[SYCL] Fix group local memory sharing issue #3489
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
mlychkov
requested review from
AaronBallman,
elizabethandrews and
premanandrao
as code owners
Group local memory functions depend on inlining pass. When all optimizations are disabled then those functions are not inlined. If a user adds several group local memory calls with the same template argument then only one group local memory function is specialized and then one memory buffer is allocated. Thus all variables that save a result of the group local memory call point to the same buffer. Enable AlwaysInliner pass even when all llvm passes are disabled as a workaround. A More accurate solution with call graph analysis will be added later. Signed-off-by: Mikhail Lychkov <mikhail.lychkov@intel.com>
mlychkov
force-pushed
the
private/mlychkov/fix_gv_creation_for_same_type
branch
from
14453fd to
c019149
Compare
AaronBallman
reviewed
Apr 5, 2021
Co-authored-by: Aaron Ballman <aaron@aaronballman.com>
E2E test for this fix is added here: intel/llvm-test-suite#217 |
|
Is this going to negatively affect targets that rely on early optimizations being off? |
FE changes should be tested with FE tests rather than only with end to end tests, shouldn't they? (FE developers will more quickly notice when they regress behavior because they're going to run the FE tests when making changes but aren't likely to run the E2E tests as often.) |
MrSidims
reviewed
Apr 5, 2021
Signed-off-by: Mikhail Lychkov <mikhail.lychkov@intel.com>
It isn't actually. And this is the cause of the issue with one instance of global variable for two calls of group_local_memory<> with the same template parameter type. I'm not 100% sure that it won't affect anything, but effect will be only in inlining device functions that are marked with always_inline attribute. If they are marked with this attribute then this is an expected result of a compilation and it shouldn't break correctness of a program. |
|
It was found out that enabling of AlwaysInliner pass may affect some targets. I set this PR as draft temporary until we find more robust solution. |
Move passes to CreatePasses function. NOTE: `createSYCLLowerWGLocalMemoryLegacyPass` is not added to the the pipeline if CodeGenOpts.DisableLLVMPasses is ON.
This reverts commit 40b659d.
mohammadfawaz
approved these changes
Apr 12, 2021
|
@elizabethandrews @premanandrao Could you please review this fix? |
|
@mlychkov -- I'm a bit confused. #3489 (comment) said you were looking for a more robust solution, a bunch of changes were made, and then reverted back to the original state in 5e3e47f. Was the more robust solution not needed? |
Sorry for a confusion. We discussed possible alternative solutions and agreed that the first fix is the most appropriate for now because it doesn't require additional changes on backends side. |
AaronBallman
approved these changes
Apr 12, 2021
alexbatashev
pushed a commit
to alexbatashev/llvm
that referenced
this pull request
Apr 14, 2021
* upstream/sycl: (39 commits) [CI] Switch to default clang-format version. (intel#3540) [Driver][NFC] Cleanup some option setting for SYCL offload (intel#3542) [GitHub Actions] Update main branch sync schedule [SYCL][NFC] Fix potential namespace conflicts with PSTL in tuple.hpp (intel#3541) [SYCL] Bump sycl library minor version (intel#3538) [SYCL][CUDA] Implemented cuda_piextUSMEnqueueMemAdvise (intel#3365) [SYCL][FPGA] Add mutual diagnostic of max_concurrency attribute in conjunction of disable_loop_pipelining attribute (intel#3512) [SYCL] [MATRIX] Enable joint_matrix_load, joint_matrix_store, and joint_matrix_mad for AMX (intel#3503) [ESIMD] Skip rewriting functions used through function pointers (intel#3527) [SYCL] Fix address space for spec constants buffer (intel#3521) [SYCL] Correct the tablegen for checking mutually exclusive stmt attrs (intel#3519) [SYCL][PI][L0][NFC] Refactor setting of LastCommandEvent (intel#3528) [SYCL] Fix group local memory sharing issue (intel#3489) [SYCL][NFC] Fix post-commit failure (intel#3532) [SYCL][Doc] Remove extension mechanism (intel#3526) [SYCL] Move sycl.hpp in install directory and adjust driver to match (intel#3523) [SYCL][ESIMD] Update ESIMD docs to address recent user comments: (intel#3516) [NFCI][SYCL] Correct -fdeclare-spirv-builtins to use marshalling (intel#3515) [SYCL] Rework MarkDevice and children (intel#3475) [SYCL] Fix StringLiteral Ctor issue from intel#3504. (intel#3520) ...
sarnex
pushed a commit
that referenced
this pull request
Apr 1, 2025
…17770) Bumps the llvm-docs-requirements group in /llvm/docs with 7 updates: | Package | From | To | | --- | --- | --- | | [babel](https://github.com/python-babel/babel) | `2.16.0` | `2.17.0` | | [beautifulsoup4](https://www.crummy.com/software/BeautifulSoup/bs4/) | `4.12.3` | `4.13.3` | | [certifi](https://github.com/certifi/python-certifi) | `2024.8.30` | `2025.1.31` | | [charset-normalizer](https://github.com/jawah/charset_normalizer) | `3.4.0` | `3.4.1` | | [pygments](https://github.com/pygments/pygments) | `2.18.0` | `2.19.1` | | [sphinx-reredirects](https://github.com/documatt/sphinx-reredirects) | `0.1.2` | `0.1.6` | | [urllib3](https://github.com/urllib3/urllib3) | `2.2.3` | `2.3.0` | Updates `babel` from 2.16.0 to 2.17.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/python-babel/babel/releases">babel's releases</a>.</em></p> <blockquote> <h2>v2.17.0</h2> <p>Happy 2025! This release is being made from FOSDEM 2025, in Brussels, Belgium. 🇧🇪</p> <p>Thank you to all contributors, new and old, and here's to another great year of internationalization and localization!</p> <hr /> <p>The changelog below is auto-generated by GitHub.</p> <p>Please see <a href="https://github.com/python-babel/babel/blob/b50a1d2186c20f3359f7e10853d2b2225a46ed40/CHANGES.rst">CHANGELOG.rst</a> for additional details.</p> <hr /> <h2>What's Changed</h2> <ul> <li>Fix deprecation warnings for <code>datetime.utcnow()</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1119">python-babel/babel#1119</a></li> <li>Enclose white spaces in references by <a href="https://github.com/Dunedan"><code>@Dunedan</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1105">python-babel/babel#1105</a></li> <li>Replace <code>str.index</code> with <code>str.find</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1130">python-babel/babel#1130</a></li> <li>Replace more alternate characters in <code>format_skeleton</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1122">python-babel/babel#1122</a></li> <li>Fix extracted lineno with nested calls by <a href="https://github.com/dylankiss"><code>@dylankiss</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1126">python-babel/babel#1126</a></li> <li>"Deleted duplicate code in test" by <a href="https://github.com/mattdiaz007"><code>@mattdiaz007</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1138">python-babel/babel#1138</a></li> <li>Fix of list index out of range error in PoFileParser.add_message when translations is empty by <a href="https://github.com/gabe-sherman"><code>@gabe-sherman</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1135">python-babel/babel#1135</a></li> <li>Make seconds optional in <code>parse_time</code> time formats by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1141">python-babel/babel#1141</a></li> <li>Mark <code>wraptext</code> deprecated; use <code>TextWrapper</code> directly in <code>write_po</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1140">python-babel/babel#1140</a></li> <li>Fix the way obsolete messages are stored by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1132">python-babel/babel#1132</a></li> <li>Replace <code>OrderedDict</code> with just <code>dict</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1149">python-babel/babel#1149</a></li> <li>Use CLDR 46 by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1145">python-babel/babel#1145</a></li> <li>Update CI to use python 3.13 and Ubuntu 24.04 by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1153">python-babel/babel#1153</a></li> <li>Adjust docs/conf.py to add compatibility with sphinx 8 by <a href="https://github.com/hrnciar"><code>@hrnciar</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1155">python-babel/babel#1155</a></li> <li>Allow specifying an explicit format in parse_date/parse_time by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1131">python-babel/babel#1131</a></li> <li>Simplify <code>read_mo</code> logic regarding <code>catalog.charset</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1148">python-babel/babel#1148</a></li> <li>Bump CI/tool versions by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1160">python-babel/babel#1160</a></li> <li>fix: check_and_call_extract_file uses the first matching method and options, instead of the first matching method and last matching options by <a href="https://github.com/jpmckinney"><code>@jpmckinney</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1121">python-babel/babel#1121</a></li> <li>Prevent wrapping file locations containing white space by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1120">python-babel/babel#1120</a></li> <li>Add tzdata as dev dependency and sync with tox.ini by <a href="https://github.com/wandrew004"><code>@wandrew004</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1159">python-babel/babel#1159</a></li> <li>Support short and narrow formats for format_timedelta when using <code>add_direction</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1163">python-babel/babel#1163</a></li> <li>Improve handling for <code>locale=None</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1164">python-babel/babel#1164</a></li> <li>Use <code>pytest.raises(match=...)</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1166">python-babel/babel#1166</a></li> <li>Strip extra leading slashes in <code>/etc/localtime</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1165">python-babel/babel#1165</a></li> <li>Remove redundant assignment in <code>Catalog.__setitem__</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1167">python-babel/babel#1167</a></li> <li>Small cleanups by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1170">python-babel/babel#1170</a></li> <li>Small test cleanup by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1172">python-babel/babel#1172</a></li> <li>Add <code>Message.python_brace_format</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1169">python-babel/babel#1169</a></li> <li>Import <code>Literal</code> from the typing module by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1175">python-babel/babel#1175</a></li> <li>Prefer LC_MONETARY when formatting currencies by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1173">python-babel/babel#1173</a></li> <li>Fix dates formatting <code>Y</code>, <code>w</code> and <code>W</code> symbols for week-numbering by <a href="https://github.com/jun66j5"><code>@jun66j5</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1179">python-babel/babel#1179</a></li> <li>Increase test coverage of the <code>python_format</code> checker by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1176">python-babel/babel#1176</a></li> <li>Prepare for 2.17.0 by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1182">python-babel/babel#1182</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/Dunedan"><code>@Dunedan</code></a> made their first contribution in <a href="https://redirect.github.com/python-babel/babel/pull/1105">python-babel/babel#1105</a></li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/python-babel/babel/blob/master/CHANGES.rst">babel's changelog</a>.