Upstreaming max597x #3

sylv-io · 2022-01-06T16:41:23Z

No description provided.

ASPEED device tree updates for 5.15 - New machines: * TYAN S7106 BMC, a x86 server from about four years ago - Descriptions for the AST2600 ADC, which now has an upstream driver - Lots of GPIO line names. The OpenBMC project has adopted a scheme for naming the lines, and new additions will follow this guide - New I2C devices for Rainier, Everest, EthanolX, Mt Jade - Fixes for fp5280g2 which has seen some recent development, including the addtion of a QEmu machine for testing

ASPEED defconfig updates for 5.16 - Add options that are enabled in the common OpenBMC kernel - Re-enable DRM_FBDEV_EMULATION - Turn on the various sensor drivers that are used in BMC systems, so we can boot test where they are modelled in Qemu

FSI changes for v5.16 - SBEFIFO usersapce interfaces to perform FFDC (First Failure Data Capture) and detect timeouts - A fix to handle multiple messages in flight

ASPEED device tree updates for 5.16, round 2 - New machines: * Inventec Transformers, an x86 family server with an AST2600 BMC - Updates to the Everest and Rainier sensors, gpios and KCS devices - New UART routing device tree description

For Aspeed, HCHalted status depends on not only Run/Stop but also ASS/PSS status. Handshake CMD_RUN on startup instead. OpenBMC-Staging-Count: 2 Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Fixes: 280a904 ("ehci: fix EHCI host controller initialization sequence") Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>

Add support for the manufacturer ID to the debugfs entries. OpenBMC-Staging-Count: 2 Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20211004144339.2634330-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>

There are multiple power supplies that will indicate CFFPS_CCIN_VERSION_1, use the manufacturer ID to determine if it should be treated as version cffps1 or version cffps2. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20211004144339.2634330-2-bjwyman@gmail.com [groeck: Fixed continuation line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831071458.2334-3-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

This patch completes the declare of ADC register bitfields and uses the same prefix ASPEED_ADC_* for these bitfields. In addition, tidy up space alignment of the codes. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210831071458.2334-4-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

Keep the model data pointer to driver data for reducing the usage of of_device_get_match_data(). Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-2-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

This patch refactors the model data structure to distinguish the function form different versions of aspeed ADC. - Rename the vref_voltage to vref_fixed_mv and add vref_mv driver data When driver probe will check vref_fixed_mv value and store it to vref_mv which isn't const value. - Add num_channels Make num_channles of iio device can be changed by different model_data - Add need_prescaler flag and scaler_bit_width The need_prescaler flag is used to tell the driver the clock divider needs another Prescaler and the scaler_bit_width to set the clock divider bitfield width. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-3-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

Add the function to check the vref_fixed_mv and set the value to driver data. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-4-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

This patch uses need_prescaler and scaler_bit_width to set the ADC clock scaler. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-5-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

This patch use devm_add_action_or_reset to handle the error in probe phase. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-6-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

Make driver to support ast2600 adc device. - Use shared reset controller - Complete the vref configure function - Add the model data for ast2600 adc Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-7-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

The ADC clock formula is ast2400/2500: ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0] + 1) ast2600: ADC clock period = PCLK * 2 * (ADC0C[15:0] + 1) They all have one fixed divided 2 and the legacy driver didn't handle it. This patch register the fixed factory clock device as the parent of ADC clock scaler to fix this issue. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-8-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

Add the function to set the sampling rate and keep the sampling period for a driver used to wait the fresh value. In addition, since the ADC clock is required when initializing the ADC device, move clk_prepare_enable ahead of the initialization phase. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-9-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

This patch adds a compensation phase to improve the accuracy of ADC measurement. This is the built-in function through input half of the reference voltage to get the ADC offset. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-10-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

In ast2600, ADC integrate dividing circuit at last input channel for battery sensing. This patch use the dts property "battery-sensing" to enable this feature makes the last channel of each adc can tolerance higher voltage than reference voltage. The offset interface of ch7 will be separated when enabling the battery sensing mode. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-11-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

The ADC controller has a trimming register for fine-tune the reference voltage. The trimming value comes from the OTP register which will be written during chip production. This patch will read this OTP value and configure it to the ADC register when the ADC controller probes and using dts property "aspeed,trim-data-valid" to determine whether to execute this flow. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20210922081520.30580-12-billy_tsai@aspeedtech.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20211001120018.17570-1-colin.king@canonical.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Joel Stanley <joel@jms.id.au>

Document the bindings for the Aspeed AST25XX and AST26XX XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/1588697905-23444-2-git-send-email-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>

With the exception of the lm5066i, all the devices handled by this driver had been missing their offset ('b') coefficients for direct format readings. Cc: stable@vger.kernel.org Fixes: 58615a9 ("hwmon: (pmbus/lm25066) Add support for LM25056") Fixes: e53e649 ("hwmon: (pmbus/lm25066) Refactor device specific coefficients") Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

At least as of Revision J, the datasheet has a slightly different value than what we'd had in the driver. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-3-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reordering things to put the table before the probe function eliminates the need for it. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-4-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

