Missing steps a lot... #13

hradec · 2011-11-21T22:10:37Z

I'm trying this Marlin_v1 branch, and it seems like my machine is missing steps a lot... Sometimes it's like it completely forget to move in one direction, or move just half of what it should.

Am I missing something important in my Configuration.h that should fix this behaviour or is this some sort of bug?

thanks for any help!

-H

bkubicek · 2011-11-21T22:33:06Z

there are three main settings relevant to lost steps:
you might want to change the acceleration to something suitable to your machine, probably in the start.gcode.

M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate

Then you could also lower your travel feedrate and the maximum feedrates:
M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec

it it happens only at corners lower the xyjerk:
M205 - X= maximum xy jerk, Z=maximum Z jerk

if its because too much material is extruded, lower your e_steps_per_mm
M92 E

Please be aware that all this values are lost on reset.

hradec · 2011-11-21T23:56:12Z

I tried all of then but M204... I was using M201 for acceleration... is it
different from M204?

also, what happens when a buffer underrun happen? by the sound of it, that
may be my problem...

I known for a fact that its not the stepper that is getting stuck for
something, like too much plastic, since when that happens you can hear that
very characteristic sound of the stepper trying to move but can't... In my
case now, the stepper is moving fine, no weird sound or anything and it
just miss some movements... I can't even notice that something is wrong
unless I keep watching the printing...

So, it does look like something in software...

-H
blog http://hradec.blogspot.com/ home http://hradec.com/

On Mon, Nov 21, 2011 at 2:33 PM, Bernhard Kubicek <
reply@reply.github.com

wrote:

there are three main settings relevant to lost steps:
you might want to change the acceleration to something suitable to your
machine, probably in the start.gcode.

M204 - Set default acceleration: S normal moves T filament only moves
(M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms
(B20000) to prevent buffer underruns and M20 minimum feedrate

Then you could also lower your travel feedrate and the maximum feedrates:
M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200
Z300 E10000) in mm/sec

it it happens only at corners lower the xyjerk:
M205 - X= maximum xy jerk, Z=maximum Z jerk

if its because too much material is extruded, lower your e_steps_per_mm
M92 E

Please be aware that all this values are lost on reset.

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13#issuecomment-2822350

ErikZalm · 2011-11-22T10:40:13Z

Hello,

Can you send me the configuration.h ?

Best regards,

Erik van der Zalm

----- Original Message -----
From: "Hradec" reply@reply.github.com
To: "ErikZalm" erik@vdzalm.eu
Sent: Monday, November 21, 2011 11:10:38 PM
Subject: [Marlin] Missing steps a lot... (#13)

I'm trying this Marlin_v1 branch, and it seems like my machine is missing steps a lot... Sometimes it's like it completely forget to move in one direction, or move just half of what it should.

Am I missing something important in my Configuration.h that should fix this behaviour or is this some sort of bug?

thanks for any help!

-H

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13

hradec · 2011-11-22T18:09:04Z

sure...

this is my header in each gcode file netfabb generates:

G28
M92 X71.28 Y71.60 Z3236.25 E30.00
M203 X200 Y200 Z100 E3333
M204 S1000.00 T7000.00
M205 S0.00 T0.00 B20000 X0.33 Z0.01
G92 E0
M106

I don't have my configuration.h file here with me right now, but I'll send
it over in a few hours...

cheers...

-H
blog http://hradec.blogspot.com/ home http://hradec.com/

On Tue, Nov 22, 2011 at 2:40 AM, ErikZalm <
reply@reply.github.com

wrote:

Hello,

Can you send me the configuration.h ?

Best regards,

Erik van der Zalm

----- Original Message -----
From: "Hradec" reply@reply.github.com
To: "ErikZalm" erik@vdzalm.eu
Sent: Monday, November 21, 2011 11:10:38 PM
Subject: [Marlin] Missing steps a lot... (#13)

I'm trying this Marlin_v1 branch, and it seems like my machine is missing
steps a lot... Sometimes it's like it completely forget to move in one
direction, or move just half of what it should.

Am I missing something important in my Configuration.h that should fix
this behaviour or is this some sort of bug?

thanks for any help!

-H

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13#issuecomment-2832855

ErikZalm · 2011-11-22T18:53:28Z

Can you test without the M200 lines?

Those are not used by me and could trigger a bug / configuration problem.

You can make the default in the configuration.h

On Nov 22, 2011, at 7:09 PM, Hradec wrote:

sure...

this is my header in each gcode file netfabb generates:

G28
M92 X71.28 Y71.60 Z3236.25 E30.00
M203 X200 Y200 Z100 E3333
M204 S1000.00 T7000.00
M205 S0.00 T0.00 B20000 X0.33 Z0.01
G92 E0
M106

I don't have my configuration.h file here with me right now, but I'll send
it over in a few hours...

cheers...

-H
blog http://hradec.blogspot.com/ home http://hradec.com/

On Tue, Nov 22, 2011 at 2:40 AM, ErikZalm <
reply@reply.github.com

wrote:

Hello,

Can you send me the configuration.h ?

Best regards,

Erik van der Zalm

----- Original Message -----
From: "Hradec" reply@reply.github.com
To: "ErikZalm" erik@vdzalm.eu
Sent: Monday, November 21, 2011 11:10:38 PM
Subject: [Marlin] Missing steps a lot... (#13)

I'm trying this Marlin_v1 branch, and it seems like my machine is missing
steps a lot... Sometimes it's like it completely forget to move in one
direction, or move just half of what it should.

Am I missing something important in my Configuration.h that should fix
this behaviour or is this some sort of bug?

thanks for any help!

-H

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13#issuecomment-2832855

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/13#issuecomment-2837874

bkubicek · 2011-11-22T19:17:08Z

hradec:
@M92: the z value looks very strange, maybe you misplaced the decimal point?
@M203: 200 mm/sec is quite high, but Z100 is insane. maybe you lost steps in Z, and hence had overdeposition and were hitting the already printed things? Z12 is the max on my printer.
@m204:looks allright
@m205: x and Z are very very low for you, usually you want x to be around 10-40, and z between 1-5.

ErikZalm · 2011-11-25T09:51:47Z

hradec,

When you miss steps. Do you see an endstop message in the host software?
You probably have false endstop triggers.
I will improve the FW to limit the effect of false endstop triggers. But if you have false endstop triggers you should increase the distance between the endstop cables and the motor cables. And even better use shielded cables.

ErikZalm · 2011-11-25T14:36:27Z

hradec,

I just pushed a new version that is less susceptible to endstop noise.

Can you try this one and report the results?

cdaringe · 2011-12-21T06:09:17Z

I used to skip all of the time as well, @hradec . my fix was ~reducing #define DEFAULT_XYJERK & #define DEFAULT_ZJERK @ the bottom of the configuration.h. lowering max accel vals seemed to contribute too. unsure which had greater impact.

#define DEFAULT_MAX_ACCELERATION {200,200,100,10000}
#define DEFAULT_XYJERK 10.0 // (mm/sec)
#define DEFAULT_ZJERK 1 // (mm/sec)

ErikZalm · 2011-12-21T09:43:13Z

If you must lower the acceleration and XY_jerk to these low values you have to check a few things.

Are the axis running smooth?
Increase the motor current
Check for endstop-errors in the pronterface window.
Check your motor. (Are the motors ok for reprap applications)

If you have a relative normal machine then the acceleration of 2000 and xy_jerk of 20 should not be a problem.

cdaringe · 2011-12-22T02:22:18Z

Hi Erik:

I appreciate the input! :)

Axis. Smooth as anyone could ask for. However, with decent belt tension, it is a bit tough to spin the motor spindle.
Motor current. I could look into that but am unsure on the ramifications to motor health. I am using pololu's. I really don't think this is the solution based on the fact that most prints are healthy
No endstop errors.
Yes, decent stationary torque and recommend motors on the wiki

Skipped steps are not the status quo. Rather, they tend to show up on thin features when the x or y axis oscillates back and forth & high speeds/frequencies. I believe this is when i occasionally drop a step. I wrote a brute force algorithm in the sprinter experimental github to force the head to stay stationary for x milliseconds on a direction change to alleviate such 'jerk.' I was excited to see that someone was trying to put nophead's frequency reduction algorithm in Marlin--that's exactly what i wanted!

