This repository has been archived by the owner on Oct 3, 2024. It is now read-only.
[Question] Procedure of setting up an intel nuc (kaby lake) with xen-server #25
Comments
zhenyw
pushed a commit
that referenced
this issue
May 16, 2018
syzbot caught an infinite recursion in nsh_gso_segment().
Problem here is that we need to make sure the NSH header is of
reasonable length.
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by syz-executor0/10189:
#0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517
#1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
dccp_close: ABORT with 65423 bytes unread
#32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
#47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline]
#47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787
INFO: lockdep is turned off.
CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
__lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449
lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920
rcu_lock_acquire include/linux/rcupdate.h:246 [inline]
rcu_read_lock include/linux/rcupdate.h:632 [inline]
skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107
skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792
__skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865
skb_gso_segment include/linux/netdevice.h:4025 [inline]
validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118
validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168
sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312
qdisc_restart net/sched/sch_generic.c:399 [inline]
__qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410
__dev_xmit_skb net/core/dev.c:3243 [inline]
__dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551
dev_queue_xmit+0x17/0x20 net/core/dev.c:3616
packet_snd net/packet/af_packet.c:2951 [inline]
packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976
sock_sendmsg_nosec net/socket.c:629 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:639
__sys_sendto+0x3d7/0x670 net/socket.c:1789
__do_sys_sendto net/socket.c:1801 [inline]
__se_sys_sendto net/socket.c:1797 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: c411ed8 ("nsh: add GSO support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Benc <jbenc@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhenyw
pushed a commit
that referenced
this issue
Jul 3, 2018
In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb132: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhenyw
pushed a commit
that referenced
this issue
Jul 24, 2018
Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
zhiwang1
pushed a commit
that referenced
this issue
Sep 25, 2018
Chen Yu reported a divide-by-zero error when accessing the 'size' resctrl file when a MBA resource is enabled. divide error: 0000 [#1] SMP PTI CPU: 93 PID: 1929 Comm: cat Not tainted 4.19.0-rc2-debug-rdt+ #25 RIP: 0010:rdtgroup_cbm_to_size+0x7e/0xa0 Call Trace: rdtgroup_size_show+0x11a/0x1d0 seq_read+0xd8/0x3b0 Quoting Chen Yu's report: This is because for MB resource, the r->cache.cbm_len is zero, thus calculating size in rdtgroup_cbm_to_size() will trigger the exception. Fix this issue in the 'size' file by getting correct memory bandwidth value which is in MBps when MBA software controller is enabled or in percentage when MBA software controller is disabled. Fixes: d9b48c8 ("x86/intel_rdt: Display resource groups' allocations in bytes") Reported-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chen Yu <yu.c.chen@intel.com> Cc: "H Peter Anvin" <hpa@zytor.com> Cc: "Tony Luck" <tony.luck@intel.com> Cc: "Xiaochen Shen" <xiaochen.shen@intel.com> Link: https://lkml.kernel.org/r/20180904174614.26682-1-yu.c.chen@intel.com Link: https://lkml.kernel.org/r/1537048707-76280-3-git-send-email-fenghua.yu@intel.com
zhenyw
pushed a commit
that referenced
this issue
Oct 8, 2018
Add missing prepare/unprepare operations for fbi->clk, this fixes following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0 Enabling unprepared disp0_clk Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25 Hardware name: Marvell MMP2 (Device Tree Support) [<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14) [<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0) [<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c) [<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0) [<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c) [<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac) [<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94) [<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470) [<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124) [<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0) [<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230) [<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0) [<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0) [<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0) [<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c) [<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xd008bfb0 to 0xd008bff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace c0af40f9e2ed7cb4 ]--- Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [b.zolnierkie: enhance patch description a bit] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
zhenyw
pushed a commit
that referenced
this issue
Nov 19, 2018
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
zhenyw
pushed a commit
that referenced
this issue
Dec 29, 2018
create_ctx can be called from atomic context, hence use
GFP_ATOMIC instead of GFP_KERNEL.
