Inferred tristate not currently supported by nextpnr; upgrade #96

todo · 2018-10-31T15:16:01Z

litex-buildenv/targets/icebreaker/base.py

Lines 95 to 100 in f6daba4

    
           # TODO: Inferred tristate not currently supported by nextpnr; upgrade 
        
           # to spiflash4x when possible. 
        
           self.submodules.spiflash = spi_flash.SpiFlashSingle( 
        
               platform.request("spiflash"), 
        
               dummy=platform.spiflash_read_dummy_bits, 
        
               div=platform.spiflash_clock_div)

This issue was generated by todo based on a `TODO` comment in `f6daba4` when #95 was merged. cc @cr1901.

The text was updated successfully, but these errors were encountered:

* edid-decode changed from b2da151 to 5eeb151 * 5eeb151 - edid-decode: replace AdobeYCC/RGB by opYCC/RGB <Hans Verkuil> * litedram changed from 7a5ac75 to ea1ac4d * ea1ac4d - s6ddrphy: Pass missing nranks parameter. <Tim 'mithro' Ansell> * e5696ad - frontend/ecc: add enable csr <Florent Kermarrec> * e6ef89a - frontend/axi: optimize burst2beat timings <Florent Kermarrec> * 6941285 - frontend/ecc: split Write/Read path and add buffer to improve timings <Florent Kermarrec> * 041817d - frontend/ecc: use csr instead of signal for control <Florent Kermarrec> * b145b0c - frontend/axi: fix write response implementation <Florent Kermarrec> * d23dbf6 - phy: add nranks to all phys <Florent Kermarrec> * 461b076 - frontend/ecc: add ecc adapter <Florent Kermarrec> * c84b587 - frontend: add initial ecc code (still need to be integrated) <Florent Kermarrec> * a8d2672 - phy/s7ddrphy_halfrate_bl8: don't generate dqs pre/post-amble, needs simulation <Florent Kermarrec> * 5719d71 - phy/s7ddrphy_halfrate_bl8: fix cs_n <Florent Kermarrec> * 36fa324 - core/multiplexer: fix regression (introduced by multirank support) <Florent Kermarrec> * 42d0e5b - core/multiplexer: add more information on odt fixme <Florent Kermarrec> * 919b756 - phy/model: pass nranks to Interface <Florent Kermarrec> * f5c7b61 - multirank: set default nranks to 1 if not specified <Florent Kermarrec> * f3d403f - s7ddrphy: fix typo (reset_n --> cs_n) <Florent Kermarrec> * 37f1dec - multirank: one cs_n/cke/odt/clk per rank <Florent Kermarrec> * 3e17d18 - phy: add halfrate_bl8 variant for s7ddrphy <Florent Kermarrec> * 412e9a5 - Merge pull request timvideos#38 from enjoy-digital/multirank <enjoy-digital> |\ | * 8ddc6c7 - drive odt of all ranks, fixes and test non regression with 1 rank <Florent Kermarrec> | * d4f434d - dfii: send command to all ranks <Florent Kermarrec> | * b1c2739 - initial multirank support (nbankmachines = nranks * (2**bankbits)) <Florent Kermarrec> * | d9c2430 - Merge pull request timvideos#36 from JohnSully/timing_1 <enjoy-digital> |\ \ | |/ |/| | * efd7a47 - Fix failing timing <> * | cc481be - examples: add sdram_rank_nb and user_ports_id_width <Florent Kermarrec> |/ * 849b1f6 - frontend/axi: generate rlast signal <Florent Kermarrec> * 1fa73e4 - test: update <Florent Kermarrec> * 7b61b68 - sdram_init: min value for wr is 5 <Florent Kermarrec> * 1652ab9 - examples/litedram_gen: fix address width of axi ports (addressing in bytes not words) <Florent Kermarrec> * 1e64b7f - examples/litedram_gen: expose resp signals to user <Florent Kermarrec> * 700f76c - frontend/axi: add resp signals <Florent Kermarrec> * 47fed1b - frontend/axi: add last limitation <Florent Kermarrec> * de69867 - examples/litedram_gen: expose last signals to user <Florent Kermarrec> * e8bd782 - examples/litedram_gen: expose burst signals to user <Florent Kermarrec> * e1598ce - phy/s7ddrphy: fix BL8 assert <Florent Kermarrec> * ebba39d - README: update <Florent Kermarrec> * e528e92 - phy/s7ddrphy: add assertion to avoid generating 1:2 controller with DDR3 (needs BL8 support in the PHY) <Florent Kermarrec> * 6017e7a - phy/s7ddrphy: fix dqs_sys_latency for DDR2 <Florent Kermarrec> * 7b42739 - phy/s7ddrphy: simplify cmd/dat phases computation and remove restrictions. <Florent Kermarrec> * 6148618 - phy/s7ddrphy: use dict in get_cl_cw function <Florent Kermarrec> * 5e4dca9 - add examples with standalone cores for arty and genesys2 <Florent Kermarrec> * dce4ede - README: update <Florent Kermarrec> * f6797a1 - test/test_axi: add burst wrap test and fix code <Florent Kermarrec> * 47988d8 - frontend/axi: remove alignment limitation since we are in fact supporting unaligned transfers as described in the specification. <Florent Kermarrec> * 6cc42c6 - frontend/axi: add wrap burst support <Florent Kermarrec> * 9c729ae - core: replace adr with addr on native interface (closer to AXI and allow some simplifications) <Florent Kermarrec> * 0506708 - core/controller: remove simulation workaround <Florent Kermarrec> * bc8a9ce - README: update <Florent Kermarrec> * 6f7ae84 - frontend/axi: increase default depth of buffers to improve performance <Florent Kermarrec> * ed7eef1 - phy/s7ddrphy: fix preamble/posamble latency when with_odelay (-1 since dqs clk is not shifted) <Florent Kermarrec> * c37d3af - frontend/bist: only keep random datas (we can generate random addresses with control) <Florent Kermarrec> * b1e734b - frontend/bist: only use cdc on registers if needed (ie not in sys clock domain) <Florent Kermarrec> * 92c8513 - frontend/axi: add buffer to accept command before converting burst to beats <Florent Kermarrec> * c15c474 - test/test_axi: split reads/writes generators <Florent Kermarrec> * 95cb7cd - test: rename read/write generators to handlers <Florent Kermarrec> * d5d6737 - frontend/axi: fix read id <Florent Kermarrec> * 10229d1 - test/test_axi: improve test_axi2native <Florent Kermarrec> * 295f016 - frontend/axi: add features/limitations <Florent Kermarrec> * 6a46ea3 - test/test_bist: add generator test, remove async test <Florent Kermarrec> * 7677a85 - core/bankmachine: expose cmd_buffer_buffered param and small cleanup <Florent Kermarrec> * liteeth changed from 24b0d2b to 3d86844 * 3d86844 - core/mac/sram: fix code refactoring <Florent Kermarrec> * 5106bcd - core/mac/sram: simplify last_be code <Florent Kermarrec> * ce72e34 - core/mac: pass endianness and use if for last_be gen/check <Florent Kermarrec> * 94af3d6 - README: update and rename example_designs to examples <Florent Kermarrec> * litepcie changed from a97a691 to 3e8de2d * 3e8de2d - phy/s7pciephy: remove clock constraints from phy <Florent Kermarrec> * 6f2d97a - README: update and rename example_designs to example <Florent Kermarrec> * litesata changed from 002cd25 to fb72044 * fb72044 - README: update and rename example_designs to examples <Florent Kermarrec> * litescope changed from f26e36e to 686db4f * 686db4f - Merge pull request timvideos#12 from xobs/default-length <enjoy-digital> |\ | * 4f8b9a3 - analyzer-driver: use default depth from config <Sean Cross> |/ * 7c1c62e - README: update and rename example_designs to examples <Florent Kermarrec> * 3567b68 - dump/vcd: fix code generation <Florent Kermarrec> * 182b683 - core: change cd parameter to clock_domain (keep retro compatibility for now) <Florent Kermarrec> * liteusb changed from e841c56 to 0a9110f * 0a9110f - README: update and rename example_designs to examples <Florent Kermarrec> * litevideo changed from 7b4240f to 13d85a1 * 13d85a1 - README: update <Florent Kermarrec> * litex changed from 7a14b75c to 537b0e90 * 537b0e90 - Merge pull request timvideos#101 from cr1901/icestorm-migen-pull <enjoy-digital> |\ | * 5c83c881 - Pull in b2740d9 from Migen. nextpnr now default, write out build scripts on dry run. <William D. Jones> * | 9c6f76f1 - bios/sdram: mode sdhw() <Florent Kermarrec> * | a44bedd5 - bios/sdram: add missing #ifdef <Florent Kermarrec> * | 0e68daeb - targets: self.pll_sys --> pll_sys <Florent Kermarrec> * | 1468b9f3 - bios/sdram: show all read scans when failing. <Florent Kermarrec> * | 07e4c183 - cpu/lm32: re-enable multiplier/divider in minimal variant (does not seem to work correctly on hardware otherwise) <Florent Kermarrec> * | df3f003e - soc_sdram: update with litedram <Florent Kermarrec> |/ * bebc667d - Merge pull request timvideos#99 from cr1901/mk-copy-main-ram <enjoy-digital> |\ | * bd70ba27 - Add COPY_TO_MAIN_RAM generated Makefile variable to distinguish systems with/without main_ram region. <William D. Jones> * | 69716852 - Merge pull request timvideos#100 from cr1901/tinyprog-fix <enjoy-digital> |\ \ | * | c812321a - lattice/programmer: Use --program-image option with tinyprog if address is given. <William D. Jones> | |/ * | 12a89447 - soc_sdram: revert vivado l2 cache workaround (still seems to cause issues on some cases...) <Florent Kermarrec> * | 2b786065 - targets: pass endianness to LiteEThMAC, tftp working with RISC-V, still need to fix txlen <Florent Kermarrec> * | 26963d62 - libnet/microudp: (WIP) fix endianness issues <Jean-François Nguyen> * | d9d0320d - Merge pull request timvideos#98 from jfng/fix_typo <enjoy-digital> |\ \ | * | 22c01313 - fix typo and unused include <Jean-François Nguyen> |/ / * | fb24ac0e - cpu/minerva: add workaround on import until code is released <Florent Kermarrec> * | 9cfae4df - setup.py: create litex_sim exec to ease simulation <Florent Kermarrec> * | 8f377307 - add Minerva support <Jean-François Nguyen> * | 1944289e - litex_server: update pcie and remove bar_size parameter <Florent Kermarrec> |/ * c5a2d6f3 - Merge pull request timvideos#96 from cr1901/tinyfpga_bx <Tim Ansell> |\ | * 29492624 - build/platforms: Add TinyFPGA BX board and programmer. <William D. Jones> * | 3cb754da - Merge pull request timvideos#95 from cr1901/lm32-lite <Tim Ansell> |\ \ | * | ed507d61 - Add lm32 "lite" variant, remove mult/div from "minimal" and update compiler flags accordingly. <William D. Jones> | |/ * | 28cd2da2 - README: update <Florent Kermarrec> |/ * 05c7b9da - Merge pull request timvideos#94 from cr1901/nextpnr <enjoy-digital> * 7af89efc - lattice/icestorm: Add nextpnr pnr as alternate pnr tool. <William D. Jones> * migen changed from 0.6.dev-162-ga6082d5 to 0.6.dev-168-gca0df1c * ca0df1c - build.platforms: add ice40_up5k_b_evn platform. <whitequark> * b2740d9 - build.lattice.icestorm: write build script even on dry run. <whitequark> * 2a7e33e - Emit `default_nettype none. <David Craven> * cff127d - build/platforms: Add TinyFPGA BX board and programmer. <William D. Jones> * 97e2651 - kasli: set USERID and USR_ACCESS <Robert Jördens> * 58894fb - lattice/icestorm: Add nextpnr as alternate pnr tool. (timvideos#124) <William D. Jones> Full submodule status -- 5eeb151a748788666534d6ea3da07f90400d24c2 edid-decode (remotes/origin/HEAD) a628956da7dc794e6e3c95b31ff9ce3af58bc763 flash_proxies (remotes/origin/HEAD) ea1ac4d6d72ecb9a65fb884857db8ba6851f3230 litedram (heads/s6-rank-fix) 3d868449e9c38a00524cff8ed2bf5dec2fc0d858 liteeth (remotes/origin/HEAD) 3e8de2d1ef347a1fdfbd01601b1bbdc4558dd90a litepcie (remotes/origin/HEAD) fb72044dabd121b4643a936b21ca3bf3aed75499 litesata (remotes/origin/HEAD) 686db4f3cd71bade8dd777d112e66797662f5bad litescope (remotes/origin/HEAD) 0a9110f901182a1233cc4e64b6e39175f6784621 liteusb (remotes/origin/HEAD) 13d85a1fe360678bebd57c55f1b35988c655ae95 litevideo (remotes/origin/HEAD) 537b0e9058e6a5b77f434f46f3a56849c82064bd litex (remotes/origin/HEAD) ca0df1c148950213ff0551a8ec7c188a5910906e migen (0.6.dev-168-gca0df1c)

