Update fork reflect QMK master as of 10-5-2020 #1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* add * ADD * update * update * update * update * Update rgb_led.c * Update rgb_led.c
* Add keymap for DQM Design Spin macropad * changes from code review * state -> layer_state * Formatting fixes * Formatting fixes * Formatting fixes * Formatting fixes * Formatting fixes
* Add ddeklerk ortho_4x12 layout * Add license header
* Change TMO to use layer_state_set_kb as is customary at the keyboard level. This also factors out `process_indicator_led` to a separate method.
Update DZ60 Personal readme.md and keymap.c * Update readme.md * Update keymap.c * Update keymap.c * Update readme.md * Update readme.md * Update readme.md * Update keymap.c * Update readme.md * Update * Update readme.md * Update keymap.c * Update readme.md
The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash.
* add ref_functions.md translation * modify internal link for ja * update based on comment * reflect #9892 change * update based on comment * update based on comment
* replaced #define PRODUCT_ID 0x1157 with #define PRODUCT_ID 0x2157 replaced product id to distinguish rev2 from rev1. bakingpy gave me permission through discord chat.
* update h88.c * Update keyboards/hineybush/h88/h88.c
* Fixed the LED layout for the bm60rgb * Added underglow support
* Added bm60rgb keymap * Fix copyright
Update ai03 Soyuz readme.md and keymap.c * Update readme.md * Update readme.md * Update keymap.c * Update keymap.c * Update readme.md * Update readme.md * Update readme.md * Update readme.md
* split up the e85 into hotswap and soldered variants * remove layout_all LAYOUT macro for hotswap pcb * add copyright header to to all config files * remove list of alternate bootloaders * spruce up config file * comply with PR check list * Update keyboards/exclusive/e85/hotswap/info.json * Update keyboards/exclusive/e85/hotswap/info.json * Update keyboards/exclusive/e85/hotswap/info.json * Update keyboards/exclusive/e85/rules.mk * Update keyboards/exclusive/e85/config.h * Update keyboards/exclusive/e85/hotswap/config.h * Update keyboards/exclusive/e85/soldered/config.h * remove LAYOUT_all in hotswap and also remove superfluous comments * remove the soldered tsangan map
OLED is turned off by default.
Keebio BDN9 Additional Keymap - Rev Encoders
* Update config.h added debounce to prevent stuttering with some switches * Update README.md
* mattly's mirrored centromere layout * Update keyboards/centromere/keymaps/mattly/keymap.c * Update keyboards/centromere/keymaps/mattly/rules.mk
* add chavdai40 rev2 * add chavdai40 rev2 * change include quantum.h to top of h files
* Initial checkin of my 40percentclub/mf68 keymap * Add gplv2 license header
* Initial Commit for alice clone pcb Initial commit for alice clone pcb * Update keyboards/sneakbox/aliceclone/config.h Change to #pragma once. Thanks. * Update keyboards/sneakbox/aliceclone/config.h * Update keyboards/sneakbox/aliceclone/kb.c * Rename kb.h to aliceclone.h * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c Got it. Thanks. * Update keyboards/sneakbox/aliceclone/readme.md * Update keyboards/sneakbox/aliceclone/readme.md * Update keyboards/sneakbox/aliceclone/rules.mk * Update keymap.c * Rename kb.c to aliceclone.c * Update keyboards/sneakbox/aliceclone/config.h * Update keyboards/sneakbox/aliceclone/aliceclone.h * Update keyboards/sneakbox/aliceclone/aliceclone.h * Update keyboards/sneakbox/aliceclone/aliceclone.h * Update keyboards/sneakbox/aliceclone/config.h Got it. Thanks. * Update keyboards/sneakbox/aliceclone/readme.md Got it, the parent company folder needs to be added for make to find the source. Forgot that. Thanks. * Update keyboards/sneakbox/aliceclone/config.h * Info.json now reflects QMK configurator metadata Previously, .json represented via metadata. * Changed typo ) to } at end of line 9. * Update keymap.c Updated the spacing of the keymap layout to be more readable. * Update keymap.c Updated this VIA keymap for formatting to make it more readable. * Update keymap.c Updated formatting of the rotary encoder function * Update keymap.c * Update info.json Corrected key layout and aligned for straight keymap, removed rotation references * Update keymap.c Adjusted formatting for key layout for readability * Adjusted formatting for key layout for readability Adjusted formatting for key layout for readability * Added GPLv2 License header * Added GPLv2 license header * Update aliceclone.c * Updated the LAYOUT map LAYOUT map now resembles the actual keymap with correct KXY keys corresponding to switch position. * GPLv2 license header added * Update keyboards/sneakbox/aliceclone/config.h * GPLv2 License Header added * Updated License Header, Added keymap layers Added total of 4 keymap layers, fixed keymap visual formatting. License header GPLv2 * Added extra layers, corrected layer references * Updated formatting for keymap.c LAYOUT * Update keyboards/sneakbox/aliceclone/aliceclone.h Updated * Update keyboards/sneakbox/aliceclone/info.json Updated * Update keyboards/sneakbox/aliceclone/info.json Updated * Update keyboards/sneakbox/aliceclone/info.json Updated formatting * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c Reviewed and approved. Thanks. * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c Reviewed. Understood. Thanks. * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c Got it. Removed. * Update keyboards/sneakbox/aliceclone/keymaps/via/keymap.c Agreed. Thanks for the suggestion. * Update keyboards/sneakbox/aliceclone/readme.md * Update keyboards/sneakbox/aliceclone/readme.md * Update keymap.c tabs spaces formatting * Update keymap.c Tabs and spaces. Remove L3 L4 * syntax in enum layer_names removed comma after "_FN" * Update aliceclone.h renamed LAYOUT_all to LAYOUT * Update keymap.c Updated keymap * Update keymap.c * Update keyboards/sneakbox/aliceclone/readme.md * Update keyboards/sneakbox/aliceclone/keymaps/via/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/via/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/via/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/via/keymap.c * Update keyboards/sneakbox/aliceclone/aliceclone.h * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c * Update keyboards/sneakbox/aliceclone/keymaps/default/keymap.c
* mouse_layout * add_mouse_btns * reset_with_ctrl+esc+bspc * add_mousekeys_on_right * mod-tap-mouse-layer * fn_layer
* Adding VIA support for sixkeyboard * Update keyboards/sixkeyboard/keymaps/via/keymap.c * Update keyboards/sixkeyboard/keymaps/via/keymap.c * Update keyboards/sixkeyboard/keymaps/via/keymap.c * Update keyboards/sixkeyboard/keymaps/via/keymap.c * Update keymap.c added suggested header. left my name out and changed year to 2020.
* Remove #define DESCRIPTION * Update readme.md * Update keyboards/readme.md * Update keyboards/readme.md
* [Keyboard] Add keyboard Reviung41 * Modified files * deleted keyboards/reviung41/keymaps/default/config.h * modified keyboards/rebiung41/keymaps/default/keymap.c * modified keyboards/reviung41/readme.md * modified keyboards/reviung41/readme.md * modified keyboards/reviung41/readme.md * Update readme.md Change the image photo of readme.md. * [Keyboard] Add reviung61 * Update readme.md * fix keyboards/reviung61/ and add keymap default_rgb * fix keyboards/reviung61/info.json * fix keyboards/reviung61/info.json * remove keyboards/reviung61/keymaps/default/config.h * [keyboard] Fixed readme.md for reviung39 and 61. * [keyboard] add keyboard reviung33 * fix keyboards/reviung33/rules.mk * modified: keyboards/reving33/config.h * modified: keyboards/reving33/info.json * modified: keyboards/reving33/keymaps/default/keymap.c
* [Driver] bugfix reset the scaling register flag to FALSE * Update drivers/issi/is31fl3741.c Co-authored-by: Ryan <fauxpark@gmail.com> * Add CS & SW defines for ISSI3741 * Make IS31FL3741 control register update clearer Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Jumail Mundekkat <mundekkat@hotmail.com>
* Add Bakeneko 60 keyboard * Apply suggestions from code review
* add reference_info_json.md translation * update based on comment * update based on comment
