Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

STEVAL_3DP001V1: Fix missing file & onboard SD with STM32 soft SPI #16579

Closed
wants to merge 12 commits into from
Closed

STEVAL_3DP001V1: Fix missing file & onboard SD with STM32 soft SPI #16579

wants to merge 12 commits into from

Conversation

Bob-the-Kuhn
Copy link
Contributor

@Bob-the-Kuhn Bob-the-Kuhn commented Jan 15, 2020 •
edited
Loading

Changes:

  1. Add a soft SPI to the STM32 HAL. This will allow accessing the on-board SD cards via SPI on the STM32F4xx and the STM32F7xx boards.
  2. Change the pins_STEVAL_3DP001V1.h file so that the on-board SD card is available (via SPI) when SDSUPPORT is enabled.
  3. Add required file variant.cpp - can't compile without it

This has been tested on a STEVAL_3DP001V1 board.

Also enabling the IWDT module for the STEVAL_3DP001V1 variant.

thinkyhead and others added 9 commits January 3, 2020 19:07
@thinkyhead
Temporary CI fix for STM32, force 3.10700.191028
b375d14
@Vertabreak @thinkyhead
Add example configs. Expand custom menu. (MarlinFirmware#16286)
a9bf86c 
- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12
@Bob-the-Kuhn
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin…
0e89b2e 
… into bugfix-2.0.x
@Bob-the-Kuhn
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin…
c91c181 
… into bugfix-2.0.x
@thinkyhead
Get test configs from GitHub
04cf07f
@Bob-the-Kuhn
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin…
3304a7f 
… into bugfix-2.0.x
@Bob-the-Kuhn
add soft SPI to STM32, add SD card read definitions to STEVAL_3DP001V1
7bd6c3b
@Bob-the-Kuhn
revert unintended changes back to current bugfix-2.0.x
3c57d69
@Bob-the-Kuhn
try 2 to revert back to current bugfix-2.0.x
053661d
@Bob-the-Kuhn Bob-the-Kuhn added PR: Improvement PR: New Feature T: HAL & APIs Topic related to the HAL and internal APIs. A: STM32 labels Jan 15, 2020
@Bob-the-Kuhn
Merge branch 'bugfix-2.0.x' into STM32---add-soft-SPI-so-can-access-o…
aa26362 
…n-board-SD-cards-on-STM32F4xx-and-STM32F7xx-boards
@Bob-the-Kuhn Bob-the-Kuhn mentioned this pull request Jan 15, 2020
Closed
@Bob-the-Kuhn Bob-the-Kuhn changed the title Stm32 - add soft spi, use soft SPI to access STEVAL_3DP001V1's on board sd card STEVAL_3DP001V1 - add missing file & add access to on-board SD card by adding a soft SPI to STM32 HAL Jan 15, 2020
@Bob-the-Kuhn Bob-the-Kuhn mentioned this pull request Jan 16, 2020
Closed
@Bob-the-Kuhn
Copy link
Contributor Author

Bob-the-Kuhn commented Jan 16, 2020 •
edited
Loading

@fradaxx found a bug in the M906 command.

Changes:

  • Changed the overview to state that for a L6474 it sets the TVAL current (4A max) and on the others it sets the KVAL_HOLD register (0-255) and removed non-applicable items.
  • Changed the L6470_SET_KVAL_HOLD macro to set the TVAL current if the stepper is a L6474
  • Changed the value used from byte to int
  • Corrected the Vs_compensation formatting on the L6474 to match the other L64xx types.

@thinkyhead thinkyhead changed the title STEVAL_3DP001V1 - add missing file & add access to on-board SD card by adding a soft SPI to STM32 HAL STEVAL_3DP001V1: Fix missing file & onboard SD with STM32 soft SPI Jan 17, 2020
@thinkyhead
Copy link
Member

@Bob-the-Kuhn — Is there a "Allow edits by maintainers" checkbox on the right side of this page when you view it? If so, could you check that box? I'm not sure why, but lately new PRs are non-editable by default.

thinkyhead pushed a commit that referenced this pull request Jan 17, 2020
@Bob-the-Kuhn @thinkyhead
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (#16579)
187f4f6
@thinkyhead
Copy link
Member

Nothing too tricky here, so I merged it directly. Closing.

