[lineage-18.1] Update #48
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream.
A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.
Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.
Fix this by holding the read lock also when inserting characters from
the bulk endpoint.
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream.
A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2e717d655040d632c9015f19aa4275f8b16e7f2 upstream. RFC3530 notes that the 'dircount' field may be zero, in which case the recommendation is to ignore it, and only enforce the 'maxcount' field. In RFC5661, this recommendation to ignore a zero valued field becomes a requirement. Fixes: aee3776 ("nfsd4: fix rd_dircount enforcement") Cc: <stable@vger.kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6489f8d0e1d93a3603d8dad8125797559e4cf2a2 ] During boot time kernel configured with OF=y but USE_OF=n displays the following warnings and hangs shortly after starting userspace: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0 irq_create_mapping_affinity(, 6) called with NULL domain CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 whatawurst#30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 irq_create_mapping_affinity+0x29/0xc0 local_timer_setup+0x40/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35b ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88 error: can't map timer irq CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 whatawurst#30 Call Trace: __warn+0x69/0xc4 warn_slowpath_fmt+0x6c/0x94 local_timer_setup+0x58/0x88 time_init+0xb1/0xe8 start_kernel+0x31d/0x3f4 _startup+0x13b/0x13b ---[ end trace 1e6630e1c5eda35c ]--- Failed to request irq 0 (timer) Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and calling legacy interrupt controller init otherwise. Fixes: da844a8 ("xtensa: add device trees support") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca6e11c337daf7925ff8a2aac8e84490a8691905 ] Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/ Fixes: 46abc02 ("phylib: give mdio buses a device tree presence") Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 560ee196fe9e5037e5015e2cdb14b3aecb1cd7dc ] syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [whatawurst#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: fb0305c ("net-sched: consolidate default fifo qdisc setup") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20210930212239.3430364-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd8b1542a7ba0720c5a0a85ed414a122015228b ] The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Fixes: 863d08e ("supports eg20t ptp clock") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
… sequence [ Upstream commit 783f3db030563f7bcdfe2d26428af98ea1699a8e ] Any pending interrupt can prevent entering standby based power off state. To avoid it, disable the GIC CPU interface. Fixes: 8148d21 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7707a4d01a648e4c655101a469c956cb11273655 ] While existing code is correct, KCSAN is reporting a data-race in netlink_insert / netlink_sendmsg [1] It is correct to read nlk->bound without a lock, as netlink_autobind() will acquire all needed locks. [1] BUG: KCSAN: data-race in netlink_insert / netlink_sendmsg write to 0xffff8881031c8b30 of 1 bytes by task 18752 on cpu 0: netlink_insert+0x5cc/0x7f0 net/netlink/af_netlink.c:597 netlink_autobind+0xa9/0x150 net/netlink/af_netlink.c:842 netlink_sendmsg+0x479/0x7c0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2475 __do_sys_sendmsg net/socket.c:2484 [inline] __se_sys_sendmsg net/socket.c:2482 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881031c8b30 of 1 bytes by task 18751 on cpu 1: netlink_sendmsg+0x270/0x7c0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] __sys_sendto+0x2a8/0x370 net/socket.c:2019 __do_sys_sendto net/socket.c:2031 [inline] __se_sys_sendto net/socket.c:2027 [inline] __x64_sys_sendto+0x74/0x90 net/socket.c:2027 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 18751 Comm: syz-executor.0 Not tainted 5.14.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: da314c9 ("netlink: Replace rhash_portid with bound") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857b6c6f665cca9828396d9743faf37fd09e9ac3 ] The loop in i40e_get_capabilities can never end. The problem is that although i40e_aq_discover_capabilities returns with an error if there's a firmware problem, the returned error is not checked. There is a check for pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most firmware problems. When i40e_aq_discover_capabilities encounters a firmware problem, it will encounter the same problem on its next invocation. As the result, the loop becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking at the code, it can happen with a range of other firmware errors. I don't know what the correct behavior should be: whether the firmware