Update README #167
Open
Update README #167
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Pull requests aren't accepted on GitHub. Cheers, On Mon, Mar 9, 2015 at 1:33 PM, Siddhartha Sharma notifications@github.com
|
|
Got to know after few edits here. 💯 Cheers! |
tylerwhall
pushed a commit
to tylerwhall/linux
that referenced
this pull request
Mar 25, 2015
…m_pages commit 47bc59c upstream. sg_alloc_table_from_pages() only allocates a sg_table, so it should just use GFP_KERNEL, not gfp_flags. If gfp_flags contains __GFP_DMA32 then mm/sl[au]b.c will call BUG_ON: [ 358.027515] ------------[ cut here ]------------ [ 358.027546] kernel BUG at mm/slub.c:1416! [ 358.027558] invalid opcode: 0000 [#1] PREEMPT SMP [ 358.027576] Modules linked in: mt2131 s5h1409 tda8290 tuner cx25840 cx23885 btcx_risc altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core nouveau zr36067 videocodec v4l2_common videodev media x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 358.027712] CPU: 19 PID: 3654 Comm: cat Not tainted 3.16.0-rc6-telek torvalds#167 [ 358.027723] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 358.027741] task: ffff880897c7d960 ti: ffff88089b4d4000 task.ti: ffff88089b4d4000 [ 358.027753] RIP: 0010:[<ffffffff81196040>] [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.027776] RSP: 0018:ffff88089b4d7ae8 EFLAGS: 00010002 [ 358.027787] RAX: ffff880897c7d960 RBX: 0000000000000000 RCX: ffff88089b4d7b50 [ 358.027798] RDX: 00000000ffffffff RSI: 0000000000000004 RDI: ffff88089f803b00 [ 358.027809] RBP: ffff88089b4d7bb8 R08: 0000000000000000 R09: 0000000100400040 [ 358.027821] R10: 0000160000000000 R11: ffff88109bc02c40 R12: 0000000000000001 [ 358.027832] R13: ffff88089f8000c0 R14: ffff88089f803b00 R15: ffff8810bfcf4be0 [ 358.027845] FS: 00007f83fe5c0700(0000) GS:ffff8810bfce0000(0000) knlGS:0000000000000000 [ 358.027858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.027868] CR2: 0000000001dfd568 CR3: 0000001097d5a000 CR4: 00000000000407e0 [ 358.027878] Stack: [ 358.027885] ffffffff81198860 ffff8810bfcf4be0 ffff880897c7d960 0000000000001b00 [ 358.027905] ffff880897c7d960 0000000000000000 ffff8810bfcf4bf0 0000000000000000 [ 358.027924] 0000000000000000 0000000100000100 ffffffff813ef84a 00000004ffffffff [ 358.027944] Call Trace: [ 358.027956] [<ffffffff81198860>] ? __slab_alloc+0x400/0x4e0 [ 358.027973] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.027985] [<ffffffff81198f17>] __kmalloc+0x127/0x150 [ 358.027997] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.028009] [<ffffffff813ef84a>] sg_kmalloc+0x1a/0x30 [ 358.028023] [<ffffffff813eff84>] __sg_alloc_table+0x74/0x180 [ 358.028035] [<ffffffff813ef830>] ? sg_kfree+0x20/0x20 [ 358.028048] [<ffffffff813f00af>] sg_alloc_table+0x1f/0x60 [ 358.028061] [<ffffffff813f0174>] sg_alloc_table_from_pages+0x84/0x1f0 [ 358.028077] [<ffffffffa007c3f9>] vb2_dma_sg_alloc+0x159/0x230 [videobuf2_dma_sg] [ 358.028095] [<ffffffffa003d55a>] __vb2_queue_alloc+0x10a/0x680 [videobuf2_core] [ 358.028113] [<ffffffffa003e110>] __reqbufs.isra.14+0x220/0x3e0 [videobuf2_core] [ 358.028130] [<ffffffffa003e79d>] __vb2_init_fileio+0xbd/0x380 [videobuf2_core] [ 358.028147] [<ffffffffa003f563>] __vb2_perform_fileio+0x5b3/0x6e0 [videobuf2_core] [ 358.028164] [<ffffffffa003f871>] vb2_fop_read+0xb1/0x100 [videobuf2_core] [ 358.028184] [<ffffffffa06dd2e5>] v4l2_read+0x65/0xb0 [videodev] [ 358.028198] [<ffffffff811a243f>] vfs_read+0x8f/0x170 [ 358.028210] [<ffffffff811a30a1>] SyS_read+0x41/0xb0 [ 358.028224] [<ffffffff818f02e9>] system_call_fastpath+0x16/0x1b [ 358.028234] Code: 66 90 e9 dc fd ff ff 0f 1f 40 00 41 8b 4d 68 e9 d5 fe ff ff 0f 1f 80 00 00 00 00 f0 41 80 4d 00 40 e9 03 ff ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 44 89 c6 4c 89 45 d0 e8 0c 82 ff ff 48 [ 358.028415] RIP [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.028432] RSP <ffff88089b4d7ae8> [ 358.032208] ---[ end trace 6443240199c706e4 ]--- Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xin3liang
pushed a commit
to xin3liang/linux
that referenced
this pull request
Jan 18, 2016
workaround for bootup blanking issue
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Dec 20, 2016
