Skip to content

Releases: filecoin-project/lotus

v1.32.0-rc2

13 Dec 09:06
@github-actions github-actions
v1.32.0-rc2
a9718c8
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.32.0-rc2 Pre-release
Pre-release

This release candidate cancels the upgrade epoch for the Calibration network, orginially planned to happen on 2024-12-16T23:00:00Z. Please read the full announcement here.

Calibration network node operators that has already upgraded to Lotus v1.32.0-rc1, need to update to the Lotus v1.32.0-rc2 by 2024-12-16T23:00:00Z. Node. Calibration network node operators that has not upgraded to the Lotus v1.32.0-rc1, can stay on the release that they are already on.

Note

  1. This release candidate unsets the Calibration network upgrade epoch, originally planned to happen on 2024-12-16T23:00:00Z.
  2. This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected December 18th).

☢️ Upgrade Warnings ☢️

  • If you have EnableEthRPC set to true in your config.toml, you need to ensure that EnableIndexer in the new ChainIndexer configuration section is also set to true. Failing to do so will result in an error during node initialization. You can read more about the new improved ChainIndexer feature in the documentation for it here.
  • If you are running the v1.30.x version of Lotus, please go through the Upgrade Warnings section for the v1.30.* releases and v1.31.* before upgrading to this release.

🏛️ Filecoin network version 25 FIPs

  • TBD

📦 v16 Builtin Actor Bundle

This release candidate uses the v16.0.0-rc1

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV25 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.

We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

New Features highlight

Improvements

Bug Fixes

  • Make EthTraceFilter / trace_filter skip null rounds instead of erroring. (filecoin-project/lotus#12702)
  • Event APIs (GetActorEventsRaw, SubscribeActorEventsRaw, eth_getLogs, eth_newFilter, etc.) will now return an error when a request matches more than MaxFilterResults (default: 10,000) rather than silently truncating the results. Also apply an internal event matcher for eth_getLogs (etc.) to avoid builtin actor events on database query so as not to include them in MaxFilterResults calculation. (filecoin-project/lotus#12671)
  • ChainIndexer#GetMsgInfo returns an ErrNotFound when there are no rows. (filecoin-project/lotus#12680)
  • Gracefully handle EAM CreateAccount failures in EthTraceBlock (trace_block) and EthTraceTransaction (trace_transaction) calls. (filecoin-project/lotus#12730)
  • Make f3 gen power command being non-deterministic (filecoin-project/lotus#12764)

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Masih H. Derkani 17 +2480/-1075 47
Krishang Shah 1 +3214/-117 66
Steven Allen 4 +1317/-1632 22
Rod Vagg 13 +1164/-307 56
Łukasz Magiera 1 +945/-467 31
Phi-rjan 7 +328/-323 35
Jakub Sztandera 3 +308/-12 7
Aryan Tikarya 1 +281/-2 5
Viraj Bhartiya 1 +29/-14 3
Phi 1 +9/-9 8
huajin tong 1 +6/-6 6
ZenGround0 1 +9/-1 2
chuangjinglu 1 +3/-3 3
pinglanlu 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Assets 8
Loading

miner/v1.32.0-rc2

13 Dec 09:06
@github-actions github-actions
miner/v1.32.0-rc2
a9718c8
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.32.0-rc2 Pre-release
Pre-release

This release candidate cancels the upgrade epoch for the Calibration network, orginially planned to happen on 2024-12-16T23:00:00Z. Please read the full announcement here.

Calibration network node operators that has already upgraded to Lotus v1.32.0-rc1, need to update to the Lotus v1.32.0-rc2 by 2024-12-16T23:00:00Z. Node. Calibration network node operators that has not upgraded to the Lotus v1.32.0-rc1, can stay on the release that they are already on.

Note

  1. This release candidate unsets the Calibration network upgrade epoch, originally planned to happen on 2024-12-16T23:00:00Z.
  2. This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected December 18th).

☢️ Upgrade Warnings ☢️

  • If you have EnableEthRPC set to true in your config.toml, you need to ensure that EnableIndexer in the new ChainIndexer configuration section is also set to true. Failing to do so will result in an error during node initialization. You can read more about the new improved ChainIndexer feature in the documentation for it here.
  • If you are running the v1.30.x version of Lotus, please go through the Upgrade Warnings section for the v1.30.* releases and v1.31.* before upgrading to this release.

🏛️ Filecoin network version 25 FIPs

  • TBD

📦 v16 Builtin Actor Bundle

This release candidate uses the v16.0.0-rc1

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV25 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.

We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

New Features highlight

Improvements

Bug Fixes

  • Make EthTraceFilter / trace_filter skip null rounds instead of erroring. (filecoin-project/lotus#12702)
  • Event APIs (GetActorEventsRaw, SubscribeActorEventsRaw, eth_getLogs, eth_newFilter, etc.) will now return an error when a request matches more than MaxFilterResults (default: 10,000) rather than silently truncating the results. Also apply an internal event matcher for eth_getLogs (etc.) to avoid builtin actor events on database query so as not to include them in MaxFilterResults calculation. (filecoin-project/lotus#12671)
  • ChainIndexer#GetMsgInfo returns an ErrNotFound when there are no rows. (filecoin-project/lotus#12680)
  • Gracefully handle EAM CreateAccount failures in EthTraceBlock (trace_block) and EthTraceTransaction (trace_transaction) calls. (filecoin-project/lotus#12730)
  • Make f3 gen power command being non-deterministic (filecoin-project/lotus#12764)