should be retried a few times, or whether pf->hw.aq.asq_last_status should be always set to the encountered firmware error (but then it would be pointless and can be just replaced by the i40e_aq_discover_capabilities return value). However, the current behavior with an endless loop under the rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we explained the bug to them 7 months ago. This may not be the best possible fix but it's better than hanging the whole system on a firmware bug. Fixes: 56a62fc ("i40e: init code and hardware support") Tested-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1783985 upstream. Doing a "get_user_pages()" on a copy-on-write page for reading can be ambiguous: the page can be COW'ed at any time afterwards, and the direction of a COW event isn't defined. Yes, whoever writes to it will generally do the COW, but if the thread that did the get_user_pages() unmapped the page before the write (and that could happen due to memory pressure in addition to any outright action), the writer could also just take over the old page instead. End result: the get_user_pages() call might result in a page pointer that is no longer associated with the original VM, and is associated with - and controlled by - another VM having taken it over instead. So when doing a get_user_pages() on a COW mapping, the only really safe thing to do would be to break the COW when getting the page, even when only getting it for reading. At the same time, some users simply don't even care. For example, the perf code wants to look up the page not because it cares about the page, but because the code simply wants to look up the physical address of the access for informational purposes, and doesn't really care about races when a page might be unmapped and remapped elsewhere. This adds logic to force a COW event by setting FOLL_WRITE on any copy-on-write mapping when FOLL_GET (or FOLL_PIN) is used to get a page pointer as a result. The current semantics end up being: - __get_user_pages_fast(): no change. If you don't ask for a write, you won't break COW. You'd better know what you're doing. - get_user_pages_fast(): the fast-case "look it up in the page tables without anything getting mmap_sem" now refuses to follow a read-only page, since it might need COW breaking. Which happens in the slow path - the fast path doesn't know if the memory might be COW or not. - get_user_pages() (including the slow-path fallback for gup_fast()): for a COW mapping, turn on FOLL_WRITE for FOLL_GET/FOLL_PIN, with very similar semantics to FOLL_FORCE. If it turns out that we want finer granularity (ie "only break COW when it might actually matter" - things like the zero page are special and don't need to be broken) we might need to push these semantics deeper into the lookup fault path. So if people care enough, it's possible that we might end up adding a new internal FOLL_BREAK_COW flag to go with the internal FOLL_COW flag we already have for tracking "I had a COW". Alternatively, if it turns out that different callers might want to explicitly control the forced COW break behavior, we might even want to make such a flag visible to the users of get_user_pages() instead of using the above default semantics. But for now, this is mostly commentary on the issue (this commit message being a lot bigger than the patch, and that patch in turn is almost all comments), with that minimal "enable COW breaking early" logic using the existing FOLL_WRITE behavior. [ It might be worth noting that we've always had this ambiguity, and it could arguably be seen as a user-space issue. You only get private COW mappings that could break either way in situations where user space is doing cooperative things (ie fork() before an execve() etc), but it _is_ surprising and very subtle, and fork() is supposed to give you independent address spaces. So let's treat this as a kernel issue and make the semantics of get_user_pages() easier to understand. Note that obviously a true shared mapping will still get a page that can change under us, so this does _not_ mean that get_user_pages() somehow returns any "stable" page ] [surenb: backport notes Since gup_pgd_range does not exist, made appropriate changes on the the gup_huge_pgd, gup_huge_pd and gup_pud_range calls instead. Replaced (gup_flags | FOLL_WRITE) with write=1 in gup_huge_pgd, gup_huge_pd and gup_pud_range. Removed FOLL_PIN usage in should_force_cow_break since it's missing in the earlier kernels.] Reported-by: Jann Horn <jannh@google.com> Tested-by: Christoph Hellwig <hch@lst.