However, i may bring my accel back up & keep my jerk low.

bkubicek · 2011-12-22T05:54:55Z

if you miss a steps at high frequcency, I think it less a jerk-velocity issue, but your acceleration could be too high.

bkubicek · 2012-05-04T05:55:44Z

is this still an issue? If so, please reopen the issue.

cdaringe · 2012-05-04T06:24:45Z

nah it's closed. i ended up w/ a jerk val of ~15, and i did reduce my accel some as you recommended. shes puttin' out some good lookin prints!

elshad66 · 2014-05-16T16:52:39Z

HI
gathered sla printer firmware sprinter
works perfectly but with ps
decided to install marlin, hooked RepRapDiscount Smart Controller
and run the code from the card
BUT
MARLIN buggy threw
test cube 10x10x10
runs away on X and Y , in Y about 3mm x 1mm to 10mm in height
the speed and acceleration are the same as in sprinter
returned firmware SPRINTER. checked that no problem , everything is perfect
returned MARLIN there are problems
motors not, to say losing a step
board is fully separated from the printer optocouplers . Only minus total
all signal cables are shielded , the inputs ferrites
I think not in the iron problem ,, MARLIN buggy, except of steps still what that throws garbage
here is a video
www.youtube.com/watch?v=yv9Gj8nbedw&feature=youtu.be

which will offer
What's the problem?

Elshad

* # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message #2 will be skipped: # Update Configuration.h # The commit message #3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message #4 will be skipped: # Create Configuration.h # The commit message #5 will be skipped: # Delete Configuration.h # The commit message #6 will be skipped: # Create Test.h # The commit message #7 will be skipped: # Add files via upload # The commit message #8 will be skipped: # Delete Test.h # The commit message #9 will be skipped: # Delete Configuration.h # The commit message #10 will be skipped: # Delete Configuration_adv.h # The commit message #11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message #12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message #13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message #14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message #15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message #16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message #17 will be skipped: # Update boards.h # The commit message #18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates

commit d59d9b5 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sun Sep 1 11:10:35 2019 +0200 Alfawise - LK1/LK2/LK4 and BLTouch (MarlinFirmware#15118) commit ee240d2 Author: weakset <esa.oikari@ejo.fi> Date: Sun Sep 1 12:04:40 2019 +0300 Use Flash-based EEPROM on SKR mini-E3 (MarlinFirmware#15126) commit be051c8 Author: Jason Smith <jason.inet@gmail.com> Date: Sun Sep 1 02:00:20 2019 -0700 Fix Z_STEPPER_ALIGN_[XY] sanity error (MarlinFirmware#15124) commit ee444d7 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sun Sep 1 04:10:50 2019 +0200 Fix SKRmini test required serial port(s) (MarlinFirmware#15117) commit c8e0967 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Sun Sep 1 03:54:36 2019 +0200 Gantry: Enable Filament Change (MarlinFirmware#15122) commit 8778e12 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 20:49:02 2019 -0500 Fix some missed misspellings commit 2747ab7 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Sat Aug 31 18:46:10 2019 -0700 Ender-3 default TMC currents (MarlinFirmware#15115) commit 586b334 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Aug 31 19:44:45 2019 -0500 Split up stepper indirection (MarlinFirmware#15111) commit 87b16ed Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 07:03:36 2019 -0500 Bring Configuration.h up to date commit 8fca850 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 07:00:35 2019 -0500 Patch early env rename commit 25cf7de Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Fri Aug 30 23:40:52 2019 -0700 Disable Tevo Tarantula Pro PIDTEMPBED (MarlinFirmware#15089) commit 66f1da7 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 01:06:22 2019 -0500 Use 'ui.' where possible commit 26fa085 Author: Robby Candra <robbycandra.mail@gmail.com> Date: Sat Aug 31 10:49:24 2019 +0700 Add RGB565 Color Definitions for TFT (MarlinFirmware#15099) commit 9449201 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 23:29:59 2019 -0500 Add more platform Travis tests commit 0f4d3e1 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 18:16:50 2019 -0500 Fix ESP32 "DISABLED" name conflict commit 1eeef30 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 30 19:14:43 2019 -0500 A single generate_click lambda commit c014f8d Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 31 01:15:04 2019 +0200 Fix STM32F1 SPI warning (gcc 8.2.1) (MarlinFirmware#15104) commit d068470 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 31 00:46:09 2019 +0200 Prevent Linux min/max error (MarlinFirmware#15107) commit ba91bca Author: Bob Kuhn <bob.kuhn@att.net> Date: Fri Aug 30 17:39:45 2019 -0500 TMC SPI daisy chain support (experimental) (MarlinFirmware#15081) commit 0bcb644 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 30 16:09:57 2019 -0500 Revert _BV testing commit This reverts commit 9223261. commit 05ef9b2 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 30 14:44:39 2019 -0500 [cron] Bump distribution date commit 2aef83d Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 27 20:28:42 2019 -0500 Add a PlatformIO hook to alter CXXFLAGS commit 23cffb2 Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 27 20:50:48 2019 -0500 Add an env to get the Include Tree commit 9223261 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 17:50:16 2019 -0500 Only define _BV in Marduino.h commit d25231a Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 17:06:18 2019 -0500 Spacing, defined(), #include tweaks commit 7ebfae2 Author: Karl Andersson <karl@iaccess.se> Date: Fri Aug 30 00:00:01 2019 +0200 Fix HAL_STM32 SPI regression (MarlinFirmware#15093) Reference: 0b47558 commit f5a1fab Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Thu Aug 29 14:57:56 2019 -0700 Clarify TMC2209 Sensitivity vs. Others (MarlinFirmware#15092) commit 3f77d6a Author: Ludy <Ludy87@users.noreply.github.com> Date: Thu Aug 29 23:05:22 2019 +0200 Fix expire_status warning (MarlinFirmware#15094) commit 38983fd Author: Robby Candra <robbycandra.mail@gmail.com> Date: Thu Aug 29 13:19:07 2019 +0700 Add 'Back' Button for Touch TFT 320x240 (MarlinFirmware#15060) commit 8196ced Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 00:54:42 2019 -0500 Leave LCD_PINS_Dn defined for other uses Fix MarlinFirmware#14998 commit 0ebaea9 Author: AlexandrZloy <49792082+AlexandrZloy@users.noreply.github.com> Date: Thu Aug 29 12:15:31 2019 +0700 Add stallGuard threshold for X2 (MarlinFirmware#15042) commit e1d65b8 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 00:00:03 2019 -0500 [cron] Bump distribution date commit ca5da02 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Thu Aug 29 06:49:51 2019 +0200 dogm: u8g prototypes cleanup (MarlinFirmware#15082) commit a61c91a Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 28 21:28:21 2019 -0500 Use 'bugfix' branch of U8glib-HAL commit 1d8ad7c Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 28 21:21:38 2019 -0500 Safe changes from HAL cleanup commit 9596312 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 28 08:12:18 2019 -0500 Patch a u8g include commit 7b99c26 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 26 17:52:11 2019 -0500 Fix FTDI_EVE_LIB platform includes commit 3ac76f0 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Wed Aug 28 07:40:18 2019 -0500 Invariant Marlin bootscreen (MarlinFirmware#15057) commit b2a4b6f Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 19:07:13 2019 -0500 Don't use board url as override commit b8e4b99 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 18:57:32 2019 -0500 Separate board website URL commit 6341aef Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 19:05:03 2019 -0500 Info menu tweak style commit 0f386d0 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 28 03:23:13 2019 -0600 Followup fixes to ExtUI (MarlinFirmware#15068) commit 081e450 Author: Luu Lac <45380455+shitcreek@users.noreply.github.com> Date: Wed Aug 28 04:20:28 2019 -0500 Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (MarlinFirmware#15069) commit ca084dc Author: Robby Candra <robbycandra.mail@gmail.com> Date: Wed Aug 28 14:49:21 2019 +0700 Switch col vs row variable name (MarlinFirmware#15072) commit 604bdf0 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Wed Aug 28 09:46:21 2019 +0200 Update Italian language (MarlinFirmware#15076) commit b7796bc Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Wed Aug 28 01:51:01 2019 -0400 Disable steppers on M112 (MarlinFirmware#15065) And change verbiage to not refer to "Emergency Stop." commit 318356b Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 26 00:00:07 2019 -0500 [cron] Bump distribution date commit d2f211c Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 20:52:07 2019 -0500 Gantry followup commit 9d12788 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Mon Aug 26 03:51:06 2019 +0200 ADIMLab Gantry - Spelling Correction (MarlinFirmware#15043) commit 1769f43 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Sun Aug 25 02:47:02 2019 -0700 Fix CR-10/10S/Mini/5S Bed Thermistor Types (MarlinFirmware#15040) commit f218405 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun Aug 25 05:46:02 2019 -0400 Fix ExtUI invalid speed, timer (MarlinFirmware#15031) commit 1557656 Author: Daniel Callander <Knifa@users.noreply.github.com> Date: Sun Aug 25 10:43:53 2019 +0100 Add warning when trying to use JD with kinematic systems (MarlinFirmware#15032) commit 7183a58 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 07:46:30 2019 -0500 Add EZBOARD PT100 pin commit c7825e6 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 04:30:02 2019 -0500 Contrast over 63 assume 255 max This is closer to the prior behavior. commit 1461ee4 Author: Tim Moore <tim@youngmoores.com> Date: Sun Aug 25 02:25:07 2019 -0700 Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (MarlinFirmware#15046) commit 9e9e578 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 00:00:03 2019 -0500 [cron] Bump distribution date commit 8033bc8 Author: Tim Moore <tim@youngmoores.com> Date: Sat Aug 24 17:50:04 2019 -0700 Turbo-back Info menu items (MarlinFirmware#15049) commit d6a1652 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Aug 24 03:40:28 2019 -0500 New Language: Vietnamese (MarlinFirmware#13892) commit f6b604f Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 02:10:50 2019 -0500 Helper Script tweaks commit 7fbf40c Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 02:02:31 2019 -0500 Add command-check to get-bdf2u8g.sh commit da601d5 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 24 00:47:19 2019 -0600 Update USB_FLASH_DRIVE_SUPPORT (MarlinFirmware#15021) commit 20fc66f Merge: 7502569 334777c Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Aug 24 01:45:11 2019 -0500 ADIMLab Granty v1 / v2 (MarlinFirmware#15017) * # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates commit 7502569 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 01:42:38 2019 -0500 Apply #ifdef commit d527c46 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 01:42:28 2019 -0500 Delta: Reduce default MIN_STEPS_PER_SEGMENT commit 848dd74 Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com> Date: Sat Aug 24 14:33:16 2019 +0800 Fix STM32F1 ADC read temperature error (MarlinFirmware#15026) …after USB CDC connect. commit 04a9962 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 00:57:50 2019 -0500 Fix: Contrast override in pins files Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults. commit 334777c Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 00:24:48 2019 -0500 config updates commit 8c73017 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 00:00:04 2019 -0500 [cron] Bump distribution date commit 62d2a65 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 23 23:49:30 2019 -0500 Consolidate Granty configs commit 09ee5a5 Merge: 9d8e3d4 f2ad1ce Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 23 23:45:37 2019 -0500 Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017 commit efeea9b Author: Tim Moore <tim@youngmoores.com> Date: Fri Aug 23 20:30:11 2019 -0700 pca9632_buzz fix (MarlinFirmware#15020) commit e61e54a Author: Marcio Teixeira <marcio@alephobjects.com> Date: Fri Aug 23 21:29:00 2019 -0600 Fix TURBO_BACK_MENU_ITEM compile error (MarlinFirmware#15019) commit 0a280f0 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 24 05:21:30 2019 +0200 Flag unused variables without buzzer (MarlinFirmware#15016) commit f2ad1ce Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 23 20:59:37 2019 -0500 Update PT-BR commit 9c87786 Author: ManuelMcLure <manuel@mclure.org> Date: Fri Aug 23 18:55:41 2019 -0700 Change default Re-ARM UART pin order (MarlinFirmware#15037) commit fdef32c Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 18:17:13 2019 -0500 Shorten Website URLs commit 7924e0d Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 19:36:18 2019 -0500 Add print at position shortcuts commit 5c0e5c5 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 18:01:10 2019 -0500 Fix boot screen warning commit dd6efe9 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 18:56:59 2019 -0500 Restore documented M503 behavior commit 6429b8b Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 17:38:23 2019 -0500 Fix EZBoard platform test commit e604f76 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Thu Aug 22 01:56:39 2019 +0200 Enable contrast via LCD_CONTRAST_INIT (MarlinFirmware#15006) commit 9d8e3d4 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:38:08 2019 +0200 Update pins_HJC2560C_REV2.h commit 2526e2d Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:36:15 2019 +0200 Update Makefile Add ADIMLab Granty v1 commit d858f44 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:34:44 2019 +0200 Update boards.h Add ADIMLab Granty v1 commit c3d1671 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:30:17 2019 +0200 Add files via upload Add ADIMLab Granty v1 commit 778466a Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:29:25 2019 +0200 Create _Bootscreen.h Add Bootscreen commit 42f3549 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:33:36 2019 +0200 Update