@thinkyhead thinkyhead closed this Jan 17, 2020
@Bob-the-Kuhn
Copy link
Contributor Author

Bob-the-Kuhn commented Jan 17, 2020 •
edited
Loading

Please don't merge this PR yet. I may have another feature to add.

Too late.

If this materializes then I'll do another PR.

thinkyhead pushed a commit that referenced this pull request Jan 17, 2020
@Bob-the-Kuhn @thinkyhead
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (#16579)
0d0dfba
mjparme added a commit to mjparme/Marlin that referenced this pull request Feb 1, 2020
@mjparme @thinkyhead
@tpruvot @sjasonsmith @luc-github @thisiskeithb @FLYmaker @randellhodges @ferengi82 @shitcreek @petrzjunior @InsanityAutomation @GMagician @dok-net @pmjdebruijn @Bob-the-Kuhn @jmz52 @swilkens @LinoBarreca @rado79 @Acenotass @ellensp @photodude @mycosd @GerogeFu @Vertabreak @greppp @vector76 @Jzooor @ManuelMcLure @0r31 @Fenixin @meponderR @mbm60 @FlyingSamson @V1EngineeringInc @BigWhale @gjdodd @soligen2010 @felixstorm-c4a8 @vivian-ng @tompe-proj @maukcc @Allted @petrzmax @yangwenxiong @rmoravcik @robbycandra @Hans007a @TheNeskik @exilaus @radex @chgi @StoneColdCrazy @rebel1
Bugfix 2.0.x (#1)
a83104d 
* Don't test certain changes

* Reset runout.ran_out on resume (MarlinFirmware#16230)

* Step timing cleanup and rounding fix (MarlinFirmware#16258)

* Add MRR_ESPA/_ESPE (ESP32) boards (MarlinFirmware#16238)

* Add Ender-5 Pro config (MarlinFirmware#16221)

* Add FLYBOARD (STM32F407ZG) (MarlinFirmware#16257)

* Fix STM32 flush of TX (used by UBL) (MarlinFirmware#16197)

* Flash leveling (for some STM32) (MarlinFirmware#16174)

* Some ESP32 patches (MarlinFirmware#16297)

* MKS SGen-L pins EEBF or EFBF scheme (MarlinFirmware#16296)

* Add Rumba32 support for PIO (MarlinFirmware#16202)

* MKS Robin 2 (STM32F407ZE) base support (MarlinFirmware#16270)

* Update Czech language (MarlinFirmware#16305)

* Sync SKR E3 configs (MarlinFirmware#16301)

* Add NOZZLE_AS_PROBE (no probe offsets) (MarlinFirmware#15929)

* Update README with status badge, etc.

* Split up HAL items

* Update mfpub for current MarlinDocumentation

* Fix Max7219 with 256 or more cels

* Fix games menu back item, titles

* Update comments re: NOZZLE_AS_PROBE

* Fix min limit for acc, feed, jerk (MarlinFirmware#16416)

* Improve Renkforce configs (MarlinFirmware#16417)

* Permit ENDSTOP_INTERRUPTS_FEATURE on more STM32 (MarlinFirmware#16412)

* Improve STEVAL_3DP001V1 and future STEVAL_* support (MarlinFirmware#16404)

* MKS Robin ILI9328 TFT support (MarlinFirmware#16401)

* Disable PIDTEMPBED for SKR Mini E3 (MarlinFirmware#16396)

* Return from loop() on non-AVR boards (MarlinFirmware#16390)

* Refactor TMC-related macros and sanity checks (MarlinFirmware#16384)

* Add FILAMENT_UNLOAD_PURGE_FEEDRATE (MarlinFirmware#16372)

* Fix some DOGM warnings (MarlinFirmware#16363)

* Fix warnings in stepper.cpp (MarlinFirmware#16364)

* Fix PrintrBoard build (ignore TMC libraries) (MarlinFirmware#16346)

(In future try to get Teensy processors better supported by `TMCStepper`.)