</em></p> <blockquote> <h2>Version 2.17.0</h2> <p>Happy 2025! This release is being made from FOSDEM 2025, in Brussels, Belgium.</p> <p>Thank you to all contributors, new and old, and here's to another great year of internationalization and localization!</p> <p>Features</p> <pre><code> * CLDR: Babel now uses CLDR 46, by @tomasr8 in :gh:`1145` * Dates: Allow specifying an explicit format in parse_date/parse_time by @tomasr8 in :gh:`1131` * Dates: More alternate characters are now supported by `format_skeleton`. By @tomasr8 in :gh:`1122` * Dates: Support short and narrow formats for format_timedelta when using `add_direction`, by @akx in :gh:`1163` * Messages: .po files now enclose white spaces in filenames like GNU gettext does. By @Dunedan in :gh:`1105`, and @tomasr8 in :gh:`1120` * Messages: Initial support for `Message.python_brace_format`, by @tomasr8 in :gh:`1169` * Numbers: LC_MONETARY is now preferred when formatting currencies, by @akx in :gh:`1173` <p>Bugfixes<br /> </code></pre></p> <ul> <li>Dates: Make seconds optional in <code>parse_time</code> time formats by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1141</code></li> <li>Dates: Replace <code>str.index</code> with <code>str.find</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1130</code></li> <li>Dates: Strip extra leading slashes in <code>/etc/localtime</code> by <a href="https://github.com/akx"><code>@akx</code></a> in :gh:<code>1165</code></li> <li>Dates: Week numbering and formatting of dates with week numbers was repaired by <a href="https://github.com/jun66j5"><code>@jun66j5</code></a> in :gh:<code>1179</code></li> <li>General: Improve handling for <code>locale=None</code> by <a href="https://github.com/akx"><code>@akx</code></a> in :gh:<code>1164</code></li> <li>General: Remove redundant assignment in <code>Catalog.__setitem__</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1167</code></li> <li>Messages: Fix extracted lineno with nested calls, by <a href="https://github.com/dylankiss"><code>@dylankiss</code></a> in :gh:<code>1126</code></li> <li>Messages: Fix of list index out of range when translations is empty, by <a href="https://github.com/gabe-sherman"><code>@gabe-sherman</code></a> in :gh:<code>1135</code></li> <li>Messages: Fix the way obsolete messages are stored by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1132</code></li> <li>Messages: Simplify <code>read_mo</code> logic regarding <code>catalog.charset</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1148</code></li> <li>Messages: Use the first matching method & options, rather than first matching method & last options, by <a href="https://github.com/jpmckinney"><code>@jpmckinney</code></a> in :gh:<code>1121</code></li> </ul> <p>Deprecation and compatibility</p> <pre><code> * Dates: Fix deprecation warnings for `datetime.utcnow()` by @tomasr8 in :gh:`1119` * Docs: Adjust docs/conf.py to add compatibility with sphinx 8 by @hrnciar in :gh:`1155` * General: Import `Literal` from the typing module by @tomasr8 in :gh:`1175` * General: Replace `OrderedDict` with just `dict` by @tomasr8 in :gh:`1149` * Messages: Mark `wraptext` deprecated; use `TextWrapper` directly in `write_po` by @akx in :gh:`1140` <p>Infrastructure</p> <pre><code> * Add tzdata as dev dependency and sync with tox.ini by @wandrew004 in :gh:`1159` * Duplicate test code was deleted by @mattdiaz007 in :gh:`1138` * Increase test coverage of the `python_format` checker by @tomasr8 in :gh:`1176` * Small cleanups by @akx in :gh:`1160`, :gh:`1166`, :gh:`1170` and :gh:`1172` &lt;/tr&gt;&lt;/table&gt; </code></pre> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/python-babel/babel/commit/b50a1d2186c20f3359f7e10853d2b2225a46ed40"><code>b50a1d2</code></a> Prepare for 2.17.0 (<a href="https://redirect.github.com/python-babel/babel/issues/1182">#1182</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/5f117b2689573aa98acc8a47108c49b99f4d1394"><code>5f117b2</code></a> Increase test coverage of the <code>python_format</code> checker (<a href="https://redirect.github.com/python-babel/babel/issues/1176">#1176</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/363ad7531fb5dcdc3e9844573592b0b44afb914b"><code>363ad75</code></a> Fix dates formatting <code>Y</code>, <code>w</code> and <code>W</code> symbols for week-numbering (<a href="https://redirect.github.com/python-babel/babel/issues/1179">#1179</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/e9c3ef8d0de3080ca59f7f8dbabf9b52983adc7d"><code>e9c3ef8</code></a> Merge pull request <a href="https://redirect.github.com/python-babel/babel/issues/1173">#1173</a> from python-babel/lc-monetary-2</li> <li><a href="https://github.com/python-babel/babel/commit/56ef7c7f578a904917464c187e399abb762bd5e3"><code>56ef7c7</code></a> Prefer LC_MONETARY when formatting currency</li> <li><a href="https://github.com/python-babel/babel/commit/aee6d698b541dc50439280d7e093092cc0d4b832"><code>aee6d69</code></a> <code>default_locale</code>: support multiple keys</li> <li><a href="https://github.com/python-babel/babel/commit/2d8a808864d1aae5d3d02d4f95917c79740c5d35"><code>2d8a808</code></a> Import <code>Literal</code> &amp; <code>TypedDict</code> from the typing module (<a href="https://redirect.github.com/python-babel/babel/issues/1175">#1175</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/98b9562c05e5276038c27ec12c12f3e92dc027b6"><code>98b9562</code></a> Add basic support for <code>Message.python_brace_format</code> (<a href="https://redirect.github.com/python-babel/babel/issues/1169">#1169</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/0c1091c9de9543e30bc4b845eb10b5bf84516d7b"><code>0c1091c</code></a> Small test cleanup (<a href="https://redirect.github.com/python-babel/babel/issues/1172">#1172</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/db4879136a7fbcef475f26b75dbdd65d0ce488f9"><code>db48791</code></a> Merge pull request <a href="https://redirect.github.com/python-babel/babel/issues/1170">#1170</a> from python-babel/small-cleanup</li> <li>Additional commits viewable in <a href="https://github.com/python-babel/babel/compare/v2.16.0...v2.17.0">compare view</a></li> </ul> </details> <br /> </code></pre> Updates `beautifulsoup4` from 4.12.3 to 4.13.3 Updates `certifi` from 2024.8.30 to 2025.1.31 <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/certifi/python-certifi/commit/088f93122ea7c91cfdaeea7fa76ab2f850b8064d"><code>088f931</code></a> 2025.01.31 (<a href="https://redirect.github.com/certifi/python-certifi/issues/336">#336</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/1c177954a1d9f46efdff5956fe16de88bdcefc34"><code>1c17795</code></a> Bump pypa/gh-action-pypi-publish from 1.12.3 to 1.12.4 (<a href="https://redirect.github.com/certifi/python-certifi/issues/335">#335</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/a2e88f0eb5bab543e97f43dac5d38739bd193bd0"><code>a2e88f0</code></a> Bump actions/upload-artifact from 4.5.0 to 4.6.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/334">#334</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/82284ed1f981c6a3ba4ef9de739cd32918e70a26"><code>82284ed</code></a> Bump peter-evans/create-pull-request from 7.0.5 to 7.0.6 (<a href="https://redirect.github.com/certifi/python-certifi/issues/333">#333</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/10d3d1d86c89e4054ce2c021cf2309af8c26aa57"><code>10d3d1d</code></a> Bump actions/upload-artifact from 4.4.3 to 4.5.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/332">#332</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/4ba39005afa1958ee24af51a11b64299fba61025"><code>4ba3900</code></a> 2024.12.14 (<a href="https://redirect.github.com/certifi/python-certifi/issues/329">#329</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/9164660735d61e7eee69e7ff28dec5200eddf20f"><code>9164660</code></a> Bump pypa/gh-action-pypi-publish from 1.12.2 to 1.12.3 (<a href="https://redirect.github.com/certifi/python-certifi/issues/331">#331</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/3dc36518666bb84a2feeaa45d60a231af494c35b"><code>3dc3651</code></a> Bump pypa/gh-action-pypi-publish from 1.11.0 to 1.12.2 (<a href="https://redirect.github.com/certifi/python-certifi/issues/328">#328</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/c5bf18dcd30be7e743268c2d0ce484e539b589c0"><code>c5bf18d</code></a> Bump pypa/gh-action-pypi-publish from 1.10.3 to 1.11.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/327">#327</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/b9083917686e810b56e305cb45364af482b63099"><code>b908391</code></a> Bump actions/setup-python from 5.2.0 to 5.3.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/326">#326</a>)</li> <li>Additional commits viewable in <a href="https://github.com/certifi/python-certifi/compare/2024.08.30...2025.01.31">compare view</a></li> </ul> </details> <br /> Updates `charset-normalizer` from 3.4.0 to 3.4.1 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/jawah/charset_normalizer/releases">charset-normalizer's releases</a>.</em></p> <blockquote> <h2>Version 3.4.1</h2> <h2>🚀 We're still raising awareness around HTTP/2, and HTTP/3!</h2> <p>Did you know that Internet Explorer 11 shipped with an optional HTTP/2 support back in 2013? also libcurl did ship it in 2014[...] Using Requests today is the rough equivalent of using EOL Windows 8! We promptly invite Python developers to look at the first drop-in replacement for Requests, <a href="https://github.com/jawah/niquests">namely Niquests</a>. Ship with native WebSocket, SSE, Happy Eyeballs, DNS over HTTPS, and so on[...] All of this while remaining compatible with all Requests prior plug-ins / add-ons.</p> <p>It leverages charset-normalizer in a better way! Check it out, you will gain up to being 3X faster and get a real/respectable support with it.</p> <h2><a href="https://github.com/Ousret/charset_normalizer/compare/3.4.0...3.4.1">3.4.1</a> (2024-12-24)</h2> <h3>Changed</h3> <ul> <li>Project metadata are now stored using <code>pyproject.toml</code> instead of <code>setup.cfg</code> using setuptools as the build backend.</li> <li>Enforce annotation delayed loading for a simpler and consistent types in the project.</li> <li>Optional mypyc compilation upgraded to version 1.14 for Python >= 3.8</li> </ul> <h3>Added</h3> <ul> <li>pre-commit configuration.</li> <li>noxfile.</li> </ul> <h3>Removed</h3> <ul> <li><code>build-requirements.txt</code> as per using <code>pyproject.toml</code> native build configuration.</li> <li><code>bin/integration.py</code> and <code>bin/serve.py</code> in favor of downstream integration test (see noxfile).</li> <li><code>setup.cfg</code> in favor of <code>pyproject.toml</code> metadata configuration.</li> <li>Unused <code>utils.range_scan</code> function.</li> </ul> <h3>Fixed</h3> <ul> <li>Converting content to Unicode bytes may insert <code>utf_8</code> instead of preferred <code>utf-8</code>. (<a href="https://redirect.github.com/jawah/charset_normalizer/issues/572">#572</a>)</li> <li>Deprecation warning "'count' is passed as positional argument" when converting to Unicode bytes on Python 3.13+</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/jawah/charset_normalizer/blob/master/CHANGELOG.md">charset-normalizer's changelog</a>.