Configuration.h Added Author + Custom_Machine_Name commit 0309a5f Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:30:08 2019 +0200 Update pins_HJC2560C_REV2.h Updated Description commit 9434b81 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:27:45 2019 +0200 Update boards.h Updated Description commit 6b35951 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:26:25 2019 +0200 Update Makefile Updated Description commit 012f577 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Wed Aug 21 13:22:23 2019 +0200 STM32F1: Import (rogerclarkmelbourne) SPI class (MarlinFirmware#15002) commit 4be9822 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 12:33:17 2019 +0200 ADIMLab Granty pins/config (MarlinFirmware#14919) commit 1fb3c40 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 21 05:30:33 2019 -0500 Optimize bootscreen commit f7aac7a Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Wed Aug 21 05:05:44 2019 -0500 Add Support for ADIMLab Granty commit de122c9 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Sat Aug 10 18:18:27 2019 +0200 # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile commit 4581957 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 21 05:15:31 2019 -0500 Clean up some pins commit bd1ced1 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 21 03:48:06 2019 -0600 LulzBot Touch UI Followup (MarlinFirmware#15007) commit 8c2cfaa Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 20 23:45:38 2019 -0500 Fix BigTree_Btt002 build commit 69641f1 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 21 03:15:37 2019 -0600 Fix incompatible types error (MarlinFirmware#15009) commit 825c2c3 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 21 02:49:43 2019 -0600 Fix fan speed encoder scaling (MarlinFirmware#15010) commit f1942f6 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 21 00:00:04 2019 -0500 [cron] Bump distribution date commit 5e77760 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Tue Aug 20 19:37:03 2019 -0500 Add TURBO_BACK_MENU_ITEM option (MarlinFirmware#14991) commit 0cc524b Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 20 19:08:58 2019 -0500 Prevent BOARD_NAME conflict with env commit 33f6d77 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue Aug 20 04:44:52 2019 -0400 Adjust homing backoff feedrate (MarlinFirmware#14972) commit 5a7c021 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue Aug 20 04:44:17 2019 -0400 Misc. ExtUI fixes (MarlinFirmware#14971) commit 6039893 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue Aug 20 04:42:30 2019 -0400 Creality pins updates (MarlinFirmware#14979) commit 8664b8e Author: MaukCC <jos@mauk.cc> Date: Tue Aug 20 10:40:48 2019 +0200 Adding HMS434 machine (MarlinFirmware#14931) commit 5c6e827 Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 20 03:11:18 2019 -0500 Followup to STM32F407 commit 0b47558 Author: chzj333 <53591189+chzj333@users.noreply.github.com> Date: Tue Aug 20 16:05:12 2019 +0800 New board STM32F407 (MarlinFirmware#14994) commit bb4a252 Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com> Date: Tue Aug 20 16:02:52 2019 +0800 Fix Bigtreetech STM32F40x variants ADC (MarlinFirmware#14996) commit 67f8ba6 Author: Tim Moore <tim@youngmoores.com> Date: Tue Aug 20 00:40:44 2019 -0700 Allow pullup/downs on power loss pin (MarlinFirmware#14986) commit 19e21a8 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Tue Aug 20 00:38:31 2019 -0700 Wanhao Duplicator i3 Mini config updates (MarlinFirmware#14908) commit 05995d1 Author: Ludy <Ludy87@users.noreply.github.com> Date: Tue Aug 20 09:01:37 2019 +0200 Unify buzz methods as MarlinUI::buzz (MarlinFirmware#14803) commit 29c1290 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 19 02:28:12 2019 -0500 Minor HAL patches commit 1432d44 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 19 01:30:28 2019 -0500 Patch circleci config commit 94397db Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 19 00:00:07 2019 -0500 [cron] Bump distribution date commit 17cd1a4 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 14 00:03:12 2019 -0500 Tweak TOUCH_MI_DEPLOY_XPOS block commit dfcd437 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 14 00:00:46 2019 -0500 Base HAS_LCD_CONTRAST on display type commit 3f678b0 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 23:37:15 2019 -0500 Remove some extra F4 conditions commit 4d1a662 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 23:24:55 2019 -0500 Fix STM32F7 STEPPER_ENABLE_PIN commit 08434b3 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 20:49:33 2019 -0500 Add TMC26XStepper, not ignore commit cd09e35 Author: Tim Moore <tim@youngmoores.com> Date: Sun Aug 18 19:17:00 2019 -0700 Remove extra M503 "M412" report (MarlinFirmware#14985) commit c5be59d Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun Aug 18 22:11:33 2019 -0400 Fix runout trigger on "inactive" sensor (MarlinFirmware#14990) commit af5a7a2 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun Aug 18 22:03:26 2019 -0400 Add missing ExtUI user confirmation (MarlinFirmware#14992) commit 33d54c0 Author: Robby Candra <robbycandra.mail@gmail.com> Date: Mon Aug 19 09:00:21 2019 +0700 Remove extra defines (MarlinFirmware#14983) commit 403eefd Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 20:17:25 2019 -0500 Delete _Bootscreen.h commit bc93ac5 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 19:51:37 2019 -0500 Fix #define typo in configs commit d2072f9 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sun Aug 18 19:36:14 2019 -0500 Clean up PlatformIO lib_ignore (MarlinFirmware#14988) Originally from MarlinFirmware#14832. Users may need to delete platformio work folders before building. commit c8e476a Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 18:33:56 2019 -0500 Embed some items in HAS_LCD_MENU commit 9a3ee3b Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 00:00:04 2019 -0500 [cron] Bump distribution date commit 9d9e2de Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 17 20:14:14 2019 -0500 Tweak UBL G29 status print commit 823178c Author: Robby Candra <robbycandra.mail@gmail.com> Date: Sun Aug 18 07:58:38 2019 +0700 Use u8g int type for screen coordinates (MarlinFirmware#14965) commit 6715fd1 Author: Ludy <Ludy87@users.noreply.github.com> Date: Sun Aug 18 01:40:01 2019 +0200 Animated Marlin boot screen (MarlinFirmware#14961) commit 9e49f15 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 17 15:47:17 2019 -0500 [cron] Bump distribution date commit 8bdb3d9 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Fri Aug 16 20:57:19 2019 -0600 Add CONTROLLERFAN_SPEED_Z_ONLY (MarlinFirmware#14956) commit 587d4a6 Author: AnHardt <github@kitelab.de> Date: Sat Aug 17 04:17:10 2019 +0200 Repair display throttling (MarlinFirmware#14960) commit fecf808 Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com> Date: Fri Aug 16 19:15:27 2019 -0700 Fix lambda missing capture (MarlinFirmware#14969) commit 66bfad3 Author: Bob Kuhn <bob.kuhn@att.net> Date: Fri Aug 16 20:06:32 2019 -0500 Fix missing U8glib.h include (MarlinFirmware#14966) commit 1bcc5c9 Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com> Date: Fri Aug 16 18:02:35 2019 -0700 MalyanLCD: Pause, resume, more ExtUI (MarlinFirmware#14852) commit c3ff53a Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 16 18:47:51 2019 -0500 STM32 u8g defines Suggested by MarlinFirmware#14742 (comment) commit 4575978 Author: Tim Moore <tim@youngmoores.com> Date: Fri Aug 16 16:42:24 2019 -0700 Fix auto power for chamber fan (MarlinFirmware#14922) commit 274934a Author: Marcio Teixeira <marcio@alephobjects.com> Date: Fri Aug 16 17:34:13 2019 -0600 Add LULZBOT_TOUCH_UI (MarlinFirmware#14967) commit 179d6c4 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 14 20:05:15 2019 -0600 Add STARTUP_SCRIPT option. M17 parity with M18. (MarlinFirmware#14953) commit 36dfbae Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 14 16:52:57 2019 -0600 Add missing function declaration (MarlinFirmware#14955) commit 263d7d3 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 14 16:52:14 2019 -0600 "SD card" => "Media" (MarlinFirmware#14951) commit 24ce8be Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 14 00:00:11 2019 -0500 [cron] Bump distribution date commit 4cc1039 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Wed Aug 14 06:41:17 2019 +0200 Alfawise Flash EEPROM, Z Servo Probe (MarlinFirmware#14877) commit 0fbb26c Author: Joseph Bozarth <bozarjp@gmail.com> Date: Tue Aug 13 23:38:45 2019 -0500 M16 - Expected Printer Check (MarlinFirmware#14924) commit a26b57a Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 13 19:38:54 2019 -0500 Minor pins cleanup commit 059f575 Author: Acenotass <44540957+Acenotass@users.noreply.github.com> Date: Wed Aug 14 06:19:44 2019 +0600 Update Russian language (MarlinFirmware#14940) commit a67830b Author: Timothy Hoogland <houseofbugs@gmail.com> Date: Tue Aug 13 00:03:42 2019 -0500 TH3D EZBoard is LPC1769 (MarlinFirmware#14936) commit 03df3f4 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Tue Aug 13 02:50:34 2019 +0200 Fix Python scripts unhandled quotes (MarlinFirmware#14926) commit c6be989 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Tue Aug 13 02:48:46 2019 +0200 Store EEPROM config in flash (MarlinFirmware#14923) Avoid confusion between the 2 possible SDs... commit 13d8dc0 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 10 18:25:30 2019 -0600 Fix incorrect print stat in ExtUI (MarlinFirmware#14881) commit dc21e2e Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 10 18:24:41 2019 -0600 Increase XY nozzle offset range (MarlinFirmware#14882) commit fa53384 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 10 18:23:37 2019 -0600 Bury easter egg deeper (MarlinFirmware#14883) commit af4bcb6 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun Aug 11 02:22:48 2019 +0200 SAMD51 typo fix (MarlinFirmware#14885) commit d7172a4 Author: Ludy <Ludy87@users.noreply.github.com> Date: Sun Aug 11 02:22:18 2019 +0200 Cleanup and conditions (MarlinFirmware#14886) commit 03dbe16 Author: Johnny Eshak <info@johnnytheone.com> Date: Sun Aug 11 02:20:40 2019 +0200 Compiling M43 on invalid conversion (MarlinFirmware#14897) commit f085199 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun Aug 11 02:19:52 2019 +0200 SAMD51: Some LCD pin fixes (MarlinFirmware#14915) commit d78086c Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun Aug 11 02:18:32 2019 +0200 SAMD51: Neopixel pin mapping (MarlinFirmware#14913) commit 9c5086e Author: Eric Ptak <trouch@trouch.com> Date: Sun Aug 11 02:14:31 2019 +0200 [STM32F1] Simpler Flash EEPROM (MarlinFirmware#14829) commit 0745d48 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sun Aug 11 01:22:11 2019 +0200 Fix build with and without TOUCH_BUTTONS (MarlinFirmware#14912) commit e7aba49 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Fri Aug 9 23:53:55 2019 -0700 Update PB5 to correct pin number (MarlinFirmware#14891) commit 5ea5d71 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Fri Aug 9 23:52:26 2019 -0700 Tevo Michelangelo config updates (MarlinFirmware#14895) commit 5d2519e Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 10 08:45:36 2019 +0200 Allow use of Fysetc SoftwareSerialM (MarlinFirmware#14893) commit d2d71ca Author: Robby Candra <robbycandra.mail@gmail.com> Date: Sat Aug 10 13:42:52 2019 +0700 Clean up Touch pins. Better up/down touch response. (MarlinFirmware#14900) commit 8cc0b4b Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 10 07:58:21 2019 +0200 Revert "Edit STEPS_PER_MM integer only" (MarlinFirmware#14909) This reverts commit 2d98bb3. commit 3129fd0 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sat Aug 10 07:56:55 2019 +0200 SAMD51: Update LCD pins (MarlinFirmware#14907) commit 9479ec3 Author: Ludy <Ludy87@users.noreply.github.com> Date: Sat Aug 10 07:53:26 2019 +0200 Fix Service Menu compile error (MarlinFirmware#14903) commit a7f1021 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sat Aug 10 00:00:20 2019 +0200 Fix SPI_ENDSTOPS compile error (MarlinFirmware#14906)

