STM32: gpio SPEED - always set High Speed by default #3840
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Up to now, speed was set for outputs and alternate, but this is also valid for input configuration. By default, let's configure high speed. This is done firts, because speed for some families like F1 is mixed with Input/Output mode settings, so can be later over-ridden if needed.
|
/morph test |
0xc0170
approved these changes
Feb 27, 2017
Result: SUCCESSYour command has finished executing! Here's what you wrote!
OutputAll builds and test passed! |
0xc0170
added
ready for merge
release-version: 5.4.1
and removed
needs: CI
ready for merge
labels
aisair
pushed a commit
to aisair/mbed
that referenced
this pull request
Apr 30, 2024
Ports for Upcoming Targets Fixes and Changes 3716: fix for issue #3715: correction in startup files for ARM and IAR, alignment of system_stm32f429xx.c files ARMmbed/mbed-os#3716 3741: STM32 remove warning in hal_tick_32b.c file ARMmbed/mbed-os#3741 3780: STM32L4 : Fix GPIO G port compatibility ARMmbed/mbed-os#3780 3831: NCS36510: SPISLAVE enabled (Conflict resolved) ARMmbed/mbed-os#3831 3836: Allow to redefine nRF's PSTORAGE_NUM_OF_PAGES outside of the mbed-os ARMmbed/mbed-os#3836 3840: STM32: gpio SPEED - always set High Speed by default ARMmbed/mbed-os#3840 3844: STM32 GPIO: Typo correction. Update comment (GPIO_IP_WITHOUT_BRR) ARMmbed/mbed-os#3844 3850: STM32: change spi error to debug warning ARMmbed/mbed-os#3850 3860: Define GPIO_IP_WITHOUT_BRR for xDot platform ARMmbed/mbed-os#3860 3880: DISCO_F469NI: allow the use of CAN2 instance when CAN1 is not activated ARMmbed/mbed-os#3880 3795: Fix pwm period calc ARMmbed/mbed-os#3795 3828: STM32 CAN API: correct format and type ARMmbed/mbed-os#3828 3842: TARGET_NRF: corrected spi_init() to properly handle re-initialization ARMmbed/mbed-os#3842 3843: STM32L476xG: set APB2 clock to 80MHz (instead of 40MHz) ARMmbed/mbed-os#3843 3879: NUCLEO_F446ZE: Add missing AnalogIn pins on PF_3, PF_5 and PF_10. ARMmbed/mbed-os#3879 3902: Fix heap and stack size for NUCLEO_F746ZG ARMmbed/mbed-os#3902 3829: can_write(): return error code when no tx mailboxes are available ARMmbed/mbed-os#3829
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Up to now, speed was set for outputs and alternate, but this is
also valid for input configuration.
By default, let's configure high speed.
This is done first, because speed for some families like F1 is mixed
with Input/Output mode settings, so can be later over-ridden if needed.
A few sentences describing the overall goals of the pull request's commits.
Status
READY
Related PRs
This is actually a missing piece in GPIO rework done here: #3665