</em></p> <blockquote> <h2><a href="https://github.com/Ousret/charset_normalizer/compare/3.4.0...3.4.1">3.4.1</a> (2024-12-24)</h2> <h3>Changed</h3> <ul> <li>Project metadata are now stored using <code>pyproject.toml</code> instead of <code>setup.cfg</code> using setuptools as the build backend.</li> <li>Enforce annotation delayed loading for a simpler and consistent types in the project.</li> <li>Optional mypyc compilation upgraded to version 1.14 for Python >= 3.8</li> </ul> <h3>Added</h3> <ul> <li>pre-commit configuration.</li> <li>noxfile.</li> </ul> <h3>Removed</h3> <ul> <li><code>build-requirements.txt</code> as per using <code>pyproject.toml</code> native build configuration.</li> <li><code>bin/integration.py</code> and <code>bin/serve.py</code> in favor of downstream integration test (see noxfile).</li> <li><code>setup.cfg</code> in favor of <code>pyproject.toml</code> metadata configuration.</li> <li>Unused <code>utils.range_scan</code> function.</li> </ul> <h3>Fixed</h3> <ul> <li>Converting content to Unicode bytes may insert <code>utf_8</code> instead of preferred <code>utf-8</code>. (<a href="https://redirect.github.com/jawah/charset_normalizer/issues/572">#572</a>)</li> <li>Deprecation warning "'count' is passed as positional argument" when converting to Unicode bytes on Python 3.13+</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/jawah/charset_normalizer/commit/ffdf7f5f08beb0ceb92dc0637e97382ba27cecfa"><code>ffdf7f5</code></a> :wrench: fix long description content-type inferred as rst instead of md</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/c7197b7b425835dd7abf028f45e6b533060886e3"><code>c7197b7</code></a> :pencil: fix changelog entries (<a href="https://redirect.github.com/jawah/charset_normalizer/issues/582">#582</a>)</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/c390e1f231473f2766dd860dc70a1ee1ae5609e6"><code>c390e1f</code></a> Merge pull request <a href="https://redirect.github.com/jawah/charset_normalizer/issues/581">#581</a> from jawah/refresh-part-2</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/f9d6b8cf32c36cbeefcd42f585bf57bfc39cee11"><code>f9d6b8c</code></a> :lock: add CODEOWNERS</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/7ce1ef1de3148d18eb6a01448c9a15bf5324a9cf"><code>7ce1ef1</code></a> :wrench: use ubuntu-22.04 for cibuildwheel in continuous deployment workflow</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/deed20577ba5358bb9624c17e6c8aa6ab26f6e08"><code>deed205</code></a> :wrench: update LICENSE copyright</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/f11f5710799db58947a6fb61c20dbb75e57e3b5d"><code>f11f571</code></a> :wrench: include noxfile in sdist</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/1ec7c0632f15324afd769208553bf603be5f917e"><code>1ec7c06</code></a> :wrench: update changelog</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/14b4649fa24ee0d58e351c106011fb1bace4a9bc"><code>14b4649</code></a> :bug: output(...) replace declarative mark using non iana compliant encoding ...</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/1b06bc0407dc0f47e9629cbc802977711d0ffc7b"><code>1b06bc0</code></a> Merge branch 'refresh-part-2' of github.com:jawah/charset_normalizer into ref...</li> <li>Additional commits viewable in <a href="https://github.com/jawah/charset_normalizer/compare/3.4.0...3.4.1">compare view</a></li> </ul> </details> <br /> Updates `pygments` from 2.18.0 to 2.19.1 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/pygments/pygments/releases">pygments's releases</a>.</em></p> <blockquote> <h2>2.19.1</h2> <ul> <li> <p>Updated lexers:</p> <ul> <li>Ini: Fix quoted string regression introduced in 2.19.0</li> <li>Lua: Fix a regression introduced in 2.19.0</li> </ul> </li> </ul> <h2>2.19.0</h2> <ul> <li> <p>New lexers:</p> <ul> <li>CodeQL (<a href="https://redirect.github.com/pygments/pygments/issues/2819">#2819</a>)</li> <li>Debian Sources (<a href="https://redirect.github.com/pygments/pygments/issues/2788">#2788</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2747">#2747</a>)</li> <li>Gleam (<a href="https://redirect.github.com/pygments/pygments/issues/2662">#2662</a>)</li> <li>GoogleSQL (<a href="https://redirect.github.com/pygments/pygments/issues/2820">#2820</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2814">#2814</a>)</li> <li>JSON5 (<a href="https://redirect.github.com/pygments/pygments/issues/2734">#2734</a>, <a href="https://redirect.github.com/pygments/pygments/issues/1880">#1880</a>)</li> <li>Maple (<a href="https://redirect.github.com/pygments/pygments/issues/2763">#2763</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2548">#2548</a>)</li> <li>NumbaIR (<a href="https://redirect.github.com/pygments/pygments/issues/2433">#2433</a>)</li> <li>PDDL (<a href="https://redirect.github.com/pygments/pygments/issues/2799">#2799</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2616">#2616</a>)</li> <li>Rego (<a href="https://redirect.github.com/pygments/pygments/issues/2794">#2794</a>)</li> <li>TableGen (<a href="https://redirect.github.com/pygments/pygments/issues/2751">#2751</a>)</li> <li>Vue.js (<a href="https://redirect.github.com/pygments/pygments/issues/2832">#2832</a>)</li> </ul> </li> <li> <p>Updated lexers:</p> <ul> <li>BQN: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2789">#2789</a>)</li> <li>C#: Fix number highlighting (<a href="https://redirect.github.com/pygments/pygments/issues/986">#986</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2727">#2727</a>), add <code>file</code> keyword (<a href="https://redirect.github.com/pygments/pygments/issues/2726">#2726</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2805">#2805</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2806">#2806</a>), add various other keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2745">#2745</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2770">#2770</a>)</li> <li>CSS: Add <code>revert</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2766">#2766</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2775">#2775</a>)</li> <li>Debian control: Add <code>Change-By</code> field (<a href="https://redirect.github.com/pygments/pygments/issues/2757">#2757</a>)</li> <li>Elip: Improve punctuation handling (<a href="https://redirect.github.com/pygments/pygments/issues/2651">#2651</a>)</li> <li>Igor: Add <code>int</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2801">#2801</a>)</li> <li>Ini: Fix quoted strings with embedded comment characters (<a href="https://redirect.github.com/pygments/pygments/issues/2767">#2767</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2720">#2720</a>)</li> <li>Java: Support functions returning types containing a question mark (<a href="https://redirect.github.com/pygments/pygments/issues/2737">#2737</a>)</li> <li>JavaScript: Support private identiiers (<a href="https://redirect.github.com/pygments/pygments/issues/2729">#2729</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2671">#2671</a>)</li> <li>LLVM: Add <code>splat</code>, improve floating-point number parsing (<a href="https://redirect.github.com/pygments/pygments/issues/2755">#2755</a>)</li> <li>Lua: Improve variable detection, add built-in functions (<a href="https://redirect.github.com/pygments/pygments/issues/2829">#2829</a>)</li> <li>Macaulay2: Update to 1.24.11 (<a href="https://redirect.github.com/pygments/pygments/issues/2800">#2800</a>)</li> <li>PostgreSQL: Add more <code>EXPLAIN</code> keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2785">#2785</a>), handle <code>/</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2774">#2774</a>)</li> <li>S-Lexer: Fix keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2082">#2082</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2750">#2750</a>)</li> <li>TransactSQL: Fix single-line comments (<a href="https://redirect.github.com/pygments/pygments/issues/2717">#2717</a>)</li> <li>Turtle: Fix triple quoted strings (<a href="https://redirect.github.com/pygments/pygments/issues/2744">#2744</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2758">#2758</a>)</li> <li>Typst: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2724">#2724</a>)</li> <li>Various: Add <code>^</code> as an operator to Matlab, Octave and Scilab (<a href="https://redirect.github.com/pygments/pygments/issues/2798">#2798</a>)</li> <li>Vyper: Add <code>staticcall</code> and <code>extcall</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2719">#2719</a>)</li> </ul> </li> </ul> <ul> <li>Mark file extensions for <code>HTML/XML+Evoque</code> as aliases (<a href="https://redirect.github.com/pygments/pygments/issues/2743">#2743</a>)</li> <li>Add a color for <code>Operator.Word</code> to the <code>rrt</code> style (<a href="https://redirect.github.com/pygments/pygments/issues/2709">#2709</a>)</li> <li>Fix broken link in the documentation (<a href="https://redirect.github.com/pygments/pygments/issues/2803">#2803</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2804">#2804</a>)</li> <li>Drop executable bit where not needed (<a href="https://redirect.github.com/pygments/pygments/issues/2781">#2781</a>)</li> <li>Reduce Mojo priority relative to Python in ``analyze_text´` (<a href="https://redirect.github.com/pygments/pygments/issues/2771">#2771</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2772">#2772</a>)</li> <li>Fix documentation builds (<a href="https://redirect.github.com/pygments/pygments/issues/2712">#2712</a>)</li> <li>Match example file names to the lexer's name (<a href="https://redirect.github.com/pygments/pygments/issues/2713">#2713</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2715">#2715</a>)</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pygments/pygments/blob/master/CHANGES">pygments's changelog</a>.