* edid-decode changed from dcc8b83 to b2da151 * b2da151 - edid-decode: add --extract and --check options <Hans Verkuil> * e9ffafc - edid-decode: add options and new output formats <Hans Verkuil> * ab18bef - edid-decode: add HDMI Forum VSDB fields for HDMI 2.1b <Hans Verkuil> * 8c81ccf - Add Samsung UE49KS8005 EDID <Hans Verkuil> * 7d8f41f - edid-decode: simplify data block parsing <Hans Verkuil> * eee377b - edid-decode: add support for QuantumData 980 EDID file format <Hans Verkuil> * 4437dd9 - edid-decode: use const for unsigned char pointers to the EDID <Hans Verkuil> * 3b26b8a - edid-decode: fix wrong sample rate unit <Hans Verkuil> * 9cb3744 - edid-decode: fix spurious warning about string termination <Hans Verkuil> * bc1e846 - edid-decode: reformat to linux kernel coding style <Hans Verkuil> * 7684918 - edid-decode: README: updates <Hans Verkuil> * 9e59ba9 - edid-decode: update links, add README <Hans Verkuil> * 0a454bc - makefile: also honor LDFLAGS <Adam Jackson> * litedram changed from 45da365 to 7a5ac75 * 7a5ac75 - test/test_axi: improve test_axi2native <Florent Kermarrec> * d53832d - frontend/axi: split LiteDRAMAXI2Native (write path and read path) <Florent Kermarrec> * c846b8b - frontend/axi: add burst support (fixed/incr) <Florent Kermarrec> * 3fa77c8 - phy/s6ddrphy: use cwl only for DDR3 <Florent Kermarrec> * d9b5bb7 - frontend/bist: support axi with addressing in bytes <Florent Kermarrec> * 1370617 - frontend/axi: addressing in bytes not internal dwords <Florent Kermarrec> * 06f841d - sdram_init: compute write recovery cycles (we were using max value) <Florent Kermarrec> * 53c75f5 - phy/s7ddrphy: add dqs preamble/postamble <Florent Kermarrec> * 1c083ea - sdram_init: split init_sequence generation and header geneneration and add .py header genration <Florent Kermarrec> * d7d60cf - Merge branch 'master' of http://github.com/enjoy-digital/litedram <Florent Kermarrec> |\ | * cd330b4 - Merge pull request timvideos#28 from AlphamaxMedia/refactor-master <enjoy-digital> | |\ | | * 818c678 - update module settings to reflect latest changes <bunnie> | | * c9b8db5 - i think there's a missing "self" in the params <bunnie> * | | ae6f10a - sdram_init: use 60ohm as rtt_wr default value <Florent Kermarrec> |/ / * | 522cbc9 - frontend: add AXI support for dma and bist <Florent Kermarrec> * | 5715734 - frontend: add initial AXI support <Florent Kermarrec> * | 97349bc - frontend: rename bridge to wishbone and LiteDRAMWishboneBridge to LiteDRAMWishbone2Native <Florent Kermarrec> * | 2b20c11 - add LiteDRAMNativePort to prepare for AXI, change some internals and API of get_port but keep retro-compatibility - LiteDRAMPort -> LiteDRAMNativePort - aw -> address_width - dw -> data_width - cd -> clock_domain <Florent Kermarrec> |/ * 0b6e21a - improve ddr3 electrical settings <Florent Kermarrec> * 697eaaf - add board tuning parameters <bunnie> * 9a57c4e - phy/s7ddrphy: add DDR3-800 timings <Florent Kermarrec> * 9401b92 - move sdram_init to litedram <Florent Kermarrec> * 209dc0d - frontend/bist: add dynamic random data and addressing <Florent Kermarrec> * b13962c - core/multiplexer: fix 1:1 <Florent Kermarrec> * a215ac7 - core/multiplexer: fix count signal width (when max<2) <Florent Kermarrec> * ad8438f - core/controller: enable auto_precharge by default <Florent Kermarrec> * bba4913 - core/bankmachine: fix auto_precharge (OR on the two buffers for req.lock), don't need to wait for precharge timer to issue auto-precharge <Florent Kermarrec> * 2e362ee - core/bankmachine: add auto_precharge setting to enable/disable auto_precharge mode (disabled by defaut) <Florent Kermarrec> * 6d23421 - core/bankmachine: rename cmd_bufferPre to cmd_buffer_lookahead <Florent Kermarrec> * 23358b5 - core/multiplexer: use self.submodules for timing controllers, fix tFAW count <Florent Kermarrec> * db4ec67 - Merge pull request timvideos#24 from JohnSully/AutoPrecharge <enjoy-digital> |\ | * 627cccd - Fix tCCD timing which watched the wrong command <> | * 16a852b - Revert "core/refresher: synchronize valid" <> | * a4be642 - Fix multiple timings ignored <> | * 771ccfd - Merge branch 'master' of https://github.com/enjoy-digital/litedram into AutoPrecharge <> | |\ | |/ |/| * | 6620a91 - core/refresher: synchronize valid <Florent Kermarrec> * | b2f1f29 - core/bankmachine: update comments <Florent Kermarrec> * | c1b1b07 - core/multiplexer: synchronize ready on tXXDController and tFAWcontroller to improve timings <Florent Kermarrec> * | 147466b - multiplexer: create timing controllers module and simplify <Florent Kermarrec> * | eeb57ad - Merge pull request timvideos#23 from JohnSully/outoforder <enjoy-digital> |\ \ | | * 3206985 - When auto-precharging assert track_close <> | | * 74279ea - Enable auto-precharge <> | |/ | * 03a2ad6 - Ensure out of order is on a per-bank basis <> | * 86b3e2d - Add reorder flag to the crossbar <> | * 77c513d - Merge upstream. UNTESTED <> | |\ | |/ |/| * | c28a754 - test: update <Florent Kermarrec> * | f7f8452 - core: make rdata_bank optional (break cdc when enabled), fix some usecases <Florent Kermarrec> * | 873b970 - frontend: avoid breaking api with last rbank change (use bankbits_max), some cleanup <Florent Kermarrec> * | 26f3f01 - Merge pull request timvideos#21 from JohnSully/outoforder <enjoy-digital> |\ \ * \ \ 74c3c09 - Merge pull request timvideos#20 from bunnie/400mhz-pr <enjoy-digital> |\ \ \ | * | | 4823058 - Adding comment to iodelay_tap_average dictionary. <Tim Ansell> | * | | d986b60 - add 400MHz tap setting (valid for -3 and -2/2E speed grades) <bunnie> * | | | e02a251 - core: make tRRD definition optional and some cosmetic changes <Florent Kermarrec> * | | | 5d74eb2 - Merge pull request timvideos#19 from JohnSully/timing <enjoy-digital> |\ \ \ \ | |/ / / |/| | | | | | * 8266a6e - Prevent compilation failures when tRRD == 0 <> | | | * ed4be0b - Add write bank to out of order interface <> | | |/ | | * bfa1d6a - remove debug prints <> | | * 2fa2a6d - Initial implementation of out of order controller <> | | * f1fea6d - Correct tWTR timing: 1) timing starts after the completion of the write burst, 2) We don't need to wait on switches if a write hasn't taken place recently <> | |/ | * eb3f4a0 - fix CAS to CAS timings (needs to account for multiple banks) <> | * f0f5e60 - Add tRRD timing checks, and fix tFAW so it considers all banks <> |/ * f0f067f - phy/s7ddrphy: add assert to make sure cmd/dat phases are not identical <Florent Kermarrec> * f560b9c - core/bankmachine: remove auto-prechage since introducing a regression, we'll need to do more simulation before integrating <Florent Kermarrec> * 2736ebc - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * e830526 - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * 6d96bcc - core/bankmachine: fix cas_count size when tccd == 1 <Florent Kermarrec> * f4ad65e - core/controller: use fixed burst_length for each memtype (even in 1:2, use BL8 for DDR3 since BL4 is not efficient) <Florent Kermarrec> * eee89d4 - phy/s7ddrphy: add ddr2 support <Florent Kermarrec> * c9f2e30 - core/controller: add simulation workaround for 1:2 ddr3 phy <Florent Kermarrec> * bd09471 - phy/s7ddrphy: add 1:2 frequency ratio support (BC4 mode for now) <Florent Kermarrec> * dec5378 - core/bankmachine: add CAS to CAS support (tCCD) <Florent Kermarrec> * 5bc3575 - modules: add retro-compat on MT41J256M16 <Florent Kermarrec> * c4dad24 - modules: add description, add speedgrade support and improve tWTR/tFAW definition (in ck, ns or greater of ck/ns) <Florent Kermarrec> * 370b05e - core/bankmachine: add Four Activate Window support (tFAW) <Florent Kermarrec> * d0ff536 - phy/s7ddrphy: add specific bitslip reset <Florent Kermarrec> * 8ba7fca - core/bankmachine: simplify row change detection for auto precharge <Florent Kermarrec> * 3255a33 - core/bankmachine: remove specific case for small cmd_buffer_depth <Florent Kermarrec> * d150e3b - Merge pull request timvideos#12 from JohnSully/master <enjoy-digital> |\ | * 6b0d5ce - Prevent spurious precharge all commands caused by leaving A10 asserted during precharge <> | * d0fcfb1 - Auto-precharge now only fires when it needs to <> * | 82b7199 - modules: fix tWTR for DDR3 modules (expressed in sys_clk not ns) <Florent Kermarrec> * | f4b92b6 - phy/s7ddrphy: add nphases parameter to get functions <Florent Kermarrec> * | d7d5d4a - phy/s7ddrphy: add iodelay_clk_freq parameter <Florent Kermarrec> * | f47ddb3 - phy/s7ddrphy: add get_cl_cw function <Florent Kermarrec> * | d9da7c5 - phy/s7ddrphy: compute phy settings automatically (based on tck) and add DDR3-1066/1333/1600 support. <Florent Kermarrec> * | ba16ebf - phy: add common Series7 PHY (Artix7, Kintex7 & Virtex7) with or without ODELAY. Keep backward compatibility on imports. <Florent Kermarrec> * | 2bd7707 - modules: add MT18KSF1G72HZ_1G6 <Florent Kermarrec> |/ * c238149 - phy/kusddrphy: follow more Xilinx recommandations <Florent Kermarrec> * liteeth changed from 33afda7 to 24b0d2b * 24b0d2b - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * 4edba99 - phy: remove s6rgmii (not working correctly). <Florent Kermarrec> * 6b872fd - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * 40d91f0 - phy: use rx_dv instead of dv <Florent Kermarrec> * ba2fdc5 - README: add 1000BaseX phy <Florent Kermarrec> * a2dbdd6 - phy: add a7_1000basex phy (from misoc) <Florent Kermarrec> * 95849a0 - core/icmp: use buffered=True on buffer to allow tools to use block rams <Florent Kermarrec> * litepcie changed from 8bc328f to a97a691 * a97a691 - example_designs: update/fix test_regs.py <Florent Kermarrec> * d8e602c - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * 0ac08e5 - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * cf0a3e5 - phy/kintex7: fix/update <Florent