…066_coeff Maintaining this manually is error prone (there are currently only five chips supported, not six); gcc can do it for us automatically. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Fixes: 666c149 ("hwmon: (pmbus/lm25066) Drop support for LM25063") Link: https://lore.kernel.org/r/20210928092242.30036-5-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

lm25066_coeff is read-only. Mark it as such. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-6-zev@bewilderbeest.net [groeck: Added description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-7-zev@bewilderbeest.net [groeck: Replaced reference to reasoning with reasoning, fixed checkpatch warnings, fixed compile warning comparing of_id->data w/ i2c_id->driver_data] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

The appropriate mantissa values for the lm25066 family's direct-format current and power readings are a function of the sense resistor employed between the SENSE and VIN pins of the chip. Instead of assuming that resistance is always the same 1mOhm as used in the datasheet, allow it to be configured via a device-tree property ("shunt-resistor-micro-ohms"). Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20210928092242.30036-8-zev@bewilderbeest.net [groeck: Fixed checkpatch warnings] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210928092242.30036-9-zev@bewilderbeest.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Joel Stanley <joel@jms.id.au>

Hou Tao says: ==================== Fix the unmatched unit_size of bpf_mem_cache From: Hou Tao <houtao1@huawei.com> Hi, The patchset aims to fix the reported warning [0] when the unit_size of bpf_mem_cache is mismatched with the object size of underly slab-cache. Patch #1 fixes the warning by adjusting size_index according to the value of KMALLOC_MIN_SIZE, so bpf_mem_cache with unit_size which is smaller than KMALLOC_MIN_SIZE or is not aligned with KMALLOC_MIN_SIZE will be redirected to bpf_mem_cache with bigger unit_size. Patch #2 doesn't do prefill for these redirected bpf_mem_cache to save memory. Patch #3 adds further error check in bpf_mem_alloc_init() to ensure the unit_size and object_size are always matched and to prevent potential issues due to the mismatch. Please see individual patches for more details. And comments are always welcome. [0]: https://lore.kernel.org/bpf/87jztjmmy4.fsf@all.your.base.are.belong.to.us ==================== Link: https://lore.kernel.org/r/20230908133923.2675053-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty torvalds#368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Syzkaller reported a sleep in atomic context bug relating to the HASHCHK handler logic: BUG: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:1518 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 25040, name: syz-executor preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 no locks held by syz-executor/25040. irq event stamp: 34 hardirqs last enabled at (33): [<c000000000048b38>] prep_irq_for_enabled_exit arch/powerpc/kernel/interrupt.c:56 [inline] hardirqs last enabled at (33): [<c000000000048b38>] interrupt_exit_user_prepare_main+0x148/0x600 arch/powerpc/kernel/interrupt.c:230 hardirqs last disabled at (34): [<c00000000003e6a4>] interrupt_enter_prepare+0x144/0x4f0 arch/powerpc/include/asm/interrupt.h:176 softirqs last enabled at (0): [<c000000000281954>] copy_process+0x16e4/0x4750 kernel/fork.c:2436 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 15 PID: 25040 Comm: syz-executor Not tainted 6.5.0-rc5-00001-g3ccdff6bb06d #3 Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1040.00 (NL1040_021) hv:phyp pSeries Call Trace: [c0000000a8247ce0] [c00000000032b0e4] __might_resched+0x3b4/0x400 kernel/sched/core.c:10189 [c0000000a8247d80] [c0000000008c7dc8] __might_fault+0xa8/0x170 mm/memory.c:5853 [c0000000a8247dc0] [c00000000004160c] do_program_check+0x32c/0xb20 arch/powerpc/kernel/traps.c:1518 [c0000000a8247e50] [c000000000009b2c] program_check_common_virt+0x3bc/0x3c0 To determine if a trap was caused by a HASHCHK instruction, we inspect the user instruction that triggered the trap. However this may sleep if the page needs to be faulted in (get_user_instr() reaches __get_user(), which calls might_fault() and triggers the bug message). Move the HASHCHK handler logic to after we allow IRQs, which is fine because we are only interested in HASHCHK if it's a user space trap. Fixes: 5bcba4e ("powerpc/dexcr: Handle hashchk exception") Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230915034604.45393-1-bgray@linux.ibm.com