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Kirill Shutemov <kirill@shutemov.name> Acked-by: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [surenb: backport to 4.4 kernel] Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38e0885 upstream. The NUMA balancing logic uses an arch-specific PROT_NONE page table flag defined by pte_protnone() or pmd_protnone() to mark PTEs or huge page PMDs respectively as requiring balancing upon a subsequent page fault. User-defined PROT_NONE memory regions which also have this flag set will not normally invoke the NUMA balancing code as do_page_fault() will send a segfault to the process before handle_mm_fault() is even called. However if access_remote_vm() is invoked to access a PROT_NONE region of memory, handle_mm_fault() is called via faultin_page() and __get_user_pages() without any access checks being performed, meaning the NUMA balancing logic is incorrectly invoked on a non-NUMA memory region. A simple means of triggering this problem is to access PROT_NONE mmap'd memory using /proc/self/mem which reliably results in the NUMA handling functions being invoked when CONFIG_NUMA_BALANCING is set. This issue was reported in bugzilla (issue 99101) which includes some simple repro code. There are BUG_ON() checks in do_numa_page() and do_huge_pmd_numa_page() added at commit c0e7cad to avoid accidentally provoking strange behaviour by attempting to apply NUMA balancing to pages that are in fact PROT_NONE. The BUG_ON()'s are consistently triggered by the repro. This patch moves the PROT_NONE check into mm/memory.c rather than invoking BUG_ON() as faulting in these pages via faultin_page() is a valid reason for reaching the NUMA check with the PROT_NONE page table flag set and is therefore not always a bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99101 Reported-by: Trevor Saunders <tbsaunde@tbsaunde.org> Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> [cascardo: context adjustments were necessary] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 67fd71ba16a37c663d139f5ba5296f344d80d072 ] Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong. Below is a report descriptor. 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x06, /* Usage (Keyboard), */ 0xA1, 0x01, /* Collection (Application), */ 0x85, 0x01, /* Report ID (1), */ 0x05, 0x07, /* Usage Page (Keyboard), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 0x75, 0x01, /* Report Size (1), */ 0x95, 0x08, /* Report Count (8), */ 0x81, 0x02, /* Input (Variable), */ 0x95, 0x05, /* Report Count (5), */ 0x75, 0x01, /* Report Size (1), */ 0x05, 0x08, /* Usage Page (LED), */ 0x19, 0x01, /* Usage Minimum (01h), */ 0x29, 0x05, /* Usage Maximum (05h), */ 0x91, 0x02, /* Output (Variable), */ 0x95, 0x01, /* Report Count (1), */ 0x75, 0x03, /* Report Size (3), */ 0x91, 0x03, /* Output (Constant, Variable), */ 0x95, 0x08, /* Report Count (8), */ 0x75, 0x01, /* Report Size (1), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ here is a report descriptor which is parsed one in kernel. see sys/kernel/debug/hid/<dev>/rdesc 05 01 09 06 a1 01 85 01 05 07 15 00 25 01 19 e0 29 e7 75 01 95 08 81 02 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 08 75 01 15 00 25 01 06 00 ff 09 03 81 03 95 06 75 08 15 00 25 [65] 05 07 19 00 29 [65] 81 00 95 01 75 01 15 00 25 01 05 0c 09 b8 81 02 95 01 75 01 06 01 ff 09 03 81 02 95 01 75 06 81 03 06 02 ff 09 55 85 55 15 00 26 ff 00 75 08 95 40 b1 a2 c0 06 00 ff 09 14 a1 01 85 90 05 84 75 01 95 03 15 00 25 01 09 61 05 85 09 44 09 46 81 02 95 05 81 01 75 08 95 01 15 00 26 ff 00 09 65 81 02 c0 00 Position 64(Logical Maximum) and 70(Usage Maximum) are 101. Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support. position 117 is also 101 but not related(it is Usage 65h). There are no difference of product id between JIS and ANSI. They are same 0x0267. Signed-off-by: Mizuho Mori <morimolymoly@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 ] ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is specified (`-p tcp`, for example). However, if the flag is not set, `ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which case the fragment offset is left uninitialized and a garbage value is passed to each matcher. Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6555f844549cd190eb060daef595f94d3de1582 ] WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ] Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ] There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d029a41dc986e2d5a77ecca45803857b346829 ]
perf_init_event tries multiple init callbacks and does not reset the
event state between tries. When x86_pmu_event_init runs, it
unconditionally sets the destroy callback to hw_perf_event_destroy. On
the next init attempt after x86_pmu_event_init, in perf_try_init_event,
if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy
callback will be run. However, if the next init didn't set the destroy
callback, hw_perf_event_destroy will be run (since the callback wasn't
reset).
Looking at other pmu init functions, the common pattern is to only set
the destroy callback on a successful init. Resetting the callback on
failure tries to replicate that pattern.