[ 395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421
[ 395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl
[ 395.996564] 2 locks held by openssl/16254:
[ 396.010492] #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0
[ 396.029838] #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280
[ 396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G O 4.20.0-rc6+ #25
[ 396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017
[ 396.083537] Call Trace:
[ 396.096265] dump_stack+0x5e/0x8b
[ 396.109876] ___might_sleep+0x216/0x250
[ 396.123940] kmem_cache_alloc_trace+0x1b0/0x240
[ 396.138800] create_ctx+0x1f/0x60
[ 396.152504] tls_init+0xbd/0x280
[ 396.166135] tcp_set_ulp+0x191/0x2d0
[ 396.180035] ? tcp_set_ulp+0x2c/0x2d0
[ 396.193960] do_tcp_setsockopt.isra.44+0x148/0x9a0
[ 396.209013] __sys_setsockopt+0x7c/0xe0
[ 396.223054] __x64_sys_setsockopt+0x20/0x30
[ 396.237378] do_syscall_64+0x4a/0x180
[ 396.251200] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: df9d4a1 ("net/tls: sleeping function from invalid context")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhenyw
pushed a commit
that referenced
this issue
Jan 30, 2019
…s while handle_mm_fault do_page_fault() forgot to relinquish mmap_sem if a signal came while handling handle_mm_fault() - due to say a ctl+c or oom etc. This would later cause a deadlock by acquiring it twice. This came to light when running libc testsuite tst-tls3-malloc test but is likely also the cause for prior seen LTP failures. Using lockdep clearly showed what the issue was. | # while true; do ./tst-tls3-malloc ; done | Didn't expect signal from child: got `Segmentation fault' | ^C | ============================================ | WARNING: possible recursive locking detected | 4.17.0+ #25 Not tainted | -------------------------------------------- | tst-tls3-malloc/510 is trying to acquire lock: | 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c | |but task is already holding lock: |606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0 | | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(&mm->mmap_sem); | lock(&mm->mmap_sem); | | *** DEADLOCK *** | ------------------------------------------------------------ What the change does is not obvious (note to myself) prior code was | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_ERROR | up_read | if user_mode | return <-- lock still held, this was the BUG New code | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_RETRY | return <-- not same case as above, but still OK since | core mm already relinq lock for FAULT_RETRY | ... | | < Now falls through for bug case above > | | up_read() <-- lock relinquished Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
zhenyw
pushed a commit
that referenced
this issue
Feb 12, 2019
Eric Biggers reported: > The following commit, which went into v4.20, introduced undefined behavior when > sys_rt_sigqueueinfo() is called with sig=0: > > commit 4ce5f9c > Author: Eric W. Biederman <ebiederm@xmission.com> > Date: Tue Sep 25 12:59:31 2018 +0200 > > signal: Use a smaller struct siginfo in the kernel > > In sig_specific_sicodes(), used from known_siginfo_layout(), the expression > '1ULL << ((sig)-1)' is undefined as it evaluates to 1ULL << 4294967295. > > Reproducer: > > #include <signal.h> > #include <sys/syscall.h> > #include <unistd.h> > > int main(void) > { > siginfo_t si = { .si_code = 1 }; > syscall(__NR_rt_sigqueueinfo, 0, 0, &si); > } > > UBSAN report for v5.0-rc1: > > UBSAN: Undefined behaviour in kernel/signal.c:2946:7 > shift exponent 4294967295 is too large for 64-bit type 'long unsigned int' > CPU: 2 PID: 346 Comm: syz_signal Not tainted 5.0.0-rc1 #25 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: > __dump_stack lib/dump_stack.c:77 [inline] > dump_stack+0x70/0xa5 lib/dump_stack.c:113 > ubsan_epilogue+0xd/0x40 lib/ubsan.c:159 > __ubsan_handle_shift_out_of_bounds+0x12c/0x170 lib/ubsan.c:425 > known_siginfo_layout+0xae/0xe0 kernel/signal.c:2946 > post_copy_siginfo_from_user kernel/signal.c:3009 [inline] > __copy_siginfo_from_user+0x35/0x60 kernel/signal.c:3035 > __do_sys_rt_sigqueueinfo kernel/signal.c:3553 [inline] > __se_sys_rt_sigqueueinfo kernel/signal.c:3549 [inline] > __x64_sys_rt_sigqueueinfo+0x31/0x70 kernel/signal.c:3549 > do_syscall_64+0x4c/0x1b0 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > RIP: 0033:0x433639 > Code: c4 18 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b 27 00 00 c3 66 2e 0f 1f 84 00 00 00 00 > RSP: 002b:00007fffcb289fc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000081 > RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000433639 > RDX: 00007fffcb289fd0 RSI: 0000000000000000 RDI: 0000000000000000 > RBP: 00000000006b2018 R08: 000000000000004d R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401560 > R13: 00000000004015f0 R14: 0000000000000000 R15: 0000000000000000 I have looked at the other callers of siginmask and they all appear to in locations where sig can not be zero. I have looked at the code generation of adding an extra test against zero and gcc was able with a simple decrement instruction to combine the two tests together. So the at most adding this test cost a single cpu cycle. In practice that decrement instruction was already present as part of the mask comparison, so the only change was when the instruction was executed. So given that it is cheap, and obviously correct to update siginmask to verify the signal is not zero. Fix this issue there to avoid any future problems. Reported-by: Eric Biggers <ebiggers@kernel.org> Fixes: 4ce5f9c ("signal: Use a smaller struct siginfo in the kernel") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
zhenyw
pushed a commit
that referenced
this issue
Nov 8, 2019
The hidden aliasing-ppgtt's size is never revealed, as we only inspect the front GTT when engaged. However, we were "fixing" the hidden ppgtt to match, with the net result that we ended up leaking the unused portion on Braswell were we preallocated the entire set of top level PDP, see gen8_preallocate_top_level_pdp(). [ 26.025364] DMA-API: pci 0000:00:02.0: device driver has pending DMA allocations while released from device [count=2] [ 26.025364] One of leaked entries details: [device address=0x0000000230778000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as single] [ 26.025683] WARNING: CPU: 0 PID: 415 at kernel/dma/debug.c:894 dma_debug_device_change+0x1a4/0x1f0 [ 26.025905] Modules linked in: i915(E-) intel_powerclamp(E) nls_ascii(E) nls_cp437(E) crct10dif_pclmul(E) crc32_pclmul(E) vfat(E) crc32c_intel(E) fat(E) ghash_clmulni_intel(E) prime_numbers(E) intel_gtt(E) i2c_algo_bit(E) efi_pstore(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) evdev(E) drm(E) aesni_intel(E) glue_helper(E) crypto_simd(E) cryptd(E) intel_cstate(E) sg(E) efivars(E) pcspkr(E) video(E) button(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E) sd_mod(E) lpc_ich(E) ahci(E) mfd_core(E) i2c_i801(E) libahci(E) i2c_designware_pci(E) i2c_designware_core(E) [ 26.026613] CPU: 0 PID: 415 Comm: rmmod Tainted: G E 5.4.0-rc6+ #25 [ 26.026837] Hardware name: /, BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 26.027080] RIP: 0010:dma_debug_device_change+0x1a4/0x1f0 [ 26.027319] Code: 89 54 24 08 e8 ad 60 62 00 48 8b 54 24 08 48 89 c6 41 57 4d 89 e9 49 89 d8 44 89 f1 41 54 48 c7 c7 e0 61 06 82 e8 c1 aa f5 ff <0f> 0b 5a 59 48 83 3c 24 00 0f 85 97 26 00 00 8b 05 77 47 92 01 85 [ 26.027600] RSP: 0018:ffff888228d2fcc8 EFLAGS: 00010282 [ 26.027831] RAX: 0000000000000000 RBX: 0000000230778000 RCX: 0000000000000000 [ 26.028053] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffed10451a5f8f [ 26.028279] RBP: ffff88823480c0b0 R08: 0000000000000001 R09: ffffed1046e83eb1 [ 26.028500] R10: ffffed1046e83eb0 R11: ffff88823741f587 R12: ffffffff82067340 [ 26.028725] R13: 0000000000001000 R14: 0000000000000002 R15: ffffffff82067480 [ 26.028952] FS: 00007fdf3ed174c0(0000) GS:ffff888237400000(0000) knlGS:0000000000000000 [ 26.029185] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.029405] CR2: 000055e211109030 CR3: 0000000230139000 CR4: 00000000001006f0 [ 26.029622] Call Trace: [ 26.029846] notifier_call_chain+0x67/0xa0 [ 26.030076] blocking_notifier_call_chain+0x5a/0x80 [ 26.030305] device_release_driver_internal+0x20d/0x260 [ 26.030535] driver_detach+0x7b/0xe1 [ 26.030761] bus_remove_driver+0x8c/0x153 [ 26.030993] pci_unregister_driver+0x2d/0xf0 [ 26.032603] i915_exit+0x16/0x1c [i915] Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 1eda701 ("drm/i915/gtt: Recursive cleanup for gen8") References: c082afa ("drm/i915: Move aliasing_ppgtt underneath its i915_ggtt") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106221223.7437-1-chris@chris-wilson.co.uk