Sebastian Andrzej Siewior says: ==================== net: hsr: Properly parse HSRv1 supervisor frames. this is a follow-up to https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/ replacing https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/ by grabing/ adding tags and reposting with a commit message plus a missing __packed to a struct (#2) plus extending the testsuite to sover HSRv1 which is what broke here (#3-#5). HSRv0 is (was) not affected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 torvalds#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 torvalds#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 torvalds#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 torvalds#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 torvalds#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 torvalds#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 torvalds#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 torvalds#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 torvalds#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 torvalds#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 torvalds#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 torvalds#17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c torvalds#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] torvalds#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] torvalds#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f torvalds#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 torvalds#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] torvalds#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc torvalds#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] torvalds#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] torvalds#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] torvalds#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] torvalds#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 torvalds#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] torvalds#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] torvalds#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 torvalds#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Andrii Nakryiko says: ==================== BPF control flow graph and precision backtrack fixes A small fix to BPF verifier's CFG logic around handling and reporting ldimm64 instructions. Patch #1 was previously submitted separately ([0]), and so this patch set supersedes that patch. Second patch is fixing obscure corner case in mark_chain_precise() logic. See patch for details. Patch #3 adds a dedicated test, however fragile it might. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231101205626.119243-1-andrii@kernel.org/ ==================== Link: https://lore.kernel.org/r/20231110002638.4168352-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This allows it to break the following circular locking dependency. Aug 10 07:01:29 dg1test kernel: ====================================================== Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ torvalds#10 Not tainted Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------ Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock: Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: but task is already holding lock: Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: which lock already depends on the new lock. Aug 10 07:01:29 dg1test kernel: the existing dependency chain (in reverse order) is: Aug 10 07:01:29 dg1test kernel: -> #3 (&event->list_lock#2){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: -> #2 (&device->intr.lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #1 (&event->refs_lock#4){....}-{2:2}: Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau] Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau] Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100 Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0 Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau] Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm] Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm] Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau] Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0 Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90 Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc Aug 10 07:01:29 dg1test kernel: -> #0 (&fctx->lock){-...}-{2:2}: Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: other info that might help us debug this: Aug 10 07:01:29 dg1test kernel: Chain exists of: &fctx->lock --> &device->intr.lock --> &event->list_lock#2 Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario: Aug 10 07:01:29 dg1test kernel: CPU0 CPU1 Aug 10 07:01:29 dg1test kernel: ---- ---- Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock); Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2); Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock); Aug 10 07:01:29 dg1test kernel: *** DEADLOCK *** Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236: Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: stack backtrace: Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ torvalds#10 Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 Aug 10 07:01:29 dg1test kernel: Call Trace: Aug 10 07:01:29 dg1test kernel: <TASK> Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90 Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110 Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240 Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0 Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70 Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau] Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau] Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau] Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240 Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80 Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240 Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160 Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0 Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40 Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700 Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc> Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206 Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0 Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950 Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001 Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490 Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280 Aug 10 07:01:29 dg1test kernel: </TASK> Signed-off-by: Dave Airlie <airlied@redhat.com> Tested-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com