* WIP working on new keymap * tweaking keymap * updated keymap * cleaned up a little bit * New preonic keymap * my preonic keymap * added mac layout * preonic map update * cleaning up old repo * cleaning up to match upstream * more cleanup * removing old keymaps * Added BM60 Poker * Apply suggestions from code review * Added license * updated license * updated license * Fixed remaining licenses and added layout to rules
* Initializing Boardwalk layout * rules.mk newline * config.h newline * qwerty num toggle -> tap-toggle * errant K, and _LOWER momentary toggles * Lack of autosave sucks * Converting to HHKB layout * TT(_NUM) added to num layer * Final updates for Boardwalk initialization * Final refinements * newline * Removal of extra includes * Update keyboards/boardwalk/keymaps/niclake/config.h #pragma once * Removing comment block from rules * Updates to my layout
* Added via support * Now uses LTO_ENABLE * Deactivated console to save space * Update keyboards/sofle/keymaps/via/readme.md * Added GPL license * Update keyboards/sofle/keymaps/via/keymap.c * Update keyboards/sofle/keymaps/via/keymap.c * Update keyboards/sofle/keymaps/via/keymap.c * Update keyboards/sofle/keymaps/via/keymap.c
* 1 Oct 20 * Update keyboards/clawsome/fightpad/config.h * Update keyboards/clawsome/fightpad/rules.mk * Update keyboards/clawsome/fightpad/info.json * Update keyboards/clawsome/fightpad/readme.md * Update keyboards/clawsome/fightpad/readme.md * Update keyboards/clawsome/fightpad/info.json * Update keyboards/clawsome/fightpad/config.h
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
- add data for LAYOUT_all macro - correct some rounding errors - make the indentation consistent - remove trailing whitespace
* Update reference_info_json.md key_count is now an optional field because it is better to get the keycount by counting the elements in the layout array. * Updated Japanese documentation as well
Currently the XD75 is missing a info.json attributing to non standardised use of QMK
* Fix issue with data transfer of CS1_SW7 to CS18_SW7. * Fix issue with handling of scaling register buffer's dirty flag. * Remove unused extern declaration. * Compaction of struct is31_led utilizing bit fields.
* Fix dirtying in oled_write_pixel() Set the dirty bit for the block only if oled_write_pixel() actually changed the buffer state. Without this check oled_write_pixel() could not be used inside the oled_task_user() code using the “redraw always” style, because the blocks touched by oled_write_pixel() would always appear dirty, and oled_render() would not proceed beyond the first such dirty block. * Fix oled_write_pixel() with 90/270 degree rotation Use oled_rotation_width instead of OLED_DISPLAY_WIDTH, so that a rotated display would be handled correctly. * Fix compilation with custom OLED_BLOCK_COUNT and OLED_BLOCK_SIZE Some OLED sizes (e.g., 64×48) may require a nonstandard value of OLED_BLOCK_COUNT. The documentation says that this value may be redefined in config.h, but actually trying to redefine it caused a compile error, because the macro was redefined in oled_driver.c. Make the OLED_BLOCK_COUNT definition in oled_driver.c respect any user override, and do the same for OLED_BLOCK_SIZE just in case. * Fix handling of out-of-range bits in oled_dirty If a custom OLED_BLOCK_COUNT value is specified, some bits in oled_dirty may not correspond to existing blocks; however, if those bits are set somewhere (e.g., by code with sets oled_dirty to ~0 or even -1), oled_render() would try to handle them and could access memory beyond oled_buffer and perform hardware operations with out of range values. Prevent this by masking off unused bits in oled_render(), and also avoid setting those bits in other functions. * Fix potentially wrong dirtying in oled_write_char() oled_write_char() tried to mark the position just beyond the written character as dirty; use (OLED_FONT_WIDTH - 1) to dirty the last position still belonging to the character instead. * Fix `#define OLED_BLOCK_TYPE uint32_t` on AVR Using uint32_t as OLED_BLOCK_TYPE did not work properly on AVR, because some bit shifts were performed using 16-bit int. Add explicit casts to OLED_BLOCK_TYPE to those shifts.