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Masih H. Derkani 17 +2480/-1075 47
Krishang Shah 1 +3214/-117 66
Steven Allen 4 +1317/-1632 22
Rod Vagg 13 +1164/-307 56
Łukasz Magiera 1 +945/-467 31
Phi-rjan 7 +328/-323 35
Jakub Sztandera 3 +308/-12 7
Aryan Tikarya 1 +281/-2 5
Viraj Bhartiya 1 +29/-14 3
Phi 1 +9/-9 8
huajin tong 1 +6/-6 6
ZenGround0 1 +9/-1 2
chuangjinglu 1 +3/-3 3
pinglanlu 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Assets 8
Loading

v1.32.0-rc1

05 Dec 09:42
@github-actions github-actions
v1.32.0-rc1
8e1223e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.32.0-rc1 Pre-release
Pre-release

This is the first release candidate of the upcoming MANDATORY Lotus v1.32.0 release, which will deliver the Filecoin network version 25, codenamed “Teep” 🦵.

This release candidate sets the upgrade epoch for the calibration network to Epoch 2235454 - 2024-12-16T23:00:00Z. This should be the equivalent to:

  • 15:00 in Los-Angeles
  • 23:00 in London
  • 07:00 in Beijing (NB: 2024-12-17 in CST)

You can follow this release issue for keeping up with the other expected release dates, epochs, and updates: (filecoin-project/lotus#12750)

Note

  1. This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected December 18th).

☢️ Upgrade Warnings ☢️

  • If you are running the v1.30.x version of Lotus, please go through the Upgrade Warnings section for the v1.30.* releases and v1.31.* before upgrading to this release.

🏛️ Filecoin network version 25 FIPs

  • FIP-0086: Fast Finality in Filecoin (F3)

📦 v16 Builtin Actor Bundle

This release candidate uses the v16.0.0-rc1

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV25 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.

We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

New Features highlight

Improvements

  • The miner actor builtin QAPowerForWeight no longer accepts the unused "dealWeight" parameter, the function signature now only takes 3 arguments: sectorSize, sectorDuration, verifiedWeight. (filecoin-project/lotus#12445)
  • Fix checkpointed tipsets being expanded (filecoin-project/lotus#12747)

Bug Fixes

  • Make EthTraceFilter / trace_filter skip null rounds instead of erroring. (filecoin-project/lotus#12702)
  • Event APIs (GetActorEventsRaw, SubscribeActorEventsRaw, eth_getLogs, eth_newFilter, etc.) will now return an error when a request matches more than MaxFilterResults (default: 10,000) rather than silently truncating the results. Also apply an internal event matcher for eth_getLogs (etc.) to avoid builtin actor events on database query so as not to include them in MaxFilterResults calculation. (filecoin-project/lotus#12671)
  • ChainIndexer#GetMsgInfo returns an ErrNotFound when there are no rows. (filecoin-project/lotus#12680)
  • Gracefully handle EAM CreateAccount failures in EthTraceBlock (trace_block) and EthTraceTransaction (trace_transaction) calls. (filecoin-project/lotus#12730)

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Masih H. Derkani 17 +2480/-1075 47
Krishang Shah 1 +3214/-117 66
Steven Allen 4 +1317/-1632 22
Rod Vagg 13 +1164/-307 56
Łukasz Magiera 1 +945/-467 31
Phi-rjan 7 +328/-323 35
Jakub Sztandera 3 +308/-12 7
Aryan Tikarya 1 +281/-2 5
Viraj Bhartiya 1 +29/-14 3
Phi 1 +9/-9 8
huajin tong 1 +6/-6 6
ZenGround0 1 +9/-1 2
chuangjinglu 1 +3/-3 3
pinglanlu 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Assets 8
Loading

miner/v1.32.0-rc1

05 Dec 09:42
@github-actions github-actions
miner/v1.32.0-rc1
8e1223e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.32.0-rc1 Pre-release
Pre-release

This is the first release candidate of the upcoming MANDATORY Lotus v1.32.0 release, which will deliver the Filecoin network version 25, codenamed “Teep” 🦵.

This release candidate sets the upgrade epoch for the calibration network to Epoch 2235454 - 2024-12-16T23:00:00Z. This should be the equivalent to:

  • 15:00 in Los-Angeles
  • 23:00 in London
  • 07:00 in Beijing (NB: 2024-12-17 in CST)

You can follow this release issue for keeping up with the other expected release dates, epochs, and updates: (filecoin-project/lotus#12750)

Note

  1. This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected December 18th).

☢️ Upgrade Warnings ☢️

  • If you are running the v1.30.x version of Lotus, please go through the Upgrade Warnings section for the v1.30.* releases and v1.31.* before upgrading to this release.

🏛️ Filecoin network version 25 FIPs

  • FIP-0086: Fast Finality in Filecoin (F3)

📦 v16 Builtin Actor Bundle

This release candidate uses the v16.0.0-rc1

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV25 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.