zhenyw
pushed a commit
that referenced
this issue
Nov 15, 2019
The hidden aliasing-ppgtt's size is never revealed, as we only inspect the front GTT when engaged. However, we were "fixing" the hidden ppgtt to match, with the net result that we ended up leaking the unused portion on Braswell were we preallocated the entire set of top level PDP, see gen8_preallocate_top_level_pdp(). [ 26.025364] DMA-API: pci 0000:00:02.0: device driver has pending DMA allocations while released from device [count=2] [ 26.025364] One of leaked entries details: [device address=0x0000000230778000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as single] [ 26.025683] WARNING: CPU: 0 PID: 415 at kernel/dma/debug.c:894 dma_debug_device_change+0x1a4/0x1f0 [ 26.025905] Modules linked in: i915(E-) intel_powerclamp(E) nls_ascii(E) nls_cp437(E) crct10dif_pclmul(E) crc32_pclmul(E) vfat(E) crc32c_intel(E) fat(E) ghash_clmulni_intel(E) prime_numbers(E) intel_gtt(E) i2c_algo_bit(E) efi_pstore(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) evdev(E) drm(E) aesni_intel(E) glue_helper(E) crypto_simd(E) cryptd(E) intel_cstate(E) sg(E) efivars(E) pcspkr(E) video(E) button(E) efivarfs(E) ip_tables(E) x_tables(E) autofs4(E) sd_mod(E) lpc_ich(E) ahci(E) mfd_core(E) i2c_i801(E) libahci(E) i2c_designware_pci(E) i2c_designware_core(E) [ 26.026613] CPU: 0 PID: 415 Comm: rmmod Tainted: G E 5.4.0-rc6+ #25 [ 26.026837] Hardware name: /, BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 26.027080] RIP: 0010:dma_debug_device_change+0x1a4/0x1f0 [ 26.027319] Code: 89 54 24 08 e8 ad 60 62 00 48 8b 54 24 08 48 89 c6 41 57 4d 89 e9 49 89 d8 44 89 f1 41 54 48 c7 c7 e0 61 06 82 e8 c1 aa f5 ff <0f> 0b 5a 59 48 83 3c 24 00 0f 85 97 26 00 00 8b 05 77 47 92 01 85 [ 26.027600] RSP: 0018:ffff888228d2fcc8 EFLAGS: 00010282 [ 26.027831] RAX: 0000000000000000 RBX: 0000000230778000 RCX: 0000000000000000 [ 26.028053] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffed10451a5f8f [ 26.028279] RBP: ffff88823480c0b0 R08: 0000000000000001 R09: ffffed1046e83eb1 [ 26.028500] R10: ffffed1046e83eb0 R11: ffff88823741f587 R12: ffffffff82067340 [ 26.028725] R13: 0000000000001000 R14: 0000000000000002 R15: ffffffff82067480 [ 26.028952] FS: 00007fdf3ed174c0(0000) GS:ffff888237400000(0000) knlGS:0000000000000000 [ 26.029185] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.029405] CR2: 000055e211109030 CR3: 0000000230139000 CR4: 00000000001006f0 [ 26.029622] Call Trace: [ 26.029846] notifier_call_chain+0x67/0xa0 [ 26.030076] blocking_notifier_call_chain+0x5a/0x80 [ 26.030305] device_release_driver_internal+0x20d/0x260 [ 26.030535] driver_detach+0x7b/0xe1 [ 26.030761] bus_remove_driver+0x8c/0x153 [ 26.030993] pci_unregister_driver+0x2d/0xf0 [ 26.032603] i915_exit+0x16/0x1c [i915] Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 1eda701 ("drm/i915/gtt: Recursive cleanup for gen8") References: c082afa ("drm/i915: Move aliasing_ppgtt underneath its i915_ggtt") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106221223.7437-1-chris@chris-wilson.co.uk (cherry picked from commit 2b0a4fc) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
zhenyw
pushed a commit
that referenced
this issue
Jan 10, 2020
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:
ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!
This happens in:
static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here
Namely:
__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!
Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.
Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.
This approach was adopted from the commit 72139df ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09 ("chardev: add
helper function to register char devs with a struct device").
Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u
Analyzed-by: Stephen Johnston <sjohnsto@redhat.com>
Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhenyw
pushed a commit
that referenced
this issue
Sep 8, 2020
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Close it and focus on the latest kernel. |
zhenyw
pushed a commit
that referenced
this issue
Oct 12, 2020
Patch series "mm: fix memory to node bad links in sysfs", v3. Sometimes, firmware may expose interleaved memory layout like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] In that case, we can see memory blocks assigned to multiple nodes in sysfs: $ ls -l /sys/devices/system/memory/memory21 total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 -rw-r--r-- 1 root root 65536 Aug 24 05:27 online -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index drwxr-xr-x 2 root root 0 Aug 24 05:27 power -r--r--r-- 1 root root 65536 Aug 24 05:27 removable -rw-r--r-- 1 root root 65536 Aug 24 05:27 state lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones The same applies in the node's directory with a memory21 link in both the node1 and node2's directory. This is wrong but doesn't prevent the system to run. However when later, one of these memory blocks is hot-unplugged and then hot-plugged, the system is detecting an inconsistency in the sysfs layout and a BUG_ON() is raised: kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This has been seen on PowerPC LPAR. The root cause of this issue is that when node's memory is registered, the range used can overlap another node's range, thus the memory block is registered to multiple nodes in sysfs. There are two issues here: (a) The sysfs memory and node's layouts are broken due to these multiple links (b) The link errors in link_mem_sections() should not lead to a system panic. To address (a) register_mem_sect_under_node should not rely on the system state to detect whether the link operation is triggered by a hot plug operation or not. This is addressed by the patches 1 and 2 of this series. Issue (b) will be addressed separately. This patch (of 2): The memmap_context enum is used to detect whether a memory operation is due to a hot-add operation or happening at boot time. Make it general to the hotplug operation and rename it as meminit_context. There is no functional change introduced by this patch Suggested-by: David Hildenbrand <david@redhat.com> Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhenyw
pushed a commit
that referenced
this issue
Oct 12, 2020
In register_mem_sect_under_node() the system_state's value is checked to detect whether the call is made during boot time or during an hot-plug operation. Unfortunately, that check against SYSTEM_BOOTING is wrong because regular memory is registered at SYSTEM_SCHEDULING state. In addition, memory hot-plug operation can be triggered at this system state by the ACPI [1]. So checking against the system state is not enough. The consequence is that on system with interleaved node's ranges like this: Early memory node ranges node 1: [mem 0x0000000000000000-0x000000011fffffff] node 2: [mem 0x0000000120000000-0x000000014fffffff] node 1: [mem 0x0000000150000000-0x00000001ffffffff] node 0: [mem 0x0000000200000000-0x000000048fffffff] node 2: [mem 0x0000000490000000-0x00000007ffffffff] This can be seen on PowerPC LPAR after multiple memory hot-plug and hot-unplug operations are done. At the next reboot the node's memory ranges can be interleaved and since the call to link_mem_sections() is made in topology_init() while the system is in the SYSTEM_SCHEDULING state, the node's id is not checked, and the sections registered to multiple nodes: $ ls -l /sys/devices/system/memory/memory21/node* total 0 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1 lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2 In that case, the system is able to boot but if later one of theses memory blocks is hot-unplugged and then hot-plugged, the sysfs inconsistency is detected and this is triggering a BUG_ON(): kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4 CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25 Call Trace: add_memory_resource+0x23c/0x340 (unreliable) __add_memory+0x5c/0xf0 dlpar_add_lmb+0x1b4/0x500 dlpar_memory+0x1f8/0xb80 handle_dlpar_errorlog+0xc0/0x190 dlpar_store+0x198/0x4a0 kobj_attr_store+0x30/0x50 sysfs_kf_write+0x64/0x90 kernfs_fop_write+0x1b0/0x290 vfs_write+0xe8/0x290 ksys_write+0xdc/0x130 system_call_exception+0x160/0x270 system_call_common+0xf0/0x27c This patch addresses the root cause by not relying on the system_state value to detect whether the call is due to a hot-plug operation. An extra parameter is added to link_mem_sections() detailing whether the operation is due to a hot-plug operation. [1] According to Oscar Salvador, using this qemu command line, ACPI memory hotplug operations are raised at SYSTEM_SCHEDULING state: $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \ -m size=$MEM,slots=255,maxmem=4294967296k \ -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \ -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \ -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \ -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \ -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \ -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \ -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \ -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \ Fixes: 4fbce63 ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhenyw
pushed a commit
that referenced
this issue
Nov 26, 2020
This fix is for a failure that occurred in the DWARF unwind perf test.
Stack unwinders may probe memory when looking for frames.
Memory sanitizer will poison and track uninitialized memory on the
stack, and on the heap if the value is copied to the heap.
This can lead to false memory sanitizer failures for the use of an
uninitialized value.
Avoid this problem by removing the poison on the copied stack.