Kermarrec> * 96309fc - core/msi: add transmit_interval parameter to avoid continous retransmission (causing issue with some configurations) <Florent Kermarrec> * bb29b81 - core/tlp/reordering: use buffered=True on tag_buffer fifo <Florent Kermarrec> * 418e980 - frontend/wishbone: add shadow_base parameter <Florent Kermarrec> * 3df4217 - test/test_dma: test both 64b and 128b datapaths and fix writer <Florent Kermarrec> * 29a7d16 - test/test_wishbone: test both 64b and 128b datapaths <Florent Kermarrec> * 08a8daf - phy/s7pciephy: last is indicated in tuser (and not tlast) for 128 bits datapath <Florent Kermarrec> * a20e71b - core/tlp/packetizer/depacketizer: fixes for 128 bits datapath <Florent Kermarrec> * 93233fe - frontend/dma: cleanup control bits <Florent Kermarrec> * 0540a88 - frontend/dma/writer: avoid stalling pipeline when not enabled <Florent Kermarrec> * litesata changed from a559afb to 002cd25 * 002cd25 - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * 73cb6fa - example_designs: update <Florent Kermarrec> * fd5b38e - examples_designs/platforms: add genesys2 <Florent Kermarrec> * 236522b - example_designs/targets/bist: allow cpu_reset with both polarity <Florent Kermarrec> * 8bdc28e - Merge pull request timvideos#14 from felixheld/crc <enjoy-digital> |\ | * 7f61316 - core/link.py: make CRC calculation more pythonic <Felix Held> | * e497f33 - core/link.py: clarify comments in CRC implementation <Felix Held> * ec06424 - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * litescope changed from 9d5e605 to f26e36e * f26e36e - Merge pull request timvideos#11 from xobs/add-trigger-depth <enjoy-digital> |\ | * 71ffaa7 - add trigger depth option <bunnie> |/ * bfd06f8 - core: add FSM support (and example) <Florent Kermarrec> * 2ca58e4 - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * cd63a43 - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * f03345d - software/driver/analyzer: add get_instant_value to get instant value of one signal <Florent Kermarrec> * af5bfd1 - software/driver/analyzer: add assertions <Florent Kermarrec> * 3efaefa - example_designs: typo <Florent Kermarrec> * d919f90 - core: use bits_for(n) instead of max=n on Mux (fix case with only one group of signals) <Florent Kermarrec> * 6289e81 - example_designs: demonstrate new features <Florent Kermarrec> * e92f0b7 - example_designs/test: cleanup and simplify <Florent Kermarrec> * 2233bc2 - core: another cleanup/simplify pass <Florent Kermarrec> * a269e67 - software: add rising/falling edge support <Florent Kermarrec> * 65b7f08 - core: add full flag for trigger memory <Florent Kermarrec> * c0bab06 - core: add sequential-triggering and simplify control <Florent Kermarrec> * 26a8b89 - example_designs: update <Florent Kermarrec> * 8d4c1dd - core: simplify and run storage in "scope" clock domain to get rid of cd_ratio. <Florent Kermarrec> * liteusb changed from 23d6a68 to e841c56 * e841c56 - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * 7da831d - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * litevideo changed from 9b4169d to 7b4240f * 7b4240f - setup.py: fix exclude, add example_designs to exclude <Florent Kermarrec> * c39517a - setup.py: exclude sim, test, doc directories <Florent Kermarrec> * cb8cf59 - Merge pull request timvideos#19 from bunnie/terc4-data <enjoy-digital> * c704235 - additional debugging on capture <bunnie> * eab7078 - add data decoding to Terc4 decoder <bunnie> * eb263a8 - add ability to invert the HPD input <bunnie> * 7189562 - fix a default edid that works better with rpis <bunnie> * 33ed07d - currently commented, but the vestiges of introducing SS clocking <bunnie> * 49adfb4 - change the default edid to one that advertises a proper 1080p mode <bunnie> * 19437d0 - add dvimode/hdmimode setting bit for DE detection <bunnie> * 449d339 - add decoding of terc4 islands, proper DE extraction on HDMI <bunnie> * 447726f - add RGB input mode support to hdmi in <bunnie> * f5842bc - add some code to allow frame start offset trimming for genlock <bunnie> * 12aa4f9 - clarify the self vs local signal settings for easier probing <bunnie> * 9b3c93e - move BUFR->BUFG <bunnie> * 166dc57 - fix typo on naming <bunnie> * 33f8833 - change the genlock method from pulse to wholesale signal change <bunnie> * 784cc8c - changes needed for a basic genlock <bunnie> * litex changed from v0.1-319-gb7f7c8d1 to v0.1-423-g7a14b75c * 7a14b75c - Merge pull request timvideos#93 from phlipped/master <Tim Ansell> |\ | * 8b51c445 - Fix URL for liteUSB <phlipped> |/ * 0074bb88 - Merge pull request timvideos#91 from cr1901/ignore-fix <Tim Ansell> |\ | * dd480eb7 - .gitignore: litex/build contains valid source, so exclude from .gitignore. <William D. Jones> * | ff908e40 - Merge pull request timvideos#92 from cr1901/l2-gate <Tim Ansell> |\ \ | * | 3146109a - software/bios: Gate flush_l2_cache() if L2 Cache isn't present. <William D. Jones> | |/ * | 759e7d4d - bios/sdram: improve/simplify read window selection <Florent Kermarrec> * | 09776b77 - sim: run as root only when needed (ethernet module present) <Florent Kermarrec> * | 06e835a3 - builder: change call to get_sdram_phy_c_header and also pass timing_settings <Florent Kermarrec> * | ee26f8c5 - soc_sdram: cosmetic <Florent Kermarrec> * | 2db5424a - soc_sdram: vivado is now able to implement the l2_cache correctly (tested with vivado 2017.2 and >) <Florent Kermarrec> * | 45e9a42c - soc_core: add cpu_endianness <Florent Kermarrec> * | 3877d0f1 - builder: get_sdram_phy_header renamed to get_sdram_phy_c_header <Florent Kermarrec> * | c64e44ef - soc_sdram: use new LiteDRAMWishbone2Native and port.data_width <Florent Kermarrec> * | 2eeccc50 - vexriscv: update <Florent Kermarrec> * | eecc6f68 - soc/integration: move sdram_init to litedram <Florent Kermarrec> |/ * 077f9391 - Vexriscv: update csr-defs.h <Florent Kermarrec> * 4225c3b8 - update Vexriscv <Florent Kermarrec> * 95479385 - bios/sdram: changes to ease manual read window selection <Florent Kermarrec> * a760322f - litex_server: allow multiple clients to connect to the same server <Florent Kermarrec> * 8a69a47e - cpu/lm32: add minimal variant with no i/d cache, pipelined barrel shifter and multiplier (useful to build SoC on small FPGAs like ice40) <Florent Kermarrec> * cb5b4ac4 - bios/boot: flush all caches before running from ram <Florent Kermarrec> * 650ac186 - sim/verilator: catch ctrl-c on exit and revert default termios settings <Florent Kermarrec> * 0831ad54 - cpu_interace: use riscv64-unknown-elf if available else riscv32-unknown-elf <Florent Kermarrec> * 1610a7f3 - bios/sdram: fix read_level_scan result <Florent Kermarrec> * e07ca057 - Merge pull request timvideos#86 from pgielda/patch-1 <enjoy-digital> |\ | * 3c7890cd - Fix generating csr.csv file <Peter Gielda> |/ * 9fa234da - soc/intergration/cpu_interface: typo <Florent Kermarrec> * 22f645ad - bios/main: use edata instead of erodata <Florent Kermarrec> * 580efecc - picorv32: add reset signal <Florent Kermarrec> * 0429ee9f - soc/software/bios: add reboot command <Florent Kermarrec> * da751598 - soc/integration/soc_core: add Controller with reset, scratch and bus_errors registers <Florent Kermarrec> * 8ba56252 - soc/interconnect/wishbone: add Timeout to avoid stalling bus when not responding and generate error. <Florent Kermarrec> * c0989f65 - soc/cores/cpu: add reset signal <Florent Kermarrec> * 380f8b96 - Merge pull request timvideos#81 from xobs/vexriscv-to-wishbone <enjoy-digital> |\ | * fb145dac - tools: remove vexriscv_debug <Sean Cross> | * f17b8324 - vexriscv: reset wishbone bus on CPU reset <Sean Cross> | * c87ca4f1 - vexriscv: put debug bus directly on wishbone bus <Sean Cross> |/ * 20d6fcac - add litex_setup script to clone and install Migen, LiteX and LiteX's cores <Florent Kermarrec> * 8a311bf4 - build/generic_platform: use list for sources instead of set <Florent Kermarrec> * df7e5dbc - bios/sdram: add ERR_DDRPH_BITSLIP constant and some cleanup <Florent Kermarrec> * 1564b440 - soc/integration/soc_sdram: add assertion on csr_data_width since BIOS only support SDRAM initialization for csr_data_width=8 <Florent Kermarrec> * ae62fe07 - setup.pu: fix exclude <Florent Kermarrec> * c314193c - boards/plarforms/genesys2: replace user_dip_sw with user_sw <Florent Kermarrec> * 10dd55fd - boards/platforms/genesys2: add minimum HPC connectors to be able to test SATA, add programmer parameter <Florent Kermarrec> * b19844d1 - setup.py: exclude test, sim, doc directories <Florent Kermarrec> * 85308672 - software/bios/linker: revert data section since required by RISC-V compiler <Florent Kermarrec> * 55dd58b0 - Merge pull request timvideos#80 from xobs/fix-vexriscv-csr-read <enjoy-digital> |\ | * 41a9e7d9 - vexriscv_debug: use csr read()/write() accessors <Sean Cross> * | 7ecdcaca - soc/integration/sdram_init: use fixed burst_length for each memtype (even in 1:2, use BL8 for DDR3 since BL4 is not efficient) <Florent Kermarrec> * | a4caa896 - targets/nexys_video: remove read leveling constants (now automatic) <Florent Kermarrec> * | d8250041 - targets/nexys4ddr: s7ddrphy now supports ddr2, working <Florent Kermarrec> * | 4f1274e6 - bios/sdram: improve bitslip selection when window can't be optimal (not enough taps for a full window) <Florent Kermarrec> * | 7dbd85a8 - soc/cores/uart: rename UARTMultiplexer to RS232PHYMultiplexer. UARTMultiplexer now acts on serial signals (tx/rx) <Florent Kermarrec> * | ef1c7784 - soc_core: add csr_expose parameter to be able to expose csr bus (useful when design is integrated in another) <Florent Kermarrec> |/ * f9104b20 - bios/sdram: improve read leveling (artix7 read-leveling is now done automatically at startup) <Florent Kermarrec> * c84e189d - bios/sdram: fix compilation with no write leveling <Florent Kermarrec> * b062d4dd - Merge pull request timvideos#79 from xobs/fix-vexriscv-data-read <enjoy-digital> |\ | * be8eb5ff - vexriscv: debug: fix reading DATA register <Sean Cross> |/ * e35be26e - Merge pull request timvideos#78 from xobs/vexriscv_debug_bridge <enjoy-digital> |\ | * 6bc9265c - setup: add vexriscv_debug to list of entrypoints <Sean Cross> | * 45a649be - tools: vexriscv_debug: add debug bridge <Sean Cross> |/ * c821a0fe - cores/cpu/vexriscv: create variants: None and "debug", some cleanup <Florent Kermarrec> * 59fa7159 - core/cpu/vexriscv/core: improve indentation <Florent Kermarrec> * 6068f6ce - Merge pull request timvideos#77 from xobs/debug-vexriscv-enjoy <enjoy-digital> |\ | * 32d5a751 - soc_core: uart: add a reset line to the UART <Sean Cross> | * 1ef127e0 - soc: integration: use the new cpu_debugging flag for vexriscv <Sean Cross> | * e7c762c8 - soc: vexriscv: add cpu debug support <Sean Cross> | * 2024542a - vexriscv: verilog: pull debug-enabled verilog <Sean Cross> * | 11e84915 - platforms/arty_s7: keep up to date with Migen <Florent Kermarrec> * | d35dc5cd - platforms/arty: merge with Migen <Florent Kermarrec> |/ * fa021566 - platforms/kc705: keep up to date with Migen <Florent Kermarrec> * b9f3b49c - platforms/de0nano: keep up to date with Migen <Florent Kermarrec> * 1628c36a - README/boards: add precision on Migen's platforms <Florent Kermarrec> * df99cc66 - bios/sdram: also check for last read of scan to choose optimal window <Florent Kermarrec> * 8ce7fcb2 - bios/main: add cpu frequency to banner <Florent Kermarrec> * 477d2249 - bios/sdram: check for optimal read window before doing read leveling, increment bitslip if not optimal. <Florent Kermarrec> * 9e737d3c - soc/cores/code_8b10b: update (from misoc) <Florent Kermarrec> * d58eb4ec - bios/sdram: use new phy, improve scan, allow disabling high skew <Florent Kermarrec> * 692cb142 - software/bios: fix picorv32 boot_helper <Florent Kermarrec> * b5ee110e - bios/sdram: add write/read leveling scans <Florent Kermarrec> * 34b2bd0c - boards: add genesys2 (platform with clk/serial/dram/ethernet + target) <Florent Kermarrec> * 8edc659d - soc_core: remove assert on interrupt (added to catch design issues, but too restrictive for some usecases) <Florent Kermarrec> * 2c13b701 - soc/integration/cpu_interface: add shadow_base parameter <Florent Kermarrec> * 78639fa9 - Merge pull request timvideos#75 from xobs/bios-windows-build <enjoy-digital> |\ | * 74449929 - soc: bios: fix windows build <Sean Cross> |/ * 18f86881 - targets: change a7/k7ddrphy imports to s7ddrphy <Florent Kermarrec> * 3e723d15 - soc/cores/cpu: add add_sources static method <Florent Kermarrec> * c534250c - Merge pull request timvideos#72 from bunnie/fix_riscv_boothelper <enjoy-digital> |\ | * 7353197e - fix the vexriscv boot helper <bunnie> |/ * 5ab4282e - Merge pull request timvideos#71 from DeanoC/master <enjoy-digital> |\ | * 34a93034 - Fix for missing connectors for arty boards <Deano Calver> |/ * e7d1683e - litex_term: cleanup getkey and revert default settings on KeyboardInterrupt <Florent Kermarrec> * 06162b61 - README: add list of supported CPUs/Cores and add link to tutorials <Florent Kermarrec> * 6854c7f5 - soc/integration/cpu_interface: use riscv64 toolchain instead of riscv32 (prebuild toolchain for windows can be found at http://gnutoolchains.com/) <Florent Kermarrec> * 66229c8c - add VexRiscv support (imported/adapted from misoc) <Dolu1990> * f60da4a5 - add VexRiscv submodule <Florent Kermarrec> * d149f386 - allow multiple riscv32 softcores (use picorv32 cpu_type instead of riscv32) <Florent Kermarrec> * c3652935 - build: use our own fhdl/verilog code (needed to avoid combinatorial loop in simulation) <Florent Kermarrec> * 121eaba7 - soc/intergration/soc_core: don't delete uart/timer0 interrupts <Florent Kermarrec> * 39ffa532 - xilinx/programmer: fix programmer <Florent Kermarrec> * c001b8ea - build/xilinx/vivado: add vivado ip support <Florent Kermarrec> * 43f8c230 - soc_core: uncomment uart interrupt deletion <Florent Kermarrec> * d7c74746 - gen/sim: fix import to use litex simulator instead of migen simulator <Florent Kermarrec> * migen changed from 0.6.dev-99-g881741b to 0.6.dev-162-ga6082d5 * a6082d5 - added support for qm_xc6slx16_sdram <Daniel Kucera> * 2d37c78 - add indexed part select support <Robin Ole Heinemann> * 5fe1bfe - build/platforms: Add tinyfpga_a platform. (timvideos#111) <William D. Jones> * 307e752 - fhdl.specials: add reset_i argument to TSTriple. <whitequark> * 18274c3 - build.lattice: fix IcestormTristate override for 1-bit signals. <whitequark> * e07c1c5 - build.lattice: add IcestormTristate override. <whitequark> * 0509a7b - fhdl.verilog: make convert() idempotent. <whitequark> * 5dd4efa - genlib.fifo: add read() and write() methods, for simulation. <whitequark> * 4e4833d - sayma_amc: AMC_MASTER_AUX_CLK is in a 3.3V bank, needs LVDS_25, cannot use termination <Sebastien Bourdeauducq> * 47f4c59 - typo <Sebastien Bourdeauducq> * 870935d - sayma_amc: add AMC_MASTER_AUX_CLK <Sebastien Bourdeauducq> * bef9dea - platform: support recursive connector pins <Sebastien Bourdeauducq> * cb171af - platform: support adding connectors <Sebastien Bourdeauducq> * 26d77fe - xilinx/ise: Add Cygwin path to Windows conversion in xst files (timvideos#88) <William D. Jones> * 1ec3ea9 - sayma_rtm: add hmc7043_gpo <Sebastien Bourdeauducq> * b515b0e - platforms/arty_a7: merge with LiteX's platform, remove the FIXMEs <Florent Kermarrec> * 9d3db58 - Sayma AMC: add SYSCLK1_300 <Thomas Harty> * daf6f5d - sayma: add adc_sysref pins <Sebastien Bourdeauducq> * dcfec40 - sayma_amc: fix raw RTM GTH pair polarities <Sebastien Bourdeauducq> * 7823da4 - sayma_amc: add raw RTM GTH pairs <Sebastien Bourdeauducq> * df0ce4a - Update version in setup.py. <whitequark> * e4e92dc - Fixed case of xadc to match kc705. <Caleb Jamison> * 84186ca - Changed ck_io to name pins, add xadc. <Caleb Jamison> * c2480c9 - Removed _ from spiflash_4x <Caleb Jamison> * fd7ce92 - Moved pmods to _connectors, removed _1x from spiflash <Caleb Jamison> * 2896306 - Changed spiflash_1x to spiflash in _io list. <Caleb Jamison> * ede1c9e - Add _connectors to constructor <Caleb Jamison> * 20d28d4 - Removed extra field from _connector list <Caleb Jamison> * 02e80df - Add chipkit io to _connector list <Caleb Jamison> * 1eeb38d - Fixed missing parens, extra spaces <Caleb Jamison> * 0dd85cd - Split pmods to _connectors, checked against litex <Caleb Jamison> * 04a9914 - Arty A7 platform <Caleb Jamison> * 07c46f5 - Support for AFC 3v1 <Mikołaj Sowiński> * 9929b23 - sayma_amc: fix 19e82b7 syntax <Robert Jördens> * 19e82b7 - sayma_amc: diff term lvds inputs <Robert Jördens> * a51a5f6 - sayma: use LVCMOS18 for serwb <Sebastien Bourdeauducq> * 34a3c62 - sayma_rtm: LVDS_18 is called LVDS <Sebastien Bourdeauducq> * e5cabe1 - sayma_rtm: fix I/O bank voltages <Sebastien Bourdeauducq> * 5947224 - sayma_rtm: add ref_lo_clk_sel <Robert Jördens> * 4cb07f1 - bitcontainer: slices are unsigned <Robert Jördens> * ca28f4e - platforms/sayma_amc/serwb: use DIFF_TERM_ADV=TERM_100 <Florent Kermarrec> * 6425844 - revert genlib/cdc: add optional master parameter to ElasticBuffer to allow sharing write reset between ElasticBuffers <Florent Kermarrec> * 33bb06a - genlib/cdc: add optional master parameter to ElasticBuffer to allow sharing write reset between ElasticBuffers <Florent Kermarrec> * 48f2b92 - doc/fhdl: use correct syntax for code block. <whitequark> * e66f2df - Fix documentation link in README. <whitequark> * 2423404 - fhdl.verilog: fix nondeterminism in _printcomb. <whitequark> * 0aa76fa - build/platforms: Add Arty S7 platform. <William D. Jones> * 19ca7d8 - platforms/tinyfpga_b: Add default serial mapping. <William D. Jones> * cba5bea - sayma_amc/rtm: use DIFF_TERM=TRUE on serwb lvds inputs <Florent Kermarrec> * 9bc084a - Update .gitignore. <whitequark> * d46aa13 - fhdl.verilog: do not initialize combinatorial regs. <whitequark> * 02bccef - Fix breakage introduced in 2220222. <whitequark> * d667233 - LatticeIceStormToolchain: pass --no-promote-globals to arachne-pnr. <whitequark> * 2220222 - genlib.cdc.MultiReg: allow specifying reset value for registers. <whitequark> * 5c2c144 - sayma_rtm: enable OVERTEMPPOWERDOWN and use options from artiq <Robert Jordens> * 24d0e95 - samya_amc: enable OVERTEMPPOWERDOWN <Robert Jordens> * a32a0f7 - kasli: enable OVERTEMPPOWERDOWN <Robert Jordens> * 81d0be3 - DDROutputImplS7: make it SAME_EDGE and fix it <Robert Jordens> * 4039322 - kasli: mark negative polarity of mod_present on v1.1 <Sebastien Bourdeauducq> * b50e224 - Add DE0-Nano-SoC (aka Atlas-SoC) platform (timvideos#96) <Adam Greig> * c14a1e4 - Add MyStorm BlackIce I and II platforms (timvideos#95) <Adam Greig> * f4180e9 - vivado: print short timing info after phys_opt_design <Sebastien Bourdeauducq> * c65a2f3 - vivado: run phys_opt_design after routing <Sebastien Bourdeauducq> Full submodule status -- b2da1516df3cc2756bfe8d1fa06d7bf2562ba1f4 edid-decode (remotes/origin/HEAD) a628956da7dc794e6e3c95b31ff9ce3af58bc763 flash_proxies (remotes/origin/HEAD) 7a5ac75e2295dcf15f83df966244f30154a8f662 litedram (remotes/origin/HEAD) 24b0d2b8c2cfcf96a8c6cb56ec01af9a56952aad liteeth (remotes/origin/HEAD) a97a6910cbebfb4c068a178139df7b9a9c72168f litepcie (remotes/origin/HEAD) 002cd25e7fd2a60b4dcf1ce829731b9cf5c2f744 litesata (remotes/origin/HEAD) f26e36ef23170002af8ab1461ba39209e531b6cb litescope (remotes/origin/HEAD) e841c5646c17ecbf07642c69c16c6c7c45e55475 liteusb (remotes/origin/HEAD) 7b4240f9b3d6b7e69e5fe9dbaf50e117bd0ca704 litevideo (remotes/origin/HEAD) 7a14b75cd676e9328063abc1fcdc6fcd4fc6c5ef litex (v0.1-423-g7a14b75c) a6082d56ccc615229bd3b5205f5b7207c14dca01 migen (0.6.dev-162-ga6082d5)