…f-times' Eduard Zingerman says: ==================== verify callbacks as if they are called unknown number of times This series updates verifier logic for callback functions handling. Current master simulates callback body execution exactly once, which leads to verifier not detecting unsafe programs like below: static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx) { ctx->i = 0; return 0; } SEC("?raw_tp") int unsafe_on_zero_iter(void *unused) { struct num_context loop_ctx = { .i = 32 }; __u8 choice_arr[2] = { 0, 1 }; bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0); return choice_arr[loop_ctx.i]; } This was reported previously in [0]. The basic idea of the fix is to schedule callback entry state for verification in env->head until some identical, previously visited state in current DFS state traversal is found. Same logic as with open coded iterators, and builds on top recent fixes [1] for those. The series is structured as follows: - patches #1,2,3 update strobemeta, xdp_synproxy selftests and bpf_loop_bench benchmark to allow convergence of the bpf_loop callback states; - patches #4,5 just shuffle the code a bit; - patch torvalds#6 is the main part of the series; - patch torvalds#7 adds test cases for torvalds#6; - patch torvalds#8 extend patch torvalds#6 with same speculative scalar widening logic, as used for open coded iterators; - patch torvalds#9 adds test cases for torvalds#8; - patch torvalds#10 extends patch torvalds#6 to track maximal number of callback executions specifically for bpf_loop(); - patch torvalds#11 adds test cases for torvalds#10. Veristat results comparing this series to master+patches #1,2,3 using selftests show the following difference: File Program States (A) States (B) States (DIFF) ------------------------- ------------- ---------- ---------- ------------- bpf_loop_bench.bpf.o benchmark 1 2 +1 (+100.00%) pyperf600_bpf_loop.bpf.o on_event 322 407 +85 (+26.40%) strobemeta_bpf_loop.bpf.o on_event 113 151 +38 (+33.63%) xdp_synproxy_kern.bpf.o syncookie_tc 341 291 -50 (-14.66%) xdp_synproxy_kern.bpf.o syncookie_xdp 344 301 -43 (-12.50%) Veristat results comparing this series to master using Tetragon BPF files [2] also show some differences. States diff varies from +2% to +15% on 23 programs out of 186, no new failures. Changelog: - V3 [5] -> V4, changes suggested by Andrii: - validate mark_chain_precision() result in patch torvalds#10; - renaming s/cumulative_callback_depth/callback_unroll_depth/. - V2 [4] -> V3: - fixes in expected log messages for test cases: - callback_result_precise; - parent_callee_saved_reg_precise_with_callback; - parent_stack_slot_precise_with_callback; - renamings (suggested by Alexei): - s/callback_iter_depth/cumulative_callback_depth/ - s/is_callback_iter_next/calls_callback/ - s/mark_callback_iter_next/mark_calls_callback/ - prepare_func_exit() updated to exit with -EFAULT when callee->in_callback_fn is true but calls_callback() is not true for callsite; - test case 'bpf_loop_iter_limit_nested' rewritten to use return value check instead of verifier log message checks (suggested by Alexei). - V1 [3] -> V2, changes suggested by Andrii: - small changes for error handling code in __check_func_call(); - callback body processing log is now matched in relevant verifier_subprog_precision.c tests; - R1 passed to bpf_loop() is now always marked as precise; - log level 2 message for bpf_loop() iteration termination instead of iteration depth messages; - __no_msg macro removed; - bpf_loop_iter_limit_nested updated to avoid using __no_msg; - commit message for patch #3 updated according to Alexei's request. [0] https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/ [1] https://lore.kernel.org/bpf/20231024000917.12153-1-eddyz87@gmail.com/ [2] git@github.com:cilium/tetragon.git [3] https://lore.kernel.org/bpf/20231116021803.9982-1-eddyz87@gmail.com/T/#t [4] https://lore.kernel.org/bpf/20231118013355.7943-1-eddyz87@gmail.com/T/#t [5] https://lore.kernel.org/bpf/20231120225945.11741-1-eddyz87@gmail.com/T/#t ==================== Link: https://lore.kernel.org/r/20231121020701.26440-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 torvalds#6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 torvalds#7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 torvalds#8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] torvalds#9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: stable@vger.kernel.org Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b torvalds#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 torvalds#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 torvalds#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] torvalds#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] torvalds#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] torvalds#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] torvalds#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb torvalds#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 torvalds#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 torvalds#15 [ffff88aa841efb88] device_del at ffffffff82179d23 torvalds#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] torvalds#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] torvalds#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a torvalds#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff torvalds#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 torvalds#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Due to the cited patch, devlink health commands take devlink lock and this may result in deadlock for mlx5e_tx_reporter as it takes local state_lock before calling devlink health report and on the other hand devlink health commands such as diagnose for same reporter take local state_lock after taking devlink lock (see kernel log below). To fix it, remove local state_lock from mlx5e_tx_timeout_work() before calling devlink_health_report() and take care to cancel the work before any call to close channels, which may free the SQs that should be handled by the work. Before cancel_work_sync(), use current_work() to check we are not calling it from within the work, as mlx5e_tx_timeout_work() itself may close the channels and reopen as part of recovery flow. While removing state_lock from mlx5e_tx_timeout_work() keep rtnl_lock to ensure no change in netdev->real_num_tx_queues, but use rtnl_trylock() and a flag to avoid deadlock by calling cancel_work_sync() before closing the channels while holding rtnl_lock too. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Not tainted ------------------------------------------------------ kworker/u16:2/65 is trying to acquire lock: ffff888122f6c2f8 (&devlink->lock_key#2){+.+.}-{3:3}, at: devlink_health_report+0x2f1/0x7e0 but task is already holding lock: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x12c/0x14b0 mlx5e_rx_reporter_diagnose+0x71/0x700 [mlx5_core] devlink_nl_cmd_health_reporter_diagnose_doit+0x212/0xa50 genl_family_rcv_msg_doit+0x1e9/0x2f0 genl_rcv_msg+0x2e9/0x530 netlink_rcv_skb+0x11d/0x340 genl_rcv+0x24/0x40 netlink_unicast+0x438/0x710 netlink_sendmsg+0x788/0xc40 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x1c1/0x290 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#2){+.+.}-{3:3}: __lock_acquire+0x2c8a/0x6200 lock_acquire+0x1c1/0x550 __mutex_lock+0x12c/0x14b0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 worker_thread+0x59d/0xec0 kthread+0x28f/0x330 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock(&devlink->lock_key#2); lock(&priv->state_lock); lock(&devlink->lock_key#2); *** DEADLOCK *** 4 locks held by kworker/u16:2/65: #0: ffff88811a55b138 ((wq_completion)mlx5e#2){+.+.}-{0:0}, at: process_one_work+0x6e2/0x1340 #1: ffff888101de7db8 ((work_completion)(&priv->tx_timeout_work)){+.+.}-{0:0}, at: process_one_work+0x70f/0x1340 #2: ffffffff84ce8328 (rtnl_mutex){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x53/0x280 [mlx5_core] #3: ffff888121d20be0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] stack backtrace: CPU: 1 PID: 65 Comm: kworker/u16:2 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x57/0x7d check_noncircular+0x278/0x300 ? print_circular_bug+0x460/0x460 ? find_held_lock+0x2d/0x110 ? __stack_depot_save+0x24c/0x520 ? alloc_chain_hlocks+0x228/0x700 __lock_acquire+0x2c8a/0x6200 ? register_lock_class+0x1860/0x1860 ? kasan_save_stack+0x1e/0x40 ? kasan_set_free_info+0x20/0x30 ? ____kasan_slab_free+0x11d/0x1b0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? devlink_health_report+0x3d5/0x7e0 lock_acquire+0x1c1/0x550 ? devlink_health_report+0x2f1/0x7e0 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? find_held_lock+0x2d/0x110 __mutex_lock+0x12c/0x14b0 ? devlink_health_report+0x2f1/0x7e0 ? devlink_health_report+0x2f1/0x7e0 ? mutex_lock_io_nested+0x1320/0x1320 ? trace_hardirqs_on+0x2d/0x100 ? bit_wait_io_timeout+0x170/0x170 ? devlink_health_do_dump.part.0+0x171/0x3a0 ? kfree+0x1ba/0x520 ? devlink_health_do_dump.part.0+0x171/0x3a0 devlink_health_report+0x2f1/0x7e0 mlx5e_health_report+0xc9/0xd7 [mlx5_core] mlx5e_reporter_tx_timeout+0x2ab/0x3d0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5e_reporter_tx_err_cqe+0x1b0/0x1b0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x70/0x70 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x320/0x320 [mlx5_core] ? mlx5e_tx_timeout_work+0x70/0x280 [mlx5_core] ? mutex_lock_io_nested+0x1320/0x1320 ? process_one_work+0x70f/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? lock_downgrade+0x6e0/0x6e0 mlx5e_tx_timeout_work+0x1c1/0x280 [mlx5_core] process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0x230/0x230 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x59d/0xec0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Fixes: c90005b ("devlink: Hold the instance lock in health callbacks") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 torvalds#6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 torvalds#7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: <TASK> dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 </TASK> Fixes: d5e0126 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.011207] fl_delete+0x36/0x80 [cls_flower] [ 3103.011614] tc_del_tfilter+0x56f/0x750 [ 3103.011982] rtnetlink_rcv_msg+0xff/0x3a0 [ 3103.012362] ? netlink_ack+0x1c7/0x4e0 [ 3103.012719] ? rtnl_calcit.isra.44+0x130/0x130 [ 3103.013134] netlink_rcv_skb+0x54/0x100 [ 3103.013533] netlink_unicast+0x1ca/0x2b0 [ 3103.013902] netlink_sendmsg+0x361/0x4d0 [ 3103.014269] __sock_sendmsg+0x38/0x60 [ 3103.014643] ____sys_sendmsg+0x1f2/0x200 [ 3103.015018] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.015265] ___sys_sendmsg+0x87/0xd0 [ 3103.016608] ? copy_msghdr_from_user+0x72/0xa0 [ 3103.017014] ? ___sys_recvmsg+0x9b/0xd0 [ 3103.017381] ? ttwu_do_activate.isra.137+0x58/0x180 [ 3103.017821] ? wake_up_q+0x49/0x90 [ 3103.018157] ? futex_wake+0x137/0x160 [ 3103.018521] ? __sys_sendmsg+0x51/0x90 [ 3103.018882] __sys_sendmsg+0x51/0x90 [ 3103.019230] ? exit_to_user_mode_prepare+0x56/0x130 [ 3103.019670] do_syscall_64+0x3c/0x80 [ 3103.020017] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 3103.020469] RIP: 0033:0x7f4254811ef4 [ 3103.020816] Code: 89 f3 48 83 ec 10 48 89 7c 24 08 48 89 14 24 e8 42 eb ff ff 48 8b 14 24 41 89 c0 48 89 de 48 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 48 89 04 24 e8 78 eb ff ff 48 8b [ 3103.022290] RSP: 002b:00007f424cdd9480 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 3103.022970] RAX: ffffffffffffffda RBX: 00007f424cdd9510 RCX: 00007f4254811ef4 [ 3103.023564] RDX: 0000000000000000 RSI: 00007f424cdd9510 RDI: 0000000000000012 [ 3103.024158] RBP: 00007f424cdda238 R08: 0000000000000000 R09: 00007f41d801a4b0 [ 3103.024748] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001 [ 3103.025341] R13: 00007f424cdd9510 R14: 00007f424cdda240 R15: 00007f424cdd99a0 [ 3103.025931] </TASK> [ 3103.026182] ---[ end trace 0000000000000000 ]--- [ 3103.027033] ------------[ cut here ]------------ Fixes: 9be6c21 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Similar to a reported issue (check the commit b33fb5b ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value. Cc: stable@vger.kernel.org Fixes: 0626e66 ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>

Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests. MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates: [ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint #3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint torvalds#84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1 Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>

Hou Tao says: ==================== Fix the read of vsyscall page through bpf From: Hou Tao <houtao1@huawei.com> Hi, As reported by syzboot [1] and [2], when trying to read vsyscall page by using bpf_probe_read_kernel() or bpf_probe_read(), oops may happen. Thomas Gleixner had proposed a test patch [3], but it seems that no formal patch is posted after about one month [4], so I post it instead and add an Originally-by tag in patch #2. Patch #1 makes is_vsyscall_vaddr() being a common helper. Patch #2 fixes the problem by disallowing vsyscall page read for copy_from_kernel_nofault(). Patch #3 adds one test case to ensure the read of vsyscall page through bpf is rejected. Please see individual patches for more details. Comments are always welcome. [1]: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com/ [2]: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com/ [3]: https://lore.kernel.org/bpf/87r0jwquhv.ffs@tglx/ [4]: https://lore.kernel.org/bpf/e24b125c-8ff4-9031-6c53-67ff2e01f316@huaweicloud.com/ Change Log: v3: * rephrase commit message for patch #1 & #2 (Sohil) * reword comments in copy_from_kernel_nofault_allowed() (Sohil) * add Rvb tag for patch #1 and Acked-by tag for patch #3 (Sohil, Yonghong) v2: https://lore.kernel.org/bpf/20240126115423.3943360-1-houtao@huaweicloud.com/ * move is_vsyscall_vaddr to asm/vsyscall.h instead (Sohil) * elaborate on the reason for disallowing of vsyscall page read in copy_from_kernel_nofault_allowed() (Sohil) * update the commit message of patch #2 to more clearly explain how the oops occurs. (Sohil) * update the commit message of patch #3 to explain the expected return values of various bpf helpers (Yonghong) v1: https://lore.kernel.org/bpf/20240119073019.1528573-1-houtao@huaweicloud.com/ ==================== Link: https://lore.kernel.org/r/20240202103935.3154011-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.8, take #3 - Check for the validity of interrupts handled by a MOVALL command - Check for the validity of interrupts while reading the pending state on enabling LPIs.

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin. Patch #2 fixes an issue with bridge netfilter and broadcast/multicast packets. There is a day 0 bug in br_netfilter when used with connection tracking. Conntrack assumes that an nf_conn structure that is not yet added to hash table ("unconfirmed"), is only visible by the current cpu that is processing the sk_buff. For bridge this isn't true, sk_buff can get cloned in between, and clones can be processed in parallel on different cpu. This patch disables NAT and conntrack helpers for multicast packets. Patch #3 adds a selftest to cover for the br_netfilter bug. netfilter pull request 24-02-29 * tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: add bridge conntrack + multicast test case netfilter: bridge: confirm multicast packets before passing them up the stack netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate() ==================== Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Enable KCS channel #3 and #4 for AST2600 EVB. Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Change-Id: I489af6841b72d8025087adb2f5a8b98d33e33dd2 (cherry picked from commit 57995c6)