We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

New Features highlight

Improvements

  • The miner actor builtin QAPowerForWeight no longer accepts the unused "dealWeight" parameter, the function signature now only takes 3 arguments: sectorSize, sectorDuration, verifiedWeight. (filecoin-project/lotus#12445)
  • Fix checkpointed tipsets being expanded (filecoin-project/lotus#12747)

Bug Fixes

  • Make EthTraceFilter / trace_filter skip null rounds instead of erroring. (filecoin-project/lotus#12702)
  • Event APIs (GetActorEventsRaw, SubscribeActorEventsRaw, eth_getLogs, eth_newFilter, etc.) will now return an error when a request matches more than MaxFilterResults (default: 10,000) rather than silently truncating the results. Also apply an internal event matcher for eth_getLogs (etc.) to avoid builtin actor events on database query so as not to include them in MaxFilterResults calculation. (filecoin-project/lotus#12671)
  • ChainIndexer#GetMsgInfo returns an ErrNotFound when there are no rows. (filecoin-project/lotus#12680)
  • Gracefully handle EAM CreateAccount failures in EthTraceBlock (trace_block) and EthTraceTransaction (trace_transaction) calls. (filecoin-project/lotus#12730)

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Masih H. Derkani 17 +2480/-1075 47
Krishang Shah 1 +3214/-117 66
Steven Allen 4 +1317/-1632 22
Rod Vagg 13 +1164/-307 56
Łukasz Magiera 1 +945/-467 31
Phi-rjan 7 +328/-323 35
Jakub Sztandera 3 +308/-12 7
Aryan Tikarya 1 +281/-2 5
Viraj Bhartiya 1 +29/-14 3
Phi 1 +9/-9 8
huajin tong 1 +6/-6 6
ZenGround0 1 +9/-1 2
chuangjinglu 1 +3/-3 3
pinglanlu 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Assets 8
Loading

v1.31.0

02 Dec 07:47
@github-actions github-actions
v1.31.0
198ee01
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.31.0 Latest
Latest

The Lotus v1.31.0 release introduces the new ChainIndexer subsystem, enhancing the indexing of Filecoin chain state for improved RPC performance. Several bug fixes in the block production loop are also included. Please review the upgrade warnings and documentation for any important changes affecting RPC providers, node operators and storage providers.

☢️ Upgrade Warnings ☢️

  • The introduction of the new ChainIndexer subsystem replaces the existing MsgIndex, EthTxHashLookup, and EventIndex implementations. This change may affect RPC providers and node operators who use or expose Ethereum and/or events APIs. It is crucial to review the ChainIndexer documentation for operators to understand how to enable, configure, and use the new Indexer.

⭐ New Feature Highlights:

  • New ChainIndexer subsystem to index Filecoin chain state such as tipsets, messages, events and ETH transactions for accurate and faster RPC responses. The ChainIndexer replaces the existing MsgIndex, EthTxHashLookup and EventIndex implementations in Lotus, which suffer from a multitude of known problems. If you are an RPC provider or a node operator who uses or exposes Ethereum and/or events APIs, please refer to the ChainIndexer documentation for operators for information on how to enable, configure and use the new Indexer. While there is no automated data migration and one can upgrade and downgrade without backups, there are manual steps that need to be taken to backfill data when upgrading to this Lotus version, or downgrading to the previous version without ChainIndexer. Please be aware that that this feature removes some options in the Lotus configuration file, if these have been set, Lotus will report an error when starting. See the documentation for more information
  • lotus chain head now supports a --height flag to print just the epoch number of the current chain head (filecoin-project/lotus#12609)
  • Implement EthGetTransactionByBlockNumberAndIndex (eth_getTransactionByBlockNumberAndIndex) and EthGetTransactionByBlockHashAndIndex (eth_getTransactionByBlockHashAndIndex) methods. (filecoin-project/lotus#12618)
  • lotus-shed indexes inspect-indexes now performs a comprehensive comparison of the event index data for each message by comparing the AMT root CID from the message receipt with the root of a reconstructed AMT. Previously inspect-indexes simply compared event counts. Comparing AMT roots instead confirms all the event data is byte-perfect. (filecoin-project/lotus#12570)
  • Return a "data" field on the "error" returned from RPC when eth_call and eth_estimateGas APIs encounter execution reverted errors. This is a standard expectation of Ethereum RPC tooling and may improve compatibility in some cases. (filecoin-project/lotus#12553)
  • Improve ETH-filter performance for nodes serving many clients. (filecoin-project/lotus#12603)
  • Implement F3 utility CLIs to list the power table for a given instance and sum the proportional power of a set of actors that participate in a given instance. (filecoin-project/lotus#12698)

🐛 Bug Fix Highlights

  • Add logic to check if the miner's owner address is delegated (f4 address). If it is delegated, the lotus-shed sectors termination-estimate command now sends the termination state call using the worker ID. This fix resolves the issue where termination-estimate did not function correctly for miners with delegated owner addresses. (filecoin-project/lotus#12569)
  • The Lotus Miner will now always mine on the latest chain head returned by lotus, even if that head has less "weight" than the previously seen head. This is necessary because F3 may end up finalizing a tipset with a lower weight, although this situation should be rare on the Filecoin mainnet. (filecoin-project/lotus#12659) and (filecoin-project/lotus#12690)
  • Make the ordering of event output for eth_ APIs and GetActorEventsRaw consistent, sorting ascending on: epoch, message index, event index and original event entry order. (filecoin-project/lotus#12623)
  • Return a consistent error when encountering null rounds in ETH RPC method calls. (filecoin-project/lotus#12655)
  • Correct erroneous sector QAP-calculation upon sector extension in lotus-miner cli. (filecoin-project/lotus#12698)

📝 Changelog

For the full set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Aarsh Shah 2 +6725/-5410 84
Masih H. Derkani 13 +1924/-867 61
Viraj Bhartiya 6 +2048/-703 41
Steven Allen 25 +1394/-404 53
Rod Vagg 13 +502/-272 39
Phi-rjan 8 +175/-64 20
Jakub Sztandera 7 +107/-66 15
aarshkshah1992 1 +61/-30 5
Steve Loeppky 1 +78/-2 4
Krishang Shah 1 +7/-17 1
Łukasz Magiera 1 +9/-10 3
Phi 1 +9/-9 8
Danial Ahn 1 +14/-1 2
hanabi1224 1 +7/-6 1
web3-bot 1 +1/-1 1
asamuj 1 +1/-1 1
Andrew Jackson (Ajax) 1 +2/-0 1
Assets 8
Loading

miner/v1.31.0

02 Dec 07:47
@github-actions github-actions
miner/v1.31.0
198ee01
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.31.0

The Lotus v1.31.0 release introduces the new ChainIndexer subsystem, enhancing the indexing of Filecoin chain state for improved RPC performance. Several bug fixes in the block production loop are also included. Please review the upgrade warnings and documentation for any important changes affecting RPC providers, node operators and storage providers.