</em></p> <blockquote> <h2>Version 2.19.1</h2> <p>(released January 6th, 2025)</p> <ul> <li> <p>Updated lexers:</p> <ul> <li>Ini: Fix quoted string regression introduced in 2.19.0</li> <li>Lua: Fix a regression introduced in 2.19.0</li> </ul> </li> </ul> <h2>Version 2.19.0</h2> <p>(released January 5th, 2025)</p> <ul> <li> <p>New lexers:</p> <ul> <li>CodeQL (<a href="https://redirect.github.com/pygments/pygments/issues/2819">#2819</a>)</li> <li>Debian Sources (<a href="https://redirect.github.com/pygments/pygments/issues/2788">#2788</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2747">#2747</a>)</li> <li>Gleam (<a href="https://redirect.github.com/pygments/pygments/issues/2662">#2662</a>)</li> <li>GoogleSQL (<a href="https://redirect.github.com/pygments/pygments/issues/2820">#2820</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2814">#2814</a>)</li> <li>JSON5 (<a href="https://redirect.github.com/pygments/pygments/issues/2734">#2734</a>, <a href="https://redirect.github.com/pygments/pygments/issues/1880">#1880</a>)</li> <li>Maple (<a href="https://redirect.github.com/pygments/pygments/issues/2763">#2763</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2548">#2548</a>)</li> <li>NumbaIR (<a href="https://redirect.github.com/pygments/pygments/issues/2433">#2433</a>)</li> <li>PDDL (<a href="https://redirect.github.com/pygments/pygments/issues/2799">#2799</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2616">#2616</a>)</li> <li>Rego (<a href="https://redirect.github.com/pygments/pygments/issues/2794">#2794</a>)</li> <li>TableGen (<a href="https://redirect.github.com/pygments/pygments/issues/2751">#2751</a>)</li> <li>Vue.js (<a href="https://redirect.github.com/pygments/pygments/issues/2832">#2832</a>)</li> </ul> </li> <li> <p>Updated lexers:</p> <ul> <li>BQN: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2789">#2789</a>)</li> <li>C#: Fix number highlighting (<a href="https://redirect.github.com/pygments/pygments/issues/986">#986</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2727">#2727</a>), add <code>file</code> keyword (<a href="https://redirect.github.com/pygments/pygments/issues/2726">#2726</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2805">#2805</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2806">#2806</a>), add various other keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2745">#2745</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2770">#2770</a>)</li> <li>CSS: Add <code>revert</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2766">#2766</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2775">#2775</a>)</li> <li>Debian control: Add <code>Change-By</code> field (<a href="https://redirect.github.com/pygments/pygments/issues/2757">#2757</a>)</li> <li>Elip: Improve punctuation handling (<a href="https://redirect.github.com/pygments/pygments/issues/2651">#2651</a>)</li> <li>Igor: Add <code>int</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2801">#2801</a>)</li> <li>Ini: Fix quoted strings with embedded comment characters (<a href="https://redirect.github.com/pygments/pygments/issues/2767">#2767</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2720">#2720</a>)</li> <li>Java: Support functions returning types containing a question mark (<a href="https://redirect.github.com/pygments/pygments/issues/2737">#2737</a>)</li> <li>JavaScript: Support private identiiers (<a href="https://redirect.github.com/pygments/pygments/issues/2729">#2729</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2671">#2671</a>)</li> <li>LLVM: Add <code>splat</code>, improve floating-point number parsing (<a href="https://redirect.github.com/pygments/pygments/issues/2755">#2755</a>)</li> <li>Lua: Improve variable detection, add built-in functions (<a href="https://redirect.github.com/pygments/pygments/issues/2829">#2829</a>)</li> <li>Macaulay2: Update to 1.24.11 (<a href="https://redirect.github.com/pygments/pygments/issues/2800">#2800</a>)</li> <li>PostgreSQL: Add more <code>EXPLAIN</code> keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2785">#2785</a>), handle <code>/</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2774">#2774</a>)</li> <li>S-Lexer: Fix keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2082">#2082</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2750">#2750</a>)</li> <li>TransactSQL: Fix single-line comments (<a href="https://redirect.github.com/pygments/pygments/issues/2717">#2717</a>)</li> <li>Turtle: Fix triple quoted strings (<a href="https://redirect.github.com/pygments/pygments/issues/2744">#2744</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2758">#2758</a>)</li> <li>Typst: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2724">#2724</a>)</li> <li>Various: Add <code>^</code> as an operator to Matlab, Octave and Scilab (<a href="https://redirect.github.com/pygments/pygments/issues/2798">#2798</a>)</li> <li>Vyper: Add <code>staticcall</code> and <code>extcall</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2719">#2719</a>)</li> </ul> </li> </ul> <ul> <li>Mark file extensions for <code>HTML/XML+Evoque</code> as aliases (<a href="https://redirect.github.com/pygments/pygments/issues/2743">#2743</a>)</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pygments/pygments/commit/b583de4794e94b4dc4c2da03a7c29f462482293e"><code>b583de4</code></a> Prepare 2.19.1 release.</li> <li><a href="https://github.com/pygments/pygments/commit/c13f3f11b8594decd01a8867e17a1a078ba2defd"><code>c13f3f1</code></a> Prepare 2.19.1 release.</li> <li><a href="https://github.com/pygments/pygments/commit/cdbcd43227ea838909abada93533013a99b564c7"><code>cdbcd43</code></a> Add regression test for .ini issue, update CHANGES.</li> <li><a href="https://github.com/pygments/pygments/commit/5792a21f452cd85c40c5a45bd6d69abb4d3a6d3e"><code>5792a21</code></a> Update CHANGES.</li> <li><a href="https://github.com/pygments/pygments/commit/a9858663ed85219ed7475f5877b22b9cb49f660f"><code>a985866</code></a> Merge pull request <a href="https://redirect.github.com/pygments/pygments/issues/2835">#2835</a> from kartben/fix_ini_double_quotes</li> <li><a href="https://github.com/pygments/pygments/commit/5822fd1fda4ded57651b6e95664da2c37bd0ed58"><code>5822fd1</code></a> Fix Lua regressions.</li> <li><a href="https://github.com/pygments/pygments/commit/673d8243c1c66363c83ae5467b4cecf13b506f3c"><code>673d824</code></a> Fix quoted string handling</li> <li><a href="https://github.com/pygments/pygments/commit/43bf86fb86f0a3a4bacedc65eace650947ecee51"><code>43bf86f</code></a> Improve example regex in the docs.</li> <li><a href="https://github.com/pygments/pygments/commit/452ac621811e946c8276c298dc318343d63371e4"><code>452ac62</code></a> Move on past 2.19.0.</li> <li><a href="https://github.com/pygments/pygments/commit/62dff316900a548aabf741d662b79edc39ed78b5"><code>62dff31</code></a> Prepare 2.19 release.</li> <li>Additional commits viewable in <a href="https://github.com/pygments/pygments/compare/2.18.0...2.19.1">compare view</a></li> </ul> </details> <br /> Updates `sphinx-reredirects` from 0.1.2 to 0.1.6 <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/9c21d3b53855a7783c00becbbdc60ed509ba84bb"><code>9c21d3b</code></a> chore: release 0.1.6</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/638f011c6406ab92b7ca96d14cfd1da4bf108ff4"><code>638f011</code></a> Merge branch 'davidekete-preserve-url-fragments'</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/e50560fcc30a187d50412d47a7e74c286a7eff63"><code>e50560f</code></a> Merge branch 'main' into preserve-url-fragments</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/a0822b53aa33c624a086160ee6f17efaf27b3c6a"><code>a0822b5</code></a> feat: update default HTML template to preserve url fragments</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/29503e30720d151109e4cf38708d44bdde388982"><code>29503e3</code></a> style: reformatted with prettier</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/19207de769213abd98214db4741428ace73e043e"><code>19207de</code></a> chore: setup maintenance tools</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/4671309394be569e15cf004598242588bdbd9ce7"><code>4671309</code></a> feat: update FAQ to match new default template</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/36c6a8bb7126d5e3d28c69525bb4747da744e30b"><code>36c6a8b</code></a> feat: update default HTML template to preserve url fragments</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/7b3cf64a77893e69cdccffb228dd5df8b5b1bff9"><code>7b3cf64</code></a> docs: Update LICENSE to MIT</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/1fb15c82b8951a5701301f774497627a77cb2900"><code>1fb15c8</code></a> docs: create README.md</li> <li>Additional commits viewable in <a href="https://github.com/documatt/sphinx-reredirects/compare/v0.1.2...v0.1.6">compare view</a></li> </ul> </details> <br /> Updates `urllib3` from 2.2.3 to 2.3.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>2.3.0</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Features</h2> <ul> <li>Added <code>HTTPResponse.shutdown()</code> to stop any ongoing or future reads for a specific response. It calls <code>shutdown(SHUT_RD)</code> on the underlying socket. This feature was <a href="https://opencollective.com/urllib3/contributions/815307">sponsored by LaunchDarkly</a>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2868">urllib3/urllib3#2868</a>)</li> <li>Added support for JavaScript Promise Integration on Emscripten. This enables more efficient WebAssembly requests and streaming, and makes it possible to use in Node.js if you launch it as node <code>--experimental-wasm-stack-switching</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3400">urllib3/urllib3#3400</a>)</li> <li>Added the <code>proxy_is_tunneling</code> property to <code>HTTPConnection</code> and <code>HTTPSConnection</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3285">urllib3/urllib3#3285</a>)</li> <li>Added pickling support to <code>NewConnectionError</code> and <code>NameResolutionError</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3480">urllib3/urllib3#3480</a>)</li> </ul> <h2>Bugfixes</h2> <ul> <li>Fixed an issue in debug logs where the HTTP version was rendering as "HTTP/11" instead of "HTTP/1.1". (<a href="https://redirect.github.com/urllib3/urllib3/issues/3489">urllib3/urllib3#3489</a>)</li> </ul> <h2>Deprecations and Removals</h2> <ul> <li>Removed support for Python 3.8. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3492">urllib3/urllib3#3492</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/urllib3/urllib3/compare/2.2.3...2.3.0">https://github.com/urllib3/urllib3/compare/2.2.3...2.3.0</a></p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>2.3.0 (2024-12-22)</h1> <h2>Features</h2> <ul> <li>Added <code>HTTPResponse.shutdown()</code> to stop any ongoing or future reads for a specific response. It calls <code>shutdown(SHUT_RD)</code> on the underlying socket. This feature was <code>sponsored by LaunchDarkly <https://opencollective.com/urllib3/contributions/815307></code><strong>. (<code>[#2868](https://github.com/urllib3/urllib3/issues/2868) <https://github.com/urllib3/urllib3/issues/2868></code></strong>)</li> <li>Added support for JavaScript Promise Integration on Emscripten. This enables more efficient WebAssembly requests and streaming, and makes it possible to use in Node.js if you launch it as <code>node --experimental-wasm-stack-switching</code>. (<code>[#3400](https://github.com/urllib3/urllib3/issues/3400) <https://github.com/urllib3/urllib3/issues/3400></code>__)</li> <li>Added the <code>proxy_is_tunneling</code> property to <code>HTTPConnection</code> and <code>HTTPSConnection</code>. (<code>[#3285](https://github.com/urllib3/urllib3/issues/3285) <https://github.com/urllib3/urllib3/issues/3285></code>__)</li> <li>Added pickling support to <code>NewConnectionError</code> and <code>NameResolutionError</code>. (<code>[#3480](https://github.com/urllib3/urllib3/issues/3480) <https://github.com/urllib3/urllib3/issues/3480></code>__)</li> </ul> <h2>Bugfixes</h2> <ul> <li>Fixed an issue in debug logs where the HTTP version was rendering as "HTTP/11" instead of "HTTP/1.1". (<code>[#3489](https://github.com/urllib3/urllib3/issues/3489) <https://github.com/urllib3/urllib3/issues/3489></code>__)</li> </ul> <h2>Deprecations and Removals</h2> <ul> <li>Removed support for Python 3.8. (<code>[#3492](https://github.com/urllib3/urllib3/issues/3492) <https://github.com/urllib3/urllib3/issues/3492></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/2f68c5363ef632d73dd4d9300289d7ce5ff275b4"><code>2f68c53</code></a> Release 2.3.0</li> <li><a href="https://github.com/urllib3/urllib3/commit/f7bcf6986fa9c43fc7884b648f66688db593b491"><code>f7bcf69</code></a> Add