commit 12c595c Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Mon Sep 2 12:45:02 2019 +0200 SAMD51 LCD support (MarlinFirmware#15113) commit 23bb40d Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Sep 2 05:24:24 2019 -0500 Fix MKS_MINI_12864 init See MarlinFirmware#13550 Co-Authored-By: DrDitto <drditto@users.noreply.github.com> commit 9958f5e Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Mon Sep 2 09:44:48 2019 +0200 Home on G34 if steppers slept (MarlinFirmware#15127) commit 59152f2 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Mon Sep 2 00:42:11 2019 -0700 Flash-based EEPROM on SKR Mini E3 DIP (MarlinFirmware#15128) commit c981710 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Mon Sep 2 09:40:33 2019 +0200 Update French language (MarlinFirmware#15129) commit e6a114b Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Mon Sep 2 09:39:40 2019 +0200 Update Italian language (MarlinFirmware#15130) commit b97bb14 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Mon Sep 2 09:37:50 2019 +0200 Full-featured Alfawise U20 config (MarlinFirmware#15131) commit 5406982 Author: Gustavo Alvarez <462213+sl1pkn07@users.noreply.github.com> Date: Mon Sep 2 09:36:32 2019 +0200 Update Spanish language (MarlinFirmware#15132) commit f6505c8 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Mon Sep 2 00:35:59 2019 -0700 Fix Ender-3 Status Screen Y Offset (MarlinFirmware#15136) commit 93dcc22 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Sep 2 01:09:45 2019 -0500 Drop extra call to get_available_commands commit 451a942 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Sep 2 01:04:00 2019 -0500 Suspend queue during wait_for_hotend commit b4715b2 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Sep 2 00:00:04 2019 -0500 [cron] Bump distribution date commit 34b7342 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Sep 1 23:54:41 2019 -0500 Apply #ifdef/#ifndef where possible commit 4078f26 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Sep 1 23:43:38 2019 -0500 Apply shorthand option macros commit a2e412c Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Sep 1 20:21:11 2019 -0500 Rename command buffer var commit d59d9b5 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sun Sep 1 11:10:35 2019 +0200 Alfawise - LK1/LK2/LK4 and BLTouch (MarlinFirmware#15118) commit ee240d2 Author: weakset <esa.oikari@ejo.fi> Date: Sun Sep 1 12:04:40 2019 +0300 Use Flash-based EEPROM on SKR mini-E3 (MarlinFirmware#15126) commit be051c8 Author: Jason Smith <jason.inet@gmail.com> Date: Sun Sep 1 02:00:20 2019 -0700 Fix Z_STEPPER_ALIGN_[XY] sanity error (MarlinFirmware#15124) commit ee444d7 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sun Sep 1 04:10:50 2019 +0200 Fix SKRmini test required serial port(s) (MarlinFirmware#15117) commit c8e0967 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Sun Sep 1 03:54:36 2019 +0200 Gantry: Enable Filament Change (MarlinFirmware#15122) commit 8778e12 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 20:49:02 2019 -0500 Fix some missed misspellings commit 2747ab7 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Sat Aug 31 18:46:10 2019 -0700 Ender-3 default TMC currents (MarlinFirmware#15115) commit 586b334 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Aug 31 19:44:45 2019 -0500 Split up stepper indirection (MarlinFirmware#15111) commit 87b16ed Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 07:03:36 2019 -0500 Bring Configuration.h up to date commit 8fca850 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 07:00:35 2019 -0500 Patch early env rename commit 25cf7de Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Fri Aug 30 23:40:52 2019 -0700 Disable Tevo Tarantula Pro PIDTEMPBED (MarlinFirmware#15089) commit 66f1da7 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 31 01:06:22 2019 -0500 Use 'ui.' where possible commit 26fa085 Author: Robby Candra <robbycandra.mail@gmail.com> Date: Sat Aug 31 10:49:24 2019 +0700 Add RGB565 Color Definitions for TFT (MarlinFirmware#15099) commit 9449201 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 23:29:59 2019 -0500 Add more platform Travis tests commit 0f4d3e1 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 18:16:50 2019 -0500 Fix ESP32 "DISABLED" name conflict commit 1eeef30 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 30 19:14:43 2019 -0500 A single generate_click lambda commit c014f8d Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 31 01:15:04 2019 +0200 Fix STM32F1 SPI warning (gcc 8.2.1) (MarlinFirmware#15104) commit d068470 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 31 00:46:09 2019 +0200 Prevent Linux min/max error (MarlinFirmware#15107) commit ba91bca Author: Bob Kuhn <bob.kuhn@att.net> Date: Fri Aug 30 17:39:45 2019 -0500 TMC SPI daisy chain support (experimental) (MarlinFirmware#15081) commit 0bcb644 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 30 16:09:57 2019 -0500 Revert _BV testing commit This reverts commit 9223261. commit 05ef9b2 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 30 14:44:39 2019 -0500 [cron] Bump distribution date commit 2aef83d Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 27 20:28:42 2019 -0500 Add a PlatformIO hook to alter CXXFLAGS commit 23cffb2 Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 27 20:50:48 2019 -0500 Add an env to get the Include Tree commit 9223261 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 17:50:16 2019 -0500 Only define _BV in Marduino.h commit d25231a Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 17:06:18 2019 -0500 Spacing, defined(), #include tweaks commit 7ebfae2 Author: Karl Andersson <karl@iaccess.se> Date: Fri Aug 30 00:00:01 2019 +0200 Fix HAL_STM32 SPI regression (MarlinFirmware#15093) Reference: 0b47558 commit f5a1fab Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Thu Aug 29 14:57:56 2019 -0700 Clarify TMC2209 Sensitivity vs. Others (MarlinFirmware#15092) commit 3f77d6a Author: Ludy <Ludy87@users.noreply.github.com> Date: Thu Aug 29 23:05:22 2019 +0200 Fix expire_status warning (MarlinFirmware#15094) commit 38983fd Author: Robby Candra <robbycandra.mail@gmail.com> Date: Thu Aug 29 13:19:07 2019 +0700 Add 'Back' Button for Touch TFT 320x240 (MarlinFirmware#15060) commit 8196ced Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 00:54:42 2019 -0500 Leave LCD_PINS_Dn defined for other uses Fix MarlinFirmware#14998 commit 0ebaea9 Author: AlexandrZloy <49792082+AlexandrZloy@users.noreply.github.com> Date: Thu Aug 29 12:15:31 2019 +0700 Add stallGuard threshold for X2 (MarlinFirmware#15042) commit e1d65b8 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 29 00:00:03 2019 -0500 [cron] Bump distribution date commit ca5da02 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Thu Aug 29 06:49:51 2019 +0200 dogm: u8g prototypes cleanup (MarlinFirmware#15082) commit a61c91a Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 28 21:28:21 2019 -0500 Use 'bugfix' branch of U8glib-HAL commit 1d8ad7c Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 28 21:21:38 2019 -0500 Safe changes from HAL cleanup commit 9596312 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 28 08:12:18 2019 -0500 Patch a u8g include commit 7b99c26 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 26 17:52:11 2019 -0500 Fix FTDI_EVE_LIB platform includes commit 3ac76f0 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Wed Aug 28 07:40:18 2019 -0500 Invariant Marlin bootscreen (MarlinFirmware#15057) commit b2a4b6f Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 19:07:13 2019 -0500 Don't use board url as override commit b8e4b99 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 18:57:32 2019 -0500 Separate board website URL commit 6341aef Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 19:05:03 2019 -0500 Info menu tweak style commit 0f386d0 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 28 03:23:13 2019 -0600 Followup fixes to ExtUI (MarlinFirmware#15068) commit 081e450 Author: Luu Lac <45380455+shitcreek@users.noreply.github.com> Date: Wed Aug 28 04:20:28 2019 -0500 Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (MarlinFirmware#15069) commit ca084dc Author: Robby Candra <robbycandra.mail@gmail.com> Date: Wed Aug 28 14:49:21 2019 +0700 Switch col vs row variable name (MarlinFirmware#15072) commit 604bdf0 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Wed Aug 28 09:46:21 2019 +0200 Update Italian language (MarlinFirmware#15076) commit b7796bc Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Wed Aug 28 01:51:01 2019 -0400 Disable steppers on M112 (MarlinFirmware#15065) And change verbiage to not refer to "Emergency Stop." commit 318356b Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 26 00:00:07 2019 -0500 [cron] Bump distribution date commit d2f211c Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 20:52:07 2019 -0500 Gantry followup commit 9d12788 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Mon Aug 26 03:51:06 2019 +0200 ADIMLab Gantry - Spelling Correction (MarlinFirmware#15043) commit 1769f43 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Sun Aug 25 02:47:02 2019 -0700 Fix CR-10/10S/Mini/5S Bed Thermistor Types (MarlinFirmware#15040) commit f218405 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun Aug 25 05:46:02 2019 -0400 Fix ExtUI invalid speed, timer (MarlinFirmware#15031) commit 1557656 Author: Daniel Callander <Knifa@users.noreply.github.com> Date: Sun Aug 25 10:43:53 2019 +0100 Add warning when trying