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes insufficient sanitization of netlink attributes for the inner expression which can trigger nul-pointer dereference, from Davide Ornaghi. Patch #2 address a report that there is a race condition between namespace cleanup and the garbage collection of the list:set type. This patch resolves this issue with other minor issues as well, from Jozsef Kadlecsik. Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp has been mangled, this unbreaks ip6 dscp set $v, from Florian Westphal. All of these patches address issues that are present in several releases. * tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload ==================== Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/20240609103654.914987-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Greg KH <gregkh@linuxfoundation.org> Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/ Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/ Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…play During inode logging (and log replay too), we are holding a transaction handle and we often need to call btrfs_iget(), which will read an inode from its subvolume btree if it's not loaded in memory and that results in allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode() callback - and this may recurse into the filesystem in case we are under memory pressure and attempt to commit the current transaction, resulting in a deadlock since the logging (or log replay) task is holding a transaction handle open. Syzbot reported this with the following stack traces: WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted ------------------------------------------------------ syz-executor.1/9919 is trying to acquire lock: ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 but task is already holding lock: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ei->log_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x12f/0x260 fs/read_write.c:643 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170 close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324 generic_shutdown_super+0x159/0x3d0 fs/super.c:642 kill_anon_super+0x3a/0x60 fs/super.c:1226 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super+0xde/0x100 fs/super.c:506 cleanup_mnt+0x222/0x450 fs/namespace.c:1267 task_work_run+0x14e/0x250 kernel/task_work.c:180 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218 __do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: __lock_release kernel/locking/lockdep.c:5468 [inline] lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774 percpu_up_read include/linux/percpu-rwsem.h:99 [inline] __sb_end_write include/linux/fs.h:1650 [inline] sb_end_intwrite include/linux/fs.h:1767 [inline] __btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071 btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 dput.part.0+0x4b1/0x9b0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132 ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182 destroy_inode+0xc4/0x1b0 fs/inode.c:311 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 shrink_kill fs/dcache.c:1048 [inline] shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075 prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156 super_cache_scan+0x32a/0x550 fs/super.c:221 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab_memcg mm/shrinker.c:548 [inline] shrink_slab+0xa87/0x1310 mm/shrinker.c:626 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (fs_reclaim){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e other info that might help us debug this: Chain exists of: fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->log_mutex); lock(btrfs_trans_num_extwriters); lock(&ei->log_mutex); lock(fs_reclaim); *** DEADLOCK *** 7 locks held by syz-executor.1/9919: #0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072 #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline] #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385 #2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388 #3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952 #4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 torvalds#6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 stack backtrace: CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7334579 Code: b8 01 10 06 03 (...) RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix this by ensuring we are under a NOFS scope whenever we call btrfs_iget() during inode logging and log replay. Reported-by: syzbot+8576cfa84070dce4d59b@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000274a3a061abbd928@google.com/ Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] torvalds#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] torvalds#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] torvalds#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] torvalds#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] torvalds#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] torvalds#11 dio_complete at ffffffff8c2b9fa7 torvalds#12 do_blockdev_direct_IO at ffffffff8c2bc09f torvalds#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] torvalds#14 generic_file_direct_write at ffffffff8c1dcf14 torvalds#15 __generic_file_write_iter at ffffffff8c1dd07b torvalds#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] torvalds#17 aio_write at ffffffff8c2cc72e torvalds#18 kmem_cache_alloc at ffffffff8c248dde torvalds#19 do_io_submit at ffffffff8c2ccada torvalds#20 do_syscall_64 at ffffffff8c004984 torvalds#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Bos can be put with multiple unrelated dma-resv locks held. But imported bos attempt to grab the bo dma-resv during dma-buf detach that typically happens during cleanup. That leads to lockde splats similar to the below and a potential ABBA deadlock. Fix this by always taking the delayed workqueue cleanup path for imported bos. Requesting stable fixes from when the Xe driver was introduced, since its usage of drm_exec and wide vm dma_resvs appear to be the first reliable trigger of this. [22982.116427] ============================================ [22982.116428] WARNING: possible recursive locking detected [22982.116429] 6.10.0-rc2+ torvalds#10 Tainted: G U W [22982.116430] -------------------------------------------- [22982.116430] glxgears:sh0/5785 is trying to acquire lock: [22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0 [22982.116438] but task is already holding lock: [22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116442] other info that might help us debug this: [22982.116442] Possible unsafe locking scenario: [22982.116443] CPU0 [22982.116444] ---- [22982.116444] lock(reservation_ww_class_mutex); [22982.116445] lock(reservation_ww_class_mutex); [22982.116447] *** DEADLOCK *** [22982.116447] May be due to missing lock nesting notation [22982.116448] 5 locks held by glxgears:sh0/5785: [22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe] [22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe] [22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe] [22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe] [22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116719] stack backtrace: [22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ torvalds#10 [22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [22982.116723] Call Trace: [22982.116724] <TASK> [22982.116725] dump_stack_lvl+0x77/0xb0 [22982.116727] __lock_acquire+0x1232/0x2160 [22982.116730] lock_acquire+0xcb/0x2d0 [22982.116732] ? dma_buf_detach+0x3b/0xf0 [22982.116734] ? __lock_acquire+0x417/0x2160 [22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0 [22982.116738] ? dma_buf_detach+0x3b/0xf0 [22982.116741] ? dma_buf_detach+0x3b/0xf0 [22982.116743] ? ww_mutex_lock+0x2b/0x90 [22982.116745] ww_mutex_lock+0x2b/0x90 [22982.116747] dma_buf_detach+0x3b/0xf0 [22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm] [22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe] [22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290 [22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec] [22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec] [22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe] [22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe] [22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe] [22982.117025] ? xa_find+0xe3/0x1e0 [22982.117028] xe_file_close+0x10a/0x1c0 [xe] [22982.117074] drm_file_free+0x22a/0x280 [drm] [22982.117099] drm_release_noglobal+0x22/0x70 [drm] [22982.117119] __fput+0xf1/0x2d0 [22982.117122] task_work_run+0x59/0x90 [22982.117125] do_exit+0x330/0xb40 [22982.117127] do_group_exit+0x36/0xa0 [22982.117129] get_signal+0xbd2/0xbe0 [22982.117131] arch_do_signal_or_restart+0x3e/0x240 [22982.117134] syscall_exit_to_user_mode+0x1e7/0x290 [22982.117137] do_syscall_64+0xa1/0x180 [22982.117139] ? lock_acquire+0xcb/0x2d0 [22982.117140] ? __set_task_comm+0x28/0x1e0 [22982.117141] ? find_held_lock+0x2b/0x80 [22982.117144] ? __set_task_comm+0xe1/0x1e0 [22982.117145] ? lock_release+0xca/0x290 [22982.117147] ? __do_sys_prctl+0x245/0xab0 [22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190 [22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290 [22982.117152] ? do_syscall_64+0xa1/0x180 [22982.117154] ? __lock_acquire+0x417/0x2160 [22982.117155] ? reacquire_held_locks+0xd1/0x1f0 [22982.117156] ? do_user_addr_fault+0x30c/0x790 [22982.117158] ? lock_acquire+0xcb/0x2d0 [22982.117160] ? find_held_lock+0x2b/0x80 [22982.117162] ? do_user_addr_fault+0x357/0x790 [22982.117163] ? lock_release+0xca/0x290 [22982.117164] ? do_user_addr_fault+0x361/0x790 [22982.117166] ? trace_hardirqs_off+0x4b/0xc0 [22982.117168] ? clear_bhb_loop+0x45/0xa0 [22982.117170] ? clear_bhb_loop+0x45/0xa0 [22982.117172] ? clear_bhb_loop+0x45/0xa0 [22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e [22982.117176] RIP: 0033:0x7f943d267169 [22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f. [22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169 [22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0 [22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff [22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0 [22982.117202] </TASK> Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: intel-xe@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.8+ Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628153848.4989-1-thomas.hellstrom@linux.intel.com