The full msan failure with track origins looks like:
==2168==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22
#1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13
#2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#24 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10
#1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13
#2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18
#3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#25 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2
#2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9
#3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6
#4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#17 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events'
#0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445
SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandeep Dasgupta <sdasgup@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
zhenyw
pushed a commit
that referenced
this issue
Feb 22, 2021
We have the following potential deadlock condition: ======================================================== WARNING: possible irq lock inversion dependency detected 5.10.0-rc2+ #25 Not tainted -------------------------------------------------------- swapper/3/0 just changed the state of lock: ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200 but this lock took another, HARDIRQ-READ-unsafe lock in the past: (&trig->leddev_list_lock){.+.?}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trig->leddev_list_lock); local_irq_disable(); lock(&host->lock); lock(&trig->leddev_list_lock); <Interrupt> lock(&host->lock); *** DEADLOCK *** no locks held by swapper/3/0. the shortest dependencies between 2nd lock and 1st lock: -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 { HARDIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 IN-SOFTIRQ-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 kbd_bh+0x9e/0xc0 tasklet_action_common.constprop.0+0xe9/0x100 tasklet_action+0x22/0x30 __do_softirq+0xcc/0x46d run_ksoftirqd+0x3f/0x70 smpboot_thread_fn+0x116/0x1f0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 SOFTIRQ-ON-R at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 INITIAL READ USE at: lock_acquire+0x15f/0x420 _raw_read_lock+0x42/0x90 led_trigger_event+0x2b/0x70 rfkill_global_led_trigger_worker+0x94/0xb0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83da4c00>] __key.0+0x0/0x10 ... acquired at: _raw_read_lock+0x42/0x90 led_trigger_blink_oneshot+0x3b/0x90 ledtrig_disk_activity+0x3c/0xa0 ata_qc_complete+0x26/0x450 ata_do_link_abort+0xa3/0xe0 ata_port_freeze+0x2e/0x40 ata_hsm_qc_complete+0x94/0xa0 ata_sff_hsm_move+0x177/0x7a0 ata_sff_pio_task+0xc7/0x1b0 process_one_work+0x240/0x560 worker_thread+0x58/0x3d0 kthread+0x151/0x170 ret_from_fork+0x1f/0x30 -> (&host->lock){-...}-{2:2} ops: 69 { IN-HARDIRQ-W at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab INITIAL USE at: lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_dev_init+0x54/0xe0 ata_link_init+0x8b/0xd0 ata_port_alloc+0x1f1/0x210 ata_host_alloc+0xf1/0x130 ata_host_alloc_pinfo+0x14/0xb0 ata_pci_sff_prepare_host+0x41/0xa0 ata_pci_bmdma_prepare_host+0x14/0x30 piix_init_one+0x21f/0x600 local_pci_probe+0x48/0x80 pci_device_probe+0x105/0x1c0 really_probe+0x221/0x490 driver_probe_device+0xe9/0x160 device_driver_attach+0xb2/0xc0 __driver_attach+0x91/0x150 bus_for_each_dev+0x81/0xc0 driver_attach+0x1e/0x20 bus_add_driver+0x138/0x1f0 driver_register+0x91/0xf0 __pci_register_driver+0x73/0x80 piix_init+0x1e/0x2e do_one_initcall+0x5f/0x2d0 kernel_init_freeable+0x26f/0x2cf kernel_init+0xe/0x113 ret_from_fork+0x1f/0x30 } ... key at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10 ... acquired at: __lock_acquire+0x9da/0x2370 lock_acquire+0x15f/0x420 _raw_spin_lock_irqsave+0x52/0xa0 ata_bmdma_interrupt+0x27/0x200 __handle_irq_event_percpu+0xd5/0x2b0 handle_irq_event+0x57/0xb0 handle_edge_irq+0x8c/0x230 asm_call_irq_on_stack+0xf/0x20 common_interrupt+0x100/0x1c0 asm_common_interrupt+0x1e/0x40 native_safe_halt+0xe/0x10 arch_cpu_idle+0x15/0x20 default_idle_call+0x59/0x1c0 do_idle+0x22c/0x2c0 cpu_startup_entry+0x20/0x30 start_secondary+0x11d/0x150 secondary_startup_64_no_verify+0xa6/0xab This lockdep splat is reported after: commit e918188 ("locking: More accurate annotations for read_lock()") To clarify: - read-locks are recursive only in interrupt context (when in_interrupt() returns true) - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call write_lock(&trig->leddev_list_lock) that would be blocked by CPU0 that holds trig->leddev_list_lock in read-mode - when CPU1 (ata_ac_complete()) tries to read-lock trig->leddev_list_lock, it would be blocked by the write-lock waiter on CPU2 (because we are not in interrupt context, so the