☢️ Upgrade Warnings ☢️

  • The introduction of the new ChainIndexer subsystem replaces the existing MsgIndex, EthTxHashLookup, and EventIndex implementations. This change may affect RPC providers and node operators who use or expose Ethereum and/or events APIs. It is crucial to review the ChainIndexer documentation for operators to understand how to enable, configure, and use the new Indexer.

⭐ New Feature Highlights:

  • New ChainIndexer subsystem to index Filecoin chain state such as tipsets, messages, events and ETH transactions for accurate and faster RPC responses. The ChainIndexer replaces the existing MsgIndex, EthTxHashLookup and EventIndex implementations in Lotus, which suffer from a multitude of known problems. If you are an RPC provider or a node operator who uses or exposes Ethereum and/or events APIs, please refer to the ChainIndexer documentation for operators for information on how to enable, configure and use the new Indexer. While there is no automated data migration and one can upgrade and downgrade without backups, there are manual steps that need to be taken to backfill data when upgrading to this Lotus version, or downgrading to the previous version without ChainIndexer. Please be aware that that this feature removes some options in the Lotus configuration file, if these have been set, Lotus will report an error when starting. See the documentation for more information
  • lotus chain head now supports a --height flag to print just the epoch number of the current chain head (filecoin-project/lotus#12609)
  • Implement EthGetTransactionByBlockNumberAndIndex (eth_getTransactionByBlockNumberAndIndex) and EthGetTransactionByBlockHashAndIndex (eth_getTransactionByBlockHashAndIndex) methods. (filecoin-project/lotus#12618)
  • lotus-shed indexes inspect-indexes now performs a comprehensive comparison of the event index data for each message by comparing the AMT root CID from the message receipt with the root of a reconstructed AMT. Previously inspect-indexes simply compared event counts. Comparing AMT roots instead confirms all the event data is byte-perfect. (filecoin-project/lotus#12570)
  • Return a "data" field on the "error" returned from RPC when eth_call and eth_estimateGas APIs encounter execution reverted errors. This is a standard expectation of Ethereum RPC tooling and may improve compatibility in some cases. (filecoin-project/lotus#12553)
  • Improve ETH-filter performance for nodes serving many clients. (filecoin-project/lotus#12603)
  • Implement F3 utility CLIs to list the power table for a given instance and sum the proportional power of a set of actors that participate in a given instance. (filecoin-project/lotus#12698)

🐛 Bug Fix Highlights

  • Add logic to check if the miner's owner address is delegated (f4 address). If it is delegated, the lotus-shed sectors termination-estimate command now sends the termination state call using the worker ID. This fix resolves the issue where termination-estimate did not function correctly for miners with delegated owner addresses. (filecoin-project/lotus#12569)
  • The Lotus Miner will now always mine on the latest chain head returned by lotus, even if that head has less "weight" than the previously seen head. This is necessary because F3 may end up finalizing a tipset with a lower weight, although this situation should be rare on the Filecoin mainnet. (filecoin-project/lotus#12659) and (filecoin-project/lotus#12690)
  • Make the ordering of event output for eth_ APIs and GetActorEventsRaw consistent, sorting ascending on: epoch, message index, event index and original event entry order. (filecoin-project/lotus#12623)
  • Return a consistent error when encountering null rounds in ETH RPC method calls. (filecoin-project/lotus#12655)
  • Correct erroneous sector QAP-calculation upon sector extension in lotus-miner cli. (filecoin-project/lotus#12698)

📝 Changelog

For the full set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Aarsh Shah 2 +6725/-5410 84
Masih H. Derkani 13 +1924/-867 61
Viraj Bhartiya 6 +2048/-703 41
Steven Allen 25 +1394/-404 53
Rod Vagg 13 +502/-272 39
Phi-rjan 8 +175/-64 20
Jakub Sztandera 7 +107/-66 15
aarshkshah1992 1 +61/-30 5
Steve Loeppky 1 +78/-2 4
Krishang Shah 1 +7/-17 1
Łukasz Magiera 1 +9/-10 3
Phi 1 +9/-9 8
Danial Ahn 1 +14/-1 2
hanabi1224 1 +7/-6 1
web3-bot 1 +1/-1 1
asamuj 1 +1/-1 1
Andrew Jackson (Ajax) 1 +2/-0 1
Assets 8
Loading

v1.31.0-rc1

12 Nov 16:56
@github-actions github-actions
v1.31.0-rc1
6cd7982
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.31.0-rc1 Pre-release
Pre-release

This Lotus release candidate introduces the new ChainIndexer subsystem, enhancing the indexing of Filecoin chain state for improved RPC performance. Several bug fixes in the block production loop are also included. Please review the upgrade warnings and documentation for any important changes affecting RPC providers, node operators and storage providers.