HTTPResponse.shutdown() to stop blocking reads (<a href="https://redirect.github.com/urllib3/urllib3/issues/3527">#3527</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/e94224931feddf9e12bb25452bf0d0c21da8a7e0"><code>e942249</code></a> Update .readthedocs.yml addressing a deprecation (<a href="https://redirect.github.com/urllib3/urllib3/issues/3534">#3534</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/905549d64a948abd4b6962edecb8dd5569166275"><code>905549d</code></a> Upgrade Python pre-commit tools (<a href="https://redirect.github.com/urllib3/urllib3/issues/3529">#3529</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/716d8340b89f7d8ec549579d14e3c0a7e5f859a5"><code>716d834</code></a> Fix PyPI publish with Core metadata 2.4 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3531">#3531</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/7ab935c6ddd546c7d57b03c0269685c61c8e60c6"><code>7ab935c</code></a> Address zizmor issues</li> <li><a href="https://github.com/urllib3/urllib3/commit/181357ed2aecf9c523f2664c05f176cde9692994"><code>181357e</code></a> Bump Quart to fix CI (<a href="https://redirect.github.com/urllib3/urllib3/issues/3524">#3524</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/0e7e0df0586573d51c78076d4871050783bec7c8"><code>0e7e0df</code></a> Start testing with Python 3.14</li> <li><a href="https://github.com/urllib3/urllib3/commit/d67d09bfd04ecdae1280a563d06b32949befaf71"><code>d67d09b</code></a> Bump mypy version</li> <li><a href="https://github.com/urllib3/urllib3/commit/20032ec38a09680bcfb6d97b4c43b276af43cc64"><code>20032ec</code></a> Drop unneeded dependency pins and a warning filter</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/2.2.3...2.3.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
ggojska
pushed a commit
to ggojska/llvm
that referenced
this pull request
Apr 7, 2025
…ntel#17770) Bumps the llvm-docs-requirements group in /llvm/docs with 7 updates: | Package | From | To | | --- | --- | --- | | [babel](https://github.com/python-babel/babel) | `2.16.0` | `2.17.0` | | [beautifulsoup4](https://www.crummy.com/software/BeautifulSoup/bs4/) | `4.12.3` | `4.13.3` | | [certifi](https://github.com/certifi/python-certifi) | `2024.8.30` | `2025.1.31` | | [charset-normalizer](https://github.com/jawah/charset_normalizer) | `3.4.0` | `3.4.1` | | [pygments](https://github.com/pygments/pygments) | `2.18.0` | `2.19.1` | | [sphinx-reredirects](https://github.com/documatt/sphinx-reredirects) | `0.1.2` | `0.1.6` | | [urllib3](https://github.com/urllib3/urllib3) | `2.2.3` | `2.3.0` | Updates `babel` from 2.16.0 to 2.17.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/python-babel/babel/releases">babel's releases</a>.</em></p> <blockquote> <h2>v2.17.0</h2> <p>Happy 2025! This release is being made from FOSDEM 2025, in Brussels, Belgium. 🇧🇪</p> <p>Thank you to all contributors, new and old, and here's to another great year of internationalization and localization!</p> <hr /> <p>The changelog below is auto-generated by GitHub.</p> <p>Please see <a href="https://github.com/python-babel/babel/blob/b50a1d2186c20f3359f7e10853d2b2225a46ed40/CHANGES.rst">CHANGELOG.rst</a> for additional details.</p> <hr /> <h2>What's Changed</h2> <ul> <li>Fix deprecation warnings for <code>datetime.utcnow()</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1119">python-babel/babel#1119</a></li> <li>Enclose white spaces in references by <a href="https://github.com/Dunedan"><code>@Dunedan</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1105">python-babel/babel#1105</a></li> <li>Replace <code>str.index</code> with <code>str.find</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1130">python-babel/babel#1130</a></li> <li>Replace more alternate characters in <code>format_skeleton</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1122">python-babel/babel#1122</a></li> <li>Fix extracted lineno with nested calls by <a href="https://github.com/dylankiss"><code>@dylankiss</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1126">python-babel/babel#1126</a></li> <li>"Deleted duplicate code in test" by <a href="https://github.com/mattdiaz007"><code>@mattdiaz007</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1138">python-babel/babel#1138</a></li> <li>Fix of list index out of range error in PoFileParser.add_message when translations is empty by <a href="https://github.com/gabe-sherman"><code>@gabe-sherman</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1135">python-babel/babel#1135</a></li> <li>Make seconds optional in <code>parse_time</code> time formats by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1141">python-babel/babel#1141</a></li> <li>Mark <code>wraptext</code> deprecated; use <code>TextWrapper</code> directly in <code>write_po</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1140">python-babel/babel#1140</a></li> <li>Fix the way obsolete messages are stored by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1132">python-babel/babel#1132</a></li> <li>Replace <code>OrderedDict</code> with just <code>dict</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1149">python-babel/babel#1149</a></li> <li>Use CLDR 46 by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1145">python-babel/babel#1145</a></li> <li>Update CI to use python 3.13 and Ubuntu 24.04 by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1153">python-babel/babel#1153</a></li> <li>Adjust docs/conf.py to add compatibility with sphinx 8 by <a href="https://github.com/hrnciar"><code>@hrnciar</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1155">python-babel/babel#1155</a></li> <li>Allow specifying an explicit format in parse_date/parse_time by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1131">python-babel/babel#1131</a></li> <li>Simplify <code>read_mo</code> logic regarding <code>catalog.charset</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1148">python-babel/babel#1148</a></li> <li>Bump CI/tool versions by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1160">python-babel/babel#1160</a></li> <li>fix: check_and_call_extract_file uses the first matching method and options, instead of the first matching method and last matching options by <a href="https://github.com/jpmckinney"><code>@jpmckinney</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1121">python-babel/babel#1121</a></li> <li>Prevent wrapping file locations containing white space by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1120">python-babel/babel#1120</a></li> <li>Add tzdata as dev dependency and sync with tox.ini by <a href="https://github.com/wandrew004"><code>@wandrew004</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1159">python-babel/babel#1159</a></li> <li>Support short and narrow formats for format_timedelta when using <code>add_direction</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1163">python-babel/babel#1163</a></li> <li>Improve handling for <code>locale=None</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1164">python-babel/babel#1164</a></li> <li>Use <code>pytest.raises(match=...)</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1166">python-babel/babel#1166</a></li> <li>Strip extra leading slashes in <code>/etc/localtime</code> by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1165">python-babel/babel#1165</a></li> <li>Remove redundant assignment in <code>Catalog.__setitem__</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1167">python-babel/babel#1167</a></li> <li>Small cleanups by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1170">python-babel/babel#1170</a></li> <li>Small test cleanup by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1172">python-babel/babel#1172</a></li> <li>Add <code>Message.python_brace_format</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1169">python-babel/babel#1169</a></li> <li>Import <code>Literal</code> from the typing module by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1175">python-babel/babel#1175</a></li> <li>Prefer LC_MONETARY when formatting currencies by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1173">python-babel/babel#1173</a></li> <li>Fix dates formatting <code>Y</code>, <code>w</code> and <code>W</code> symbols for week-numbering by <a href="https://github.com/jun66j5"><code>@jun66j5</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1179">python-babel/babel#1179</a></li> <li>Increase test coverage of the <code>python_format</code> checker by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1176">python-babel/babel#1176</a></li> <li>Prepare for 2.17.0 by <a href="https://github.com/akx"><code>@akx</code></a> in <a href="https://redirect.github.com/python-babel/babel/pull/1182">python-babel/babel#1182</a></li> </ul> <h2>New Contributors</h2> <ul> <li><a href="https://github.com/Dunedan"><code>@Dunedan</code></a> made their first contribution in <a href="https://redirect.github.com/python-babel/babel/pull/1105">python-babel/babel#1105</a></li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/python-babel/babel/blob/master/CHANGES.rst">babel's changelog</a>.</em></p> <blockquote> <h2>Version 2.17.0</h2> <p>Happy 2025! This release is being made from FOSDEM 2025, in Brussels, Belgium.</p> <p>Thank you to all contributors, new and old, and here's to another great year of internationalization and localization!</p> <p>Features</p> <pre><code> * CLDR: Babel now uses CLDR 46, by @tomasr8 in :gh:`1145` * Dates: Allow specifying an explicit format in parse_date/parse_time by @tomasr8 in :gh:`1131` * Dates: More alternate characters are now supported by `format_skeleton`. By @tomasr8 in :gh:`1122` * Dates: Support short and narrow formats for format_timedelta when using `add_direction`, by @akx in :gh:`1163` * Messages: .po files now enclose white spaces in filenames like GNU gettext does. By @Dunedan in :gh:`1105`, and @tomasr8 in :gh:`1120` * Messages: Initial support for `Message.python_brace_format`, by @tomasr8 in :gh:`1169` * Numbers: LC_MONETARY is now preferred when formatting currencies, by @akx in :gh:`1173` <p>Bugfixes<br /> </code></pre></p> <ul> <li>Dates: Make seconds optional in <code>parse_time</code> time formats by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1141</code></li> <li>Dates: Replace <code>str.index</code> with <code>str.find</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1130</code></li> <li>Dates: Strip extra leading slashes in <code>/etc/localtime</code> by <a href="https://github.com/akx"><code>@akx</code></a> in :gh:<code>1165</code></li> <li>Dates: Week numbering and formatting of dates with week numbers was repaired by <a href="https://github.com/jun66j5"><code>@jun66j5</code></a> in :gh:<code>1179</code></li> <li>General: Improve handling for <code>locale=None</code> by <a href="https://github.com/akx"><code>@akx</code></a> in :gh:<code>1164</code></li> <li>General: Remove redundant assignment in <code>Catalog.