read-lock is not recursive) - at this point if an interrupt happens on CPU0 and ata_bmdma_interrupt() is executed it will try to acquire host->lock, that is held by CPU1, that is currently blocked by CPU2, so: * CPU0 blocked by CPU1 * CPU1 blocked by CPU2 * CPU2 blocked by CPU0 *** DEADLOCK *** The deadlock scenario is better represented by the following schema (thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the detailed explanation of the deadlock condition): CPU 0: CPU 1: CPU 2: ----- ----- ----- led_trigger_event(): read_lock(&trig->leddev_list_lock); <workqueue> ata_hsm_qc_complete(): spin_lock_irqsave(&host->lock); write_lock(&trig->leddev_list_lock); ata_port_freeze(): ata_do_link_abort(): ata_qc_complete(): ledtrig_disk_activity(): led_trigger_blink_oneshot(): read_lock(&trig->leddev_list_lock); // ^ not in in_interrupt() context, so could get blocked by CPU 2 <interrupt> ata_bmdma_interrupt(): spin_lock_irqsave(&host->lock); Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so that no interrupt can happen in between, preventing the deadlock condition. Apply the same change to led_trigger_blink_setup() as well, since the same deadlock scenario can also happen in power_supply_update_bat_leds() -> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context), and potentially prevent other similar usages. Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/ Fixes: eb25cb9 ("leds: convert IDE trigger to common disk trigger") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
zhenyw
pushed a commit
that referenced
this issue
Mar 29, 2021
After commit 997acaf (lockdep: report broken irq restoration), the guest splatting below during boot: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 169 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x26/0x30 Modules linked in: hid_generic usbhid hid CPU: 1 PID: 169 Comm: systemd-udevd Not tainted 5.11.0+ #25 RIP: 0010:warn_bogus_irq_restore+0x26/0x30 Call Trace: kvm_wait+0x76/0x90 __pv_queued_spin_lock_slowpath+0x285/0x2e0 do_raw_spin_lock+0xc9/0xd0 _raw_spin_lock+0x59/0x70 lockref_get_not_dead+0xf/0x50 __legitimize_path+0x31/0x60 legitimize_root+0x37/0x50 try_to_unlazy_next+0x7f/0x1d0 lookup_fast+0xb0/0x170 path_openat+0x165/0x9b0 do_filp_open+0x99/0x110 do_sys_openat2+0x1f1/0x2e0 do_sys_open+0x5c/0x80 __x64_sys_open+0x21/0x30 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae The new consistency checking, expects local_irq_save() and local_irq_restore() to be paired and sanely nested, and therefore expects local_irq_restore() to be called with irqs disabled. The irqflags handling in kvm_wait() which ends up doing: local_irq_save(flags); safe_halt(); local_irq_restore(flags); instead triggers it. This patch fixes it by using local_irq_disable()/enable() directly. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1615791328-2735-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
zhiwang1
pushed a commit
that referenced
this issue
Jan 13, 2022
After commit d3256ef ("veth: allow enabling NAPI even without XDP"), if GRO is enabled on a veth device and TSO is disabled on the peer device, TCP skbs will go through the NAPI callback. If there is no XDP program attached, the veth code does not perform any share check, and shared/cloned skbs could enter the GRO engine. Ignat reported a BUG triggered later-on due to the above condition: [ 53.970529][ C1] kernel BUG at net/core/skbuff.c:3574! [ 53.981755][ C1] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.982634][ C1] CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 5.16.0-rc5+ #25 [ 53.982634][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 53.982634][ C1] RIP: 0010:skb_shift+0x13ef/0x23b0 [ 53.982634][ C1] Code: ea 03 0f b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 41 0c 00 00 41 80 7f 02 00 4d 8d b5 d0 00 00 00 0f 85 74 f5 ff ff <0f> 0b 4d 8d 77 20 be 04 00 00 00 4c 89 44 24 78 4c 89 f7 4c 89 8c [ 53.982634][ C1] RSP: 0018:ffff8881008f7008 EFLAGS: 00010246 [ 53.982634][ C1] RAX: 0000000000000000 RBX: ffff8881180b4c80 RCX: 0000000000000000 [ 53.982634][ C1] RDX: 0000000000000002 RSI: ffff8881180b4d3c RDI: ffff88810bc9cac2 [ 53.982634][ C1] RBP: ffff8881008f70b8 R08: ffff8881180b4cf4 R09: ffff8881180b4cf0 [ 53.982634][ C1] R10: ffffed1022999e5c R11: 0000000000000002 R12: 0000000000000590 [ 53.982634][ C1] R13: ffff88810f940c80 R14: ffff88810f940d50 R15: ffff88810bc9cac0 [ 53.982634][ C1] FS: 0000000000000000(0000) GS:ffff888235880000(0000) knlGS:0000000000000000 [ 53.982634][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.982634][ C1] CR2: 00007ff5f9b86680 CR3: 0000000108ce8004 CR4: 0000000000170ee0 [ 53.982634][ C1] Call Trace: [ 53.982634][ C1] <TASK> [ 53.982634][ C1] tcp_sacktag_walk+0xaba/0x18e0 [ 53.982634][ C1] tcp_sacktag_write_queue+0xe7b/0x3460 [ 53.982634][ C1] tcp_ack+0x2666/0x54b0 [ 53.982634][ C1] tcp_rcv_established+0x4d9/0x20f0 [ 53.982634][ C1] tcp_v4_do_rcv+0x551/0x810 [ 53.982634][ C1] tcp_v4_rcv+0x22ed/0x2ed0 [ 53.982634][ C1] ip_protocol_deliver_rcu+0x96/0xaf0 [ 53.982634][ C1] ip_local_deliver_finish+0x1e0/0x2f0 [ 53.982634][ C1] ip_sublist_rcv_finish+0x211/0x440 [ 53.982634][ C1] ip_list_rcv_finish.constprop.0+0x424/0x660 [ 53.982634][ C1] ip_list_rcv+0x2c8/0x410 [ 53.982634][ C1] __netif_receive_skb_list_core+0x65c/0x910 [ 53.982634][ C1] netif_receive_skb_list_internal+0x5f9/0xcb0 [ 53.982634][ C1] napi_complete_done+0x188/0x6e0 [ 53.982634][ C1] gro_cell_poll+0x10c/0x1d0 [ 53.982634][ C1] __napi_poll+0xa1/0x530 [ 53.982634][ C1] net_rx_action+0x567/0x1270 [ 53.982634][ C1] __do_softirq+0x28a/0x9ba [ 53.982634][ C1] run_ksoftirqd+0x32/0x60 [ 53.982634][ C1] smpboot_thread_fn+0x559/0x8c0 [ 53.982634][ C1] kthread+0x3b9/0x490 [ 53.982634][ C1] ret_from_fork+0x22/0x30 [ 53.982634][ C1] </TASK> Address the issue by skipping the GRO stage for shared or cloned skbs. To reduce the chance of OoO, try to unclone the skbs before giving up. v1 -> v2: - use avoid skb_copy and fallback to netif_receive_skb - Eric Reported-by: Ignat Korchagin <ignat@cloudflare.com> Fixes: d3256ef ("veth: allow enabling NAPI even without XDP") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/b5f61c5602aab01bac8d711d8d1bfab0a4817db7.1640197544.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
zhiwang1
pushed a commit
that referenced
this issue
Mar 7, 2022
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090
RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00
R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0
R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhenyw
pushed a commit
that referenced
this issue
Nov 28, 2022
UBSAN complains about array-index-out-of-bounds: [ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41 [ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]' [ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu [ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010 [ 1.980718] kernel: Call Trace: [ 1.980721] kernel: <TASK> [ 1.980723] kernel: show_stack+0x52/0x58 [ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f [ 1.980734] kernel: dump_stack+0x10/0x12 [ 1.980736] kernel: ubsan_epilogue+0x9/0x45 [ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49 [ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci] [ 1.980748] kernel: ata_qc_issue+0x135/0x240 [ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580 [ 1.980754] kernel: ? vprintk_default+0x1d/0x20 [ 1.980759] kernel: ata_exec_internal+0x67/0xa0 [ 1.980762] kernel: sata_pmp_read+0x8d/0xc0 [ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90 [ 1.980768] kernel: sata_pmp_attach+0x8b/0x310 [ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0 [ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30 [ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci] [ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci] [ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci] [ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0 [ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560 [ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40 [ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci] [ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600 [ 1.980810] kernel: ata_scsi_error+0x9c/0xd0 [ 1.980813] kernel: scsi_error_handler+0xa1/0x180 [ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0 [ 1.980820] kernel: kthread+0x12a/0x150 [ 1.980823] kernel: ? set_kthread_struct+0x50/0x50 [ 1.980826] kernel: ret_from_fork+0x22/0x30 [ 1.980831] kernel: </TASK> This happens because sata_pmp_init_links() initialize link->pmp up to SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array. I can't find the maximum Enclosure Management ports specified in AHCI spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier Information" can utilize 4 bits, which implies it can support up to 16 ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the issue. BugLink: https://bugs.launchpad.net/bugs/1970074 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Hello,
I just started using my nuc as low cost and efficient vm host and stumpled over the feature gvt-g. I read your wiki, but I couldn't wrap my head around, how to use it with xenserver.
So far I installed the free xen-server image, created some vms, etc ...
I followed the wiki and compiled xengt withing in a fresh ubuntu 16.04.4 or should I do this in the xenserver distro?
I am a little confused right now and it would be great if someone could resolve my issue 👍
Thank you very much.
BTW great work!!!
Greetings, Thomas
The text was updated successfully, but these errors were encountered: