Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS 2.20.1 09/13/2023 RIP: 0010:mod_node_page_state+0x2a/0x110 cxl-test users report a GPF when trying to unload the test module: $ modrpobe -r cxl-test dmesg BUG: unable to handle page fault for address: 0000000000004200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 torvalds#197 Tainted: [O]=OOT_MODULE, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15 RIP: 0010:mod_node_page_state+0x6/0x90 Currently, when memory is hot-plugged or hot-removed the accounting is done based on the assumption that memmap is allocated from the same node as the hot-plugged/hot-removed memory, which is not always the case. In addition, there are challenges with keeping the node id of the memory that is being remove to the time when memmap accounting is actually performed: since this is done after remove_pfn_range_from_zone(), and also after remove_memory_block_devices(). Meaning that we cannot use pgdat nor walking though memblocks to get the nid. Given all of that, account the memmap overhead system wide instead. For this we are going to be using global atomic counters, but given that memmap size is rarely modified, and normally is only modified either during early boot when there is only one CPU, or under a hotplug global mutex lock, therefore there is no need for per-cpu optimizations. Also, while we are here rename nr_memmap to nr_memmap_pages, and nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the units are in page count. Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com Fixes: 15995a3 ("mm: report per-page metadata information") Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com Reported-by: Alison Schofield <alison.schofield@intel.com> Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Fan Ni <fan.ni@samsung.com> Cc: Joel Granados <j.granados@samsung.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Li Zhijian <lizhijian@fujitsu.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix invalid access to pgdat during hot-remove operation: ndctl users reported a GPF when trying to destroy a namespace: $ ndctl destroy-namespace all -r all -f Segmentation fault dmesg: Oops: general protection fault, probably for non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: probably user-memory-access in range [0x000000000002b280-0x000000000002b287] CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1 Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS 2.20.1 09/13/2023 RIP: 0010:mod_node_page_state+0x2a/0x110 cxl-test users report a GPF when trying to unload the test module: $ modrpobe -r cxl-test dmesg BUG: unable to handle page fault for address: 0000000000004200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 torvalds#197 Tainted: [O]=OOT_MODULE, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15 RIP: 0010:mod_node_page_state+0x6/0x90 Currently, when memory is hot-plugged or hot-removed the accounting is done based on the assumption that memmap is allocated from the same node as the hot-plugged/hot-removed memory, which is not always the case. In addition, there are challenges with keeping the node id of the memory that is being remove to the time when memmap accounting is actually performed: since this is done after remove_pfn_range_from_zone(), and also after remove_memory_block_devices(). Meaning that we cannot use pgdat nor walking though memblocks to get the nid. Given all of that, account the memmap overhead system wide instead. For this we are going to be using global atomic counters, but given that memmap size is rarely modified, and normally is only modified either during early boot when there is only one CPU, or under a hotplug global mutex lock, therefore there is no need for per-cpu optimizations. Also, while we are here rename nr_memmap to nr_memmap_pages, and nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the units are in page count. Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com Fixes: 15995a3 ("mm: report per-page metadata information") Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com Reported-by: Alison Schofield <alison.schofield@intel.com> Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Fan Ni <fan.ni@samsung.com> Cc: Joel Granados <j.granados@samsung.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Li Zhijian <lizhijian@fujitsu.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix invalid access to pgdat during hot-remove operation: ndctl users reported a GPF when trying to destroy a namespace: $ ndctl destroy-namespace all -r all -f Segmentation fault dmesg: Oops: general protection fault, probably for non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: probably user-memory-access in range [0x000000000002b280-0x000000000002b287] CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1 Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS 2.20.1 09/13/2023 RIP: 0010:mod_node_page_state+0x2a/0x110 cxl-test users report a GPF when trying to unload the test module: $ modrpobe -r cxl-test dmesg BUG: unable to handle page fault for address: 0000000000004200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 torvalds#197 Tainted: [O]=OOT_MODULE, [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15 RIP: 0010:mod_node_page_state+0x6/0x90 Currently, when memory is hot-plugged or hot-removed the accounting is done based on the assumption that memmap is allocated from the same node as the hot-plugged/hot-removed memory, which is not always the case. In addition, there are challenges with keeping the node id of the memory that is being remove to the time when memmap accounting is actually performed: since this is done after remove_pfn_range_from_zone(), and also after remove_memory_block_devices(). Meaning that we cannot use pgdat nor walking though memblocks to get the nid. Given all of that, account the memmap overhead system wide instead. For this we are going to be using global atomic counters, but given that memmap size is rarely modified, and normally is only modified either during early boot when there is only one CPU, or under a hotplug global mutex lock, therefore there is no need for per-cpu optimizations. Also, while we are here rename nr_memmap to nr_memmap_pages, and nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the units are in page count. [pasha.tatashin@soleen.com: address a few nits from David Hildenbrand] Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com Fixes: 15995a3 ("mm: report per-page metadata information") Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com Reported-by: Alison Schofield <alison.schofield@intel.com> Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t Tested-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Fan Ni <fan.ni@samsung.com> Cc: Joel Granados <j.granados@samsung.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Li Zhijian <lizhijian@fujitsu.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The ASPEED AST27XX interrupt controller(INTC) contain second level and third level interrupt controller. INTC0: The second level INTC, which used to assert GIC(torvalds#192~torvalds#197) if interrupt in INTC1 asserted. There are 6 GIC interrupt number(torvalds#192~torvalds#197) used in one INTC0. INTC1_x: The third level INTC, which used to assert GIC(torvalds#192~torvalds#197) if interrupt in INTC1 asserted. There are 6 GIC interrupt number(torvalds#192~torvalds#197) used in one INTC0. Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>

Merge pull request #1 from torvalds/master

67944aa

switch base

ghost closed this Aug 2, 2015

apxii pushed a commit to apxii/linux that referenced this pull request Jun 11, 2016

Merge pull request torvalds#197 from mapfau/odroidc-3.10.y

7d72e44

enable deinterlace and ion_dev

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#197 from liuyuan10/ipv6

7826756

lkl: Fix ipv6 netperf failure

This pull request was closed.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

update #197

update #197

ghost commented Aug 2, 2015

update #197

update #197

Conversation

ghost commented Aug 2, 2015