to use JD with kinematic systems (MarlinFirmware#15032) commit 7183a58 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 07:46:30 2019 -0500 Add EZBOARD PT100 pin commit c7825e6 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 04:30:02 2019 -0500 Contrast over 63 assume 255 max This is closer to the prior behavior. commit 1461ee4 Author: Tim Moore <tim@youngmoores.com> Date: Sun Aug 25 02:25:07 2019 -0700 Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (MarlinFirmware#15046) commit 9e9e578 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 25 00:00:03 2019 -0500 [cron] Bump distribution date commit 8033bc8 Author: Tim Moore <tim@youngmoores.com> Date: Sat Aug 24 17:50:04 2019 -0700 Turbo-back Info menu items (MarlinFirmware#15049) commit d6a1652 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Aug 24 03:40:28 2019 -0500 New Language: Vietnamese (MarlinFirmware#13892) commit f6b604f Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 02:10:50 2019 -0500 Helper Script tweaks commit 7fbf40c Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 02:02:31 2019 -0500 Add command-check to get-bdf2u8g.sh commit da601d5 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 24 00:47:19 2019 -0600 Update USB_FLASH_DRIVE_SUPPORT (MarlinFirmware#15021) commit 20fc66f Merge: 7502569 334777c Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Aug 24 01:45:11 2019 -0500 ADIMLab Granty v1 / v2 (MarlinFirmware#15017) * # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile * Add Support for ADIMLab Granty * Optimize bootscreen * Update Makefile Updated Description * Update boards.h Updated Description * Update pins_HJC2560C_REV2.h Updated Description * Update Configuration.h Added Author + Custom_Machine_Name * Create _Bootscreen.h Add Bootscreen * Add files via upload Add ADIMLab Granty v1 * Update boards.h Add ADIMLab Granty v1 * Update Makefile Add ADIMLab Granty v1 * Update pins_HJC2560C_REV2.h * Consolidate Granty configs * config updates commit 7502569 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 01:42:38 2019 -0500 Apply #ifdef commit d527c46 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 01:42:28 2019 -0500 Delta: Reduce default MIN_STEPS_PER_SEGMENT commit 848dd74 Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com> Date: Sat Aug 24 14:33:16 2019 +0800 Fix STM32F1 ADC read temperature error (MarlinFirmware#15026) …after USB CDC connect. commit 04a9962 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 00:57:50 2019 -0500 Fix: Contrast override in pins files Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults. commit 334777c Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 00:24:48 2019 -0500 config updates commit 8c73017 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 24 00:00:04 2019 -0500 [cron] Bump distribution date commit 62d2a65 Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 23 23:49:30 2019 -0500 Consolidate Granty configs commit 09ee5a5 Merge: 9d8e3d4 f2ad1ce Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 23 23:45:37 2019 -0500 Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017 commit efeea9b Author: Tim Moore <tim@youngmoores.com> Date: Fri Aug 23 20:30:11 2019 -0700 pca9632_buzz fix (MarlinFirmware#15020) commit e61e54a Author: Marcio Teixeira <marcio@alephobjects.com> Date: Fri Aug 23 21:29:00 2019 -0600 Fix TURBO_BACK_MENU_ITEM compile error (MarlinFirmware#15019) commit 0a280f0 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 24 05:21:30 2019 +0200 Flag unused variables without buzzer (MarlinFirmware#15016) commit f2ad1ce Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 23 20:59:37 2019 -0500 Update PT-BR commit 9c87786 Author: ManuelMcLure <manuel@mclure.org> Date: Fri Aug 23 18:55:41 2019 -0700 Change default Re-ARM UART pin order (MarlinFirmware#15037) commit fdef32c Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 18:17:13 2019 -0500 Shorten Website URLs commit 7924e0d Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 19:36:18 2019 -0500 Add print at position shortcuts commit 5c0e5c5 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 18:01:10 2019 -0500 Fix boot screen warning commit dd6efe9 Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 18:56:59 2019 -0500 Restore documented M503 behavior commit 6429b8b Author: Scott Lahteine <github@thinkyhead.com> Date: Thu Aug 22 17:38:23 2019 -0500 Fix EZBoard platform test commit e604f76 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Thu Aug 22 01:56:39 2019 +0200 Enable contrast via LCD_CONTRAST_INIT (MarlinFirmware#15006) commit 9d8e3d4 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:38:08 2019 +0200 Update pins_HJC2560C_REV2.h commit 2526e2d Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:36:15 2019 +0200 Update Makefile Add ADIMLab Granty v1 commit d858f44 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:34:44 2019 +0200 Update boards.h Add ADIMLab Granty v1 commit c3d1671 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:30:17 2019 +0200 Add files via upload Add ADIMLab Granty v1 commit 778466a Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 17:29:25 2019 +0200 Create _Bootscreen.h Add Bootscreen commit 42f3549 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:33:36 2019 +0200 Update Configuration.h Added Author + Custom_Machine_Name commit 0309a5f Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:30:08 2019 +0200 Update pins_HJC2560C_REV2.h Updated Description commit 9434b81 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:27:45 2019 +0200 Update boards.h Updated Description commit 6b35951 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 16:26:25 2019 +0200 Update Makefile Updated Description commit 012f577 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Wed Aug 21 13:22:23 2019 +0200 STM32F1: Import (rogerclarkmelbourne) SPI class (MarlinFirmware#15002) commit 4be9822 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Wed Aug 21 12:33:17 2019 +0200 ADIMLab Granty pins/config (MarlinFirmware#14919) commit 1fb3c40 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 21 05:30:33 2019 -0500 Optimize bootscreen commit f7aac7a Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Wed Aug 21 05:05:44 2019 -0500 Add Support for ADIMLab Granty commit de122c9 Author: ETE-Design <Mikkel@MPEntreprise.Dk> Date: Sat Aug 10 18:18:27 2019 +0200 # This is a combination of 18 commits. # This is the 1st commit message: Add Support for ADIMLab Granty # The commit message MarlinFirmware#2 will be skipped: # Update Configuration.h # The commit message MarlinFirmware#3 will be skipped: # Add files via upload # # Add Support for ADIMLab Granty # The commit message MarlinFirmware#4 will be skipped: # Create Configuration.h # The commit message MarlinFirmware#5 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#6 will be skipped: # Create Test.h # The commit message MarlinFirmware#7 will be skipped: # Add files via upload # The commit message MarlinFirmware#8 will be skipped: # Delete Test.h # The commit message MarlinFirmware#9 will be skipped: # Delete Configuration.h # The commit message MarlinFirmware#10 will be skipped: # Delete Configuration_adv.h # The commit message MarlinFirmware#11 will be skipped: # Add files via upload # # Add ADIMLab Pins # The commit message MarlinFirmware#12 will be skipped: # Add files via upload # # Add Bootscreen # The commit message MarlinFirmware#13 will be skipped: # Update Configuration.h # # Add Bootscreen # The commit message MarlinFirmware#14 will be skipped: # Update pins.h # # Add ADIMLab Board # The commit message MarlinFirmware#15 will be skipped: # Update boards.h # # Add ADIMLab Granty # The commit message MarlinFirmware#16 will be skipped: # Update Makefile # # Add ADIMLab Granty # The commit message MarlinFirmware#17 will be skipped: # Update boards.h # The commit message MarlinFirmware#18 will be skipped: # Update Makefile commit 4581957 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 21 05:15:31 2019 -0500 Clean up some pins commit bd1ced1 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 21 03:48:06 2019 -0600 LulzBot Touch UI Followup (MarlinFirmware#15007) commit 8c2cfaa Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 20 23:45:38 2019 -0500 Fix BigTree_Btt002 build commit 69641f1 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 21 03:15:37 2019 -0600 Fix incompatible types error (MarlinFirmware#15009) commit 825c2c3 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 21 02:49:43 2019 -0600 Fix fan speed encoder scaling (MarlinFirmware#15010) commit f1942f6 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 21 00:00:04 2019 -0500 [cron] Bump distribution date commit 5e77760 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Tue Aug 20 19:37:03 2019 -0500 Add TURBO_BACK_MENU_ITEM option (MarlinFirmware#14991) commit 0cc524b Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 20 19:08:58 2019 -0500 Prevent BOARD_NAME conflict with env commit 33f6d77 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue Aug 20 04:44:52 2019 -0400 Adjust homing backoff feedrate (MarlinFirmware#14972) commit 5a7c021 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue Aug 20 04:44:17 2019 -0400 Misc. ExtUI fixes (MarlinFirmware#14971) commit 6039893 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Tue Aug 20 04:42:30 2019 -0400 Creality pins updates (MarlinFirmware#14979) commit 8664b8e Author: MaukCC <jos@mauk.cc> Date: Tue Aug 20 10:40:48 2019 +0200 Adding HMS434 