* litedram changed from f51052f to 47a0d5f * 47a0d5f - litedram_gen/LiteDRAMUSDDRPHYCRG: remove AsyncResetSynchronizer on sys/sys4x (reset handled by USIDELAYCTRL). <Florent Kermarrec> * 02e67ec - Merge pull request timvideos#192 from antmicro/jboc/port-adaptation <enjoy-digital> |\ | * 22bd01c - frontend/wishbone: simplify by reusing LiteDRAMNativePortConverter <Jędrzej Boczar> | * b0bde29 - frontend/wishbone: fix wb2native missing wdata.ready when wb/port data widths differ <Jędrzej Boczar> | * 79314f9 - frontend/wishbone: fix wdata.valid being high with old data, use cmd.last=1 <Jędrzej Boczar> | * 000a352 - frontend/adaptation: delay sending write commands to prevent data loss during up-conversion <Jędrzej Boczar> | * 84fb7d3 - frontend/adaptation: refactor up-converter logic to use FSM for clarity <Jędrzej Boczar> | * efe9a44 - frontend/adaptation: clean up LiteDRAMNativePortUpConverter code <Jędrzej Boczar> | * 2f35e97 - frontend/adaptation: fix error when read follows write to the same address <Jędrzej Boczar> | * 1587ee3 - frontend/adaptation: use port.cmd.last instead of port.flush in up-converter <Jędrzej Boczar> | * 35fa91c - test/crossbar: up-conversion with mode="both" should be working now <Jędrzej Boczar> | * 9b90a56 - frontend/adaptation: combine read/write port up-converters and extend tests <Jędrzej Boczar> | * 762cd6d - test/adaptation: add port converter tests with mode="both" <Jędrzej Boczar> | * 7a0f7a7 - test/common: fix error in test data <Jędrzej Boczar> | * 1cc9656 - test/crossbar: improve NativePortDriver to use separate generatos on data paths <Jędrzej Boczar> | * 025e280 - test/crossbar: fix test that was not being run <Jędrzej Boczar> * 71b991e - Merge pull request timvideos#210 from oskirby/ddr3-tdqs-mode <enjoy-digital> |\ | * 805a374 - Add support for TDQS mode. <Owen Kirby> |/ * c01e868 - phy/gensdrphy/HalfRateGENSDRPHY: review/simplify and reduce read_latency by 1. <Florent Kermarrec> * litescope changed from 15179cb to a80c964 * a80c964 - Merge pull request timvideos#22 from antmicro/jboc/test-script <enjoy-digital> * 8b0274d - examples: add a more general script for testing <Jędrzej Boczar> * litex changed from 7bf191ca to abc49964 * abc49964 - tools/litex_json2dts: add missing copyrights. <Florent Kermarrec> * aed0dcee - setup: add litex_json2dts to console_scripts. <Florent Kermarrec> * b64209b3 - Merge pull request timvideos#620 from antmicro/add_litex_json2dts <enjoy-digital> |\ | * fafa844a - json2dts: Add Linux DT generation script <Mateusz Holenko> * 0ca99b79 - build/sim/config: add default_clk/default_clk_freq parameters for retro-compatibility with previous API. <Florent Kermarrec> * 696ea468 - build/sim: use json_object_get_int64 instead of json_object_get_uint64. <Florent Kermarrec> * 382c1a3a - Merge pull request timvideos#619 from antmicro/jboc/sim-clocker <enjoy-digital> * f778ff09 - build/sim: improve timebase calculation (strict checks) and update modules <Jędrzej Boczar> * c1ae7e59 - build/sim: allow for arbitrary clocks generation using clockers <Jędrzej Boczar> * 38054874 - build/sim: use a real timebase in the simulation <Jędrzej Boczar> * litex-boards changed from 2ce24df to ee28d7b * ee28d7b - targets/ulx3s/add_oled: simplify. <Florent Kermarrec> * 623faa9 - Merge pull request timvideos#96 from pepijndevos/oled <enjoy-digital> |\ | * eba7037 - add optional OLED peripheral to ULX3S target <Pepijn de Vos> |/ * 929e55d - platforms/trellisboard: add SDCard PMOD pins. <Florent Kermarrec> * 5fd3e8d - ecpix5: add SDCard. <Florent Kermarrec> * f058181 - README: fix typo. <Florent Kermarrec> * 94ccf1d - targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug). <Florent Kermarrec> * ecdc1ef - README: add missings . <Florent Kermarrec> * 361afa7 - README: add links to LiteX's wiki. <Florent Kermarrec> * 02c0c0a - README: add board picture and fix a few typos. <Florent Kermarrec> * eb8a484 - targets/de10nano: fix typo. <Florent Kermarrec> * 2cef54a - targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required). <Florent Kermarrec> * bfbee48 - Readme/boards: fill most of the missing infos. <Florent Kermarrec> * bb65692 - add LICENSE. <Florent Kermarrec> * e9706d4 - README: add initial contents and list of supported boards. <Florent Kermarrec> * 760b8ff - arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard. <Florent Kermarrec> * 04fc98f - de0nano/ulx3s: add sdram HalfRate support (untested). <Florent Kermarrec> * d0ca1be - targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate. <Florent Kermarrec> * 9730c6f - platforms/de10nano: use additional sdram constraints required for HalfRate. <Florent Kermarrec> * 7399d13 - paltforms/de10nano/sdram: enable fast input/output on dq. <Florent Kermarrec> * b4b1ab8 - paltforms/de10nano: simplify IO constraints (for consistency with others platforms). <Florent Kermarrec> * 89c5bf4 - Merge pull request timvideos#92 from rob-ng15/master <enjoy-digital> |\ | * 7cda143 - Allow use of HalfRateGENSDRPHY <rob-ng15> | * cf98393 - Add Misc <rob-ng15> * | 1e1589a - zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000). <Florent Kermarrec> * | 8a3b453 - add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB. <Florent Kermarrec> |/ * e723bef - platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope). <Florent Kermarrec> * 19d0b95 - platforms/targets: keep in sync with litex. <Florent Kermarrec> * 0ee4b21 - trellisboard/ulx3s: fix sdcard slewrate. <Florent Kermarrec> * 7efa1c3 - platforms/arty: add missing pullups on sdcard. <Florent Kermarrec> * litex-devicetree changed from 4216376 to 81d837b Full submodule status -- 2942d0652a89646c5225bee15dd55cc3b0871766 VexRiscv (1.0.1-417-g2942d06) 3a6108a75be356a3dc53760d22782f1323248b6b edid-decode (heads/master) 3a06aa84b62ad24467fb0d2c6ceddf565e9ea447 flash_proxies (heads/master) 47a0d5fb9e552baa880afab57903a5966d1ee8a7 litedram (2020.04-88-g47a0d5f) 792013a1756ea50608726ee86989ec38cfc35a8b liteeth (2020.04-21-g792013a) 6fdd02058fba29008c90b162e0ef707dce15ebeb liteiclink (2020.04) 0b6a4bb6e742fd4de38d7ca3674f91acc5985b35 litepcie (2020.04-56-g0b6a4bb) b36d3a33fbbfcffdb77a7a9e05bc8121387858d3 litesata (2020.04-1-gb36d3a3) a80c9640757b61533f300f29628aec3b7316aca8 litescope (2020.04-4-ga80c964) 7457a29b1a47fe15e81fa37f3bbdd510788f1d53 liteusb (heads/master) 41f30143075ece3fff5c33a332ed067d1837cbb3 litevideo (2020.04) abc49964ea6719866684b474e10167950b85854e litex (2020.04-574-gabc49964) ee28d7b5ec1e0bcbeacc342c82cf539a135fbeb3 litex-boards (2020.04-162-gee28d7b) 81d837bc6897d083a6e1166269c186cd196e5cc7 litex-devicetree (heads/master) f1792587a9b50732578e0166cb5d1d83b126cfa6 litex-renode (remotes/origin/HEAD) 7bc4eb1387b39159a74c1dbd1b820728e0bfbbaa migen (0.6.dev-354-g7bc4eb1) 8f5a253b22cd4ebcd56304a3662f4c70e3b34ed5 nmigen (v0.1-69-g8f5a253) 48333804e40c7c9c1c8d5b2e70ba75f4b646d8f0 pythondata-cpu-lm32 (2020.04-5-g4833380) 4731142284cf87e89b21fb35ceff1139f2f89227 pythondata-cpu-minerva (heads/master) af561171f5fc8c684537897f12ef0f429e38624b pythondata-cpu-mor1kx (2020.04-5-gaf56117) 88974894c800ee2e827db47865e0611a07ff40d7 pythondata-cpu-picorv32 (2020.04-5-g8897489) 654057b2f5cec0f9fc99487dff67861f76fcbe7e pythondata-cpu-vexriscv (2020.04-7-g654057b) 7cfcaed2e726027fd622650b58dd77e47c495ee0 pythondata-software-compiler_rt (2020.04-5-g7cfcaed2)