☢️ Upgrade Warnings ☢️

  • The introduction of the new ChainIndexer subsystem replaces the existing MsgIndex, EthTxHashLookup, and EventIndex implementations. This change may affect RPC providers and node operators who use or expose Ethereum and/or events APIs. It is crucial to review the ChainIndexer documentation for operators to understand how to enable, configure, and use the new Indexer.

⭐ New Feature Highlights:

  • New ChainIndexer subsystem to index Filecoin chain state such as tipsets, messages, events and ETH transactions for accurate and faster RPC responses. The ChainIndexer replaces the existing MsgIndex, EthTxHashLookup and EventIndex implementations in Lotus, which suffer from a multitude of known problems. If you are an RPC provider or a node operator who uses or exposes Ethereum and/or events APIs, please refer to the ChainIndexer documentation for operators for information on how to enable, configure and use the new Indexer. While there is no automated data migration and one can upgrade and downgrade without backups, there are manual steps that need to be taken to backfill data when upgrading to this Lotus version, or downgrading to the previous version without ChainIndexer. Please be aware that that this feature removes some options in the Lotus configuration file, if these have been set, Lotus will report an error when starting. See the documentation for more information
  • lotus chain head now supports a --height flag to print just the epoch number of the current chain head (filecoin-project/lotus#12609)
  • Implement EthGetTransactionByBlockNumberAndIndex (eth_getTransactionByBlockNumberAndIndex) and EthGetTransactionByBlockHashAndIndex (eth_getTransactionByBlockHashAndIndex) methods. (filecoin-project/lotus#12618)
  • lotus-shed indexes inspect-indexes now performs a comprehensive comparison of the event index data for each message by comparing the AMT root CID from the message receipt with the root of a reconstructed AMT. Previously inspect-indexes simply compared event counts. Comparing AMT roots instead confirms all the event data is byte-perfect. (filecoin-project/lotus#12570)
  • Reduce size of embedded genesis CAR files by removing WASM actor blocks and compressing with zstd. This reduces the lotus binary size by approximately 10 MiB. (filecoin-project/lotus#12439)

🐛 Bug Fix Highlights

  • Add logic to check if the miner's owner address is delegated (f4 address). If it is delegated, the lotus-shed sectors termination-estimate command now sends the termination state call using the worker ID. This fix resolves the issue where termination-estimate did not function correctly for miners with delegated owner addresses. (filecoin-project/lotus#12569)
  • The mining loop will now correctly "stick" to the same upstream lotus node for all operations pertaining to mining a single block (filecoin-project/lotus#12665).
  • The Lotus Miner will now always mine on the latest chain head returned by lotus, even if that head has less "weight" than the previously seen head. This is necessary because F3 may end up finalizing a tipset with a lower weight, although this situation should be rare on the Filecoin mainnet. (filecoin-project/lotus#12659)
  • Make the ordering of event output for eth_ APIs and GetActorEventsRaw consistent, sorting ascending on: epoch, message index, event index and original event entry order. (filecoin-project/lotus#12623)
  • Event APIs (Eth events and actor events) should only return reverted events if client queries by specific block hash / tipset. Eth and actor event subscription APIs should always return reverted events to enable accurate observation of real-time changes. (filecoin-project/lotus#12585)
  • Fix a bug in the lotus-shed indexes backfill-events command that may result in either duplicate events being backfilled where there are existing events (such an operation should be idempotent) or events erroneously having duplicate logIndex values when queried via ETH APIs. (filecoin-project/lotus#12567)

📝 Changelog

For the full set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Aarsh Shah 2 +6725/-5410 84
Masih H. Derkani 13 +1924/-867 61
Viraj Bhartiya 6 +2048/-703 41
Steven Allen 25 +1394/-404 53
Rod Vagg 13 +502/-272 39
Phi-rjan 8 +175/-64 20
Jakub Sztandera 7 +107/-66 15
aarshkshah1992 1 +61/-30 5
Steve Loeppky 1 +78/-2 4
Krishang Shah 1 +7/-17 1
Łukasz Magiera 1 +9/-10 3
Phi 1 +9/-9 8
Danial Ahn 1 +14/-1 2
hanabi1224 1 +7/-6 1
web3-bot 1 +1/-1 1
asamuj 1 +1/-1 1
Andrew Jackson (Ajax) 1 +2/-0 1
Assets 8
Loading

miner/v1.31.0-rc1

12 Nov 16:57
@github-actions github-actions
miner/v1.31.0-rc1
6cd7982
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.31.0-rc1 Pre-release
Pre-release

This Lotus release candidate introduces the new ChainIndexer subsystem, enhancing the indexing of Filecoin chain state for improved RPC performance. Several bug fixes in the block production loop are also included. Please review the upgrade warnings and documentation for any important changes affecting RPC providers, node operators and storage providers.

☢️ Upgrade Warnings ☢️

  • The introduction of the new ChainIndexer subsystem replaces the existing MsgIndex, EthTxHashLookup, and EventIndex implementations. This change may affect RPC providers and node operators who use or expose Ethereum and/or events APIs. It is crucial to review the ChainIndexer documentation for operators to understand how to enable, configure, and use the new Indexer.