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Dec 26, 2016
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 4, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 4, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
norov
pushed a commit
to norov/linux
that referenced
this pull request
Jan 6, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
norov
pushed a commit
to norov/linux
that referenced
this pull request
Jan 9, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 11, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 12, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 16, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 17, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ddstreet
pushed a commit
to ddstreet/linux
that referenced
this pull request
Jan 19, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 23, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 23, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 25, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 25, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jan 30, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
laijs
pushed a commit
to laijs/linux
that referenced
this pull request
Feb 13, 2017
lkl: fix close disk in boot.c
keryell
pushed a commit
to keryell/linux
that referenced
this pull request
Feb 27, 2017
…the-idr-checkpatch-fixes
WARNING: braces {} are not necessary for single statement blocks
torvalds#143: FILE: tools/testing/radix-tree/idr-test.c:88:
+ for (i = 0; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 0, 0, GFP_KERNEL) == i);
+ }
WARNING: braces {} are not necessary for single statement blocks
torvalds#167: FILE: tools/testing/radix-tree/idr-test.c:112:
+ for (i = 1; i < 10; i++) {
+ assert(idr_alloc(&idr, NULL, 1, 0, GFP_KERNEL) == i);
+ }
total: 0 errors, 2 warnings, 159 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
./patches/reimplement-idr-and-ida-using-the-radix-tree-support-storing-null-in-the-idr.patch has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
Please run checkpatch prior to sending patches
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 11, 2018
WARNING: 'numner' may be misspelled - perhaps 'number'? torvalds#159: FILE: mm/sparse.c:591: + /* The numner of present sections stored in nr_present_sections WARNING: Block comments use a trailing */ on a separate line torvalds#167: FILE: mm/sparse.c:599: + * correctly. */ WARNING: line over 80 characters torvalds#219: FILE: mm/sparse-vmemmap.c:299: + map_map[nr_consumed_maps] = sparse_mem_map_populate(pnum, nodeid, NULL); total: 0 errors, 3 warnings, 149 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-sparse-optimize-memmap-allocation-during-sparse_init.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 16, 2018
WARNING: 'numner' may be misspelled - perhaps 'number'? torvalds#159: FILE: mm/sparse.c:591: + /* The numner of present sections stored in nr_present_sections WARNING: Block comments use a trailing */ on a separate line torvalds#167: FILE: mm/sparse.c:599: + * correctly. */ WARNING: line over 80 characters torvalds#219: FILE: mm/sparse-vmemmap.c:299: + map_map[nr_consumed_maps] = sparse_mem_map_populate(pnum, nodeid, NULL); total: 0 errors, 3 warnings, 149 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-sparse-optimize-memmap-allocation-during-sparse_init.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 24, 2018
WARNING: 'numner' may be misspelled - perhaps 'number'? torvalds#159: FILE: mm/sparse.c:591: + /* The numner of present sections stored in nr_present_sections WARNING: Block comments use a trailing */ on a separate line torvalds#167: FILE: mm/sparse.c:599: + * correctly. */ WARNING: line over 80 characters torvalds#219: FILE: mm/sparse-vmemmap.c:299: + map_map[nr_consumed_maps] = sparse_mem_map_populate(pnum, nodeid, NULL); total: 0 errors, 3 warnings, 149 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-sparse-optimize-memmap-allocation-during-sparse_init.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 28, 2018