__setitem__</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1167</code></li> <li>Messages: Fix extracted lineno with nested calls, by <a href="https://github.com/dylankiss"><code>@dylankiss</code></a> in :gh:<code>1126</code></li> <li>Messages: Fix of list index out of range when translations is empty, by <a href="https://github.com/gabe-sherman"><code>@gabe-sherman</code></a> in :gh:<code>1135</code></li> <li>Messages: Fix the way obsolete messages are stored by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1132</code></li> <li>Messages: Simplify <code>read_mo</code> logic regarding <code>catalog.charset</code> by <a href="https://github.com/tomasr8"><code>@tomasr8</code></a> in :gh:<code>1148</code></li> <li>Messages: Use the first matching method & options, rather than first matching method & last options, by <a href="https://github.com/jpmckinney"><code>@jpmckinney</code></a> in :gh:<code>1121</code></li> </ul> <p>Deprecation and compatibility</p> <pre><code> * Dates: Fix deprecation warnings for `datetime.utcnow()` by @tomasr8 in :gh:`1119` * Docs: Adjust docs/conf.py to add compatibility with sphinx 8 by @hrnciar in :gh:`1155` * General: Import `Literal` from the typing module by @tomasr8 in :gh:`1175` * General: Replace `OrderedDict` with just `dict` by @tomasr8 in :gh:`1149` * Messages: Mark `wraptext` deprecated; use `TextWrapper` directly in `write_po` by @akx in :gh:`1140` <p>Infrastructure</p> <pre><code> * Add tzdata as dev dependency and sync with tox.ini by @wandrew004 in :gh:`1159` * Duplicate test code was deleted by @mattdiaz007 in :gh:`1138` * Increase test coverage of the `python_format` checker by @tomasr8 in :gh:`1176` * Small cleanups by @akx in :gh:`1160`, :gh:`1166`, :gh:`1170` and :gh:`1172` &lt;/tr&gt;&lt;/table&gt; </code></pre> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/python-babel/babel/commit/b50a1d2186c20f3359f7e10853d2b2225a46ed40"><code>b50a1d2</code></a> Prepare for 2.17.0 (<a href="https://redirect.github.com/python-babel/babel/issues/1182">#1182</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/5f117b2689573aa98acc8a47108c49b99f4d1394"><code>5f117b2</code></a> Increase test coverage of the <code>python_format</code> checker (<a href="https://redirect.github.com/python-babel/babel/issues/1176">#1176</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/363ad7531fb5dcdc3e9844573592b0b44afb914b"><code>363ad75</code></a> Fix dates formatting <code>Y</code>, <code>w</code> and <code>W</code> symbols for week-numbering (<a href="https://redirect.github.com/python-babel/babel/issues/1179">#1179</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/e9c3ef8d0de3080ca59f7f8dbabf9b52983adc7d"><code>e9c3ef8</code></a> Merge pull request <a href="https://redirect.github.com/python-babel/babel/issues/1173">#1173</a> from python-babel/lc-monetary-2</li> <li><a href="https://github.com/python-babel/babel/commit/56ef7c7f578a904917464c187e399abb762bd5e3"><code>56ef7c7</code></a> Prefer LC_MONETARY when formatting currency</li> <li><a href="https://github.com/python-babel/babel/commit/aee6d698b541dc50439280d7e093092cc0d4b832"><code>aee6d69</code></a> <code>default_locale</code>: support multiple keys</li> <li><a href="https://github.com/python-babel/babel/commit/2d8a808864d1aae5d3d02d4f95917c79740c5d35"><code>2d8a808</code></a> Import <code>Literal</code> &amp; <code>TypedDict</code> from the typing module (<a href="https://redirect.github.com/python-babel/babel/issues/1175">#1175</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/98b9562c05e5276038c27ec12c12f3e92dc027b6"><code>98b9562</code></a> Add basic support for <code>Message.python_brace_format</code> (<a href="https://redirect.github.com/python-babel/babel/issues/1169">#1169</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/0c1091c9de9543e30bc4b845eb10b5bf84516d7b"><code>0c1091c</code></a> Small test cleanup (<a href="https://redirect.github.com/python-babel/babel/issues/1172">#1172</a>)</li> <li><a href="https://github.com/python-babel/babel/commit/db4879136a7fbcef475f26b75dbdd65d0ce488f9"><code>db48791</code></a> Merge pull request <a href="https://redirect.github.com/python-babel/babel/issues/1170">#1170</a> from python-babel/small-cleanup</li> <li>Additional commits viewable in <a href="https://github.com/python-babel/babel/compare/v2.16.0...v2.17.0">compare view</a></li> </ul> </details> <br /> </code></pre> Updates `beautifulsoup4` from 4.12.3 to 4.13.3 Updates `certifi` from 2024.8.30 to 2025.1.31 <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/certifi/python-certifi/commit/088f93122ea7c91cfdaeea7fa76ab2f850b8064d"><code>088f931</code></a> 2025.01.31 (<a href="https://redirect.github.com/certifi/python-certifi/issues/336">#336</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/1c177954a1d9f46efdff5956fe16de88bdcefc34"><code>1c17795</code></a> Bump pypa/gh-action-pypi-publish from 1.12.3 to 1.12.4 (<a href="https://redirect.github.com/certifi/python-certifi/issues/335">#335</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/a2e88f0eb5bab543e97f43dac5d38739bd193bd0"><code>a2e88f0</code></a> Bump actions/upload-artifact from 4.5.0 to 4.6.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/334">#334</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/82284ed1f981c6a3ba4ef9de739cd32918e70a26"><code>82284ed</code></a> Bump peter-evans/create-pull-request from 7.0.5 to 7.0.6 (<a href="https://redirect.github.com/certifi/python-certifi/issues/333">#333</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/10d3d1d86c89e4054ce2c021cf2309af8c26aa57"><code>10d3d1d</code></a> Bump actions/upload-artifact from 4.4.3 to 4.5.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/332">#332</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/4ba39005afa1958ee24af51a11b64299fba61025"><code>4ba3900</code></a> 2024.12.14 (<a href="https://redirect.github.com/certifi/python-certifi/issues/329">#329</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/9164660735d61e7eee69e7ff28dec5200eddf20f"><code>9164660</code></a> Bump pypa/gh-action-pypi-publish from 1.12.2 to 1.12.3 (<a href="https://redirect.github.com/certifi/python-certifi/issues/331">#331</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/3dc36518666bb84a2feeaa45d60a231af494c35b"><code>3dc3651</code></a> Bump pypa/gh-action-pypi-publish from 1.11.0 to 1.12.2 (<a href="https://redirect.github.com/certifi/python-certifi/issues/328">#328</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/c5bf18dcd30be7e743268c2d0ce484e539b589c0"><code>c5bf18d</code></a> Bump pypa/gh-action-pypi-publish from 1.10.3 to 1.11.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/327">#327</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/b9083917686e810b56e305cb45364af482b63099"><code>b908391</code></a> Bump actions/setup-python from 5.2.0 to 5.3.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/326">#326</a>)</li> <li>Additional commits viewable in <a href="https://github.com/certifi/python-certifi/compare/2024.08.30...2025.01.31">compare view</a></li> </ul> </details> <br /> Updates `charset-normalizer` from 3.4.0 to 3.4.1 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/jawah/charset_normalizer/releases">charset-normalizer's releases</a>.</em></p> <blockquote> <h2>Version 3.4.1</h2> <h2>🚀 We're still raising awareness around HTTP/2, and HTTP/3!</h2> <p>Did you know that Internet Explorer 11 shipped with an optional HTTP/2 support back in 2013? also libcurl did ship it in 2014[...] Using Requests today is the rough equivalent of using EOL Windows 8! We promptly invite Python developers to look at the first drop-in replacement for Requests, <a href="https://github.com/jawah/niquests">namely Niquests</a>. Ship with native WebSocket, SSE, Happy Eyeballs, DNS over HTTPS, and so on[...] All of this while remaining compatible with all Requests prior plug-ins / add-ons.</p> <p>It leverages charset-normalizer in a better way! Check it out, you will gain up to being 3X faster and get a real/respectable support with it.</p> <h2><a href="https://github.com/Ousret/charset_normalizer/compare/3.4.0...3.4.1">3.4.1</a> (2024-12-24)</h2> <h3>Changed</h3> <ul> <li>Project metadata are now stored using <code>pyproject.toml</code> instead of <code>setup.cfg</code> using setuptools as the build backend.</li> <li>Enforce annotation delayed loading for a simpler and consistent types in the project.</li> <li>Optional mypyc compilation upgraded to version 1.14 for Python >= 3.8</li> </ul> <h3>Added</h3> <ul> <li>pre-commit configuration.</li> <li>noxfile.</li> </ul> <h3>Removed</h3> <ul> <li><code>build-requirements.txt</code> as per using <code>pyproject.toml</code> native build configuration.</li> <li><code>bin/integration.py</code> and <code>bin/serve.py</code> in favor of downstream integration test (see noxfile).</li> <li><code>setup.cfg</code> in favor of <code>pyproject.toml</code> metadata configuration.</li> <li>Unused <code>utils.range_scan</code> function.</li> </ul> <h3>Fixed</h3> <ul> <li>Converting content to Unicode bytes may insert <code>utf_8</code> instead of preferred <code>utf-8</code>. (<a href="https://redirect.github.com/jawah/charset_normalizer/issues/572">#572</a>)</li> <li>Deprecation warning "'count' is passed as positional argument" when converting to Unicode bytes on Python 3.13+</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/jawah/charset_normalizer/blob/master/CHANGELOG.md">charset-normalizer's changelog</a>.</em></p> <blockquote> <h2><a href="https://github.com/Ousret/charset_normalizer/compare/3.4.0...3.4.1">3.4.1</a> (2024-12-24)</h2> <h3>Changed</h3> <ul> <li>Project metadata are now stored using <code>pyproject.toml</code> instead of <code>setup.cfg</code> using setuptools as the build backend.</li> <li>Enforce annotation delayed loading for a simpler and consistent types in the project.</li> <li>Optional mypyc compilation upgraded to version 1.14 for Python >= 3.8</li> </ul> <h3>Added</h3> <ul> <li>pre-commit configuration.</li> <li>noxfile.</li> </ul> <h3>Removed</h3> <ul> <li><code>build-requirements.txt</code> as per using <code>pyproject.toml</code> native build configuration.</li> <li><code>bin/integration.py</code> and <code>bin/serve.py</code> in favor of downstream integration test (see noxfile).</li> <li><code>setup.cfg</code> in favor of <code>pyproject.toml</code> metadata configuration.</li> <li>Unused <code>utils.range_scan</code> function.</li> </ul> <h3>Fixed</h3> <ul> <li>Converting content to Unicode bytes may insert <code>utf_8</code> instead of preferred <code>utf-8</code>. (<a href="https://redirect.github.com/jawah/charset_normalizer/issues/572">#572</a>)</li> <li>Deprecation warning "'count' is passed as positional argument" when converting to Unicode bytes on Python 3.13+</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/jawah/charset_normalizer/commit/ffdf7f5f08beb0ceb92dc0637e97382ba27cecfa"><code>ffdf7f5</code></a> :wrench: fix long description content-type inferred as rst instead of md</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/c7197b7b425835dd7abf028f45e6b533060886e3"><code>c7197b7</code></a> :pencil: fix changelog entries (<a href="https://redirect.github.com/jawah/charset_normalizer/issues/582">#582</a>)</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/c390e1f231473f2766dd860dc70a1ee1ae5609e6"><code>c390e1f</code></a> Merge pull request <a href="https://redirect.github.com/jawah/charset_normalizer/issues/581">#581</a> from jawah/refresh-part-2</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/f9d6b8cf32c36cbeefcd42f585bf57bfc39cee11"><code>f9d6b8c</code></a> :lock: add CODEOWNERS</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/7ce1ef1de3148d18eb6a01448c9a15bf5324a9cf"><code>7ce1ef1</code></a> :wrench: use ubuntu-22.04 for cibuildwheel in continuous deployment workflow</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/deed20577ba5358bb9624c17e6c8aa6ab26f6e08"><code>deed205</code></a> :wrench: update LICENSE copyright</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/f11f5710799db58947a6fb61c20dbb75e57e3b5d"><code>f11f571</code></a> :wrench: include noxfile in sdist</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/1ec7c0632f15324afd769208553bf603be5f917e"><code>1ec7c06</code></a> :wrench: update changelog</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/14b4649fa24ee0d58e351c106011fb1bace4a9bc"><code>14b4649</code></a> :bug: output(...) replace declarative mark using non iana compliant encoding ...