machine (MarlinFirmware#14931) commit 5c6e827 Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 20 03:11:18 2019 -0500 Followup to STM32F407 commit 0b47558 Author: chzj333 <53591189+chzj333@users.noreply.github.com> Date: Tue Aug 20 16:05:12 2019 +0800 New board STM32F407 (MarlinFirmware#14994) commit bb4a252 Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com> Date: Tue Aug 20 16:02:52 2019 +0800 Fix Bigtreetech STM32F40x variants ADC (MarlinFirmware#14996) commit 67f8ba6 Author: Tim Moore <tim@youngmoores.com> Date: Tue Aug 20 00:40:44 2019 -0700 Allow pullup/downs on power loss pin (MarlinFirmware#14986) commit 19e21a8 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Tue Aug 20 00:38:31 2019 -0700 Wanhao Duplicator i3 Mini config updates (MarlinFirmware#14908) commit 05995d1 Author: Ludy <Ludy87@users.noreply.github.com> Date: Tue Aug 20 09:01:37 2019 +0200 Unify buzz methods as MarlinUI::buzz (MarlinFirmware#14803) commit 29c1290 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 19 02:28:12 2019 -0500 Minor HAL patches commit 1432d44 Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 19 01:30:28 2019 -0500 Patch circleci config commit 94397db Author: Scott Lahteine <github@thinkyhead.com> Date: Mon Aug 19 00:00:07 2019 -0500 [cron] Bump distribution date commit 17cd1a4 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 14 00:03:12 2019 -0500 Tweak TOUCH_MI_DEPLOY_XPOS block commit dfcd437 Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 14 00:00:46 2019 -0500 Base HAS_LCD_CONTRAST on display type commit 3f678b0 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 23:37:15 2019 -0500 Remove some extra F4 conditions commit 4d1a662 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 23:24:55 2019 -0500 Fix STM32F7 STEPPER_ENABLE_PIN commit 08434b3 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 20:49:33 2019 -0500 Add TMC26XStepper, not ignore commit cd09e35 Author: Tim Moore <tim@youngmoores.com> Date: Sun Aug 18 19:17:00 2019 -0700 Remove extra M503 "M412" report (MarlinFirmware#14985) commit c5be59d Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun Aug 18 22:11:33 2019 -0400 Fix runout trigger on "inactive" sensor (MarlinFirmware#14990) commit af5a7a2 Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com> Date: Sun Aug 18 22:03:26 2019 -0400 Add missing ExtUI user confirmation (MarlinFirmware#14992) commit 33d54c0 Author: Robby Candra <robbycandra.mail@gmail.com> Date: Mon Aug 19 09:00:21 2019 +0700 Remove extra defines (MarlinFirmware#14983) commit 403eefd Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 20:17:25 2019 -0500 Delete _Bootscreen.h commit bc93ac5 Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 19:51:37 2019 -0500 Fix #define typo in configs commit d2072f9 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sun Aug 18 19:36:14 2019 -0500 Clean up PlatformIO lib_ignore (MarlinFirmware#14988) Originally from MarlinFirmware#14832. Users may need to delete platformio work folders before building. commit c8e476a Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 18:33:56 2019 -0500 Embed some items in HAS_LCD_MENU commit 9a3ee3b Author: Scott Lahteine <github@thinkyhead.com> Date: Sun Aug 18 00:00:04 2019 -0500 [cron] Bump distribution date commit 9d9e2de Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 17 20:14:14 2019 -0500 Tweak UBL G29 status print commit 823178c Author: Robby Candra <robbycandra.mail@gmail.com> Date: Sun Aug 18 07:58:38 2019 +0700 Use u8g int type for screen coordinates (MarlinFirmware#14965) commit 6715fd1 Author: Ludy <Ludy87@users.noreply.github.com> Date: Sun Aug 18 01:40:01 2019 +0200 Animated Marlin boot screen (MarlinFirmware#14961) commit 9e49f15 Author: Scott Lahteine <github@thinkyhead.com> Date: Sat Aug 17 15:47:17 2019 -0500 [cron] Bump distribution date commit 8bdb3d9 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Fri Aug 16 20:57:19 2019 -0600 Add CONTROLLERFAN_SPEED_Z_ONLY (MarlinFirmware#14956) commit 587d4a6 Author: AnHardt <github@kitelab.de> Date: Sat Aug 17 04:17:10 2019 +0200 Repair display throttling (MarlinFirmware#14960) commit fecf808 Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com> Date: Fri Aug 16 19:15:27 2019 -0700 Fix lambda missing capture (MarlinFirmware#14969) commit 66bfad3 Author: Bob Kuhn <bob.kuhn@att.net> Date: Fri Aug 16 20:06:32 2019 -0500 Fix missing U8glib.h include (MarlinFirmware#14966) commit 1bcc5c9 Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com> Date: Fri Aug 16 18:02:35 2019 -0700 MalyanLCD: Pause, resume, more ExtUI (MarlinFirmware#14852) commit c3ff53a Author: Scott Lahteine <github@thinkyhead.com> Date: Fri Aug 16 18:47:51 2019 -0500 STM32 u8g defines Suggested by MarlinFirmware#14742 (comment) commit 4575978 Author: Tim Moore <tim@youngmoores.com> Date: Fri Aug 16 16:42:24 2019 -0700 Fix auto power for chamber fan (MarlinFirmware#14922) commit 274934a Author: Marcio Teixeira <marcio@alephobjects.com> Date: Fri Aug 16 17:34:13 2019 -0600 Add LULZBOT_TOUCH_UI (MarlinFirmware#14967) commit 179d6c4 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 14 20:05:15 2019 -0600 Add STARTUP_SCRIPT option. M17 parity with M18. (MarlinFirmware#14953) commit 36dfbae Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 14 16:52:57 2019 -0600 Add missing function declaration (MarlinFirmware#14955) commit 263d7d3 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Wed Aug 14 16:52:14 2019 -0600 "SD card" => "Media" (MarlinFirmware#14951) commit 24ce8be Author: Scott Lahteine <github@thinkyhead.com> Date: Wed Aug 14 00:00:11 2019 -0500 [cron] Bump distribution date commit 4cc1039 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Wed Aug 14 06:41:17 2019 +0200 Alfawise Flash EEPROM, Z Servo Probe (MarlinFirmware#14877) commit 0fbb26c Author: Joseph Bozarth <bozarjp@gmail.com> Date: Tue Aug 13 23:38:45 2019 -0500 M16 - Expected Printer Check (MarlinFirmware#14924) commit a26b57a Author: Scott Lahteine <github@thinkyhead.com> Date: Tue Aug 13 19:38:54 2019 -0500 Minor pins cleanup commit 059f575 Author: Acenotass <44540957+Acenotass@users.noreply.github.com> Date: Wed Aug 14 06:19:44 2019 +0600 Update Russian language (MarlinFirmware#14940) commit a67830b Author: Timothy Hoogland <houseofbugs@gmail.com> Date: Tue Aug 13 00:03:42 2019 -0500 TH3D EZBoard is LPC1769 (MarlinFirmware#14936) commit 03df3f4 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Tue Aug 13 02:50:34 2019 +0200 Fix Python scripts unhandled quotes (MarlinFirmware#14926) commit c6be989 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Tue Aug 13 02:48:46 2019 +0200 Store EEPROM config in flash (MarlinFirmware#14923) Avoid confusion between the 2 possible SDs... commit 13d8dc0 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 10 18:25:30 2019 -0600 Fix incorrect print stat in ExtUI (MarlinFirmware#14881) commit dc21e2e Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 10 18:24:41 2019 -0600 Increase XY nozzle offset range (MarlinFirmware#14882) commit fa53384 Author: Marcio Teixeira <marcio@alephobjects.com> Date: Sat Aug 10 18:23:37 2019 -0600 Bury easter egg deeper (MarlinFirmware#14883) commit af4bcb6 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun Aug 11 02:22:48 2019 +0200 SAMD51 typo fix (MarlinFirmware#14885) commit d7172a4 Author: Ludy <Ludy87@users.noreply.github.com> Date: Sun Aug 11 02:22:18 2019 +0200 Cleanup and conditions (MarlinFirmware#14886) commit 03dbe16 Author: Johnny Eshak <info@johnnytheone.com> Date: Sun Aug 11 02:20:40 2019 +0200 Compiling M43 on invalid conversion (MarlinFirmware#14897) commit f085199 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun Aug 11 02:19:52 2019 +0200 SAMD51: Some LCD pin fixes (MarlinFirmware#14915) commit d78086c Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sun Aug 11 02:18:32 2019 +0200 SAMD51: Neopixel pin mapping (MarlinFirmware#14913) commit 9c5086e Author: Eric Ptak <trouch@trouch.com> Date: Sun Aug 11 02:14:31 2019 +0200 [STM32F1] Simpler Flash EEPROM (MarlinFirmware#14829) commit 0745d48 Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sun Aug 11 01:22:11 2019 +0200 Fix build with and without TOUCH_BUTTONS (MarlinFirmware#14912) commit e7aba49 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Fri Aug 9 23:53:55 2019 -0700 Update PB5 to correct pin number (MarlinFirmware#14891) commit 5ea5d71 Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Date: Fri Aug 9 23:52:26 2019 -0700 Tevo Michelangelo config updates (MarlinFirmware#14895) commit 5d2519e Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 10 08:45:36 2019 +0200 Allow use of Fysetc SoftwareSerialM (MarlinFirmware#14893) commit d2d71ca Author: Robby Candra <robbycandra.mail@gmail.com> Date: Sat Aug 10 13:42:52 2019 +0700 Clean up Touch pins. Better up/down touch response. (MarlinFirmware#14900) commit 8cc0b4b Author: Tanguy Pruvot <tpruvot@users.noreply.github.com> Date: Sat Aug 10 07:58:21 2019 +0200 Revert "Edit STEPS_PER_MM integer only" (MarlinFirmware#14909) This reverts commit 2d98bb3. commit 3129fd0 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sat Aug 10 07:56:55 2019 +0200 SAMD51: Update LCD pins (MarlinFirmware#14907) commit 9479ec3 Author: Ludy <Ludy87@users.noreply.github.com> Date: Sat Aug 10 07:53:26 2019 +0200 Fix Service Menu compile error (MarlinFirmware#14903) commit a7f1021 Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com> Date: Sat Aug 10 00:00:20 2019 +0200 Fix SPI_ENDSTOPS compile error (MarlinFirmware#14906)