When putting an inode during extent map shrinking we're doing a standard iput() but that may take a long time in case the inode is dirty and we are doing the final iput that triggers eviction - the VFS will have to wait for writeback before calling the btrfs evict callback (see fs/inode.c:evict()). This slows down the task running the shrinker which may have been triggered while updating some tree for example, meaning locks are held as well as an open transaction handle. Also if the iput() ends up triggering eviction and the inode has no links anymore, then we trigger item truncation which requires flushing delayed items, space reservation to start a transaction and that may trigger the space reclaim task and wait for it, resulting in deadlocks in case the reclaim task needs for example to commit a transaction and the shrinker is being triggered from a path holding a transaction handle. Syzbot reported such a case with the following stack traces: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Not tainted ------------------------------------------------------ kswapd0/111 is trying to acquire lock: ffff88801eae4610 (sb_internal#3){.+.+}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275 but task is already holding lock: ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire mm/page_alloc.c:3783 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3797 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3890 [inline] slab_alloc_node mm/slub.c:3980 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4019 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 create_reloc_inode+0x403/0x820 fs/btrfs/relocation.c:3911 btrfs_relocate_block_group+0x471/0xe60 fs/btrfs/relocation.c:4114 btrfs_relocate_chunk+0x143/0x450 fs/btrfs/volumes.c:3373 __btrfs_balance fs/btrfs/volumes.c:4157 [inline] btrfs_balance+0x211a/0x3f00 fs/btrfs/volumes.c:4534 btrfs_ioctl_balance fs/btrfs/ioctl.c:3675 [inline] btrfs_ioctl+0x12ed/0x8290 fs/btrfs/ioctl.c:4742 __do_compat_sys_ioctl+0x2c3/0x330 fs/ioctl.c:1007 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323 btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999 open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554 btrfs_fill_super fs/btrfs/super.c:946 [inline] btrfs_get_tree_super fs/btrfs/super.c:1863 [inline] btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089 vfs_get_tree+0x8f/0x380 fs/super.c:1780 fc_mount+0x16/0xc0 fs/namespace.c:1125 btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline] btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090 vfs_get_tree+0x8f/0x380 fs/super.c:1780 do_new_mount fs/namespace.c:3352 [inline] path_mount+0x6e1/0x1f10 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount fs/namespace.c:3875 [inline] __ia32_sys_mount+0x295/0x320 fs/namespace.c:3875 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: join_transaction+0x148/0xf40 fs/btrfs/transaction.c:314 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323 btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999 open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554 btrfs_fill_super fs/btrfs/super.c:946 [inline] btrfs_get_tree_super fs/btrfs/super.c:1863 [inline] btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089 vfs_get_tree+0x8f/0x380 fs/super.c:1780 fc_mount+0x16/0xc0 fs/namespace.c:1125 btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline] btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090 vfs_get_tree+0x8f/0x380 fs/super.c:1780 do_new_mount fs/namespace.c:3352 [inline] path_mount+0x6e1/0x1f10 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount fs/namespace.c:3875 [inline] __ia32_sys_mount+0x295/0x320 fs/namespace.c:3875 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #0 (sb_internal#3){.+.+}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write include/linux/fs.h:1655 [inline] sb_start_intwrite include/linux/fs.h:1838 [inline] start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694 btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline] btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189 super_cache_scan+0x409/0x550 fs/super.c:227 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x18a/0x1310 mm/shrinker.c:662 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Chain exists of: sb_internal#3 --> btrfs_trans_num_extwriters --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(btrfs_trans_num_extwriters); lock(fs_reclaim); rlock(sb_internal#3); *** DEADLOCK *** 2 locks held by kswapd0/111: #0: ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924 #1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_trylock_shared fs/super.c:562 [inline] #1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_cache_scan+0x96/0x550 fs/super.c:196 stack backtrace: CPU: 0 PID: 111 Comm: kswapd0 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] __sb_start_write include/linux/fs.h:1655 [inline] sb_start_intwrite include/linux/fs.h:1838 [inline] start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694 btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline] btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189 super_cache_scan+0x409/0x550 fs/super.c:227 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x18a/0x1310 mm/shrinker.c:662 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> So fix this by using btrfs_add_delayed_iput() so that the final iput is delegated to the cleaner kthread. Link: https://lore.kernel.org/linux-btrfs/000000000000892280061a344581@google.com/ Reported-by: syzbot+3dad89b3993a4b275e72@syzkaller.appspotmail.com Fixes: 956a17d ("btrfs: add a shrinker for extent maps") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

shenki and others added 30 commits November 1, 2021 11:52

Merge tag 'fsi-for-v5.16' into dev-5.15

c8450b6

FSI changes for v5.16 - SBEFIFO usersapce interfaces to perform FFDC (First Failure Data Capture) and detect timeouts - A fix to handle multiple messages in flight

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Upstreaming max597x #3

Upstreaming max597x #3

sylv-io commented Jan 6, 2022

Upstreaming max597x #3

Are you sure you want to change the base?

Upstreaming max597x #3

Conversation

sylv-io commented Jan 6, 2022