⭐ New Feature Highlights:

  • New ChainIndexer subsystem to index Filecoin chain state such as tipsets, messages, events and ETH transactions for accurate and faster RPC responses. The ChainIndexer replaces the existing MsgIndex, EthTxHashLookup and EventIndex implementations in Lotus, which suffer from a multitude of known problems. If you are an RPC provider or a node operator who uses or exposes Ethereum and/or events APIs, please refer to the ChainIndexer documentation for operators for information on how to enable, configure and use the new Indexer. While there is no automated data migration and one can upgrade and downgrade without backups, there are manual steps that need to be taken to backfill data when upgrading to this Lotus version, or downgrading to the previous version without ChainIndexer. Please be aware that that this feature removes some options in the Lotus configuration file, if these have been set, Lotus will report an error when starting. See the documentation for more information
  • lotus chain head now supports a --height flag to print just the epoch number of the current chain head (filecoin-project/lotus#12609)
  • Implement EthGetTransactionByBlockNumberAndIndex (eth_getTransactionByBlockNumberAndIndex) and EthGetTransactionByBlockHashAndIndex (eth_getTransactionByBlockHashAndIndex) methods. (filecoin-project/lotus#12618)
  • lotus-shed indexes inspect-indexes now performs a comprehensive comparison of the event index data for each message by comparing the AMT root CID from the message receipt with the root of a reconstructed AMT. Previously inspect-indexes simply compared event counts. Comparing AMT roots instead confirms all the event data is byte-perfect. (filecoin-project/lotus#12570)
  • Reduce size of embedded genesis CAR files by removing WASM actor blocks and compressing with zstd. This reduces the lotus binary size by approximately 10 MiB. (filecoin-project/lotus#12439)

🐛 Bug Fix Highlights

  • Add logic to check if the miner's owner address is delegated (f4 address). If it is delegated, the lotus-shed sectors termination-estimate command now sends the termination state call using the worker ID. This fix resolves the issue where termination-estimate did not function correctly for miners with delegated owner addresses. (filecoin-project/lotus#12569)
  • The mining loop will now correctly "stick" to the same upstream lotus node for all operations pertaining to mining a single block (filecoin-project/lotus#12665).
  • The Lotus Miner will now always mine on the latest chain head returned by lotus, even if that head has less "weight" than the previously seen head. This is necessary because F3 may end up finalizing a tipset with a lower weight, although this situation should be rare on the Filecoin mainnet. (filecoin-project/lotus#12659)
  • Make the ordering of event output for eth_ APIs and GetActorEventsRaw consistent, sorting ascending on: epoch, message index, event index and original event entry order. (filecoin-project/lotus#12623)
  • Event APIs (Eth events and actor events) should only return reverted events if client queries by specific block hash / tipset. Eth and actor event subscription APIs should always return reverted events to enable accurate observation of real-time changes. (filecoin-project/lotus#12585)
  • Fix a bug in the lotus-shed indexes backfill-events command that may result in either duplicate events being backfilled where there are existing events (such an operation should be idempotent) or events erroneously having duplicate logIndex values when queried via ETH APIs. (filecoin-project/lotus#12567)

📝 Changelog

For the full set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Aarsh Shah 2 +6725/-5410 84
Masih H. Derkani 13 +1924/-867 61
Viraj Bhartiya 6 +2048/-703 41
Steven Allen 25 +1394/-404 53
Rod Vagg 13 +502/-272 39
Phi-rjan 8 +175/-64 20
Jakub Sztandera 7 +107/-66 15
aarshkshah1992 1 +61/-30 5
Steve Loeppky 1 +78/-2 4
Krishang Shah 1 +7/-17 1
Łukasz Magiera 1 +9/-10 3
Phi 1 +9/-9 8
Danial Ahn 1 +14/-1 2
hanabi1224 1 +7/-6 1
web3-bot 1 +1/-1 1
asamuj 1 +1/-1 1
Andrew Jackson (Ajax) 1 +2/-0 1
Assets 8
Loading

v1.30.0

07 Nov 03:55
@github-actions github-actions
v1.30.0
9c1964e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.30.0

This is the final release of the MANDATORY Lotus v1.30.0 release, which delivers the Filecoin network version 24, codenamed Tuk Tuk 🛺. This release sets the Mainnet to upgrade at epoch 4461240, corresponding to 2024-11-20T23:00:00Z.

☢️ Upgrade Warnings ☢️

  • If you are running the v1.28.x version of Lotus, please go through the Upgrade Warnings section for the v1.28.* releases and v1.29.*, before upgrading to this release.
  • This release requires a minimum Go version of v1.22.7 or higher.
  • The releases branch has been deprecated with the 202408 split of 'Lotus Node' and 'Lotus Miner'. See https://github.com/filecoin-project/lotus/blob/master/LOTUS_RELEASE_FLOW.md#why-is-the-releases-branch-deprecated-and-what-are-alternatives for more info and alternatives for getting the latest release for both the 'Lotus Node' and 'Lotus Miner' based on the Branch and Tag Strategy.
    • To get the latest Lotus Node tag: git tag -l 'v*' | grep -v -E '-rc' | sort -V -r | head -n 1
    • To get the latest Lotus Miner tag: git tag -l 'miner/v*' | grep -v -E '-rc' | sort -V -r | head -n 1

🏛️ Filecoin network version 24 FIPs

⚠️ The activation of F3 (Fast Finality) has been postponed for mainnet due to unresolved issues in the Client/SP code and the F3 protocol itself. These issues require further testing and resolution before we can safely deploy F3 on the mainnet. Read the full post here.