This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend
PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second)
run of the perf tool after a reboot results in 0 samples being
generated. The extra run of hw_perf_event_destroy results in
active_events having an extra decrement on each perf run. The second run
has active_events == 0 and every subsequent run has active_events < 0.
When active_events == 0, the NMI handler will early-out and not record
any samples.
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20211014145206.330102860@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f8763c59c4ec6254d629fe77c0a52220bd907aa upstream. John Keeping reported and posted a patch for a potential UAF in rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be called after the associated rawmidi object got already freed. After a deeper look, it turned out that the bug is rather the incorrect private_free call order for a snd_seq_device. The snd_seq_device private_free gets called at the release callback of the sequencer device object, while this was rather expected to be executed at the snd_device call chains that runs at the beginning of the whole card-free procedure. It's been broken since the rewrite of sequencer-device binding (although it hasn't surfaced because the sequencer device release happens usually right along with the card device release). This patch corrects the private_free call to be done in the right place, at snd_seq_device_dev_free(). Fixes: 7c37ae5 ("ALSA: seq: Rewrite sequencer device binding with standard bus") Reported-and-tested-by: John Keeping <john@metanate.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e0ab8e26b72a80e991c66a8abc16e6c856abe3d upstream. Fix two problems found in the strrchr() implementation for s390 architectures: evaluate empty strings (return the string address instead of NULL, if '\0' is passed as second argument); evaluate the first character of non-empty strings (the current implementation stops at the second). Fixes: 1da177e ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Heiko Carstens <hca@linux.ibm.com> (incorrect behavior with empty strings) Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream. Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host Controller. Before this patch streaming video from USB cam made mouse and keyboard connected to the same USB bus unusable. Also video was jerky. With this patch streaming video doesn't have any effect on other periferals and video is smooth. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42641042c10c757fe10cc09088cf3f436cec5007 upstream.
clang-14 complains about an unusual way of converting a pointer to
an integer:
drivers/misc/cb710/sgbuf2.c:50:15: error: performing pointer subtraction with a null pointer has undefined behavior [-Werror,-Wnull-pointer-subtraction]
return ((ptr - NULL) & 3) != 0;
Replace this with a normal cast to uintptr_t.
Fixes: 5f5bac8 ("mmc: Driver for CB710/720 memory card reader (MMC part)")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927121408.939246-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3a72ca80351917cc23f9e24c35f3c3979d3c121 upstream. Joe reports that using a statically allocated buffer for converting CPER error records into human readable text is probably a bad idea. Even though we are not aware of any actual issues, a stack buffer is clearly a better choice here anyway, so let's move the buffer into the stack frames of the two functions that refer to it. Cc: <stable@vger.kernel.org> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11c52d250b34a0862edc29db03fbec23b30db6da upstream. When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5a8a07edafed8bede17a95ef8940fe3a57a77d5 upstream. Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d388fa01fa6eb310ac023a363a6cb216d9d8fe9 upstream. If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ whatawurst#9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. Fixes: 69aba79 ("nvmem: Add a simple NVMEM framework for consumers") Cc: Douglas Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbcf40816b547b3c37af49168950491d20d81ce1 upstream. A successful 'regulator_enable()' call should be balanced by a corresponding 'regulator_disable()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: 913b864 ("iio: adc: Add TI ADC128S052") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/85189f1cfcf6f5f7b42d8730966f2a074b07b5f5.1629542160.git.christophe.jaillet@wanadoo.fr Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8167c9a375ccceed19048ad9d68cb2d02ed276e0 upstream. The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6636fec29cdf6665bd219564609e8651f6ddc142 ] On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6510e80a0b81b5d814e3aea6297ba42f5e76f73c ] The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0c5814b9933f25ecb6de169483c5b88cf632bca ]
The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .
Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b37a15188eae9d4c49c5bb035e0c8d4058e4d9b3 ] The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f13 ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d122 ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream.
Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it will cause memory
leak.
BUG: memory leak
unreferenced object 0xffff888114032e00 (size 256):
comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................