WARNING: 'numner' may be misspelled - perhaps 'number'? torvalds#159: FILE: mm/sparse.c:591: + /* The numner of present sections stored in nr_present_sections WARNING: Block comments use a trailing */ on a separate line torvalds#167: FILE: mm/sparse.c:599: + * correctly. */ WARNING: line over 80 characters torvalds#219: FILE: mm/sparse-vmemmap.c:299: + map_map[nr_consumed_maps] = sparse_mem_map_populate(pnum, nodeid, NULL); total: 0 errors, 3 warnings, 149 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-sparse-optimize-memmap-allocation-during-sparse_init.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
torvalds
pushed a commit
that referenced
this pull request
Aug 2, 2018
syzbot found that the following sequence produces a LOCKDEP splat [1] ip link add bond10 type bond ip link add bond11 type bond ip link set bond11 master bond10 To fix this, we can use the already provided nest_level. This patch also provides correct nesting for dev->addr_list_lock [1] WARNING: possible recursive locking detected 4.18.0-rc6+ #167 Not tainted -------------------------------------------- syz-executor751/4439 is trying to acquire lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 but task is already holding lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&bond->stats_lock)->rlock); lock(&(&bond->stats_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor751/4439: #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215 stack backtrace: CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline] check_deadlock kernel/locking/lockdep.c:1809 [inline] validate_chain kernel/locking/lockdep.c:2405 [inline] __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:310 [inline] bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline] rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716 notifier_call_chain+0x180/0x390 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735 call_netdevice_notifiers net/core/dev.c:1753 [inline] netdev_features_change net/core/dev.c:1321 [inline] netdev_change_features+0xb3/0x110 net/core/dev.c:7759 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992 sock_ioctl+0x30d/0x680 net/socket.c:1093 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440859 Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859 RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390 R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Aug 2, 2018
WARNING: 'numner' may be misspelled - perhaps 'number'? torvalds#159: FILE: mm/sparse.c:591: + /* The numner of present sections stored in nr_present_sections WARNING: Block comments use a trailing */ on a separate line torvalds#167: FILE: mm/sparse.c:599: + * correctly. */ WARNING: line over 80 characters torvalds#219: FILE: mm/sparse-vmemmap.c:299: + map_map[nr_consumed_maps] = sparse_mem_map_populate(pnum, nodeid, NULL); total: 0 errors, 3 warnings, 149 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-sparse-optimize-memmap-allocation-during-sparse_init.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 6, 2019
ERROR: "(foo*)" should be "(foo *)" torvalds#167: FILE: mm/oom_kill.c:985: + (void*) message); total: 1 errors, 0 warnings, 128 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-oom-remove-prefer-children-over-parent-heuristic.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
May 27, 2020
this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ torvalds#167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera <ivecera@redhat.com> Fixes: ec97ecf ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <dcaratti@redhat.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
May 27, 2020
this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ torvalds#167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera <ivecera@redhat.com> Fixes: ec97ecf ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
snajpa
pushed a commit
to vpsfreecz/linux
that referenced
this pull request
Jun 11, 2020
[ Upstream commit bb2f930 ] this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ torvalds#167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera <ivecera@redhat.com> Fixes: ec97ecf ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skalk
pushed a commit
to skalk/linux
that referenced
this pull request
Jun 26, 2020