* litedram changed from f51052f to 47a0d5f * 47a0d5f - litedram_gen/LiteDRAMUSDDRPHYCRG: remove AsyncResetSynchronizer on sys/sys4x (reset handled by USIDELAYCTRL). <Florent Kermarrec> * 02e67ec - Merge pull request timvideos#192 from antmicro/jboc/port-adaptation <enjoy-digital> |\ | * 22bd01c - frontend/wishbone: simplify by reusing LiteDRAMNativePortConverter <Jędrzej Boczar> | * b0bde29 - frontend/wishbone: fix wb2native missing wdata.ready when wb/port data widths differ <Jędrzej Boczar> | * 79314f9 - frontend/wishbone: fix wdata.valid being high with old data, use cmd.last=1 <Jędrzej Boczar> | * 000a352 - frontend/adaptation: delay sending write commands to prevent data loss during up-conversion <Jędrzej Boczar> | * 84fb7d3 - frontend/adaptation: refactor up-converter logic to use FSM for clarity <Jędrzej Boczar> | * efe9a44 - frontend/adaptation: clean up LiteDRAMNativePortUpConverter code <Jędrzej Boczar> | * 2f35e97 - frontend/adaptation: fix error when read follows write to the same address <Jędrzej Boczar> | * 1587ee3 - frontend/adaptation: use port.cmd.last instead of port.flush in up-converter <Jędrzej Boczar> | * 35fa91c - test/crossbar: up-conversion with mode="both" should be working now <Jędrzej Boczar> | * 9b90a56 - frontend/adaptation: combine read/write port up-converters and extend tests <Jędrzej Boczar> | * 762cd6d - test/adaptation: add port converter tests with mode="both" <Jędrzej Boczar> | * 7a0f7a7 - test/common: fix error in test data <Jędrzej Boczar> | * 1cc9656 - test/crossbar: improve NativePortDriver to use separate generatos on data paths <Jędrzej Boczar> | * 025e280 - test/crossbar: fix test that was not being run <Jędrzej Boczar> * 71b991e - Merge pull request timvideos#210 from oskirby/ddr3-tdqs-mode <enjoy-digital> |\ | * 805a374 - Add support for TDQS mode. <Owen Kirby> |/ * c01e868 - phy/gensdrphy/HalfRateGENSDRPHY: review/simplify and reduce read_latency by 1. <Florent Kermarrec> * litepcie changed from 0b6a4bb to 30456fc * 30456fc - litepcie_gen: add csr_ordering support. <Florent Kermarrec> * litescope changed from 15179cb to a80c964 * a80c964 - Merge pull request timvideos#22 from antmicro/jboc/test-script <enjoy-digital> * 8b0274d - examples: add a more general script for testing <Jędrzej Boczar> * litex changed from 9fc488bd to 00629c45 * 00629c45 - interconnect/csr: add CSR registers ordering support. <Florent Kermarrec> * ee7a7f46 - soc/interconnect/csr: improve ident. <Florent Kermarrec> * b1008b01 - integration/soc: add expection on decoder when full address space is mapped. <Florent Kermarrec> * b831dc8c - wishbone: revert default adr_width to 30. <Florent Kermarrec> * abc49964 - tools/litex_json2dts: add missing copyrights. <Florent Kermarrec> * aed0dcee - setup: add litex_json2dts to console_scripts. <Florent Kermarrec> * b64209b3 - Merge pull request timvideos#620 from antmicro/add_litex_json2dts <enjoy-digital> |\ | * fafa844a - json2dts: Add Linux DT generation script <Mateusz Holenko> * | 0ca99b79 - build/sim/config: add default_clk/default_clk_freq parameters for retro-compatibility with previous API. <Florent Kermarrec> * | 696ea468 - build/sim: use json_object_get_int64 instead of json_object_get_uint64. <Florent Kermarrec> * | 382c1a3a - Merge pull request timvideos#619 from antmicro/jboc/sim-clocker <enjoy-digital> |\ \ | |/ |/| | * f778ff09 - build/sim: improve timebase calculation (strict checks) and update modules <Jędrzej Boczar> | * c1ae7e59 - build/sim: allow for arbitrary clocks generation using clockers <Jędrzej Boczar> | * 38054874 - build/sim: use a real timebase in the simulation <Jędrzej Boczar> * | e0f131a3 - cores/uart: add txempty/rxfull CSRs. <Florent Kermarrec> * | 2a3e39b1 - tools/litex_server: enable read_merger with CommUDP. <Florent Kermarrec> * | a5d0a340 - test: specify wishbone adr_width on AXI(Lite)<-->Wishbone tests and remove debug traces. <Florent Kermarrec> * | eb3374d0 - Merge pull request timvideos#617 from gsomlo/gls_rocket_dma <enjoy-digital> |\ \ | * | 561331ed - debug: make CI print offending values <Gabriel Somlo> | * | df3428be - liblitesdcard/sdcard: (temporarily) slow down SDCARD_CLK_FREQ to 25MHz <Gabriel Somlo> | * | 2d9dc8f9 - cores/cpu/rocket: expose slave port for DMA <Gabriel Somlo> | * | d8161e5a - integration/soc: make DMA slave region cover (at least) the lower 4GB <Gabriel Somlo> | * | 70eae5cb - interconnect/wishbone: increase WB address width to 31 <Gabriel Somlo> | * | b8c9da81 - soc/interconnect/axi: add Wishbone2AXI converter <Gabriel Somlo> |/ / * | 2ec4604c - cores/gpio: add support for Record on GPIOOut, GPIOIn and GPIOInOut. <Florent Kermarrec> * | 5e53e5d7 - Merge pull request timvideos#615 from pepijndevos/openfpgaloader <enjoy-digital> |\ \ | * | 79ca4d96 - remove debugging <Pepijn de Vos> | * | f6e20700 - add openFPGAloader programmer <Pepijn de Vos> * | | eab0726c - cpu/vexriscv/core: use variant name as human_name. <Florent Kermarrec> * | | e0a763e5 - cpu/vexriscv/system.h: provide empty flush_cpu_i/dcache functions for variants with no i/d cache. <Florent Kermarrec> * | | 3ff1bcaf - cpu/zynq7000: set csr map to 0x00000000. <Florent Kermarrec> * | | c0253e3f - Merge pull request timvideos#611 from antmicro/jboc/axi-lite <enjoy-digital> |\ \ \ | | |/ | |/| | * | e78d950a - soc/interconnect/axi: add AXILite -> AXI converter <Jędrzej Boczar> * | | cc844054 - tools/litex_server/read_merger: review/simplify a bit. <Florent Kermarrec> * | | 4f382ccf - Merge pull request timvideos#605 from cklarhorst/feature-uart-read-merger <enjoy-digital> |\ \ \ | * | | 2034c563 - Merge sequential reads for the UART litex_server backend <Christian Klarhorst> * | | | a942e358 - cpu/blackparrot: minor cleanups, add sim variant (since use different flist). <Florent Kermarrec> * | | | 86e910df - Merge pull request timvideos#610 from Dolu1990/vexriscv_smp <enjoy-digital> |\ \ \ \ | * | | | 023ab15e - soc/cores/cpu/vexriscv_smp enable dynamic litedram datawidth <Dolu1990> | * | | | e5cd5d54 - Merge branch 'master' into vexriscv_smp <Dolu1990> | |\ \ \ \ | |/ / / / |/| | | | * | | | | 1938ce36 - integration/soc/add_sdram: allow the CPU to add the direct memory buses when adding the sdram. <Florent Kermarrec> * | | | | 6576416b - cores/cpu/rocket: add use_memory_bus parameter to easily disable direct memory bus for testing. <Florent Kermarrec> | * | | | 789a70e7 - Merge branch 'master' into vexriscv_smp <Dolu1990> | |\ \ \ \ | |/ / / / |/| | | | * | | | | 0696b409 - CHANGES: update. <Florent Kermarrec> * | | | | fe38e12b - cpu/vexriscv_smp: move litedram import, remove os.path import. <Florent Kermarrec> * | | | | 59b95fad - litex_setup: fix vexriscv-smp repository. <Florent Kermarrec> * | | | | 9d052f38 - Merge pull request timvideos#607 from Dolu1990/vexriscv_smp <enjoy-digital> |\ \ \ \ \ | | * | | | d284dfbe - soc/cores/cpu/vexriscv_smp config update <Dolu1990> | |/ / / / | * / / / aa57c7a2 - soc/cores/cpu/vexriscv_smp integration <Dolu1990> |/ / / / * | | | f87513ab - liblitesdcard/sdcard: increase SDCARD_CLK_FREQ to 50MHz. <Florent Kermarrec> * | | | 9518ccf4 - integration/soc/etherbone: expose ethcore (useful to combine udp/etherbone). <Florent Kermarrec> | |_|/ |/| | * | | 9e07623b - integration/soc: fix dma_bus typo. <Florent Kermarrec> |/ / * / 1fdffdfd - targets: keep in sync with litex-boards. <Florent Kermarrec> |/ * 8a0684b1 - Merge pull request timvideos#604 from antmicro/jboc/axi-lite <enjoy-digital> |\ | * 879e6ffe - soc/interconnect/axi: add basic AXI Lite up-converter <Jędrzej Boczar> | * 32160e61 - soc/interconnect/axi: separate AXI Lite converter channels <Jędrzej Boczar> * | ed721198 - Merge pull request timvideos#603 from enjoy-digital/socdoc-extensions <Sean Cross> |\ \ | * | 29b2baf9 - doc: socdoc: document new `sphinx_extra_config` parameter <Sean Cross> | * | dd366467 - litex: add `sphinx_extra_config` to `generate_docs()` <Sean Cross> * | | 3d16838d - Merge pull request timvideos#602 from enjoy-digital/socdoc-extensions <enjoy-digital> |\| | | * | 7fecfbf8 - doc: socdoc: document `sphinx_extensions` parameter <Sean Cross> |/ / * | 83370399 - CHANGES: update. <Florent Kermarrec> * | 041c7527 - core/cpu: integrate Zynq as a classical CPU (Zynq7000), deprecate SoCZynq. <Florent Kermarrec> |/ * 8bdf6941 - liblitesdcard/sdcard: use max divider of 256 (128 was not enough for the initial 400Khz clock frequency). <Florent Kermarrec> * 8f92034d - CHANGES: update. <Florent Kermarrec> * 99e88dfc - Merge pull request timvideos#600 from antmicro/jboc/axi-lite <enjoy-digital> |\ | * a9d8b813 - test/axi: move all AXI Lite tests to separate file <Jędrzej Boczar> | * 367eb122 - soc/integration: use AXILiteSRAM when using bus_standard="axi-lite" <Jędrzej Boczar> | * 8ae501c3 - test/axi: add crossbar stress tests <Jędrzej Boczar> | * 706bc25d - soc/integration: add bus standard parser arguments <Jędrzej Boczar> | * 32d9e212 - soc/interconnect/axi: improve Timeout module and test it with shared interconnect <Jędrzej Boczar> | * 2cab7fbf - test/axi: add shared AXI Lite interconnect tests <Jędrzej Boczar> | * 3a08b21d - soc/interconnect/axi: implement AXI Lite decoder <Jędrzej Boczar> | * 214cfdca - soc/interconnect/axi: lock AXILiteArbiter until all requests have been responded to <Jędrzej Boczar> | * baf23c9c - test/test_axi: add AXI Lite interconnect arbiter tests <Jędrzej Boczar> | * a8a583d6 - socinterconnect/axi: interconnect shared sketch <Jędrzej Boczar> | * f47ccdae - soc/interconnect/axi: point-to-point interconnect and timeout module with tests <Jędrzej Boczar> | * b4c1120e - soc/integration: choose interconnect based on bus standard <Jędrzej Boczar> | * 69d8dd78 - soc/integration: add axi-lite standard to SoCBusHandler <Jędrzej Boczar> * | d38048ba - soc: add initial DMA bus support (optionally provided by CPU(s) for cache coherency). <Florent Kermarrec> |/ * 2361abb1 - Merge pull request timvideos#599 from antmicro/gen-mmcm-pr <enjoy-digital> |\ | * 66c5f371 - litex-gen: add mmcm core <Piotr Binkowski> * 6b72f52c - boards: keep in sync with litex-boards. <Florent Kermarrec> * 1f27b740 - soc/integration/add_sdcard: add direct connection to VexRiscv's dmabus for testing. <Florent Kermarrec> * 408d1a9f - cpu/vexriscv/system.h: update flush_cpu_dcache. <Florent Kermarrec> * 47ce15b4 - interconnect/wishbone: add minimal UpConverter. <Florent Kermarrec> * litex-boards changed from 2ce24df to ee28d7b * ee28d7b - targets/ulx3s/add_oled: simplify. <Florent Kermarrec> * 623faa9 - Merge pull request timvideos#96 from pepijndevos/oled <enjoy-digital> |\ | * eba7037 - add optional OLED peripheral to ULX3S target <Pepijn de Vos> |/ * 929e55d - platforms/trellisboard: add SDCard PMOD pins. <Florent Kermarrec> * 5fd3e8d - ecpix5: add SDCard. <Florent Kermarrec> * f058181 - README: fix typo. <Florent Kermarrec> * 94ccf1d - targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug). <Florent Kermarrec> * ecdc1ef - README: add missings . <Florent Kermarrec> * 361afa7 - README: add links to LiteX's wiki. <Florent Kermarrec> * 02c0c0a - README: add board picture and fix a few typos. <Florent Kermarrec> * eb8a484 - targets/de10nano: fix typo. <Florent Kermarrec> * 2cef54a - targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required). <Florent Kermarrec> * bfbee48 - Readme/boards: fill most of the missing infos. <Florent Kermarrec> * bb65692 - add LICENSE. <Florent Kermarrec> * e9706d4 - README: add initial contents and list of supported boards. <Florent Kermarrec> * 760b8ff - arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard. <Florent Kermarrec> * 04fc98f - de0nano/ulx3s: add sdram HalfRate support (untested). <Florent Kermarrec> * d0ca1be - targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate. <Florent Kermarrec> * 9730c6f - platforms/de10nano: use additional sdram constraints required for HalfRate. <Florent Kermarrec> * 7399d13 - paltforms/de10nano/sdram: enable fast input/output on dq. <Florent Kermarrec> * b4b1ab8 - paltforms/de10nano: simplify IO constraints (for consistency with others platforms). <Florent Kermarrec> * 89c5bf4 - Merge pull request timvideos#92 from rob-ng15/master <enjoy-digital> |\ | * 7cda143 - Allow use of HalfRateGENSDRPHY <rob-ng15> | * cf98393 - Add Misc <rob-ng15> * | 1e1589a - zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000). <Florent Kermarrec> * | 8a3b453 - add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB. <Florent Kermarrec> |/ * e723bef - platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope). <Florent Kermarrec> * 19d0b95 - platforms/targets: keep in sync with litex. <Florent Kermarrec> * 0ee4b21 - trellisboard/ulx3s: fix sdcard slewrate. <Florent Kermarrec> * 7efa1c3 - platforms/arty: add missing pullups on sdcard. <Florent Kermarrec> Full submodule status -- 2942d0652a89646c5225bee15dd55cc3b0871766 VexRiscv (1.0.1-417-g2942d06) 3a6108a75be356a3dc53760d22782f1323248b6b edid-decode (heads/master) 3a06aa84b62ad24467fb0d2c6ceddf565e9ea447 flash_proxies (heads/master) 47a0d5fb9e552baa880afab57903a5966d1ee8a7 litedram (2020.04-88-g47a0d5f) 792013a1756ea50608726ee86989ec38cfc35a8b liteeth (2020.04-21-g792013a) 6fdd02058fba29008c90b162e0ef707dce15ebeb liteiclink (2020.04) 30456fcb0697ef6c9252b9f2c0b2edf0c45ea353 litepcie (2020.04-57-g30456fc) b36d3a33fbbfcffdb77a7a9e05bc8121387858d3 litesata (2020.04-1-gb36d3a3) a80c9640757b61533f300f29628aec3b7316aca8 litescope (2020.04-4-ga80c964) 7457a29b1a47fe15e81fa37f3bbdd510788f1d53 liteusb (heads/master) 41f30143075ece3fff5c33a332ed067d1837cbb3 litevideo (2020.04) 00629c45b0ecb44149893439d040d4b4267ba4ea litex (2020.04-578-g00629c45) ee28d7b5ec1e0bcbeacc342c82cf539a135fbeb3 litex-boards (2020.04-162-gee28d7b) f1792587a9b50732578e0166cb5d1d83b126cfa6 litex-renode (remotes/origin/HEAD) 7bc4eb1387b39159a74c1dbd1b820728e0bfbbaa migen (0.6.dev-354-g7bc4eb1) 8f5a253b22cd4ebcd56304a3662f4c70e3b34ed5 nmigen (v0.1-69-g8f5a253) 48333804e40c7c9c1c8d5b2e70ba75f4b646d8f0 pythondata-cpu-lm32 (2020.04-5-g4833380) 4731142284cf87e89b21fb35ceff1139f2f89227 pythondata-cpu-minerva (heads/master) af561171f5fc8c684537897f12ef0f429e38624b pythondata-cpu-mor1kx (2020.04-5-gaf56117) 88974894c800ee2e827db47865e0611a07ff40d7 pythondata-cpu-picorv32 (2020.04-5-g8897489) 654057b2f5cec0f9fc99487dff67861f76fcbe7e pythondata-cpu-vexriscv (2020.04-7-g654057b) 7cfcaed2e726027fd622650b58dd77e47c495ee0 pythondata-software-compiler_rt (2020.04-5-g7cfcaed2)