📦 v15 Builtin Actor Bundle

The v15.0.0 actor bundle is used for supporting this upgrade. Make sure that your Lotus actor bundle matches the v15 actors manifest by running the following cli after upgrading to this release:

lotus state actor-cids --network-version=24
Network Version: 24
Actor Version: 15
Manifest CID: bafy2bzaceakwje2hyinucrhgtsfo44p54iw4g6otbv5ghov65vajhxgntr53u

Actor             CID  
account           bafk2bzacecia5zacqt4gvd4z7275lnkhgraq75shy63cphakphhw6crf4joii
cron              bafk2bzacecbyx7utt3tkvhqnfk64kgtlt5jlvv56o2liwczikgzfowk2cvqvk
datacap           bafk2bzacecrypcpyzidphfl3sf3vhrjbiwzu7w3hoole45wsk2bqpverw4tni
eam               bafk2bzacebybq7keb45l6isqfaiwxy5oi5wlpknhggjheut7q6xwp7mbxxku4
ethaccount        bafk2bzaceajdy72edg3t2zcb6qwv2wgdsysfwdtczcklxcp4hlwh7pkxekja4
evm               bafk2bzaceandffodu45eyro7jr7bizxw7ibipaiskt36xbp4vpvsxtrpkyjfm
init              bafk2bzaceb5mjmy56ediswt2hvwqdfs2xzi4qw3cefkufoat57yyt3iwkg7kw
multisig          bafk2bzaced3csl3buj7chpunsubrhwhchtskx674fpukfen4u6pbpkcheueya
paymentchannel    bafk2bzacea3dpsfxw7cnj6zljmjnnaubp43a5kvuausigztmukektesg2flei
placeholder       bafk2bzacedfvut2myeleyq67fljcrw4kkmn5pb5dpyozovj7jpoez5irnc3ro
reward            bafk2bzaceapkgue3gcxmwx7bvypn33okppa2nwpelcfp7oyo5yln3brixpjpm
storagemarket     bafk2bzaceaqrnikbxymygwhwa2rsvhnqj5kfch75pn5xawnx243brqlfglsl6
storageminer      bafk2bzacecnl2hqe3nozwo7al7kdznqgdrv2hbbbmpcbcwzh3yl4trog433hc
storagepower      bafk2bzacecb3tvvppxmktll3xehjc7mqbfilt6bd4gragbdwxn77hm5frkuac
system            bafk2bzacecvcqje6kcfqeayj66hezlwzfznytwqkxgw7p64xac5f5lcwjpbwe
verifiedregistry  bafk2bzacecudaqwbz6dukmdbfok7xuxcpjqighnizhxun4spdqvnqgftkupp2

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV24 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.
  • RAM usages is expected to be under 20GiB RAM for both the pre-migration and migration.

We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Krishang 2 +34106/-0 109
Rod Vagg 86 +10643/-8291 456
Masih H. Derkani 59 +7700/-4725 298
Steven Allen 55 +6113/-3169 272
kamuik16 7 +4618/-1333 285
Jakub Sztandera 10 +3995/-1226 94
Peter Rabbitson 26 +2313/-2718 275
Viraj Bhartiya 5 +2624/-580 50
Phi 7 +1337/-1519 257
Mikers 1 +1274/-455 23
Phi-rjan 29 +736/-600 92
Andrew Jackson (Ajax) 3 +732/-504 75
LexLuthr 3 +167/-996 8
Aarsh Shah 12 +909/-177 47
web3-bot 40 +445/-550 68
Piotr Galar 6 +622/-372 15
aarshkshah1992 18 +544/-299 40
Steve Loeppky 14 +401/-196 22
Frrist 1 +403/-22 5
Łukasz Magiera 4 +266/-27 13
winniehere 1 +146/-144 3
Jon 1 +209/-41 4
Aryan Tikarya 2 +183/-8 7
adlrocha 2 +123/-38 21
dependabot[bot] 11 +87/-61 22
Jiaying Wang 8 +61/-70 12
Ian Davis 2 +60/-38 5
Aayush Rajasekaran 2 +81/-3 3
hanabi1224 4 +46/-4 5
Laurent Senta 1 +44/-1 2
jennijuju 6 +21/-20 17
parthshah1 1 +23/-13 1
Brendan O'Brien 1 +25/-10 2
Jennifer Wang 4 +24/-8 6
Matthew Rothenberg 3 +10/-18 6
riskrose 1 +8/-8 7
linghuying 1 +5/-5 5
fsgerse 2 +3/-7 3
PolyMa 1 +5/-5 5
zhangguanzhang 1 +3/-3 2
luozexuan 1 +3/-3 3
Po-Chun Chang 1 +6/-0 2
Kevin Martin 1 +4/-1 2
simlecode 1 +2/-2 2
ZenGround0 1 +2/-2 2
GFZRZK 1 +2/-1 1
DemoYeti 1 +2/-1 1
qwdsds 1 +1/-1 1
Samuel Arogbonlo 1 +2/-0 2
Elias Rad 1 +1/-1 1
Assets 8
Loading

miner/v1.30.0

07 Nov 03:56
@github-actions github-actions
miner/v1.30.0
9c1964e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.30.0

This is the final release of the MANDATORY Lotus v1.30.0 release, which delivers the Filecoin network version 24, codenamed Tuk Tuk 🛺. This release sets the Mainnet to upgrade at epoch 4461240, corresponding to 2024-11-20T23:00:00Z.

☢️ Upgrade Warnings ☢️

  • If you are running the v1.28.x version of Lotus, please go through the Upgrade Warnings section for the v1.28.* releases and v1.29.*, before upgrading to this release.
  • This release requires a minimum Go version of v1.22.7 or higher.
  • The releases branch has been deprecated with the 202408 split of 'Lotus Node' and 'Lotus Miner'. See https://github.com/filecoin-project/lotus/blob/master/LOTUS_RELEASE_FLOW.md#why-is-the-releases-branch-deprecated-and-what-are-alternatives for more info and alternatives for getting the latest release for both the 'Lotus Node' and 'Lotus Miner' based on the Branch and Tag Strategy.
    • To get the latest Lotus Node tag: git tag -l 'v*' | grep -v -E '-rc' | sort -V -r | head -n 1
    • To get the latest Lotus Miner tag: git tag -l 'miner/v*' | grep -v -E '-rc' | sort -V -r | head -n 1

🏛️ Filecoin network version 24 FIPs

⚠️ The activation of F3 (Fast Finality) has been postponed for mainnet due to unresolved issues in the Client/SP code and the F3 protocol itself. These issues require further testing and resolution before we can safely deploy F3 on the mainnet. Read the full post here.