* Clean up trailing whitespace

* PWM pin not needed for Neopixel brightness / submenu (MarlinFirmware#16345)

* Misc patches preceding DGUS PR

* Fix Visual Micro "Arduino IDE for Visual Studio" support (MarlinFirmware#16418)

* Update Russian language (MarlinFirmware#16426)

* STM32F1: Fix misleading indent / nullptr on FSMC (MarlinFirmware#16431)

* Z-offset edit precision based on value limits (MarlinFirmware#16425)

* Add Ender-5 leadscrew README (MarlinFirmware#16424)

* Add motherboard BIGTREE_SKR_V1.4_TURBO  (MarlinFirmware#16374)

* Enable MULTI_NOZZLE_DUPLICATION for BIBO (MarlinFirmware#16435)

* Touch UI: Fix UBL mesh value editing (MarlinFirmware#16432)

* Sidewinder X1 Config Updates (MarlinFirmware#16315)

* Add Leapfrog Xeed 2015 support (MarlinFirmware#16400)

* Improve JGAurora A1/A5S touch buttons (MarlinFirmware#16394)

* Standardize drivers.h values, add class indirection (MarlinFirmware#16448)

* Update Russian language (MarlinFirmware#16440)

* BTT002: Add runout, PLR, and RGB pins (MarlinFirmware#16442)

* Pins debugging AVR serial pins (MarlinFirmware#16437)

* Fix MIN_PROBE_EDGE bug in default ABL G29 (MarlinFirmware#16367)

* Temporary CI fix for STM32

* Use a default monitor_speed of 250000

* MSG_WATCH => MSG_INFO_SCREEN

* Add EVNOVO (Artillery) Genius config (MarlinFirmware#16320)

* Fixed Creality CR-20 Pro configuration example (MarlinFirmware#16332)

* FYSETC F6 v1.4 board support (MarlinFirmware#16321)

* Add example configs. Expand custom menu. (MarlinFirmware#16286)

- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12

* Fix Ender-2 display pins, add BTN_ENC (MarlinFirmware#16349)

* Update and fix DGUS (MarlinFirmware#16317)

* Fix serials available on SKR Pro 1.1 (MarlinFirmware#16439)

* Fix daily date bump action

* Action to check PRs

* Update maintainer funding links

* Skip build tests on forks

* Update git helper usage

* Fix EEPROM error with EXTRUDERS == 0 (MarlinFirmware#16464)

* Fix M115 cap with EXTRUDERS == 0 (MarlinFirmware#16459)

* Add option to invert joystick axes (MarlinFirmware#16466)

* Update Russian language (MarlinFirmware#16461)

* Fix permyriad progress bar (MarlinFirmware#16460)

* Improve French language (UBL) (MarlinFirmware#16453)

* Followup to EEPROM patch (MarlinFirmware#16470)

* Remove extra UBL map edit menu item (MarlinFirmware#16451)

* Fix unused var warning (MarlinFirmware#16467)

* Update U20 config to help UBL toggle (MarlinFirmware#16471)

* Move auto_build.py to 'vscode' folder

* Fix MKS_SGEN sanity check (MarlinFirmware#16501)

* Fix EEPROM array size bug (MarlinFirmware#16475)

* Fix SKR Pro BLTouch conflicting timers (MarlinFirmware#16499)

* Provide some missing Arduino macros (MarlinFirmware#16497)

* Fix Change Filament menu item with runout (MarlinFirmware#16485)

* Fix LCD for Tevo Tornado (MarlinFirmware#16474)

* Update workflow skip condition

* Add menu item Tune > Advance K (MarlinFirmware#16488)

* Extend SERIAL_CHAR to take multiple arguments

* Code style and comment tweaks

* Correct ESP32 CPU speed in README (MarlinFirmware#16472)

* Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs (MarlinFirmware#16510)

* Fix compile error w/out LCD (MarlinFirmware#16502)

* Add Probe Offsets menu (MarlinFirmware#16444)

* Fix Probe Offset XY edit items (et Français) (MarlinFirmware#16523)

* Update Russian language (MarlinFirmware#16522)

* [cron] Bump distribution date (2020-01-10)

* Prevent Z misaligment on tool change (MarlinFirmware#16518)

* Update Italian language (MarlinFirmware#16527)

* ESP3d integration for ESP32 (MarlinFirmware#16515)

* [cron] Bump distribution date (2020-01-11)

* Migrate actions to default (2.0.x) branch

* Only constrain motion on homed axes (MarlinFirmware#16533)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

* Fix probeless delta build (MarlinFirmware#16537)

* Use RECIPROCAL macro (not _RECIP) (MarlinFirmware#16530)

* [cron] Bump distribution date (2020-01-12)

* Restore test_builds action to bugfix

* Update auto_build.py paths for Atom/Sublime

* [cron] Bump distribution date (2020-01-13)

* Add GTM32 (STM32F103VET6) environment (MarlinFirmware#16454)

* Power options formatting

* Geeetech G2Pro configuration (MarlinFirmware#16553)

* Fix Linux upload path detection (MarlinFirmware#16514)

* Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support (MarlinFirmware#16538)

* Clean up whitespace

* [cron] Bump distribution date (2020-01-14)

* Improved STMicro L64XX stepper driver support (MarlinFirmware#16452)

* Make lcd_power_loss_recovery_cancel exportable

* Fix PLR cancel with ExtUI (MarlinFirmware#16556)

* Bring MP_SCARA config up to date

* Fix Fysetc S6 FLASH_PAGE_SIZE and test build (MarlinFirmware#16560)

* [cron] Bump distribution date (2020-01-15)

* Update more configs

* Move configurations to a separate repo

* Fix build error with unsupported reset flags (MarlinFirmware#16562)

* Steval_3DP001V1 timers, analog inputs, etc. (MarlinFirmware#16565)

* Use Flash EEPROM on BTT002 (MarlinFirmware#16558)

* Get test configs from GitHub

* Fix typo

* Nikon IR support for time lapse photos (MarlinFirmware#16539)

* Adjustable ADC debounce delay (MarlinFirmware#16264)

* [cron] Bump distribution date (2020-01-16)

* STM32 RODATA LENGTH (MarlinFirmware#16580)

* Fix I2C address of MCP4728 on LPC176x (MarlinFirmware#16578)

* Fix GTM32 environment (to prevent a crash)

* Fix some warnings, Melzi pins

* Move macros to stepper/indirection

* Fix TOUCH_UI_FTDI_EVE bugs (MarlinFirmware#16540)

* ESP32 HAL: Fix random pauses during prints (MarlinFirmware#16548)

* [cron] Bump distribution date (2020-01-17)

* STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. (MarlinFirmware#16579)

* Clean up HAL ADC, old test scripts

* Adjust GTM32 build flags (MarlinFirmware#16582)

* Shared SPI sanity check (MarlinFirmware#16581)

* More CI test updates

* Update FYSETC S6 pins (MarlinFirmware#16559)

* PINDA v2 temperature sensor / compensation (MarlinFirmware#16293)

* [cron] Bump distribution date (2020-01-18)

* Allow RRW Keypad with any LCD

* [cron] Bump distribution date (2020-01-19)

* [cron] Bump distribution date (2020-01-20)

* Fix M112 with Emergency Parser

* Simplify TMC monitor code

* Updates for L64XX

* Function-like macros

* Use bool in pin compare

* Patch for _STEP_INIT

* Simplify a drivers.h macro (MarlinFirmware#16589)

* SAMD51: ADC for probe temperature compensation (MarlinFirmware#16596)

* Update FYSETC S6 Peripheral Pins (MarlinFirmware#16593)

* Update BTT002 pins (MarlinFirmware#16591)

* Reset shutdown timer on M85 (MarlinFirmware#16587)

* AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial (MarlinFirmware#16421)

* STEVAL_3DP001V1: Easier Serial2 (for WIFI interface) (MarlinFirmware#16599)

* Fix Greek language string (MarlinFirmware#16601)

* Quad Z stepper support (MarlinFirmware#16277)

* LPC1768: Allow I2C master channel override (MarlinFirmware#16584)

* Move steps/mm out of slim menus (MarlinFirmware#16603)

* Fix CHAMBER_MAXTEMP security margin (MarlinFirmware#16600)

* L64xx M906 Fix status variable, formatting (MarlinFirmware#16597)

* Provide methods for M420 + MBL (MarlinFirmware#16602)

* [cron] Bump distribution date (2020-01-21)

* Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning (MarlinFirmware#16621)

* Override for LPC1768 u8g/digipot I2C master ID (MarlinFirmware#16622)

* Release UI on G26 priming timeout (MarlinFirmware#16449)

* Add HMS434 V15 ATSAM board (MarlinFirmware#16620)

* Tweak some config spacing

* G12 defaults per tool. Event G-code for post-toolchange (MarlinFirmware#16554)

* Arc segment radius scaling (MarlinFirmware#16551)

* Update mfdoc, mfpub

* [cron] Bump distribution date (2020-01-22)

* Tweak mfpub stashing

* [cron] Bump distribution date (2020-01-23)

* Enable use of latest TMCStepper on MKS Robin Nano (MarlinFirmware#16652)

