Thorsten's HA Webinterface

**My misterhouse**

image:WebUI.jpg width="870" height="680" This picture shows my MH-mainmenu. The layout is colpletely css-based

Actually i'm working on integrating some other HA-Systems in MH.

The first is HS485 and The FS20 system, both from ELV (german electronic distributor) I would replace my X10 components, because the are not very reliable.... (i have to note the WAF-Woman Acceptence Factor) so it'not so good if you push an switch and nothing happens...

Integration of HS485 System

Here are my electricity-counter an my Gas-Counter with monitoring our energy usage. The monitoring uses a DS2423 1-wire counter with a optical (for electricity) and a reed-contact for the Gas monitoring. It work well but the resolution for measuring the electricity is limited to 160W/5min because the meterdisc only runs 75 turns for one kWh (I'm thinking about an additional counter with more pulses pro kWh) image:Gaszaehler.jpg width="201" height="253" image:Zaehler.jpg width="226" height="169"

Here are the gaphs were created: image:strom.png width="623" height="247"

image:gas.png width="623" height="249"