📦 v15 Builtin Actor Bundle

The v15.0.0 actor bundle is used for supporting this upgrade. Make sure that your Lotus actor bundle matches the v15 actors manifest by running the following cli after upgrading to this release:

lotus state actor-cids --network-version=24
Network Version: 24
Actor Version: 15
Manifest CID: bafy2bzaceakwje2hyinucrhgtsfo44p54iw4g6otbv5ghov65vajhxgntr53u

Actor             CID  
account           bafk2bzacecia5zacqt4gvd4z7275lnkhgraq75shy63cphakphhw6crf4joii
cron              bafk2bzacecbyx7utt3tkvhqnfk64kgtlt5jlvv56o2liwczikgzfowk2cvqvk
datacap           bafk2bzacecrypcpyzidphfl3sf3vhrjbiwzu7w3hoole45wsk2bqpverw4tni
eam               bafk2bzacebybq7keb45l6isqfaiwxy5oi5wlpknhggjheut7q6xwp7mbxxku4
ethaccount        bafk2bzaceajdy72edg3t2zcb6qwv2wgdsysfwdtczcklxcp4hlwh7pkxekja4
evm               bafk2bzaceandffodu45eyro7jr7bizxw7ibipaiskt36xbp4vpvsxtrpkyjfm
init              bafk2bzaceb5mjmy56ediswt2hvwqdfs2xzi4qw3cefkufoat57yyt3iwkg7kw
multisig          bafk2bzaced3csl3buj7chpunsubrhwhchtskx674fpukfen4u6pbpkcheueya
paymentchannel    bafk2bzacea3dpsfxw7cnj6zljmjnnaubp43a5kvuausigztmukektesg2flei
placeholder       bafk2bzacedfvut2myeleyq67fljcrw4kkmn5pb5dpyozovj7jpoez5irnc3ro
reward            bafk2bzaceapkgue3gcxmwx7bvypn33okppa2nwpelcfp7oyo5yln3brixpjpm
storagemarket     bafk2bzaceaqrnikbxymygwhwa2rsvhnqj5kfch75pn5xawnx243brqlfglsl6
storageminer      bafk2bzacecnl2hqe3nozwo7al7kdznqgdrv2hbbbmpcbcwzh3yl4trog433hc
storagepower      bafk2bzacecb3tvvppxmktll3xehjc7mqbfilt6bd4gragbdwxn77hm5frkuac
system            bafk2bzacecvcqje6kcfqeayj66hezlwzfznytwqkxgw7p64xac5f5lcwjpbwe
verifiedregistry  bafk2bzacecudaqwbz6dukmdbfok7xuxcpjqighnizhxun4spdqvnqgftkupp2

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV24 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.
  • RAM usages is expected to be under 20GiB RAM for both the pre-migration and migration.

We recommend node operators (who haven't enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Krishang 2 +34106/-0 109
Rod Vagg 86 +10643/-8291 456
Masih H. Derkani 59 +7700/-4725 298
Steven Allen 55 +6113/-3169 272
kamuik16 7 +4618/-1333 285
Jakub Sztandera 10 +3995/-1226 94
Peter Rabbitson 26 +2313/-2718 275
Viraj Bhartiya 5 +2624/-580 50
Phi 7 +1337/-1519 257
Mikers 1 +1274/-455 23
Phi-rjan 29 +736/-600 92
Andrew Jackson (Ajax) 3 +732/-504 75
LexLuthr 3 +167/-996 8
Aarsh Shah 12 +909/-177 47
web3-bot 40 +445/-550 68
Piotr Galar 6 +622/-372 15
aarshkshah1992 18 +544/-299 40
Steve Loeppky 14 +401/-196 22
Frrist 1 +403/-22 5
Łukasz Magiera 4 +266/-27 13
winniehere 1 +146/-144 3
Jon 1 +209/-41 4
Aryan Tikarya 2 +183/-8 7
adlrocha 2 +123/-38 21
dependabot[bot] 11 +87/-61 22
Jiaying Wang 8 +61/-70 12
Ian Davis 2 +60/-38 5
Aayush Rajasekaran 2 +81/-3 3
hanabi1224 4 +46/-4 5
Laurent Senta 1 +44/-1 2
jennijuju 6 +21/-20 17
parthshah1 1 +23/-13 1
Brendan O'Brien 1 +25/-10 2
Jennifer Wang 4 +24/-8 6
Matthew Rothenberg 3 +10/-18 6
riskrose 1 +8/-8 7
linghuying 1 +5/-5 5
fsgerse 2 +3/-7 3
PolyMa 1 +5/-5 5
zhangguanzhang 1 +3/-3 2
luozexuan 1 +3/-3 3
Po-Chun Chang 1 +6/-0 2
Kevin Martin 1 +4/-1 2
simlecode 1 +2/-2 2
ZenGround0 1 +2/-2 2
GFZRZK 1 +2/-1 1
DemoYeti 1 +2/-1 1
qwdsds 1 +1/-1 1
Samuel Arogbonlo 1 +2/-0 2
Elias Rad 1 +1/-1 1
Assets 8
Loading