* [cron] Bump distribution date (2020-01-24)

* Convert chars only for enabled languages

* Extra debugging for leveling on/off

* Bring configs and drivers.h up to date

* Duet Smart Effector support (MarlinFirmware#16641)

* BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans (MarlinFirmware#16595)

* [cron] Bump distribution date (2020-01-26)

* Fix DELTA_CALIBRATION_MENU recursive call (MarlinFirmware#16656)

* Fix MKS Base + Digipot compile error (MarlinFirmware#16636)

* Add ESP3DLib idletask entry point (MarlinFirmware#16658)

* Fix Serial defines for M43 on AVR (MarlinFirmware#16649)

* Fix HOMING_BACKOFF_MM for DELTA (MarlinFirmware#16657)

* Clean up PID language defines

* More 8 extruder defines

* Update Slovak language (MarlinFirmware#16646)

* Fix M43 timer report on AVR (MarlinFirmware#16645)

* Fix Spanish (swapped BLTouch strings) (MarlinFirmware#16637)

* SKR 1.3 sensorless endstops hack (MarlinFirmware#16659)

* Fix PID F menu label

* [cron] Bump distribution date (2020-01-27)

* Preserve CWD for write/remove file (MarlinFirmware#16667)

* Rename some temperature members

* Fix Trigorilla 1.4 limit switches

See MarlinFirmware#16612

* Fix serial port redirection (index ≠ port num) (MarlinFirmware#16687)

* G60/G61 Position Save/Restore (MarlinFirmware#16557)

* Remove extraneous G60/G61 lines

* Fix Manual Bed Leveling with multiple extruders (MarlinFirmware#16688)

* [cron] Bump distribution date (2020-01-28)

* Prevent SD access from resetting ESP32 (MarlinFirmware#16690)

* [cron] Bump distribution date (2020-01-29)

* Fix Toolchange (!no_move) return to status (MarlinFirmware#16699)

* [cron] Bump distribution date (2020-01-30)

* Cleanup of old includes, add comments

* Fix HAS_FAN macro (MarlinFirmware#16717)

* Fix probe temp calibration (MarlinFirmware#16718)

* Support for E4d@BOX mainboard (MarlinFirmware#16716)

* Fix missing string for M48 build (MarlinFirmware#16708)

* Fix G60/G61 slots > 8 and compile error (MarlinFirmware#16715)

* Move L64XX index_to_axis to progmem (MarlinFirmware#16697)

* Refactor heater watch, job timer auto-start (MarlinFirmware#16725)

* Auto assign DIAG pins for multi-endstop (MarlinFirmware#16723)

* Tweak G60/G61 slots

* Fix compile error in SdVolume on ESP32 (MarlinFirmware#16728)

* Simultaneous use of rotary encoder and touch buttons (MarlinFirmware#16729)

* Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo (MarlinFirmware#16727)

* Extend RX/TX pins for up to 8 extruders

* Fix up, improve endstop pin auto-assignment

Followup for MarlinFirmware#16723

* (21) PT100 for MCUs with 3.3v logic (MarlinFirmware#16731)

* [cron] Bump distribution date (2020-01-31)

* Add sanity-check for new Advanced Pause option

Followup to MarlinFirmware#16372

* Include macros for delta ABC

* Update Russian language (MarlinFirmware#16745)

* Fix BTT SKR 1.4 extra endstop pins (MarlinFirmware#16738)

* Option for Trigorilla 1.4 with add-on endstops board (MarlinFirmware#16737)

* Consistent M112 with Emergency Parser (MarlinFirmware#16747)

* Improve mfadd helper script

- Use the original branch name if none is supplied
- Set the remote tracking to the source
- Accept User/Branch or User:Branch syntax

* Clean up i2c encoder, sanitize serial

* Misc cleanup, whitespace

* Encapsulate probe as singleton class (MarlinFirmware#16751)

* G34 automatic point assignment (MarlinFirmware#16473)

* Fix Temperature::over_autostart_threshold (MarlinFirmware#16749)

* Update Russian language (MarlinFirmware#16750)