@mtdudek

* litedram changed from f51052f to 2020.08-3-g5c69da5 * 5c69da5 - bench: add initial kcu105 bench target. <Florent Kermarrec> * 9995c0f - bench: switch integrated_rom to "rw" mode and reload it over Etherbone at startup. <Florent Kermarrec> * ac825e5 - add SPDX License identifier to header and specify file is part of LiteDRAM. <Florent Kermarrec> * 198bcba - test/reference: update. <Florent Kermarrec> * e3b86fe - getting started: update. <Florent Kermarrec> * a0a886e - litedram/init: export xdr ratio and databits. <Florent Kermarrec> * 94241d0 - bench: use new platform.request_all on LedChaser. <Florent Kermarrec> * 7420597 - bench: add genesys2 bench. <Florent Kermarrec> * 37fb44f - add bench directory with a first bench on arty board. <Florent Kermarrec> * 4e62d28 - examples/.yml: set cmd_latency to 1 on Kintex7/Ultrascale (values valided in LiteX-Boards). <Florent Kermarrec> * 07bf34d - frontend/wishbone: revert non-FSM version, the FSM one does not seem to cover all cases. <Florent Kermarrec> * 9c5ce52 - common: add connect method to LiteDRAMNativePort and use it in adapter for identify converter. <Florent Kermarrec> * 06f7192 - frontend/adapter/LiteDRAMNativePortConverter: simplify using ratio. <Florent Kermarrec> * a3dfc1d - frontend/adapter: minor cleanups. <Florent Kermarrec> * deac4c8 - frontend/adapter: simplify LiteDRAMNativePortDownConverter. <Florent Kermarrec> * ce4e7f9 - frontend/adapter: simplify LiteDRAMNativePortCDC using stream.ClockDomainCrossing. <Florent Kermarrec> * 16fd46b - frontend: rename adaptation to adapter. <Florent Kermarrec> * 4970c8a - frontend/wishbone: simplify/review and get FSM back (ease comprehension). <Florent Kermarrec> * 47a0d5f - litedram_gen/LiteDRAMUSDDRPHYCRG: remove AsyncResetSynchronizer on sys/sys4x (reset handled by USIDELAYCTRL). <Florent Kermarrec> * 02e67ec - Merge pull request timvideos#192 from antmicro/jboc/port-adaptation <enjoy-digital> |\ | * 22bd01c - frontend/wishbone: simplify by reusing LiteDRAMNativePortConverter <Jędrzej Boczar> | * b0bde29 - frontend/wishbone: fix wb2native missing wdata.ready when wb/port data widths differ <Jędrzej Boczar> | * 79314f9 - frontend/wishbone: fix wdata.valid being high with old data, use cmd.last=1 <Jędrzej Boczar> | * 000a352 - frontend/adaptation: delay sending write commands to prevent data loss during up-conversion <Jędrzej Boczar> | * 84fb7d3 - frontend/adaptation: refactor up-converter logic to use FSM for clarity <Jędrzej Boczar> | * efe9a44 - frontend/adaptation: clean up LiteDRAMNativePortUpConverter code <Jędrzej Boczar> | * 2f35e97 - frontend/adaptation: fix error when read follows write to the same address <Jędrzej Boczar> | * 1587ee3 - frontend/adaptation: use port.cmd.last instead of port.flush in up-converter <Jędrzej Boczar> | * 35fa91c - test/crossbar: up-conversion with mode="both" should be working now <Jędrzej Boczar> | * 9b90a56 - frontend/adaptation: combine read/write port up-converters and extend tests <Jędrzej Boczar> | * 762cd6d - test/adaptation: add port converter tests with mode="both" <Jędrzej Boczar> | * 7a0f7a7 - test/common: fix error in test data <Jędrzej Boczar> | * 1cc9656 - test/crossbar: improve NativePortDriver to use separate generatos on data paths <Jędrzej Boczar> | * 025e280 - test/crossbar: fix test that was not being run <Jędrzej Boczar> * 71b991e - Merge pull request timvideos#210 from oskirby/ddr3-tdqs-mode <enjoy-digital> |\ | * 805a374 - Add support for TDQS mode. <Owen Kirby> |/ * c01e868 - phy/gensdrphy/HalfRateGENSDRPHY: review/simplify and reduce read_latency by 1. <Florent Kermarrec> * liteeth changed from 792013a to 54acf9f * 54acf9f - phy/pcs_1000basex: keep up to date with MiSoC (adds SGMII and 10/100Mbps support). <Florent Kermarrec> * 64b85e6 - add SPDX License identifier to header and specify file is part or LiteEth. <Florent Kermarrec> * f275af8 - liteeth_gen: get Wishbone Platform's IOs with Interface.get_ios. <Florent Kermarrec> * 0705b35 - Merge pull request timvideos#46 from Xiretza/gen-py-wishbone <enjoy-digital> * 6a9a513 - Update gen.py to work with latest LiteX in wishbone mode <Xiretza> * liteiclink changed from 6fdd020 to 2020.08-1-gefd200f * efd200f - add SPDX License identifier to header and specify file is part of LiteICLink. <Florent Kermarrec> * 60b1994 - getting started: update. <Florent Kermarrec> * litepcie changed from 0b6a4bb to 2020.08-1-g0718fd1 * 0718fd1 - add SPDX License identifier to header and specify file is part of LitePCIe. <Florent Kermarrec> * 29d4963 - getting started: update. <Florent Kermarrec> * 30456fc - litepcie_gen: add csr_ordering support. <Florent Kermarrec> * litesata changed from b36d3a3 to 2020.08-1-gba006a7 * ba006a7 - add SPDX License identifier to header and specify file is part of LiteSATA. <Florent Kermarrec> * 2e4591c - getting started: update. <Florent Kermarrec> * litescope changed from 15179cb to 2020.08-2-g02b543e * 02b543e - litescope_cli: add capture subsampling support. <Florent Kermarrec> * 2739d5a - add SPDX License identifier to header and specify file is part of LiteScope. <Florent Kermarrec> * ec7bd6b - getting started: update. <Florent Kermarrec> * 7d22774 - Merge pull request timvideos#27 from cklarhorst/fix-storage-wrong-clock-domain <enjoy-digital> |\ | * ad4e46c - Fix: 2 signals in the storage class belong to the wrong clock domain <Christian Klarhorst> |/ * 2ad73a0 - Merge pull request timvideos#25 from cklarhorst/fix-trigger-flush-timer-wrong-clock-domain <enjoy-digital> |\ | * 16e6555 - Fix: A WaitTimer belongs to the wrong clock domain (trigger flush) <Christian Klarhorst> |/ * 0066866 - travis: install riscv toolchain for example. <Florent Kermarrec> * 6a322ed - test/test_examples: update. <Florent Kermarrec> * bc6c5e3 - examples: add mininal example on Arty with Etherbone and ibus/counter on analyzer. <Florent Kermarrec> * 0182377 - examples: remove obsolete examples rename litescope_test to litescope_cli and add it as console script. <Florent Kermarrec> * a80c964 - Merge pull request timvideos#22 from antmicro/jboc/test-script <enjoy-digital> * 8b0274d - examples: add a more general script for testing <Jędrzej Boczar> * litex changed from 9fc488bd to 3897acb9 * 3897acb9 - lattice/nx: update copyrights. <Florent Kermarrec> * 4364043b - integration/soc: expose integrated_rom_mode to allow ROM to be writable (useful for BIOS/ROM development where content is reloaded over UARTBone/Etherbone). <Florent Kermarrec> * 885c339d - soc/cores: add initial NX-LRAM support. <Piense> * cf13833e - cores/clock: add initial NX-OSCA support. <Piense> * e441bd60 - build/lattice: add initial Radiant support for NX FPGA family (Crosslink-NX/Certus-NX). <Piense> * 8a44464a - Merge pull request timvideos#640 from antmicro/mor1kx_dt <enjoy-digital> |\ | * 4dab1eb0 - litex_json2dts: Add support for mor1kx <Mateusz Holenko> * | 4f1c32ab - targets/de0nano: set sys2x_ps to 180° for sdram_rate=1:2. <Florent Kermarrec> * | d16051ff - boards/ulx3s: keep up to date with litex-boards. <Florent Kermarrec> * | d826c606 - soc/cores/clock/ECP5PLL: specificy CLKOS3_F/CPHASE and -1 on cphase to match Clarity Designer values. <Florent Kermarrec> * | 9e37b16e - soc/interconnect/axi/AXILite2CSR: add register parameter for genericity. <Florent Kermarrec> |/ * 42d8fc22 - Merge branch 'master' of https://github.com/enjoy-digital/litex <Florent Kermarrec> |\ | * ee0e2402 - Merge pull request timvideos#631 from gsomlo/gls-abc9-fixup <enjoy-digital> | |\ | | * c4710b37 - build/lattice/trellis: make "-abc9" an optional argument <Gabriel Somlo> * | | 77ae2433 - test: add SPDX License identifier to header and specify file is part of LiteX. <Florent Kermarrec> * | | b8371ef4 - tools: add SPDX License identifier to header and specify file is part of LiteX. <Florent Kermarrec> * | | 93d906f9 - soc: add SPDX License identifier and specify file is part of LiteX. <Florent Kermarrec> * | | e52ffd2d - gen: add specify SPDX License identifier and specify file is part of Migen and has been modified/adapted for LiteX. <Florent Kermarrec> * | | 70610b23 - build: add SPDX License identifier and specify file is part of LiteX. <Florent Kermarrec> * | | 6ee882d1 - platforms/targets: add SPDX License identifier to header and specify file is part of LiteX. <Florent Kermarrec> |/ / * | 9950e756 - build/io: fix InferedSDRIO (thanks @mtdudek). <Florent Kermarrec> * | bae871a8 - Merge pull request timvideos#632 from gsomlo/gls-sdcard-refactor <enjoy-digital> |\ \ | * | e0b2b815 - liblitesdcard/sdcard: read sdcard response only when needed <Gabriel Somlo> | * | a47b2de5 - sdcard: refactor command functions <Gabriel Somlo> | * | bfd6b3c3 - liblitesdcard/sdcard: cosmetic fixes (indentation, #ifdef, etc.) <Gabriel Somlo> | * | 37ebcd3b - factor out busy_wait_us() <Gabriel Somlo> | |/ * | 3206dba9 - Merge pull request timvideos#636 from Xiretza/minerva-cli-filetype <enjoy-digital> |\ \ | * | e3bb3a94 - Fix call to generation of minerva output file <Xiretza> | |/ * | 8bc5dd7c - Merge pull request timvideos#635 from Xiretza/collections-abc-deprecation <enjoy-digital> |\ \ | * | fcc7058b - Fix DeprecationWarning for collections.abc <Xiretza> | |/ * | 79844362 - Merge pull request timvideos#634 from betrusted-io/spi_opi_timing_only <enjoy-digital> |\ \ | |/ |/| | * d783e86f - add a pipe register to relax an async_default timing path <bunnie> * | 35929c0f - soc/integration/csr_bridge: use registered version only when SDRAM is present. <Florent Kermarrec> * | e4f5dd98 - interconnect/wishbone/Wishbone2CSR: add registered version and use it as default. <Florent Kermarrec> * | b344196a - build/lattice/diamond: use diamondc instead of pnmainc (avoid having to set environment variables). <Florent Kermarrec> * | f730f1d7 - cores/cpu/vexriscv_smp fix argument parsing <Dolu1990> * | 0e480dd6 - bios/main/sdram: fix speed reporting (Mbps/pin not MHz). <Florent Kermarrec> * | bb7f3343 - Merge pull request timvideos#627 from gsomlo/gls-dma-addr-64 <enjoy-digital> |\ \ | * | ba34c852 - cores/dma, liblitesdcard/sdcard: use 64 bits for dma base address <Gabriel Somlo> |/ / * | 4cf28a01 - software/bios: display SDRAM databits and freq. <Florent Kermarrec> * | 6f69679d - cpu/vexriscv_smp: more coherent_dma to __init__ instead of add_memory_buses. <Florent Kermarrec> * | b3531cd2 - cores/cpu: add external cpu_type. <Florent Kermarrec> * | b9d3aab5 - targets: use platform.request_all on LedChaser. <Florent Kermarrec> * | 14c91664 - build/generic_platform: add request_all method. <Florent Kermarrec> * | 57335b99 - cores/cpu/zynq7000: simplify using new loose parameter of Platform.request. <Florent Kermarrec> * | 4867f2b3 - Merge pull request timvideos#624 from trabucayre/emio_zynq <enjoy-digital> |\ \ | * | 87c26a30 - soc/cores/cpu/zynq7000: add enet0, enet0_mdio, sdio, sdio_cd and sdio_wp only when configured in EMIO mode <Gwenhael Goavec-Merou> * | | 48d63f23 - build/generic_plaform: add loose parameter to return None when not available/existing. <Florent Kermarrec> * | | 81df7b70 - Merge pull request timvideos#625 from scanakci/blackparrot_litex <enjoy-digital> |\ \ \ | * | | 2457859b - update BlackParrot transducer <sadullah> | * | | d2dabcef - Blackparrot human name update <sadullah> | |/ / * / / 188e6f57 - integration/soc/add_etherbone: pass phy to ethcore not self.ethphy. <Florent Kermarrec> |/ / * | d5062d1f - Merge pull request timvideos#623 from Dolu1990/vexriscv_smp <enjoy-digital> |\ \ | * | 07a8e696 - cpu/vexriscv_smp Add --with-coherent-dma <Dolu1990> |/ / * | 9a4c5aa1 - integration/soc/add_sdram: update rules to connect main bus to dram. <Florent Kermarrec> * | a1644510 - cpu/vexriscv_smp: fix args_read. <Florent Kermarrec> * | 896b68cd - cpu/vexriscv_smp: cleanup, fix coherent_dma connection. <Florent Kermarrec> * | 342f359e - Merge pull request timvideos#622 from antmicro/fix_connectors <enjoy-digital> |\ \ | * | de9ea19c - arty: Change USB-uart and I2S Pmod configuration <Pawel Sagan> * | | 3b293612 - soc/interconnect/axi: minor cleanups. <Florent Kermarrec> * | | 303d6cca - interconnect/stream: set default AsyncFIFO depth to None and add depth parameter to ClockDomainCrossing. <Florent Kermarrec> * | | 00629c45 - interconnect/csr: add CSR registers ordering support. <Florent Kermarrec> * | | ee7a7f46 - soc/interconnect/csr: improve ident. <Florent Kermarrec> * | | b1008b01 - integration/soc: add expection on decoder when full address space is mapped. <Florent Kermarrec> * | | b831dc8c - wishbone: revert default adr_width to 30. <Florent Kermarrec> | |/ |/| * | abc49964 - tools/litex_json2dts: add missing copyrights. <Florent Kermarrec> * | aed0dcee - setup: add litex_json2dts to console_scripts. <Florent Kermarrec> * | b64209b3 - Merge pull request timvideos#620 from antmicro/add_litex_json2dts <enjoy-digital> |\ \ | * | fafa844a - json2dts: Add Linux DT generation script <Mateusz Holenko> * | | 0ca99b79 - build/sim/config: add default_clk/default_clk_freq parameters for retro-compatibility with previous API. <Florent Kermarrec> * | | 696ea468 - build/sim: use json_object_get_int64 instead of json_object_get_uint64. <Florent Kermarrec> * | | 382c1a3a - Merge pull request timvideos#619 from antmicro/jboc/sim-clocker <enjoy-digital> |\ \ \ | |/ / |/| | | * | f778ff09 - build/sim: improve timebase calculation (strict checks) and update modules <Jędrzej Boczar> | * | c1ae7e59 - build/sim: allow for arbitrary clocks generation using clockers <Jędrzej Boczar> | * | 38054874 - build/sim: use a real timebase in the simulation <Jędrzej Boczar> * | | e0f131a3 - cores/uart: add txempty/rxfull CSRs. <Florent Kermarrec> * | | 2a3e39b1 - tools/litex_server: enable read_merger with CommUDP. <Florent Kermarrec> * | | a5d0a340 - test: specify wishbone adr_width on AXI(Lite)<-->Wishbone tests and remove debug traces. <Florent Kermarrec> * | | eb3374d0 - Merge pull request timvideos#617 from gsomlo/gls_rocket_dma <enjoy-digital> |\ \ \ | * | | 561331ed - debug: make CI print offending values <Gabriel Somlo> | * | | df3428be - liblitesdcard/sdcard: (temporarily) slow down SDCARD_CLK_FREQ to 25MHz <Gabriel Somlo> | * | | 2d9dc8f9 - cores/cpu/rocket: expose slave port for DMA <Gabriel Somlo> | * | | d8161e5a - integration/soc: make DMA slave region cover (at least) the lower 4GB <Gabriel Somlo> | * | | 70eae5cb - interconnect/wishbone: increase WB address width to 31 <Gabriel Somlo> | * | | b8c9da81 - soc/interconnect/axi: add Wishbone2AXI converter <Gabriel Somlo> |/ / / * | | 2ec4604c - cores/gpio: add support for Record on GPIOOut, GPIOIn and GPIOInOut. <Florent Kermarrec> * | | 5e53e5d7 - Merge pull request timvideos#615 from pepijndevos/openfpgaloader <enjoy-digital> |\ \ \ | * | | 79ca4d96 - remove debugging <Pepijn de Vos> | * | | f6e20700 - add openFPGAloader programmer <Pepijn de Vos> * | | | eab0726c - cpu/vexriscv/core: use variant name as human_name. <Florent Kermarrec> * | | | e0a763e5 - cpu/vexriscv/system.h: provide empty flush_cpu_i/dcache functions for variants with no i/d cache. <Florent Kermarrec> * | | | 3ff1bcaf - cpu/zynq7000: set csr map to 0x00000000. <Florent Kermarrec> * | | | c0253e3f - Merge pull request timvideos#611 from antmicro/jboc/axi-lite <enjoy-digital> |\ \ \ \ | | |/ / | |/| | | * | | e78d950a - soc/interconnect/axi: add AXILite -> AXI converter <Jędrzej Boczar> * | | | cc844054 - tools/litex_server/read_merger: review/simplify a bit. <Florent Kermarrec> * | | | 4f382ccf - Merge pull request timvideos#605 from cklarhorst/feature-uart-read-merger <enjoy-digital> |\ \ \ \ | * | | | 2034c563 - Merge sequential reads for the UART litex_server backend <Christian Klarhorst> * | | | | a942e358 - cpu/blackparrot: minor cleanups, add sim variant (since use different flist). <Florent Kermarrec> | |_|_|/ |/| | | * | | | 86e910df - Merge pull request timvideos#610 from Dolu1990/vexriscv_smp <enjoy-digital> |\ \ \ \ | * | | | 023ab15e - soc/cores/cpu/vexriscv_smp enable dynamic litedram datawidth <Dolu1990> | * | | | e5cd5d54 - Merge branch 'master' into vexriscv_smp <Dolu1990> | |\ \ \ \ | |/ / / / |/| | | | * | | | | 1938ce36 - integration/soc/add_sdram: allow the CPU to add the direct memory buses when adding the sdram. <Florent Kermarrec> * | | | | 6576416b - cores/cpu/rocket: add use_memory_bus parameter to easily disable direct memory bus for testing. <Florent Kermarrec> | * | | | 789a70e7 - Merge branch 'master' into vexriscv_smp <Dolu1990> | |\ \ \ \ | |/ / / / |/| | | | * | | | | 0696b409 - CHANGES: update. <Florent Kermarrec> * | | | | fe38e12b - cpu/vexriscv_smp: move litedram import, remove os.path import. <Florent Kermarrec> * | | | | 59b95fad - litex_setup: fix vexriscv-smp repository. <Florent Kermarrec> * | | | | 9d052f38 - Merge pull request timvideos#607 from Dolu1990/vexriscv_smp <enjoy-digital> |\ \ \ \ \ | | * | | | d284dfbe - soc/cores/cpu/vexriscv_smp config update <Dolu1990> | |/ / / / | * / / / aa57c7a2 - soc/cores/cpu/vexriscv_smp integration <Dolu1990> |/ / / / * | | | f87513ab - liblitesdcard/sdcard: increase SDCARD_CLK_FREQ to 50MHz. <Florent Kermarrec> * | | | 9518ccf4 - integration/soc/etherbone: expose ethcore (useful to combine udp/etherbone). <Florent Kermarrec> | |_|/ |/| | * | | 9e07623b - integration/soc: fix dma_bus typo. <Florent Kermarrec> |/ / * / 1fdffdfd - targets: keep in sync with litex-boards. <Florent Kermarrec> |/ * 8a0684b1 - Merge pull request timvideos#604 from antmicro/jboc/axi-lite <enjoy-digital> |\ | * 879e6ffe - soc/interconnect/axi: add basic AXI Lite up-converter <Jędrzej Boczar> | * 32160e61 - soc/interconnect/axi: separate AXI Lite converter channels <Jędrzej Boczar> * | ed721198 - Merge pull request timvideos#603 from enjoy-digital/socdoc-extensions <Sean Cross> |\ \ | * | 29b2baf9 - doc: socdoc: document new `sphinx_extra_config` parameter <Sean Cross> | * | dd366467 - litex: add `sphinx_extra_config` to `generate_docs()` <Sean Cross> * | | 3d16838d - Merge pull request timvideos#602 from enjoy-digital/socdoc-extensions <enjoy-digital> |\| | | * | 7fecfbf8 - doc: socdoc: document `sphinx_extensions` parameter <Sean Cross> |/ / * | 83370399 - CHANGES: update. <Florent Kermarrec> * | 041c7527 - core/cpu: integrate Zynq as a classical CPU (Zynq7000), deprecate SoCZynq. <Florent Kermarrec> |/ * 8bdf6941 - liblitesdcard/sdcard: use max divider of 256 (128 was not enough for the initial 400Khz clock frequency). <Florent Kermarrec> * 8f92034d - CHANGES: update. <Florent Kermarrec> * 99e88dfc - Merge pull request timvideos#600 from antmicro/jboc/axi-lite <enjoy-digital> |\ | * a9d8b813 - test/axi: move all AXI Lite tests to separate file <Jędrzej Boczar> | * 367eb122 - soc/integration: use AXILiteSRAM when using bus_standard="axi-lite" <Jędrzej Boczar> | * 8ae501c3 - test/axi: add crossbar stress tests <Jędrzej Boczar> | * 706bc25d - soc/integration: add bus standard parser arguments <Jędrzej Boczar> | * 32d9e212 - soc/interconnect/axi: improve Timeout module and test it with shared interconnect <Jędrzej Boczar> | * 2cab7fbf - test/axi: add shared AXI Lite interconnect tests <Jędrzej Boczar> | * 3a08b21d - soc/interconnect/axi: implement AXI Lite decoder <Jędrzej Boczar> | * 214cfdca - soc/interconnect/axi: lock AXILiteArbiter until all requests have been responded to <Jędrzej Boczar> | * baf23c9c - test/test_axi: add AXI Lite interconnect arbiter tests <Jędrzej Boczar> | * a8a583d6 - socinterconnect/axi: interconnect shared sketch <Jędrzej Boczar> | * f47ccdae - soc/interconnect/axi: point-to-point interconnect and timeout module with tests <Jędrzej Boczar> | * b4c1120e - soc/integration: choose interconnect based on bus standard <Jędrzej Boczar> | * 69d8dd78 - soc/integration: add axi-lite standard to SoCBusHandler <Jędrzej Boczar> * | d38048ba - soc: add initial DMA bus support (optionally provided by CPU(s) for cache coherency). <Florent Kermarrec> |/ * 2361abb1 - Merge pull request timvideos#599 from antmicro/gen-mmcm-pr <enjoy-digital> |\ | * 66c5f371 - litex-gen: add mmcm core <Piotr Binkowski> * 6b72f52c - boards: keep in sync with litex-boards. <Florent Kermarrec> * 1f27b740 - soc/integration/add_sdcard: add direct connection to VexRiscv's dmabus for testing. <Florent Kermarrec> * 408d1a9f - cpu/vexriscv/system.h: update flush_cpu_dcache. <Florent Kermarrec> * 47ce15b4 - interconnect/wishbone: add minimal UpConverter. <Florent Kermarrec> * litex-boards changed from 2ce24df to 2020.08-9-g63b65e2 * 63b65e2 - crosslink_nx_evn: update copyrights. <Florent Kermarrec> * 153326f - targets/icebreaker: update flash. <Florent Kermarrec> * 795e34a - add initial Crosslink-NX support. <Piense> * 84c19a6 - targets/de0nano: set sys2x_ps phase to 180° for sdram_rate=1:2. <Florent Kermarrec> * 70594a5 - ulx3s: simplify sdram constraints and increase phase to 180 for sdram_rate=1:2. <Florent Kermarrec> * 1781be1 - general: add SPDX License identifier to header and specify files are part of LiteX-Boards. <Florent Kermarrec> * 83d8b8d - platforms/acorn_cle_215: integrated sdcard ios as extension. <Florent Kermarrec> * d365836 - Merge pull request timvideos#100 from connorwk/master <enjoy-digital> |\ | * f328909 - Moved platform call inside of BaseSoC init for compatibility with linux-on-litex-vexriscv support. Added optional spi-sdcard support over P2 header. <connorwk> |/ * 45bb329 - targets/colorlight_5a_75x: enable HalfRate SDRAM PHY. <Florent Kermarrec> * b6a1ad5 - targets/orangecrab: add simple CRG when built without DDR3. <Florent Kermarrec> * 869cead - targets: use platform.request_all on LedChaser. <Florent Kermarrec> * 8583c44 - Merge pull request timvideos#98 from antmicro/arty_pmod_configuration <enjoy-digital> |\ | * d2cd6d4 - arty: Change USB-uart and I2S Pmod configuration <Pawel Sagan> |/ * ee28d7b - targets/ulx3s/add_oled: simplify. <Florent Kermarrec> * 623faa9 - Merge pull request timvideos#96 from pepijndevos/oled <enjoy-digital> |\ | * eba7037 - add optional OLED peripheral to ULX3S target <Pepijn de Vos> |/ * 929e55d - platforms/trellisboard: add SDCard PMOD pins. <Florent Kermarrec> * 5fd3e8d - ecpix5: add SDCard. <Florent Kermarrec> * f058181 - README: fix typo. <Florent Kermarrec> * 94ccf1d - targets/trellisboard: simplify clocking when no DDR3, remove firmware_ram (was here for debug). <Florent Kermarrec> * ecdc1ef - README: add missings . <Florent Kermarrec> * 361afa7 - README: add links to LiteX's wiki. <Florent Kermarrec> * 02c0c0a - README: add board picture and fix a few typos. <Florent Kermarrec> * eb8a484 - targets/de10nano: fix typo. <Florent Kermarrec> * 2cef54a - targets/colorlight_5a_75x: avoid sys_clk_freq of 125MHz with etherbone (no longer required). <Florent Kermarrec> * bfbee48 - Readme/boards: fill most of the missing infos. <Florent Kermarrec> * bb65692 - add LICENSE. <Florent Kermarrec> * e9706d4 - README: add initial contents and list of supported boards. <Florent Kermarrec> * 760b8ff - arty: improve xy_pmod_io genericity (allow selecting the PMOD) and enable SDCard. <Florent Kermarrec> * 04fc98f - de0nano/ulx3s: add sdram HalfRate support (untested). <Florent Kermarrec> * d0ca1be - targets/de10nano/minispartan6: simplify HalfRate support, rename argument to sdram_rate. <Florent Kermarrec> * 9730c6f - platforms/de10nano: use additional sdram constraints required for HalfRate. <Florent Kermarrec> * 7399d13 - paltforms/de10nano/sdram: enable fast input/output on dq. <Florent Kermarrec> * b4b1ab8 - paltforms/de10nano: simplify IO constraints (for consistency with others platforms). <Florent Kermarrec> * 89c5bf4 - Merge pull request timvideos#92 from rob-ng15/master <enjoy-digital> |\ | * 7cda143 - Allow use of HalfRateGENSDRPHY <rob-ng15> | * cf98393 - Add Misc <rob-ng15> * | 1e1589a - zybo_z7: demonstrate use of PS7 (with --cpu-type=zynq7000). <Florent Kermarrec> * | 8a3b453 - add Zybo Z7 minimal platform/targets: no PS7 support and USB-UART PMOD on JB. <Florent Kermarrec> |/ * e723bef - platforms/arty: add usb_uart_pmod_io (USB-UART PMOD on JA) to ease debug with a second UART (for UARTbone/LiteScope). <Florent Kermarrec> * 19d0b95 - platforms/targets: keep in sync with litex. <Florent Kermarrec> * 0ee4b21 - trellisboard/ulx3s: fix sdcard slewrate. <Florent Kermarrec> * 7efa1c3 - platforms/arty: add missing pullups on sdcard. <Florent Kermarrec> * litex-renode changed from f179258 to 3d01f40 * 3d01f40 - Merge pull request timvideos#29 from antmicro/i2c_generation <Mateusz Hołenko> * ed34c42 - generate-renode-scripts: Add I2C support <Mateusz Holenko> * a431211 - generate-zephyr-dts: Add I2C support <Mateusz Holenko> * 9f4f0fb - [FIX] Fix config generation <Mateusz Holenko> * nmigen changed from 8f5a253 to 1ad6e32 * 1ad6e32 - Clifford -> Claire <Sebastien Bourdeauducq> * 40f7f12 - Add option to specify solver in nmigen.test.utils <Donald Sebastian Leung> Full submodule status -- 2942d0652a89646c5225bee15dd55cc3b0871766 VexRiscv (1.0.1-417-g2942d06) 3a6108a75be356a3dc53760d22782f1323248b6b edid-decode (heads/master) 3a06aa84b62ad24467fb0d2c6ceddf565e9ea447 flash_proxies (heads/master) 5c69da5d6db245dedab479509c0eaa8c1c80027c litedram (2020.08-3-g5c69da5) 54acf9fd76c226d7760294ffde86418e52e0951b liteeth (2020.04-26-g54acf9f) efd200fa9e625144131a310fc09fd1fecf1682e6 liteiclink (2020.08-1-gefd200f) 0718fd135fc30e0a3598eaf66ce2fcb54b62193c litepcie (2020.08-1-g0718fd1) ba006a78c12e25354dafb021510c043dbe070614 litesata (2020.08-1-gba006a7) 02b543e5ba24c025212515f6e32f542629d823e8 litescope (2020.08-2-g02b543e) 7457a29b1a47fe15e81fa37f3bbdd510788f1d53 liteusb (heads/master) 41f30143075ece3fff5c33a332ed067d1837cbb3 litevideo (2020.04) 3897acb9e4b91ad58abbcea8e3cff6e44223bd02 litex (2020.04-639-g3897acb9) 63b65e278c279a9cf8c4da31db8f7e845edba394 litex-boards (2020.08-9-g63b65e2) 3d01f408539b4641f9d2b42ebd8237436e49d16b litex-renode (remotes/origin/HEAD) 7bc4eb1387b39159a74c1dbd1b820728e0bfbbaa migen (0.6.dev-354-g7bc4eb1) 1ad6e3207f02e913407867dddddb8f50fad0ced4 nmigen (v0.1-71-g1ad6e32) 48333804e40c7c9c1c8d5b2e70ba75f4b646d8f0 pythondata-cpu-lm32 (2020.08) 4731142284cf87e89b21fb35ceff1139f2f89227 pythondata-cpu-minerva (2020.08) af561171f5fc8c684537897f12ef0f429e38624b pythondata-cpu-mor1kx (2020.08) 88974894c800ee2e827db47865e0611a07ff40d7 pythondata-cpu-picorv32 (2020.08) 654057b2f5cec0f9fc99487dff67861f76fcbe7e pythondata-cpu-vexriscv (2020.08) 7cfcaed2e726027fd622650b58dd77e47c495ee0 pythondata-software-compiler_rt (2020.08) da4c8c72eeb22894369b3936abb73f828f222b8e valentyusb (v0.3.3-195-gda4c8c7)

todo bot assigned cr1901 Oct 31, 2018

todo bot added the todo 🗒️ label Oct 31, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Inferred tristate not currently supported by nextpnr; upgrade #96

Inferred tristate not currently supported by nextpnr; upgrade #96

todo bot commented Oct 31, 2018

Inferred tristate not currently supported by nextpnr; upgrade #96

Inferred tristate not currently supported by nextpnr; upgrade #96

Comments

todo bot commented Oct 31, 2018

This issue was generated by todo based on a TODO comment in f6daba4 when #95 was merged. cc @cr1901.

This issue was generated by todo based on a `TODO` comment in `f6daba4` when #95 was merged. cc @cr1901.