this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ torvalds#167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera <ivecera@redhat.com> Fixes: ec97ecf ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
igoropaniuk
pushed a commit
to igoropaniuk/linux
that referenced
this pull request
Nov 18, 2020
Update 5.4-2.1.x-imx to v5.4.75 from stable
chombourger
pushed a commit
to chombourger/linux
that referenced
this pull request
Feb 16, 2021
…from PLSDK-2839 to processor-sdk-linux-4.19.y * commit '4386ea04787e544e4c3518d8f8a838f57d6b57c6': Revert "arm64:dts:ti:remoteproc: add msmc-sram"
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 12, 2021
This commit fixes the following checkpatch.pl warnings:
WARNING: do not add new typedefs
torvalds#47: FILE: hal/HalBtcOutSrc.h:47:
+typedef enum _BTC_POWERSAVE_TYPE {
WARNING: do not add new typedefs
torvalds#54: FILE: hal/HalBtcOutSrc.h:54:
+typedef enum _BTC_BT_REG_TYPE {
WARNING: do not add new typedefs
torvalds#63: FILE: hal/HalBtcOutSrc.h:63:
+typedef enum _BTC_CHIP_INTERFACE {
WARNING: do not add new typedefs
torvalds#71: FILE: hal/HalBtcOutSrc.h:71:
+typedef enum _BTC_CHIP_TYPE {
WARNING: do not add new typedefs
torvalds#81: FILE: hal/HalBtcOutSrc.h:81:
+typedef enum _BTC_MSG_TYPE {
WARNING: do not add new typedefs
torvalds#167: FILE: hal/HalBtcOutSrc.h:167:
+typedef struct _BTC_BOARD_INFO {
WARNING: do not add new typedefs
torvalds#177: FILE: hal/HalBtcOutSrc.h:177:
+typedef enum _BTC_DBG_OPCODE {
WARNING: do not add new typedefs
torvalds#187: FILE: hal/HalBtcOutSrc.h:187:
+typedef enum _BTC_RSSI_STATE {
WARNING: do not add new typedefs
torvalds#200: FILE: hal/HalBtcOutSrc.h:200:
+typedef enum _BTC_WIFI_ROLE {
WARNING: do not add new typedefs
torvalds#208: FILE: hal/HalBtcOutSrc.h:208:
+typedef enum _BTC_WIFI_BW_MODE {
WARNING: do not add new typedefs
torvalds#215: FILE: hal/HalBtcOutSrc.h:215:
+typedef enum _BTC_WIFI_TRAFFIC_DIR {
WARNING: do not add new typedefs
torvalds#221: FILE: hal/HalBtcOutSrc.h:221:
+typedef enum _BTC_WIFI_PNP {
WARNING: do not add new typedefs
torvalds#228: FILE: hal/HalBtcOutSrc.h:228:
+typedef enum _BT_WIFI_COEX_STATE {
WARNING: do not add new typedefs
torvalds#239: FILE: hal/HalBtcOutSrc.h:239:
+typedef enum _BTC_GET_TYPE {
WARNING: do not add new typedefs
torvalds#281: FILE: hal/HalBtcOutSrc.h:281:
+typedef enum _BTC_SET_TYPE {
WARNING: do not add new typedefs
torvalds#321: FILE: hal/HalBtcOutSrc.h:321:
+typedef enum _BTC_DBG_DISP_TYPE {
WARNING: do not add new typedefs
torvalds#328: FILE: hal/HalBtcOutSrc.h:328:
+typedef enum _BTC_NOTIFY_TYPE_IPS {
WARNING: do not add new typedefs
torvalds#334: FILE: hal/HalBtcOutSrc.h:334:
+typedef enum _BTC_NOTIFY_TYPE_LPS {
WARNING: do not add new typedefs
torvalds#340: FILE: hal/HalBtcOutSrc.h:340:
+typedef enum _BTC_NOTIFY_TYPE_SCAN {
WARNING: do not add new typedefs
torvalds#346: FILE: hal/HalBtcOutSrc.h:346:
+typedef enum _BTC_NOTIFY_TYPE_ASSOCIATE {
WARNING: do not add new typedefs
torvalds#352: FILE: hal/HalBtcOutSrc.h:352:
+typedef enum _BTC_NOTIFY_TYPE_MEDIA_STATUS {
WARNING: do not add new typedefs
torvalds#358: FILE: hal/HalBtcOutSrc.h:358:
+typedef enum _BTC_NOTIFY_TYPE_SPECIAL_PACKET {
WARNING: do not add new typedefs
torvalds#366: FILE: hal/HalBtcOutSrc.h:366:
+typedef enum _BTC_NOTIFY_TYPE_STACK_OPERATION {
WARNING: do not add new typedefs
torvalds#374: FILE: hal/HalBtcOutSrc.h:374:
+typedef enum _BTC_ANTENNA_POS {
WARNING: do not add new typedefs
torvalds#412: FILE: hal/HalBtcOutSrc.h:412:
+typedef struct _BTC_BT_INFO {
WARNING: do not add new typedefs
torvalds#440: FILE: hal/HalBtcOutSrc.h:440:
+typedef struct _BTC_STACK_INFO {
WARNING: do not add new typedefs
torvalds#455: FILE: hal/HalBtcOutSrc.h:455:
+typedef struct _BTC_BT_LINK_INFO {
WARNING: do not add new typedefs
torvalds#468: FILE: hal/HalBtcOutSrc.h:468:
+typedef struct _BTC_STATISTICS {
WARNING: do not add new typedefs
torvalds#487: FILE: hal/HalBtcOutSrc.h:487:
+typedef struct _BTC_COEXIST {
Signed-off-by: Marco Cesati <marco.cesati@gmail.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 13, 2021
This commit fixes the following checkpatch.pl warnings:
WARNING: do not add new typedefs
torvalds#47: FILE: hal/HalBtcOutSrc.h:47:
+typedef enum _BTC_POWERSAVE_TYPE {