</li> <li><a href="https://github.com/jawah/charset_normalizer/commit/1b06bc0407dc0f47e9629cbc802977711d0ffc7b"><code>1b06bc0</code></a> Merge branch 'refresh-part-2' of github.com:jawah/charset_normalizer into ref...</li> <li>Additional commits viewable in <a href="https://github.com/jawah/charset_normalizer/compare/3.4.0...3.4.1">compare view</a></li> </ul> </details> <br /> Updates `pygments` from 2.18.0 to 2.19.1 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/pygments/pygments/releases">pygments's releases</a>.</em></p> <blockquote> <h2>2.19.1</h2> <ul> <li> <p>Updated lexers:</p> <ul> <li>Ini: Fix quoted string regression introduced in 2.19.0</li> <li>Lua: Fix a regression introduced in 2.19.0</li> </ul> </li> </ul> <h2>2.19.0</h2> <ul> <li> <p>New lexers:</p> <ul> <li>CodeQL (<a href="https://redirect.github.com/pygments/pygments/issues/2819">#2819</a>)</li> <li>Debian Sources (<a href="https://redirect.github.com/pygments/pygments/issues/2788">#2788</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2747">#2747</a>)</li> <li>Gleam (<a href="https://redirect.github.com/pygments/pygments/issues/2662">#2662</a>)</li> <li>GoogleSQL (<a href="https://redirect.github.com/pygments/pygments/issues/2820">#2820</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2814">#2814</a>)</li> <li>JSON5 (<a href="https://redirect.github.com/pygments/pygments/issues/2734">#2734</a>, <a href="https://redirect.github.com/pygments/pygments/issues/1880">#1880</a>)</li> <li>Maple (<a href="https://redirect.github.com/pygments/pygments/issues/2763">#2763</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2548">#2548</a>)</li> <li>NumbaIR (<a href="https://redirect.github.com/pygments/pygments/issues/2433">#2433</a>)</li> <li>PDDL (<a href="https://redirect.github.com/pygments/pygments/issues/2799">#2799</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2616">#2616</a>)</li> <li>Rego (<a href="https://redirect.github.com/pygments/pygments/issues/2794">#2794</a>)</li> <li>TableGen (<a href="https://redirect.github.com/pygments/pygments/issues/2751">#2751</a>)</li> <li>Vue.js (<a href="https://redirect.github.com/pygments/pygments/issues/2832">#2832</a>)</li> </ul> </li> <li> <p>Updated lexers:</p> <ul> <li>BQN: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2789">#2789</a>)</li> <li>C#: Fix number highlighting (<a href="https://redirect.github.com/pygments/pygments/issues/986">#986</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2727">#2727</a>), add <code>file</code> keyword (<a href="https://redirect.github.com/pygments/pygments/issues/2726">#2726</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2805">#2805</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2806">#2806</a>), add various other keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2745">#2745</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2770">#2770</a>)</li> <li>CSS: Add <code>revert</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2766">#2766</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2775">#2775</a>)</li> <li>Debian control: Add <code>Change-By</code> field (<a href="https://redirect.github.com/pygments/pygments/issues/2757">#2757</a>)</li> <li>Elip: Improve punctuation handling (<a href="https://redirect.github.com/pygments/pygments/issues/2651">#2651</a>)</li> <li>Igor: Add <code>int</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2801">#2801</a>)</li> <li>Ini: Fix quoted strings with embedded comment characters (<a href="https://redirect.github.com/pygments/pygments/issues/2767">#2767</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2720">#2720</a>)</li> <li>Java: Support functions returning types containing a question mark (<a href="https://redirect.github.com/pygments/pygments/issues/2737">#2737</a>)</li> <li>JavaScript: Support private identiiers (<a href="https://redirect.github.com/pygments/pygments/issues/2729">#2729</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2671">#2671</a>)</li> <li>LLVM: Add <code>splat</code>, improve floating-point number parsing (<a href="https://redirect.github.com/pygments/pygments/issues/2755">#2755</a>)</li> <li>Lua: Improve variable detection, add built-in functions (<a href="https://redirect.github.com/pygments/pygments/issues/2829">#2829</a>)</li> <li>Macaulay2: Update to 1.24.11 (<a href="https://redirect.github.com/pygments/pygments/issues/2800">#2800</a>)</li> <li>PostgreSQL: Add more <code>EXPLAIN</code> keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2785">#2785</a>), handle <code>/</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2774">#2774</a>)</li> <li>S-Lexer: Fix keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2082">#2082</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2750">#2750</a>)</li> <li>TransactSQL: Fix single-line comments (<a href="https://redirect.github.com/pygments/pygments/issues/2717">#2717</a>)</li> <li>Turtle: Fix triple quoted strings (<a href="https://redirect.github.com/pygments/pygments/issues/2744">#2744</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2758">#2758</a>)</li> <li>Typst: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2724">#2724</a>)</li> <li>Various: Add <code>^</code> as an operator to Matlab, Octave and Scilab (<a href="https://redirect.github.com/pygments/pygments/issues/2798">#2798</a>)</li> <li>Vyper: Add <code>staticcall</code> and <code>extcall</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2719">#2719</a>)</li> </ul> </li> </ul> <ul> <li>Mark file extensions for <code>HTML/XML+Evoque</code> as aliases (<a href="https://redirect.github.com/pygments/pygments/issues/2743">#2743</a>)</li> <li>Add a color for <code>Operator.Word</code> to the <code>rrt</code> style (<a href="https://redirect.github.com/pygments/pygments/issues/2709">#2709</a>)</li> <li>Fix broken link in the documentation (<a href="https://redirect.github.com/pygments/pygments/issues/2803">#2803</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2804">#2804</a>)</li> <li>Drop executable bit where not needed (<a href="https://redirect.github.com/pygments/pygments/issues/2781">#2781</a>)</li> <li>Reduce Mojo priority relative to Python in ``analyze_text´` (<a href="https://redirect.github.com/pygments/pygments/issues/2771">#2771</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2772">#2772</a>)</li> <li>Fix documentation builds (<a href="https://redirect.github.com/pygments/pygments/issues/2712">#2712</a>)</li> <li>Match example file names to the lexer's name (<a href="https://redirect.github.com/pygments/pygments/issues/2713">#2713</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2715">#2715</a>)</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/pygments/pygments/blob/master/CHANGES">pygments's changelog</a>.</em></p> <blockquote> <h2>Version 2.19.1</h2> <p>(released January 6th, 2025)</p> <ul> <li> <p>Updated lexers:</p> <ul> <li>Ini: Fix quoted string regression introduced in 2.19.0</li> <li>Lua: Fix a regression introduced in 2.19.0</li> </ul> </li> </ul> <h2>Version 2.19.0</h2> <p>(released January 5th, 2025)</p> <ul> <li> <p>New lexers:</p> <ul> <li>CodeQL (<a href="https://redirect.github.com/pygments/pygments/issues/2819">#2819</a>)</li> <li>Debian Sources (<a href="https://redirect.github.com/pygments/pygments/issues/2788">#2788</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2747">#2747</a>)</li> <li>Gleam (<a href="https://redirect.github.com/pygments/pygments/issues/2662">#2662</a>)</li> <li>GoogleSQL (<a href="https://redirect.github.com/pygments/pygments/issues/2820">#2820</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2814">#2814</a>)</li> <li>JSON5 (<a href="https://redirect.github.com/pygments/pygments/issues/2734">#2734</a>, <a href="https://redirect.github.com/pygments/pygments/issues/1880">#1880</a>)</li> <li>Maple (<a href="https://redirect.github.com/pygments/pygments/issues/2763">#2763</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2548">#2548</a>)</li> <li>NumbaIR (<a href="https://redirect.github.com/pygments/pygments/issues/2433">#2433</a>)</li> <li>PDDL (<a href="https://redirect.github.com/pygments/pygments/issues/2799">#2799</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2616">#2616</a>)</li> <li>Rego (<a href="https://redirect.github.com/pygments/pygments/issues/2794">#2794</a>)</li> <li>TableGen (<a href="https://redirect.github.com/pygments/pygments/issues/2751">#2751</a>)</li> <li>Vue.js (<a href="https://redirect.github.com/pygments/pygments/issues/2832">#2832</a>)</li> </ul> </li> <li> <p>Updated lexers:</p> <ul> <li>BQN: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2789">#2789</a>)</li> <li>C#: Fix number highlighting (<a href="https://redirect.github.com/pygments/pygments/issues/986">#986</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2727">#2727</a>), add <code>file</code> keyword (<a href="https://redirect.github.com/pygments/pygments/issues/2726">#2726</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2805">#2805</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2806">#2806</a>), add various other keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2745">#2745</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2770">#2770</a>)</li> <li>CSS: Add <code>revert</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2766">#2766</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2775">#2775</a>)</li> <li>Debian control: Add <code>Change-By</code> field (<a href="https://redirect.github.com/pygments/pygments/issues/2757">#2757</a>)</li> <li>Elip: Improve punctuation handling (<a href="https://redirect.github.com/pygments/pygments/issues/2651">#2651</a>)</li> <li>Igor: Add <code>int</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2801">#2801</a>)</li> <li>Ini: Fix quoted strings with embedded comment characters (<a href="https://redirect.github.com/pygments/pygments/issues/2767">#2767</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2720">#2720</a>)</li> <li>Java: Support functions returning types containing a question mark (<a href="https://redirect.github.com/pygments/pygments/issues/2737">#2737</a>)</li> <li>JavaScript: Support private identiiers (<a href="https://redirect.github.com/pygments/pygments/issues/2729">#2729</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2671">#2671</a>)</li> <li>LLVM: Add <code>splat</code>, improve floating-point number parsing (<a href="https://redirect.github.com/pygments/pygments/issues/2755">#2755</a>)</li> <li>Lua: Improve variable detection, add built-in functions (<a href="https://redirect.github.com/pygments/pygments/issues/2829">#2829</a>)</li> <li>Macaulay2: Update to 1.24.11 (<a href="https://redirect.github.com/pygments/pygments/issues/2800">#2800</a>)</li> <li>PostgreSQL: Add more <code>EXPLAIN</code> keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2785">#2785</a>), handle <code>/</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2774">#2774</a>)</li> <li>S-Lexer: Fix keywords (<a href="https://redirect.github.com/pygments/pygments/issues/2082">#2082</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2750">#2750</a>)</li> <li>TransactSQL: Fix single-line comments (<a href="https://redirect.github.com/pygments/pygments/issues/2717">#2717</a>)</li> <li>Turtle: Fix triple quoted strings (<a href="https://redirect.github.com/pygments/pygments/issues/2744">#2744</a>, <a href="https://redirect.github.com/pygments/pygments/issues/2758">#2758</a>)</li> <li>Typst: Various improvements (<a href="https://redirect.github.com/pygments/pygments/issues/2724">#2724</a>)</li> <li>Various: Add <code>^</code> as an operator to Matlab, Octave and Scilab (<a href="https://redirect.github.com/pygments/pygments/issues/2798">#2798</a>)</li> <li>Vyper: Add <code>staticcall</code> and <code>extcall</code> (<a href="https://redirect.github.com/pygments/pygments/issues/2719">#2719</a>)</li> </ul> </li> </ul> <ul> <li>Mark file extensions for <code>HTML/XML+Evoque</code> as aliases (<a href="https://redirect.github.com/pygments/pygments/issues/2743">#2743</a>)</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/pygments/pygments/commit/b583de4794e94b4dc4c2da03a7c29f462482293e"><code>b583de4</code></a> Prepare 2.19.1 release.</li> <li><a href="https://github.com/pygments/pygments/commit/c13f3f11b8594decd01a8867e17a1a078ba2defd"><code>c13f3f1</code></a> Prepare 2.19.1 release.</li> <li><a href="https://github.com/pygments/pygments/commit/cdbcd43227ea838909abada93533013a99b564c7"><code>cdbcd43</code></a> Add regression test for .ini issue, update CHANGES.</li> <li><a href="https://github.com/pygments/pygments/commit/5792a21f452cd85c40c5a45bd6d69abb4d3a6d3e"><code>5792a21</code></a> Update CHANGES.</li> <li><a href="https://github.com/pygments/pygments/commit/a9858663ed85219ed7475f5877b22b9cb49f660f"><code>a985866</code></a> Merge pull request <a href="https://redirect.github.com/pygments/pygments/issues/2835">#2835</a> from kartben/fix_ini_double_quotes</li> <li><a href="https://github.com/pygments/pygments/commit/5822fd1fda4ded57651b6e95664da2c37bd0ed58"><code>5822fd1</code></a> Fix Lua regressions.</li> <li><a href="https://github.com/pygments/pygments/commit/673d8243c1c66363c83ae5467b4cecf13b506f3c"><code>673d824</code></a> Fix quoted string handling</li> <li><a href="https://github.com/pygments/pygments/commit/43bf86fb86f0a3a4bacedc65eace650947ecee51"><code>43bf86f</code></a> Improve example regex in the docs.</li> <li><a href="https://github.com/pygments/pygments/commit/452ac621811e946c8276c298dc318343d63371e4"><code>452ac62</code></a> Move on past 2.19.0.</li> <li><a href="https://github.com/pygments/pygments/commit/62dff316900a548aabf741d662b79edc39ed78b5"><code>62dff31</code></a> Prepare 2.19 release.</li> <li>Additional commits viewable in <a href="https://github.com/pygments/pygments/compare/2.18.0...2.19.1">compare view</a></li> </ul> </details> <br /> Updates `sphinx-reredirects` from 0.1.2 to 0.1.6 <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/9c21d3b53855a7783c00becbbdc60ed509ba84bb"><code>9c21d3b</code></a> chore: release 0.1.6</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/638f011c6406ab92b7ca96d14cfd1da4bf108ff4"><code>638f011</code></a> Merge branch 'davidekete-preserve-url-fragments'</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/e50560fcc30a187d50412d47a7e74c286a7eff63"><code>e50560f</code></a> Merge branch 'main' into preserve-url-fragments</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/a0822b53aa33c624a086160ee6f17efaf27b3c6a"><code>a0822b5</code></a> feat: update default HTML template to preserve url fragments</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/29503e30720d151109e4cf38708d44bdde388982"><code>29503e3</code></a> style: reformatted with prettier</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/19207de769213abd98214db4741428ace73e043e"><code>19207de</code></a> chore: setup maintenance tools</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/4671309394be569e15cf004598242588bdbd9ce7"><code>4671309</code></a> feat: update FAQ to match new default template</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/36c6a8bb7126d5e3d28c69525bb4747da744e30b"><code>36c6a8b</code></a> feat: update default HTML template to preserve url fragments</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/7b3cf64a77893e69cdccffb228dd5df8b5b1bff9"><code>7b3cf64</code></a> docs: Update LICENSE to MIT</li> <li><a href="https://github.com/documatt/sphinx-reredirects/commit/1fb15c82b8951a5701301f774497627a77cb2900"><code>1fb15c8</code></a> docs: create README.md</li> <li>Additional commits viewable in <a href="https://github.com/documatt/sphinx-reredirects/compare/v0.1.2...v0.1.6">compare view</a></li> </ul> </details> <br /> Updates `urllib3` from 2.2.3 to 2.3.0 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>2.3.0</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Features</h2> <ul> <li>Added <code>HTTPResponse.shutdown()</code> to stop any ongoing or future reads for a specific response. It calls <code>shutdown(SHUT_RD)</code> on the underlying socket. This feature was <a href="https://opencollective.com/urllib3/contributions/815307">sponsored by LaunchDarkly</a>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2868">urllib3/urllib3#2868</a>)</li> <li>Added support for JavaScript Promise Integration on Emscripten. This enables more efficient WebAssembly requests and streaming, and makes it possible to use in Node.js if you launch it as node <code>--experimental-wasm-stack-switching</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3400">urllib3/urllib3#3400</a>)</li> <li>Added the <code>proxy_is_tunneling</code> property to <code>HTTPConnection</code> and <code>HTTPSConnection</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3285">urllib3/urllib3#3285</a>)</li> <li>Added pickling support to <code>NewConnectionError</code> and <code>NameResolutionError</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3480">urllib3/urllib3#3480</a>)</li> </ul> <h2>Bugfixes</h2> <ul> <li>Fixed an issue in debug logs where the HTTP version was rendering as "HTTP/11" instead of "HTTP/1.1". (<a href="https://redirect.github.com/urllib3/urllib3/issues/3489">urllib3/urllib3#3489</a>)</li> </ul> <h2>Deprecations and Removals</h2> <ul> <li>Removed support for Python 3.8. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3492">urllib3/urllib3#3492</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/urllib3/urllib3/compare/2.2.3...2.3.0">https://github.com/urllib3/urllib3/compare/2.2.3...2.3.0</a></p> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>2.3.0 (2024-12-22)</h1> <h2>Features</h2> <ul> <li>Added <code>HTTPResponse.shutdown()</code> to stop any ongoing or future reads for a specific response. It calls <code>shutdown(SHUT_RD)</code> on the underlying socket. This feature was <code>sponsored by LaunchDarkly <https://opencollective.com/urllib3/contributions/815307></code><strong>. (<code>[#2868](https://github.com/urllib3/urllib3/issues/2868) <https://github.com/urllib3/urllib3/issues/2868></code></strong>)</li> <li>Added support for JavaScript Promise Integration on Emscripten. This enables more efficient WebAssembly requests and streaming, and makes it possible to use in Node.js if you launch it as <code>node --experimental-wasm-stack-switching</code>. (<code>[#3400](https://github.com/urllib3/urllib3/issues/3400) <https://github.com/urllib3/urllib3/issues/3400></code>__)</li> <li>Added the <code>proxy_is_tunneling</code> property to <code>HTTPConnection</code> and <code>HTTPSConnection</code>. (<code>[#3285](https://github.com/urllib3/urllib3/issues/3285) <https://github.com/urllib3/urllib3/issues/3285></code>__)</li> <li>Added pickling support to <code>NewConnectionError</code> and <code>NameResolutionError</code>. (<code>[#3480](https://github.com/urllib3/urllib3/issues/3480) <https://github.com/urllib3/urllib3/issues/3480></code>__)</li> </ul> <h2>Bugfixes</h2> <ul> <li>Fixed an issue in debug logs where the HTTP version was rendering as "HTTP/11" instead of "HTTP/1.1". (<code>[#3489](https://github.com/urllib3/urllib3/issues/3489) <https://github.com/urllib3/urllib3/issues/3489></code>__)</li> </ul> <h2>Deprecations and Removals</h2> <ul> <li>Removed support for Python 3.8. (<code>[#3492](https://github.com/urllib3/urllib3/issues/3492) <https://github.com/urllib3/urllib3/issues/3492></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/2f68c5363ef632d73dd4d9300289d7ce5ff275b4"><code>2f68c53</code></a> Release 2.3.0</li> <li><a href="https://github.com/urllib3/urllib3/commit/f7bcf6986fa9c43fc7884b648f66688db593b491"><code>f7bcf69</code></a> Add HTTPResponse.shutdown() to stop blocking reads (<a href="https://redirect.github.com/urllib3/urllib3/issues/3527">#3527</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/e94224931feddf9e12bb25452bf0d0c21da8a7e0"><code>e942249</code></a> Update .readthedocs.yml addressing a deprecation (<a href="https://redirect.github.com/urllib3/urllib3/issues/3534">#3534</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/905549d64a948abd4b6962edecb8dd5569166275"><code>905549d</code></a> Upgrade Python pre-commit tools (<a href="https://redirect.github.com/urllib3/urllib3/issues/3529">#3529</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/716d8340b89f7d8ec549579d14e3c0a7e5f859a5"><code>716d834</code></a> Fix PyPI publish with Core metadata 2.4 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3531">#3531</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/7ab935c6ddd546c7d57b03c0269685c61c8e60c6"><code>7ab935c</code></a> Address zizmor issues</li> <li><a href="https://github.com/urllib3/urllib3/commit/181357ed2aecf9c523f2664c05f176cde9692994"><code>181357e</code></a> Bump Quart to fix CI (<a href="https://redirect.github.com/urllib3/urllib3/issues/3524">#3524</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/0e7e0df0586573d51c78076d4871050783bec7c8"><code>0e7e0df</code></a> Start testing with Python 3.14</li> <li><a href="https://github.com/urllib3/urllib3/commit/d67d09bfd04ecdae1280a563d06b32949befaf71"><code>d67d09b</code></a> Bump mypy version</li> <li><a href="https://github.com/urllib3/urllib3/commit/20032ec38a09680bcfb6d97b4c43b276af43cc64"><code>20032ec</code></a> Drop unneeded dependency pins and a warning filter</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/2.2.3...2.3.0">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Group local memory functions depend on inlining pass. When all
optimizations are disabled then they are not inlined. If a user adds
several group local memory calls with the same template argument
then only one group local memory function is specialized and then one
memory buffer is allocated. Thus all variables that save a result of
the group local memory call point to the same buffer.
Enable AlwaysInliner pass even when all llvm passes are disabled as
a workaround.
A More accurate solution with call graph analysis will be added later.
E2E test for this fix is added here: intel/llvm-test-suite#217