Add examples with tiny RISCV

apycula/tiled_fuzzer.py

@@ -102,7 +102,7 @@ def tbrl2rc(fse, side, num):
 
 # Read the packer vendor log to identify problem with primitives/attributes
 # returns dictionary {(primitive name, error code) : [full error text]}
-_err_parser = re.compile("(\w+) +\(([\w\d]+)\).*'(inst[^\']+)\'.*")
+_err_parser = re.compile(r"(\w+) +\(([\w\d]+)\).*'(inst[^\']+)\'.*")
 def read_err_log(fname):
     errs = {}
     with open(fname, 'r') as f:

examples/himbaechel/Makefile.himbaechel

@@ -12,6 +12,7 @@ all: \
 	bsram-pROM-tangnano20k.fs bsram-SDPB-tangnano20k.fs bsram-SP-tangnano20k.fs \
 	bsram-DPB-tangnano20k.fs bsram-pROMX9-tangnano20k.fs bsram-SDPX9B-tangnano20k.fs \
 	bsram-SPX9-tangnano20k.fs bsram-DPX9B-tangnano20k.fs \
+	femto-riscv-15-tangnano20k.fs femto-riscv-16-tangnano20k.fs femto-riscv-16-tangnano20k.fs \
 	\
 	blinky-primer20k.fs shift-primer20k.fs blinky-tbuf-primer20k.fs blinky-oddr-primer20k.fs \
 	blinky-osc-primer20k.fs tlvds-primer20k.fs elvds-primer20k.fs oddr-tlvds-primer20k.fs \
@@ -45,6 +46,7 @@ all: \
 	ides16-tangnano4k.fs \
 	ides4-tangnano4k.fs ivideo-tangnano4k.fs ides8-tangnano4k.fs ides10-tangnano4k.fs \
 	oser10-tlvds-tangnano4k.fs \
+	femto-riscv-15-tangnano4k.fs femto-riscv-16-tangnano4k.fs femto-riscv-16-tangnano4k.fs \
 	\
 	blinky-tangnano9k.fs shift-tangnano9k.fs blinky-tbuf-tangnano9k.fs blinky-oddr-tangnano9k.fs \
 	blinky-osc-tangnano9k.fs tlvds-tangnano9k.fs elvds-tangnano9k.fs oddr-tlvds-tangnano9k.fs \
@@ -55,6 +57,7 @@ all: \
 	bsram-DPB-tangnano9k.fs bsram-pROMX9-tangnano9k.fs bsram-SDPX9B-tangnano9k.fs \
 	bsram-SPX9-tangnano9k.fs bsram-DPX9B-tangnano9k.fs \
 	oser10-elvds-tangnano9k.fs \
+	femto-riscv-15-tangnano9k.fs femto-riscv-16-tangnano9k.fs femto-riscv-18-tangnano9k.fs \
 	\
 	blinky-szfpga.fs shift-szfpga.fs blinky-tbuf-szfpga.fs blinky-oddr-szfpga.fs \
 	blinky-osc-szfpga.fs tlvds-szfpga.fs elvds-szfpga.fs oddr-tlvds-szfpga.fs \
@@ -185,7 +188,7 @@ clean:
 	$(NEXTPNR) --json $< --write $@ --device GW2AR-LV18QN88C8/I7 --vopt family=GW2A-18C --vopt cst=tangnano20k.cst
 
 %-tangnano20k-synth.json: %.v
-	$(YOSYS) -D LEDS_NR=6 -D OSC_TYPE_OSC -D INV_BTN=1 -p "read_verilog $^; synth_gowin -json $@"
+	$(YOSYS) -D LEDS_NR=6 -D OSC_TYPE_OSC -D INV_BTN=1 -D CPU_FREQ=27 -D BAUD_RATE=115200 -p "read_verilog $^; synth_gowin -json $@"
 
 pll-nanolcd-tangnano20k-synth.json: pll/GW2A-18-dyn.vh pll-nanolcd/TOP.v pll-nanolcd/VGAMod.v
 	$(YOSYS) -D INV_BTN=1 -p "read_verilog $^; synth_gowin -json $@"
@@ -262,7 +265,7 @@ bsram-%-tangnano1k-synth.json: pll/GW1NZ-1-dyn.vh %-image-rom.v %-video-ram.v %.
 	$(NEXTPNR) --json $< --write $@ --device GW1NSR-LV4CQN48PC7/I6 --vopt cst=tangnano4k.cst
 
 %-tangnano4k-synth.json: %.v
-	$(YOSYS) -D LEDS_NR=6 -D OSC_TYPE_OSCZ -D INV_BTN=0 -p "read_verilog $^; synth_gowin -json $@"
+	$(YOSYS) -D LEDS_NR=6 -D OSC_TYPE_OSCZ -D INV_BTN=0 -D FORCE_BRAM -D CPU_FREQ=27 -D BAUD_RATE=115200 -p "read_verilog $^; synth_gowin -json $@"
 
 blinky-pll-tangnano4k-synth.json: pll/GW1NS-4-dyn.vh blinky-pll-vr.v
 	$(YOSYS) -D INV_BTN=0 -D LEDS_NR=6 -p "read_verilog $^; synth_gowin -json $@"
@@ -276,7 +279,7 @@ blinky-pll-tangnano4k-synth.json: pll/GW1NS-4-dyn.vh blinky-pll-vr.v
 	$(NEXTPNR) --json $< --write $@ --device GW1NR-LV9QN88PC6/I5 --vopt family=GW1N-9C --vopt cst=tangnano9k.cst
 
 %-tangnano9k-synth.json: %.v
-	$(YOSYS) -D LEDS_NR=6 -D OSC_TYPE_OSC -D INV_BTN=0 -p "read_verilog $^; synth_gowin -json $@"
+	$(YOSYS) -D LEDS_NR=6 -D OSC_TYPE_OSC -D INV_BTN=0 -D CPU_FREQ=27 -D BAUD_RATE=115200 -p "read_verilog $^; synth_gowin -json $@"
 
 pll-nanolcd-tangnano9k-synth.json: pll/GW1N-9C-dyn.vh pll-nanolcd/TOP.v pll-nanolcd/VGAMod.v
 	$(YOSYS) -D INV_BTN=0 -p "read_verilog $^; synth_gowin -json $@"

examples/himbaechel/clockworks.v

@@ -0,0 +1,55 @@
+ /*
+ * Copyright (c) 2020, Bruno Levy
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+`default_nettype none
+
+module Clockworks (
+	input  wire CLK,
+	input  wire RESET,
+	output wire clk,
+	output wire resetn
+);
+	parameter SLOW = 0;
+
+	assign resetn = RESET ^ `INV_BTN;
+	generate
+		if (SLOW != 0) begin
+			localparam slow_bits = SLOW;
+
+			reg [SLOW:0] slow_CLK = 0;
+			always @(posedge CLK) begin
+				slow_CLK <= slow_CLK + 1;
+			end
+			assign clk = slow_CLK[slow_bits];
+		end else begin
+			assign clk = CLK;
+		end
+	endgenerate
+endmodule
+

examples/himbaechel/emitter_uart.v

@@ -0,0 +1,72 @@
+ /*
+ * Copyright (c) 2020, Bruno Levy
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ * 
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+module corescore_emitter_uart
+  #(
+    parameter clk_freq_hz = 0,
+    parameter baud_rate = 57600)
+  (
+   input wire 	    i_clk,
+   input wire 	    i_rst,
+   input wire [7:0] i_data,
+   input wire 	    i_valid,
+   output reg 	    o_ready,
+   output wire 	    o_uart_tx
+);
+
+   localparam START_VALUE = clk_freq_hz/baud_rate;
+
+   localparam WIDTH = $clog2(START_VALUE);
+
+   reg [WIDTH:0]  cnt = 0;
+
+   reg [9:0] 	    data;
+
+   assign o_uart_tx = data[0] | !(|data);
+
+   always @(posedge i_clk) begin
+      if (cnt[WIDTH] & !(|data)) begin
+	 o_ready <= 1'b1;
+      end else if (i_valid & o_ready) begin
+	 o_ready <= 1'b0;
+      end
+
+      if (o_ready | cnt[WIDTH])
+	cnt <= {1'b0,START_VALUE[WIDTH-1:0]};
+      else
+	cnt <= cnt-1;
+
+      if (cnt[WIDTH])
+	data <= {1'b0, data[9:1]};
+      else if (i_valid & o_ready)
+	data <= {1'b1, i_data, 1'b0};
+   end
+
+endmodule
+