Co-authored-by: swampmonster <>
* add hannah60rgb_rev2 * add * Update rev2.c * fixed rgb matrix * Update rev2.c * update rules.mk * update readme * update * Update config.h * Update rules.mk
* First pass at manuform layout. * Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer. * Use a 32-bit timer that can actually hit 5 minutes. * Some updates after a day of usage: * Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes. * Turn off the OLEDs after 5 minutes * Move the keys around a bit. * Add many more quotes. * Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots. * Revert osm on lgui as it makes start menu search impossible to use. * Use LTO_ENABLE flag. * License all of my (333fred's) keymaps as MIT. * Update users/333fred/rgb.c Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
* Add kyria keymap * Add planck keymap * Add nyquist keymap * Add vim movement instead of regular movement layer * Use partial home row mods :) * Update keyboards/keebio/nyquist/keymaps/winterNebs/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/keebio/nyquist/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/keebio/nyquist/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/keebio/nyquist/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/keebio/nyquist/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/kyria/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/kyria/keymaps/winterNebs/rules.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/planck/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/planck/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/planck/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Fix outdated function call * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/kyria/keymaps/winterNebs/keymap.c somehow this wasn't added to the batch? Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * remove deprecated function * Rename to lowercase * Update keyboards/planck/keymaps/winterNebs/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * fix oled path * rebase and add back nyquist that was lost by rename * Add licenses * License in the wrong file Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add onekey keymap for OLED testing * Add license header
* Created folder structure and blank files * Update the yugo_m initial blank files * Add yugo_m default keymap * Update yugo_m info.json * Fix yugo_m keymap.c * keymap.c update * Changed subfolder name * File names * Fixed lock LEDs problem * Returned old subfolder name; LEDs fix * Activated anti-ghosting feature in config.h * Update readme.md * Changed LAYOUT to LAYOUT_all * Updated keymap.c * corrected LAYOUT to LAYOUT_all in info.json * Rewritten readme.md according to the template * Removed backslashes from keymap.c * Fixed readme.md * Fixed readme.md again * Tidying up readme.md * Tidying up comments and readme.md * Removed a line from rules.mk * Update keyboards/yugo_m/model_m_101/model_m_101.h Co-authored-by: Joel Challis <git@zvecr.com> * Removed chconf, halconf, mcuconf * Updated LED control * Update keyboards/yugo_m/model_m_101/rules.mk Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/yugo_m/model_m_101/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/yugo_m/model_m_101/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/yugo_m/model_m_101/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/yugo_m/model_m_101/model_m_101.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/yugo_m/readme.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Updated readme.md, there was an outdated info * Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/yugo_m/model_m_101/model_m_101.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/yugo_m/model_m_101/model_m_101.c Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Nidzo Tomic <tomicn8@hotmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
Allow the use of only one IS31FL3731 LED driver
* Add soy20 PCB adds default and VIA Keymaps for soy20 pcb by DrewKeys * Update keyboards/soy20/config.h Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/config.h Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/rules.mk Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/soy20.h Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/keymaps/via/keymap.c Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/keymaps/via/keymap.c Agreed. It was left over from the original file provided by the board makers original configurator file. Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/rules.mk Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/config.h Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/config.h Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/config.h Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/keymaps/default/keymap.c Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/keymaps/default/keymap.c Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/soy20/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/soy20.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/keymaps/via/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/soy20/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Updating *.c & *.h files with GPL3 license * Delete rules.mk * Delete keymap.c * Corrected Header Comments Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com>
* add support for ymd75 rev3 * Update keyboards/ymd75/rev3/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/ymd75/rev3/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * remove DESCRIPTION * only apply offset for rev3 Co-authored-by: Ryan <fauxpark@gmail.com>
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality * Move keymaps to community layouts * Remove keymaps from userspace readme.md Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* Add Initial layout configuration. * Set arduino pro micro's built in RX LED as Numlock * Enable Autoshift feautre. * Remove DVORAK layout. * Add Numpad, update default layer. * Update AutoShift timeout. * Beautify ASCII Art. * Update keymap. * Add Initial verison of RGB lighting. * Add Tap dance, hungarian letters. .Xmodmap example: geripgeri/dotfiles@09f0587 * Update RGB to use only noeeprom functions. * Change default rgb led color. * Add `pragma once`. * Emojis added. * Add tap dance for hungarian letters, multimedia control, slash/backslash. * Remove audio related code. * Add Gaming layer. * Remove unnecessary code, update copyright. * Add readme.md * Implement code review suggestions. * Implement code review suggestions #2 * Remove Auto Shift feature. * Remove Gaming layer.
JYSN
changed the title
|
Re-basing conflict, so squash/merge instead |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Description
Bringing my fork in-line with QMK master, to include newly added keyboards
Types of Changes
Issues Fixed or Closed by This PR
Checklist