WARNING: do not add new typedefs
torvalds#54: FILE: hal/HalBtcOutSrc.h:54:
+typedef enum _BTC_BT_REG_TYPE {
WARNING: do not add new typedefs
torvalds#63: FILE: hal/HalBtcOutSrc.h:63:
+typedef enum _BTC_CHIP_INTERFACE {
WARNING: do not add new typedefs
torvalds#71: FILE: hal/HalBtcOutSrc.h:71:
+typedef enum _BTC_CHIP_TYPE {
WARNING: do not add new typedefs
torvalds#81: FILE: hal/HalBtcOutSrc.h:81:
+typedef enum _BTC_MSG_TYPE {
WARNING: do not add new typedefs
torvalds#167: FILE: hal/HalBtcOutSrc.h:167:
+typedef struct _BTC_BOARD_INFO {
WARNING: do not add new typedefs
torvalds#177: FILE: hal/HalBtcOutSrc.h:177:
+typedef enum _BTC_DBG_OPCODE {
WARNING: do not add new typedefs
torvalds#187: FILE: hal/HalBtcOutSrc.h:187:
+typedef enum _BTC_RSSI_STATE {
WARNING: do not add new typedefs
torvalds#200: FILE: hal/HalBtcOutSrc.h:200:
+typedef enum _BTC_WIFI_ROLE {
WARNING: do not add new typedefs
torvalds#208: FILE: hal/HalBtcOutSrc.h:208:
+typedef enum _BTC_WIFI_BW_MODE {
WARNING: do not add new typedefs
torvalds#215: FILE: hal/HalBtcOutSrc.h:215:
+typedef enum _BTC_WIFI_TRAFFIC_DIR {
WARNING: do not add new typedefs
torvalds#221: FILE: hal/HalBtcOutSrc.h:221:
+typedef enum _BTC_WIFI_PNP {
WARNING: do not add new typedefs
torvalds#228: FILE: hal/HalBtcOutSrc.h:228:
+typedef enum _BT_WIFI_COEX_STATE {
WARNING: do not add new typedefs
torvalds#239: FILE: hal/HalBtcOutSrc.h:239:
+typedef enum _BTC_GET_TYPE {
WARNING: do not add new typedefs
torvalds#281: FILE: hal/HalBtcOutSrc.h:281:
+typedef enum _BTC_SET_TYPE {
WARNING: do not add new typedefs
torvalds#321: FILE: hal/HalBtcOutSrc.h:321:
+typedef enum _BTC_DBG_DISP_TYPE {
WARNING: do not add new typedefs
torvalds#328: FILE: hal/HalBtcOutSrc.h:328:
+typedef enum _BTC_NOTIFY_TYPE_IPS {
WARNING: do not add new typedefs
torvalds#334: FILE: hal/HalBtcOutSrc.h:334:
+typedef enum _BTC_NOTIFY_TYPE_LPS {
WARNING: do not add new typedefs
torvalds#340: FILE: hal/HalBtcOutSrc.h:340:
+typedef enum _BTC_NOTIFY_TYPE_SCAN {
WARNING: do not add new typedefs
torvalds#346: FILE: hal/HalBtcOutSrc.h:346:
+typedef enum _BTC_NOTIFY_TYPE_ASSOCIATE {
WARNING: do not add new typedefs
torvalds#352: FILE: hal/HalBtcOutSrc.h:352:
+typedef enum _BTC_NOTIFY_TYPE_MEDIA_STATUS {
WARNING: do not add new typedefs
torvalds#358: FILE: hal/HalBtcOutSrc.h:358:
+typedef enum _BTC_NOTIFY_TYPE_SPECIAL_PACKET {
WARNING: do not add new typedefs
torvalds#366: FILE: hal/HalBtcOutSrc.h:366:
+typedef enum _BTC_NOTIFY_TYPE_STACK_OPERATION {
WARNING: do not add new typedefs
torvalds#374: FILE: hal/HalBtcOutSrc.h:374:
+typedef enum _BTC_ANTENNA_POS {
WARNING: do not add new typedefs
torvalds#412: FILE: hal/HalBtcOutSrc.h:412:
+typedef struct _BTC_BT_INFO {
WARNING: do not add new typedefs
torvalds#440: FILE: hal/HalBtcOutSrc.h:440:
+typedef struct _BTC_STACK_INFO {
WARNING: do not add new typedefs
torvalds#455: FILE: hal/HalBtcOutSrc.h:455:
+typedef struct _BTC_BT_LINK_INFO {
WARNING: do not add new typedefs
torvalds#468: FILE: hal/HalBtcOutSrc.h:468:
+typedef struct _BTC_STATISTICS {
WARNING: do not add new typedefs
torvalds#487: FILE: hal/HalBtcOutSrc.h:487:
+typedef struct _BTC_COEXIST {
Signed-off-by: Marco Cesati <marco.cesati@gmail.com>
Link: https://lore.kernel.org/r/20210312082638.25512-2-marco.cesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 15, 2021
This commit fixes the following checkpatch.pl errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#75: FILE: ./include/hal_com_phycfg.h:75:
+struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#95: FILE: ./include/hal_com_phycfg.h:95:
+ u8* RateIndex,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#96: FILE: ./include/hal_com_phycfg.h:96:
+ s8* PwrByRateVal,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#97: FILE: ./include/hal_com_phycfg.h:97:
+ u8* RateNum
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#107: FILE: ./include/hal_com_phycfg.h:107:
+struct adapter * padapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#141: FILE: ./include/hal_com_phycfg.h:141:
+struct adapter * padapter,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#145: FILE: ./include/hal_com_phycfg.h:145:
+u8* Rates,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#167: FILE: ./include/hal_com_phycfg.h:167:
+ struct adapter * padapter
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#172: FILE: ./include/hal_com_phycfg.h:172:
+struct adapter * padapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#189: FILE: ./include/hal_com_phycfg.h:189:
+struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#201: FILE: ./include/hal_com_phycfg.h:201:
+struct adapter * Adapter
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#206: FILE: ./include/hal_com_phycfg.h:206:
+struct adapter * Adapter
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#218: FILE: ./include/hal_com_phycfg.h:218:
+struct adapter * Adapter,
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Mar 16, 2021
This commit fixes the following checkpatch.pl errors:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#75: FILE: ./include/hal_com_phycfg.h:75:
+struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#95: FILE: ./include/hal_com_phycfg.h:95:
+ u8* RateIndex,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#96: FILE: ./include/hal_com_phycfg.h:96:
+ s8* PwrByRateVal,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#97: FILE: ./include/hal_com_phycfg.h:97:
+ u8* RateNum
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#107: FILE: ./include/hal_com_phycfg.h:107:
+struct adapter * padapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#141: FILE: ./include/hal_com_phycfg.h:141:
+struct adapter * padapter,
ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar"
torvalds#145: FILE: ./include/hal_com_phycfg.h:145:
+u8* Rates,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#167: FILE: ./include/hal_com_phycfg.h:167:
+ struct adapter * padapter
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#172: FILE: ./include/hal_com_phycfg.h:172:
+struct adapter * padapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#189: FILE: ./include/hal_com_phycfg.h:189:
+struct adapter * Adapter,
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#201: FILE: ./include/hal_com_phycfg.h:201:
+struct adapter * Adapter
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#206: FILE: ./include/hal_com_phycfg.h:206:
+struct adapter * Adapter
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
torvalds#218: FILE: ./include/hal_com_phycfg.h:218:
+struct adapter * Adapter,
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210315170618.2566-44-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Apr 23, 2021
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Apr 26, 2021
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Acked-by: Lorenz Bauer <lmb@cloudflare.com> Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Apr 27, 2021
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org
nareshkamboju
pushed a commit
to nareshkamboju/linux
that referenced
this pull request
May 13, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
nareshkamboju
pushed a commit
to nareshkamboju/linux
that referenced
this pull request
May 13, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
intersectRaven
pushed a commit
to intersectRaven/linux
that referenced
this pull request
May 14, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
snajpa
pushed a commit
to vpsfreecz/linux
that referenced
this pull request
May 18, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 28, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== torvalds#45: core_reloc: insn torvalds#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 torvalds#46: core_reloc: insn torvalds#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#47: core_reloc: insn torvalds#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#48: core_reloc: insn torvalds#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#49: core_reloc: insn torvalds#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== torvalds#30: core_reloc: insn torvalds#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 torvalds#31: core_reloc: insn torvalds#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
jackpot51
referenced
this pull request
in pop-os/linux
Jun 22, 2021
BugLink: https://bugs.launchpad.net/bugs/1929455 [ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
