Skip to content

Storage Configuration

Jump to bottom
Mason J. Katz edited this page Dec 15, 2015 · 1 revision

Stacki manages storage at both the Partition level and the hardware RAID Controller level.

Partition

Spreadsheet

The configuration of disk partitions can be specified in a spreadsheet with the following columns:

  1. Name. A host name, appliance type or global.
  2. Device. The Linux disk device name (e.g., sda, sdb).
  3. Mountpoint. Where the partition should be mounted on the file system.
  4. Size. The size of the partition in megabytes.
  5. Type. How the partition should be formatted (e.g., xfs, swap).
  6. Options. Free form string of options that can be used to create a partition.

A sample spreadsheet is shown below.

The Name column can contain a specific host name (e.g., backend-0-0), an Appliance type (e.g., backend) or it can be set to global.

In the sample spreadsheet, we see the default configuration (global) is to only configure the partitions for the first disk (sda). The root partition / is an ext4 partition and it is 50 GB. The /var partition is an ext4 partition and it is 80 GB. The swap partition is 16 GB. Lastly, /scratch is an xfs partition and it will be the remainder of sda.

The configuration for backend-0-0 has a similar configuration for sda as the global configuration except for the /scratch partition. The maximum size of /scratch partition is set to 1 GB via the Options column. Additionally, sdb and sdc will be configured for backend-0-0 as single partitions that span the entire disk.

LVM

Stacki 2.0 supports specifying LVM configuration via a spreadsheet. lvm, volgroup are keywords that indicate that the partition needs to be setup via LVM. In the configuration for backend-0-1, pv.01 is configured as a physical volume on sdb with size as 8GB. volgrp01 is a volgroup comprising of pv.01. /extra is mounted as an lvm partition on volgroup volgrp01.

When you are finished editing your spreadsheet, save it as a CSV file, then copy the CSV file to your frontend. Then, load the CSV file into the database on the frontend by executing:

# stack load storage partition file=partition.csv

You can view your storage partition configuration by executing:

# stack list storage partition

The nukedisks Attribute

A host's disk partitions will only be reconfigured if the nukedisks attribute is set to true. On first install, all installing backend disks automatically have nukedisks set to false. If you've added backend nodes via spreadsheet, you must set nukedisks to true as in the example below, before installing.

As an example, to set the nukedisks attribute for host backend-0-0, execute:

# stack set host attr backend-0-0 attr=nukedisks value=true

Then, the next time backend-0-0 is installed, it will remove all partitions for all disks, then repartition the disks as you specified in your spreadsheet.

While a host is installing, after it partitions its disks, it will send a message to the frontend to instruct it to set the nukedisks attribute back to false. This ensures that the disks will not be reconfigured on the next installation.

RAID Controller

Stacki can automatically configure two types of hardware RAID controllers:

  1. LSI MegaRAID
  2. HP Smart Array

Spreadsheet

The configuration of disk controllers can be specified in a spreadsheet with the following columns:

  1. Name. A host name, appliance type or global.
  2. Slot. The slot of a specific disk in the array.
  3. Raid Level. The RAID level for the disks. This can be 0, 1, 10, 5, 6, 50, 60.
  4. Array Id. The order in which the RAID groups will be constructed.
  5. Options. Any additional options to be passed on to the storcli or hpssacli command.

A sample spreadsheet is shown below.

The Name column can contain a specific host name (e.g., backend-hp-0-2), an appliance type (e.g., backend) or it can be set to global.

  1. In the sample spreadsheet, the default configuration is global

    1. The first logical disk (the Linux kernel will see this as sda) is a RAID 1 mirror composed of the disks in slot 0 and 1
    2. The remaining disks (the disks in slots 2 and up) will be configured as individual RAID 0 disks. This is analogous to setting up the controller in JBOD mode. We specify this with the wildcard symbol "*" for the Slot and Array Id cells. Wildcards are useful when your backend hosts have different number of disks drives.

  2. The next configuration is for all backend hosts.

    1. The first logical disk (sda) will be a RAID 1 and it will be constructed with the disk in slot 5 and the disk in slot 15.
    2. The second logical disk (sdb) will be a RAID 5 composed of the disks in slots 0 through 4.
    3. The third logical disk (sdc) will be a RAID 5 composed of the disks in slots 16 through 21.
    4. The fourth logical disk (sdd) will be a RAID 6 composed of the disks in slots 6 through 12 and the disks in slots 13 and 14 will be hot spares associated with only this array.
    5. The disks in slots 22 and 23 are designated as hot spares that can be used as replacements for any failed drive in any array.

  3. The third configuration is for the host named backend-hp-0-2.

    1. The first logical disk (sda) is a RAID 10 set composed of disks 1 through 4.
    2. The second logical disk(sdb) is a RAID 1 set composed of disks 5 and 6 with a size of 232 GB.
    3. The third logical disk(sdc) is a RAID 1 set, also composed of disks 5 and 6, using up the remainder of the disks.
    4. The remaining disks (the disks in slots 7 and up) will be configured as individual RAID 0 disks.

The last configuration (for host backend-hp-0-2) is considered advanced configuration. This is due to slots 5 and 6 being listed multiple times in the spreadsheet.

When you are finished editing your spreadsheet, save it as a CSV file, then copy the CSV file to your frontend. Then, load the CSV file into the database on the frontend by executing

# stack load storage controller file=controller.csv

If the controller spreadsheet contains advanced configuration (as demonstrated by the configuration for backend-hp-0-2), the force=y argument will need to be appended to the above command

# stack load storage controller file=controller.csv force=y

You can view your storage controller configuration by executing:

# stack list storage controller

The nukecontroller attribute

A host's hardware RAID controller will only be reconfigured if the nukecontroller attribute is set to true. As an example, to set the nukecontroller attribute for host backend-0-0, execute:

# stack set host attr backend-0-0 attr=nukecontroller value=true

Then, the next time backend-0-0 is installed, it will remove the current hardware RAID controller configuration, then configure it as you specified in your spreadsheet.

Like the nukedisks attribute, nukecontroller is set to false on the initial installation of a backend node. If the RAID controller has been configured by hand with a keyboard and monitor, that configuration is safe unless the nukecontroller attribute is set to true.

After the host has completed installation, nukecontroller attribute for that host is reset to false.

This ensures that the controller will not be reconfigured on the next installation.

Content

Clone this wiki locally