08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve.....
backtrace:
[<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline]
[<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline]
[<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline]
[<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253
[<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537
[<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
[<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
[<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
[<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
[<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
[<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
[<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
[<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
[<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
[<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
[<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969
[<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359
[<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170
[<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
BUG: memory leak
unreferenced object 0xffff888116f06900 (size 32):
comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s)
hex dump (first 32 bytes):
75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60
[<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83
[<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48
[<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289
[<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147
[<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535
[<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
[<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
[<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
[<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
[<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
[<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
[<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
[<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
[<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
[<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
[<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969
Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed65df63a39a3f6ed04f7258de8b6789e5021c18 upstream.
While writing an email explaining the "bit = 0" logic for a discussion on
making ftrace_test_recursion_trylock() disable preemption, I discovered a
path that makes the "not do the logic if bit is zero" unsafe.
The recursion logic is done in hot paths like the function tracer. Thus,
any code executed causes noticeable overhead. Thus, tricks are done to try
to limit the amount of code executed. This included the recursion testing
logic.
Having recursion testing is important, as there are many paths that can
end up in an infinite recursion cycle when tracing every function in the
kernel. Thus protection is needed to prevent that from happening.
Because it is OK to recurse due to different running context levels (e.g.
an interrupt preempts a trace, and then a trace occurs in the interrupt
handler), a set of bits are used to know which context one is in (normal,
softirq, irq and NMI). If a recursion occurs in the same level, it is
prevented*.
Then there are infrastructure levels of recursion as well. When more than
one callback is attached to the same function to trace, it calls a loop
function to iterate over all the callbacks. Both the callbacks and the
loop function have recursion protection. The callbacks use the
"ftrace_test_recursion_trylock()" which has a "function" set of context
bits to test, and the loop function calls the internal
trace_test_and_set_recursion() directly, with an "internal" set of bits.
If an architecture does not implement all the features supported by ftrace
then the callbacks are never called directly, and the loop function is
called instead, which will implement the features of ftrace.
Since both the loop function and the callbacks do recursion protection, it
was seemed unnecessary to do it in both locations. Thus, a trick was made
to have the internal set of recursion bits at a more significant bit
location than the function bits. Then, if any of the higher bits were set,
the logic of the function bits could be skipped, as any new recursion
would first have to go through the loop function.
This is true for architectures that do not support all the ftrace
features, because all functions being traced must first go through the
loop function before going to the callbacks. But this is not true for
architectures that support all the ftrace features. That's because the
loop function could be called due to two callbacks attached to the same
function, but then a recursion function inside the callback could be
called that does not share any other callback, and it will be called
directly.
i.e.
traced_function_1: [ more than one callback tracing it ]
call loop_func
loop_func:
trace_recursion set internal bit
call callback
callback:
trace_recursion [ skipped because internal bit is set, return 0 ]
call traced_function_2
traced_function_2: [ only traced by above callback ]
call callback
callback:
trace_recursion [ skipped because internal bit is set, return 0 ]
call traced_function_2
[ wash, rinse, repeat, BOOM! out of shampoo! ]
Thus, the "bit == 0 skip" trick is not safe, unless the loop function is
call for all functions.
Since we want to encourage architectures to implement all ftrace features,
having them slow down due to this extra logic may encourage the
maintainers to update to the latest ftrace features. And because this
logic is only safe for them, remove it completely.
[*] There is on layer of recursion that is allowed, and that is to allow
for the transition between interrupt context (normal -> softirq ->
irq -> NMI), because a trace may occur before the context update is
visible to the trace recursion logic.
Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Fixes: edc15ca ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d417cbe36eee7afdd85c2e871685f8dab7c2dba upstream. tglx notes: This function [futex_detect_cmpxchg] is only needed when an architecture has to runtime discover whether the CPU supports it or not. ARM has unconditional support for this, so the obvious thing to do is the below. Fixes linkage failure from Clang randconfigs: kernel/futex.o:(.text.fixup+0x5c): relocation truncated to fit: R_ARM_JUMP24 against `.init.text' and boot failures for CONFIG_THUMB2_KERNEL. Link: ClangBuiltLinux/linux#325 Comments from Nick Desaulniers: See-also: 03b8c7b ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org # v3.14+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211025190928.054676643@linuxfoundation.org Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6a0c958bdf9b2e1b57501fc9433a461f0a6aadd upstream. A kernel built with CONFIG_THUMB2_KERNEL=y and using clang as the assembler could generate non-naturally-aligned v7wbi_tlb_fns which results in a boot failure. The original commit adding the macro missed the .align directive on this data. Link: ClangBuiltLinux/linux#1447 Link: https://lore.kernel.org/all/0699da7b-354f-aecc-a62f-e25693209af4@linaro.org/ Debugged-by: Ard Biesheuvel <ardb@kernel.org> Debugged-by: Nathan Chancellor <nathan@kernel.org> Debugged-by: Richard Henderson <richard.henderson@linaro.org> Fixes: 66a625a ("ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros") Suggested-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaf6cc7165c9c5aa3c2f9faa03a98598123d0afb upstream.
Both the decompressor code and the kasan logic try to override
the memcpy() and memmove() definitions, which leading to a clash
in a KASAN-enabled kernel with XZ decompression:
arch/arm/boot/compressed/decompress.c:50:9: error: 'memmove' macro redefined [-Werror,-Wmacro-redefined]
#define memmove memmove
^
arch/arm/include/asm/string.h:59:9: note: previous definition is here
#define memmove(dst, src, len) __memmove(dst, src, len)
^
arch/arm/boot/compressed/decompress.c:51:9: error: 'memcpy' macro redefined [-Werror,-Wmacro-redefined]
#define memcpy memcpy
^
arch/arm/include/asm/string.h:58:9: note: previous definition is here
#define memcpy(dst, src, len) __memcpy(dst, src, len)
^
Here we want the set of functions from the decompressor, so undefine
the other macros before the override.
Link: https://lore.kernel.org/linux-arm-kernel/CACRpkdZYJogU_SN3H9oeVq=zJkRgRT1gDz3xp59gdqWXxw-B=w@mail.gmail.com/
Link: https://lore.kernel.org/lkml/202105091112.F5rmd4By-lkp@intel.com/
Fixes: d6d51a9 ("ARM: 9014/2: Replace string mem* functions for KASan")
Fixes: a7f464f ("ARM: 7001/2: Wire up support for the XZ decompressor")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f323127cab086e4fd618981b1e5edc396eaf0f4 upstream. With extra warnings enabled, gcc complains about this function definition: arch/arm/probes/kprobes/core.c: In function 'arch_init_kprobes': arch/arm/probes/kprobes/core.c:465:12: warning: old-style function definition [-Wold-style-definition] 465 | int __init arch_init_kprobes() Link: https://lore.kernel.org/all/20201027093057.c685a14b386acacb3c449e3d@kernel.org/ Fixes: 24ba613 ("ARM kprobes: core code") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 091bb54 upstream. This option is not supported by lld: ld.lld: error: unknown argument: -p This has been a no-op in binutils since 2004 (see commit dea514f51da1 in that tree). Given that the lowest officially supported of binutils for the kernel is 2.20, which was released in 2009, nobody needs this flag around so just remove it. Commit 1a381d4 ("arm64: remove no-op -p linker flag") did the same for arm64. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 397430b50a363d8b7bdda00522123f82df6adc5e upstream. maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f7c88691191e6c52ef2543d6f1da8d360b27a24 upstream.
Return error code if usb_maxpacket() returns 0 in usbnet_probe()
Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0023bb9dd9bc439d44604eeec62426a990054cd upstream. mv_init_host() propagates the value returned by mv_chip_id() which in turn gets propagated by mv_pci_init_one() and hits local_pci_probe(). During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Since this is a bug rather than a recoverable runtime error we should use dev_alert() instead of dev_err(). Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2195f2062e4cc93870da8e71c318ef98a1c51cef upstream. During probing, the driver tries to get a list (mask) of supported command types in port100_get_command_type_mask() function. The value is u64 and 0 is treated as invalid mask (no commands supported). The function however returns also -ERRNO as u64 which will be interpret as valid command mask. Return 0 on every error case of port100_get_command_type_mask(), so the probing will stop. Cc: <stable@vger.kernel.org> Fixes: 0347a6a ("NFC: port100: Commands mechanism implementation") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10eff1f5788b6ffac212c254e2f3666219576889 upstream. This reverts commit ab609f25d19858513919369ff3d9a63c02cd9e2e. This patch is correct in the sense that we _should_ call device_put() in case of device_register() failure, but the problem in this code is more vast. We need to set bus->state to UNMDIOBUS_REGISTERED before calling device_register() to correctly release the device in mdiobus_free(). This patch prevents us from doing it, since in case of device_register() failure put_device() will be called 2 times and it will cause UAF or something else. Also, Reported-by: tag in revered commit was wrong, since syzbot reported different leak in same function. Link: https://lore.kernel.org/netdev/20210928092657.GI2048@kadam/ Acked-by: Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/f12fb1faa4eccf0f355788225335eb4309ff2599.1633024062.git.paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c8171929116cc23f74743d99251eedadf62341a upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 88095e7 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 697542bceae51f7620af333b065dd09d213629fb upstream. Even though there are candiates value if can't find best value, it's returned -EIO. It's not proper behavior. If there is not best value, use a first candiate value to work eMMC. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Cc: stable@vger.kernel.org Fixes: c537a1c ("mmc: dw_mmc: exynos: add variable delay tuning sequence") Link: https://lore.kernel.org/r/20211022082106.1557-1-jh80.chung@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4217d07b9fb328751f877d3bd9550122014860a2 upstream. On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V), which is being treated as an invalid value by sdhci_set_power_noreg(). And thus eMMC is totally broken on the platform. [ 1.436599] ------------[ cut here ]------------ [ 1.436606] mmc0: Invalid vdd 0x17 [ 1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4 [ 1.436655] Modules linked in: [ 1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G W 5.15.0-rc1+ #137 [ 1.436669] Hardware name: Thundercomm TurboX CM2290 (DT) [ 1.436674] Workqueue: events_unbound async_run_entry_fn [ 1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436703] sp : ffff800010803a60 [ 1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70 [ 1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280 [ 1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000 [ 1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020 [ 1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff [ 1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc [ 1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60 [ 1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159 [ 1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80 [ 1.436797] Call trace: [ 1.436800] sdhci_set_power_noreg+0x168/0x2b4 [ 1.436805] sdhci_set_ios+0xa0/0x7fc [ 1.436811] mmc_power_up.part.0+0xc4/0x164 [ 1.436818] mmc_start_host+0xa0/0xb0 [ 1.436824] mmc_add_host+0x60/0x90 [ 1.436830] __sdhci_add_host+0x174/0x330 [ 1.436836] sdhci_msm_probe+0x7c0/0x920 [ 1.436842] platform_probe+0x68/0xe0 [ 1.436850] really_probe.part.0+0x9c/0x31c [ 1.436857] __driver_probe_device+0x98/0x144 [ 1.436863] driver_probe_device+0xc8/0x15c [ 1.436869] __device_attach_driver+0xb4/0x120 [ 1.436875] bus_for_each_drv+0x78/0xd0 [ 1.436881] __device_attach_async_helper+0xac/0xd0 [ 1.436888] async_run_entry_fn+0x34/0x110 [ 1.436895] process_one_work+0x1d0/0x354 [ 1.436903] worker_thread+0x13c/0x470 [ 1.436910] kthread+0x150/0x160 [ 1.436915] ret_from_fork+0x10/0x20 [ 1.436923] ---[ end trace fcfac44cb045c3a8 ]--- Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to SDHCI_POWER_330 as well. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211004024935.15326-1-shawn.guo@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db6c3c064f5d55fa9969f33eafca3cdbefbb3541 upstream. Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55e6d8037805b3400096d621091dfbf713f97e83 upstream. In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 3f4ff56 ("regmap: rbtree: Make cache_present bitmap per node") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211012023735.1632786-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a089e95b4d6bb625044d47aed0c442a8f7bd093 upstream. nios2:allmodconfig builds fail with make[1]: *** No rule to make target 'arch/nios2/boot/dts/""', needed by 'arch/nios2/boot/dts/built-in.a'. Stop. make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored) This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL, which in turn enables NIOS2_DTB_SOURCE. This causes the build error because the default value for NIOS2_DTB_SOURCE is an empty string. Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error. Fixes: 2fc8483 ("nios2: Build infrastructure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f7019c7eb33967eb87766e0e4602b5576873680 ] Currently Linux SCTP uses the verification tag of the existing SCTP asoc when failing to process and sending the packet with the ABORT chunk. This will result in the peer accepting the ABORT chunk and removing the SCTP asoc. One could exploit this to terminate a SCTP asoc. This patch is to fix it by always using the initiate tag of the received INIT chunk for the ABORT chunk to be sent. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa0f697e45286a6b5f0ceca9418acf54b9099d99 ] sctp_sf_violation() is called when processing HEARTBEAT_ACK chunk in cookie_wait state, and some other places are also using it. The vtag in the chunk's sctphdr should be verified, otherwise, as later in chunk length check, it may send abort with the existent asoc's vtag, which can be exploited by one to cook a malicious chunk to terminate a SCTP asoc. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/20211101082440.664392327@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.4.289: (19 commits)
USB: cdc-acm: fix racy tty buffer accesses
USB: cdc-acm: fix break reporting
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
phy: mdio: fix memory leak
net_sched: fix NULL deref in fifo_set_limit()
ptp_pch: Load module automatically if ID matches
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
netlink: annotate data races around nlk->bound
i40e: fix endless loop under rtnl
gup: document and work around "COW can break either way" issue
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
netfilter: ip6_tables: zero-initialize fragment offset
mac80211: Drop frames from invalid MAC address in ad-hoc mode
scsi: ses: Fix unsigned comparison with less than zero
scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
perf/x86: Reset destroy callback on event init failure
Linux 4.4.289
Changes in 4.4.289: (44 commits)
ALSA: seq: Fix a potential UAF by wrong private_free call order
s390: fix strrchr() implementation
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
cb710: avoid NULL pointer subtraction
efi/cper: use stack buffer for error record decoding
Input: xpad - add support for another USB ID of Nacon GC-100
USB: serial: qcserial: add EM9191 QDL support
USB: serial: option: add Telit LE910Cx composition 0x1204
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
net: arc: select CRC32
net: korina: select CRC32
net: encx24j600: check error in devm_regmap_init_encx24j600
ethernet: s2io: fix setting mac address during resume
nfc: fix error handling of nfc_proto_register()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
pata_legacy: fix a couple uninitialized variable bugs
drm/msm: Fix null pointer dereference on pointer edp
r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256
NFSD: Keep existing listeners on portlist error
netfilter: ipvs: make global sysctl readonly in non-init netns
NIOS2: irqflags: rename a redefined register name
can: rcar_can: fix suspend/resume
can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification
can: peak_pci: peak_pci_remove(): fix UAF
ocfs2: mount fails with buffer overflow in strlen
elfcore: correct reference to CONFIG_UML
ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
ASoC: DAPM: Fix missing kctl change notifications
ovl: fix missing negative dentry check in ovl_rename()
nfc: nci: fix the UAF of rf_conn_info object
isdn: cpai: check ctr->cnr to avoid array index out of bound
netfilter: Kconfig: use 'default y' instead of 'm' for bool config option
ARM: dts: spear3xx: Fix gmac node
isdn: mISDN: Fix sleeping function called from invalid context
platform/x86: intel_scu_ipc: Update timeout value in comment
ALSA: hda: avoid write to STATESTS if controller is in reset
net: mdiobus: Fix memory leak in __mdiobus_register
tracing: Have all levels of checks prevent recursion
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
Linux 4.4.290
Changes in 4.4.291: (18 commits)
ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
ARM: 9134/1: remove duplicate memcpy() definition
ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
ARM: 8819/1: Remove '-p' from LDFLAGS
usbnet: sanity check for maxpacket
usbnet: fix error return code in usbnet_probe()
ata: sata_mv: Fix the error handling of mv_chip_id()
nfc: port100: fix using -ERRNO as command type mask
Revert "net: mdiobus: Fix memory leak in __mdiobus_register"
mmc: vub300: fix control-message timeouts
mmc: dw_mmc: exynos: fix the finding clock sample value
mmc: sdhci: Map more voltage level to SDHCI_POWER_330
net: lan78xx: fix division by zero in send path
regmap: Fix possible double-free in regcache_rbtree_exit()
nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST
sctp: use init_tag from inithdr for ABORT chunk
sctp: add vtag check in sctp_sf_violation
Linux 4.4.291
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.