staging-kernelci-org
pushed a commit
to kernelci/linux
that referenced
this pull request
Aug 3, 2021
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-torvalds#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-torvalds#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
torvalds
pushed a commit
that referenced
this pull request
Aug 6, 2021
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vlsunil
pushed a commit
to ventana-micro-systems/RISC-V-Linux
that referenced
this pull request
Nov 23, 2021
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-torvalds#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-torvalds#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
paralin
pushed a commit
to skiffos/linux
that referenced
this pull request
Aug 31, 2022
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-torvalds#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-torvalds#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 3, 2022
PD#150094: driver defect clean up: torvalds#32 torvalds#86 torvalds#90 torvalds#92 torvalds#97 torvalds#101 torvalds#103 torvalds#152 torvalds#155 torvalds#157~torvalds#158 torvalds#164 torvalds#167 torvalds#169~torvalds#179 torvalds#187~torvalds#191 torvalds#193~torvalds#199 torvalds#201~torvalds#210 torvalds#212~torvalds#213 torvalds#316~torvalds#319 torvalds#385 torvalds#572 torvalds#693~torvalds#694 torvalds#696~torvalds#697 Change-Id: I9669e5c0d717ee2287faf57a271ff27692039802 Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 4, 2022
PD#150094: driver defect clean up: torvalds#32 torvalds#86 torvalds#90 torvalds#92 torvalds#97 torvalds#101 torvalds#103 torvalds#152 torvalds#155 torvalds#157~torvalds#158 torvalds#164 torvalds#167 torvalds#169~torvalds#179 torvalds#187~torvalds#191 torvalds#193~torvalds#199 torvalds#201~torvalds#210 torvalds#212~torvalds#213 torvalds#316~torvalds#319 torvalds#385 torvalds#572 torvalds#693~torvalds#694 torvalds#696~torvalds#697 Change-Id: I9669e5c0d717ee2287faf57a271ff27692039802 Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Jul 30, 2023
Add rk3399 cpuinfo node to get serial number. We can get CPU serial number from /proc/cpuinfo. Signed-off-by: Stephen Chen <stephen@radxa.com>
Tr0py
pushed a commit
to Tr0py/linux-vpm
that referenced
this pull request
Mar 28, 2024
…om_pages sg_alloc_table_from_pages() only allocates a sg_table, so it should just use GFP_KERNEL, not gfp_flags. If gfp_flags contains __GFP_DMA32 then mm/sl[au]b.c will call BUG_ON: [ 358.027515] ------------[ cut here ]------------ [ 358.027546] kernel BUG at mm/slub.c:1416! [ 358.027558] invalid opcode: 0000 [#1] PREEMPT SMP [ 358.027576] Modules linked in: mt2131 s5h1409 tda8290 tuner cx25840 cx23885 btcx_risc altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core nouveau zr36067 videocodec v4l2_common videodev media x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 358.027712] CPU: 19 PID: 3654 Comm: cat Not tainted 3.16.0-rc6-telek torvalds#167 [ 358.027723] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 358.027741] task: ffff880897c7d960 ti: ffff88089b4d4000 task.ti: ffff88089b4d4000 [ 358.027753] RIP: 0010:[<ffffffff81196040>] [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.027776] RSP: 0018:ffff88089b4d7ae8 EFLAGS: 00010002 [ 358.027787] RAX: ffff880897c7d960 RBX: 0000000000000000 RCX: ffff88089b4d7b50 [ 358.027798] RDX: 00000000ffffffff RSI: 0000000000000004 RDI: ffff88089f803b00 [ 358.027809] RBP: ffff88089b4d7bb8 R08: 0000000000000000 R09: 0000000100400040 [ 358.027821] R10: 0000160000000000 R11: ffff88109bc02c40 R12: 0000000000000001 [ 358.027832] R13: ffff88089f8000c0 R14: ffff88089f803b00 R15: ffff8810bfcf4be0 [ 358.027845] FS: 00007f83fe5c0700(0000) GS:ffff8810bfce0000(0000) knlGS:0000000000000000 [ 358.027858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.027868] CR2: 0000000001dfd568 CR3: 0000001097d5a000 CR4: 00000000000407e0 [ 358.027878] Stack: [ 358.027885] ffffffff81198860 ffff8810bfcf4be0 ffff880897c7d960 0000000000001b00 [ 358.027905] ffff880897c7d960 0000000000000000 ffff8810bfcf4bf0 0000000000000000 [ 358.027924] 0000000000000000 0000000100000100 ffffffff813ef84a 00000004ffffffff [ 358.027944] Call Trace: [ 358.027956] [<ffffffff81198860>] ? __slab_alloc+0x400/0x4e0 [ 358.027973] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.027985] [<ffffffff81198f17>] __kmalloc+0x127/0x150 [ 358.027997] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.028009] [<ffffffff813ef84a>] sg_kmalloc+0x1a/0x30 [ 358.028023] [<ffffffff813eff84>] __sg_alloc_table+0x74/0x180 [ 358.028035] [<ffffffff813ef830>] ? sg_kfree+0x20/0x20 [ 358.028048] [<ffffffff813f00af>] sg_alloc_table+0x1f/0x60 [ 358.028061] [<ffffffff813f0174>] sg_alloc_table_from_pages+0x84/0x1f0 [ 358.028077] [<ffffffffa007c3f9>] vb2_dma_sg_alloc+0x159/0x230 [videobuf2_dma_sg] [ 358.028095] [<ffffffffa003d55a>] __vb2_queue_alloc+0x10a/0x680 [videobuf2_core] [ 358.028113] [<ffffffffa003e110>] __reqbufs.isra.14+0x220/0x3e0 [videobuf2_core] [ 358.028130] [<ffffffffa003e79d>] __vb2_init_fileio+0xbd/0x380 [videobuf2_core] [ 358.028147] [<ffffffffa003f563>] __vb2_perform_fileio+0x5b3/0x6e0 [videobuf2_core] [ 358.028164] [<ffffffffa003f871>] vb2_fop_read+0xb1/0x100 [videobuf2_core] [ 358.028184] [<ffffffffa06dd2e5>] v4l2_read+0x65/0xb0 [videodev] [ 358.028198] [<ffffffff811a243f>] vfs_read+0x8f/0x170 [ 358.028210] [<ffffffff811a30a1>] SyS_read+0x41/0xb0 [ 358.028224] [<ffffffff818f02e9>] system_call_fastpath+0x16/0x1b [ 358.028234] Code: 66 90 e9 dc fd ff ff 0f 1f 40 00 41 8b 4d 68 e9 d5 fe ff ff 0f 1f 80 00 00 00 00 f0 41 80 4d 00 40 e9 03 ff ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 44 89 c6 4c 89 45 d0 e8 0c 82 ff ff 48 [ 358.028415] RIP [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.028432] RSP <ffff88089b4d7ae8> [ 358.032208] ---[ end trace 6443240199c706e4 ]--- Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.13 and up Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Jul 4, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 torvalds#77/1 d_path/basic:FAIL torvalds#77/2 d_path/check_rdonly_mem:OK torvalds#77/3 d_path/check_alloc_mem:OK torvalds#77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 torvalds#167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 torvalds#277/1 ringbuf/ringbuf:FAIL torvalds#277/2 ringbuf/ringbuf_n:SKIP torvalds#277/3 ringbuf/ringbuf_map_key:SKIP torvalds#277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 torvalds#382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 torvalds#384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 torvalds#397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' torvalds#77/1 d_path/basic:SKIP torvalds#77/2 d_path/check_rdonly_mem:OK torvalds#77/3 d_path/check_alloc_mem:OK torvalds#77 d_path:OK (SKIP: 1/3) ... ... torvalds#167 module_attach:SKIP ... ... torvalds#277/1 ringbuf/ringbuf:SKIP torvalds#277/2 ringbuf/ringbuf_n:SKIP torvalds#277/3 ringbuf/ringbuf_map_key:SKIP torvalds#277 ringbuf:SKIP ... ... torvalds#382 test_bprm_opts:SKIP ... ... torvalds#384 test_ima:SKIP ... ... torvalds#397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Jul 5, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 torvalds#77/1 d_path/basic:FAIL torvalds#77/2 d_path/check_rdonly_mem:OK torvalds#77/3 d_path/check_alloc_mem:OK torvalds#77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 torvalds#167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 torvalds#277/1 ringbuf/ringbuf:FAIL torvalds#277/2 ringbuf/ringbuf_n:SKIP torvalds#277/3 ringbuf/ringbuf_map_key:SKIP torvalds#277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 torvalds#382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 torvalds#384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 torvalds#397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' torvalds#77/1 d_path/basic:SKIP torvalds#77/2 d_path/check_rdonly_mem:OK torvalds#77/3 d_path/check_alloc_mem:OK torvalds#77 d_path:OK (SKIP: 1/3) ... ... torvalds#167 module_attach:SKIP ... ... torvalds#277/1 ringbuf/ringbuf:SKIP torvalds#277/2 ringbuf/ringbuf_n:SKIP torvalds#277/3 ringbuf/ringbuf_map_key:SKIP torvalds#277 ringbuf:SKIP ... ... torvalds#382 test_bprm_opts:SKIP ... ... torvalds#384 test_ima:SKIP ... ... torvalds#397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Added ftp://ftp.kernel.org/pub/linux/kernel