* Fix CURRENT_STEP_DOWN compile error

* Drop obsolete SD special char handling

See MarlinFirmware#14035

* Probe singleton patch

Followup to MarlinFirmware#16751

* Fix RGB / Neopixel white color bug

See MarlinFirmware#16752

* Suppress a compile warning

* More 8-extruder fixups

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Luc <8822552+luc-github@users.noreply.github.com>
Co-authored-by: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Co-authored-by: FLYmaker <49380822+FLYmaker@users.noreply.github.com>
Co-authored-by: randellhodges <rhodges@taxfodder.com>
Co-authored-by: ferengi82 <christian.maurer@gmx.eu>
Co-authored-by: Luu Lac <45380455+shitcreek@users.noreply.github.com>
Co-authored-by: petrzjunior <junior@zahradnik.cz>
Co-authored-by: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Co-authored-by: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Co-authored-by: Dirk O. Kaar <19971886+dok-net@users.noreply.github.com>
Co-authored-by: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Co-authored-by: Bob Kuhn <bob.kuhn@att.net>
Co-authored-by: Alexander Gavrilenko <jmz52@users.noreply.github.com>
Co-authored-by: swilkens <stefanwilkens@gmail.com>
Co-authored-by: Lino Barreca <linobarreca@hotmail.com>
Co-authored-by: rado79 <51396577+rado79@users.noreply.github.com>
Co-authored-by: Acenotass <44540957+Acenotass@users.noreply.github.com>
Co-authored-by: ellensp <ellensp@hotmail.com>
Co-authored-by: Walt Sorensen <photodude@users.noreply.github.com>
Co-authored-by: yedey <myco@gmx.net>
Co-authored-by: George Fu <nailao_5918@163.com>
Co-authored-by: Vertabreaker <opyrus@hotmail.com>
Co-authored-by: greppp <gregory.perrin87@gmail.com>
Co-authored-by: Jamie <vector76@users.noreply.github.com>
Co-authored-by: Justin <justinwilczek@gmail.com>
Co-authored-by: ManuelMcLure <manuel@mclure.org>
Co-authored-by: 0r31 <37673727+0r31@users.noreply.github.com>
Co-authored-by: Alejandro Aguilera <fenixin@gmail.com>
Co-authored-by: meponderR <33591888+meponderR@users.noreply.github.com>
Co-authored-by: Mehdi Beyk Mohamadi <mbm_greenway@yahoo.com>
Co-authored-by: FlyingSamson <59110786+FlyingSamson@users.noreply.github.com>
Co-authored-by: Ryan V1 <55478432+V1EngineeringInc@users.noreply.github.com>
Co-authored-by: David Klasinc <bigwhale@lubica.net>
Co-authored-by: gjdodd <31553294+gjdodd@users.noreply.github.com>
Co-authored-by: Dennis <16547088+soligen2010@users.noreply.github.com>
Co-authored-by: felixstorm <felix.storm@glueckkanja.com>
Co-authored-by: vivian-ng <vivian@maplerain.com>
Co-authored-by: tompe-proj <59094873+tompe-proj@users.noreply.github.com>
Co-authored-by: MaukCC <jos@mauk.cc>
Co-authored-by: Ryan <allted@gmail.com>
Co-authored-by: Artur Petrzak <petrzmax@gmail.com>
Co-authored-by: yangwenxiong <46896566+yangwenxiong@users.noreply.github.com>
Co-authored-by: Roman Moravčík <roman.moravcik@gmail.com>
Co-authored-by: Robby Candra <robbycandra.mail@gmail.com>
Co-authored-by: Hans007a <32525735+Hans007a@users.noreply.github.com>
Co-authored-by: Neskik <axel.gouverneur@gmail.com>
Co-authored-by: Mauro <exilaus@hotmail.com>
Co-authored-by: Radek Pietruszewski <radexpl@gmail.com>
Co-authored-by: chgi <chgi@users.noreply.github.com>
Co-authored-by: Robert Stein <stonecoldcrazy@stoneathome.de>
Co-authored-by: rebel1 <453277+rebel1@users.noreply.github.com>
@thinkyhead thinkyhead mentioned this pull request Feb 6, 2020
Closed
6 tasks
@Bob-the-Kuhn Bob-the-Kuhn deleted the STM32---add-soft-SPI-so-can-access-on-board-SD-cards-on-STM32F4xx-and-STM32F7xx-boards branch June 8, 2020 16:46
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
A: STM32 PR: Bug Fix PR: Improvement PR: New Feature T: HAL & APIs Topic related to the HAL and internal APIs.
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
3 participants
@Bob-the-Kuhn @thinkyhead @Vertabreak