Bed calibration Modifed custom scripts Acceleration & speed changes

Optional SDIO clock, fixing printer halt for printers with PWC

Resolve MarlinFirmware#13

github-actions · 2022-04-23T01:28:26Z

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.

bkubicek closed this as completed May 4, 2012

ABH10 mentioned this issue Dec 30, 2017

Update of comments in thermistor table files. No functional changes. #8968

Closed

ktand added a commit to ktand/Marlin that referenced this issue Mar 22, 2020

Bed sensor MarlinFirmware#13 -> MarlinFirmware#1

ef112de

Bed calibration Modifed custom scripts Acceleration & speed changes

fex42 pushed a commit to fex42/Marlin that referenced this issue May 2, 2020

Merge pull request MarlinFirmware#13 from Kokorone/Contribution

dc6d39f

Optional SDIO clock, fixing printer halt for printers with PWC

Christoph-D pushed a commit to Christoph-D/Marlin that referenced this issue Jun 1, 2020

Append building instructions

21eedbd

Resolve MarlinFirmware#13

maz3max pushed a commit to maz3max/Marlin that referenced this issue Aug 24, 2021

Append building instructions

f8a7e2d

Resolve MarlinFirmware#13

github-actions bot locked and limited conversation to collaborators Apr 23, 2022

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Missing steps a lot... #13

Missing steps a lot... #13

hradec commented Nov 21, 2011

bkubicek commented Nov 21, 2011

hradec commented Nov 21, 2011

ErikZalm commented Nov 22, 2011

hradec commented Nov 22, 2011

ErikZalm commented Nov 22, 2011

bkubicek commented Nov 22, 2011

ErikZalm commented Nov 25, 2011

ErikZalm commented Nov 25, 2011

cdaringe commented Dec 21, 2011

ErikZalm commented Dec 21, 2011

cdaringe commented Dec 22, 2011

bkubicek commented Dec 22, 2011

bkubicek commented May 4, 2012

cdaringe commented May 4, 2012

elshad66 commented May 16, 2014

github-actions bot commented Apr 23, 2022

Missing steps a lot... #13

Missing steps a lot... #13

Comments

hradec commented Nov 21, 2011

bkubicek commented Nov 21, 2011

hradec commented Nov 21, 2011

ErikZalm commented Nov 22, 2011

hradec commented Nov 22, 2011

ErikZalm commented Nov 22, 2011

bkubicek commented Nov 22, 2011

ErikZalm commented Nov 25, 2011

ErikZalm commented Nov 25, 2011

cdaringe commented Dec 21, 2011

ErikZalm commented Dec 21, 2011

cdaringe commented Dec 22, 2011

bkubicek commented Dec 22, 2011

bkubicek commented May 4, 2012

cdaringe commented May 4, 2012

elshad66 commented May 16, 2014

github-actions bot commented Apr 23, 2022