RuntimeEngine

The run-time engine

The engine (also called the "interpreter") is what runs your game and is what the player will use.

Configuration file locations

For historical reasons the configuration file should be called acsetup.cfg.

The engine supports three configuration files that are read in the following order, every next overriding values from the previous one:

Default config file, found in the game's installation directory, applied for the game loaded from that directory;
Current user's global config file, applied for any AGS game.
Current user's game config file, applied only for the game of particular title. This config file is also the one supposed to be written to when the engine or setup application modifies game configuration.

Locations of two latter files differ between running platforms:

Linux:
- user's global config: $XDG_DATA_HOME/ags/acsetup.cfg
- user's game config: $XDG_DATA_HOME/ags/GAMENAME/acsetup.cfg
- NOTE: if $XDG_DATA_HOME is not defined, then $HOME/.local/share is used instead.
Windows:
- user's global config: %USERPROFILE%/Saved Games/Adventure Game Studio/acsetup.cfg
- user's game config: %USERPROFILE%/Saved Games/GAMENAME/acsetup.cfg

Configuration file options

[graphics] - display mode and various graphics options
- driver = [string] - id of the graphics renderer to use. Supported names are:
  - D3D9 - Direct3D9 (MS Windows version only);
  - OGL - OpenGL;
  - Software - software renderer.
- software_driver = [string] - optional id of the SDL2 driver to use for the final output in software mode, leave empty for default. IDs are provided by SDL2, not all of these will work on any system:
  - direct3d, opengl, opengles, opengles2, metal, software.
- windowed = [0; 1] - when enabled, runs game in windowed mode.
- screen_def = [string] - determines how display mode is deduced:
  - explicit - use screen_width and screen_height parameters;
  - scaling - sets display mode equal to scaled game size;
  - max - sets display mode equal to device/desktop size.
- screen_width = [integer] - if screen_def is 'explicit', defines display mode width; otherwise ignored.
- screen_height = [integer] - if screen_def is 'explicit', defines display mode height; otherwise ignored.
- match_device_ratio = [0; 1] - when looking for appropriate fullscreen mode, prioritize ones which have the same aspect ratio as the current device/desktop mode.
- game_scale_fs = [string | integer] - game scaling rule for fullscreen mode, and...
- game_scale_win = [string | integer] - game scaling rule for windowed mode, where
  - any integer number - a positive number acts as upscale multiplier, a negative number acts as downscale divisor;
  - max_round - deduce the maximal integer multiplier that fits into the current desktop/device size;
  - stretch - stretch to current desktop/device size;
  - proportional - similar to stretch, but keep the game's aspect ratio.
- filter = [string] - id of the scaling filter to use. Supported filter names are:
  - none - run in native game size;
  - stdscale - nearest-neighbour scaling;
  - linear - anti-aliased scaling; only usable with hardware-accelerated renderer.
- refresh = [integer] - refresh rate for the display mode.
- render_at_screenres = [0; 1] - whether the sprites are transformed and rendered in native game's or current display resolution;
- supersampling = [integer] - super-sampling multiplier, default is 1, used with render_at_screenres = 0 (currently supported only by OpenGL renderer);
- vsync = [0; 1] - enable or disable vertical sync.
- rotation = [string | integer] - screen rotation. Possible values are:
  - unlocked (0) - device can be freely rotated if possible.
  - portrait (1) - locks the screen in portrait orientation.
  - landscape (2) - locks the screen in landscape orientation.
[sound] - sound options
- enabled = [0; 1] - enable or disable game audio.
- driver = [string] - audio driver id, leave empty for default. Driver IDs are provided by SDL2 and are platform-dependent.
  - For Linux:
    - pulseaudio, alsa, arts, esd, jack, pipewire, disk, dsp, dummy
  - For Windows:
    - wasapi, directsound, winmm, disk, dummy
- cache_size = [integer] - size of the engine's sound cache, in kilobytes. Default is 32768 (32 MB).
- stream_threshold = [integer] - max size of the sound clip that engine is allowed to load in memory at once, as opposed to continuously streaming one. In the current implementation this also defines the max size of a clip that may be put into the sound cache. Default is 1024 (1 MB).
- usespeech = [0; 1] - enable or disable in-game speech (voice-overs).
[mouse] - mouse options
- auto_lock = [0; 1] - enables mouse autolock in window: mouse cursor locks inside the window whenever it receives input focus.
- control_when = [string] - determines when the mouse cursor speed control is allowed, acceptable values are:
  - never - self-explanatory;
  - fullscreen - only when the game is run in fullscreen (this is default);
  - always - both in fullscreen and windowed mode.
- control_enabled = [0; 1] - enables or disables mouse control. Note that this setting may be overriden by control_when.
- speed_def = [string] - determines how the cursor speed value is interpreted, possible modes are:
  - absolute - use precisely the speed value provided by config;
  - current_display - keep cursor's speed by screen size relation by increasing actual cursor speed when running game in low resolution and decreasing when running in higher than the current user's dekstop resolution (this is default).
- speed = [real] - mouse cursor speed (default is 1.0).
[language] - language options
- translation = [string] - name of the translation to use. A <name>.tra file should be present in the game directory.
[misc] - various options
- datafile = [string] - path to the game file.
- datadir = [string] - path to the game directory.
- localuserconf = [0; 1] - read and write user config in the game's directory rather than using standard system path. Game directory must be writeable for this option to work, otherwise engine will fall back to standard path.
- user_data_dir = [string] - custom path to savedgames location.
- shared_data_dir = [string] - custom path to shared appdata location.
- antialias = [0; 1] - anti-alias scaled sprites.
- cachemax = [integer] - size of the engine's sprite cache, in kilobytes. Default is 131072 (128 MB).
- clear_cache_on_room_change = [0; 1] - whether to clear sprite cache on every room change.
- load_latest_save = [0; 1] - whether to load latest save on game launch.
- show_fps = [0; 1] - whether to display fps counter on screen.
[log] - log options, allow to setup logging to the chosen OUTPUT with given log groups and verbosity levels.
- [outputname\] = GROUP[:LEVEL][,GROUP[:LEVEL]][,...];
- [outputname\] = +GROUPLIST[:LEVEL]; Groups may be defined either by name or by a LIST of one-letter IDs, preceded by '+', e.g. +ABCD:LEVEL. Verbosity may be defined either by name or a numeric ID.
  - OUTPUTs are:
    - stdout, file, console (where "console" is internal engine's console);
  - GROUPs are:
    - all, main (m), game (g), manobj (o), sdl (l), script (s), sprcache (c);
  - LEVELs are:
    - all, alert (1), fatal (2), error (3), warn (4), info (5), debug (6);
  - Examples:
    - file=all:warn
    - stdout=+mg:debug
- file-path = [string] - custom path to the log file.
- sdl = LEVEL - setup SDL's own logging level, defined either by name or numeric ID:
  - verbose (1), debug (2), info (3), warn (4), error (5), critical (6).
[override] - special options, overriding game behavior.
- multitasking = [0; 1] - lock the game in the "single-tasking" or "multitasking" mode. In the nutshell, "multitasking" here means that the game will continue running when player switched away from game window; otherwise it will freeze until player switches back.
- os = [string] - trick the game to think that it runs on a particular operating system. This may come handy if the game is scripted to play differently depending on OS. Possible choices are:
  - dos - MS DOS;
  - win - Windows;
  - linux - Linux;
  - mac - MacOS.
- restore_game_key = [integer] - key for calling built-in restore game dialog. Key value corresponds to the AGS script keycode.
- save_game_key = [integer] - key for calling built-in save game dialog.
- upscale = [0; 1] - run game in the "upscale mode". The earlier versions of AGS provided support for "upscaling" low-res games to hi-res. The script API has means for detecting if the game is running upscaled, and game developer could use this opportunity to setup game accordingly (e.g. assign hi-res fonts, etc). This options works only for games created before AGS 3.1.0 with low-res native resolution, such as 320x200 or 320x240, and it may somewhat improve game looks.
[disabled] - special instructions for the setup program hinting to disable particular options or lock some in the certain state. Ignored by the engine.
- render_at_screenres = [0; 1] - tells to lock "Render sprites in screen resolution" in a default state;
- speechvox = [0; 1] - tells to lock "Use digital speech pack" in a default state;
- filters = [0; 1] - tells to lock "Graphics filter" selection in a default state;
- <filter id> - tells to remove particular graphics filter from the selection list;

Command line

General usage: ags [OPTIONS] [GAMEFILE PATH or GAME DIRECTORY] (Where "ags" is the executable name)

Following OPTIONS are supported when running from the command line:

-? / --help - prints the most useful command line arguments and quits.
-v / --version - prints the engine version and quits.
--clear-cache-on-room-change - clears sprite cache on every room change
--conf <FILEPATH> - specify an explicit config file to read on startup.
--console-attach - write the output to the parent process's console (Windows only).
--fps - display fps counter.
--fullscreen - run in fullscreen mode.
--gfxdriver <name> - use specified graphics driver (see list above).
--gfxfilter <name> [ <game_scaling> ] - use specified graphics filter and scaling factor (see explanation above).
--loadsavedgame <filepath> - load savegame on startup.
--localuserconf - read and write the user config in the game's directory rather than using the standard system path. The game directory must be writable.
--log-OUTPUT=GROUP[:LEVEL][,GROUP[:LEVEL]][,...];
--log-OUTPUT=+GROUPLIST[:LEVEL] - setup logging to the chosen OUTPUT with the given log groups and verbosity levels (see explanation above).
- Examples:
  - --log-file=all:warn
  - --log-stdout=+mg:debug
--log-file-path=PATH - define a custom path for the log file.
--no-message-box - disable alerts as modal message boxes (Windows only).
--noiface - don't draw game GUI (for test purposes).
--noscript - don't run room scripts (for test purposes); WARNING: unreliable.
--nospr - don't draw room objects and characters (for test purposes).
--noupdate - don't run game update (for test purposes).
--novideo - don't play game videos (for test purposes).
--rotation <MODE> - screen rotation preferences. MODEs are: unlocked (0), portrait (1), landscape (2).
--sdl-log=LEVEL - setup SDL's own logging level (see explanation for the related config option).
--setup - run integrated setup dialog. Currently only supported by Windows version.
--shared-data-dir <DIR> - set the shared game data directory. Corresponds to the "shared_data_dir" config option.
--startr <room_number> - start the game by loading a certain room (for test purposes).
--tell - print various information concerning engine and the game, and quit. Output is done in INI format.
- --tell-config - print contents of a merged game config.
- --tell-configpath - print paths to available config files.
- --tell-data - print information on game data and its location.
- --tell-gameproperties - print information on game general settings.
- --tell-engine - print the engine name and version.
- --tell-filepath - print all filepaths the engine uses for the game.
- --tell-graphicdriver - print a list of supported graphic drivers.
--test - run the game in the test mode, unlocking test key combinations and console.
--translation - select the given translation on start.
--user-data-dir <DIR> - set the save game directory. Corresponds to "user_data_dir" config option.
--windowed - run in windowed mode.